NOX E Datasheets

7/28/2019 NOX E Datasheets

1/12

NOX EMAdata sheets

Content may change without prior notice.

edited byNOX Systems AGAlvierweg 179490 VaduzPrincipality of Liechtenstein

Tel +423 370 25 25Fax +423 370 25 26

[email protected]

EN 50130-4

NOX data sheets, December 03, p 1 of 12
mailto:[email protected]:[email protected]


2/12

central unit data sheet

NOX central

a) NOXCPU

NOXCPU main board with bus input from

power supply, MMC card slot, Ethernet RJ-

45 socket and three NOX bus outputs to

connect all other NOX Systems devices.


MMC slot

backupbattery

power in / bus 3

Etherne

bus 3

bus 2

bus 1

NOXPSU power supply

NOXCPU

NOXMIO

2x 17 Ah accumulators


3/12

technical data:

min. nom. max.

supply voltage (VBUS) VDC 14.25 15.0 15.75

power consumption at 15 VDC mA ? ?

operating temperature range C 0 25 40

air humidity at +40C (non

condensing)

% rel. h 93

dimensions (L x B x H): mm 640 x 404 x 105

fuses (F1 to F4) 1A slow-blow order no.: 154.001T

maximum bus output current (bus 1to 3)

A 2.5

terminal assignment:

plugs description

terminal P1 MMC connector

terminal P2 RJ45 Ethernet connection

BAT1 Lithium battery CR2032S1 CPU reset button

terminal P7 + - A B

pin 15 5% VDC GND Bus A Bus B

description input from PSU device

terminal P3 + - A B

pin 15 5% VDC GND Bus A Bus B

description supply voltage (VBUS) bus connection

terminal P4 + - A Bpin 15 5% VDC GND Bus A Bus B


terminal P6 + - A B

pin 15 5% VDCC

GND Bus A Bus B


terminal P5 1 2 3

pin GND TX RX

description send receive


P5 for specialpurpose only!


4/12

CPA data sheet

NOXCPA

The NOXCPA is the operating panel for the NOX alarmsystem with 128 x 64 pixels LCD graphic display, white

back light, integrated alarm buzzer, a numeric key padwith clear C and enter E keys and two scroll keyswith variable function.

technical data:

Min. Nom. Max.


power consumption at 15 VDC mA 15 50



condensing)

% rel. h 93

dimensions (L x B x H): mmon wall 175 x 110 x 24

in wall 212 x 148 x 23

protection class IP30


terminal P2 + - A B

pin 9-15.5 VDC GND Bus A Bus B




5/12

MIO data sheet

NOXMIO

NOXMIO is an input and output modulewith eight relay outputs plus four

resistance monitored inputs with driver forconnected flash lights or sirens. Althoughflexible in the programming, the outputsare often used to interface to alarmtransmission devices.

technical data:

min. nom. max.

supply voltage (VBUS) VDC 9.0 15.0 15.5power consumption 15 VDC mA 15 83

operating temperature C 0 25 40

air humidity at +40C (noncondensing)

% rel. h 93

input impedance range 1-4 k 3.5 12 50

electrical data relay 1-4 each contact max. 30VDC/1A

fuses (F1 to F4) 500mA slow-bloworder no.: 154.500T

dimensions (L x B): mm 47.5 x 65


terminal P2 + - A Bpin 9-15.5 VDC GND Bus A Bus B


terminal P3 1 2 3 4 5 6

pin VBUS Input 1 O.C. (1) VBUS Input 2 O.C. (1)

description input 1 input 2

7 8 9 10 11 12

pin VBUS Input 3 O.C. (1) VBUS Input 4 O.C. (1)


terminal P4 1 2 3 4 5 6

pin NO (2) COM (3) NC (4) NO (2) COM (3) NC (4)

description relay 1 relay 2

7 8 9 10 11 12



terminal P5 1 2 3 4 5 6



7 8 9 10 11 12



O.C.: open collector, NO: normally open, COM: common, 4 NC: normally closed



6/12

IN4 data sheet

NOXIN4

NOXIN4 is a universal input module connectable to the NOXalarm bus with four resistance monitored inputs.

technical data:

min. nom. max.

supply voltage (VBUS) VDC 9.0 15.0 15.5power consumption 15 VDC mA 12 16



% rel. h 93

input impedance range 1-4 k 3.5 12 50




terminal P2 + - A B

pin 9-15.5 VDC GND Bus A Bus Bdescription supply voltage (VBUS) bus connection

terminal P3 1 2 3 4 5 6

pin VBUS Input 1 GND VBUS Input 2 GND


7 8 9 10 11 12

pin VBUS Input 3 GND VBUS Input 4 GND




7/12

RE4 data sheet

b) NOXRE4

The NOXRE4 offers four programmable relay outputs totransmit alarms or the status of detector groups to supervising

systems.

technical data:

Min. Nom. Max.supply voltage (VBUS) VDC 9.0 15.0 15.5




% rel. h 93

electrical data relay 1-4 each contact max. 30 VDC/1A






terminal P3 1 2 3 4 5 6



7 8 9 10 11 12



1 NO: normally open, 2 COM: common, 3 NC: normally closed



8/12

CRD data sheet

NOXCRD with Wiegand 26 Bit interface

The NOXCRD is a universal input/output module connected tothe NOX alarm bus with one resistance monitored input, one

relay output and a card reader port with Wiegand 26 Bitinterface.

technical data:

min. nom. max.

supply voltage (VBUS) VDC 9.0 15.0 15.5power consumption at 15 VDC mA 12 18


air humidity at +40C % rel. h 93

input impedance range (noncondensing)

k 3.5 12 50

electrical data relay max. 30VDC/1A






terminal P3 1 2 3 4 5 6

pin VBUS Input GND 5 VDC GND LED 1

description input card reader

7 8 9 10 11 12

pin LED 2 Data 0 Data 1 NO (1) COM (2) NC (3)

description card reader relay




9/12

RPT data sheet

NOXRPT

The NOXRPT is a universal module configurable as repeater(RS485) or as serial gateway (RS232) to connect a personal

computer to the NOX alarm bus.

technical data:

min. nom. max.

supply voltage (VBUS) VDC 9.0 15.0 15.5power consumption at 15 VDC mA 13 14



% rel. h 93

dimensions (L x B x H) mm 85 x 66 x 27



terminal P1 1 2 3 4

pin 5 VDC GND RX TX

description reserve serial interface (RS232)

terminal P2 + - A B

pin 9-15.5 VDC GND Bus 1 A Bus 1 B

description supply voltage 1 (VBUS1) bus 1 - input

terminal P3 + - A B

pin 9-15.5 VDC GND Bus 2 A Bus 2 B

description supply voltage 2 (VBUS2) bus 2 - output

jumper assignment:

JP1 1-2 2-3 JP2 ON OFF

function repeater serialinterface

function VBUS1=VBUS2

VBUS2external

output Bus 2output

RS232



10/12

THS data sheet

NOXTHS

The NOXTHS module connects an internal or externalcombined sensor for temperature and humidity to the NOxbus.

The module contains a freely programmable relay outputon the board.

This device is not approved by the SVV.

technical data:

min. nom. max.




air humidity at +40C % rel. h 93

electrical data relay max. 30VDC / 1A

dimensions (L x B x H) mm 85 x 66 x 27



terminal P2 + - A B

pin 9 - 15.5VDC GND Bus A Bus B


terminal P3 1 2 3 4 5 6

pinX X X Sensor

5VGND Data1

description X= not used Sensor

7 8 9 10 11 12

pin Data2 X X NO (1) COM (2) NC (3)

description Sensor X= do not use relay




11/12

technical data sensor (SHT71)

Tested for temperature range from:-25 to +75 C for the externalsensor

Tested for temperature range from:0 to +40 C for the internal sensor

Tested for humidity range from: 0to 100% RHfor both, the internal and theexternal sensor



12/12

M31 data sheet

NOXM31

NOXM31 is a compact module with one output and threeinputs for integration into the housing of a detector.

technical data:

min. nom. max.


power consumption 15 VDC mA 12 16



condensing)

% rel. h 93

electrical data open collector output max. 15 VDC/ 50 mA (to GND)



terminal P? A B

pin Bus A Bus B

description bus connection

wire red black yellow green 1

pin + - OUT IN 1

description supply voltage output inputwire green 2 green 3

pin IN 2 IN 3

description input

All three input are equipped with a 10k pull up resistor. The inputs are triggered bytying them down to GND.

attention: It is not allowed to lengthen the pre-connected wires!


Documents

NOX E Datasheets