Oskar Katalog Ic 2012 Web Icin Mini

İstanbul Kilit

2000 yılından itibaren “Oskar” markası altında endüstriyel hizmetlerde kullanıma yönelik kilit menteşe ve aksesuarlar imal etmektedir.

Hizmet ettiği elektrik pano, makine, metal, otomotiv, ve mobilya sektörüne sürekli yeni ürünler geliştiren şirketimiz, müşteriye özel ürünler de tasarlayıp imal etmektedir.

Şirketimiz kuruluşundan bu yana, en son teknolojik üretim tekniklerinden istifade ederek, yapmış olduğu yeni tasarımlarla birlikte ürün gamını geliştirerek sektörün ihtiyaçları doğrultusunda sürekli yenilikler gerçekleştirmektedir. Rosh standartlarına uygun üretim yapan şirketimiz TSEK, ISO 9001-2008 ve diğer uluslar arası kalite sertifikalarına sahiptir.

15 ülkede bayiliği bulunan ve dünyanın birçok ülkesinde satış ve dağıtım ağına sahip olan şirketimiz müşteri odaklı çözümler sunarak her zaman müşterilerinin ve iş ortaklarının yanındadır.

ÜRÜNLERİMİZ

• KOLLU PANO KİLİTLERİ• ÇEYREK DÖNÜŞLÜ YAYLI PANO KİLİTLERİ• MOBİLYA KİLİTLERİ• PANO MENTEŞELERİ• PANO AKSESUARLARI• CONTALAR• İZOLATÖRLER

“Hedef; asla vazgeçmemek en iyi olmak”

İspanyolet Kollu Pano Kilitleriİspanyolet Lama Çubuk ve Aksesuarları

Rod Latch System Swing HandlesEspagnolette Round, Flat Rods and Accessories

5-18

Bölüm 1 Part 1

Bölüm 2 Part 2

Bölüm 3 Part 3

Bölüm 4 Part 4

Bölüm 5 Part 5

Bölüm 6 Part 6

Bölüm 7 Part 7

19-36

37-58

59-74

75-106

107-126

127-133

136-137

Kollu Pano KilitleriKabin KilitleriSwing HandlesCabinet Locks

Yaylı Pano Kilitleri - AnahtarlarPlastik Pano Kilitleri

Quarter Turn Locks - KeysPlastic Panel Locks

Çekmece Kilitleri - Dosya Dolap Kilitleri Yangın Dolap Kilitleri

Cam Lock - Document Cabinet LockFire Cabinet Lock

MenteşelerHinges

Pano AksesuarlarıPano Kapak Contaları

Panel AccessoriesPanel Cover Gasgets

Mesnet İzalatörleriInsulators

SertifikalarımızCertificates

KROM KAPLAMA

CHROME PLATED

SİYAH BOYA

BLACK PAINTED

STATİK BOYA (RAL 7035)

STATIC PAINTED (RAL 7035)

ÇİNKO KAPLAMA

ZINC PLATED

NİKEL KAPLAMA

NICKEL PLATED

ELOKSAL KAPLAMA

ELOXAL PLATED

MAT KROM BOYALI

MAT CHROME PAINTED

GÖBEK-BAREL

INSERT-CYLINDERVerildiği sayfadaki

göbekleri işaret eder.

Indicate inserts at the

given pages.

ANAHTAR / KEYAnahtar göbeklerini işaret eder.

Indicate inserts of keys.

- İstanbul Kilit önceden haber vermeksizin ürünlerde değişiklik yapma hakkını saklı tutar.- Ürün resimleri ve çizimler ölçekli değildir.- Kaplamalar TS EN 12540 standartlarına uygundur.- İstanbul Kilit’in izni olmadan katalogdan herhangi bir görüntü kullanılamaz.

- Istanbul Kilit reserves the right to modify its products without prior notification.- The product images and drawings are not scaled.- Cotings conform to TS EN 12540 standard.- No image from this catalogue can be used without the prior permis-sion of İstanbul Kilit.

Bu katalogda kullanılan tüm çizimler, fotoğraflar ve yazılı bilgiler İSTANBUL KİLİT LTD. ŞTİ’ne aittir.İzinsiz olarak tamamen veya kısmen alıntı yapılamaz her hakkı saklıdır.

01.01.2012 Ürün Tanıtım Kataloğu

CP

BP

SP

ZP

NP

EP

MCP

C

K

KATALOG REHBERİ / CATALOGUE GUIDESiparişlerinizde aşağıda örnekleri verilen kodlama sistemi uygulanacaktır. Siparişlerinizi bu sisteme uygun bir şekilde verdiğiniz takdirde sizlere daha iyi hizmet sunacağız.

Below is given an example coding system to indentify the items correctly when placing an order. This will enable us to serve you better when you form your orders according to these system.

BÖLÜM 1 / PART 1 ÖRNEK / EXAMPLE




İspanyolet Kollu Pano Kilitleri

İspanyolet Lama Çubukve Aksesuarları

Rod Latch SystemSwing HandlesEspagnolette Round,Flat Rods and Accessories

www.oskarlocks.comwww.oskarkilit.com

Bölüm 1 Part 1

7www.oskarlocks.com6 www.oskarkilit.com

İSPANYOLET KOLLU PANO KİLİTLERİ

KOLLU PANO KİLİDİ / SWING HANDLE 003


MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30KOL : ZAMAK DIN-EN 1774 ZnAI4Cu1MEKANİZMA : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30DİL : ÇELİKLAMA : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30HANDLE : ZAMAK DIN-EN 1774 ZnAI4Cu1 MECHANISM : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30CAM : STEELFLAT ROD : STEELO’RING : RUBBER

ZAMAK & POLYAMIDE PA6 GFR 30

MONTAJ ÖLÇÜSÜFIXING


ROD LATCH SYSTEM

KOLLU PANO KİLİDİ / SWING HANDLE002

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1MEKANİZMA : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1MECHANISM : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30CAM : STEELO’RING : RUBBER

KOLLU PANO KİLİDİ (ASMA HAMİLLİ)SWING HANDLE (FOR PAD LOCK)002A





MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1MEKANİZMA : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30DİL : ÇELİKLAMA : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1MECHANISM : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30CAM : STEELFLAT ROD : STEELO’RING : RUBBER


ROD LATCH SYSTEM


MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1KOL : ZAMAK DIN-EN 1774 ZnAI4Cu1MEKANİZMA : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30YÜZEY : MAT KROM BOYADİL : ÇELİKLAMA : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1HANDLE : ZAMAK DIN-EN 1774 ZnAI4Cu1 MECHANISM : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30FINISH : MAT CHROME PAINTEDCAM : STEELFLAT ROD : STEELO’RING : RUBBER

Farklı Boya Seçeneklerini Belirtiniz. Pleace Specify The Colour That You Want


ALL IN METAL



KOLLU PANO KİLİDİ (ASMA KİLİTLİ)SWING HANDLE (FOR PAD LOCK) 007A

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1MEKANİZMA : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30

YÜZEY : MAT KROM BOYAASMA HAMİL : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKLAMA : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1MECHANISM : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30

FINISH : MAT CHORE PAINTEDPAD LOCK : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELFLAT ROD : STEELO’RING : RUBBER



ROD LATCH SYSTEM

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1MEKANİZMA : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30

YÜZEY : MAT KROM BOYA veya SİYAH BOYAASMA HAMİL : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKLAMA : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1MECHANISM : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30

FINISH : MAT CHORE PAINTED or STATIC BLACK PAINTEDPAD LOCK : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELFLAT ROD : STEELO’RING : RUBBER

KOLLU PANO KİLİDİ (ASMA KİLİTLİ)SWING HANDLE (FOR PAD LOCK)007B





008-1

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30KOL : POLYAMIDE PA6 GFR 30SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1MEKANİZMA : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30DİL : ÇELİKLAMA : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30HANDLE : POLYAMIDE PA6 GFR 30CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1MECHANISM : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30CAM : STEELFLAT ROD : STEELO’RING : RUBBER

KOL : ZAMAK DIN-EN 1774 ZnAI4Cu1HANDLE : ZAMAK DIN-EN 1774 ZnAI4Cu1YUZEY : SİYAH BOYALIFINISH : BLACK PAINTED


ROD LATCH SYSTEM


009-1

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30KOL : POLYAMIDE PA6 GFR 30SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1MEKANİZMA : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30DİL : ÇELİKLAMA : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30HANDLE : POLYAMIDE PA6 GFR 30CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1MECHANISM : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30CAM : STEELFLAT ROD : STEELO’RING : RUBBER

KOL : ZAMAK DIN-EN 1774 ZnAI4Cu1YUZEY : SİYAH BOYALI

HANDLE : ZAMAK DIN-EN 1774 ZnAI4Cu1FINISH : BLACK PAINTED




KOLLU PANO KİLİDİ / SWING HANDLE 010A




ROD LATCH SYSTEM




KOLLU PANO KİLİDİ (ASMA KİLİT)SWING HANDLE (FOR PAD LOCK)208A

POLYAMIDEPA6 GFR 30

208DB



MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1MEKANİZMA : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30DİL : ÇELİKLAMA : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1MECHANISM : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30CAM : STEELFLAT ROD : STEELO’RING : RUBBER

İSPANYOLET PANO KİLİDİESPAGNOLETTE PANEL LOCK 210


ROD LATCH SYSTEM

MALZEMEÇUBUK : Ø 8 mm ÇELİKMAKARA : POLYAMIDE PA6 GFR 30PİM : ÇELİKYÜZEY : ÇİNKO KAPLAMA

MATERIALRAUND ROD : Ø 8 mm STEELROLLER : POLYAMIDE PA6 GFR 30PIN : STEELFINISH : ZINC PLATED

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30SOMUN : ÇELİK (M6)

MATERIALBODY : POLYAMIDE PA6 GFR 30NUT : STEEL (M6)

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1YÜZEY : ÇİNKO KAPLAMA

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1FINISH : ZINC PLATED

T1 ISPANYOLET ÇUBUKT1 ESPAGNOLETTE ROD207-1

PLASTİK ÇUBUK YATAĞIROUND ROD GUIDE207A

ÇUBUK TUTUCUROD HOLDER207RB

207

L

400 mm

500 mm

600 mm

700 mm

800 mm

900 mm

1000 mm

1200 mm

L

L

18 www.oskarkilit.com

İSPANYOLET ÇUBUK VE AKSESUARLARI

MALZEMEÇUBUK : ÇELİK LAMAMAKARA : POLYAMIDE PA6 GFR 30PİM : ÇELİKYÜZEY : ÇİNKO KAPLAMA

MATERIALFLAT ROD : STEELROLLER : POLYAMIDE PA6 GFR 30PIN : STEELFINISH : ZINC PLATED

T2 ISPANYOLET ÇUBUKT2 ESPAGNOLETTE ROD 209-22

209-24

ÇOK KİLİTLEMELİ İSPANYOLET ÇUBUKMULTIPLE LOCKING FLAT ROD 209ÇKS

LAMA KİLİTLEME YATAĞIDUAL ROLLER CATCHER 209LKY

LAMA YATAĞIFLAT ROD GUIDE 209A

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30SOMUN : ÇELİK (M6)

MATERIALBODY : POLYAMIDE PA6 GFR 30NUT : STEEL (M6)

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30YÜZEY : ÇİNKO KAPLAMA

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30FINISH : ZINC PLATED


Kollu Pano KilitleriKabin Kilitleri

Swing HandlesCabinet Locks


Bölüm 2 Part 2


KOLLU PANO KİLİTLERİ

KOLLU PANO KİLİDİ / SWING HANDLE 001-2

KOLLU PANO KİLİDİ / SWING HANDLE 001-2-1

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30KOL : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30HANDLE : ZAMAK DIN-EN 1774 ZnAI4Cu1 CAM : STEELO’RING : RUBBER


SWING HANDLES

KOLLU PANO KİLİDİ / SWING HANDLE002-2

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELO’RING : RUBBER

KOLLU PANO KİLİDİ (ASMA HAMİLLİ)SWING HANDLE (FOR PAD LOCK)002A-2




MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİK

MATERIALBODY : POLYAMIDE PA6 GFR 30CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEEL

KOLLU PANO KİLİDİ (ASMA HAMİLLİ)SWING HANDLE (FOR PAD LOCK) 004A


SWING HANDLES


PANO KİLİDİ (DB) / SWING HANDLE (DB)006



Göbekler 006 kodlu ürün içindir. / For insert 006 code.

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELO’RING : RUBBER




MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELO’RING : RUBBER

KOLLU PANO KİLİDİ (ASMA KİLİTLİSWING HANDLE (FOR PAD LOCK) 007-1B


SWING HANDLES

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30KOL : POLYAMIDE PA6 GFR 30SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30HANDLE : POLYAMIDE PA6 GFR 30CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELO’RING : RUBBER



KOL : ZAMAK DIN-EN 1774 ZnAI4Cu1YUZEY : SİYAH BOYALI

HANDLE : ZAMAK DIN-EN 1774 ZnAI4Cu1FINISH : BLACK PAINTED





MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30KOL : POLYAMIDE PA6 GFR 30 veya : ZAMAK DIN-EN 1774 ZnAI4Cu1SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30HANDLE : POLYAMIDE PA6 GFR 30 or : ZAMAK DIN-EN 1774 ZnAI4Cu1CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELO’RING : RUBBER

KOL : ZAMAK DIN-EN 1774 ZnAI4Cu1HANDLE : ZAMAK DIN-EN 1774 ZnAI4Cu1YUZEY : SİYAH BOYALIFINISH : BLACK PAINTED

180

35,511,5

h

L

35,5

18


SWING HANDLES

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30KOL : POLYAMIDE PA6 GFR 30SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1ASMA HAMİL : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30HANDLE : POLYAMIDE PA6 GFR 30CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1PAD LOCK : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELO’RING : RUBBER


KOLLU PANO KİLİDİ (ASMA HAMİLLİ)SWING HANDLE (FOR PAD LOCK)011

KOLLU PANO KİLİDİ (ASMA HAMİLLİ)SWING HANDLE (FOR PAD LOCK)010-1A

011 İçin Farklı Boya Seçeneklerini Belirtiniz. For 011 Pleace Specify The Colour That You Want

Ø12

L

h

130

35,5

25

Ø6,5

49

MO

NTA

J ÖLÇ

ÜS

ÜFIX

ING

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1KOL : ZAMAK DIN-EN 1774 ZnAI4Cu1ASMA HAMİL : ZAMAK DIN-EN 1774 ZnAI4Cu1YÜZEY : SİYAH BOYALIDİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1HANDLE : ZAMAK DIN-EN 1774 ZnAI4Cu1PAD LOCK : ZAMAK DIN-EN 1774 ZnAI4Cu1FINISH : STATIC BLACK PAINTEDCAM : STEELO’RING : RUBBER

ALL IN METAL






KOLLU PANO KİLİDİ (ASMA KİLİTLİ)SWING HANDLE (FOR PAD LOCK) 206A

206DB


SWING HANDLES

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30SİLİNDİR : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30CYLINDER : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELO’RING : RUBBER

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELO’RING : RUBBER


T3 PANO KİLİDİ / T3 PANEL LOCK210-1



MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1YÜZEY : KROM KAPLAMA-SİYAH BOYALIANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1FINISH : CHROME PLATED-BLACK PAINTEDKEY ROTATION ANGLE: 90°

T KOLLU PANO KİLİDİ / T HANDLE 246

L KOLLU PANO KİLİDİ / L HANDLE 247



FUNCTIONAL LOCK

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30DİL : ÇELİKO’RİNG : KAUÇUK

MATERIALBODY : POLYAMIDE PA6 GFR 30CAM : STEELO’RING : RUBBER

FONKSİYONEL KİLİT / FUNCTIONAL LOCK020

FONKSİYONEL KİLİT (OTOMATİK)FUNCTIONAL LOCK (AUTOMATIC)021


FONKSİYONEL KİLİT

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30DİL : ÇELİK veya : POLYAMIDE PA6 GFR 30

MATERIALBODY : POLYAMIDE PA6 GFR 30CAM : STEEL or : POLYAMIDE PA6 GFR 30

FONKSİYONEL KİLİT / FUNCTIONAL LOCK 030-M1

FONKSİYONEL KİLİT / FUNCTIONAL LOCK 030-M2




CABINET LOCK

MALZEMEGÖVDE : ÇELİKKOL : ÇELİKDİL : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : KAUÇUKYÜZEY : SİYAH BOYALI

MATERIALBODY : STEELHANDLE : STEELCAM : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : RUBBERFINISH : BLACK PAINTED

KABİN KİLİDİ /CABINET LOCK252


KABİN KİLİTLERİ

MALZEMEGÖVDE : PASLANMAZ ÇELİKKOL : PASLANMAZ ÇELİKDİL : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : KAUÇUK

MATERIALBODY : STAINLESS STEELHANDLE : STAINLESS STEELCAM : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : RUBBER

KABİN KİLİDİ (PASLANMAZ)CABINET LOCK (STAINLESS STEEL) 253

STAINLESS STEEL


CABINET LOCK

MALZEMEGÖVDE : ÇELİKKOL : ÇELİKDİL : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : KAUÇUKASMA HAMİL : ÇELİKYÜZEY : SİYAH BOYALI

MATERIALBODY : STEELHANDLE : STEELCAM : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : RUBBERPAD LOCK : STEELFINISH : BLACK PAINTED

KABİN KİLİDİ (ASMA HAMİLLİ)CABINET LOCK (FOR PADLOCK)254

Yaylı Pano KilitleriAnahtarlar

Plastik Pano Kilitleri

Quarter Turn With SpringKeysPlastic Panel Locks


Bölüm 3 Part 3


YAYLI PANO KİLİTLERİ

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKYÜZEY : KROM KAPLAMA VEYA SİYAH BOYALIANAHTAR DÖNME AÇISI : 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERFINISH : CHROME PLATED OR BLACK PAINTEDKEY ROTATION ANGLE: 90°

KİLİT TUTAMAĞI / HANDLE FOR LOCK 214

YAYLI PANO KİLİDİ (DB)QUARTER TURN WİTH SPRING (DB) 201

YAYLI PANO KİLİDİ (STATİK BOYALI - DB)QUARTER TURN WİTH SPRING (STATIC PAINTED - DB) 201SB

YAYLI PANO KİLİDİ (ISP)QUARTER TURN WITH SPRING (ESP) 202

IP 65 (OPS)

IP 65 - İSTEDİĞİNİZDELÜTFEN BELİRTİNİZ

IP 65 - OPTIONAL



QUARTER TURN WITH SPRING

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKANAHTAR DÖNME AÇISI : 90°

MATERIALBODY : POLYAMIDE PA6 GFR 30INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERKEY ROTATION ANGLE: 90°

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30GÖBEK : POLYAMIDE PA6 GFR 30DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : POLYAMIDE PA6 GFR 30INSERT : POLYAMIDE PA6 GFR 30CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERKEY ROTATION ANGLE: 90°

IP 65 - İSTEDİĞİNİZDELÜTFEN BELİRTİNİZIP 65 - OPTIONAL

PLS YAYLI PANO KİLİDİ (ZAMAK DB GÖB.)QUARTER TURN WİTH SPRING (ZAMAK INSERT-DB)201P

PLS YAYLI PANO KİLİDİ (PLS GÖBEKLİ-DB)QUARTER TURN WITH SPRING (PLS INSERT-DB)201PG




MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKYÜZEY : KROM KAPLAMA VEYA SİYAH BOYALIANAHTAR DÖNME AÇISI : 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERFINISH : CHROME PLATED OR BLACK PAINTEDKEY ROTATION ANGLE: 90°



STATİK BOYALI (ÜÇGEN) / (STATIC PAINTED TRIANGLE) 201A-1

PLS YAYLI PANO KİLİDİ (ZAMAK ÜÇGEN GÖBEKLİ)QUARTER TURN WITH SPRING (ZAMAK TRIANGLE INSERT) 201PU

YAYLI PANO KİLİDİ (ÜÇGEN)QUARTER TURN WITH SPRING (TRIANGLE) 201A

IP 65 - İSTEDİĞİNİZDELÜTFEN BELİRTİNİZ

IP 65 - OPTIONAL




MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKYÜZEY : KROM KAPLAMA-SİYAH BOYALIANAHTAR DÖNME AÇISI : 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERFINISH : CHROME PLATED-BLACK PAINTEDKEY ROTATION ANGLE: 90°



MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1

YAYLI PANO KİLİDİ (ZAMAK KARE GÖBEKLİ)QUARTER TURN WITH SPRING (ZAMAK SQUARE INSERT)201B

IP 65 - İSTEDİĞİNİZDELÜTFEN BELİRTİNİZIP 65 - OPTIONAL

AnahtarKey

GöbekInsert

YaySpring

KovanBody

ContaGasket

VidaScrew

SomunNut

DilCam

STATİK BOYALI (SİYAH)STATIC PAINTED (BLACK)201B-1

YAYLI PANO KİLİDİ (ZAMAK ALLEN GÖBEKLİ)QUARTER TURN WITH SPRING (ZAMAK ALLEN INSERT)201C

PLS YAYLI PANO KİLİDİ (ZAMAK KARE GÖBEKLİ)QUARTER TURN WITH SPRING (ZAMAK SQUARE INSERT)201PK



6 MM



MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKYÜZEY : KROM KAPLAMA-SİYAH BOYALIANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERFINISH : CHROME PLATED-BLACK PAINTEDKEY ROTATION ANGLE: 90°

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : POLYAMIDE PA6 GFR 30CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERKEY ROTATION ANGLE: 90°

STATİK BOYALI (SİYAH) / STATIC PAINTED (BLACK) 204SB

YAYLI PANO KİLİDİ (PLS KELEBEK)QUARTER TURN WITH WING KNOB (PLS BUTTERFLY KEY) 205

YAYLI PANO KİLİDİ (METAL KELEBEK)QUARTER TURN WITH WING KNOB (BUTTERFLY KEY) 204





MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKYÜZEY : KROM KAPLAMAANAHTAR DÖNME AÇISI: 90°-180°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERFINISH : CHROME PLATEDKEY ROTATION ANGLE: 90°-180°

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKANAHTAR DÖNME AÇISI: 90°-180°

MATERIALBODY : POLYAMIDE PA6 GFR 30CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERKEY ROTATION ANGLE: 90°-180°

SİLİNDİRLİ YAYLI PANO KİLİDİCAM LOCK242

244

SİLİNDİRLİ YAYLI PANO KİLİDİCAM LOCK243



Stainless SteelDust Cap






MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1YÜZEY : KROM KAPLAMAANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1FINISH : CHROME PLATEDKEY ROTATION ANGLE: 90°

SİLİNDİRLİ YAYLI PANO KİLİDİCAM LOCK WITH WING KNOB 232-1

BİLYALI PANO KİLİDİ (KELEBEK ANAHTARLI)PADLOCKABLE WING KNOB 245

232

SAĞ VEYA SOL TALEPLERİNİZİ BELİRTİNİZPLEASE SPECIFY RIGHT AND LEFT APPLICATION

SİYAH BOYALIBLACK PAINTED

KROM KAPLAMACHROME PLATED

SAĞ-SOLRIGHT-LEFT

ASMA HAMİLLİWITH HANGING






MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKYÜZEY : KROM KAPLAMAANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERFINISH : CHROME PLATEDKEY ROTATION ANGLE: 90°

30mm

35mm

40mm

233-35

233-40

YAYLI PANO KİLİDİQUARTER TURN WITH SPRING233-30

h 30 35 40




MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKYÜZEY : KROM KAPLAMAANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERFINISH : CHROME PLATEDKEY ROTATION ANGLE: 90°

YAYLI PANO KİLİDİQUARTER TURN WITH SPRING 233-50

YAYLI PANO KİLİDİQUARTER TURN WITH SPRING 233-60

50mm

60mm

h 50 60




SİYAHBLACK

RAL 7032

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30GÖBEK : POLYAMIDE PA6 GFR 30veya : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : POLYAMIDE PA6 GFR 30SOMUN : POLYAMIDE PA6 GFR 30 CONTA : PVC VEYA KAUÇUKANAHTAR : POLYAMIDE PA6 GFR 30ANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : POLYAMIDE PA6 GFR 30INSERT : POLYAMIDE PA6 GFR 30or : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : POLYAMIDE PA6 GFR 30NUT : POLYAMIDE PA6 GFR 30GASKET : PVC OR RUBBERKEY : POLYAMIDE PA6 GFR 30KEY ROTATION ANGLE: 90°

GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1 INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1231-3

231

YAYLI PANO KİLİDİ (DÖRTGEN)QUADRANGLE QUARTER TURN WITH SPRING231-2

YAYLI PANO KİLİDİ (DÖRTGEN)QUADRANGLE QUARTER TURN WITH SPRING231-1

SİYAHBLACK

RAL 7032




MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1 ANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : POLYAMIDE PA6 GFR 30INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1KEY ROTATION ANGLE: 90°

MALZEMEPOLYAMIDE PA6 GFR 30SAC KALINLIĞI: 1.20 - 1.50 mm

MATERIALPOLYAMIDE PA6 GFR 30THICKNESS: 1.20 - 1.50 mm

DÖRTGEN YAYLI PANO KİLİDİQUADRANGLE QUARTER TURN WITH SPRING 250

SÜRGÜ KİLİTSILIDING LOCK 230

MİNİ SÜRGÜ KİLİTMINI SILIDING LOCK 230-1

Bu Ürün 250 kodlu ürün içindir.




236 KROM KAPLAMACHROME PLATED

STATİK BOYALI (SİYAH)STATIC PAINTED (BLACK)

PLASTİKPLASTIC

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ÇELİKYÜZEY : KROM KAPLAMA- SİYAH BOYALIANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : STEELFINISH : CHROME PLATED-BLACK PAINTEDKEY ROTATION ANGLE: 90°

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30DİL : ÇELİKSOMUN : ÇELİKCONTA : PVC VEYA KAUÇUKANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : POLYAMIDE PA6 GFR 30CAM : STEELNUT : STEELGASKET : PVC OR RUBBERKEY ROTATION ANGLE: 90°

MİNİ YAYLI PANO KİLİDİMINI CAM LOCK WITH WING KNOB236-1

MİNİ YAYLI PANO KİLİDİMINI CAM LOCK WITH WING KNOB241



MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ÇELİKYÜZEY : KROM KAPLAMA-SIYAH BOYALIANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : STEELFINISH : CHROME PLATED-BLACK PAINTEDKEY ROTATION ANGLE: 90°

MİNİ YAYLI PANO KİLİDİ (DB)MINI CAM LOCK WITH WING KNOB (DB) 237-1

237

238-1

MİNİ YAYLI PANO KİLİDİ (ÜÇGEN)MINI CAM LOCK WITH WING KNOB (TRIANGLE) 238







MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1GÖBEK : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ÇELİKYÜZEY : KROM KAPLAMA-SIYAH BOYALIANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1INSERT : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : STEELFINISH : CHROME PLATED-BLACK PAINTEDKEY ROTATION ANGLE: 90°

239

240-1

MİNİ YAYLI PANO KİLİDİ (KARE)MINI CAM LOCK WITH WING KNOB (SQUARE)239-1

MİNİ YAYLI PANO KİLİDİ (TORNAVİDA BAŞLI)MINI CAM LOCK WITH WING KNOB (SCREWDRIVER KEY)240







255



MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1CONTA : PVC VEYA KAUÇUKANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : POLYAMIDE PA6 GFR 30CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1GASKET : PVC OR RUBBERKEY ROTATION ANGLE: 90°

YAYLI PANO KİLİDİ (METAL KELEBEK)QUARTER TURN WITH WING KNOB (BUTTERFLY KEY) 255-1

YAYLI PANO KİLİDİ (PLS KELEBEK)QUARTER TURN WITH WING KNOB (BUTTERFLY KEY) 256-1

ZAMAK

POLYAMIDE

POLYAMIDE

ZAMAK

256




KEYS

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1YÜZEY : KROM KAPLAMA-SIYAH BOYALI

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1FINISH : CHROME PLATED-BLACK PAINTED

203-1-2

203-2

203-1-1

YAYLI PANO KİLİT ANAHTARLARIPANEL LOCK KEYS203-1


ANAHTARLAR



203-2-2

203-2-3

203-2-4

YAYLI PANO KİLİT ANAHTARLARIPANEL LOCK KEYS 203-2-1


KEYS

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30

MATERIALBODY : POLYAMIDE PA6 GFR 30



203-5

203-3

YAYLI PANO KİLİT ANAHTARLARIPANEL LOCK KEYS203-4


PLASTİK PANO KİLİTLERİ

ALLEN PANO KİLİDİALLEN PANEL LOCK 221

KALDIR ÇEVİR PANO KİLİDİLIFT and TURN PANEL LOCK 222

MİNİ PLASTİK KİLİTMINI PLASTIC LOCK 728

MALZEMEGÖVDE : ÇELİKPLS KAPAK : POLYAMIDEDİL : ÇELİK

MATERIALBODY : STEELPLS COVER : POLYAMIDECAM : STEEL 6 mm

MALZEMEGÖVDE : POLYAMIDEDİL : ÇELİK

MATERIALBODY : POLYAMIDECAM : STEEL

MALZEMEGÖVDE : POLYAMIDEDİL : ÇELİK

MATERIALBODY : POLYAMIDECAM : STEEL

221A


PLASTIC PANEL LOCK

MALZEMEGÖVDE : ÇELİKANAHTAR : ZAMAK DIN-EN 1774 ZnAI4Cu1YÜZEY : ÇİNKO KAPLAMA

MATERIALBODY : STEELKEY : ZAMAK DIN-EN 1774 ZnAI4Cu1FINISH : ZINC PLATED

MALZEMEGÖVDE : POLYAMIDE

MATERIALBODY : POLYAMIDE

PLASTIK PANO MANDALIPLASTIC PANEL LATCH224

KAPAZLAMA KİLİTIRON LOCK211


OTOMATİK PANO KİLİDİ / KAPUT MANDALLARIAUTOMATIC PANEL LOCK / COVER LOCK

OTOMATİK PANO KİLİDİAUTOMATIC PANEL LOCK 212

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKYÜZEY : KROM KAPLAMA

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELFINISH : CHROME PLATED

KAPUT KİLİDİ (KÜÇÜK)COVER LOCK (SMALL) 721-1

KAPUT KİLİDİ (BÜYÜK)COVER LOCK (BIG) 721

MALZEMEGÖVDE : ÇELİKYÜZEY : ÇİNKO KAPLAMA

MATERIALBODY : STEELFINISH : ZINC PLATED


Çekmece KilitleriDosya Dolap KilitleriYangın Dolap Kilitleri

Cam LockDocument Cabinet LockFire Cabinet Lock


Bölüm 4 Part 4


ÇEKMECE KİLİTLERİ

MANDALLI KİLİT (ŞİFRELİ ve SEGMANLI)CAM LOCK (WITH CIPHER and SEGMENT) 101

MANDALLI KİLİT EĞRİ DİLLİ (ŞİFRELİ ve SEGMANLI)CAM LOCK (WHIT CIPHER and SEGMENT) 104

KİLİT TUTAMAĞIHANDLE FOR LOCK 214A



MANDALLI KİLİT (PLASTİK)CAM LOCK (PLASTIC) 223

MALZEMEGÖVDE : POLYAMIDE P6 GFR30DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1ANAHTAR DÖNME AÇISI: 180°

MATERIALBODY : POLYAMIDE P6 GFR30CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1KEY ROTATION ANGLE: 180°


CAM LOCKS



MANDALLI KİLİT (ŞİFRELİ ve SEGMANLI)CAM LOCK (WITH CIPHER and SEGMENT)101-2

MANDALLI KİLİT (ŞİFRELİ) CAM LOCK (WITH CIPHER)101-3



MANDALLI KİLİT (PASLANMAZ TOZ KAPAKLI)CAM LOCK (STAINLESS STEEL DUST CAP) 101-4

MİNİ MANDALLI KİLİTMINI CAM LOCK 114



MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1 veya : POLYAMIDE PA6 GFR 30DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1K. SOMUN : PİRİNÇ DIN-EN 17660 CuZn39Pb3 YÜZEY : KROM KAPLAMAANAHTAR DÖNME AÇISI: 180°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1 or : POLYAMIDE PA6 GFR 30CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1SMALL NUT : BRASS DIN-EN 17660 CuZn39Pb3FINISH : CHROME PLATEDKEY ROTATION ANGLE: 180°



CAM LOCKS

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSOMUN : ZAMAK DIN-EN 1774 ZnAI4Cu1ASMA HA. : ÇELİKYÜZEY : KROM KAPLAMAANAHTAR DÖNME AÇISI: 180°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELNUT : ZAMAK DIN-EN 1774 ZnAI4Cu1HANGING : STEELFINISH : CHROME PLATEDKEY ROTATION ANGLE: 180°



MANDALLI KİLİT (ASMA HAMİLLİ)CAM LOCK (FOR PADLOCK)103E

MANDALLI KİLİT (KELEBEK)PADLOCKABLE WING KNOB108

MANDALLI KİLİT (KELEBEK-TIRNAKLI KOVAN)PADLOCKABLE WING KNOB108-1

103

ASMA HAMİLLİFOR PADLOCK

SAĞ VEYA SOL TALEPLERİNİZİ BELİRTİNİZ.PLEASE SPECIFY RIGHT and LEFT APPLICATION.

108-1 Kodlu Ürün İçinFor108-1



MANDALLI KİLİT (İSP)CAM LOCK (ESP CIPHER SEGMENT) 112

TORNAVİDA BAŞLISCREWDRIVER KEY 113

BİLYALI PANO KİLİDİCAM LOCK WITH BALL (TRIANGLE) 216




CAM LOCKS



T ÇELİK DOLAP KOLLU KİLİTCAM LOCK T HANDLE105

L ÇELİK DOLAP KOLLU KİLİTCAM LOCK L HANDLE105-1



KISA MANDALLI KİLİTSHORT LOCK WITH LATCH 120

UZUN ÜNİVERSAL KİLİTLONG UNIVERSAL LOCK 124

UZUN MANDALLI KİLİTLONG LOCK WITH LATCH 121

KISA ÜNİVERSAL KİLİTSHORT UNIVERSAL LOCK 123

MALZEMEGÖVDE : PİRİNÇ DIN-EN 17660 CuZn39Pb3DİL : ÇELİKSOMUN : PİRİNÇ DIN-EN 17660 CuZn39Pb3YÜZEY : KROM KAPLAMAANAHTAR DÖNME AÇISI: 90°

MATERIALBODY : BRASS DIN-EN 17660 CuZn39Pb3CAM : STEELNUT : BRASS DIN-EN 17660 CuZn39Pb3FINISH : CHROME PLATEDKEY ROTATION ANGLE: 90°


CAM LOCKS

MALZEMEGÖVDE : PİRİNÇ DIN-EN 17660 CuZn39Pb3YÜZEY : KROM KAPLAMA

MATERIALBODY : BRASS DIN-EN 17660 CuZn39Pb3FINISH : CHROME PLATED

MALZEMEGÖVDE : PİRİNÇ DIN-EN 17660 CuZn39Pb3SOMUN : PİRİNÇ DIN-EN 17660 CuZn39Pb3YÜZEY : KROM KAPLAMA

MATERIALBODY : BRASS DIN-EN 17660 CuZn39Pb3NUT : BRASS DIN-EN 17660 CuZn39Pb3FINISH : CHROME PLATED

MALZEMEGÖVDE : PİRİNÇ DIN-EN 17660 CuZn39Pb3SOMUN : PİRİNÇ DIN-EN 17660 CuZn39Pb3YÜZEY : KROM KAPLAMAGÖBEK : ALLEN

MATERIALBODY : BRASS DIN-EN 17660 CuZn39Pb3NUT : BRASS DIN-EN 17660 CuZn39Pb3FINISH : CHROME PLATEDDRIVER : ALLEN

KARTOTEKS KİLİTCARD INDEX LOCK125

ALLEN GÖBEKLİ MANDALLI KILITPANEL LOCK WITH ALLEN SHAFT127

ETEJER KİLİDİETEJER LOCK126


DOSYA DOLAP KİLİTLERİ

DOSYA DOLAP KİLİDİDOCUMENT CABINET LOCK 106

DOSYA DOLAP KİLİDİDOCUMENT CABINET LOCK 106-3

KESON KİLİDİDOCUMENT CABINET LOCK 128

MALZEMEPLS GÖVDE : POLYAMIDE PA6 GÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKYÜZEY : KROM KAPLAMA-STATİK BOYALIANAHTAR DÖNME AÇISI: 90°

MATERIALPLS BODY : POLYAMIDE PA6BODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELFINISH : CHROME PLATED-STATIC PAINTEDKEY ROTATION ANGLE: 90°

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKSEKMAN : CK 45YÜZEY : KROM KAPLAMAANAHTAR DÖNME AÇISI: 180°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELWAVE WASHER : CK 45FINISH : CHROME PLATEDKEY ROTATION ANGLE: 180°




DOCUMENT CABINET LOCKS

MALZEMEPLS GÖVDE : POLYAMIDE PA6 KOL : ZAMAK DIN-EN 1774 ZnAI4Cu1DİL : ÇELİKYÜZEY : KROM KAPLAMAANAHTAR DÖNME AÇISI: 90°

MATERIALPLS BODY : POLYAMIDE PA6HANDLE : ZAMAK DIN-EN 1774 ZnAI4Cu1CAM : STEELFINISH : CHROME PLATEDKEY ROTATION ANGLE: 90°

DOLAP KİLİDİCABINET LOCK115

DOSYA DOLAP KİLİDİDOCUMENT CABINET LOCK106-5-1





YANGIN DOLAP KİLİTLERİFIRE CABINET LOCK

YANGIN DOLAP KİLİDİFIRE CABINET LOCK 106-4

YANGIN DOLAP KİLİDİFIRE CABINET LOCK 106-5




FURNITURE LOCK





ÇEKMECE KİLİDİ (KARE)FURNITURE LOCK (SQUARE)130

ÇEKMECE KİLİDİ (KARE)FURNITURE LOCK (SQUARE)138

KİLİT KARŞILIĞICAM HOLDER111

ÇEKMECE KİLİDİ (OVAL)FURNITURE LOCK (ROUND)133


CAM KİLİTLERİGLASS LOCK

CAM KİLİDİ (TEK KANATLI)GLASS LOCK (ONE SIDE) 135

CAM KİLİDİ (ÇİFT KANAT)GLASS LOCK (DOUBLE SIDE) 136

CAM KİLİDİ (SÜRGÜLÜ)GLASS LOCK (SLIDING) 137




FURNITURE LOCK

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1ÇUBUK : ALÜMİNYUMYÜZEY : KROM KAPLAMA

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1ROD : ALUMINIUMFINISH : CHROME PLATED

MERKEZİ KİLİT (YANDAN 60 cm)CENTRAL LOCK (TOP MOUNT SIDE 60 cm)140

MERKEZİ KİLİT (ÖNDEN 50 cm)CENTRAL LOCK (MOUNT SYSTEM 50 cm)139

Menteşeler Hinges


Bölüm 5 Part 5


MENTEŞELER

8 MM KÜP MENTEŞE8 MM PANEL HINGE 301

12 MM 303K

MALZEMEGÖVDE : PİRİNÇDÖNME AÇISI: 1800

MATERIALBODY : BRASSROTATION ANGLE: 1800



NİKEL KAPLAMANICKEL PLATED

M6 SOMUNM6 NUT

10 MM 302

M6 SOMUNM6 NUT

M8 SOMUNM8 NUT

M8 SOMUNM8 NUT

12 MM 303

10 MM 302K

M6 SOMUNM6 NUT

NİKEL KAPLAMANICKEL PLATED

77www.oskarlocks.com

HINGES

M6 SOMUNM6 NUT

12 MM BAĞLANTILI KÜP MENTEŞE12 MM PANEL HINGE306

16 MM307K

12 MM306K

16 MM307

MALZEMEGÖVDE : PİRİNÇDÖNME AÇISI: 900 - 1800

MATERIALBODY : BRASSROTATION ANGLE: 900 - 1800

MALZEMEGÖVDE : PİRİNÇYÜZEY : NİKEL KAPLAMADÖNME AÇISI: 900 - 1800

MATERIALBODY : BRASSFINISH : NICKEL PLATEDROTATION ANGLE: 900 - 1800

M6 SOMUNM6 NUT

M8 SOMUNM8 NUT

M8 SOMUNM8 NUT


MENTEŞELER

12 MM KÜP MENTEŞE12 MM PANEL HINGE 332

PROFİL MENTEŞEPROFILE HINGE 341


MALZEMEGÖVDE : PİRİNÇSOMUN : M8 İNBUSYÜZEY : KROM KAPLAMADÖNME AÇISI: 1800

MATERIALBODY : BRASSNUT : M8 INBUSFINISH : CHROME PLATEDROTATION ANGLE: 1800

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1DÖNME AÇISI: 1800

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1ROTATION ANGLE: 1800





HINGES

GİZLİ PANO MENTEŞESİCONCEALED PANEL HINGE308

308-1-2

308-1

MALZEMEGÖVDE : ÇELİKYÜZEY : ÇİNKO KAPLAMADÖNME AÇISI : 1100

MATERIALBODY : STEELFINISH : ZINC PLATEDROTATION ANGLE : 1100

MALZEMEGÖVDE : ÇELİKARA PARÇA : ALÜMİNYUMYÜZEY : ÇİNKO KAPLAMADÖNME AÇISI : 1100

MATERIALBODY : STEELWELDING PART :ALUMINIUMFINISH : ZINC PLATEDROTATION ANGLE : 1100

M5x6 YSB VİDA / SCREW


MENTEŞELER

GİZLİ PANO MENTEŞESİCONCEALED PANEL HINGE 308-2

GİZLİ PANO MENTEŞESİCONCEALED PANEL HINGE 308-3

MALZEMEGÖVDE : PASLANMAZ ÇELİKARA PARÇA : PASLANMAZ ÇELİKDÖNME AÇISI : 1100

MATERIALBODY : STAINLESS STEELWELDING PART : STAINLESS STEELROTATION ANGLE : 1100



M5x10 PERÇİN VİDA / SCREW

308-2-1

STAINLESS STEEL


HINGES



GİZLİ PANO MENTEŞESİCONCEALED PANEL HINGE309A



MALZEMEGÖVDE : ALÜMİNYUMARA PARÇA : ÇELİK, BAKIR KAPLAMAYÜZEY : ELOKSAL KAPLAMADÖNME AÇISI : 1100

MATERIALBODY : ALUMINIUMWELDING PART : STEEL, COPPER PLATEDFINISH : ELOXAL PLATEDROTATION ANGLE : 1100

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1ARA PARÇA : ÇELİK, BAKIR KAPLAMAYÜZEY : ÇİNKO KAPLAMADÖNME AÇISI : 1100

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1WELDING PART : STEEL, COPPER PLATEDFINISH : ZINC PLATEDROTATION ANGLE : 1100


MENTEŞELER

GİZLİ PANO MENTEŞESİCONCEALED PANEL HINGE 347

YAYLI MİL MENTEŞEHINGE PIN WITH SPRING SYSTEM 300

MALZEMEGÖVDE : ÇELİKYÜZEY : BAKIR KAPLAMA

MATERIALBODY : STEELFINISH : COPPER PLATED




HINGES

YAYLI MİL MENTEŞEHINGE PIN WITH SPRING SYSTEM300-1

300-2

YAYLI MİL MENTEŞEHINGE PIN WITH SPRING SYSTEM300-3



MALZEMEGÖVDE : ÇELİKYÜZEY : BAKIR KAPLAMA

MATERIALBODY : STEELFINISH : COPPER PLATED


MENTEŞELER



MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1ARA PARÇA : ÇELİKDÖNME AÇISI : 1100

YÜZEY GÖVDE : ÇİNKO KAPLAMAARA PARÇA : BAKIR KAPLAMA

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1WELDING PART : STEELROTATION ANGLE : 1100

FINISHBODY : ZINC PLATEDWELDING PART : COPPER PLATED


HINGES

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1ARA PARÇA : ÇELİKDÖNME AÇISI : 1300


MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1WELDING PART : STEELROTATION ANGLE : 1300







MENTEŞELER

PANO ÖRTÜ SACI MENTEŞESİPANEL INSIDE COVER HINGES 355


MALZEMEGÖVDE : ÇELİKDÖNME AÇISI : 1100YÜZEY : ÇİNKO KAPLAMA

MATERIALBODY : STEELROTATION ANGLE : 1100 FINISH : ZINC PLATED

MALZEMEGÖVDE : ÇELİKARA PARÇA : ÇELİKDÖNME AÇISI : 1100


MATERIALBODY : STEELWELDING PART : STEELROTATION ANGLE : 1100


M1 M2


HINGES

MALZEMEGÖVDE : ÇELİK

MATERIALBODY : STEEL

MALZEMEGÖVDE : ZAMAK DIN-EN 1774ZnAICu1PİM : ÇELİKD. AÇISI : 180°YÜKSEKLİK : 0YÜZEY : KROM KAPLAMA-STATİK BOYALI

MATERIALBODY : ZAMAK DIN-EN 1774ZnAICu1PIN : STEELR. ANGLE : 180°HEIGHT : 0FINISH : CHROME PLATED-STATIC PAINTED

175 CM BOY MENTEŞE175 CM BAND HINGE316

YATAKLI MENTEŞEHINGE WITH BEARING330-1-0

YATAKLI MENTEŞEHINGE WITH BEARING330-2-0



MENTEŞELER

PANO KAPAK MENTEŞESİPANEL COVER HINGE 331

PANO KAPAK MENTEŞESİPANEL COVER HINGE 331-1

MALZEMEALT PARÇA : ÇELİKÜST PARÇA : ZAMAK DIN-EN 1774ZnAICu1PİM : ÇELİKD. AÇISI : 180°YÜZEY : KROM KAPLAMA-STATİK BOYALI

MATERIALBASE : STEELHOLDER : ZAMAK DIN-EN 1774ZnAICu1PIN : STEELR. ANGLE : 180°FINISH : CHROME PLATED-STATIC PAINTED


HINGES

MALZEMEALT PARÇA : ÇELİKÜST PARÇA : ZAMAK DIN-EN 1774ZnAICu1PİM : ÇELİKD. AÇISI : 180°YÜZEY : KROM KAPLAMA-STATİK BOYALI

MATERIALBASE : STEELHOLDER : ZAMAK DIN-EN 1774ZnAICu1PIN : STEELR. ANGLE : 180°FINISH : CHROME PLATED-STATIC PAINTED

PANO KAPAK MENTEŞESİPANEL COVER HINGE331-2

PANO KAPAK MENTEŞESİPANEL COVER HINGE331-3


MENTEŞELER

PANO KAPAK MENTEŞESİPANEL COVER HINGE 310AK


MALZEMEGÖVDE : ZAMAK DIN-EN 1774ZnAICu1PİM : ÇELİKD. AÇISI : 90°YÜZEY : KROM KAPLAMA-STATİK BOYALI

MATERIALBODY : ZAMAK DIN-EN 1774ZnAICu1PIN : STEELR. ANGLE : 90°FINISH : CHROME PLATED-STATIC PAINTED

310K

310A

MALZEMEGÖVDE : ZAMAK DIN-EN 1774ZnAICu1PİM : ÇELİKD. AÇISI : 90°YÜZEY : KROM KAPLAMA-STATİK BOYALI

MATERIALBODY : ZAMAK DIN-EN 1774ZnAICu1PIN : STEELR. ANGLE : 90°FINISH : CHROME PLATED-STATIC PAINTED




HINGES

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAICu1PİM : ÇELİK - POLIASETAL (POM)YÜZEY : KROM KAPLAMA-STATİK BOYALI

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAICu1PIN : ÇELİK - POLIASETAL (POM)FINISH : CHROME PLATED-STATIC PAINTED

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30PİM : ÇELİK - POLIASETAL (POM)

MATERIALBODY : POLYAMIDE PA6 GFR 30PIN : STEEL - POLIASETAL (POM)

1800 GEÇME MENTEŞE1800 CORNER HINGE311

311P

311K

1800 GEÇME MENTEŞE1800 CORNER HINGE311P-1


PLASTİKPLASTIC

P1PLASTİKPLASTIC

P2ÇELİKSTEEL

SAC KALINLIĞIPLATE THICKNESS

M1 1 mm

M2 1,5 mm

M3 2 mm


MENTEŞELER

P1PLASTİKPLASTIC

P2ÇELİKSTEEL


1800 GEÇME MENTEŞE1800 CORNER HINGE 312

312-1

MALZEMEALT PARÇA : ZAMAK DIN-EN 1774 ZnAICu1 ÜST PARÇA : ZAMAK DIN-EN 1774 ZnAICu1 PİM : ÇELİKD. AÇISI : 180°YÜZEY : STATİK BOYALI

MATERIALBASE : ZAMAK DIN-EN 1774 ZnAICu1 HOLDER : ZAMAK DIN-EN 1774 ZnAICu1 PIN : STEELR. ANGLE : 180°FINISH : STATIC PAINTED

SAĞ / RIGHT

SOL / LEFT

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAICu1PİM : ÇELİK - POLIASETAL (POM)D. AÇISI : 180°YÜZEY : KROM KAPLAMA-STATİK BOYALI

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAICu1PIN : STEEL - POLIASETAL (POM)R. ANGLE : 180°FINISH : CHROME PLATED-STATIC PAINTED


SİYAH BOYALIBLACK PAINTED


HINGES

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAICu1PİM : ÇELİKYÜZEY : KROM KAPLAMA-STATİK BOYALID. AÇISI : 180°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAICu1PIN : STEELFINISH : CHROME PLATED-STATIC PAINTEDR. ANGLE : 180°

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAICu1PİM : ÇELİKCİVATA : M5 ÇELİKYÜZEY : KROM KAPLAMA-STATİK BOYALID. AÇISI : 180°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAICu1PIN : STEELSCREW : M5 STEELFINISH : CHROME PLATED-STATIC PAINTEDR. ANGLE : 180°

YAPRAK MENTEŞİLEAF HINGE317

317-1

321

YAPRAK MENTEŞİLEAF HINGE321-1

40X40ITSSELF SCREW

40X40ITSSELF SCREW

40X40

40X40


MENTEŞELER

YAPRAK MENTEŞİLEAF HINGE 325

YAPRAK MENTEŞİLEAF HINGE 317-1-2

321-1-2

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30 PİM : ÇELİKD. AÇISI : 180°

MATERIALBODY : POLYAMIDE PA6 GFR 30PIN : STEELR. ANGLE : 180°



40x40ONLY SIDE

ITSSELF SCREW

40x40ONLY SIDE

ITSSELF SCREW

40x40PLASTIC


HINGES






318-1

322


50x50ITSSELF SCREW

50x50ITSSELF SCREW

50x50

50x50


MENTEŞELER



322-1-2



MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAICu1PİM : ÇELİKCİVATA : M6 ÇELİKYÜZEY : KROM KAPLAMA-STATIK BOYALID. AÇISI : 180°


50x50ONLY SIDE

ITSSELF SCREW

50x50ONLY SIDE

ITSSELF SCREW

50x50PLASTIC


HINGES






323


50x63PLASTIC

50X63

50X63


MENTEŞELER





324-1

324

50x76

50x76

50x76

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAICu1PİM : ÇELİKYÜZEY : STATİK BOYALID. AÇISI : 180°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAICu1PIN : STEELFINISH : STATIC PAINTEDR. ANGLE : 180°

50x76


HINGES

329







50x76PLASTIC

60x60ITSSELF SCREW

60x60ONLY SIDE

ITSSELF SCREW


MENTEŞELER



329-2

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAICu1PİM : ÇELİKYÜZEY : KROM KAPLAMAD. AÇISI : 180°

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAICu1PIN : STEELFINISH : CHROME PLATEDR. ANGLE : 180°



60x60

60x60ITSSELF SCREW

60x60ONLY SIDE

ITSSELF SCREW


HINGES

YAPRAK MENTEŞİLEAF HINGE329-2-2

350






60x60

60x60ITSSELF SCREW

60x60ONLY SIDE

ITSSELF SCREW


MENTEŞELER







60x90

60x120ITSSELF SCREW


HINGES







60x120ONLY SIDE

ITSSELF SCREW

60x120


MENTEŞELER

YAPRAK MENTEŞİLEAF HINGE 352-1






60x90ITSSELF SCREW

60x120ONLY SIDE

ITSSELF SCREW


HINGES







60x90

60x120ITSSELF SCREW


MENTEŞELER

PANO KAPAK MENTEŞİPANEL COVER HINGE 353-1-2

PANO KAPAK MENTEŞİPANEL COVER HINGE 353-1





60x120ONLY SIDE

ITSSELF SCREW

60x120

Pano AksesuarlarıPano Kapak Contaları

Panel AccessoriesPanel Cover Gasgets


Bölüm 6 Part 6


PANO AKSESUARLARI

HAVALANDIRMA PANJURUVANTILATION FILTER 701-1

HAVALANDIRMA PANJURUVANTILATION FILTER 701

MALZEMEGÖVDE : ABSFİLTRE : T200 (G3 EN779) O’RING : 3mm EPDM

MATERIALBODY : ABSFILTER : T200 (G3 EN779) O’RING : 3mm EPDM

RAL 7032 / RAL 7035

SİYAH / BLACK

150X150

150X150


PANEL ACCESSORIES

HAVALANDIRMA PANJURU FANLIVANTILATION SHUTTER WITH FAN701-2-1

HAVALANDIRMA PANJURUVANTILATION SHUTTER701-2

MALZEMEGÖVDE : ABSFİLTRE : T200 (G3 EN779) O’RING : 3mm EPDM

MATERIALBODY : ABSFILTER : T200 (G3 EN779) O’RING : 3mm EPDM

RAL 7032 / RAL 7035

RAL 7032 / RAL 7035

250x250

250x250


PANO AKSESUARLARI

HAVALANDIRMA FANIVANTILATION FAN 704-1

HAVALANDIRMA PANJURUVANTILATION FILTER 726

HAVALANDIRMA FANIVANTILATION FAN 704

ÖZELLİKLERÖLÇÜ : 172x150x51mmVOLT : 220/240GÜÇ : 32/31w/snFREKANS : 50/60hzHAVA : 176/178m³

SPECEFICATIONSSIZE : 172x150x51mmVOLT : 220/240POWER : 32/31w/snFREQUENCY : 50/60hzAIR : 176/178m³

MALZEMEABSKENDİNDEN YAPIŞKANLI

MATERIALABSSELF ADHESIVE

ÖZELLİKLERÖLÇÜ : 120x120x38mmVOLT : 220/240GÜÇ : 22/21w/snFREKANS : 50/60hzHAVA : 82/95m³

SPECEFICATIONSSIZE : 120x120x38mmVOLT : 220/240POWER : 22/21w/snFREQUENCY : 50/60hzAIR : 82/95m³


PANEL ACCESSORIES

PROJE CEBİ (A4)DRAWING POCKET (A4)227

PROJE CEBİ (A5)DRAWING POCKET (A5)226

MALZEMEANTİŞOKKENDİNDEN YAPIŞKANLI

MATERIALANTISOKSELF ADHESIVE


PANO AKSESUARLARI

TRİFAZE SAYAÇ OKUMA CAMIMETER GLASS 718

MONOFAZE SAYAÇ OKUMA CAMIMETER GLASS 717

MALZEMEPOLİCARBONATO’RING 4mm EPDM

MATERIALPOLICARBONATO’RING 4mm EPDM

MALZEMEPOLİCARBONATO’RING 3mm EPDM

MATERIALPOLICARBONATO’RING 3mm EPDM


PANEL ACCESSORIES

SAYAÇ ÇERÇEVESİMETER FRAME702

SAYAÇ ÇERÇEVESİMETER FRAME225

TRİFAZE SAYAÇ CAMIMETER GLASS719

MALZEMEPOLİCARBONATveya KRİSTAL

MATERIALPOLICARBONATor CYRISTAL

MALZEMEGÖVDE : ABSCAM : KRİSTAL

MATERIALBODY : ABSGLASS : CYRISTAL

MALZEMEPOLYAMİDE

MATERIALPOLYAMIDE


PANO AKSESUARLARI

GEÇME KAPAK TUTAMAĞI (ELÇEK)COVER PULL (SNAP IN) 703

PANO ASKI KULAĞIPANEL CONNECTION ELEMENT 705

KÖŞE TAKOZU (PLASTİK)CORNER WEDGE (PLASTIC) 022

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30İÇ PARÇA : ÇELİK

MATERIALBODY : POLYAMIDE PA6 GFR 30INSIDE : STEEL




PANEL ACCESSORIES

KAFES SOMUNPANEL CONNECTION NUT708-1

KAFES SOMUNPANEL CONNECTION NUT708

KABİN TOZ FIRÇASICABINET DUST BRUSH024/025

MALZEMEGÖVDE : ÇELİK

MATERIALBODY : STEEL

MALZEMEGÖVDE : ALÜMİNYUMFIRÇA : 0,25mm-0,40mm POLYAMIDE

MATERIALBODY : ALUMINIUMBRUSH : 0,25mm-0,40mm POLYAMIDE

M6SAC KALINLIĞI / PLATE THICKNESS

1.7-2.5 mm

M8SAC KALINLIĞI / PLATE THICKNESS

3,2-4,1 mm

024

025


PANO AKSESUARLARI

716-2

716-3

716-1

KELEBEK SOMUNBUTTERFLY NUT 716

MALZEME716 : SAC716-1 : SAC716-2 : SAC716-3 : ÇELİK

MATERIAL716 : IRON716-1 : IRON716-2 : IRON716-3 : STEEL

3/16

M5

M6

M6


PANEL ACCESSORIES

PLASTİK BAŞLI VİDAPLASTIC HEAD SECREW707

PLASTİK ARMUT KULPPLASTIC HANDLE215

PLASTİK BAŞLI VİDAPLASTIC HEAD SECREW707TB

MALZEMEPLS KAFA : PPCİVATA : ÇELİK

MATERIALPLS HEAD : PPSCREW : STEEL

MALZEMEPLS KAFA : POLYAMIDE PA6 GFR 30CİVATA : ÇELİK

MATERIALPLS HEAD : POLYAMIDE PA6 GFR 30SCREW : STEEL

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30SOMUN : PİRİNÇ

MATERIALBODY : POLYAMIDE PA6 GFR 30NUT : BRASS

MALZEMEGÖVDE : POLYAMIDE PA6 GFR 30CIVATA : ÇELİK

MATERIALBODY : POLYAMIDE PA6 GFR 30SCREW : STEEL

M6

PLASTİK KULPPLASTIC HANDLE720 PLASTİK KULP

PLASTIC HANDLE720-1

H

20 mm

25 mm

30 mm

35 mm

H

10 mm

15 mm

20 mm

25 mm

30 mm

35 mm


PANO AKSESUARLARI

213-290

213-202

PANO MAKASICOVER STAY 213-135

MAKİNA KAPAK KULBUHANDLE FOR MACHINERY COVER

706A2-A3-A4-A5

MALZEMEKENAR PARÇA : POLYAMIDE PA6 GFR 30KOL : ALÜMİNYUMYÜZEY : MAT ELOKSAL

MATERIALFIXING PART : POLYAMIDE PA6 GFR 30HANDLE : ALUMINIUMFINISH : DULL ELOXAL



SAĞ VEYA SOL TALEPLERİNİZİ BELİRTİNİZ.PLEASE SPECIFY RIGHT and LEFT APPLICATION.

L

200 mm

300 mm

400 mm

500 mm

L

135 mm

202 mm

290 mm


PANEL ACCESSORIES

MAKİNA KAPAK KULBUHANDE FOR MACHINERY COVER706-122

MAKİNA KAPAK KULBUHANDE FOR MACHINERY COVER706-115

ÇEKMECE KULBUHANDLE FOR DRAWER109

MALZEMEGÖVDE : ZAMAK DIN-EN 1774 ZnAI4Cu1YÜZEY : KROM KAPLAMA

MATERIALBODY : ZAMAK DIN-EN 1774 ZnAI4Cu1FINISH : CHROME PLATED




PANO AKSESUARLARI

714

713

V OTOMAT ETİKETİFUSE LABEL 712

V OTOMAT KAPATMA PLASTİĞİCLOSING PLASTIC OF V AUTOMAT 724

MALZEMEANTİŞOK

MATERIALANTISOK

MALZEMEGÖVDE: POLYAMIDE PA66CAM: KRİSTAL

MATERIALBODY: POLYAMIDE PA66GLASS: CYRISTAL


PANEL ACCESSORIES

METAL ETİKETLİKIRON SHEET LABEL

IST01-02-03-04

V OTOMAT ETİKETİ (12’Lİ TAKIM)FUSE LABEL715

İST-01

İST-02

İST-03

İST-04



MALZEMEABS

MATERIALABS


PANO AKSESUARLARI

PANO TAŞIMA HALKASIPANEL LIFTING KIT 709

710

711

711-1

711-2

PANO MONTAJ SOMUNUWING NUT 723

MALZEMEGÖVDE : DÖVME ÇELİKYÜZEY : ÇİNKO KAPLAMA




M8

M10

M12

M14

M16


PANEL COVER GASGETS

YAPIŞKANLI CONTASEALING TAPE404-427

MONTAJ BANTLARIMONTAGE TAPES

451-452453

YAPIŞKANLI CONTASEALING TAPE431-446

SAC KENAR FİTİLİPANEL TAPE401-403

MALZEME1x10 SİYAH/BLACK POLIETILEN1X20 SİYAH/BLACK POLIETILEN2X20 SİYAH/BLACK POLIETILEN

MALZEMEPVC0,80-1-1,5-2,5mm KALINLIĞINDASAÇ KAPAKLARDA KULLANILIR

MATERIALPVCFOR 0,80-1-1,5-2,5mmSTEEL COVERS

MALZEMEPOLİETİLEN

MATERIALPOLIETILEN

MALZEMEEPDM

MATERIALEPDM

451

452

453

403 401 401


PANO KAPAK CONTALARI

PANO ve MAKİNA KABİN LASTİĞİPANEL and MACHINERY CABINET GASKETING 402

PANO ve MAKİNA KABİN LASTİĞİPANEL and MACHINERY CABINET GASKETING 402-1


MALZEMEEPDM, SİYAH22mm OMURGA ÖRGÜLÜ TELAĞIRLIK (gr/m) 1252,5-3-3,5mm KALINLIĞINDASACLARDA KULLANILIR

MATERIALEPDM, BLACK22mm BACKBONE WIREWEIGHT (gr/m) 125FOR 2,5-3-3,5mmSTEEL COVERS

MALZEMEEPDM, SİYAH27mm OMURGA ÖRGÜLÜTELAĞIRLIK (gr/m) 1402-2,5-3-3,5-4mm KALINLIĞINDASACLARDA KULLANILIR

MATERIALEPDM, BLACK27mm BACKBONE WIREWEIGHT (gr/m) 140FOR 2-2,5-3-3,5-4mmSTEEL COVERS

MALZEMEEPDM, SİYAH27mm OMURGA ÖRGÜLÜ TELAĞIRLIK (gr/m) 1451-1,5-2-2,5mm KALINLIĞINDASACLARDA KULLANILIR

MATERIALEPDM, BLACK27mm BACKBONE WIREWEIGHT (gr/m) 145FOR 1-1,5-2-2,5mmSTEEL COVERS


PANEL COVER GASGETS

MALZEMEEPDM, SİYAH27mm OMURGA ÖRGÜLÜ TELAĞIRLIK (gr/m) 1802-2,5-3-3,5mm KALINLIĞINDASACLARDA KULLANILIR

MATERIALEPDM, BLACK27mm BACKBONE WIREWEIGHT (gr/m) 180FOR 2-2,5-3-3,5mmSTEEL COVERS

MALZEMEEPDM, SİYAH22mm OMURGA ÖRGÜLÜ TELAĞIRLIK (gr/m) 1201-1,5-2mm KALINLIĞINDASACLARDA KULLANILIR

MATERIALEPDM, BLACK22mm BACKBONE WIREWEIGHT (gr/m) 120FOR 1-1,5-2mmSTEEL COVERS

PANO ve MAKİNA KABİN LASTİĞİPANEL and MACHINERY CABINET GASKETING402-3



MALZEMEEPDM, SİYAH22mm OMURGA ÖRGÜLÜ TELAĞIRLIK (gr/m) 1151-1,5-2mm KALINLIĞINDASACLARDA KULLANILIR

MATERIALEPDM, BLACK22mm BACKBONE WIREWEIGHT (gr/m) 115FOR 1-1,5-2mmSTEEL COVERS


PANO KAPAK CONTALARI


MALZEMEEPDM, SİYAH27mm OMURGA METALAĞIRLIK (gr/m) 2252-2,5-3mm KALINLIĞINDASACLARDA KULLANILIR

MATERIALEPDM, BLACK27mm BACKBONE METALWEIGHT (gr/m) 225FOR 2-2,5-3mmSTEEL COVERS

KABİN CAM LASTİĞİCABINET GLASS RUBBER

4001-2-3

MALZEMEEPDM, SİYAH

MATERIALEPDM, BLACK

400-1

400-2

400-3

Mesnet İzalatörleri Insulators


Bölüm 7 Part 7


MESNET İZALATÖRLERİ

MESNET İZALATÖRINSULATOR 601

602

603

604

MALZEMEPOLYESTER

MATERIALPOLYESTER

CİVATA : M6 ÇELİKSCREW : M6 STEEL





INSULATORS

MALZEMEPOLYESTER

MATERIALPOLYESTER

MESNET İZALATÖRINSULATOR605

606

610

611

KÖR SOMUN : M8 PRİNÇBLIND NUT : M8 BRASS






TARAK İZALATÖR 3x1FINSULATOR 3x1F 607

TARAK İZALATÖR 3x2FINSULATOR 3x2F 608

MALZEMEPOLYESTER

MATERIALPOLYESTER


INSULATORS



BARA SERFİLERİ M8POT HOLDER M8609

BARA SERFİLERİ M10POT HOLDER M10609-1

KADEMELİ İZALATÖRINSULATOR612

MALZEMEPOLYESTER

MATERIALPOLYESTER



MESNET İZALATÖR (M6)INSULATOR (M6) 613



MALZEMEPOLYESTER

MATERIALPOLYESTER

MALZEMEPOLYESTER

MATERIALPOLYESTER

MALZEMEPOLYESTER

MATERIALPOLYESTER


INSULATORS

MESNET İZALATÖR (M8)INSULATOR (M8)616



MALZEMEPOLYESTER

MATERIALPOLYESTER

MALZEMEPOLYESTER

MATERIALPOLYESTER

MALZEMEPOLYESTER

MATERIALPOLYESTER

45

50

BÖLÜM/PART 1 İSPANYOLET KOLLU PANO KİLİTLERİ / ROD LATCH SYSTEM SWING HANDLE .......................5001 KOLLUPANOKİLİDİ/SWINGHANDLE ..................................................................................................................6.003 KOLLUPANOKİLİDİ/SWINGHANDLE ..................................................................................................................6.002 KOLLUPANOKİLİDİ/SWINGHANDLE ..................................................................................................................7002A KOLLUPANOKİLİDİ(ASMAHAMİLLİ)SWINGHANDLE(FORPADLOCK)..........................................................7005 KOLLUPANOKİLİDİ/SWINGHANDLE ..................................................................................................................8007 KOLLUPANOKİLİDİ/SWINGHANDLE ..................................................................................................................9007A KOLLUPANOKİLİDİ(ASMAKİLİTLİ)SWINGHANDLE(FORPADLOCK) ......................................................... 10007B KOLLUPANOKİLİDİ(ASMAKİLİTLİ)SWINGHANDLE(FORPADLOCK) ......................................................... 11008 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 12008-1 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 12009 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 13009-1 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 13010 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 14010A KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 14208 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 15208A KOLLUPANOKİLİDİ(ASMAKİLİT)/SWINGHANDLE(FORPADLOCK) .......................................................... 15208DB KOLLUPANOKİLİDİ(ASMAKİLİT)/SWINGHANDLE(FORPADLOCK) .......................................................... 15210 İSPANYOLETPANOKİLİDİ/ESPAGNOLETTEPANELLOCK ............................................................................... 16. İSP. ÇUBUK VE AKSESUARLARI/ROD LATCH SYSTEM207 T1ISPANYOLETÇUBUK/T1ESPAGNOLETTEROD ............................................................................................ 17207-1 T1ISPANYOLETÇUBUK/T1ESPAGNOLETTEROD ............................................................................................ 17207A PLASTİKÇUBUKYATAĞI/ROUNDRODGUIDE................................................................................................... 17207RB ÇUBUKTUTUCU/RODHOLDER ........................................................................................................................... 17209-22 T2ISPANYOLETÇUBUK/T2ESPAGNOLETTEROD........................................................................................... 18209-24 T2ISPANYOLETÇUBUK/T2ESPAGNOLETTEROD ............................................................................................ 18209ÇKS ÇOKKİLİTLEMELİİSPANYOLETÇUBUK/MULTIPLELOCKINGFLATROD ...................................................... 18209A LAMAYATAĞI/FLATRODGUIDE ......................................................................................................................... 18209LKY LAMAKİLİTLEMEYATAĞI/DUALROLLERCATCHER ......................................................................................... 18

BÖLÜM/PART 2 KOLLU PANO KİLİTLERİ/SWING HANDLE ......................................................................19001-2 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 20001-2-1 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 20002-2 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 21002A-2 KOLLUPANOKİLİDİ(ASMAHAMİLLİ)/SWINGHANDLE(FORPADLOCK) .................................................... 21004 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 22004A KOLLUPANOKİLİDİ(ASMAHAMİLLİ)/SWINGHANDLE(FORPADLOCK) .................................................... 22005-1 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 23006 PANOKİLİDİ(DB)/SWINGHANDLE(DB) .......................................................................................................... 23007-1 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 24007-1B KOLLUPANOKİLİDİ(ASMAKİLİTLİ)/SWINGHANDLE(FORPADLOCK) ....................................................... 24008-2 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 25008-3 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 25009-2 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 26.009-3 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 26.010-1 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 27010-1A KOLLUPANOKİLİDİ(ASMAHAMİLLİ)/SWINGHANDLE(FORPADLOCK) .................................................... 27011 KOLLUPANOKİLİDİ(ASMAHAMİLLİ)/SWINGHANDLE(FORPADLOCK) .................................................... 27206 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 28206A KOLLUPANOKİLİDİ(ASMAKİLİTLİ)/SWINGHANDLE(FORPADLOCK) ....................................................... 28206DB KOLLUPANOKİLİDİ(ASMAKİLİTLİ)/SWINGHANDLE(FORPADLOCK) ....................................................... 28208-1 KOLLUPANOKİLİDİ/SWINGHANDLE ............................................................................................................... 29210-1 T3PANOKİLİDİ/T3PANELLOCK ....................................................................................................................... 29246 TKOLLUPANOKİLİDİ/THANDLE ...................................................................................................................... 30247 LKOLLUPANOKİLİDİ/LHANDLE ...................................................................................................................... 30020 FONKSİYONELKİLİT/FUNCTIONALLOCK ......................................................................................................... 31021 FONKSİYONELKİLİT(OTOMATİK)/FUNCTIONALLOCK(AUTOMATIC)............................................................ 31030-M1 FONKSİYONELKİLİT/FUNCTIONALLOCK ......................................................................................................... 32030-M2 FONKSİYONELKİLİT/FUNCTIONALLOCK ......................................................................................................... 32 KABİN KİLİTLERİ/CABINET LOCKS252 KABİNKİLİDİ/CABINETLOCK ............................................................................................................................ 33253 KABİNKİLİDİ(PASLANMAZ)/CABINETLOCK(STAINLESSSTEEL) ................................................................ 34254 KABİNKİLİDİ(ASMAHAMİLLİ)/CABINETLOCK(FORPADLOCK) .................................................................. 35

BÖLÜM/PART 3 YAYLI PANO KİLİTLERİ/QUARTER TURN LOCKS ..............................................................37201 YAYLIPANOKİLİDİ(DB)/QUARTERTURNLOCKS(DB) .................................................................................. 38201SB YAYLIPANOKİLİDİ(STATİKBOYALI-DB)/QUARTERTURNLOCKS(STATICPAINTED-DB) ..................... 38202 YAYLIPANOKİLİDİ(ISP)/QUARTERTURNLOCKS(ESP) ................................................................................ 38201P PLSYAYLIPANOKİLİDİ(ZAMAKDBGÖB.)/QUARTERTURNLOCKS(ZAMAKINSERT-DB) ....................... 39201PG PLSYAYLIPANOKİLİDİ(PLSGÖBEKLİ-DB)/QUARTERTURNLOCKS(PLSINSERT-DB) ........................... 39201A YAYLIPANOKİLİDİ(ÜÇGEN)/QUARTERTURNLOCKS(TRIANGLE) ............................................................... 40201A-1 YAYLIPANOKİLİDİ(ÜÇGEN-STATİKBOYALI)/QUARTERTURNLOCKS(TRIANGLE-STATICPAINTED).. 40201PU PLSYAYLIPANOKİLİDİ(ZAMAKÜÇGENGÖB.)/QUARTERTURNLOCKS(ZAMAKTRIANGLEINSERT) .... 40201B YAYLIPANOKİLİDİ(ZAMAKKAREGÖBEKLİ)/QUARTERTURNLOCKS(ZAMAKSQUAREINSERT) ........... 41201B-1 YAYLIPANOKİLİDİ(STATİKBOYALI)/QUARTERTURNLOCKS(STATICBLACKPAINTED) .......................... 41201PK PLSYAYLIPANOKİLİDİ(ZAMAKKAREGÖBEKLİ)/QUARTERTURNLOCKS(ZAMAKSQUAREINSERT) ... 41201C YAYLIPANOKİLİDİ(ZAMAKALLENGÖBEKLİ)/QUARTERTURNLOCKS(ZAMAKALLENINSERT) ........... 41204 YAYLIPANOKİLİDİ(METALKELEBEK)/QUARTERTURNWITHWINGKNOB ................................................ 42204SB YAYLIPANOKİLİDİ(STATİKBOYALISİYAH)/QUARTERTURNWITHWINGKNOB(STA.PAINTEDBLACK) . 42205 YAYLIPANOKİLİDİ(PLSKELEBEK)QUARTERTURNWITHWINGKNOB(PLSBUTTERFLYKEY) ................ 42242 SİLİNDİRLİYAYLIPANOKİLİDİ/CAMLOCK ...................................................................................................... 43243 SİLİNDİRLİYAYLIPANOKİLİDİ/CAMLOCK ...................................................................................................... 43244 SİLİNDİRLİYAYLIPANOKİLİDİ/CAMLOCK ...................................................................................................... 43232 SİLİNDİRLİYAYLIPANOKİLİDİ/CAMLOCKWITHWINGKNOB ..................................................................... 44232-1 SİLİNDİRLİYAYLIPANOKİLİDİ/CAMLOCKWITHWINGKNOB ..................................................................... 44245 BİLYALIPANOKİLİDİ(KELEBEKANAHTARLI)/PADLOCKABLEWINGKNOB ................................................. 44233-30 YAYLIPANOKİLİDİ/QUARTERTURNWITHSPRING ........................................................................................ 45233-35 YAYLIPANOKİLİDİ/QUARTERTURNWITHSPRING ........................................................................................ 45233-40 YAYLIPANOKİLİDİ/QUARTERTURNWITHSPRING ........................................................................................ 45233-50 YAYLIPANOKİLİDİ/QUARTERTURNWITHSPRING ........................................................................................ 46.

233-60 YAYLIPANOKİLİDİ/QUARTERTURNWITHSPRING ........................................................................................ 46.231 YAYLIPANOKİLİDİ(DÖRTGEN)/QUADRANGLEQUARTERTURNWITHSPRING .......................................... 47231-1 YAYLIPANOKİLİDİ(DÖRTGEN/QUADRANGLEQUARTERTURNWITHSPRING ........................................... 47231-2 YAYLIPANOKİLİDİ(DÖRTGEN)/QUADRANGLEQUARTERTURNWITHSPRING ......................................... 47231-3 YAYLIPANOKİLİDİ(DÖRTGEN)/QUADRANGLEQUARTERTURNWITHSPRING .......................................... 47250 DÖRTGENYAYLIPANOKİLİDİ/QUADRANGLEQUARTERTURNWITHSPRING .............................................. 48230 SÜRGÜKİLİT/SILIDINGLOCK ............................................................................................................................. 48230-1 MİNİSÜRGÜKİLİT/MINISILIDINGLOCK .......................................................................................................... 48236 MİNİYAYLIPANOKİLİDİ/MINICAMLOCKWITHWINGKNOB ....................................................................... 49236-1 MİNİYAYLIPANOKİLİDİ/MINICAMLOCKWITHWINGKNOB ....................................................................... 49241 MİNİYAYLIPANOKİLİDİ/MINICAMLOCKWITHWINGKNOB ....................................................................... 49237 MİNİYAYLIPANOKİLİDİ(DB)/MINICAMLOCKWITHWINGKNOB(DB) ...................................................... 50237-1 MİNİYAYLIPANOKİLİDİ(DB)/MINICAMLOCKWITHWINGKNOB(DB) ...................................................... 50238 MİNİYAYLIPANOKİLİDİ(ÜÇGEN)/MINICAMLOCKWITHWINGKNOB(TRIANGLE) .................................. 50238-1 MİNİYAYLIPANOKİLİDİ(ÜÇGEN)/MINICAMLOCKWITHWINGKNOB(TRIANGLE) .................................. 50239 MİNİYAYLIPANOKİLİDİ(KARE)/MINICAMLOCKWITHWINGKNOB(SQUARE) ........................................ 51239-1 MİNİYAYLIPANOKİLİDİ(KARE)/MINICAMLOCKWITHWINGKNOB(SQUARE) ....................................... 51240 MİNİYAYLIPANOKİLİDİ(TORNAVİDABAŞLI)/MINICAMLOCKWITHWINGKNOB(SCREWDRIVERKEY) 51240-1 MİNİYAYLIPANOKİLİDİ(TORNAVİDABAŞLI)/MINICAMLOCKWITHWINGKNOB(SCREWDRIVERKEY) 51255-1 YAYLIPANOKİLİDİ(METALKELEBEK)/QUARTERTURNWITHWINGKNOB(BUTTERFLYKEY) ................ 52256-1 YAYLIPANOKİLİDİ(METALKELEBEK)/QUARTERTURNWITHWINGKNOB(BUTTERFLYKEY) ............... 52256 YAYLIPANOKİLİDİ(METALKELEBEK)/QUARTERTURNWITHWINGKNOB(BUTTERFLYKEY) ................ 52 ANAHTARLAR/KEYS203-1 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 53203-2 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 53203-1-1 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 53203-1-2 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 53203-2-1 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 54203-2-2 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 54203-2-3 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 54203-2-4 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 54203-4 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 55203-5 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 55203-3 YAYLIPANOKİLİTANAHTARLARI/PANELLOCKKEYS ..................................................................................... 55 PLASTİK PANO KİLİTLERİ/PLASTIC PANEL LOCK221 ALLENPANOKİLİDİ/ALLENPANELLOCK ......................................................................................................... 56.221A ALLENPANOKİLİTANAHTARI/ALLENPANELLOCKKEY ................................................................................ 56.728 MİNİPLASTİKKİLİT/MINIPLASTICLOCK ...................................................................................................... 56.222 KALDIRÇEVİRPANOKİLİDİ/LIFTandTURNPANELLOCK ............................................................................. 56.224 PLASTIKPANOMANDALI/PLASTICPANELLATCH........................................................................................... 57211 KAPAZLAMAKİLİT/IRONLOCK .......................................................................................................................... 57212 OTOMATİKPANOKİLİDİ/AUTOMATICPANELLOCK ......................................................................................... 58721 KAPUTKİLİDİ(BÜYÜK)/COVERLOCK(BIG)...................................................................................................... 58721-1 KAPUTKİLİDİ(BÜYÜK)/COVERLOCK(BIG)...................................................................................................... 58

BÖLÜM/PART 4 ÇEKMECE KİLİTLERİ/CAM LOCK ..................................................................................59223 MANDALLIKİLİT(PLASTİK)/CAMLOCK(PLASTIC) ......................................................................................... 6.0101 MANDALLIKİLİT(ŞİFRELİveSEGMANLI)/CAMLOCK(WITHCIPHERandSEGMENT) .............................. 6.0104 MANDALLIKİLİTEĞRİDİLLİ(ŞİFRELİveSEGMANLI)/CAMLOCK(WHITCIPHERandSEGMENT) ........... 6.0214A KİLİTTUTAMAĞI/HANDLEFORLOCK ................................................................................................................ 6.0101-2 MANDALLIKİLİT(ŞİFRELİveSEGMANLI)/CAMLOCK(WITHCIPHERandSEGMENT) ............................... 6.1 101-3 MANDALLIKİLİT(ŞİFRELİ)/CAMLOCK(WITHCIPHER) ................................................................................ 6.1101-4 MANDALLIKİLİT(PASLANMAZTOZKAPAKLI)/CAMLOCK(STAINLESSSTEELDUSTCAP) ....................... 6.2114 MİNİMANDALLIKİLİT/MINICAMLOCK ........................................................................................................... 6.2103 MANDALLIKİLİT(ASMAHAMİLLİ)/CAMLOCK(FORPADLOCK) .................................................................... 6.3103E MANDALLIKİLİT(ASMAHAMİLLİ)/CAMLOCK(FORPADLOCK) .................................................................... 6.3108 MANDALLIKİLİT(KELEBEK)/PADLOCKABLEWINGKNOB ............................................................................. 6.3108-1 MANDALLIKİLİT(KELEBEK-TIRNAKLIKOVAN)/PADLOCKABLEWINGKNOB ............................................. 6.3112 MANDALLIKİLİT(İSP)/CAMLOCK(ESPCIPHERSEGMENT) ......................................................................... 6.4113 TORNAVİDABAŞLI/SCREWDRIVERKEY ........................................................................................................... 6.4216 BİLYALIPANOKİLİDİ/CAMLOCKWITHBALL(TRIANGLE) .............................................................................. 6.4105 TÇELİKDOLAPKOLLUKİLİT/CAMLOCKTHANDLE ....................................................................................... 6.5105-1 LÇELİKDOLAPKOLLUKİLİT/CAMLOCKLHANDLE ....................................................................................... 6.5128 KESONKİLİDİ/DOCUMENTCABINETLOCK ...................................................................................................... 6.8 PİRİNÇ ÇEKMECE KİLİTLERİ/BRASS CAM LOCK120 KISAMANDALLIKİLİT/SHORTLOCKWITHLATCH .......................................................................................... 6.6.121 UZUNMANDALLIKİLİT/LONGLOCKWITHLATCH ........................................................................................... 6.6.123 KISAÜNİVERSALKİLİT/SHORTUNIVERSALLOCK .......................................................................................... 6.6.124 UZUNÜNİVERSALKİLİT/LONGUNIVERSALLOCK ........................................................................................... 6.6.125 KARTOTEKSKİLİT/CARDINDEXLOCK .............................................................................................................. 6.7126 ETEJERKİLİDİ/ETEJERLOCK............................................................................................................................. 6.7127 ALLENGÖBEKLİMANDALLIKILIT/PANELLOCKWITHALLENSHAFT .......................................................... 6.7 DOSYA DOLAP KİLİDİ/DOCUMENT CABINET LOCK .......................................................................................106 DOSYAKALIPKİLİDİ/DOCUMENTCABINETLOCK ........................................................................................... 6.8106-3 DOSYADOLAPKİLİDİ/DOCUMENTCABINETLOCK .......................................................................................... 6.8106-5-1 DOSYADOLAPKİLİDİ/DOCUMENTCABINETLOCK .......................................................................................... 6.9115 DOLAPKİLİDİ/CABINETLOCK ............................................................................................................................ 6.9 YANGIN DOLAP KİLİDİ/FIRE CABINET LOCK106-4 YANGINDOLAPKİLİDİ/FIRECABINETLOCK .................................................................................................... 70106-5 YANGINDOLAPKİLİDİ/FIRECABINETLOCK .................................................................................................... 70 AHŞAP ÇEKMECE KİLİTLERİ/FURNITURE LOCK130 ÇEKMECEKİLİDİ(KARE)/FURNITURELOCK(SQUARE) .................................................................................. 71133 ÇEKMECEKİLİDİ(OVAL)/FURNITURELOCK(ROUND)..................................................................................... 71138 ÇEKMECEKİLİDİ(KARE)/FURNITURELOCK(SQUARE) .................................................................................. 71111 KİLİTKARŞILIĞI/CAMHOLDER .......................................................................................................................... 71135 CAMKİLİDİ(TEKKANATLI)/GLASSLOCK(ONESIDE) .................................................................................... 72136 CAMKİLİDİ(ÇİFTKANAT)/GLASSLOCK(DOUBLESIDE) ................................................................................ 72137 CAMKİLİDİ(SÜRGÜLÜ)/GLASSLOCK(SLIDING)............................................................................................. 72139 MERKEZİKİLİT(ÖNDEN50cm)/CENTRALLOCK(MOUNTSYSTEM50cm)................................................ 73140 MERKEZİKİLİT(YANDAN60cm)/CENTRALLOCK(TOPMOUNTSIDE60cm) ............................................ 73

KOD/CODE ÜRÜNADI/PRODUCTNAME........................................................................................................ SAYFANO/PAGENO KOD/CODE ÜRÜNADI/PRODUCTNAME........................................................................................................ SAYFANO/PAGENOINDEX

BÖLÜM/PART 5 MENTEŞELER/HINGES .............................................................................................75301 8MMKÜPMENTEŞE/8MMPANELHINGE ................................................................................................... 76.302 10MMKÜPMENTEŞE/10MMPANELHINGE .............................................................................................. 76.303 12MMKÜPMENTEŞE/12MMPANELHINGE .............................................................................................. 76.302K 10MMKÜPMENTEŞE/10MMPANELHINGE .............................................................................................. 76.303K 12MMKÜPMENTEŞE/12MMPANELHINGE .............................................................................................. 76.306 12MMBAĞLANTILIKÜPMENTEŞE/12MMPANELHINGE ......................................................................... 77307 16MMKÜPMENTEŞE/16MMPANELHINGE .............................................................................................. 77306K 12MMKÜPMENTEŞE(NİKELKAPLAMA)/12MMPANELHINGE(NICKELPLATED) ............................... 77307K 16MMKÜPMENTEŞE(NİKELKAPLAMA)/16MMPANELHINGE(NICKELPLATED) ............................... 77332 12MMKÜPMENTEŞE12MMPANELHINGE ................................................................................................. 78333 PROFİLMENTEŞE/PROFILEHINGE ................................................................................................................ 78340 PROFİLMENTEŞE/PROFILEHINGE ................................................................................................................ 78341 PROFİLMENTEŞE/PROFILEHINGE ................................................................................................................ 78 GİZLİ PANO MENTEŞESİ/CONCEALED PANEL HINGE308 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 79308-1 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 79308-1-2 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 79308-2 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 80308-2-1 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 80308-3 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 80342 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 81309 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 81309A GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 81347 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 82300 YAYLIMİLMENTEŞE/HINGEPINWITHSPRINGSYSTEM ............................................................................ 82300-1 YAYLIMİLMENTEŞE/HINGEPINWITHSPRINGSYSTEM ............................................................................ 83300-2 YAYLIMİLMENTEŞE/HINGEPINWITHSPRINGSYSTEM ............................................................................ 83300-3 YAYLIMİLMENTEŞE/HINGEPINWITHSPRINGSYSTEM ............................................................................ 83343 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 84349 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 84348 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 85354 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 85355 PANOÖRTÜSACIMENTEŞESİ/PANELINSIDECOVERHINGES ................................................................... 86.356 GİZLİPANOMENTEŞESİ/CONCEALEDPANELHINGE ................................................................................... 86.316 175CMBOYMENTEŞE/175CMBANDHINGE.............................................................................................. 87 PANO MENTEŞELERİ/PANEL HINGES330-1-0 YATAKLIMENTEŞE/HINGEWITHBEARING .................................................................................................... 87330-2-0 YATAKLIMENTEŞE/HINGEWITHBEARING .................................................................................................... 87331 PANOKAPAKMENTEŞESİ/PANELCOVERHINGE .......................................................................................... 88331-1 PANOKAPAKMENTEŞESİ/PANELCOVERHINGE .......................................................................................... 88331-2 PANOKAPAKMENTEŞESİ/PANELCOVERHINGE .......................................................................................... 89331-3 PANOKAPAKMENTEŞESİ/PANELCOVERHINGE .......................................................................................... 89310 PANOKAPAKMENTEŞESİ/PANELCOVERHINGE .......................................................................................... 90310K PANOKAPAKMENTEŞESİ/PANELCOVERHINGE .......................................................................................... 90310A PANOKAPAKMENTEŞESİ/PANELCOVERHINGE .......................................................................................... 90310AK PANOKAPAKMENTEŞESİ/PANELCOVERHINGE .......................................................................................... 90311 1800GEÇMEMENTEŞE/1800CORNERHINGE ............................................................................................. 91311K 1800GEÇMEMENTEŞE/1800CORNERHINGE ............................................................................................. 91311P 1800GEÇMEMENTEŞE/1800CORNERHINGE ............................................................................................. 91311P-1 1800GEÇMEMENTEŞE/1800CORNERHINGE ............................................................................................. 91312 1800GEÇMEMENTEŞE/1800CORNERHINGE ............................................................................................. 92312-1 1800GEÇMEMENTEŞE/1800CORNERHINGE ............................................................................................. 92344 PANOKAPAKMENTEŞESİ/PANELCOVERHINGE .......................................................................................... 92 YAPRAK MENTEŞELER/LEAF HINGES317 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 93321 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 93317-1 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 93321-1 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 93317-1-2 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 94321-1-2 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 94325 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 94318 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 95322 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 95318-1 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 95322-1 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 95318-1-2 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 96.322-1-2 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 96.326 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 96.319 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 97323 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 97327 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 97320 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 98324 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 98324-1 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 98324-1-2 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 98328 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 99329 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 99329-1 YAPRAKMENTEŞİ/LEAFHINGE ...................................................................................................................... 99329-1-2 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................100329-2 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................100329-2-1 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................100329-2-2 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................101350 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................101350-1 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................101350-1-2 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................102351 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................102351-1 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................103351-1-2 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................103352 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................104

352-1 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................104352-1-2 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................105353 YAPRAKMENTEŞİ/LEAFHINGE ....................................................................................................................105353-1 PANOKAPAKMENTEŞİ/PANELCOVERHINGE ............................................................................................106.353-1-2 PANOKAPAKMENTEŞİ/PANELCOVERHINGE ............................................................................................106.

BÖLÜM/PART 6 PANO AKSESUARLARI/PANEL ACCESSORIES ............................................................. 107 701 HAVALANDIRMAPANJURU/VANTILATIONFILTER .......................................................................................108701-1 HAVALANDIRMAPANJURU/VANTILATIONFILTER .......................................................................................108701-2 HAVALANDIRMAPANJURU/VANTILATIONSHUTTER ...................................................................................109701-2-1 HAVALANDIRMAPANJURUFANLI/VANTILATIONSHUTTERWITHFAN .....................................................109704 HAVALANDIRMAFANI/VANTILATIONFAN ....................................................................................................110704-1 HAVALANDIRMAFANI/VANTILATIONFAN ....................................................................................................110726 HAVALANDIRMAPANJURU/VANTILATIONFILTER .......................................................................................110226 PROJECEBİ(A5)/DRAWINGPOCKET(A5) ...................................................................................................111227 PROJECEBİ(A4)/DRAWINGPOCKET(A4) ...................................................................................................111717 MONOFAZESAYAÇOKUMACAMI/METERGLASS .......................................................................................112718 TRİFAZESAYAÇOKUMACAMI/METERGLASS.............................................................................................112719 TRİFAZESAYAÇCAMI/METERGLASS ...........................................................................................................113702 SAYAÇÇERÇEVESİ/METERFRAME ..............................................................................................................113225 SAYAÇÇERÇEVESİ/METERFRAME ..............................................................................................................113022 KÖŞETAKOZU(PLASTİK)/CORNERWEDGE(PLASTIC) ...............................................................................114703 GEÇMEKAPAKTUTAMAĞI(ELÇEK)/COVERPULL(SNAPIN) ....................................................................114705 PANOASKIKULAĞIPANEL/CONNECTIONELEMENT ..................................................................................114024/025 KABİNTOZFIRÇASI/CABINETDUSTBRUSH ...............................................................................................115708 KAFESSOMUNPANEL/CONNECTIONNUT ..................................................................................................115708-1 KAFESSOMUNPANEL/CONNECTIONNUT ..................................................................................................115716 KELEBEKSOMUN/BUTTERFLYNUT..............................................................................................................116.716-1 KELEBEKSOMUN/BUTTERFLYNUT..............................................................................................................116.716-2 KELEBEKSOMUN/BUTTERFLYNUT..............................................................................................................116.716-3 KELEBEKSOMUN/BUTTERFLYNUT..............................................................................................................116.707TB PLASTİKBAŞLIVİDA/PLASTICHEADSECREW ...........................................................................................117707 PLASTİKBAŞLIVİDA/PLASTICHEADSECREW ...........................................................................................117720 PLASTİKKULP/PLASTICHANDLE .................................................................................................................117720-1 PLASTİKKULP/PLASTICHANDLE .................................................................................................................117215 PLASTİKARMUTKULP/PLASTICHANDLE ...................................................................................................117213-135 PANOMAKASI/COVERSTAY ..........................................................................................................................118213-202 PANOMAKASI/COVERSTAY ..........................................................................................................................118213-290 PANOMAKASI/COVERSTAY ..........................................................................................................................118706 A2-A3-A4-A5MAKİNAKAPAKKULBU/HANDLEFORMACHINERYCOVER ............................................118109 ÇEKMECEKULBU/HANDLEFORDRAWER ...................................................................................................119706-122 MAKİNAKAPAKKULBU/HANDEFORMACHINERYCOVER ........................................................................119706-115 MAKİNAKAPAKKULBU/HANDEFORMACHINERYCOVER ........................................................................119712 VOTOMATETİKETİ/FUSELABEL...................................................................................................................120713 VOTOMATETİKETİ/FUSELABEL...................................................................................................................120714 VOTOMATETİKETİ/FUSELABEL...................................................................................................................120724 VOTOMATKAPATMAPLASTİĞİ/CLOSINGPLASTICOFVAUTOMAT .........................................................120715 VOTOMATETİKETİ(12’LİTAKIM)/FUSELABEL ..........................................................................................121IST01-02-03-04 METALETİKETLİK/IRONSHEETLABEL ........................................................................................................121709 PANOTAŞIMAHALKASI/PANELLIFTINGKIT ...............................................................................................122710 PANOTAŞIMAHALKASI/PANELLIFTINGKIT ...............................................................................................122711 PANOTAŞIMAHALKASI/PANELLIFTINGKIT ...............................................................................................122711-1 PANOTAŞIMAHALKASI/PANELLIFTINGKIT ...............................................................................................122711-2 PANOTAŞIMAHALKASI/PANELLIFTINGKIT ...............................................................................................122723 PANOMONTAJSOMUNU/WINGNUT ............................................................................................................122 PANO KAPAK CONTALARI/PANEL COVER GASGETS404-427 YAPIŞKANLICONTA/SEALINGTAPE..............................................................................................................123431-446 YAPIŞKANLICONTA/SEALINGTAPE..............................................................................................................123451-452-453 MONTAJBANTLARI/MONTAGETAPES .........................................................................................................123401-403 SACKENARFİTİLİ/PANELTAPE ....................................................................................................................123402 PANOveMAKİNAKABİNLASTİĞİ/PANELandMACHINERYCABINETGASKETING ................................124402-1 PANOveMAKİNAKABİNLASTİĞİ/PANELandMACHINERYCABINETGASKETING ................................124402-2 PANOveMAKİNAKABİNLASTİĞİ/PANELandMACHINERYCABINETGASKETING ................................124402-3 PANOveMAKİNAKABİNLASTİĞİ/PANELandMACHINERYCABINETGASKETING ................................125402-4 PANOveMAKİNAKABİNLASTİĞİ/PANELandMACHINERYCABINETGASKETING ................................125402-5 PANOveMAKİNAKABİNLASTİĞİ/PANELandMACHINERYCABINETGASKETING ................................125402-6 PANOveMAKİNAKABİNLASTİĞİ/PANELandMACHINERYCABINETGASKETING ................................126.4001-2-3 KABİNCAMLASTİĞİ/CABINETGLASSRUBBER ..........................................................................................126.

BÖLÜM/PART 7 MESNET İZOLATÖRLERİ/INSULATORS ....................................................................... 127601 MESNETİZALATÖR/INSULATOR ....................................................................................................................128602 MESNETİZALATÖR/INSULATOR ....................................................................................................................128603 MESNETİZALATÖR/INSULATOR ....................................................................................................................128604 MESNETİZALATÖR/INSULATOR ....................................................................................................................128605 MESNETİZALATÖR/INSULATOR ....................................................................................................................129606 MESNETİZALATÖR/INSULATOR ....................................................................................................................129610 MESNETİZALATÖR/INSULATOR ....................................................................................................................129611 MESNETİZALATÖR/INSULATOR ....................................................................................................................129607 TARAKİZALATÖR3x1F/INSULATOR3x1F ....................................................................................................130608 TARAKİZALATÖR3x2F/INSULATOR3x2F ....................................................................................................130609 BARASERFİLERİM8/POTHOLDERM8 .......................................................................................................131609-1 BARASERFİLERİM10/POTHOLDERM10 ...................................................................................................131612 KADEMELİİZALATÖR/INSULATOR ................................................................................................................131613 MESNETİZALATÖR(M6)/INSULATOR(M6-h:25) ....................................................................................132614 MESNETİZALATÖR(M6)/INSULATOR(M6-h:30) ....................................................................................132615 MESNETİZALATÖR(M6)/INSULATOR(M6-h:35) ....................................................................................132616 MESNETİZALATÖR(M8)/INSULATOR(M8-h:45) ....................................................................................133617 MESNETİZALATÖR(M10)/INSULATOR(M10-h:50) ................................................................................133618 MESNETİZALATÖR(M10)/INSULATOR(M10-h:60) ................................................................................133

KOD/CODE ÜRÜNADI/PRODUCTNAME........................................................................................................ SAYFANO/PAGENO KOD/CODE ÜRÜNADI/PRODUCTNAME........................................................................................................ SAYFANO/PAGENO

SERTİFİKALARIMIZ / CERTIFICATES

Documents

Oskar Katalog Ic 2012 Web Icin Mini