Upload
bhoypacho
View
232
Download
3
Embed Size (px)
DESCRIPTION
Piping 2
Citation preview
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 2 of 43 Rev 0
SCOPE
1) This Project Design Specification (PDS) contains the Line Class 300 tables that accompany PG-PDS 03-01-01. Additional valve information is contained in PG-PDS 03-20-10.
2) This Project Design Specification (PDS) covers the basic requirements for the design of piping systems for onshore production and processing facilities covered by ASME B31.3.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 3 of 43 Rev 0
TABLE OF CONTENTS
1. REQUIRED REFERENCES.................................................................................... 4
1.1. Project Design Specifications ....................................................................... 4
1.2. API – American Petroleum Institute.............................................................. 4
1.3. ASME – American Society of Mechanical Engineers ................................... 4
1.4. ASTM – American Society for Testing and Materials ................................... 5
1.5. MSS – Manufacturers Standardization Society ............................................ 6
1.6. Calculations.................................................................................................. 6
2. CLASSIFICATION SHEETS................................................................................... 7
2.1. Class 300: Carbon Steel (Sweet Service) B1E............................................. 7
2.2 Class 300: LT Carbon Steel (Sweet Service) B5E ..................................... 18
2.2 Class 300: Stainless Steel–Process Piping B11A ...................................... 29
2.3 Class 300: Stainless Steel–Process Piping B11A(X).................................. 37
APPENDIX: NOTES TO PIPING LINE CLASS 300 ..................................................... 41
ATTACHMENT: PURPOSE CODE DEFINITIONS...................................................... 42
RECORD OF CHANGE ................................................................................................ 43
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 4 of 43 Rev 0
1. REQUIRED REFERENCES
1) This Section lists the Practices, codes, standards, specifications, and publications that shall be used with this document. Unless otherwise specified herein, use the latest edition.
2) The text of the numbered "Notes" referenced in the classification sheets is found in the Appendix of PG-PDS 03-01-01. A dagger (†) is used to identify such notes in this PDS.
1.1. Project Design Specifications
PGHU-EH-LSPDS-000101 PG-PDS 03-01-01 Upstream Piping Component Selection and System Design
PGHU-EH-LSPDS-002010 PG-PDS 03-20-10 Upstream Piping Classifications – Valve Indices and Descriptions
PGHU-EH-LSPDS-001902 PG-PDS 03-19-02 Upstream Piping Fabrication, Erection, Inspection, Testing, and Cleaning
1.2. API – American Petroleum Institute
API SPEC 5L Specification for Line Pipe
API SPEC 6D Petroleum and Natural Gas Industries – Pipeline Transportation Systems – Pipeline Valves
API STD 594 Check Valves: Wafer, Wafer-Lug, and Double-flanged Type
API STD 600 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries
API STD 602 Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries
API STD 609 Butterfly Valves: Double-Flanged, Lug-, and Wafer-Type
1.3. ASME – American Society of Mechanical Engineers
ASME B16.5 Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24 Metric/Inch Standard
ASME B16.9 Factory-Made Wrought Buttwelding Fittings
ASME B16.11 Forged Fittings, Socket-Welding and Threaded
ASME B16.20 Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed
ASME B16.34 Valves – Flanged, Threaded, and Welding End
ASME B16.36 Orifice Flanges
ASME B16.47 Large-Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard
ASME B16.48 Line Blanks
ASME B18.2.1 Square and Hex Bolts and Screws (Inch Series)
ASME B18.2.2 Square and Hex Nuts (Inch Series)
ASME B31.3 Process Piping
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 5 of 43 Rev 0
ASME B36.10M Welded and Seamless Wrought Steel Pipe
ASME B36.19M Stainless Steel Pipe
1.4. ASTM – American Society for Testing and Materials
ASTM A 105/A 105M Standard Specification for Carbon Steel Forgings for Piping Applications
ASTM A 106/A 106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
ASTM A 182/A 182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A 193/A 193M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A 194/A 194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
ASTM A 216/A 216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
ASTM A 234/A 234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
ASTM A 240/A 240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A 312/A 312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A 320/A 320M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
ASTM A 333/A 333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
ASTM A 350/A 350M Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
ASTM A 351/A 351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
ASTM A 352/A 352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
ASTM A 358/A 358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
ASTM A 403/A 403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASTM A 420/A 420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
ASTM A 516/A 516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
ASTM A 671 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 6 of 43 Rev 0
1.5. MSS – Manufacturers Standardization Society
MSS SP-97 Integrally Reinforced Forged Branch Outlet Fittings – Socket Welding, Threaded, and Buttwelding Ends
1.6. Calculations
PGHU-CV-LCCAL-000001
Pipe Wall Thickness Calculations
PGHU-CV-LCCAL-000002
Blank Thickness Calculations
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 7 of 43 Rev 0
2. CLASSIFICATION SHEETS
The text of the numbered "Notes" referenced in the classification sheets is found in the Appendix of PG-PDS 03-01-01. A dagger (†) is used to identify such notes in this PDS.
2.1. Class 300: Carbon Steel (Sweet Service) B1E
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Service General process, hydrocarbons, glycol, chemicals, produced water, closed drains, steam
Pipe Material Carbon steel
Corrosion Allowance 3.00mm
Valve Material Carbon steel
Valve Trim 13 Cr, except ball valves have 316 SS balls
ASME Pressure Class 300
Design Code ASME B31.3
PWHT Not required, except for wall thickness greater than 19 mm (¾ in.)
Pressure/Temperature Limits
(See Note 6†)
Limits based upon flange ratings, unless noted otherwise
(C) (kPa-g) (F) (psig)
−29 to +38 5102 −20 to +100 740
93 4688 200 680
149 4516 300 655
177 4445 350 645
204 4378 400 635
Limits based upon A105 flange ratings, unless noted otherwise.
(*) Reference to PG-PDS 03-01-01, Appendix E, Note 6, Clause g), Temperature Range Restrictions for Elastomers in this Line Class are indicated below the valve ID No.
310 3950 590 573
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
Ball Valves API SPEC 6D or ASME B16.34
NPS ½ – 1½, Class 800, SW, reduced bore, 316 SS ball/trim, PTFE seats, fire-safe design NPS ½ –1½, Class 800, SW x SE, ditto
ASTM A 105/A 105M ASTM A 105/A 105M
YBAA5 YBAA7
2, 3, 6, 7, 9, 11, 21, 28, 30
Ball Valves API SPEC 6D
NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BBAA0(02) (177°C)* BBAA0(02) (177°C)*
2, 3, 6, 7, 8, 9, 11, 20, 21, 28
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 8 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE with cavity bleed valve FBAA9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE seats, other seals – HNBR, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – HNBR, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim , main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE, 316 SS ball and trim, main seats – metal seats, other seals – Viton, liquid and mixed phase service, fire-safe design
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BBAA0(01) (177°C)* BBAA0(12) (150°C)* BBAA0(12) (150°C)* BBAA0(32) (177°C)* BBAA0(32) (177°C)* BBAA0(02)-(M) (177°C)* BBAA0(02)-(M) (177°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 9 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAA9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, fire-safe design
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BBFA0(02) (177°C)* BBFA0(02) (177°C)* BBFA0(01) (177°C)* BBFA0(32) (177°C)* BBFA0(32) (177°C)* BBFA0(32)-(M) (177°C)* BBFA0(32)-(M) (177°C)* BBFA0(02)-(M) (177°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 10 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE, 316 SS ball and trim, main seats – metal seats, other seals – Viton, liquid and mixed phase service, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAA9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, with weld overlay, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BBFA0(02)-(M) (177°C)* BBAA0(31) (177°C)* BBAA0(21) (204°C)* BBAA0(21)-(31) (204°C)* BBAA0(22) (204°C)* BBAA0(22) (204°C)* BBAA0(22)-(32) (204°C)* BBAA0(22)-(32) (204°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 11 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, with weld overlay, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAA9, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats -
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BBAA0(22)-(32)-(M) (204°C)* BBAA0(22)-(32)-(M) (204°C)* BBAA0(22)-(M) (204°C)* BBAA0(22)-(M) (204°C)* BBFA0(21) (204°C)* BBFA0(21)-(31) (204°C)* BBFA0(31) (177°C)* BBFA0(22) (204°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 12 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - Metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – Metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - Metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – Metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BBFA0(22) (204°C)* BBFA0(22)-(32) (204°C)* BBFA0(22)-(32) (204°C)* BBFA0(22)-(32)-(M) (204°C)* BBFA0(22)-(32)-(M) (204°C)* BBFA0(22)-(M) (204°C)* BBFA0(22)-(M) (204°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 13 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - Metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - Metal seats, other seals – Viton, with weld overlay, fire-safe design
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BBAA0(32)-(M) (177°C)* BBAA0(32)-(M) (177°C)*
Ball Valves (optional for clean service only) API SPEC 6D
NPS 6 – 36, Class 300, RF, reduced bore, ASTM A 105/A 105M ENP-plated ball/seat pockets and body-stem seal area, nylon seats, other seals-Viton fire-safe design NPS 6–36, Class 300, RF, full bore, ditto
ASTM A 105/A 105M or ASTM A 216/A 216M WCB ASTM A 105/A 105M or ASTM A 216/A 216M WCB
BBAA0(P) (177°C)* BBFA0(P) (177°C)*
2, 3, 6, 7, 8, 11, 17, 20, 21, 28
Check Valves API STD 602
NPS ½ – 1½, Class 800, SW, BC, API trim 8 (13 Cr), swing-type, integral HF seat NPS 1 – 2, Class 300, RF, integral flgs, ditto NPS ¾ – 1½, Class 800, SW, BC, API trim 8 (13 Cr), piston-type, integral HF seat NPS 1 – 2, Class 300, RF, integral flgs, ditto
ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M
YCAA5 BCAA0 YCNA5 BCNA0
25, 27
Check Valves API STD 594
NPS 3 – 10, Class 300, RF, retainerless dual plates, through-drilled solid lugs, integral metal seat, Inconel springs, CS plates and 316 SS pins NPS 12 – 24, Class 300, RF, retainerless dual plates, double-flanged, integral metal seat, Inconel springs, CS plates and 316 SS pins
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BCYA0 BCYA0
23, 24, 25
Check Valves API SPEC 6D
NPS 2 – 24, Class 300, RF, BC, swing-type (piggable), 13 Cr Trim, HF seat
ASTM A 216/A 216M WCB
BCFA0 8, 25, 26
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 14 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
Check Valves API STD 600
NPS 2, Class 300, RF, BC, swing-type (non-piggable), Trim 8, integral HF seat
ASTM A 216/A 216M WCB
BCAA0 25, 26, 29
Globe Valves API STD 602
NPS ¾ – 1½, Class 800, SW, BB, OS&Y, T-Body, API trim 8 (13 Cr), graphitic packing NPS 1 – 2, Class 300, RF, integral flgs, ditto
ASTM A 105/A 105M ASTM A 105/A 105M
YTAA5 BTAA0
28
Globe Valves API STD 600
NPS 2 – 12, Class 300, RF, BB, OS&Y, T-Body, API trim 8 (13 Cr), graphitic packing
ASTM A 216/A 216M WCB
BTAA0 3, 28, 29
Butterfly Valves API STD 609
NPS 10, Class 300, RF, through-drilled lugs, CS disc, 316 SS seal ring, CS body, graphitic packing NPS 12-24, Class 300, RF, double-flanged, CS disc, 316 SS seal ring, CS body, graphitic packing
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BFAA0 BFAA0
2, 3, 7, 8, 11, 28
Gate Valves API STD 602
NPS ¾ – 1½, Class 800, SW, BB, OS&Y, API trim 8 (13 Cr), standard port, graphitic packing NPS ¾ -1, Class 800, SW x SE, BB, OS&Y, API trim 8 (13 Cr), standard port, graphitic packing NPS 1 – 2, Class 300, RF, integral flgs, ditto
ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M
YGAA5 YGAA7 BGAA0
22, 28
Gate Valves API STD 600
NPS 2 – 4, Class 300, RF, BB, OS&Y, solid wedge, integral flange, API trim 8 (13 Cr), standard port, graphitic packing NPS 6-24, Class 300, RF, BB, OS&Y, flexible wedge with cavity relief, integral flange, API trim 8 (13 Cr), standard port, graphitic packing
ASTM A 216/A 216M WCB ASTM A 216/A 216M WCB
BGAA0 BGAA0
3, 22, 28, 29
Gate Valves API SPEC 6D
NPS 2 – 24, Class 300, RF, BB, OS&Y, Through-conduit slab gate, floating HF seats
ASTM A 216/A 216M WCB
BGFA0 3, 8, 22, 28, 29
Instrument Connection Valves
NPS ½ – 2, applies to the first-block valve (or double-block valve where required). See Note 4 for additional requirements and information.
4
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 15 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
Instrument Double Isolation Valves (Monoblok) Manufacturer’s standard
NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, fire-safe design NPS 2, Class 300, RF, single body with two obturators and a bleed, standard bore, DN 50 body, CS body, Metal Seats, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, metal seats, fire-safe design NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, metal seats, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, CS body, metal seats, fire-safe design
ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M ASTM A 105/A 105M
BSAA10 BSAA10(04) BSAA0(M) BSAA10(04)-(M) BSAA10(M) BSAA10(06) BSAA10(06)-(M)
2, 3, 4, 30
† See the Appendix of PG-PDS 03-01-01 for text of numbered Notes.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 16 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Component/ Standard Description ASTM Specifications Notes†
Bolting ASME B18.2.1 and ASME B18.2.2
Stud bolts Heavy, semi-finished, hex nuts
ASTM A 193/A 193M B7, ASTM A 194/A 194M 2H
80
Flanges ASME B16.5
NPS ½ – 1½, Class 300, RF, SW NPS 2 – 24, Class 300, RF, WN, bore to match pipe
ASTM A 105/A 105M 86
Orifice Flanges ASME B16.36
NPS 2–24, Class 300, RF, WN, bore to match pipe
ASTM A 105/A 105M 86
Gaskets ASME B16.20
Class 300, spiral wound, CS centering ring, 304 SS windings, flexible graphite filler, inner ring for all sizes
60
Fittings ASME B16.11
NPS ½ – 1½, SW, Sch. 160 and lighter–Class 3000, Sch. XXS and heavier–Class 6000
ASTM A 105/A 105M 53, 54, 62, 86
Fittings ASME B16.9
NPS 2 –16, SMLS, BW, same thickness as pipe NPS 18-24, BW, WELDED
ASTM A 234/A 234M WPB ASTM A420/A420M WPL6
55, 56
Branch Outlet: MSS SP-97
NPS ½ – 1½, sockolet, SW outlet, Class 3000 for Sch. 160 and lighter, Class 6000 for Sch. XXS NPS 2 – 6, weldolet, BW outlet to match branch wall
ASTM A 105/A 105M 53, 62, 86
Pipe ASME B36.10M
NPS ½ – 16, seamless, thickness (see below) NPS 18 – 24, EFW, Class 22, Normalized, (Impact tested for -29°C (-20°F) service, for pipe Thk > 31.8mm)
ASTM A 106/A 106M B ASTM A671 CC65-S2
51, 52, 53, 54, 63
Spectacle Blind / Paddle Blank / Spacers ASME B16.48
NPS 1-24, RF, Class 300 Impact test for -29°C service for Thk > 31.8mm
ASTM A516 Gr. 65, Normalized (Refer Table 4 PG-PDS 03-01-01 for the type)
† See the Appendix of PG-PDS 03-01-01 for text of numbered Notes.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 17 of 43 Rev 0
Class 300 – Carbon Steel (Sweet Service) B1E Classification Sheet
Corrosion Allowance (C.A.) (see Appendix Note 87)
E C.A. = 3.0 mm (0.12 in.)
NPS Sch.
½ XXS
¾ – 2 160
3 – 6 80
8 – 24 40
Class 300—Carbon Steel (Sweet Service) B1E Classification Sheet
Branch Table
24 BWT
20 BRT BWT
18 BRT BRT BWT
16 RB BRT BRT BWT
14 RB RB BRT BRT BWT
12 RB RB RB BRT BRT BWT
10 RB RB RB RB BRT BRT BWT
8 RB RB RB RB RB BRT BRT BWT
6 WOL WOL WOL WOL WOL WOL BRT BRT BWT
4 WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT
3 WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT
2 WOL WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT
1½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL BRT SWT
1 SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SWT
¾ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SWT
B
R
A
N
C
H
S
I
Z
E
S
N
P
S ½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SRT SWT
24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½
H E A D E R S I Z E S – N P S
Legend:
SOL = Socket Weld O-let Fitting SRT = Socket Weld Reducing Tee RB = Reinforced Branch
SWT = Socket Weld Tee WOL = Buttweld O-let Fitting
BRT = Buttweld Reducing Tee BWT = Buttweld Tee
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 18 of 43 Rev 0
2.2 Class 300: LT Carbon Steel (Sweet Service) B5E
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Service General process, hydrocarbons, glycol
Pipe Material Impact-tested carbon steel (for low temperature service)
Corrosion Allowance 3.00mm
Valve Material Carbon steel
Valve Trim 13 Cr, except ball valves have 316 SS balls (See note above)
ASME Pressure Class 300
Design Code ASME B31.3
PWHT Yes, except for conditions specified elsewhere in project specifications
Limits based upon flange ratings, unless noted otherwise
(C) (kPa-g) (F) (psig)
−46 to +38 4791 −50 to +100 695
93 4550 200 660
149 4412 300 640
177 4324 350 627
204 4240 400 615
Pressure/Temperature Limits
(See Note 6†)
Limits based upon A352 LCB flange ratings, unless noted otherwise.
(*) Reference to PG-PDS 03-01-01, Appendix E, Note 6, Clause g), Temperature Range Restrictions for Elastomers in this Line Class are indicated below the valve ID No.
310 3812 590 553
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
Ball Valves API SPEC 6D or ASME B16.34
NPS ½ – 1½, Class 800, SW, reduced bore, 316 SS ball/trim, PTFE seats, fire-safe design NPS ½ –1½, Class 800, SW x SE, ditto
ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1
YBAB5 YBAB7
2, 3, 5, 6, 7, 9, 11, 21, 28, 30
Ball Valves API SPEC 6D
NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE with cavity
ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB
BBAB0(02) (177°C)* BBAB0(02) (177°C)* BBAB0(01) (177°C)*
2, 3, 5, 6, 7, 8, 9 11, 20, 21, 28
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 19 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
bleed valve FBAB9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE seats, other seals – HNBR, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – HNBR, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim , main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE, 316 SS ball and trim, main seats – metal seats, other seals – Viton, liquid and mixed phase service, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed
ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB
BBFB0(12) (150°C)* BBFB0(12) (150°C)* BBAB0(32) (177°C)* BBAB0(32) (177°C)* BBAB0(02)-(M) (177°C)* BBAB0(02)-(M) (177°C)* BBFB0(02) (177°C)* BBFB0(02) (177°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 20 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAB9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats – metal seats, other seals – Viton, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE, 316 SS ball and trim, main seats – metal seats, other seals – Viton, liquid and mixed phase service, fire-safe design
ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB
BBFB0(01) (177°C)* BBFB0(32) (177°C)* BBFB0(32) (177°C)* BBFB0(32)-(M) (177°C)* BBFB0(32)-(M) (177°C)* BBFB0(02)-(M) (177°C)* BBFB0(02)-(M) (177°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 21 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAB9, 316 SS ball and trim, main seats – RPTFE, other seals – Viton, gas service only, with weld overlay, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design
NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, with weld
ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB
BBAB0(31) (177°C)* BBAB0(21) (204°C)* BBAB0(21)-(31) (204°C)* BBAB0(22) (204°C)* BBAB0(22) (204°C)* BBAB0(22)-(32) (204°C)* BBAB0(22)-(32) (204°C)* BBAB0(22)-(32)-(M) (204°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 22 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
overlay, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, with weld overlay, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAB9, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Viton, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design
ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB
BBAB0(22)-(32)-(M) (204°C)* BBAB0(22)-(M) (204°C)* BBAB0(22)-(M) (204°C)* BBFB0(21) (204°C)* BBFB0(21)-(31) (204°C)* BBFB0(31) (177°C)* BBFB0(22) (204°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 23 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - Metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – Metal seats, other seals – Lip seals, liquid and mixed phase service, with weld overlay, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - Metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – Metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design
ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB
BBFB0(22) (204°C)* BBFB0(22)-(32) (204°C)* BBFB0(22)-(32) (204°C)* BBFB0(22)-(32)-(M) (204°C)* BBFB0(22)-(32)-(M) (204°C)* BBFB0(22)-(M) (204°C)* BBFB0(22)-(M) (204°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 24 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
Ball Valves (optional for clean service only) API SPEC 6D
NPS 6 – 36, Class 300, RF, reduced bore, ASTM A 350/A 350M LF2 Class 1 ENP-plated ball/seat pockets and body-stem seal area, nylon seats, other seals-Viton fire-safe design NPS 6 – 36, Class 300, RF, full bore, ditto
ASTM A 350/A 350M LF2 Class 1 or ASTM A 352/A 352M LCB ASTM A 350/A 350M LF2 Class 1 or ASTM A 352/A 352M LCB
BBAB0(P) (177°C)* BBFB0(P) (177°C)*
2, 3, 5, 6, 7, 8, 11, 17, 20, 21, 28
Check Valves API STD 602
NPS ½ – 1½, Class 800, SW, BC, API trim 8 (13 Cr), swing-type, integral HF seat NPS 1 – 2, Class 300, RF, integral flgs, ditto NPS ¾ – 1½, Class 800, SW, BC, API trim 8 (13 Cr), piston-type, integral HF seat NPS 1 – 2, Class 300, RF, integral flgs, ditto
ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1
YCAB5 BCAB0 YCNB5 BCNB0
5, 25, 27
Check Valves API STD 594
NPS 3 – 10, Class 300, RF, retainerless dual plates, through-drilled solid lugs, integral metal seat, Inconel springs, CS plates and 316 SS pins NPS 12 – 24, Class 300, RF, retainerless dual plates, double-flanged, integral metal seat, Inconel springs, CS plates and 316 SS pins
ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB
BCYB0 BCYB0
5, 8, 23, 24, 25
Check Valves API SPEC 6D
NPS 2 – 24, Class 300, RF, BC, swing-type (piggable), 13 Cr Trim, HF seat
ASTM A 352/A 352M LCB
BCFB0 5, 8, 25, 26
Check Valves API STD 600
NPS 2, Class 300, RF, BC, swing-type (non-piggable), Trim 8, integral HF seat
ASTM A 352/A 352M LCB
BCAB0 5, 8, 25, 26, 29
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 25 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
Globe Valves API STD 602
NPS ¾ – 1½, Class 800, SW, BB, OS&Y, T-Body, API trim 8 (13 Cr), graphitic packing NPS 1 – 2, Class 300, RF, integral flgs, ditto
ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1
YTAB5 BTAB0
5, 28
Globe Valves API STD 600
NPS 2 – 8, Class 300, RF, BB, OS&Y, T-Body, API trim 8 (13 Cr), graphitic packing
ASTM A 350/A 350M LF2 Class 1
BTAB0 3, 5, 28, 29
Butterfly Valves API STD 609
NPS 10, Class 300, RF, through-drilled lugs, CS disc, 316 SS seal ring, LTCS body, graphitic packing NPS 12-24, Class 300, RF, double-flanged, CS disc, 316 SS seal ring, LTCS body, graphitic packing
ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB
BFAB0 BFAB0
2, 3, 5, 7, 8, 11, 28
Gate Valves API STD 602
NPS ¾ – 1½, Class 800, SW, BB, OS&Y, solid wedge, API trim 8 (13 Cr), standard port, graphitic packing NPS 1 – 2, Class 300, RF flgs, ditto NPS ¾ -1, Class 800, SW x SE, BB, OS&Y, solid wedge, API trim 8 (13 Cr), standard port, graphitic packing
ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1
YGAB5 BGAB0 YGAB7
3, 5, 22, 28
Gate Valves API STD 600
NPS 2 – 4, Class 300, RF, BB, OS&Y, solid wedge, integral flange, API trim 8 (13 Cr), standard port, graphitic packing NPS 6-24, Class 300, RF, BB, OS&Y, flexible wedge with cavity relief, integral flange, API trim 8 (13 Cr), standard port, graphitic packing
ASTM A 352/A 352M LCB ASTM A 352/A 352M LCB
BGAB0 BGAB0
3, 5, 8, 22, 28, 29
Instrument Connection Valves
NPS ½ – 2, applies to the first-block valve (or double-block valve where required). See Note 4 for additional requirements and information.
4
Instrument Double Isolation Valves (Monoblok) Manufacturer’s standard
NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, fire-safe design
ASTM A 350/A 350M LF2 Class 1
BSAB10
2, 3, 4, 5, 30
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 26 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Valves Description ASTM Specifications
ID No. Notes†
NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, fire-safe design NPS 2, Class 300, RF, single body with two obturators and a bleed, standard bore, DN 50 body, LTCS body, Metal Seats, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, metal seats, fire-safe design NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, metal seats, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, LTCS body, metal seats, fire-safe design
ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1 ASTM A 350/A 350M LF2 Class 1
BSAB10(04) BSAB0(M) BSAB10(04)-(M) BSAB10(M) BSAB10(06)
BSAB10(06)-(M)
† See the Appendix of PG-PDS 03-01-01 for text of numbered Notes.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 27 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Component/ Standard Description ASTM Specifications Notes†
Bolting ASME B18.2.1 and ASME B18.2.2
Stud bolts Heavy, semi-finished, hex nuts
ASTM A 320/A 320M L7 ASTM A 194/A 194M 4L
80
Flanges ASME B16.5
NPS ½ – 1½, Class 300, RF, SW NPS 2 – 24, Class 300, RF, WN, bore to match pipe
ASTM A 350/A 350M LF2 Class 1
Orifice Flanges ASME B16.36
NPS 2 – 24, Class 300, RF, WN, bore to match pipe
ASTM A 350/A 350M LF2 Class 1
Gaskets ASME B16.20
Class 300, spiral wound, CS centering ring, 304SS windings, flexible graphite filler, inner ring for all sizes
60
Fittings ASME B16.11
NPS ½ – 1½, SW, Sch. 160 and lighter–Class 3000 Sch. XXS and heavier–Class 6000
ASTM A 350/A 350M LF2 Class 1
53, 54, 62
Fittings ASME B16.9
NPS 2 –16 , BW, SMLS, same thickness as pipe NPS 18-24, BW, Welded
ASTM A 420/A 420M WPL6
55, 56
Branch Outlet Fittings (O-lets) MSS SP-97
NPS ½ – 1½, branch outlet fitting, SW outlet, Class 3000 for Sch. 160 and lighter, Class 6000 for Sch. XXS NPS 2 – 6, branch outlet fitting, BW outlet to match branch wall
ASTM A 350/A 350M LF2 Class 1
53, 62
Pipe ASME B36.10M
NPS ½ –16, seamless, thickness (see below) NPS18-24, EFW, Class 22, normalized (impact tested for–46C (–50F) service, for pipe Thk > 14.3mm)
ASTM A 333/A 333M Gr. 6 ASTM A 671 CC65-S2
51, 52, 53, 54, 63
Spectacle Blind / Paddle Blank / Spacer ASME B16.48
NPS 1-24, RF, Class 300, Impact test for -46°C service for Thk > 14.3mm
ASTM A516 Gr. 65, Normalized (Refer Table 4 PG-PDS 03-01-01 for the type)
† See the Appendix of PG-PDS 03-01-01 for text of numbered Notes.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 28 of 43 Rev 0
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Corrosion Allowance (C.A.) (see Appendix Note 87)
E C.A. = 3.0 mm (0.12 in.)
NPS Sch.
½ XXS
¾ – 2 160
3 – 6 80
8 – 24 40
Class 300 – LT Carbon Steel (Sweet Service) B5E Classification Sheet
Branch Table
24 BWT
20 BRT BWT
18 BRT BRT BWT
16 RB BRT BRT BWT
14 RB RB BRT BRT BWT
12 RB RB RB BRT BRT BWT
10 RB RB RB RB BRT BRT BWT
8 RB RB RB RB RB BRT BRT BWT
6 WOL WOL WOL WOL WOL WOL BRT BRT BWT
4 WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT
3 WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT
2 WOL WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT
1½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL BRT SWT
1 SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SWT
¾ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SWT
B
R
A
N
C
H
S
I
Z
E
S
N
P
S ½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SRT SWT
24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½
H E A D E R S I Z E S – N P S
Legend:
BWT = Buttweld Tee BRT = Buttweld Reducing Tee
SOL = Socket Weld O-let Fitting SWT = Socket Weld Tee
SRT = Socket Weld Reducing Tee WOL = Buttweld O-let Fitting
RB = Reinforced Branch
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 29 of 43 Rev 0
2.2 Class 300: Stainless Steel–Process Piping B11A
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Service Corrosive hydrocarbons, chemicals, glycol, produced water, amines
Pipe Material 316L stainless steel
Corrosion Allowance 0mm
Valve Material 316L stainless steel (flanged), 316L stainless (SW, BW)
Valve Material 316 or 316L stainless steel for flanged valves
Valve Trim 316 stainless steel
ASME Pressure Class 300
Design Code ASME B31.3
PWHT No
Limits based upon flange ratings, unless noted otherwise
(C) (kPa-g) (F) (psig)
−101 to 38 4136 −150 to +100 600
93 3516 200 510
149 3137 300 455
177 3013 350 437
204 2895 400 420
270 2688 518 390
Pressure/Temperature Limits
(See Notes 6† & 33†)
Limits based upon 316L flange ratings, unless noted otherwise.
(*) Reference to PG-PDS 03-01-01, Appendix E, Note 6, Clause g), Temperature Range Restrictions for Elastomers in this Line Class are indicated below the valve ID No.
For blow-down scenario (short term condition), elastomer – Viton and HNBR are suitable to -70°C. 310 2586 590 375
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Valves Description ASTM
Specifications ID No. Notes
†
Ball Valves API SPEC 6D or ASME B16.34
NPS ½ – 1½, Class 800, SW, reduced bore, 316 SS ball/trim, reinforced PTFE seats, fire-safe design NPS ½ – 1½, Class 800, SW x SE, ditto NPS 1 – 1½, Class 300, RF, ditto
ASTM A 182/A 182M F316L ASTM A 182/A 182M F316L ASTM A 182/A 182M F316
YBAK5 YBAK7 BBAJ0
2, 3, 6, 7, 9, 11, 21, 29, 30, 33, 58
Ball Valves API SPEC 6D
NPS 2–8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE , other seals – Viton, fire-safe design
ASTM A 351/A 351M CF8M
BBAJ0(02) (-50°C to 177°C)*
2, 3, 6, 7, 8, 9, 11, 20, 21, 28, 33, 58
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 30 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Valves Description ASTM
Specifications ID No. Notes
†
NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE with cavity bleed valve FBAK9, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - metal seats, other seals – Viton, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - metal seats, other seals – Viton, fire-safe design NPS 2–6, Class 300, RF, full bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, fire-safe design NPS 8-24, Class 300, RF, full bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, fire-safe design NPS 2-24, Class 300, RF, full bore, trunnion mounted, DPE x DPE seat with cavity bleed valve FBAK9, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2–8, Class 300, RF, reduced bore, floating ball, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE , other seals – HNBR, fire-safe design
ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M
BBAJ0(02) (-50°C to 177°C)* BBAJ0(01) (-50°C to 177°C)* BBAJ0(02)-(M) (-50°C to 177°C)* BBAJ0(02)-(M) (-50°C to 177°C)* BBFJ0(02) (-50°C to 177°C)* BBFJ0(02) (-50°C to 177°C)* BBFJ0(01) (-50°C to 177°C)* BBAJ0(12) (-50°C to 150°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 31 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Valves Description ASTM
Specifications ID No. Notes
†
NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x DPE seat, liquid and mixed phase service, 316 SS ball and trim, main seats - RPTFE, other seals – HNBR, fire-safe design NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats - RPTFE, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-8, Class 300, RF, reduced bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 10-24, Class 300, RF, reduced bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, gas service only, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seal, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - RPTFE seats, other seals – Lip seals,
ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M
BBAJ0(12) (-50°C to 150°C)* BBAJ0(21) (204°C)* BBAJ0(22) (204°C)* BBAJ0(22) (204°C)* BBAJ0(22)-(M) (204°C)* BBAJ0(22)-(M) (204°C)* BBFJ0(21) (204°C)* BBFJ0(22) (204°C)*
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 32 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Valves Description ASTM
Specifications ID No. Notes
†
liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – RPTFE seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 2-6, Class 300, RF, Full bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design NPS 8-24, Class 300, RF, Full bore, trunnion mounted, SR x SR seat, 316 SS ball and trim, main seats – metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design
ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M
BBFJ0(22) (204°C)* BBFJ0(22)-(M) (204°C)* BBFJ0(22)-(M) (204°C)*
Check Valves API STD 602
NPS ½ – 1½, Class 800, SW, BC, API trim 12 (316 SS), swing-type, integral HF seat NPS ¾ – 1½, Class 800, SW, BC, API trim 12 (316 SS), piston-type, integral HF seat
ASTM A 182/A 182M F316L ASTM A 182/A 182M F316L
YCAK5 YCNK5
25, 27, 58
Check Valves API STD 594
NPS 3– 10, Class 300, RF, retainerless dual plates, through-drilled solid lugs, integral metal seat, Inconel springs, 316 SS plates and pins NPS 12 – 24, Class 300, RF, retainerless dual plates, double-flanged, integral metal seat, Inconel springs, 316 SS plates and pins
ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M
BCYJ0 BCYJ0
23, 24, 25, 58
Check Valves API SPEC 6D
NPS 2 – 24, Class 300, RF, BC, swing-type (piggable), 316 SS trim, HF seat
ASTM A 351/A 351M CF8M
BCFJ0 8, 25, 26, 58
Check Valves ASME B16.34
NPS 2, Class 300, RF, BC, swing-type (non-piggable), API trim 12 (316 SS), integral HF seat
ASTM A 351/A 351M CF8M
BCAJ0
25, 26, 29, 58
Globe Valves API STD 602
NPS ¾ – 1½, Class 800, SW, BB, OS&Y, T-Body, API trim 12 (316 SS), graphitic packing NPS 1 – 2, Class 300, RF, integral flgs, ditto
ASTM A 182/A 182M F316L ASTM A 182/A 182M F316
YTAK5 BTAJ0
33, 58
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 33 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Valves Description ASTM
Specifications ID No. Notes
†
Globe Valves ASME B16.34
NPS 2 – 8, Class 300, RF, BB, OS&Y, T-Body, API trim 12 (316 SS), graphitic packing
ASTM A 351/A 351M CF8M
BTAJ0 3, 28, 29, 33, 58
Butterfly Valves API STD 609
NPS 10, Class 300, RF, through-drilled lugs, 316 SS disc, 316 SS seal ring, 316 SS body, graphitic packing NPS 12-24, Class 300, RF, double-flanged, 316 SS disc, 316 SS seal ring, 316 SS body, graphitic packing
ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M
BFAJ0 BFAJ0
2, 3, 7, 8, 11, 28, 33, 58
Gate Valves API STD 602
NPS ¾ – 1½, Class 800, SW, BB, OS&Y, solid wedge, API trim 12 (316 SS), standard port, graphitic packing NPS ¾ -1, Class 800, SW x SE, BB, OS&Y, solid wedge, API trim 12 (316 SS), standard port, graphitic packing, integral flange NPS 1 – 2, Class 300, RF, integral flgs, ditto
ASTM A 182/A 182M F316L ASTM A 182/A 182M F316L ASTM A 182/A 182M F316
YGAK5 YGAK7 BGAJ0
3, 22, 28, 33, 58
Gate Valves ASME B16.34
NPS 2 – 4, Class 300, RF, BB, OS&Y, solid wedge, integral flange, API trim 12 (316 SS), standard port, graphitic packing NPS 6-24, Class 300, RF, BB, OS&Y, flexible wedge with cavity relief, integral flange, API trim 12 (316 SS), standard port, graphitic packing
ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M
BGAJ0 BGAJ0
3, 8, 22, 28, 29, 33, 58
Instrument Connection Valves
NPS ½ – 2, applies to the first-block valve (or double-block valve where required). See Note 4 for additional requirements and information.
4
Instrument Double Isolation Valves (Monoblok) Manufacturer’s standard
NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, 316 SS body, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, 316 SS body, fire-safe design NPS 2, Class 300, RF, single body with
ASTM A 182/A 182M F316 ASTM A 182/A 182M F316 ASTM A 182/A
BSAJ10 BSAJ10(04) BSAJ0(M)
2, 3, 4, 30
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 34 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Valves Description ASTM
Specifications ID No. Notes
†
two obturators and a bleed, standard bore, DN 50 body, SS316 body, Metal Seats, fire-safe design NPS 2, Class 300, 2” RF x ¾” FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, SS316 body, metal seats, fire-safe design
NPS 2, Class 300, 2” RF x 1” i-Flange, single body with two obturators and a bleed, standard bore, DN 20 body, SS316 body, metal seats, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, SS body, fire-safe design NPS 3/4, Class 300, ½” PE x ¾ FNPT, single body with two obturators and a bleed, standard bore, DN 20 body, SS body, metal seats, fire-safe design
182M F316 ASTM A 182/A 182M F316 ASTM A 182/A 182M F316 ASTM A 182/A 182M F316L ASTM A 182/A 182M F316L
BSAJ10(04)-(M) BSAJ10(M) BSAK10(06) BSAK10(06)-(M)
† See the Appendix of PG-PDS 03-01-01 for text of numbered Notes.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 35 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Component/ Standard Description ASTM Specifications Notes†
Bolting ASME B18.2.1 and ASME B18.2.2
Stud bolts Heavy, semi-finished, hex nuts
ASTM A 320/A 320M Gr. L7 ASTM A194/A194M Gr. 4L
80
Flanges ASME B16.5
NPS 1 – 1½, Class 300, RF, SW NPS 2 – 24, Class 300, RF, WN, bore to match pipe
ASTM A 182/A 182M F316L
89
Flanges ASME B16.47
NPS 26 – 30, Class 300, Series A, RF, WN, bore to match pipe
ASTM A 182/A 182M F316L
57
Orifice Flanges ASME B16.36
NPS 2 – 24, Class 300, RF, WN, bore to match pipe
ASTM A 182/A 182M F316L
Gaskets ASME B16.20
Class 300, spiral wound, CS centering ring, 304SS windings, flexible graphite filler, inner ring for all sizes
60
Fittings ASME B16.11
NPS ½ – 1½, SW, Sch. 160 and lighter–Class 3000, Sch. XXS and heavier–Class 6000
ASTM A 182/A 182M F316L
54, 62
Fittings ASME B16.9
NPS 2–8, BW, SMLS, CL-S, same thickness as pipe NPS 10-36, BW, Welded CL-WX
ASTM A 403/A 403M WP316L
55, 56
Branch Outlet Fittings (O-lets) MSS SP-97
NPS ½ – 1½, branch outlet fitting, SW outlet, Class 3000 for Sch. 160 and lighter, Class 6000 for Sch. XXS NPS 2 – 6, branch outlet fitting, BW outlet to match branch wall NPS 4 – 6, Buttweld O-let (Light Wall) Fitting
ASTM A 182/A 182M F316L
53, 62
Pipe ASME B36.10M ASME B31.19M
NPS ½ –8, thickness (see below) NPS 10 – 30, EFW, Class 1
ASTM A 312/A 312M TP 316L (SMLS) ASTM A 358/A 358M 316L CL.1 (welded)
51, 52, 53, 54, 63, 66
Spectacle Blind / Paddle Spacer / Blank ASME B16.48
NPS 1-24, Class 300, RF ASTM A240 316 (Refer to Table 4, PG-PDS 03-01-01, for the type)
† See the Appendix of PG-PDS 03-01-01 for text of numbered Notes.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 36 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Corrosion Allowance (C.A.) (see Note 87 in the Appendix of PG-PDS 03-01-01)
A C.A. = 0 mm
NPS Sch.
½ – 2 40S
3 – 6 40S
8 – 10 20
12 – 30 30
Class 300 – Stainless Steel–Process Piping B11A Classification Sheet
Branch Table
30 BWT
24 BRT BWT
20 BRT BRT BWT
18 BRT BRT BRT BWT
16 RB RB BRT BRT BWT
14 RB RB RB BRT BRT BWT
12 RB RB RB RB BRT BRT BWT
10 RB RB RB RB RB BRT BRT BWT
8 RB RB RB RB RB RB BRT BRT BWT
6 WOL WOL WOL WOL WOL WOL WLL BRT BRT BWT
4 WOL WOL WOL WOL WOL WOL WLL WLL BRT BRT BWT
3 WOL WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT
2 WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL BRT BRT BWT
1½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL BRT SWT
1 SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SWT
¾ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SWT
B
R
A
N
C
H
S
I
Z
E
S
N
P
S
½ SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SOL SRT SRT SRT SWT
30 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½
H E A D E R S I Z E S – N P S
Legend:
BWT = Buttweld Tee SOL = Socket Weld O-let fitting RB = Reinforced Branch
WLL = Buttweld O-let Fitting(Light Wall)
SRT = Socket Weld Reducing Tee BRT = Buttweld Reducing Tee
WOL = Weld O-let Fitting
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 37 of 43 Rev 0
2.3 Class 300: Stainless Steel–Process Piping B11A(X)
Class 300 – Stainless Steel–Process Piping B11A(X) Classification Sheet
Service HP Flare
Pipe Material 316L stainless steel
Corrosion Allowance 0mm
Valve Material 316L stainless steel (flanged), 316L stainless ( BW)
Valve Material 316 or 316L stainless steel for flanged valves
Valve Trim 316 stainless steel
ASME Pressure Class 300
Design Code ASME B31.3
PWHT No
Limits based upon flange ratings, unless noted otherwise
(C) (kPa-g) (F) (psig)
−101 to 38 4136 −150 to +100 600
93 3516 200 510
149 3137 300 455
177 3013 350 437
Pressure/Temperature Limits
(See Notes 6† & 33†)
Limits based upon 316L flange ratings, unless noted otherwise.
(*) Reference to PG-PDS 03-01-01, Appendix E, Note 6, Clause g), Temperature Range Restrictions for Elastomers in this Line Class are indicated below the valve ID No.
For blow-down scenario (short term condition), elastomer - Viton is suitable to -70°C.
204 2895 400 420
Class 300 – Stainless Steel–Process Piping B11A(X) Classification Sheet
Valves Description ASTM
Specifications ID No. Notes
†
Ball Valves API SPEC 6D
NPS 2-24, Class 300, RF, reduced bore, trunnion mounted, DPE x DPE with cavity bleed valve FBAK9, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-24, Class 300, RF, full bore, trunnion mounted, DPE x DPE with cavity bleed valve FBAK9, 316 SS ball and trim, main seats - RPTFE, other seals – Viton, gas service only, fire-safe design NPS 2-6, Class 300, RF, full bore, floating ball, 316 SS ball and trim, main seats - metal seats, other seals – Lip seals, liquid and mixed phase service, fire-safe design
ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M ASTM A 351/A 351M CF8M
BBAJ0(01) (-50°C to 177°C)* BBFJ0(01) (-50°C to 177°C)* BBFJ0(22)-(M) (204°C)*
2, 3, 6, 7, 8, 9, 11, 20, 21, 28, 33, 58
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 38 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A(X) Classification Sheet
Valves Description ASTM
Specifications ID No. Notes
†
Gate Valves API STD 602
NPS ¾ -1, Class 800, BW x SE, BB, OS&Y, solid wedge, API trim 12 (316 SS), standard port, graphitic packing, integral flange
ASTM A 182/A 182M F316L
YGAK10
3, 22, 28, 33, 58
Gate Valves ASME B16.34
NPS 2 – 4, Class 300, RF, BB, OS&Y, solid wedge, integral flange, API trim 12 (316 SS), standard port, graphitic packing
ASTM A 182/A 182M F316
BGAJ0 3, 22, 28, 29, 33, 58
† See the Appendix of PG-PDS 03-01-01 for text of numbered Notes.
Class 300 – Stainless Steel–Process Piping B11A(X) Classification Sheet
Component/ Standard Description ASTM Specifications Notes†
Bolting ASME B18.2.1 and ASME B18.2.2
Stud bolts Heavy, semi-finished, hex nuts
ASTM A 320/A 320M Gr. L7 ASTM A194/A194M Gr. 4L
80
Flanges ASME B16.5
NPS ¾– 1½, Class 300, RF, WN NPS 2 – 24, Class 300, RF, WN, bore to match pipe
ASTM A 182/A 182M F316L
89
Flanges ASME B16.47
NPS 26 – 30, Class 300, Series A, RF, WN, bore to match pipe
ASTM A 182/A 182M F316L
57
Orifice Flanges ASME B16.36
NPS 2 – 24, Class 300, RF, WN, bore to match pipe
ASTM A 182/A 182M F316L
Gaskets ASME B16.20
Class 300, spiral wound, CS centering ring, 304SS windings, flexible graphite filler, inner ring for all sizes
60
Fittings ASME B16.11
NPS ½ – 1½, SW, Sch. 160 and lighter–Class 3000, Sch. XXS and heavier–Class 6000
ASTM A 182/A 182M F316L
54, 62
Fittings ASME B16.9
NPS 2–8, BW, SMLS, CL-S, same thickness as pipe NPS 10-36, BW, Welded CL-WX
ASTM A 403/A 403M WP316L
55, 56
Branch Outlet Fittings
NPS 1½– 6, sweepolet BW outlet fitting (B31.3), to match branch wall
ASTM A 182/A 182M F316L
See notes in branch table
Pipe ASME B36.10M ASME B31.19M
NPS ½ –8, thickness (see below)
ASTM A 312/A 312M TP 316L (SMLS)
51, 52, 53, 54, 63, 66
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 39 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A(X) Classification Sheet
Component/ Standard Description ASTM Specifications Notes†
NPS 10 – 30, EFW, Class 1
ASTM A 358/A 358M 316L CL.1 (welded)
Spectacle Blind / Paddle Spacer / Blank ASME B16.48
NPS 1-24, Class 300, RF ASTM A240 316 (Refer to Table 4, PG-PDS 03-01-01, for the type)
† See the Appendix of PG-PDS 03-01-01 for text of numbered Notes.
Class 300 – Stainless Steel–Process Piping B11A(X) Classification Sheet
Corrosion Allowance (C.A.) (see Note 87 in the Appendix of PG-PDS 03-01-01)
A C.A. = 0 mm
NPS Sch.
½ – 2 40S
3 – 6 40S
8 – 10 20
12 – 30 30
Note: For all size, use D/t ratio <100.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 40 of 43 Rev 0
Class 300 – Stainless Steel–Process Piping B11A(X) Classification Sheet
Branch Table
30 BWT
24 BRT BWT
20 BRT BRT BWT
18 BRT BRT BRT BWT
16 BRT BRT BRT BRT BWT
14 BRT BRT BRT BRT BRT BWT
12 BRT BRT BRT BRT BRT BRT BWT
10 BRT BRT BRT BRT BRT BRT BRT BWT
8 BRT+R
BRT+R
BRT BRT BRT BRT BRT BRT BWT
6 BRT+R
BRT+R
BRT+R
BRT+R
BRT BRT BRT BRT BRT BWT
4 BRT+R
BRT+R
BRT+R
BRT+R
BRT+R
BRT+R
BRT+R
BRT BRT BRT BWT
3 SWL SWL SWL SWL SWL SWL SWL SWL SWL BRT BRT BWT
2 SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
BRT BRT BWT
1½ SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
SWL+B
BRT+S
BRT BRT BWT
1 SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
BRT+S
BRT+S
BRT BRT BWT
B
R
A
N
C
H
S
I
Z
E
S
N
P
S
¾ SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
SWL+B+S
BRT+S
BRT+S
BRT BRT BRT BWT
30 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾
H E A D E R S I Z E S – N P S
Note:
This table is applicable for High Pressure Let Down or Other High Velocity Piping w/AIV or FIV. Minimum size shall be NPS 4 for connection to the main header / sub-header w/AIV or FIV. Full encirclement pads shall be used for attachments of all bracing to the header. Bracing shall support in two planes using a minimum one brace in each plane orientated at no less than 45 and no more than 90 degrees part.
Legend:
BWT = Buttweld Tee SWL = Sweepolet Fitting(B31.3)
BRT = Buttweld Reducing Tee B = Braces
R = Reducer S = Swage (Buttweld Both End)
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 41 of 43 Rev 0
APPENDIX: NOTES TO PIPING LINE CLASS 300
The Notes for this PDS can be found in PG-PDS 03-01-01.
In Class 300 and higher (design pressures > 4137 kPa [600 psig]), elastomers shall also be resistant to explosive decompression as might be caused by high pressure gas, especially in the presence of carbon dioxide. See PG-PDS 29-01-37 for more info on elastomers and prevention of explosive decompression.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 42 of 43 Rev 0
ATTACHMENT: PURPOSE CODE DEFINITIONS
Code Description
* Assigned to paragraphs that require the Owner's Engineer to provide additional information or make a decision.
A Assigned to paragraphs that require approval from the Owner's Engineer before the work may proceed or the design is finalized.
C Assigned to paragraphs whose primary purpose is reduced costs. Reduced cost in this context refers to initial investment cost and does not include life cycle cost considerations. Life cycle cost considerations are captured under reliability, maintainability, or operability purpose codes.
E Assigned to paragraphs whose primary purpose is driven by environmental considerations. Environmental considerations typically include specifications intended to protect against emissions/leakage to the air, water, and/or soil. Deviations from the specifications contained in such paragraphs require formal review and approval according to local environmental policy.
I Assigned to paragraphs that provide only clarifying information, such as Scope statements, definitions of terms, etc.
M Assigned to paragraphs whose primary purpose is to provide for maintainability of equipment or systems. Maintainability provisions are those that facilitate the performance of maintenance on equipment/systems either during downtimes or during onstream operations.
O Assigned to paragraphs whose primary purpose is to assure operability of equipment or systems. Operability is the ability of the equipment/system to perform satisfactorily even though conditions are off-design, such as during start-ups, process swings, subcomponent malfunction, etc.
R Assigned to paragraphs whose primary purpose is to improve or assure the reliability of equipment or systems. Reliability is a measure of the ability of equipment/systems to operate without malfunction or failure between planned maintenance interventions.
S Assigned to paragraphs containing specifications/guidance where the primary purpose is the avoidance of incidents impacting personnel safety, operational safety, and the public in general and/or involving responses to emergency situations. Any deviation from the specifications contained in such designated paragraphs requires formal review and approval according to local safety policy.
Personnel Safety: Refers to incident-related personnel injuries or illness, e.g., burns, cuts, abrasions, inhalation of or exposure to dangerous substances, etc., that could result in medical treatment, restricted work, lost-time incidents, or fatalities.
Operational Safety:
Refers to the prevention and control of process releases, fires, and/or explosions that could result in damage to equipment, process disruption, or personnel injury or illness.
PG-PDS 03-20-04 Upstream Piping Classification – Line Class 300 Mar 2011
Esso Highlands Limited Strictly Confidential – For Venture Use Only PGHU-EH-LSPDS-002004
Page 43 of 43 Rev 0
RECORD OF CHANGE
Revision 0 Date: 21/03/11
Location Action Description
Initial Publish