Production logging tools 2016-08-29 16:08:40

IDataCan www.datacan.caI

PRODUCTION LOGGING TOOLS

www.datacan.ca

IIDataCan

Company Overview

DataCan specializes in the design and manufacture of downhole pressure and temperature monitoring solutions. We consider ourselves responsible for “the next generation of downhole tools”.

• DataCan provides exceptional customer service• Custom and exclusive solutions and projects• Has the fastest program and download speeds• The fastest graphing software• High temperature reliability• The best mechanical seals, and welded tool designs for leak protection• Shock mounted electronics, and drop testing quality control

Since 2006, DataCan has been strategically developing leading edge technologies. DataCan started with memory pressure and temperature guages, quickly added surface read out telemetry, and which lead to designing and building a customizable monitoring system. In 2014, the well known Lee Specialties Production Logging Tools and Surface Acquisition systems were added to the product line, further expanding the catalogue.

IVDataCan

Table of Contents

Production Logging Tools

Acquisition Systems & Software

Software

New Tools Analog Noise Tool Digital Noise ToolPopular Logging Tools Memory Adaptor Tool (MAT) Telemetry Gamma Ray Gradiomanometer Dielectric Pressure/Temperature/Flow (PTF) Sensor Fullbore Spinner Continuous Spinner Inline Flowmeter Flow TemperatureSpecialty Logging Tools Dual Spaced Neutron RA Density Dual Gamma Ray Tracer Ejector 3-Sensor CaliperAccessory Tools Knuckle Joint Cablehead Roller Centralizer Bowspring Centralizer Wellhead Pressure Hydraulic Tension DeviceTool String Configuration ExamplesRecommended Spare Parts

Premier Data Acquisition SystemPortable Data Acquisition SystemPremier Data Acquisition System Panels DSP Panel Surface Power Supply Shooting Panel Thermal Printer Oscilloscope

Premier Acquisition Software Premier Logger Cement Bond Logging & Waveform Noise Acquisition DSP Manager Memory Logging (MAT Job) LWPL Reports Log Header Log Composer Tool Diagram Well DiagramLinewise SystemLinewise Accessories Magnetic Mark Detector Winch Shutdown ControlLinewise Software Depth Panel Weight Indicator Linewise Report Pressure Indicator Flow Meter Temperature LineThickness CCL MeterDigital Depth Display (DRS)Portable Memory Recorder (PMR)CablesSoftwareServices

23

456789

1012141516

1718192021

2223242526272830

3234

3535363637

404142424343444545464748

50505152525354545555555657585859

PRODUCTION LOGGING TOOLS

2DataCan

Analog Noise ToolNew Tools

Description

• Operates independently or in conjunction with existing tool strings• Real time data to surface• Unfiltered data• Corrosion resistant Inconel construction• Selectable fixed gain amplifier

Analog Noise Tool provides unique information to identify a variety of downhole flow scenarios. Small changes in flow can be difficult to isolate with traditional flow meters and temperature probes. The By capturing the noise created by cavitating fluid or bubbling gases the Analog Noise Tool locates where fluid is moving through even the smallest openings. The DataCan Analog Noise Tool can be used as a stand-alone logging tool or combined with additional sensor via the e-line pass thru.

Specifications

ODLengthWeightTemp. RatingPressure RatingMidband SensitivityFrequency RepsonseTop ConnectionBottom Connection

1.375 in. (3.49 cm)TBDTBD

350°F (177°C)15,000 psi (103 MPa)

-196 dB re 1V/μ Pa100-10,000 Hz

1-7/16” GO Socket1-7/16” GO Pin

Part Number: H2S Service: 106231

www.datacan.ca3

Digital Noise Tool

Description

• Operate with the Telemetry or Memory systems• Real time data to surface when used with Telemetry• Filtered data• Corrosion resistant Inconel construction• Selectable fixed gain amplifier

Much like the Analog version, the Digital Noise Tool records sound created by moving fluids. The Digital Noise Tool is designed to work with either the Telemetry or Memory logging tools from Lee Specialties.

The Digital Noise Tool is available in two configurations: Single Channel or Dual Channel. The Dual Channel Digital Noise Tool has two acoustic sensor spaced out in a fashion to allow the user to determine the direction from which the recorded sound is originating. This feature is especially useful in minimizing the time spent locating areas of interest.

Part Number: Single Channel H2S Service: 106232 Dual Channel H2S Service: 106233

Specifications

OD LengthWeightTemp. RatingPressure Rating


350°F (177°C)15,000 psi (103.5 MPa)


350°F (177°C)15,000 psi (103.5 MPa)

Single Channel Dual Channel

4DataCan

Memory Adaptor Tool

Description

The Memory Adaptor Tool stores data within its internal memory. A casing collar locator (CCL) is contained in the adaptor, a separate Gamma Ray Tool is recommended for operation. The MAT tool uses a lithium battery pack as its power source.

• Collects digital data from connected downhole tools• Lithium battery pack powers MAT and all tools in string• Stores data within 64MB internal memory core• 1, 12.5, and 25 samples/sec recording rates per tool channel• Data is downloaded into a computer via USB• Software generates Premier Logging file• CCL contained within tool body• Perfect for use in remote or hazardous environments

Part Number: Standard Service: AM015WA0008 H2S Service: AM015WB0008 High Temperature Standard Service: 106235 High Temperature H2S Service: 106236

Spare Parts• Hex Socket Cap: SCC6-32SB01875• Seal Kit: AM015RK0001• Spring Pin: SP1/16SB050 (x2)

Accessories• Lithium Battery: AM015UU0006• Battery De-Passivation Box: AE310UU0001• 18V AC Adaptor: AE309UU0008• Portable Memory System: AE302UU0008 (Includes: Linewise System, Premier Software Suite, laptop, thermal printer, and rugged carrying case)

Popular Logging Tools

Specifications

OD (collapsed)LengthWeightTemp. RatingPressure Rating

1.375 in. (3.49 cm)44.9 in. (114 cm)

10.8 lb (5 kg)302°F (150°C)

15,00 psi (103 MPa)

1.375 in. (3.5 cm)44.9 in (114 cm)

10.8 lb (5 kg)350°F (177°C)

15,000 psi (103.5 MPa)

Standard Temperature High Temperature *NEW*

*NEW**NEW*

www.datacan.ca5

Telemetry

Description

The Lee Specialties Telemetry is generally wireline deployed, providing real-time data from the well to the acquisition system. The Telemetry can multiplex up to 16 digital channels of data. Included in the Telemetry are a casing collar locator (CCL) and a gamma ray detector. The telemetry’s bottom sub contains a multi-pin connector that permits communication with a variety of production logging tools.

• Wireline deployed - braided or electric line• Collects digital data from connected downhole tools• Real-time data transmission to surface acquisition system• Multiplex up to 16 digital channels• Casing collar locator (CCL) and gamma ray detector contained

within body• Sensitive sodium iodide scintillation crystal used for gamma ray

detection

Specifications

ODLengthWeightTemp RatingPressure Rating

1.375 in. (3.49 cm)59.6 in. (151 cm)

14.2 lb (6.4 kg)350°F (177°C)

15,00 psi (103 MPa)

Part Number: Standard Service: AM003WA0001 H2S Service: AM003WB0001

Spare Parts

• Spring Pin: SP1/16SB050 (x6)• Seal Kit: AM003RK0001

6DataCan

Gamma RayDescription

The Gamma Ray Tool detects naturally occuring and artificially induced gamma ray radiation. The Gamma Ray is used to correlate well lithography.

Gamma Ray Tools are useful in recording induced radiation, such as tracer logging to determine fluid movement by tracing radioactive iodine ejected into wellbores.

• Sensitive sodium iodide scintillation crystal• Photo multiplier tube• Detects naturally occuring and artificially induced gamma

ray radiation• Correlates surrounding lithology• Tracer logs can determine fluid movement or direction of

fractures• Typically used with Memory Adapter Tool (MAT)

Specifications

ODLengthWeightTemp. RatingPressure Rating

1.375 in. (3.5 cm)35.4 in. (90 cm)

8.6 lb (4 kg)350°F (177°C)

15,000 psi (103.5 MPa)

Part Number: Single Sensor Standard Service: AM012WA0001 Single Sensor H2S Service: AM012WB0001 Dual Sensor Standard Service: AM012WA0002 Dual Sensor H2S Service: AM012WB0002

Spare Parts

• Seal Kit: AM012RK0001

www.datacan.ca7

Gradiomanometer

DescriptionThe Gradiomanometer is a non-radioactive device that derives fluid density in a well. A high-resolution transducer measures differential pressure over the length of a 24-inch column of fluid. Density is derived from the hydrostatic pressure generated over this column.

This tool is used to establish the density of fluids or gases in a well, primarily in production logging applications.

The Gradiomanometer is used with other tools in a tool string, and transmits its data to either the Telemetry Tool or the Memory Adapter tool (MAT).

• Derives fluid density in a well• Measurements can be obtained while the tool is moving or stationary• 0.001 g/cc (1 Kg/m³) resolution• ±0.03 g/cc (±30 Kg/m³) accuracy• 0-2 g/cc (0-2,000 Kg/m³) range

Specifications


1.375 in. (3.5 cm)51.6 in. (131 cm)

15.6 lb (7 kg)350°F (177°C)

15,000 psi (103.5 MPa)Part Number: Standard Service: AM002WA0001 H2S Service: AM002WB0001

Spare Parts• Seal Kit: AM002RK0001• O-Ring: PM933RC3x1.5 (x2)• Upper Tube Bushing: PM002CB0029• Upper Tube Screw: PM002CB0028• Sockethead Cap Screw #6-32x0.75L: 101452 (x2)• Sockethead Cap Screw #6-32x0.25L: 100141 (x2)• Bottom Sense Port Plug: PM002SA0027• Gradio Port Plug: PM002SA0004 (x2)• Cap Screw 6-32UNCx0.1875: PM951SB006-32-018 (x2)• Feed Thru Pin: PM002UU0034 (x4)• Lower Buffer Tube: PM002SA0036• Lower Buffer Tube Extender: PM002SD0020

Accessories

• Gradio Fill Pump: AM002UU0015• Multipin Jumper Cable: AM007UU0007• Gradio Fluid: PE545UU0035-1

8DataCan

Dielectric

Description

The Dielectric tool measures the capacitance of fluid that passes between the tool’s probe and body. This measurement is to determine water percentage and to locate first water entry (commonly referred to as fluid capacitance, water hold-up, or water cut).

• Measures fluid capacitance (also known as “water hold-up” or “water cut”) between probe and tool body

• Measurement determines water percentage

Specifications


1.375 in. (3.5 cm)26.8 in. (68 cm)

6.6 lb (3.1 kg)350°F (177°C)

15,00 psi (103.5 MPa)


Spare Parts


www.datacan.ca9

Pressure/Temperature/Flow (PTF) Sensor

Description

The high-resolution Pressure/Temperature/Flowmeter (PTF) tool is used to measure pressure, temperature, and fluid velocity in a wellbore.

The tool transmits data from the transducer (pressure and internal temperature) serially to a telemetry tool, which transfers data to a surface acquisition system, or to a memory adapter, which stores data within internal memory.

• Incorporates a quartz pressure sensor, temperature sensor, and bidirectional flow sensor

• Pressure sensor has built-in temperature compensation• Bellows and buffer of silicone oil isolates sensors from well

bore fluids• RTD resistor temperature sensor• Flowrate sensor obtains rotational direction and speed from

an attached spinner• PTF is compatible with both fullbore and continuous spinners• 0.02 psi (0,14 kPa) pressure resolution• ±3.2 psi (±22 kPa) pressure accuracy (equal to 0.02%)• 0.018°F (0.01°C) temperature resolution• ±1.6°F (±1°C) temperature accuracy• 0.36°F (0.2°C) temperature repeatability• ±2% flow accuracy

Specifications


1.375 in. (3.5 cm)27.2 in. (69 cm)

7.8 lb (3.5 kg)350°F (177°C)

15,000 psi (103.5 MPa)

Spare Parts

Part Number: Standard Service: AM008WA0010 H2S Servce:AM008WB0010

• Seal Kit: AM008RK0010• Spring Pin: SP1/16SB050 (x2)• Port Plug: PM008SB0029• Socket Cap Screw 8-32x3/16”: SCC8-32SB01875• Socket Head Cap Screw 10-32x0.25”: PE545UU0045• Spacer O-Ring: PM008SA0015

Accessories

• PTF Fill Pump and Adaptor: AM002UU0005

10DataCan

Fullbore Spinner

Description

The Fullbore Spinner is a versatile and reliable fluid velocity measurement tool that incorporates a collapsible impeller that allows the spinner to be run through tubing and expand into a large diameter casing. This design provides a velocity measurement of a large cross-sectional area. The sensitivity of a Fullbore Spinner results in accurate flow measurement across the well diameter.

• Incorporates a collapsible impeller• Spinner collapses to run through tubing and expands to larger

diameter casing• Provides large cross-sectional velocity measurements• Increased sensitivity results in more accurate flow

measurements across well diameter• 3.28 ft/min (1 m/min) threshold velocity

Part Number: 5” Standard Service: AM005WA0002 5” H2S Service: AM005WB0002 7” Standard Service: AM005WA0008 7” H2S Service: AM005WB0008

7 in.

Specifications

OD (collapsed)OD (expanded)LengthWeightTemp. RatingPressure Rating

1.375 in. (3.5 cm)5 in. (12.7 cm)

20.1 in. (51 cm)4 lb (1.8 kg)

350°F (177°C)15,000 psi (103.5 MPa)

1.375 in. (3.5 cm)10 in. (25.4 cm)27.6 in. (70 cm)

6 lb (2.7 kg)350°F (177°C)

15,000 psi (103.5 MPa)

5” 7”

www.datacan.ca11

• Spring Wear Gauge: PM005SA0062

5 in.

4-

161--8442118-1111-114-

Spare Parts

Bow Spring 5”: PM005SA0028Bow Spring 7”: PM005SA0037Undercut Phillips 8-32x0.3125”: PFU8-32SB031Impeller Assembly 3”: AM005UU0015Impeller Assembly 4”: AM005UU0022Impeller Assembly 5”: AM005UU0023Pin 1/8” diameterx0.70”: PM005NE0036Pin 3/32” diameterx0.58”: PM005NE0037Pin 3/32” diameterx0.65”: PM005NE0038Bearing: PM005UU0029Socket Head Screw 4-40x0.188”: PE545UU0071Set Screw 10-32x0.19”: SSC10-32SB019Hex Socket Cap Screw 4-40x0.1875”:SCC4/40SB0188Socket Set Screw 6-32x3/16”: SSS6-32x3/16SBSocket Cap Screw 8-32x3/16”: SCC8-32SB01875Short Shaft Spacer: PM005SD0020Long Shaft Spacer w/ Guard: PM005SD0041Impeller Shaft 5”: PM005TA0017Impeller Shaft 7”:PM005TA0051Impeller Shaft Nut: PM005TA0018Nose Cone: PM005UU0025Long Arms 5”: PM005UU0009Long Arms 7”: PM005UU0049

5” 7”-4

16-1

optional8442-182111-111-4

Accessories

12DataCan

Continuous Spinner

1.375 in.

1.688 in.

2.125 in

The Continuous Spinner incorporates a single piece solid helical impeller in the tool body. This configuration is effective in restricted bore holes, tubing, and in areas of very high-flow velocity. The spinner is available in a number of sizes to accomodate various applications.

• Impeller incorporated into the tool body• Effective in restricted boreholes, tubing, and high flow velocity• Available in 1.375 in. to 2.125 in. diameters• Used in combination with PTF tool or flow tool

Description

www.datacan.ca13

Specifications


1.375 in. (3.5 cm)8.7 in. (22 cm)

2.2 lb (1 kg)350°F (177°C)

15,000 psi (103.5 MPa)

1.688 in. (4.3 cm)9.1 in. (23 cm)2.4 lb (1.1 kg)

350°F (177°C)15,000 psi (103.5 MPa)

1.375” 1.688” 2.125”2.125 in. (5.4 cm)9.25 in. (23.5 cm)

2.8 lb (1.3 kg)350°F (177°C)

15,000 psi (103.5 MPa)

Part Number: 1.375 in. Standard Service: AM005WA0003 1.375 in. H2S Service: AM005WB0003 1.688 in. Standard Service: AM005WA0004 1.688 in. H2S Service: AM005WB0004 2.125 in. Standard Service: AM005WA0007 2.125 in. H2S Service: AM005WB0007

Spare Parts

Bearing: PM005UU0029Socket Cap Screw 8-32x3/16”: SCC8-32SB0187Socket Head Screw 4-40x0.094”: PE545UU0048Socket Set Screw 6-32x3/16”: SSS6-32x3/16”ABImpeller 1.375”: PM005TA0011Impeller 1.688”: PM005TA0012Impeller 2.125”: PM005TA0034

1.375” 1.688” 2.125”2242--1

2242-1-

22321--

Accessories

• 5” Fullbore Conversion Kit to 1.375” Continuous: AM050UU0025• 5” Fullbore Conversion Kit to 2.125” Continuous: AM050UU0017

14DataCan

Inline FlowmeterThe Inline Flowmeter contains an electrical through-connection allowing its placement anywhere in a tool string. When operated in combination with a fullbore flowmeter, the inline flowmeter allows for production profiling in tubing and casing on a single logging run. It may also be used as a backup flowmeter for horizontal well logging where the fullbore spinner may be restricted by debris in the well. This flowmeter performs in all well orientations.

The spinner is mounted to precision roller bearings. Rotation detection is through zero drag hall effect devices, giving very low threshold and optimizing low flow measurement. At high flow rates, the flowmeter is similarly reliable due to the precision bearings employed in the assembly.• Precision roller bearings• Zero drag sensor provides low threshold and optimizes low-

flow measurement• Run at any point in a tool string• Run in combination with a fullbore or continuous spinner to

obtain production profiling in a single logging run• Operates in all deviated and horizontal wells

Specifications


1.688 in. (4.3 cm)31.1 in. (79 cm)

11 lb (5 kg)350°F (177°C)

15,000 psi (103.5 MPa)

2.125 in. (5.4 cm)32.3 in. (82 cm)

14 lb (6.4 kg)350°F (177°C)

15,000 psi (103.5 MPa)

1-8212

2.125 in.1.688 in.

1.688 in. 2.125 in.

Spare Parts

Seal Kit: AM005RK0013Seal Kit: AM005RK0016Pan Head Phillips Screw #4-40x.25L: 101458Flow Meter Bearing: PM005UU0029Set Screw 10-32x0.19”: SSC10-32SB019Set Screw #10-32x0.125L: 102737

1.688 in. 2.125 in.-18212

Part Number: 1.688 in. Standard Service: AM005WA0013 1.688 in. H2S Service: AM005WB0013 2.125 in. Standard Service: AM005WA0016 2.125 in. H2S Service: AM005WB0016

Description

www.datacan.ca15

Flow

Description

The Flow Tool works in conjunction with Lee Specialties continuous or fullbore flowmeters to measure flow in a wellbore.

The tool transmits frequencies from the flowrate sensors to a telemetry tool, which transfers data to a surface acquisition system, or to a memory adapter, which stores data within internal memory.

• Flowrate sensor obtains rotational direction and speed from an attached spinner

• The flow tool is compatible with both the fullbore and the continuous spinners

• 0.083 rps flow resolution• ±2% flow accuracy

Specifications


1.375 in. (3.5 cm)16.75 in. (42.4 cm)

3.75 lb (1.7 kg)350°F (177°C)

15,000 psi (103.5 MPa)


16DataCan

Temperature

Description

The Temperature Tool measures temperature in a wellbore.

The Temperature Tool transmits a frequency based on the measurement of a RTD (Resitive Temperature Device) to a telemetry tool, which transfers data to a surface acquisition system, or to a memory adapter, which stores data within internal memory.

• RTD resistor temperature sensor• 0.018°F (0.01°C) temperature resulution• ±1.6°F (±1°C) temperature accuracy• 0.36°F (0.2°C) temperature repeatability• Compatible with all Lee Specialties logging tools

SpecificationsODLengthWeightTemp. RatingPressure Rating

1.375 in. (3.5 cm)22.75 in. (57.8 cm)

6.6 lb (3.1 kg)350°F (177°C)

15,000 psi (103.5 MPa)


Spare Parts


www.datacan.ca17

Dual Spaced Neutron

Description

The Dual Spaced Neutron Tool uses two neutron detectors and a neutron source to provide information on the formation porosity.

• Neutron source (customer to provide source)• Boron shielding between source and detectors• The tool uses He3 (Helium-3) detectors to derive readings• Compatible with surface readout (telemetry) or Memory

operation

Specifications


1.688 in. (4.3 cm)52 in. (132.1 cm)

18 lb (8.2 kg)350°F (177°C)

15,000 psi (103.5 MPa)


Specialty Logging Tools

18DataCan

RA Density

Description

The RA Density Tool uses low energy gamma rays to determine the downhole fluid density during a production log. The tool provides consistent and reliable measurement in deviated and horizontal wells while remaining unaffected by flow rates.

Gamma rays are emitted from a radioactive source at one end of the measuring cell and are detected at the opposite end by a scintillation detector and photomultiplier.

• Tungsten shielded detector is highly resistant to radioactive interference

• Operates in all deviated and horizontal wells• Density measurements in a range of fluid flow rates• 0-1.4 g/cc (0 - 1,400 Kg/m3) range• ± 0.03g/cc (30 Kg/m3) accuracy• Gamma Ray source required (not included)• Multi-phase production profiling when used in conjunction

with other Lee Specialties production logging tools• Compatible with all Lee Specialties production logging tools

Specifications


1.375 in. (3.5 cm)38 in. (96.5 cm)

11 lb (4.9 kg)350°F (177°C)

15,000 psi (103.5 MPa)

Part Number: H2S Service: AM028WB0011

www.datacan.ca19

Dual Gamma Ray

Description

The Dual Gamma Ray Tool employs two sensitive iodide sodium scintillation crystals and two photomultiplier tubes to detect gamma ray radiation. Use the tool to correlate to the surrounding lithology of the well.

Dual Gamma Ray logs are useful for recording induced radiation. A tracer log can determine fluid movement by tracing radioactive iodine ejected into the wellbore.

• Two scintillation crystal gamma ray detectors• Detects naturally occuring and artificially induced gamma ray

radiation• Correlates surrounding lithology

SpecificationsODLengthWeightTemp. RatingPressure Rating

1.375 in. (3.5 cm)67.5 in. (171 cm)

16.3 lb (7.4 kg)350°F (177°C)

15,000 psi (103.5 MPa)

Part Number: AM012UU0002

20DataCan 20

Tracer Ejector

Description

The Tracer Ejector Tool uses a pressure balanced chamber to eject radioactive iodine. It is used in the identification of flow behind the casing and determines fluid velocity and direction

• Non-motorized• Pressure balanced chamber• Maintains a constant internal pressure which exceeds the

wellbore pressure• Electrically activated solenoid ejects a finite amount of

radioactive fluid• Radioactive fluid concentration is minimal with a short half life• Gamma ray detectors (sold separately) determine fluid

velocity and direction• Flow profiles can be determined from data sent to acquisition

system• Fill pump provides a safe and effecient method of transfer

to radioactive fluids• Radioactive fluid not provided

Specifications


1.375 in. (3.5 cm)40.9 in. (104 cm)

18 lb (8.2 kg)350°F (177°C)

15,000 psi (103.5 MPa)

Accessories

Part Number: AM004WB0008

• Ejector Fill Pump - AM004UU0003

www.datacan.ca21

3-Sensor Caliper

The Three-Sensor Caliper is a downhole, production logging tool used to measure the inside diameter of a wellbore. Three sensors, connected to three equally spaced arms, measure the diameter of the well. These measurements allow operators to gather information regarding the condition of the well. Data from the tool indicates the presence and inside diameter of restrictions or out-of-round conditions in a wellbore.

The tool is designed to pass from a large diameter to a smaller diameter while logging down. It can also log up to a small diameter restriction without locking up the arms.

• Measure inside diameter of a wellbore• Sensors connected to three equally spaced arms provide well

ID measurement• Arms move independent of each other to allow for most

accurate reading• Condition of a well can be extrapolated from measurements• Tool data indicates presence of restrictions or out-of-round

conditions• Designed to pass from large to lesser diameters while

logging down or up without locking up the arms• 0.2 in. (0.5 cm) resolution• 1.625 in. - 11 in. (4 cm - 28 cm) measurement range

Specifications


1.375 in. (3.5 cm)60.375 in. (153 cm)

16.2 lb (7.3 kg)350°F (177°C)

15,000 psi (103.5 MPa)Part Number: Standard Service: AM016WA0001 H2S Service: AM016WB0001

Accessories• Caliper Calibration Plate: PM403AA0011

Description

22DataCan22

Knuckle Joint

Description

The Lee Specialties Knuckle Joint is used with other production logging tools.

The Knuckle Joint can pivot 10° thanks to its ball connector sub. This pivoting ability aids movement of a tool string through deviated, misaligned, or horizontal wells. It also allows a tool string to be de-centralized.

• Bottom section of tool pivots• 10° bend angle • Aids in moving tool string through deviated, misaligned, or

horizontal wells• Can be used to de-centralize string

Specifications


1.375 in. (3.5 cm)20.1 in. (51 cm)

7.4 lb (3.4 kg)350°F (177°C)

15,000 psi (103.5 MPa)

Part Number: Multi Pin Standard Service: AM017WA0001 Multi Pin H2S Service: AM017WB0001 Single Pin Standard Service: AM017WA0002 Single Pin H2S Service: AM017WB0002

Spare Parts

• Set Screw #10-32x0.375: 104143 (x2)• Cap Head Screw 1/4-28x.250”: PE169UU0096• O-Ring 2-120 Viton 90: PM933RC2120 (x10)• O-Ring 2-119 Viton 90: PM933RC2119 (x4)

Accessory Tools

www.datacan.ca23

• 7/32” Cablehead Kit Assembly: AM009UU0007• 5/16” Cablehead Kit Assemly: AM009UU0008

Spare Parts

Description

• Intended as a “weak link” if tool string becomes stuck in a wellbore

• Wireline will pull out of the cablehead in a controlled fashion when predetermined force is applied

• Model shown features 1.375 in (3.49 cm) fishneck for 0.219 (7/32) in. (5.5 mm) braided line

The cablehead provides a mechanical and electrical connection between braided e-line and the tool string.

Specifications

FishneckODLengthWeightTemp. RatingPressure Rating

1.375 in. (3.49 cm)1.438 in. (3.7 cm)

15.125 in. (38.4 cm)5.5 lb (2.5 kg)

350°F (177°C)15,00 psi (103 MPa)

Part Number: 7/32” Standard Service: AM009WA0002 7/32” H2S Service: AM009WB0002 5/16” Standard Service: AM009WA0004 5/16” H2S Service: AM009WB0004

Cablehead

Accessories

• Crimping Pliers: PM009UU0058

24DataCan

Roller Centralizer

The Roller Centralizer is a mechanical device that centralizes a tool string while it is run in or out of the wellbore. Carbide rollers on the contact points prevent wear on the arms as they expand and contract to fit the wellbore.

The Roller Centralizer is positioned anywhere within the tool string except below the PTF (Pressure Temperature Flow) tool. Often, two Roller Centralizers are used in a string, one at the top and one near the bottom, to further increase the string stability.

• Centers tool string as it moves in and out of well• Arms expand and contract to fit casing or tubing• Carbide rollers elliminate friction and wear• 0-100 lb (0-45.4 kg) adjustable arm tension• 2.125 in. model (225 lb arm tension) and single pin version

also available• Pass-through wire


1.375 in. (3.5 cm)9 in. (22.9 cm)37 in. (94 cm)

12.5 lb (5.7 kg)350°F (177°C)

15,000 psi (103.5 MPa)


• Sockethead Cap Screw #6-32x0.5L: 102143 (x18)• Roller Mount Female Countersink: PM011ND0004 (x3)• Roller Mount Female Thread: PM011ND0005 (x3)• Roller Mount Male Countersink: PM011ND0006 (x3)• Roller Mount Male Thread: PM011ND0007 (x3)• Roller Pin: PM011NE0003 (x3)• Roller: PM011TD0001 (x3)• Button Socket Cap Screw 4-40x1/8”: BCS4/40SB0125 (x3)• Dowel Pin 1/8”x1”: PM940SD0008 (x6)• Hex Socket Cap Screw 4-40x0.1875”: SCC4/40SB0188 (x6)• Socket Cap Screw 8-32x3/16”: SCC8-32SB01875 (x2)

Description

Specifications

Spare Parts

www.datacan.ca25

Bowspring CentralizerDescription

The Bowspring Centralizer is a mechanical device used to centralize the tool string while it is run in and out of a cased or tubed well. Centralizing the toolstring helps prevent it from getting stuck downhole and improves sensor accurancy. The Bowspring Centralizer is positioned anywhere on the tool string except below the PTF (Pressure Temperature Flow) tool. Often, two Bowspring Centralizers are used in a string, one at the top and one near the bottom, to further increase the strings stability.

• Centers tool string as it moves in and out of well• Arms expand and contract to fit casing or tubing• Single pin version also available• Pass-through wire

Specifications


1.375 in. (3.5 cm)7 in. (17.8 cm)

32.3 in. (82 cm)11 lb (5 kg)

350°F (177°C)15,000 psi (103.5 MPa)

Part Number: Single Pin Standard Service: AM011WA0004 Single Pin H2S Service: AM011WB0004 Multi Pin Standard Service: AM011WA0006 Multi Pin H2S Service: AM011WB0006

Spare Parts• Seal Kit: AM011RK0006• Bow Spring: PM011SA0037 (x4)• Dowel Pin 1/8”x5/8”: PM940SD0005 (x8)• Undercut Phillips Screw 8-32x0.3125”: PFU8-32SB031 (x16)• Socket Cap Screw 4-40x0.1875”: SCC4-40SB0188 (x8)• Set Screw #10-32x0.25: 101127 (x4)

Accessories• Spring Wear Guage: PM005SA0062

26DataCan

Wellhead PressureDescription

Part Number: 10K Pressure Transducer: AE302UU0002-10 15K Pressure Transducer: AE302UU0015-15

Accessories

• Reel: PM735UU0248• Cord: AE304UU0036-150• 10K Wellhead Assembly: AE304UU0051-10• 15K Wellhead Assembly: AE304UU0051-15

ODLengthWeightPressure RatingAccuracy

1.37 in. (3.47 cm)7.5 in. (19 cm)

1.63 lb (0.74 kg)10,000 psi (68.9 MPa)

±1% FS

1.5 in. (3.8 cm)10.6 in. (27 cm)3.0 lb (1.38 kg)

15,000 psi (103.5 MPa)±1% FS

* Other pressure ratings available upon request

The Wellhead Pressure System provides an electronic reading for pressure at the wellhead.These readings assist with leak detection and are calibrated for use with the Linewise system.

• Available in different pressure ratings• Monitors casing and/or tubing pressure at wellhead• Works with Lee Specialties Linewise• Rugged case for pressure transducer• Class 1, Div 1 Intrinsic Safety rated with Barrier• Hardwired connection to transducer at wellhead

Specifications10K 15K

www.datacan.ca27

Hydraulic Tension DeviceDescription

Specifications

The Hydraulic Tension Device monitors wireline tension by connecting to a sheave, which is then read into Linewise through a transducer. This system allows for tension to be monitored on systems that do not offer a tension device attached to a measuring head. Available in 2000, 4000, and 5000 lbf tension ratings, the Hydraulic Tension Device provides a mechanical gauge readout when connected to a load cell at the wellhead.

• Monitors wireline tension by connecting to a sheave• 2000, 4000, and 5000 lbf line tension ratings available• Higher tension ratings available upon request• Read into Linewise through a transducer• Mechanical Gauge readout• ±1%FS accuracy• Hydraulic connection to load cell at the wellhead

Part Number: 2K Hydraulic Weight Indicator Assembly: AM676UU0002 4K Hydraulic Weight Indicator Assembly: AM676UU0004 5K Hydraulic Weight Indicator Assemdly: AM676UU0005

Accessories

• Hydraulic Hose 1/4”x125’: AM506-A04-0101-1500-Q1MF• Transducer 1K Hydraulic c/w Cable:

AE550UU0009• Transducer 2K Hydraulic c/w Cable:

AE550UU0057• Hand Pump: PM810UU00634• Weight Indicator Fluid: PE550UU0022

28DataCan

Memory Adapter Tool (MAT)*CCL within tool

MAT Battery

Gamma Ray

Gradiomanometer

Telemetry*CCL and gamma ray

within tool1.688 in. Inline

Flowmeter

Roller Centralizer

www.datacan.ca29

Dielectric

Pressure/Temperature/Flow Tool (PTF)

7 in. Fullbore Spinner

3-Sensor Caliper

Pressure/Temperature/Flow Tool (PTF)

1.688 in. Continuous Spinner

Tool String Configuration Examples

30DataCan

Recommended Spare PartsAccessories

O-Ring Kits

Gradiomanometer

Flow Meters

Production Logging Tools are also available

on a rental basis

AM002UU0005 Gradio / PTF Fill pump PE545UU0035 Gradio Fluid PM008AA0030 PTF Fill pump adaptor AE310UU0001 Battery Tester AE309UU0001 18V AC Adapter AM007UU0007 Multipin tool jumper cable AE545UU0008 Tool case (long) AE545UU0009 Tool case (short) PM005SA0062 Bow spring wear gauge PM007AA0038 Field joint toolAM004UU0003 Ejector Fill pump

PM933RC2119 Field Joint #119 O-Ring v90PM933RC2120 Field Joint #120 O-Ring v90PM933RC2022 O-Ring Viton 90# 2-002 PM933RC2006 O-Ring Viton 90#02-006

AE550UU0008 Gradio Transducer

AM005RM0002 Full bore spinner repair kit (Shaft, spacer, nut, impellor blades, impellor springs, bow springs)

AM005UU0015 Full Bore Impellor Assembly - 3”AM005UU0022 Full Bore Impellor Assembly - 4”PM005SA0028 5” Full Bore Spinner SpringPM011SA0037 7” Full bore spinner springPFU8/32SB031 Undercut Philips - 8-32 x 5/16”

PM005TA0051 7” FB Impellor ShaftPM005TA0017 5” FB Impellor ShaftPM005UU0029 Spinner Bearings

24 Hr Technical Support & Rentals

1.403.304.1409

ACQUISITION SYSTEMS & SOFTWARE

32DataCan

Premier Data Acquisition SystemFull System

Description

The Premier Data Acquisition System is a fully featured cased-hole logging technology. It consists of the hardware and software required to record, display, and print API format logs. The data is obtained through surface sensors (Linewise), and downhole tools (DSP). This system sets tool operations and enhances perforating safety.

Wireline depth, tension, speed, etc. is collected by the Linewise System and is plotted with downhole tool data in the Premier Acquisition software. The system’s functionality is increased by using a digital signal processor. This system supports data from many different tool manufacturers.

SpecificationsLengthWidthHeight

24 in. (61 cm)24 in. (61 cm)

47.625 in. (121 cm)

* Based on standard 19” rack mount system(available in various sizes and configurations upon request)

Features• Wireline depth, tension, speed, etc. is collected by Linewise

and plotted with tool data in Premier Logging• Programmable DSP allows for introduction of new tools

without the need for new hardware• Available as a complete rack-mounted assembly installed in

wireline operating cab or as a portable system• Laptop computers provided• Safely detonate charges, set bridge plugs, cement retainers,

and packers while correlating depth through Linewise Software

• Capable of logging CCL’s without AC power using laptop batteries

Tools We Support• Lee Specialties Production Logging Tools• Pulse Gamma Ray, Temperature, and Neutron Tools• Radial Bond Tools• Dual Spaced Neutron Tools• Support combination of Bond Tools and Dual Spaced Neutron

tools in a single pass• Noise Temperature Tools

Part Number: AE302UU0001

www.datacan.ca33

Laptop with Premier Acquisition Software

Linewise Box

Oscilloscope

DSP Panel

Shooting Panel

Power Supply

Thermal Printer

34DataCan

Portable Data Acquisition System

DescriptionThe Lee Specialties Portable Data Acquisition System comes in a waterproof military style case with embeded wheels and sturdy grip carrying handles for easy maneuvering. This sytem is fully customizable to meet your needs.

Specifications

LengthWidthHeight

23 in. (58.4 cm)14 in. (35.6 cm)38 in. (96.5 cm)


Common Configuration Includes

• DSP Panel• Power Supply• Thermal Printer• Laptop Computer

www.datacan.ca3535

Premier Data Acquisition System Panels

Description

DSP Panel

The Lee Specialties DSP Panel is the main data acquisition and translation unit for a logging system. The panel digitizes, filters, and translates data received from downhole tools and sends the information to a logging computer using a USB connection. The DSP Panel also facilitates immediate waveform viewing from direct line and pre-filtered signals using an oscilloscope.

• Translates data from downhole tools• Main power control for the logging system• Programmable DSP allows for introduction of new tools

without the need for new hardware


Surface Power Supply

Description

The Lee Specialties Surface Power Supply provides DC power for downhole tools. The Power Supply has multiple connections that allow an operator to power downhole tools, monitor output power and signal, and to condition line signal for the DSP.

• Provides power to downhole tools• Sends tool signal to the DSP


36DataCan

Premier Data Acquisition System PanelsShooting Panel

DescriptionThe Lee Specialties Shooting Panel is used to remotely fire perforating tools. It performs this function by applying an adjustable, high power DC voltage to the wireline. The Shooting Panel is used to switch between PERF, CCL, LOG, and SAFE mode; as well as switch between two different lines. Its five-stage, two-handed firing process assists in preventing accidental firing of a perforating tool.

• Audible CCL• Keyed operator lock-out• Adjustable CCL gain• Selectable input from two wirelines• ±300VDC, 3 amp perforating output• Works with other logging systems

Thermal Printer

DescriptionThis rugged printer can withstand the harshest environments. It features up to 64 levels of gray, that produces a clear, crisp, gray-scale imaging.

This printer offers high throughput, efficient handling, field proven architechure, unsurpassed grayscale, ease of use, and superb quality.


• Capable of printing on fanfold or rolled paper or film• Maximum print speed of 4 in. (10 cm) per second• Multiple printer options available, speak to your sales

resentative for additional informationPart Number: AE305UU0003

www.datacan.ca37

Oscilloscope

Description

TDS1000B Series oscilloscopes provides a means for the operator to verify correct operation and troubleshoot data communication between the logging tool and logging software.

• Monitors downhole waveforms• Displays signal on the line and pre-filtered signal from the DSP• Optional on portable system• Aids in troubleshooting


38DataCan

SOFTWARE

40DataCan

Premier Acquisition SoftwareDescriptionThe Premier Acquisition Software is a package of applications that allows the operator to acquire, log, assemble, and present various kinds of downhole data. This includes applications for creating well diagrams, customized log headers, tool diagrams, calibration summaries, and logging passes. The Premier Logger is capable of recording and presenting noise logs, cement bond logs, production logs, and all standard pulse tool logs. This software is constantly upgraded and improved based on customer feedback. The software package consists of the following applications:• Premier Logger• Waveform Viewer• Noise Acquisition• DSP Manager

• Memory Logging• LWPL Reports• Log Header• Log Composer

• Well Diagram• Tool Diagram• Linewise


www.datacan.ca41

Premier Logger

Features

• Records data from surface sensors and downhole tools to a computer’s hard drive in real time

• Operators select what information to display and how it is presented without changing raw data

• Change trace presentation while logging

Standard Log Capabilities• Lee Specialties Production Logs• Gamma Ray Logs• Perforating Logs• Cement Bond Logs• Temperature Logs• Noise Logs• Neutron Logs

• Adjustable split window allows review of file during logging

• Log Track presentation is customizable

• Simple and accurate real- time depth adjustment

• Use reference passes and depth markers to assist with depth control

• Export data to various file types including LAS, TXT, and LIS

• Import LAS and TXT files• Supports metric and

Imperial measurements• Easily merge separate

logging passes or LAS data into one complete log

• Put logs on depth by stretch correcting passes separately

• Actual depth from stretch corrections is retained across merged logs

• TVD (True Vertical Depth) can be applied to the log• Ability to markup log passes in playback mode• Includes a reliable mechanism to encourage safe and

accurate perforating• Shifts CCL Trace to display firing of multiple perforations on a

single run

42DataCan

Noise Acquisition

Features

• Gathers audio samples from a stationary noise tool in a well• Allows time for the tool to stabilize at each stop before

recording• Pauses recording as tool moves up or down in the well• Once samples have been collected, users can create Premier

Logger files complete with traces and audio clips

Cement Bond Logging & Waveform Viewer

• Represent a 3 or 5 foot sonic waveform as a Variable Density Log (VDL) or Signature Waveform

• Represent radials as a cement map• Easily recalibrate Sonic Waveforms in playback mode• Use the Live Waveform Viewer to adjust the Sonic

Waveform and calibrate CBL tools

www.datacan.ca43

DSP Manager

Features

• Allows user to select tool to facilitate logging• Manages communication between DSP panel and Premier

Logger

Memory Logging (MAT Job)

Features• Real-time synchronization between the Memory Adaptor Tool

and the Linewise Computer• Used to erase, program, and download data from the Lee

Specialties Memory Adaptor Tool• Merges data from the Memory Adaptor Tool with data from

Linewise to create Premier Logger Files• Import depth from text file

44DataCan

LWPL Reports

Features

• Crossplot - graphs spinner response• Flow Profile - calculates volumetric flow profile from two

spinner passes• XY Plot - configurable axes provides easy access to visual

representation of data for Drawdown/Buildup Testing• RA Tracer Survey (not shown) - derives flow profile based on

velocity shots

XY Plot

Flow Profile

Logged Up

Tool Velocity (m/min)

Logged Down

www.datacan.ca45

Log Header

Features

• Log Header allows the operator to insert job information at the top of a log

• Includes client, well, and pass information• Custom layout (supports more than one

layout)

Log Composer

Features

• Compiles and prints an ordered list of files created by other Premier applications

• Files can be viewed and placed into the log• List can be saved for later viewing and/or

printing• Save plot order as a .pdf or a .tiff file

46DataCan

Tool Diagram

Features

• Provides a visual diagram of tool string configurations• Diagram is drawn to scale and labeled at important sections• String configurations are composed for downhole logging tools, perforation

guns, setting tools, jet and chemical cutters• Tool specifications include maximum OD, tool length, sensor position, etc• Calculates depth offset from CCL, bottom of tool string, or any other sensor

Tool String Configuration

Maximum Length: 6.21 m

CableheadLength: 0.40 m Max. Diameter: 36.0 mm

Memory ToolLength: 1.78 m Max. Diameter: 34.90 mm

Gamma RayLength: 0.90 m Max. Diameter: 34.90 mm

GradiomanometerLength: 1.31 m Max. Diameter: 34.93 mm

DielectricLength: 0.68 m Max. Diameter: 34.93 mm

Hi-Resolution PTFLength: 0.63 m Max. Diameter: 34.93 mm

Full Bore SpinnerLength: 0.51 m Max. Diameter: 34.93 mm

-1.47 m Top of String

0.00 m CCL

1.32 m Gamma Ray

2.29 m Gradio Measurement

3.34 m Dielectric Measurement

4.07 m Pressure4.15 m Temperature

4.42 m Flow

4.74 m Bottom of String

www.datacan.ca47

Well Diagram

Features

• Provides a scaled, visual representation of the wellbore completion• Depth is adjusted as operator inserts or removes well diagram components• Diagram can be built from the bottom up, or from the top down• Well breaks can be added to shorten the diagram• Each well object contains OD, ID, length, and depth properties in order to be

accurate to the physical objects they represent• Application displays company, well, casing, and perforation information• Individual well object drawings are supplied• Customized drawings can be added

Company: ABC CompanyWell: Test WellField: New FieldProv/State: Alberta Country: CanadaLocation: Red DeerLSD: 001 Sec: 002 TWP: 003 RGE: 004 WEST: 5

Date: Jan. 20, 2015 Elev. KB: 1110 Elev. GL: 1100File: E:\Log Data\\WDShowNew.wld

Casing Record Depth (m) Length (m) Size (mm) Weight (kg/m) Grade Thread7” casing 0.00 2200.00 177.80 34.70Perforations

From (m)From (m)From (m) To (m)To (m)To (m) ShotsShotsShots DensityDensityDensity

2110.21 2114.21 60 13.00

Xscale 1:15.0, Yscale 1:80.0 Depth (m) Len (m) OD (mm) ID (mm) Comments

0.00

2103.002103.402104.60

2106.102106.332106.492106.812107.532107.81

2109.312110.21

2114.21

2114.81

2200.00

2103.002200.00

0.401.201.50

0.391.200.320.200.281.50

0.500.40

4.00

0.40

0.20

1.00

73.00177.80

73.00143.00

73.00

73.0073.0073.0073.0073.0073.00

73.00101.60

103.60

101.60

101.60

177.80

63.00143.00

63.0063.0063.00

63.0063.0063.0063.0063.0063.00

Tubing to SurfaceCasing to Surface

On/Off MandrelPackerPup Joint

X NipplePup JointSeparation SubKobe SubSurgePup Joint-Drop Bar

Firing HeadPerf Gun BlankTop Shot

Perf Gun Internal

Bottom ShotPerf Gun BlankBull Nose

Cement Bottom

48DataCan

Linewise System©

Description

The Linewise System is a basic acquisition system comprised of hardware and software that records and displays simple process measurements. Examples of these include: depth, line tension, pressure, temperature, and flow. It can measure four analog voltages, four frequency inputs, and depth counter input. The Linewise System can interface with the Lee Specialties DRS Panel, the Magnetic Mark Detector System, and the Winch Shutdown Control System in this catalogue.

Hardware

• Laptop computer (exisiting or DataCan supplied)• USB interface with four frequency inputs and four analog inputs

• Weight Indicator (wireline tension: hydraulic, inline, s-link)• CCL Meter (shooting CCL)• Pressure Indicator (wellhead pressure for casing and tubing)• Depth Panel• Linewise Report (data gathering)• Pressure Testing• Flow Testing

Applications

www.datacan.ca49

Part Number: Complete System (hardware and software): AE304UU0002

Features

• Simultaneously records and displays wireline depth, speed, tension, and wellhead pressure

• Ideal for any wireline operation• Easy to install• Four digital and four analog inputs• Analog inputs of 0-5V, 4-20mA, 0-10V• Automatically records all data• Incorporates existing measurement equipment• Works with most manufacturers’ measuring heads• Flexible configuration for wireline use, pressure testing, or

other operations

50DataCan

Linewise AccessoriesMagnetic Mark Detector

Winch Shutdown Control

• Recognizes magnetic marks applied to open hole wireline• Sensor mounted to measuring head• Processing module is connected to a Linewise frequency input• Linewise software displays magnetic mark depth that can be

used to correlate depth


• Shuts down winch when depth or tension exceeds preset limits

• Integrated monitoring through Linewise system

Part Number: PE170UU0044

www.datacan.ca51

Linewise Software

Description

The Linewise Software package is a set of applications that allows the operator to display various surface process measurements while carrying out wireline operations on slickline or electric line. The software will record this information, providing the operator with the option of graphing the data. Examples of commonly recorded process measurements include: wireline depth, speed, line tension, and wellhead pressure.

The Linewise Software is designed and developed by our Wireline Industry experts in consultation with our customers. The Linewise Software package includes:

• Depth Panel• Weight Indicator• Pressure Indicator

• CCL Meter• Linewise Logger• Linewise Report

• Flow Meter• Temperature• Line Thickness

52DataCan

Features

Features

Depth Panel

• Displays line depth and speed, well schematic, and tool string motion

• Primary and seconday depths are displayed in feet (ft) or meters (m)

• Line speed can be displayed in meters per minute (m/min), feet per min (ft/min), or feet per hour (ft/hr)

• Secondary depth can be configured to use a secondary (redundant) encoder if desired

• A well schematic can be configured to represent the tool string and its position relative to items within the well

• Tool string representation can be set to the correct length and shown moving up or down a wellbore

• User-defined alarms can be enabled to indicate when present depth and/or speed values have been surpassed

Weight Indicator

• Monitors line tension• Displays current, maximum, and differential tensions• Collects data from an inline tension device or an electric/

hydraulic loadcell• Primary and sub gauges can be customized to display the

desired resolution• Units of measurement can be displayed in pounds force (lbf),

Newtons (N), decaNewtons (daN), or kiloNewtons (kN)• Alarms can be set to warn the operator when preset line

tension has been surpassed• Customized gauge fonts and logo image

www.datacan.ca53

Features

Linewise Report

• Represents data in a graphical format for depth, tension, pressure, flow, and temperature

• Any of the available inputs from the Linewise system can be plotted versus time

• Exports data to a text file for use with other applications• Real-time graphing• Custom titles, comments, and company logo• Graph auto-scaling• Graph displays time in elapsed or real time• Easy to install• Automatically records all data to a computer hard drive• User configured software• Winch actions are recorded and can be charted

54DataCan

Features

Pressure Indicator

• Monitors and displays wellhead pressure or pressure test data

• Displays current, maximum, and differential pressures

• Primary and sub gauges can be customized to display desired resolutions

• Units of measurement can be displayed in pounds per square inch (psi), kiloPascal (kPa), or MegaPascal (MPa)

• Alarms can be set to warn the operator when preset pressure has been surpased

• Compatible with analog or quartz pressure transducers

• Customized gauge fonts and logo image

Features

Flow Meter

• Monitors and displays flow rate and volume• Volume and time units can be changed

www.datacan.ca55

Features

Temperature

• Monitors and displays surface temperature in ° C and ° F

Features

Line Thickness

• Monitors and displays wireline diameter in milimeters or inches

• Designed to work with Lee Specialties Universal Measuring Head

Features

CCL Meter

• Responds when a shooting casing collar locator (CCL) passes a collar in a well

• Needle deflects in positive and negative directions• User adjustable gain (increase/decrease needle deflection)

56DataCan

Description

Digital Depth Display (DRS)

Features

The Digital Depth Display measures depth and speed of the line during wireline operations. The Digital Depth Display is designed for operations where the exact size of the wheel that is attached to the encoder is known.

• Indicates current line depth and speed• Connects to a digital encoder on a braided line or slickline

measuring head• Retains settings when powered down for use during the next

job• Unit is fully independent, or it can be used with Linewise or

any system that supports an electronic encoder• Supplies 5 or 12 volts to an encoder• Measures encoder pulses up to 9999 pulses per revolution• Displays values in either metric or imperial• Calculates scale factors and conversions• Has configurable depth-to-surface alarms• All parameters are adjustable via a numeric menu


www.datacan.ca57

Description

Portable Memory Recorder (PMR)

Features

The Lee Specialties Portable Memory Recorder is a rugged, compact, portable system capable of recording depth and four other configu-rable inputs.

The PMR is designed to be used with the Lee Specialties Memory Adaptor Tool to provide depth correlation information, but can be made compatible with other systems.

• Depth, line speed, tension, and two other analog inputs• Records all data to removable memory card (Windows®

compatible)• Data can be viewed and merged using Lee Specialties

software• Aluminum, NEMA 4, weatherproof enclosure, Mil-Spec,

weatherproof external connections• User selectable tension input - single ended, differential, or I2C

digital communications• Two configurable analog inputs• Samples up to 20 samples/second• Four programmable depth alarms• Internal rechargable battery or external power supply


SpecificationsLengthWidthHeight

10.25 in. (26 cm)3.125 in. (7.9 cm)6.25 in. (15.9 cm)

58DataCan

Cables

• Linewise USB: PE171UU0012• Encoder/Depth Cable: AE304UU0016• Tension/Weight Cable: AE304UU0035• Pressure Cable: AE304UU0019• Thickness Cable: AE304UU0020• Weight Indicator: AE304UU0018

Software

• Linewise CD: AE950UU0000• Premier CD: AE950UU0001

www.datacan.ca5959

ServicesDataCan Services Corp serveral Electrical Engineers and Electronics Technologists that can fully service your production logging tools and any other elements of the Premier Acquisition System.

See the full list of services below:

• Calibration of production logging tools• Calbiration of tension and pressure sensors• Installation of software and racks in trucks and skids• Trouble shooting and fixing of production logging tools• System wide trouble shooting• Software customization• Customer training• Production logging tools are available for rent

24 hr Technical Support

Technicians are available to support you by phone 24 hours a day

1.403.304.1409

60DataCan

DataCan Services Corp.7465-45 Avenue Close

Red Deer, AlbertaT4P 4C2

1.403.352.2245www.datacan.ca

Documents

Production logging tools 2016-08-29 16:08:40