Upload
nguyenkiet
View
220
Download
3
Embed Size (px)
Citation preview
E-CAT5-P-SVC-00-B
50Hz
Semi-vortex Submersible Pump
SVC
■Applications
■Features
Non-automatic SVC model Automatic SVCA model
Automatic alternate and parallel operation SVCT model
※Please note that product may differ from that in the photo in coating color, etc.
①Able to use the pump for a wide range of drainage applications such as
sewage, miscellaneous wastewater and sewage.②Easy to install and treat the pump because of compact size and lightweight.
③Motor protective device built-in. Prevents motor damage due to overload,
constraint and open phase.④Adopts double mechanical seals on the shaft seal device to prevent water
entering the motor.⑤Adopting semi-vortex makes the size of solids that pass through smaller
than the conventional full vortex, and the performance has improved tremendously.⑥Features limit load characteristics to prevent overload due to excessive
flow rate.⑦SVCA and SVCT are equipped with an automatic operation device, enables
automatic operation by a change in water level. SVCT conducts automatic alternate and parallel operations using 2 pumps.
■Standard specifications
Liquid to be lifted
Size of solid to pass through
Structure
Material
Motor
Cable
Mechanical seal
Lubricant
Flange standard
Coating
Motor Change of voltage
Cable … change of length
Lubricant … liquid paraffin includedOthers
■Standard accessories
■Special specifications
■Special accessories
●Drainage of polluted water including sewage and solids in sewage tank of a building
●Relay tank for wastewater from factory and industrial facility
●Raw water and wastewater from sewage/sewage treatment plant
●Community plant (combined treatment)
●Other treatment of drainage/sewage including solids
Liquid quality…Drainage/miscellaneous wastewater/sewage
Liquid temperature … 0 to 40 ºC, PH value: 5 to 9
Diameter … 60 to 70% or less of nominal diameter
Length … 400% or less of nominal diameter
Semi-vortex
Impeller … FC200
Spindle … 3.7kW or less SUS403
5.5kW or more SUS420J1
Casing … FC200
Type … Dry submerged
Power … Three-phase/200V
Synchronous rotation speed: 3000min-1
Protective device … Automatic return auto-cut
VCT × 4 cores
Double mechanical seal
Material: pump side – SiC~SiC
Motor side – Ceramic~Carbon
Turbine oil VG32
Nominal diameter 50 … Dedicated flange
Nominal diameter 65, 80 … JIS 10K thin flange or equivalent
Acrylic alkyd resin
Munsell 7.5R4/14
Cable …………………………………………………………………………10mMating flange (bolts, nuts and packing attached) ………………………1 setGround nameplate ………………………………………………………1 plate
Control panel ……………………………………In the case of non-automaticFree switch ………………………………………In the case of non-automaticRemovable device
■Model type description
50 SVC - 5 1.5 -S
①Nominal diameter (50mm)②Model SVC: non-automatic SVCA: automatic SVCT: automatic alternate and parallel operation③Frequency (50Hz)④Output (1.5kW)⑤Removable device Blank: None -C: with C-model removable device -S: with SEC-model removable device
① ② ③ ④ ⑤
SVC modelFor drainage/miscellaneous wastewater/sewageSemi-vortexDrain submersible pump
Cast iron
2
1.5
3.7
1.5
2.2
3.7
5.5
7.5
1.5
2.2
3.7
5.5
7.5
1.5
3.7
1.5
2.2
3.7
1.5
2.2
3.7
0.035 21.5 0.22 14.0
0.035 31.5 0.22 25.5
0.140 16.0 0.60 4.2
Non
-aut
omat
ic
0.140 17.0 0.75 6.0
0.140 23.5 0.90 11.0
0.140 29.0 0.90 16.0
0.140 35.0 0.90 22.5
0.140 16.0 0.60 4.2
0.140 17.0 0.75 6.0
0.140 23.5 0.90 11.0
0.140 29.0 0.90 16.0
0.140
0.035
0.035
0.140
0.140
0.140
0.140
0.140
0.140
35.0
21.5
31.5
16.0
17.0
23.5
16.0
17.0
23.5
0.90
0.220
0.220
0.600
0.750
0.900
0.600
0.750
0.900
22.5
14.0
25.5
4.2
6.0
11.0
4.2
6.0
11.0
■Selection chart
Ope
ratio
nm
etho
d
ModelOutput
kW
Specifications
Discharge ratem3/min
Total headm
Discharge ratem3/min
Total headm
■Specifications
(Note) If the discharge rate is 0.6m3/min or more, select it from the nominal diameter 80.
Discharge rate (m3/min)
50SVC-51.5
50SVC-53.7
65SVC-51.5
65SVC-52.2
65SVC-53.7
65SVC-55.5
65SVC-57.5
80SVC-51.5
80SVC-52.2
80SVC-53.7
80SVC-55.5
80SVC-57.5
50SVCA-51.5
50SVCA-53.7
65SVCA-51.5
65SVCA-52.2
65SVCA-53.7
80SVCA-51.5
80SVCA-52.2
80SVCA-53.7
※
※※
※※
The models with an “※” marked indicate special specification.
1.5 0.035 21.5 0.220 14.0
※ 3.7 0.035 31.5 0.220 25.5
1.5 0.140 16.0 0.600 4.2
※ 2.2 0.140 17.0 0.750 6.0
※ 3.7 0.140 23.5 0.900 11.0
1.5 0.140 16.0 0.600 4.2
※ 2.2 0.140 17.0 0.750 6.0
※ 3.7 0.140 23.5 0.900 11.0Auto
mati
c alte
rnate
and p
aralle
l ope
ration 50SVCT-51.5
50SVCT-53.7
65SVCT-51.5
65SVCT-52.2
65SVCT-53.7
80SVCT-51.5
80SVCT-52.2
80SVCT-53.7
50
65
80
Nominaldiameter
mm
Ope
ratio
nm
etho
d
ModelOutputkW×2
Specifications
Discharge ratem3/min
Total headm
Discharge ratem3/min
Total headm
Nominaldiameter
mm
50
65
80
50
65
80
〈50Hz〉Synchronous rate of rotation 3000min-14540
10
30
2.01.51.00.90.80.70.60.5
25
0.3 0.40.20.150.10.050.02
3
4
5
6
789
15
20
2
SVC-57.58065
SVC-55.58065
SVCTSVCA-52.2SVC
8065
SVC-57.58065
SVC-55.58065
SVCTSVCA-52.2SVC
8065SVCT
SVCA-51.5SVC
8065
80SVCT
65
SVC
SVCT50SVCA-51.5
50SVC-53.7
SVCTSVCA-51.5SVC
8065
80SVCT
65
SVC
SVCT50SVCA-51.5
50SVC-53.7
SVCSVCSVCA-53.7SVCA-53.7
Tota
l hea
d (m
)
Aut
omat
ic
■Motor specification list
Type Phase/voltageV
Pole numberP
Insulationclass
Presence ofprotective device
OutputkW
Rating Starting Cable
Method Type No. of coresCurrentA
CurrentA
Rotation (speed)min-1
Sizemm2
Lengthm
Finishing outer diametermm
1.52.23.75.57.5
DryDryDryDryDry
22222
200200200200200
6.59.615.621.529
28202865286028952900
Line startLine startLine startLine startLine start
3862.6109137194
EBFBB
HaveHaveHaveHaveHave
VCTVCTVCTVCTVCT
44444
1.251.25
23.53.5
1010101010
11.111.111.813.916.5
SVC model For drainage/miscellaneous wastewater/sewageSemi-vortex Drain submersible pump
Cast iron
3
■Assembly drawing●Non-automatic 50SVC-51.5 ●Non-automatic 65SVC-51.5、80SVC-51.5
65 65SVC-51.580SVC-51.5
1.5 184 210 392 36.580 1.5 179 245 432 37
Pump dimensionsA E F
Nominal diameterd
ModelOutput
kWApprox. mass
kg
■Dimensions (Unit: mm)
Rc2
77
121 264
130 95
190
Operational lowest water level
Approximate mass 27kg
Stopping water level after operation for 30 minutes or longer
Mating flange
φ50
21
2×φ1295
96
417
110
330
E
192
130
94
F
Operational lowest water level
Stopping water level after operation for 30 minutes or longer
φd
A
447
140
360
■Dimensions
50 3.7 183 510 140 115 221 413 229 125 404 482.2 199 527 140 120 220 428 239 175 434 50.53.7 199 547 140 120 220 428 239 175 457 59.5
655.5 201 626 160 132 241 461 264 190 570 877.5 201 626 160 132 241 461 264 190 570 922.2 194 527 140 120 255 468 239 175 434 513.7 194 547 140 120 255 468 239 175 457 60
805.5 196 626 160 132 276 501 264 190 570 887.5 196 626 160 132 276 501 264 190 570 93
Pump dimensions Operating water levelA B C D E F G WL1 WL2
Nominal diameterd
ModelOutput
kWApprox. mass
kg
■Assembly drawing●Non-automatic 50SVC-53.7・65SVC-52.2, 53.7, 55.5, 57.5・ 80SVC-52.2, 53.7, 55.5, 57.5
G
DE
F
C
B
Stopping water level after operation for 30 minutes or longer
Operational lowest water level
A
φd
WL1
WL2
(Unit: mm)
50SVC-53.765SVC-52.265SVC-53.765SVC-55.565SVC-57.580SVC-52.280SVC-53.780SVC-55.580SVC-57.5
☆Flange dimensions: JIS 10K thin flange or equivalent
☆Flange dimensions: JIS 10K thin flange or equivalent
SVC modelFor drainage/miscellaneous wastewater/sewageSemi-vortexDrain submersible pump
Cast iron
4
■Assembly drawing●Automatic (automatic alternate and parallel operation) 50SVCA(T)-51.5
Approximate mass 28kg (for one unit)
Set the operating water level for SVCT model to WL1<WL2<WL3<WL4<WL5 and make the difference in water level of each float 50mm or more.
Rc2
77
121
190
95130264
SVCA model/automatic
SVCT model/automatic alternate and parallel operation
Mating flange
Machine No.2 (SVCA)Machine No.1 (SVCT)
Stopping water level
Starting water level
WL1
WL4
Stopping water level
Starting water level
Simultaneous operating water level
WL2
WL3
WL5
96
475
φ50φ50
21
2×φ12
95
110min 160min
475
96
max 1090
max 790
max 890
■Assembly drawing
1.Set the operating water level for SVCT model to WL1<WL2<WL3<WL4<WL5 and make the difference in water level of each float 50mm or more.2.Approximate mass is for one unit.
●Automatic (automatic alternate and parallel operation) 65SVCA(T)-51.5・80SVCA(T)-51.5
65 1.5 184 505 130 94 210 392 192 140 190 820 920 1120 37.5
80 1.5 179 505 130 94 245 432 192 140 190 820 920 1120 38
Pump dimensions Operating water level
A B C D E F G WL1 WL2 WL3 WL4 WL5
Nominaldiameter
dModel
OutputkW
Approx.mass
kg
■Dimensions(Unit: mm)
D
F
G
d
A
B
min WL2
Starting water level
Stopping water level
Simultaneous operating water level
Starting water level
Stopping water level
Machine No.2 (SVCA)Machine No.1 (SVCT)
B
A
C
E
d
min WL1
max WL4
max WL5
max WL3
SVCA model/automatic
SVCT model/automatic alternate and parallel operation
65SVCA(T)-51.5
80SVCA(T)-51.5
☆Flange dimensions: JIS 10K thin flange or equivalent
SVC model For drainage/miscellaneous wastewater/sewageSemi-vortex Drain submersible pump
Cast iron
5
■Assembly drawing●Non-automatic with S-model removable device 50SVC-51.5-S
■Parts listNo. Part name Qty Materials
1 Discharge pipe 1 FC200
2 Sliding guide 1 FCD450
3 Mating flange 1 FC200
4 Pipe supporter 1 FCD450
5 Foundation bolt 2 SS400
6 Balance chain 1 SS400
7 Hanging chain 6m SS400
451
364
140
190
Maximum diameter φ340
3
24
7 6
5
1
2×φ11
77
Rc2
121
Pipe supporter
40
Mating flange
Operational lowest water level
Stopping water level after operation for 30 minutes or longer
20M12
250
130
Hole for mounting bolt M12
150
200
70 200 9560
Guide pipe mounting screw Rp1
60(Special accessory)Guide pipe 25A
215
55
180
150
35130
φ50
21
95
Approximate lifting mass 35kg
524 307 188 380 197 437 52.5569 343 239 413 217 463 64.5589 343 239 413 217 483 70.5666 376 264 444 230 610 93666 376 264 444 230 610 98524 307 188 380 197 437 53569 343 239 413 217 463 65584 343 239 413 217 483 71666 376 264 444 230 610 94666 376 264 444 230 610 99
1.52.2
65 3.75.57.51.52.2
80 3.75.57.5
■Assembly drawing●Non-automatic SVC model with C-model removable device 65SVC-C・80SVC-C
■Parts list
Pump dimensions Operating water level
B F G W WL1 WL2
Nominaldiameter
dModel Output
kW
Liftingmass
kg
■Dimensions (Unit: mm)
B
G
F
21
6
5
47
Hole for mounting bolt M12
Stopping water level after operation for 30 minutes or longer
Operational lowest water level
120 φd
25
WL2
WL1
88
280
170
Guide pipe mounting screw Rp1¼
Maximum diameter φW53
125
85
(Special accessory)Guide pipe 32A
M12
55
250
Pipe supporter
40150224314
65SVC-51.5-C65SVC-52.2-C65SVC-53.7-C65SVC-55.5-C65SVC-57.5-C80SVC-51.5-C80SVC-52.2-C80SVC-53.7-C80SVC-55.5-C80SVC-57.5-C
Rc 2½Rc 3
φ65φ80
Mating flange
φ140
28
φ150φ185 φ175
28
8×φ15 4×φ15
No. Part name Qty Materials
1 Discharge pipe 1 FC200
2 Sliding guide 1 FCD450
3 Mating flange 1 FC200
4 Pipe supporter 1 FCD450
5 Foundation bolt 4 SS400
6 Balance chain 1 SS400
7 Hanging chain 6m SS400
SVC modelFor drainage/miscellaneous wastewater/sewageSemi-vortexDrain submersible pump
Cast iron
6
■Assembly drawing●Automatic (Automatic alternate and parallel operation) with S-model removable device 50SVCT(A)-51.5-S
■Parts list
Set the operating water level for SVCT model to WL1<WL2<WL3<WL4<WL5 and make the difference in water level of each float 50mm or more.Lifting mass 36kg (this is approximate mass for one unit.)
67
190
Maximum diameter φ340
24
5
1
SVCA model/automatic
SVCT model/automatic alternate and parallel operation
Pipe supporter
Machine No.2 (SVCA)Machine No.1 (SVCT)
Stopping water level
Starting water level
WL1
WL4
Mating flange
Simultaneous operating water level
Starting water level
Stopping water level
WL5
WL3
WL2
Guide pipe mounting screw Rp1130
13035
70 200 95
150
60
180
489
20
max 904
124
min
20
max 1104
40
M12
250
Hole for mounting bolt M12
150
200
60
(Special accessory)Guide pipe 25A
215
55
max 804
174
min
φ50
■Sectional drawing example●Automatic SVCA model
■Parts list
1 Casing 1 FC2002 Seal cover 1 FC2003 Impeller 1 FC2004 Impeller nut 1 SUS3045 Key 1 SUS420J16 Ball bearing 1 SUJ27 Ball bearing 1 SUJ28 Mechanical seal One set9 O-ring 1 NBR
10 Flat ring 1 NBR11 Plug 1 SUS30412 Supporting metal fitting 1 SUS30413 Float switch 2 −14 Float holder 2 ABS Resin15 Magnetic contactor 1 −16 Power relay 1 −17 Protector 1 −18 Trance 1 −19 Rotor 1 S4020 Stator 1 S4021 Motor frame 1 FC20022 Upper bracket 1 FC20023 Starter winding 1 Cu24 Motor bearing 1 SUS40325 Wave washer 1 SK5-CSP26 Lead wire 1 VCT27 Float bearer bar 1 PVC
SiC ~ SiCCeramic~Carbon
1
15
3
13
14
1227
4
1617
18 26
10
22
25
11
7
623
19
20
5
21
24
8
9
2
3
77
Rc 2
121
21
95
2×φ11
No. Part name Qty Materials
No. Part name Qty Materials
1 Discharge pipe 1 FC200
2 Sliding guide 1 FCD450
3 Mating flange 1 FC200
4 Pipe supporter 1 FCD450
5 Foundation bolt 2 SS400
6 Balance chain 1 SS400
7 Hanging chain 6m SS400
SVC model For drainage/miscellaneous wastewater/sewageSemi-vortex Drain submersible pump
Cast iron
7
E-CAT5-P-SVC-00-B
50Hz
Semi-vortex Submersible Pump
SVC
150 Moo 16 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 13160 Thailand Tel.+66-3522-0640 Fax.+66-3522-1259
No.285, Yuan Qu Road(N), Bei Qiao, Min Hang District, Shanghai 201109, China Tel.+86-21-6490-9128 Fax.+86-21-6490-9126
Room 1001, 10/F, Olympia Plaza, 255 King|s Road, North Point, Hong Kong Tel.+852-2571-0886 Fax.+852-2571-0619
Head Office 230, Moriwake, Miyuki-cho, Fukuyama-city, Hiroshima, 720-0003, Japan Tel.+81-84-955-1111 Fax.+81-84-955-5777