Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
력 산 업 기 술 기 Korea Electric Power Industry Code
SG 일반구조 Non Nuclear Safety Related
Structures
SGB 철근콘크리트구조Building Code Requirements for Structural Concrete
[ACI 318M : 2011 Edition, 일치/IDT]
[ACI is original publisher, the date of original publication is August 2011]
2 0 1 5년 2 0 1 5. 1 2 . 3 1 발행
2 0 1 5 E ditionI ssued on D ecemb er 3 1 , 2 0 1 5
KEPIC 정 책 원 회구 조 문 원 회
Board of KEPICStructural T/C
1
머 리 말
력산업기술기 (Korea Electric Power Industry
Code, 이하 약칭 “KEPIC”이라 한다)은 력설비에
사용하는 기술기 의 국산화를 목표로 정부의 정책
인 지원 하에 력산업계 자율 으로 개발하여
1995년 11월 최 로 발행한 이후 한 기 회
(Korea Electric Association, KEA, 이하 “ 회”라 한
다)에서 지속 으로 유지․보완하고 새로운 기술표
을 개발하고 있다.
KEPIC은 국내 력설비에 사용한 표 인 외국
의 표 을 참조하여 력설비 건설과 운 경험을 토
로 우리나라의 실정에 맞게 반 하 다. 참조표
의 기술 인 내용(개념․원리․수식․ 차 등)은 검
증된 사항에 한하여 수용하되 사용자의 이해가 용이
하도록 우리의 습에 따라 표 하 고, 제도 인 사
항은 국내 력산업계의 기술 수 과 내외 환경 요
인을 고려하여 새롭게 개발하 다. 한, 효율 인
운 리를 하여 KEPIC 고유의 구성 체계를 채택
하 다.
특히 2005년 부터는 국제무역기구(WTO)의 "무
역에 한 기술장벽(TBT)에 한 정"에 따라 국제
표 화기구(ISO)의 "국제표 의 국가/지역표 채
택에 한 가이드(ISO Guide 21)를 용하여 참조표
과의 부합 정도를 "동등(IDT)" 는 "수정(MOD)"
으로 표시하여 그 차이 을 분명히 하 다.
KEPIC은 정부 규제기 과 력산업계 산․학․연
Foreword
The Korean electric power industry autonomously
developed the Korea Electric Power Industry Code
(“KEPIC”) with political support from the government
with a view to creating domestic codes and standards
for electric power facilities. Since KEPIC was initially
issued in November 1995, the Korea Electric Association
(“KEA”) has consistently updated it, developing new
codes and standards.
KEPIC was referred to the major foreign codes and
standards which had been applied to domestic electric power
facilities and was developed in Korean contexts on the basis
of the experience in the construction and operation of electric
power facilities in Korea. KEPIC accepted the technical
requirements of referenced codes and standards (concepts,
principles, formulas, processes, etc.) only to the extent that
they were verified. KEPIC also expressed such technical
details according to Korean practices so as to facilitate the
understanding of users. In particular, administrative
requirements of KEPIC were newly developed in
consideration of the technical level of the domestic electric
power industry as well as the environment at home and
abroad. It furthermore adopted a unique structure to expedite
its efficient management and maintenance.
From 2005 edition of KEPIC, there have been marked "IDT
(identical)" or "MOD (modified)" as the harmonized situation
with reference standards in accordance with ISO/IEC Guide
21 "Adoption of International Standards to National or Regional
Standards" based on "the Agreement on technical Barriers
to Trade" of World Trade Organizatin (WTO).
KEPIC was developed based on consensus from the KEPIC
2
각 분야의 문가들이 자발 으로 참여하는 정책
원회, 분야별 문 원회․분과 원회와 실무그룹에
서 합의를 도출하여 개발하 으며, 각 참여자는 해당
기 의 특성에 따른 문성을 바탕으로 참여하 으
나 소속기 의 입장을 표하는 것은 아니다.
분야별 원회와 실무그룹은 해당 책임 범 내
에서 계획 이고 주기 인 활동을 통해 KEPIC의
사용상 문제 을 보완․개선하고, 련 산업계로부
터 새로운 표 의 개발이 요청될 때 이를 검토하고
개발할 책임이 있다. KEPIC 사용자는 사용과정에
서의 질의사항이나 오류사항에 해 회를 통해
해당 원회에 질의 는 수정을 요청할 수 있다.
KEPIC의 새로운 제․개정 사항들은 매년 추록으
로 발행하고, 매 5년마다 개정 을 발행하며, 해외
사용자의 이해를 돕기 하여 2010년 부터는 국내
용을 제외하고는 국 문 으로 발행하고 있다.
개정사항이 발생하지 않은 경우에도 개정 발행
시에는 해당 KEPIC의 유효성 확인을 한 검토가
이루어진다. KEPIC 련 원회에서 승인된 제․
개정사항들은 회의 정기 간행물이나 온라인 매체
에 의해 공지하여 일정 기간 동안 일반 사용자에게
사 에 검토하고 비할 수 있는 기회를 제공하게
되며, 이러한 KEPIC 제․개정사항들은 개정
는 추록의 발행 이 이라 하더라도 사업자 는 구
매자와 공 자가 상호 합의하는 경우 사용할 수 있
다. KEPIC의 각 개정 과 추록에 명시된 발행일로
부터 6개월이 경과한 후에는 련 법령이나 사용자
상호간에 특별히 정한 경우가 아니라면 최신의 개
정 과 추록을 사용하여야 한다.
용사례는 특정한 사례를 제시하여 해당
KEPIC 요건의 의미를 명확하게 할 필요가 있거나,
불충분한 요건을 보완하기 하여 새로운 요건이
policy committee, technical committees, sub-committees, and
working groups in which experts from the regulatory authority,
electric power industry, academia, and research institutes
participate autonomously. Each expert takes part in KEPIC
committees and working groups on the basis of expertise
but does not represent their own entities.
The committees and working groups are mandated to address
and rectify problems associated with the use of KEPIC through
planned and regular activities within the scope of their respective
responsibilities and to review any request from related industries
to develop new codes and standards and carry out such development.
Users of KEPIC may make inquiries or request modifications
to the committee concerned through KEA with regard to any
questions or errors that they confront in utilizing KEPIC.
Regarding KEPIC, new enactments and revisions are annually
issued as addenda, and published as editions every five years.
KEPIC has been bilingually issued in Korean and English from
2010 edition, except for the parts which are only used in Korea.
Concerning unrevised codes and standards, a review to reaffirm
the effectiveness of those codes and standards is performed
in publishing a revised edition. The newly developed and revised
KEPIC are notified to the public in periodicals or on-line media
by KEA for a certain period of time so that users may have
adequate time to examine and prepare for them. Such newly
developed and revised KEPIC may be used even prior to issuance
of a new edition or addenda in the event an owner or a purchaser
and a supplier agree to do so. Upon lapse of six months from
the issuance date specified in each revised edition and addenda
of KEPIC, the latest edition and addenda shall be used unless
otherwise provided in applicable regulations or agreed by and
among users.
Code cases are used when they are necessary to clarify the requirements
specified in KEPIC by presenting specific cases or when new requirements
are urgently needed in order to supplement insufficient requirements.
3
긴 히 요구되는 경우에 사용된다. 용사례는
련 원회의 승인 이후부터 사업자 는 구매자와
공 자가 상호 합의하여 사용할 수 있으며, 사용 시
에는 KEPIC과 동등한 효력을 갖는다. 사용자의 질
의에 해 해당 원회에서 제도 는 기술
에서 유권해석이나 답변의 형태로 제시하는 해석
서는 KEPIC 요건을 이해하고 단하는데 유용하게
사용할 수 있으나 KEPIC의 일부는 아니다.
KEPIC의 각 요건은 력설비의 안 성 확보를
통해 인명과 재산을 보호하고, 설비의 수명을 보장
하는 것을 목표로 하여 정한 여유를 고려하 으
며, 사업자․설계자․제조자․설치자․검사자 등
사용자의 요구에 최 한 부합시키고자 하 다.
KEPIC은 특정한 설계나 제품에 해 규정하는
것이 아니다. 한, 의도 으로 보수 인 한계를 규
정하여 설계 는 제품형태의 선정을 제한하지 않
는다. KEPIC을 사용하는 설계자는 객 으로 정
당하다고 인정되는 경우 KEPIC의 의도를 만족시키
는 범 내에서 더 엄격한 요건을 용할 수 있다.
KEPIC의 의미가 명확하지 않은 경우에는 응하
는 참조표 을 보조 인 수단으로 사용할 수 있으
며, 특정한 제품이나 역무에 있어 KEPIC과 다른 표
을 혼합하여 사용하는 경우에도 KEPIC의 요건이
축소되거나 완화되어서는 안 된다.
KEPIC에는 부록의 형태로 특정한 주제에 한
정보를 포함하는 임의요건이 포함되어 있다. 임의요
건은 KEPIC의 일부로서 함께 유지되며, 강제 인
의미로 표 되어 있는 경우에도 KEPIC 사용자의
임의 인 단에 따라 용 여부를 정할 수 있다.
An owner or a purchaser and a supplier may use code cases by mutual
agreement after their approval by the appropriate committee. When
put to use, code cases have the same binding effect as the requirements
of KEPIC. In response to inquiries from KEPIC users, the appropriate
committee lays out an interpretation in the form of an authoritative
interpretation or reply from an administrative or technical perspective.
Such interpretation may be useful in understanding and judging the
requirements of KEPIC but does not constitute a part of KEPIC.
Intended to protect human life and property by ensuring safety
of electric power facilities and guarantee the adequate longevity
of such facilities, each requirement specified in KEPIC allows
for reasonable discretion. Such requirement aims to meet, to the
utmost possible extent, the needs of users including owners,
designers, manufacturers, installers, and inspectors.
KEPIC does not provide for specific designs or products.
Neither does it restrict selection of designs or types of products
by intentionally imposing conservative limitations. Within
the scope satisfying the purpose of KEPIC, designers may
apply more conservative requirements to the extent that they
are deemed justifiable from an objective point of view.
In case the meaning of any requirement is unclear, the
equivalent referenced code and standard may be used to
clarify the meaning. Even when both KEPIC and other
codes and standards are applied to specific products or
services, the requirements under KEPIC shall not be reduced
or relaxed.
Each KEPIC includes non-mandatory guidance
containing information on specific themes in the form of
an appendix. Non-mandatory guidance is maintained as
part of KEPIC. Even though such guidance is explained
as if they are mandatory, KEPIC users may determine
whether to apply them or not at their own discretion.
4
KEPIC은 단 계 사용의 편의성을 도모하기 하
여 국제표 단 계․ 미단 계․미터단 계를 혼
용하 다. 각 KEPIC별로 해당 분야 국내 련 산업
에서 보편 으로 사용하고 있는 단 계를 우선 단
계로 설정하여 명시하고, 보조 단 계를 호 안에
병기하는 방법을 채택하 다. 단 계의 정립은
KEPIC의 기본 과제로서 향후 사용자의 혼선을 래
하지 않는 범 내에서 단 계 사용의 국제화 추세
에 부응하여 단계 으로 개선해 나갈 계획이다.
회는 KEPIC을 통하여 특정한 제품이나 설계,
역무 는 제조방법을 승인하거나 채택하지 않으
며, KEPIC의 사용과정에서 발생할 수 있는 련 조
직간 계약 인 분쟁 사항에 해서 조정의 책임과
의무를 가지지 않는다.
KEPIC 상징기호는 회만이 사용할 수 있다. 다
만, 특정 분야에 있어 해당 KEPIC 요건에 따라
회로부터 자격을 인정받은 조직은 각인 는 회
에서 수락한 방법으로 KEPIC 상징기호를 사용하는
것이 허용된다.
KEPIC 요건의 이행을 하여 필요한 경우 해당
KEPIC을 승인한 원회의 결정으로 별도의 세부
규정이나 지침을 개발하여 운 한다. 이러한 규정
이나 지침은 공정성과 투명성을 보장하여야 하며,
KEPIC의 용과 이행에 한 구체 인 단기 으
로 활용할 수 있다.
회는 KEPIC을 개발하고 운 함에 있어 조약을
수하고 국제 행을 존 한다. 특정한 조직이
나 개인의 입장에 치우치지 않고 어느 한 편을 비
호하거나 배제하지 않으며, 국내외 모든 KEPIC 사
용자에게 동등한 여건과 기회를 제공함으로써 력
산업의 건 한 육성과 발 을 도모한다.
In order to provide convenience in use of unit systems,
KEPIC adopts not only the SI Unit, but also the US
Customary Unit (ft-lb) and the MKS Unit. KEPIC clearly
states the unit systems universally used in related
domestic industries, with auxiliary unit systems specified
in parentheses. The standardization of the unit system
is a basic task for KEPIC. KEPIC is a planned unit
system in order to keep abreast of internationalization
in its use, to the extent that confusion among users
is not caused.
KEA does not endorse or adopt any specific product,
design, service, or manufacturing method through KEPIC.
Neither does KEA assume any liabilities or duties to mediate
any contractual dispute that may arise between organizations
in use of KEPIC.
KEA is the only party entitled to use KEPIC symbol.
Any organization that obtains certificate from KEA in
certain areas according to equivalent KEPIC requirements
is allowed to use the KEPIC symbol by stamping or any
other means permitted by KEA.
When necessary for implementation of KEPIC requirements,
detailed procedures or instructions may be separately formulated
and applied by a decision of the committee that approved equivalent
KEPIC. These procedures or instructions shall guarantee fairness
and transparency and may be used as a concrete yardstick in
making a decision pertaining to application of KEPIC.
In developing and applying KEPIC, KEA observes treaties and
respects international practices. It is not swayed by the interests of
a specific organization or individual, nor protects or excludes any
single entity. KEA aims to promote sound development of the electric
power industry by imposing the same conditions on and granting
equal opportunities to all KEPIC users in Korea and abroad.
KEPIC 2015년판 목록
(Publication Lists of KEPIC 2015 Edition)
Publication Lists of KEPIC 2015 Addenda
Tech.Group Sub-Group
DescriptionsVol. No
I.D. Title
MMecha-
nical
MGMechanical -
General
MGE Piping M-25MGF Pumps M-26MGG Valves M-27MGH Condensers M-28MGI Closed Feedwater Heaters M-29MGJ Deaerators M-30
MBBoilers
MBB BoilersM-31MBC Recommended Guidelines for the
Care of Power BoilersMT
Turbine/Generater
MTG Turbines/Generaters M-32
MCCranes
MCF Fossil Power Plant Cranes M-33MCN Cranes for Nuclear Facilities M-34
MDMaterials
MDF Ferrous Materials M-35MDN Nonferrous Materials M-36MDW Welding Materials M-37MDP
(Costomary)Material Properties(English unit) M-38
MDP(Metric)
Material Properties(SI unit) M-39
MENondestructive Examination
MEN Nondestructive Examination M-40
MPPerformance
Test
MPT-1 General Instruction M-41MPT-2 Definitions and ValuesMPT-4 Fired Steam Generators M-42
MPT-4.2 Coal Pulverzers M-43MPT-4.3 Air Heater M-44MPT-4.4 Heat Recovery Steam Generators M-45MPT-6 Steam Turbines M-46
MPT-6.2 Steam Turbines in Combined Cycles M-47MPT-12.1 Closed Feedwater Heaters M-48MPT-12.3 Deaerators M-49MPT-19.2 Pressure Measurement M-50MPT-19.3 Temperautre Measurement M-51MPT-19.5 Flow measurement M-52MPT-22 Gas Turbines M-53
MPT-30.1 Air-Cooled Steam Condensers M-54MPT-46 Overall Plant Performance M-55
MQWelding
MQG General RequirementsM-56MQW Welding Qualification
MQB Brazing QualificationMQF Plastic Fusing
MMMaintenance
MMB Guidelines for Pressure Boundary Bolted Flange Joint Assembly M-57
MMR Repair of Pressure Equipment and Piping M-58
MML Guidelines for Life Assessment M-59
MMI Inspection Planning Using Risk-Based Method
M-60MMI-1 Inspection Planing Using Risk-Based Methods - Boiler/Piping
MMI-2 Inspection Planning Using Risk-Based Methods-Turbine
MMF-1 Fitness for Service M-61
EElectri-
calandI&C
ENNuclear
ElectricalandI&C
ENA General Requirements E-1ENB Design E-2
~E-6END Equipment Qualification E-7
~E-8ENE Installation E-9ENF Test and Inspection E-10
EMMeasuring
&Control
Equipment
EMA General Requirements E-11EMB Measuring Equipment E-12
~E-16EMC Transducing and Control
EquipmentE-17~E-23
EMD Indicating and Recording Equipment
E-24~E-25
EME Process Control and Computer System for Monitoring
E-26~E-29
EMFMeasuring Method of Process Variables and Process Control General
E-30~E-31
EMG Smart Grid Power System and Control
E-32~E-34
EMS Measuring & Control Equipment E-35~E-38
Tech.Group Sub-Group Descriptions Vol. NoI.D. Title
QQuality
QAQuality
Assurance
QAP Nuclear Quality Assurance
Q-1
QAI Authorized InspectionQAR Registered Professional Engineers
QAOManagerial, Administrative, and Quality Assurance Controls for the Operational Phase of Nuclear Power Plants
MMecha-
nicalMN
Nuclear Mechanical
MNA General Requirements M-1MNB Class 1 Components M-2MNC Class 2 Components M-3MND Class 3 Components M-4MNE Class MC Components M-5MNF Supports M-6MNG Core Support Structures M-7MNH Class 1 Component in Elevated
Temperature Service M-8MNN High Temperature Reactors M-9
MNSContainments for Storage of Spent Nuclear Fuel and High Level Radioactive Material Waste(Class SC Storage Containments)
M-10
MNTContainments for Transportation of Spent Nuclear Fuel and High Level Radioactive Material and Waste (Class TC Transportation Containments)
M-11
MNZ Appendices M-12
MMecha-
nical
MIInservice Inspection
MIA General Requirements
M-13
MIB Class 1 ComponentsMIC Class 2 ComponentsMID Class 3 ComponentsMIE Class MC and Metallic Liners
ComponentsMIF SupportsMIL Concrete ComponentsMIZ Appendices
MOInservice
Test
MOA General Requirements
M-14
MOB Inservice Test of Pumps(Pre-2000 Plants)
MOC Inservice Test of ValvesMOD Inservice Test of Pressure
Relief DevicesMOE Inservice Test of Dynamic
RestraintsMOF Performance Test of Systems in
Nuclear Power PlantsMOG Vibration Test of Piping SystemsMOH Performance Test of PORV
AssembliesMOI Performance Test of Diesel Drive
AssembliesMOK Requirements for Thermal
Expansion Testing of Piping SystemMOL Vibration Monitoring of Rotationg
Equipment
MOMPrecervice and Periodic Performance Testing of Pneumatically and HydraulicallyOperated Valve Assemblies
MON Code Cases
M-15
MOP Testing of Electric Motor Operators on Valves
MOQ Loose Part MonitoringMOR Inservice Performance test of
Heat Exchangers MOS Reactor Coolant and Recirculation
Pump Condition MonitoringMOW Risk-Informed Inservice Testing
of ComponentsMOY Inservice Test of Pumps
(Post-2000 Plants)MOZ Pressure Relief Device
Performance Test
MFQualification
of Mechanical Equipment
MFA General Requirements
M-16MFB Qualification of Active Pump
AssembliesMFC Qualification of Active Valve
AssembliesMFD Qualification of Dynamic Restraints
MHNuclear Air
and Gas Treatment
MHA General Requirements M-17MHB Ventilation Air Cleaning and
Ventilation Air Conditioning M-18MHD Testing Procedures M-19
MHNIn-service Testing of Nuclear Air Treatment, Heating, Ventilating, and Air-Conditioning System
M-20
MGMechanical -
General
MGA General Requirements M-21MGB Pressure Vessels M-22MGC Heat Exchangers M-23MGD Storage Tanks M-24
KEPIC 2015년 판 목록
분류 분류소 분 류
권번호기 호 제 목
M기계
MG일반기계
MGE 배 M-25
MGF 펌 M-26
MGG 밸 M-27
MGH 복수기 M-28
MGI 수가열기 M-29
MGJ 탈기기 M-30
MB보일러
MBB 보일러M-31
MBC 보일러 운 정비 지침
MT터빈/발 기 MTG 터빈/발 기 M-32
MC크 인
MCF 화력발 소 크 인 M-33
MCN 원자력시설 크 인 M-34
MD재료
MDF 철강재료 M-35
MDN 비철 속재료 M-36
MDW 용 재료 M-37
MDP(Costomary)
허용응력(English unit)
M-38
MDP (Metric)
허용응력(SI unit) M-39
ME비 괴검사 MEN 비 괴검사 M-40
MP성능시험
MPT-1 성능시험-일반지침M-41
MPT-2 성능시험-용어정의 수치
MPT-4 보일러 성능시험 M-42
MPT-4.2 미분기 성능시험 M-43
MPT-4.3 공기 열기 성능시험 M-44
MPT-4.4 HRSG 성능시험 M-45
MPT-6 증기터빈 성능시험 M-46
MPT-6.2 복합사이클 증기터빈 성능시험 M-47
MPT-12.1 수가열기 성능시험 M-48
MPT-12.3 탈기기 성능시험 M-49
MPT-19.2 압력측정 M-50
MPT-19.3 온도측정 M-51
MPT-19.5 유량측정 M-52
MPT-22 가스터빈 성능시험 M-53
MPT-30.1 공랭식복수기 성능시험 M-54
MPT-46 발 랜트 성능시험 M-55
MQ용
MQG 용 -일반요건
M-56MQW 용 인정
MQB 경납땜 인정
MQF 라스틱 융착
MM유지정비
MMB 볼트체결형 랜지 조립지침 M-57
MMR 압력기기 배 정비 M-58
MML 수명평가 지침 M-59
MMI 험도기반 검사계획(RBI)
M-60MMI-1 험도기반 검사계획-보일러/배
MMI-2 험도기반 검사계획 - 터빈
MMF-1 사용 합성 평가 M-61
E기
EN원자력기 계측제어
ENA 일반요건 E-1
ENB 설계E-2~E-6
END 검증 E-7~E-8
ENE 설치 E-9
ENF 시험 검사 E-10
EM계측
제어기기
EMA 일반요건 E-11
EMB 계측기기 E-12~E-16
EMC 신호변환 제어기기E-17~E-23
EMD 지시 기록기기 E-24~E-25
EME공정제어 감시용 산기계통
E-26~E-29
EMF공정변수 측정방법 공정제어 일반
E-30~E-31
EMG 지능형 력계통 제어 E-32~E-34
EMS 계측 제어기기 보안 E-35~E-38
분류 분류소 분 류
권번호기 호 제 목
Q품질
QA품질보증
QAP 원자력 품질보증
Q-1QAI 공인검사
QAR 등록기술자
QAO 원자력 발 소 운 단계에서의 경 행정 품질보증 리
M기계
MN원자력 기계
MNA 원자력기계 일반요건 M-1
MNB 1등 기기 M-2
MNC 2등 기기 M-3
MND 3등 기기 M-4
MNE 속격납용기 M-5
MNF 지지물 M-6
MNG 노심지지 구조물 M-7
MNH 고온용 1등 기기 M-8
MNN 고온원자로 M-9
MNS사용후 핵연료 고 방사성 물질 장용 차폐용기(SC등 기기) M-10
MNT 사용후 핵연료 고 방사성 물질 장용 차폐용기(TC등 기기) M-11
MNZ 부록 M-12
MI원자력 발 소 가동 검사
MIA 일반요건
M-13
MIB 1등 기기 가동 검사
MIC 2등 기기 가동 검사
MID 3등 기기 가동 검사
MIE 속격납용기 속라이 가동 검사
MIF 지지물 가동 검사
MIL 콘크리트 격납용기 검사
MIZ 부록
MO원 가동 시험
MOA 일반요건
M-14
MOB 펌 가동 시험(2000년 이 건설허가 발 소)
MOC 밸 가동 시험
MOD 압력방출장치 가동 시험
MOE 방진기 가동 시험
MOF 원 계통 성능시험
MOG 배 진동시험
MOH 동력구동압력방출 밸 성능시험
MOI 디젤구동장치 가동 시험
MOK 배 계통 열팽창 시험
MOL 회 기기 진동감시
MOM공기 유압구동밸 집합체 가동 주기 성능시험
MON 용사례
M-15
MOP 모터구동기 시험
MOQ 속 편감시
MOR 열교환기 가동 성능시험
MOS 원자로 냉각재펌 상태감시
MOW 리스크정보 활용 가동 시험
MOY펌 가동 시험(2000년 이후 건설허가 발 소)
MOZ 압력방출장치 성능시험
MF원 기계기기 성능검증
MFA 원 기계기기 성능 검증 일반요건
M-16MFB 능동펌 조립품의 성능검증
MFC 능동밸 조립품의 성능검증
MFD 동 구조물의 성능검증
MH공조기기
MHA 공조기기 일반요건 M-17
MHB 공기정화 공기조화 M-18
MHD 공조기기 시험 차 M-19
MHN원자력 공기조화 공기정화 계통 가동 시험
M-20
MG일반기계
MGA 일반요건 M-21
MGB 압력용기 M-22
MGC 열교환기 M-23
MGD 장탱크 M-24
Publication Lists of KEPIC 2015 Addenda(Continued)
Tech.Group Sub-Group Descriptions Vol. NoI.D. Title
FFire
FPFire
Protection
FPC-22 Water Tanks for Private Fire Protection F-9
FPC-24Standard for the installation of Private Fire Service Mains and Their Appurtenances
F-10
FPC-25Standard for the inspection, Testing, and Maintenance of Water -Based Fire Protection System
F-11
FPC-30 Flammable and Combustible Liquids Code F-12
FPC-51B Standard for Fire Prevention During Welding, Cutting, and Other Hot Work F-13
FPC-58 Life Pertroleum Gas Code F-14FPC-72 Fire Alarm Code F-15FPC-75 Standard for the Protection of
Information Technology Equipment F-16
FPC-80 Standard the Fire Doors and Other Opening Protectives F-17
FPC-80ARecommended Pratice for Protection of Buildings from Exterior Fire Exposures
F-18
FPC-90AStandard for the Installation of Air-Conditioning and Ventilating Systems
F-19
FPC-204 Standard for Smoke and Heat Venting F-20
FPC-220 Types of Building Construction F-21
FPC-252 Standard Method of Fire Tests for Door Assemblies F-22
FPC-600 Standard on Industrial Fire Brigades F-23
FPC-601 Security Services in Fire Loss Prevention F-24
FPC-701Standard Method of Fire Tests for Flame Propagation of Textiles and Films
F-25
FPC-750 Standard on Water Mist Fire Protection Systems F-26
FPC-1410 Training for Initial Emergency Scene Operations F-27
FPC-1620 Pre-indent Planning F-28
FPC-2001 Standard on Clean Agent Fire Extinguishing Systems F-29
FPN-801Standard for Fire Protection for Facilities Handling Radioactive Materials
F-30
FPN-803Standard for Fire Protection for Light Water Reactor Electric Generating Plants
F-31
FPN-804Standard for Fire Protection for Advanced Light Water Reactor Electric Generating Plants
F-32
FPN-805Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants
F-33
FPN-806Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants
F-34
GEnviron-mental
GGAir
Pollution
GGD-1 ESP Performance Test G-1
GGD-2 ESP Gas Flow Modeling Guideline G-2
GGN-1 Guideline for the Testing of DENOx Catalysts G-3
GGN-2 Guidelines for SCR Performance Diagnosis G-4
GGN-3 Guideline for the Evaluation of Regenerated DENOx catalysts G-5
GGS-1 FGD Equipment Issues Guidelines G-6GGS-2 FGD Troubleshooting Guide G-7
GGS-3 Guidelines for FGD Performance Diagnosis G-8
GSNoise/
Vibration
GSB Environmental Noise and Vibration G-9
GSC Noise and Vibration of Auxiliary Machinery for Power Plants G-10
GWWater-
treatment
GWB Operating Guidelines for Watertreatment Equipment G-11
GWC Chemical Cleaning Guidelines for Fossil Boilers G-12
GWD Cycle Chemistry Guidelines for Combined Cycle HRSGs G-13
KEPIC Code Cases and Interpretations C-1
Tech.Group Sub-Group Descriptions Vol. NoI.D. Title
EElectri-
calandI&C
EEElectric
Equipment
EEA General Requirements E-39EEB Rotating Equipment E-40
~E-44EEC Transformer E-45
~E-49EED Protection Equipment E-50
~E-56EEE Switchgear and Distribution Panel E-57
~E-63EEF Relay E-64
~E-67EEG Station Battery E-68
~E-69EEH Battery Charger E-70EEI High Voltage Equipment E-71EEK Cathodic Protection Facilities E-72EEL Uninterruptible Power Supplies E-73
ECCable
&Raceways
ECA General Requirements E-74ECB Electric Wires and Cables E-75
~E-80ECC Electric Wire Accessories E-81
~E-82ECD Raceway Supplies E-83
~E-88
ETTransmission, Transformation
& Distribution
ETA General Requirements E-89ETB Overheadline Raceway E-90
~E-93ETD Mechanical Apparatus E-94
~E-95ETE System Protection Apparatus &
Measuring Equipment E-96
SStructur
al
SNNuclearSafety
Related Structures
SNA General Requirements S-1SNB Concrete Containments S-2SNC Nuclear Safety-Related Concrete
Structures S-3
SND Safety-Related Steel Structures for Nuclear Facilities S-4
SNE Protective Coating for Nuclear Facilities S-5
SNG Steel-Plate Concrete Structure S-6SGNon
NuclearSafety
RelatedStructures
SGA General Requirements S-7SGB Building Code Requirements for
Structural Concrete S-8
SGE Code for Structural Steel Buildings S-9
STGeneral
StructuralProvisions
STA Minimum Design LoadsS-10STB Seismic Analysis and Seismic Capacity
Evaluation for Nuclear Facilities
SWStructural Welding
SWS Steel S-11SWT Sheet Steel S-12SWR Reinforcing Steel S-13SWL Stainless Steel S-14
NNuclear
NDDesign
ofN.P.P
NDA Design of N.P.P N-1NDB Safety Design of N.P.P N-2NDC Safety Analysis of N.P.P N-3NDD System Design of N.P.P N-4NDE Integration Test of N.P.P N-5NDF Reactor Physics N-6
NRRadiation Protection
NRB Radiation Protection Design N-7
NWRadioactive
Waste Control
NWB Design of Radioactive Waste System N-8
NWC Spent Fuel Storage Facility Design N-9
NWD Radioactive Waste Management N-10NF
Nuclear Fuel
NFA Nuclear Fuel of PWR N-11
NPPSA NPA Probabilistic safety Assessment N-12
FFire
FPFire
Protection
FPC-10 Standard for Portable Extinguishers F-1
FPC-11 Standard for Low-, Medium-, and High-Expansion Foam F-2
FPC-12 Standard on Carbon Dioxide Extinguishers Systems F-3
FPC-13 Standard for the installation of Sprinkler Systems F-4
FPC-14 Standard for the installation of Standpipe and Hose Systems F-5
FPC-15 Standard for Water Spray Fixed Systems for fire Protection F-6
FPC-16Standard for the Installation of Foam-Water Sprinkler and Foam-Water Spary Systems
F-7
FPC-20 Standard for the installation of Stationary Pumps for fire Protection F-8
KEPIC 2015년 판 목록(계속)
분류 분류소 분 류
권번호기 호 제 목
F화재
FP화재방호
FPC-22 소방용 물탱크 표 F-9
FPC-24사설 옥외소화 주배 부속장치 표 F-10
FPC-25 수계소화설비의 검, 시험 유지 리 표 F-11
FPC-30 인화 가연성 액체 기술기 F-12
FPC-51B 용 , 단 기타 고온작업 화재 방 표 F-13
FPC-58 액화석유가스 기 F-14
FPC-72 화재경보 기술기 F-15
FPC-75 정보기술 장비의 소방 표 F-16
FPC-80 건축물의 방화문 기타 개구부 보호에 한 표
F-17
FPC-80A외부의 화재 험에 노출된 건물을 방호하기 한 권장 실행기 F-18
FPC-90A 공조 환기 설비의 설치 표 F-19
FPC-204 연기 열 배출 표 F-20
FPC-220 건축물구조유형에 한 기술기 F-21
FPC-252 도어 어셈블리의 화재시험 표 방법 F-22
FPC-600 사업장 소방 표 F-23
FPC-601 화재손실 방을 한 보안업무 기술기 F-24
FPC-701사업장 소방 표 직물 필름의 화염 에 한 표 화재 시험 방법
F-25
FPC-750 미분무수 화재방호 계통 F-26
FPC-1410 비상 장 기작업 훈련을 한 기술기 F-27
FPC-1620 사 응계획 수립을 한 기술기
F-28
FPC-2001 청정소화약제 소화설비 표 F-29
FPN-801 방사성폐기물 취 시설 화재방호 표
F-30
FPN-803 경수로원 화재방호 표 F-31
FPN-804 개량형 경수로원 화재방호 표 F-32
FPN-805 경수로원 성능기반 화재방호 표 F-33
FPN-806 개량형원 화재방호 변경 성능기반 표 F-34
G환경
GG기
GGD-1 기집진기 성능시험 G-1
GGD-2 기집진기 가스유동 모델링 지침 G-2
GGN-1 배연 탈질 매 시험지침 G-3
GGN-2 배연탈질설비 성능진단 권장지침 G-4
GGN-3 배연탈질 재생 매 평가지침 G-5
GGS-1 배연탈황 주요기기 선정 권장지침 G-6
GGS-2 배연탈황설비 고장조치 지침 G-7
GGS-3 배연탈황설비 성능진단 지침 G-8
GS소음진동
GSB 환경소음과 진동 G-9
GSC 력 보조기기 소음과 진동 G-10
GW수질
GWB 수처리설비 운 지침 G-11
GWC 보일러 화학세정 지침 G-12
GWD HRSG 수질 리 지침 G-13
KEPIC 용사례 해석서 C-1
분류 분류소 분 류
권번호기 호 제 목
E기
EE기기기
EEA 일반요건 E-39
EEB 회 기기 E-40~E-44
EEC 변압기 E-45~E-49
EED 보호기기E-50~E-56
EEE 스 치기어 배 반 E-57~E-63
EEF 계 기 E-64~E-67
EEG 축 지E-68~E-69
EEH 충 기 E-70
EEI 고압기기 E-71
EEK 식방지설비 E-72
EEL 교류 무정 원장치 E-73
EC선
로용품
ECA 일반요건 E-74
ECB 선 이블 E-75~E-80
ECC 선 부속재E-81~E-82
ECD 로용품 E-83~E-88
ET송・변・배
ETA 일반요건 E-89
ETB 가공 선로 E-90~E-93
ETD 기계기구 E-94~E-95
ETE 보호설비 계측 E-96
S구조
SN원자력구조
SNA 원자력구조 일반요건 S-1
SNB 격납구조 S-2
SNC 철근콘크리트 구조 S-3
SND 강구조 S-4
SNE 방호도장 S-5
SNG 강 콘크리트구조 S-6
SG일반구조
SGA 일반구조 일반요건 S-7
SGB 철근콘크리트 구조 S-8
SGE 강구조 - 일반구조 S-9
ST구조총칙
STA 설계하S-10
STB 지진해석 내진성능 평가
SW구조용
SWS 구조용 - 강구조 S-11
SWT 구조용 - 박강 구조 S-12
SWR 구조용 - 철근 S-13
SWL 구조용 - 스테인리스강 S-14
N원자력
ND원 설계
NDA 원 설계 N-1
NDB 원 안 설계 N-2
NDC 원 안 분석 N-3
NDD 원 계통설계 N-4
NDE 원 종합시험 N-5
NDF 원자로물리 N-6
NR방사선방호
NRB 방사선 방호 설계 N-7
NW방사성 폐기물리
NWB 방사성폐기물 계통설계 N-8
NWC 사용후핵연료 장설비설계 N-9
NWD 방사성폐기물 운 N-10
NF핵연료 NFA 가압경수로용 핵연료 N-11
NP확률론 안 성평가
NPA 확률론 안 성평가 N-12
F화재
FP화재방호
FPC-10 소화기 표 F-1
FPC-11 ・ ・고팽창포 표 F-2
FPC-12 이산화탄소 소화설비 표 F-3
FPC-13 스 링클러 설비 설치 표 F-4
FPC-14 연결송수 호스설비 설치 표 F-5
FPC-15 고정식 물분무 소화설비 표 F-6
FPC-16 포워터스 링클러설비와 포워터스이설비의 설치 표 F-7
FPC-20 소방펌 표 F-8
KEPIC 정책위원회(KEPIC Policy Committee)
원 장 이 창 건(Lee, Chang-Kun)
Chairman
원 고 재 강(Ko, Jae-Gang)
Member 산업통상자원부(Ministry of Trade, Industry and Energy)
″박 성 (Park, Sung-Jun)
원자력안 원회(Nuclear Safety and Security Commission)
″최 환(Choi, Young-Hwan)
한국원자력안 기술원(Korea Institute of Nuclear Safety)
″배 성 환(Bae, Sung-Hwan)
한국 력공사(Korea Electric Power Corporation)
″한 상 길(Han, Sang-Gil)
한국수력원자력(주)(Korea Hydro & Nuclear Power Co., Ltd.)
″공 홍 탁(Kong, Hong-Tak)
한국남동발 (주)(Korea South-East Power Co., Ltd.)
″최 경 환(Choi, Gyeong-Hwan)
한국 부발 (주)(Korea Midland Power Co., Ltd.)
″김 종 선(Kim, Jong-Seon)
한국서부발 (주)(Korea Western Power Co., Ltd.)
″안 식(An, Kwan-Sik)
한국남부발 (주)(Korea Southern Power Co., Ltd.)
″김 상 철(Kim. Sang-Cheol)
한국동서발 (주)(Korea East-West Power Co., Ltd.)
″조 직 래(Jo, Jik-Lae)
한국 력기술(주)(KEPCO Engineering & Construction Co., Inc.)
″이 선 민(Lee, Sun-Min)
한 KPS(주)(KEPCO Plant Service & Engineering Co., Ltd.)
″송 종 규(Song, Jong-Gyu)
한국 기안 공사(Korea Electrical Safety Corporation)
KEPIC 개발참여자 명단(Participants of KEPIC development)
″이 동 수(Lee, Dong-Su)
두산 공업(주)(Doosan Heavy Industries & Construction Co., Ltd.)
″구 창 회(Koo, Chang-Hoe)
한 원자력연료(주)(KEPCO Nuclear Fuel Co., Ltd.)
″주 걸(Joo, Young-Keol)
공업(주)(Hyundai Heavy Industries Co., Ltd.)
″유 호 재(You, Ho-Jae)
(주)효성(Hyosung Corporation)
″정 기 화(Jeong, Gi-Hwa)
삼성물산(주)(Samsung C&T Corporation)
″유 홍 규(Yoo, Hong-Gyu)
(주) 우건설(Daewoo Engineering & Construction Co., Ltd.)
″ 종 갑(Cheon, Jong-Gap)
건설(주)(Hyundai Engineering & Construction Co., Ltd.)
″김 상 진(Kim, Sang-Jin)
두산 공업(주)(Doosan Heavy Industries & Construction Co., Ltd.)
″조 양 희(Joe, Yang-Hee)
인천 학교(University of Incheon)
″김 성 (Kim, Sung-Hyun)
고려 학교(Korea University)
″홍 순 찬(Hong, Soon-Chan)
단국 학교(Dankook University)
″하 동 명(Ha, Dong-Myeong)
세명 학교(Semyung University)
″손 갑 헌(Sohn, Gap-Heon)
한국 력기술(주)(KEPCO Engineering & Construction Co., Inc.)
″이 보 (Lee, Bo-Young)
한국항공 학교(Korea Aerospace University)
″이 재 기(Lee, Jai-Ki)
한양 학교(Hanyang University)
간 사 김 종 해(Kim, Jong-Hae)
Secretary 한 기 회(Korea Electric Association)
구조전문위원회(Technical Committee - Structural)
원 장 조 양 희(Joe, Yang-Hee)
Chairman 인천 학교(University of Incheon)
부 원장 윤 순 종(Yoon, Soon-Jong)
Vice chairman 홍익 학교(Hongik University)
원 김 환(Kim, Keung-Hwan)
Member 삼성물산(주)(Sam Sung Engineering & Construction)
″김 남 식(Kim, Nam-Sik)
부산 학교(Pusan National University)
″김 문 수(Kim, Moon-Soo)
원자력안 기술원(Korea Institute of Nuclear Safety)
″김 원 기(Kim, Won-Ki)
호서 학교(Hoseo University)
″김 철 호(Kim, Chul-Ho)
삼성물산(주)(Sam Sung Engineering & Construction)
″문 제 춘(Moon, Je-Choon)
한국도장인증기술 회(Korean Association of Coating Engineers)
″이 동 휘(Lee, Dong-Hwi)
한국수력원자력(주)(Korea Hydro & Nuclear Power Co., Ltd.)
″이 용 일(Lee, Yong-Il)
(주)제이스코리아(JACE Korea)
″최 기 원(Choi, Gi-Weon)
한국 력기술㈜(KEPCO Engineering & Construction Co., Inc.)
간 사 김 안 섭(Kim, Ansup)
Secretary 한 기 회(Korea Electric Association)
격납구조 및 콘크리트구조 분과위원회(Subcommittee - Containment Vessel & Concrete Structures)
원 장 김 환(Kim, Keung-Hwan)
Chairman 삼성물산(주)(Sam Sung Engineering & Construction)
부 원장 신 목(Shin, Hyun-Mock)
Vice chairman 성균 학교(Sungkyunkwan University)
원 김 상 윤(Kim, Sang-Yun)
Member 한국원자력안 기술원(Korea Institute of Nuclear Safety)
″김 호(Kim, Young-Ho)
한국 력기술(주)(KEPCO Engineering & Construction Co., Inc.)
″김 응 교(Kim, Eung-Kyo)
DSK엔지니어링(주)(DSK Engineering Co,. Ltd.)
″김 홍(Kim, Hong)
한국건설생활환경시험연구원(Korea Conformity Laboratories)
″문 일 환(Moon, Il-Hwan)
한국 력기술(주)(KEPCO Engineering & Construction Co., Inc.)
″박 지 홍(Park, Ji-Hong)
재료연구소(Korea Institute of Materials Science)
″방 창 (Bang, Chang-Joon)
한국수력원자력(주)(Korea Hydro & Nuclear Power Co., Ltd.)
″서 정 문(Seo, Jeong-Moon)
한국원자력연구원(Korea Atomic Energy Research Institute)
″송 창 국(Song, Chang-Gook)
한국수력원자력(주)(Korea Hydro & Nuclear Power Co., Ltd.)
″이 완 호(Lee, Wan-Ho)
한국 력기술(주)(KEPCO Engineering & Construction Co., Inc.)
″최 진 엽(Choi, Jin-Yup)
건설(주)(Hyundai Engineering & Construction)
간 사 이 종 은(Lee, Jong-Eun)
Secretary 한 기 회(Korea Electric Association)
ACI Committee 318(Structural Building Code)
<Voting Main Committee Members>
Chair : Randall W. Poston Secretary : Basile G. Rabbat
Sergio M. Alcocer Luis E. Garcia Jack P. Moehle Neal S. Anderson
Satyendra Ghosh Gustavo J. Parra-Montesinos Florian G. Barth Harry A. GleichJulio A. Ramirez Roger J. Becker David P. Gustafson David M. RogowskyKenneth B. Bondy James R. Harris David H. Sanders Dean A. BrowningTerence C. Holland Guillermo Santana James R. Cagley Shyh-Jiann HwangThomas C. Schaeffer Ned M. Cleland James O. Jirsa Stephen J. SeguirantW. Gene Corley Dominic J. Kelly Andrew W. Taylor Charles W. DolanGary J. Klein Eric M. Tolles Anthony E. Fiorato Ronald KlemencicJames K. Wight Catherine E. French Cary S. Kopczynski Sharon L. WoodRobert J. Frosch Colin L. Lobo Loring A. Wyllie, Jr. Paul F. Mlakar
<Voting Subcommittee Members>
F. Michael Bartlett Michael E. Kreger Lawrence C. Novak Raul D. Bertero
Jason J. Krohn Viral B. Patel Allan P. Bommer Daniel A. Kuchma
Conrad Paulson JoAnn P. Browning Andres Lepage Jose A. Pincheira
Nicholas J. Carino Raymond Lui Mario E. Rodríguez Ronald A. Cook
LeRoy A. Lutz Bruce W. Russell David Darwin Joseph Maffei
M. Saiid Saiidi Lisa R. Feldman Donald F. Meinheit Andrea J. Schokker
Kevin J. Folliard Fred Meyer John F. Stanton H.R. Trey Hamilton, III
Denis Mitchell Roberto Stark R. Doug Hooton Theodore A. MizeJohn W. Wallace Kenneth C. Hover Suzanne Dow Nakaki Steven H. KosmatkaTheodore L. Neff
<International Liaison Members>
Mathias Brewer Hector D. Hernandez Oscar M. Ramirez Josef Farbiarz
Angel E. Herrera Hector Monzon-Despang Fernando Reboucas Stucchi Luis B. Fargier-Gabaldon
Enrique Pasquel Fernando Yáñez Alberto Giovambattista Patricio A. Placencia
<Consulting Members>
John E. Breen H. S. Lew Robert F. Mast
Neil M. Hawkins James G. MacGregor Charles G. Salmon
SGB (2015 Ed.)
i
CONTENTS
SGB CHAPTER 1 GENERAL REQUIREMENTS ················································································ 1
SGB 1.1 Scope ························································································································································ 1
SGB 1.2 Contract documents ································································································································· 2
SGB 1.3 Inspection ················································································································································· 2
SGB 1.4 Approval of special systems of design or construction. ···································································· 3
SGB CHAPTER 2 NOTATION AND DEFINITIONS ········································································· 4
SGB 2.1 Code notation ·········································································································································· 4
SGB 2.2 Definitions. ············································································································································· 18
SGB CHAPTER 3 MATERIALS. ········································································································ 24
SGB 3.1 Tests of materials ································································································································· 24
SGB 3.2 Cementitious materials ·························································································································· 24
SGB 3.3 Aggregates ·············································································································································· 24
SGB 3.4 Water ······················································································································································ 25
SGB 3.5 Steel reinforcement ······························································································································· 25
SGB 3.6 Admixtures ············································································································································· 27
SGB 3.7 Storage of materials ······························································································································ 28
SGB 3.8 Referenced standards ···························································································································· 28
SGB CHAPTER 4 DURABILITY REQUIREMENTS ········································································ 31
SGB 4.1 General ··················································································································································· 31
SGB 4.2 Exposure categories and classes ·········································································································· 31
SGB 4.3 Requirements for concrete mixtures ··································································································· 32
SGB 4.4 Additional requirements for freezing-and-thawing exposure ···························································· 33
SGB 4.5 Alternative cementitious materials for sulfate exposure. ·································································· 34
SGB CHAPTER 5 CONCRETE QUALITY, MIXING, AND PLACING ········································ 35
SGB 5.1 General ··················································································································································· 35
SGB 5.2 Selection of concrete proportions ········································································································ 35
SGB 5.3 Proportioning on the basis of field experience or trial mixtures, or both ···································· 35
SGB 5.4 Proportioning without field experience or trial mixtures ································································· 37
SGB 5.5 Average compressive strength reduction ···························································································· 38
SGB 5.6 Evaluation and acceptance of concrete ······························································································ 38
SGB 5.7 Preparation of equipment and place of deposit ················································································ 40
SGB 5.8 Mixing ···················································································································································· 40
SGB (2015년 판)
i
목 차
SGB 1장 일반요건 ···································································································································· 1
SGB 1.1 적용범위 ··················································· ······························································· ································ 1
SGB 1.2 계약문서 ··················································· ······························································· ································ 2
SGB 1.3 검사 ····················································· ······························································· ······································ 2
SGB 1.4 특수한 설계 또는 시공방법에 대한 승인 ························································································ 3
SGB 2장 기호 및 용어 정의 ·················································································································· 4
SGB 2.1 기호 ····················································· ······························································· ······································ 4
SGB 2.2 용어 정의 ·················································· ······························································· ····························· 18
SGB 3장 재료 ·········································································································································· 24
SGB 3.1 재료의 시험 ················································· ······························································· ·························· 24
SGB 3.2 시멘트성 재료 ················································ ······························································· ······················· 24
SGB 3.3 골재 ····················································· ······························································· ···································· 24
SGB 3.4 물 ······················································ ······························································· ······································· 25
SGB 3.5 보강재 ···················································· ······························································· ································· 25
SGB 3.6 혼화재료 ··················································· ······························································· ······························ 27
SGB 3.7 재료의 보관 ················································· ······························································· ·························· 28
SGB 3.8 인용규격 ··················································· ······························································· ······························ 28
SGB 4장 내구성 요건 ···························································································································· 31
SGB 4.1 일반사항 ··················································· ······························································· ······························ 31
SGB 4.2 노출범주 및 등급 ·············································· ······························································· ··················· 31
SGB 4.3 콘크리트 배합에 대한 요건 ········································· ······························································· ······ 32
SGB 4.4 동결 및 융해 노출에 대한 추가요건 ···································· ·························································· 33
SGB 4.5 황산염 노출에 대한 대체 결합재 ···································································································· 34
SGB 5장 콘크리트의 품질, 비비기 및 타설 ····················································································· 35
SGB 5.1 일반사항 ··················································· ······························································· ······························ 35
SGB 5.2 콘크리트 배합의 선정 ············································ ······························································· ············· 35
SGB 5.3 현장경험이나 시험배합, 또는 두 가지 모두에 근거한 배합 ····················································· 35
SGB 5.4 현장경험 또는 시험배합 자료가 없는 배합 ································· ················································· 37
SGB 5.5 평균압축강도의 저감 ············································· ······························································· ·············· 38
SGB 5.6 콘크리트의 평가와 승인 ··········································· ······························································· ·········· 38
SGB 5.7 타설장비와 장소의 준비 ··········································· ······························································· ·········· 40
SGB 5.8 비비기 ···················································· ······························································· ································· 40
SGB (2015 Ed.)
ii
SGB 5.9 Conveying ·············································································································································· 41
SGB 5.10 Depositing. ··········································································································································· 41
SGB 5.11 Curing ··················································································································································· 41
SGB 5.12 Cold weather requirements ················································································································· 42
SGB 5.13 Hot weather requirements. ················································································································· 42
SGB CHAPTER 6 FORMWORK, EMBEDMENTS, AND CONSTRUCTION JOINTS ··············· 43
SGB 6.1 Design of formwork ····························································································································· 43
SGB 6.2 Removal of forms, shores, and reshoring ·························································································· 43
SGB 6.3 Embedments in concrete ······················································································································ 44
SGB 6.4 Construction joints ································································································································ 45
SGB CHAPTER 7 DETAILS OF REINFORCEMENT ······································································ 46
SGB 7.1 Standard hooks ······································································································································ 46
SGB 7.2 Minimum bend diameters ····················································································································· 46
SGB 7.3 Bending ·················································································································································· 46
SGB 7.4 Surface conditions of reinforcement ··································································································· 46
SGB 7.5 Placing reinforcement ··························································································································· 47
SGB 7.6 Spacing limits for reinforcement ········································································································· 47
SGB 7.7 Concrete protection for reinforcement ································································································ 48
SGB 7.8 Reinforcement details for columns ····································································································· 50
SGB 7.9 Connections ············································································································································ 51
SGB 7.10 Transverse reinforcement for compression members ······································································ 51
SGB 7.11 Transverse reinforcement for flexural members ·············································································· 53
SGB 7.12 Shrinkage and temperature reinforcement. ······················································································· 53
SGB 7.13 Requirements for structural integrity ································································································ 54
SGB CHAPTER 8 ANALYSIS AND DESIGN—GENERAL CONSIDERATIONS ······················· 56
SGB 8.1 Design methods ····································································································································· 56
SGB 8.2 Loading ·················································································································································· 56
SGB 8.3 Methods of analysis ······························································································································ 56
SGB 8.4 Redistribution of moments in continuous flexural members ··························································· 57
SGB 8.5 Modulus of elasticity ···························································································································· 57
SGB 8.6 Lightweight concrete ····························································································································· 57
SGB 8.7 Stiffness ·················································································································································· 58
SGB 8.8 Effective stiffness to determine lateral deflections ··········································································· 58
SGB 8.9 Span length ············································································································································ 58
SGB 8.10 Columns ··············································································································································· 58
SGB (2015년 판)
ii
SGB 5.9 운반 ····················································· ······························································· ···································· 41
SGB 5.10 타설 ···················································· ······························································· ·································· 41
SGB 5.11 양생 ···················································· ······························································· ·································· 41
SGB 5.12 한중 콘크리트의 요건 ··········································· ······························································· ··········· 42
SGB 5.13 서중 콘크리트의 요건 ··········································· ······························································· ··········· 42
SGB 6장 거푸집, 매입물 및 시공이음 ····························································································· 43
SGB 6.1 거푸집 설계 ················································· ······························································· ·························· 43
SGB 6.2 거푸집과 동바리의 해체 및 동바리 재설치 ································ ················································ 43
SGB 6.3 콘크리트의 매입물 ·············································· ······························································· ················· 44
SGB 6.4 시공이음 ··················································· ······························································· ······························ 45
SGB 7장 철근상세 ·································································································································· 46
SGB 7.1 표준갈고리 ·················································· ······························································· ··························· 46
SGB 7.2 최소 구부림 지름 ·············································· ······························································· ··················· 46
SGB 7.3 구부림 ···················································· ······························································· ································· 46
SGB 7.4 보강재의 표면조건 ·············································· ······························································· ················· 46
SGB 7.5 보강재 배근 ················································· ······························································· ·························· 47
SGB 7.6 철근의 간격제한 ··············································· ······························································· ···················· 47
SGB 7.7 보강재 보호를 위한 콘크리트 피복 ································································································ 48
SGB 7.8 기둥에 대한 철근상세 ············································ ······························································· ············· 50
SGB 7.9 연결부 ···················································· ······························································· ································· 51
SGB 7.10 압축부재의 횡보강철근 ··········································· ······························································· ········· 51
SGB 7.11 휨 부재의 횡보강철근 ··········································· ······························································· ··········· 53
SGB 7.12 수축 및 온도응력에 대한 보강재 ····································· ···························································· 53
SGB 7.13 구조물의 일체성 확보를 위한 요건 ···································· ························································· 54
SGB 8장 해석 및 설계 - 일반 고려사항 ························································································ 56
SGB 8.1 설계방법 ··················································· ······························································· ······························ 56
SGB 8.2 하중 ····················································· ······························································· ···································· 56
SGB 8.3 해석방법 ··················································· ······························································· ······························ 56
SGB 8.4 연속 휨 부재의 모멘트재분배 ········································ ······························································· ··· 57
SGB 8.5 탄성계수 ··················································· ······························································· ······························ 57
SGB 8.6 경량콘크리트 ················································· ······························································· ························ 57
SGB 8.7 강성 ····················································· ······························································· ···································· 58
SGB 8.8 횡방향변위를 결정하기 위한 유효강성 ···································· ······················································ 58
SGB 8.9 경간 ····················································· ······························································· ···································· 58
SGB 8.10 기둥 ···················································· ······························································· ·································· 58
SGB (2015 Ed.)
iii
SGB 8.11 Arrangement of live load ··················································································································· 59
SGB 8.12 T-beam construction ···························································································································· 59
SGB 8.13 Joist construction ································································································································· 59
SGB 8.14 Separate floor finish ··········································································································································· 60
SGB CHAPTER 9 STRENGTH AND SERVICEABILITY REQUIREMENTS ······························ 61
SGB 9.1 General ··················································································································································· 61
SGB 9.2 Required strength ·································································································································· 61
SGB 9.3 Design strength ······································································································································ 62
SGB 9.4 Design strength for reinforcement ······································································································· 63
SGB 9.5 Control of deflections ··························································································································· 63
SGB CHAPTER 10 FLEXURE AND AXIAL LOADS ····································································· 68
SGB 10.1 Scope ···················································································································································· 68
SGB 10.2 Design assumptions ····························································································································· 68
SGB 10.3 General principles and requirements ································································································· 68
SGB 10.4 Distance between lateral supports of flexural members ································································· 69
SGB 10.5 Minimum reinforcement of flexural members ················································································· 69
SGB 10.6 Distribution of flexural reinforcement in beams and one-way slabs ··········································· 70
SGB 10.7 Deep beams ········································································································································· 70
SGB 10.8 Design dimensions for compression members ················································································· 71
SGB 10.9 Limits for reinforcement of compression members ········································································ 71
SGB 10.10 Slenderness effects in compression members ················································································ 71
SGB 10.11 Axially loaded members supporting slab system ·········································································· 75
SGB 10.12 Transmission of column loads through floor system ··································································· 75
SGB 10.13 Composite compression members ···································································································· 75
SGB 10.14 Bearing strength. ······························································································································· 77
SGB CHAPTER 11 SHEAR AND TORSION ···················································································· 78
SGB 11.1 Shear strength ······································································································································ 78
SGB 11.2 Shear strength provided by concrete for nonprestressed members ··············································· 78
SGB 11.3 Shear strength provided by concrete for prestressed members ····················································· 79
SGB 11.4 Shear strength provided by shear reinforcement ············································································· 81
SGB 11.5 Design for torsion. ······························································································································ 83
SGB 11.6 Shear-friction ········································································································································ 86
SGB 11.7 Deep beams ········································································································································· 87
SGB 11.8 Provisions for brackets and corbels ·················································································································· 88
SGB 11.9 Provisions for walls ···························································································································· 89
SGB (2015년 판)
iii
SGB 8.11 활하중의 배치 ··············································· ······························································· ····················· 59
SGB 8.12 T형 보 구조 ··············································· ······························································· ························· 59
SGB 8.13 장선구조 ·················································· ······························································· ···························· 59
SGB 8.14 별도의 바닥마감 ·············································· ······························································· ·················· 60
SGB 9장 강도 및 사용성 요건 ············································································································ 61
SGB 9.1 일반사항 ··················································· ······························································· ······························ 61
SGB 9.2 소요강도 ··················································· ······························································· ······························ 61
SGB 9.3 설계강도 ··················································· ······························································· ······························ 62
SGB 9.4 보강재의 설계강도 ·············································· ······························································· ················· 63
SGB 9.5 처짐의 조절 ················································· ······························································· ·························· 63
SGB 10장 휨과 축방향하중 ·················································································································· 68
SGB 10.1 적용범위 ·················································· ······························································· ···························· 68
SGB 10.2 설계가정 ·················································· ······························································· ···························· 68
SGB 10.3 일반원칙 및 요건 ············································· ······························································· ················· 68
SGB 10.4 휨 부재의 횡방향 받침부간 거리 ····························································· ···································· 69
SGB 10.5 휨 부재의 최소철근량 ··········································· ······························································· ··········· 69
SGB 10.6 보와 1방향 슬래브의 휨 철근 배근 ··································· ·························································· 70
SGB 10.7 깊은 보 ······························································ ······························································· ·················· 70
SGB 10.8 압축부재의 설계치수 ············································ ······························································· ············ 71
SGB 10.9 압축부재의 철근제한 ············································ ······························································· ············ 71
SGB 10.10 압축부재의 세장효과 ··········································· ······························································· ··········· 71
SGB 10.11 슬래브구조를 지지하는 축방향하중을 받는 부재 ·························································· ········· 75
SGB 10.12 바닥구조를 통한 기둥하중의 전달 ···································· ························································· 75
SGB 10.13 합성압축부재 ··············································· ······························································· ····················· 75
SGB 10.14 지압강도 ················································· ······························································· ··························· 77
SGB 11장 전단과 비틀림 ······················································································································ 78
SGB 11.1 전단강도 ·················································· ······························································· ···························· 78
SGB 11.2 프리스트레스가 없는 부재에서 콘크리트가 부담하는 전단강도 ········································· 78
SGB 11.3 프리스트레스트 콘크리트 부재에서 콘크리트가 부담하는 전단강도 ··································· 79
SGB 11.4 전단철근이 부담하는 전단강도 ······································· ······························································ 81
SGB 11.5 비틀림 설계 ················································ ······························································· ························ 83
SGB 11.6 전단마찰 ·················································· ······························································· ···························· 86
SGB 11.7 깊은 보 ·················································· ······························································· ······························ 87
SGB 11.8 브래킷과 코벨에 대한 규정 ········································ ······························································· ···· 88
SGB 11.9 벽체에 대한 규정 ············································· ······························································· ················· 89
SGB (2015 Ed.)
iv
SGB 11.10 Transfer of moments to columns ···································································································· 90
SGB 11.11 Provisions for slabs and footings ··································································································· 90
SGB CHAPTER 12 DEVELOPMENT AND SPLICES OF REINFORCEMENT ··························· 95
SGB 12.1 Development of reinforcement—General ·························································································· 95
SGB 12.2 Development of deformed bars and deformed wire in tension ···················································· 95
SGB 12.3 Development of deformed bars and deformed wire in compression ··········································· 96
SGB 12.4 Development of bundled bars ··········································································································· 96
SGB 12.5 Development of standard hooks in tension ····················································································· 96
SGB 12.6 Development of headed and mechanically anchored deformed bars in tension ························· 97
SGB 12.7 Development of welded deformed wire reinforcement in tension ················································ 98
SGB 12.8 Development of welded plain wire reinforcement in tension ······················································· 98
SGB 12.9 Development of prestressing strand. ································································································· 98
SGB 12.10 Development of flexural reinforcement—General ········································································· 99
SGB 12.11 Development of positive moment reinforcement ··········································································· 99
SGB 12.12 Development of negative moment reinforcement ········································································ 100
SGB 12.13 Development of web reinforcement ······························································································ 100
SGB 12.14 Splices of reinforcement—General ································································································ 101
SGB 12.15 Splices of deformed bars and deformed wire in tension ·························································· 102
SGB 12.16 Splices of deformed bars in compression. ··················································································· 103
SGB 12.17 Splice requirements for columns ··································································································· 103
SGB 12.18 Splices of welded deformed wire reinforcement in tension ······················································ 104
SGB 12.19 Splices of welded plain wire reinforcement in tension ····························································· 104
SGB CHAPTER 13 TWO-WAY SLAB SYSTEMS ········································································· 105
SGB 13.1 Scope ·················································································································································· 105
SGB 13.2 General ··············································································································································· 105
SGB 13.3 Slab reinforcement ···························································································································· 105
SGB 13.4 Openings in slab systems ················································································································ 107
SGB 13.5 Design procedures ····························································································································· 108
SGB 13.6 Direct design method ······················································································································· 109
SGB 13.7 Equivalent frame method ················································································································· 113
SGB CHAPTER 14 WALLS ················································································································ 115
SGB 14.1 Scope ·················································································································································· 115
SGB 14.2 General ··············································································································································· 115
SGB 14.3 Minimum reinforcement. ·················································································································· 115
SGB 14.4 Walls designed as compression members. ····················································································· 116
SGB (2015년 판)
iv
SGB 11.10 기둥으로 전달되는 모멘트 ········································ ······························································· ···· 90
SGB 11.11 슬래브와 기초판에 대한 규정 ······································ ······························································· 90
SGB 12장 철근의 정착과 이음 ············································································································ 95
SGB 12.1 철근의 정착 - 일반사항 ········································· ······························································· ·········· 95
SGB 12.2 인장을 받는 이형철근 및 이형철선의 정착 ································ ··············································· 95
SGB 12.3 압축을 받는 이형철근 및 이형철선의 정착 ································ ··············································· 96
SGB 12.4 다발철근의 정착 ·············································· ······························································· ·················· 96
SGB 12.5 인장을 받는 표준갈고리의 정착 ······································ ····························································· 96
SGB 12.6 인장을 받는 확대머리 이형철근 및 기계적으로 고정되는 이형철근의 정착 ····················· 97
SGB 12.7 인장을 받는 이형용접철망의 정착 ····································· ·························································· 98
SGB 12.8 인장을 받는 원형용접철망의 정착 ····································· ·························································· 98
SGB 12.9 강연선의 정착 ··············································· ······························································· ····················· 98
SGB 12.10 휨 철근의 정착 - 일반사항 ······································ ······························································· ···· 99
SGB 12.11 정모멘트 철근의 정착 ·········································· ······························································· ·········· 99
SGB 12.12 부모멘트 철근의 정착 ·········································· ······························································· ········ 100
SGB 12.13 복부철근의 정착 ············································· ······························································· ··············· 100
SGB 12.14 철근의 이음 - 일반사항 ········································ ······························································· ······ 101
SGB 12.15 인장을 받는 이형철근 및 이형철선의 이음 ······························· ············································ 102
SGB 12.16 압축을 받는 이형철근의 이음 ······································ ····························································· 103
SGB 12.17 기둥철근의 이음 요건 ·········································· ······························································· ········ 103
SGB 12.18 인장을 받는 이형용접철망의 이음 ···································· ······················································· 104
SGB 12.19 인장을 받는 원형용접철망의 이음 ···································· ······················································· 104
SGB 13장 2방향 슬래브 ····················································································································· 105
SGB 13.1 적용범위 ·················································· ······························································· ·························· 105
SGB 13.2 일반사항 ·················································· ······························································· ·························· 105
SGB 13.3 슬래브의 철근 ··············································· ······························································· ··················· 105
SGB 13.4 슬래브 시스템의 개구부 ·········································· ······························································· ······ 107
SGB 13.5 설계절차 ·················································· ······························································· ·························· 108
SGB 13.6 직접설계법 ················································· ······························································· ······················· 109
SGB 13.7 등가골조법 ················································· ······························································· ······················· 113
SGB 14장 벽체 ····································································································································· 115
SGB 14.1 적용범위 ·················································· ······························································· ·························· 115
SGB 14.2 일반사항 ·················································· ······························································· ·························· 115
SGB 14.3 최소 철근 ················································· ······························································· ························· 115
SGB 14.4 압축부재로 설계하는 벽체 ········································· ······························································· ··· 116
SGB (2015 Ed.)
v
SGB 14.5 Empirical design method ·················································································································· 116
SGB 14.6 Nonbearing walls ······························································································································ 116
SGB 14.7 Walls as grade beams ······················································································································ 117
SGB 14.8 Alternative design of slender walls ································································································ 117
SGB CHAPTER 15 FOOTINGS ·········································································································· 119
SGB 15.1 Scope ·················································································································································· 119
SGB 15.2 Loads and reactions ·························································································································· 119
SGB 15.3 Footings supporting circular or regular polygon-shaped columns or pedestals ························· 119
SGB 15.4 Moment in footings ·························································································································· 119
SGB 15.5 Shear in footings ······························································································································ 120
SGB 15.6 Development of reinforcement in footings ···················································································· 120
SGB 15.7 Minimum footing depth ··················································································································· 120
SGB 15.8 Transfer of force at base of column, wall, or reinforced pedestal ············································ 120
SGB 15.9 Sloped or stepped footings ·············································································································· 121
SGB 15.10 Combined footings and mats ········································································································· 122
SGB CHAPTER 16 PRECAST CONCRETE ····················································································· 123
SGB 16.1 Scope ·················································································································································· 123
SGB 16.2 General ··············································································································································· 123
SGB 16.3 Distribution of forces among members ·························································································· 123
SGB 16.4 Member design ·································································································································· 123
SGB 16.5 Structural integrity ····························································································································· 124
SGB 16.6 Connection and bearing design ······································································································· 124
SGB 16.7 Items embedded after concrete placement ····················································································· 125
SGB 16.8 Marking and identification ··············································································································· 125
SGB 16.9 Handling ············································································································································· 125
SGB 16.10 Strength evaluation of precast construction ···························································································· 126
SGB CHAPTER 17 COMPOSITE CONCRETE FLEXURAL MEMBERS ··································· 127
SGB 17.1 Scope ·················································································································································· 127
SGB 17.2 General ··············································································································································· 127
SGB 17.3 Shoring ··············································································································································· 127
SGB 17.4 Vertical shear strength ······················································································································ 127
SGB 17.5 Horizontal shear strength ················································································································· 127
SGB 17.6 Ties for horizontal shear ·················································································································· 128
SGB CHAPTER 18 PRESTRESSED CONCRETE ············································································ 129
SGB 18.1 Scope ·················································································································································· 129
SGB (2015년 판)
v
SGB 14.5 경험설계법 ················································· ······························································· ······················· 116
SGB 14.6 비내력벽체 ················································· ······························································· ······················· 116
SGB 14.7 지중보로서의 벽체 ············································· ······························································· ············· 117
SGB 14.8 세장한 벽체의 설계 대안 ········································· ······························································· ····· 117
SGB 15장 기초판 ································································································································· 119
SGB 15.1 적용범위 ·················································· ······························································· ·························· 119
SGB 15.2 하중과 반력 ················································ ······························································· ······················ 119
SGB 15.3 원형이나 정다각형 기둥 또는 페데스탈을 지지하는 기초판 ··············································· 119
SGB 15.4 기초판의 휨 모멘트 ············································ ······························································· ············ 119
SGB 15.5 기초판의 전단 ··············································· ······························································· ··················· 120
SGB 15.6 기초판의 철근 정착 ············································ ······························································· ············ 120
SGB 15.7 기초판의 최소두께 ············································· ······························································· ············· 120
SGB 15.8 기둥, 벽체 또는 철근이 배근된 페데스탈 저면에서의 힘의 전달 ······································ 120
SGB 15.9 경사 또는 계단식 기초판 ········································· ······························································· ····· 121
SGB 15.10 복합기초와 전면기초 ··········································· ······························································· ········· 122
SGB 16장 프리캐스트 콘크리트 ······································································································· 123
SGB 16.1 적용범위 ·················································· ······························································· ·························· 123
SGB 16.2 일반사항 ·················································· ······························································· ·························· 123
SGB 16.3 부재 간의 하중분배 ············································ ······························································· ············ 123
SGB 16.4 부재 설계 ················································· ······························································· ························· 123
SGB 16.5 구조적 일체성 ··············································· ······························································· ··················· 124
SGB 16.6 연결 및 지압설계 ············································· ······························································· ··············· 124
SGB 16.7 콘크리트 타설 후의 매입물 설치 ····································· ·························································· 125
SGB 16.8 표식 및 식별 ··············································· ······························································· ····················· 125
SGB 16.9 취급 ···················································· ······························································· ································ 125
SGB 16.10 프리캐스트 구조의 강도 평가 ······································ ····························································· 126
SGB 17장 합성 콘크리트 휨 부재 ··································································································· 127
SGB 17.1 적용범위 ·················································· ······························································· ·························· 127
SGB 17.2 일반사항 ·················································· ······························································· ·························· 127
SGB 17.3 동바리 설치 ················································ ······························································· ······················ 127
SGB 17.4 수직전단강도 ················································ ······························································· ···················· 127
SGB 17.5 수평전단강도 ················································ ······························································· ···················· 127
SGB 17.6 수평전단보강 ················································ ······························································· ···················· 128
SGB 18장 프리스트레스트 콘크리트 ······························································································· 129
SGB 18.1 적용범위 ·················································· ······························································· ·························· 129
SGB (2015 Ed.)
vi
SGB 18.2 General ··············································································································································· 129
SGB 18.3 Design assumptions ··························································································································· 129
SGB 18.4 Serviceability requirements—Flexural members ············································································· 130
SGB 18.5 Permissible stresses in prestressing steel ······················································································· 130
SGB 18.6 Loss of prestress ······························································································································· 131
SGB 18.7 Flexural strength ································································································································ 131
SGB 18.8 Limits for reinforcement of flexural members ·············································································· 132
SGB 18.9 Minimum bonded reinforcement ······································································································ 132
SGB 18.10 Statically indeterminate structures ································································································· 133
SGB 18.11 Compression members—Combined flexure and axial loads ······················································ 134
SGB 18.12 Slab systems ···································································································································· 134
SGB 18.13 Post-tensioned tendon anchorage zones ························································································ 135
SGB 18.14 Design of anchorage zones for monostrand or single 16 ㎜ diameter bar tendons ·············· 137
SGB 18.15 Design of anchorage zones for multistrand tendons ·································································· 137
SGB 18.16 Corrosion protection for unbonded tendons ················································································· 138
SGB 18.17 Post-tensioning ducts ······················································································································· 138
SGB 18.18 Grout for bonded tendons ·············································································································· 138
SGB 18.19 Protection for prestressing steel ···································································································· 139
SGB 18.20 Application and measurement of prestressing force ··································································· 139
SGB 18.21 Post-tensioning anchorages and couplers ······················································································ 140
SGB 18.22 External post-tensioning ·················································································································· 140
SGB CHAPTER 19 SHELLS AND FOLDED PLATE MEMBERS ·············································· 141
SGB 19.1 Scope and definitions ······················································································································· 141
SGB 19.2 Analysis and design ·························································································································· 141
SGB 19.3 Design strength of materials ············································································································ 142
SGB 19.4 Shell reinforcement ··························································································································· 142
SGB 19.5 Construction ······································································································································· 143
SGB CHAPTER 20 STRENGTH EVALUATION OF EXISTING STRUCTURES ····················· 144
SGB 20.1 Strength evaluation—General ··········································································································· 144
SGB 20.2 Determination of required dimensions and material properties ··················································· 144
SGB 20.3 Load test procedure ·························································································································· 144
SGB 20.4 Loading criteria ································································································································· 145
SGB 20.5 Acceptance criteria ···························································································································· 145
SGB 20.6 Provision for lower load rating ······································································································· 146
SGB 20.7 Safety ·················································································································································· 146
SGB CHAPTER 21 EARTHQUAKE-RESISTANT STRUCTURES ················································ 147
SGB (2015년 판)
vi
SGB 18.2 일반요건 ·················································· ······························································· ·························· 129
SGB 18.3 설계 전제사항 ··············································· ······························································· ··················· 129
SGB 18.4 휨 부재의 사용성 요건 ·········································· ······························································· ········ 130
SGB 18.5 긴장재의 허용응력 ············································· ······························································· ············· 130
SGB 18.6 프리스트레스의 손실 ············································ ······························································· ·········· 131
SGB 18.7 휨 강도 ·················································· ······························································· ···························· 131
SGB 18.8 휨 부재의 보강재에 대한 제한 ······································ ····························································· 132
SGB 18.9 최소 부착식 보강재 ············································ ······························································· ············ 132
SGB 18.10 부정정 구조물 ·············································· ······························································· ·················· 133
SGB 18.11 휨과 축방향하중을 받는 압축부재 ···································· ······················································· 134
SGB 18.12 슬래브시스템 ··············································· ······························································· ··················· 134
SGB 18.13 포스트텐셔닝 텐던의 정착구역 ······································ ··························································· 135
SGB 18.14 단연선 또는 지름 16 mm의 단일 강봉 텐던에 대한 정착구역 설계 ················ ············· 137
SGB 18.15 다중연선 텐던에 대한 정착구역 설계 ····················································································· 137
SGB 18.16 비부착식 텐던의 부식방지 ········································ ······························································· ·· 138
SGB 18.17 포스트텐셔닝 덕트 ············································ ······························································· ············ 138
SGB 18.18 부착식 텐던에 대한 그라우트 ······································ ····························································· 138
SGB 18.19 긴장재의 보호 ·············································· ······························································· ·················· 139
SGB 18.20 프리스트레스 힘의 적용과 측정 ····································· ·························································· 139
SGB 18.21 포스트텐셔닝 정착장치와 연결장치 ···································· ····················································· 140
SGB 18.22 외부 포스트텐셔닝 ············································ ······························································· ············ 140
SGB 19장 쉘 및 절판부재 ················································································································· 141
SGB 19.1 적용범위와 정의 ·············································· ······························································· ················ 141
SGB 19.2 해석과 설계 ················································ ······························································· ······················ 141
SGB 19.3 재료의 설계강도 ·············································· ······························································· ················ 142
SGB 19.4 쉘 철근 ·················································· ······························································· ···························· 142
SGB 19.5 시공 ···················································· ······························································· ································ 143
SGB 20장 기존 구조물의 강도평가 ································································································· 144
SGB 20.1 강도평가 - 일반사항 ··········································· ······························································· ··········· 144
SGB 20.2 소요치수 및 재료특성의 결정 ······························································· ···································· 144
SGB 20.3 재하시험 절차 ··············································· ······························································· ··················· 144
SGB 20.4 재하기준 ·················································· ······························································· ·························· 145
SGB 20.5 허용기준 ·················································· ······························································· ·························· 145
SGB 20.6 낮은 하중수준에 대한 규정 ········································ ······························································· ·· 146
SGB 20.7 안전성 ··················································· ······························································· ····························· 146
SGB 21장 내진구조물 ························································································································· 147
SGB (2015 Ed.)
vii
SGB 21.1 General requirements ························································································································ 147
SGB 21.2 Ordinary moment frames ················································································································· 149
SGB 21.3 Intermediate moment frames ············································································································ 149
SGB 21.4 Intermediate precast structural walls ······························································································· 151
SGB 21.5 Flexural members of special moment frames ··············································································· 151
SGB 21.6 Special moment frame members subjected to bending and axial load ····································· 153
SGB 21.7 Joints of special moment frames ···································································································· 156
SGB 21.8 Special moment frames constructed using precast concrete ························································ 157
SGB 21.9 Special structural walls and coupling beams ················································································· 158
SGB 21.10 Special structural walls constructed using precast concrete ······················································· 162
SGB 21.11 Structural diaphragms and trusses ································································································· 162
SGB 21.12 Foundations ······································································································································ 165
SGB 21.13 Members not designated as part of the seismic-force-resisting system ·········································· 166
SGB CHAPTER 22 STRUCTURAL PLAIN CONCRETE ······························································ 168
SGB 22.1 Scope ·················································································································································· 168
SGB 22.2 Limitations ········································································································································· 168
SGB 22.3 Joints ·················································································································································· 168
SGB 22.4 Design method ·································································································································· 169
SGB 22.5 Strength design ·································································································································· 169
SGB 22.6 Walls ·················································································································································· 170
SGB 22.7 Footings ·············································································································································· 171
SGB 22.8 Pedestals ············································································································································· 171
SGB 22.9 Precast members ································································································································ 172
SGB 22.10 Plain concrete in earthquake-resisting structures ········································································· 172
SGB APPENDIX A STRUT-AND-TIE MODELS ············································································ 173
SGB A.1 Definitions ··········································································································································· 173
SGB A.2 Strut-and-tie model design procedure ······························································································ 173
SGB A.3 Strength of struts ······························································································································· 173
SGB A.4 Strength of ties ·································································································································· 174
SGB A.5 Strength of nodal zones ···················································································································· 175
SGB APPENDIX B ALTERNATIVE PROVISIONS FOR REINFORCED AND PRESTRESSED
CONCRETE FLEXURAL AND COMPRESSION MEMBERS ················· 176
SGB B.1 Scope ··················································································································································· 176
SGB APPENDIX C ALTERNATIVE LOAD AND STRENGTH REDUCTION FACTORS ······ 178
SGB C.9.1 Scope ················································································································································ 178
SGB (2015년 판)
vii
SGB 21.1 일반요건 ·················································· ······························································· ·························· 147
SGB 21.2 일반모멘트골조 ··············································· ······························································· ················· 149
SGB 21.3 중간모멘트골조 ··············································· ······························································· ················· 149
SGB 21.4 중간프리캐스트 구조벽체 ·········································· ······························································· ···· 151
SGB 21.5 특수모멘트골조의 휨 부재 ········································· ······························································· ··· 151
SGB 21.6 휨과 축방향하중을 받는 특수모멘트골조 부재 ······························· ········································ 153
SGB 21.7 특수모멘트골조의 접합부 ·········································· ······························································· ···· 156
SGB 21.8 프리캐스트 콘크리트를 사용한 특수모멘트골조 ······························· ······································ 157
SGB 21.9 특수구조벽체와 연결보 ··········································· ······························································· ······· 158
SGB 21.10 프리캐스트 콘크리트를 사용한 특수구조벽체 ······························· ········································ 162
SGB 21.11 구조 다이어프램 및 트러스 ······································· ······························································· · 162
SGB 21.12 기초 구조 ················································ ······························································· ························ 165
SGB 21.13 지진력저항시스템으로 지정되지 않은 부재 ································ ··········································· 166
SGB 22장 구조용 무근콘크리트 ······································································································· 168
SGB 22.1 적용범위 ·················································· ······························································· ·························· 168
SGB 22.2 제한사항 ·················································· ······························································· ·························· 168
SGB 22.3 이음 ···················································· ······························································· ································ 168
SGB 22.4 설계방법 ·················································· ······························································· ·························· 169
SGB 22.5 강도설계 ·················································· ······························································· ·························· 169
SGB 22.6 벽체 ···················································· ······························································· ································ 170
SGB 22.7 기초판 ··················································· ······························································· ····························· 171
SGB 22.8 페데스탈 ·················································· ······························································· ·························· 171
SGB 22.9 프리캐스트 부재 ·············································· ······························································· ················ 172
SGB 22.10 내진구조물의 무근콘크리트 ······································· ······························································ 172
SGB Appendix A 스트럿-타이 모델 ································································································ 173
SGB A.1 용어 정의 ·················································· ······························································· ·························· 173
SGB A.2 스트럿-타이 모델의 설계절차 ········································ ······························································· 173
SGB A.3 스트럿의 강도 ················································ ······························································· ···················· 173
SGB A.4 타이의 강도 ················································· ······························································· ······················· 174
SGB A.5 절점영역의 강도 ··············································· ······························································· ················· 175
SGB Appendix B 휨 및 압축을 받는 철근콘크리트 및 프리스트레스트 콘크리트 부재에
대한 대체설계 규정 ·························································································· 176
SGB B.1 적용범위 ··················································· ······························································· ··························· 176
SGB Appendix C 대체 하중계수 및 강도감소계수 ······································································ 178
SGB C.9.1 적용범위 ················································· ······························································· ·························· 178
SGB (2015 Ed.)
viii
SGB C.9.2 Required strength ····························································································································· 178
SGB C.9.3 Design strength ································································································································ 179
SGB APPENDIX D ANCHORING TO CONCRETE ······································································· 180
SGB D.1 Definitions ··········································································································································· 180
SGB D.2 Scope ··················································································································································· 182
SGB D.3 General requirements. ························································································································ 182
SGB D.4 General requirements for strength of anchors ················································································ 185
SGB D.5 Design requirements for tensile loading ·························································································· 188
SGB D.6 Design requirements for shear loading ···························································································· 193
SGB D.7 Interaction of tensile and shear forces ···························································································· 196
SGB D.8 Required edge distances, spacings, and thicknesses to preclude splitting failure ······················ 196
SGB D.9 Installation and inspection of anchors ····························································································· 197
TABLE
TABLE SGB 4.2.1 EXPOSURE CATEGORIES AND CLASSES ········································································ 31
TABLE SGB 4.3.1 REQUIREMENTS FOR CONCRETE BY EXPOSURE CLASS ············································· 32
TABLE SGB 4.4.1 TOTAL AIR CONTENT FOR CONCRETE EXPOSED TO CYCLES OF FREEZING AND THAWING··· 33
TABLE SGB 4.4.2 REQUIREMENTS FOR CONCRETE SUBJECT TO EXPOSURE CLASS F3 ····················· 33
TABLE SGB 4.5.1 REQUIREMENTS FOR ESTABLISHING SUITABILITY OF CEMENTITIOUS
MATERIALS COMBINATIONS EXPOSED TO WATER-SOLUBLE SULFATE ················ 34
TABLE SGB 5.3.1.2 MODIFICATION FACTOR FOR SAMPLE STANDARD DEVIATION
WHEN LESS THAN 30 TESTS ARE AVAILABLE ·························································· 36
TABLE SGB 5.3.2.1 REQUIRED AVERAGE COMPRESSIVE STRENGTH WHEN DATA ARE
AVAILABLE TO ESTABLISH A SAMPLE STANDARD DEVIATION ·························· 36
TABLE SGB 5.3.2.2 REQUIRED AVERAGE COMPRESSIVE STRENGTH WHEN DATA ARE
NOT AVAILABLE TO ESTABLISH A SAMPLE STANDARD DEVIATION ················ 37
TABLE SGB 7.2 MINIMUM DIAMETERS OF BEND ·························································································· 46
TABLE SGB 9.5.1 MINIMUM THICKNESS OF NONPRESTRESSED BEAMS OR
ONE-WAY SLABS UNLESS DEFLECTIONS ARE CALCULATED ··································· 64
TABLE SGB 9.5.2 MAXIMUM PERMISSIBLE COMPUTED DEFLECTIONS ···················································· 65
TABLE SGB 9.5.3 MINIMUM THICKNESS OF SLABS WITHOUT INTERIOR BEAMS ································ 65
TABLE SGB D.4.1.1 REQUIRED STRENGTH OF ANCHORS, EXCEPT AS NOTED IN SGB D.3.3 ·········· 186
FIGURE
FIGURE SGB 13.3.8 Minimum extensions for reinforcement in slabs without beams ································· 107
SGB (2015년 판)
viii
SGB C.9.2 소요강도 ················································· ······························································· ·························· 178
SGB C.9.3 설계강도 ················································· ······························································· ·························· 179
SGB Appendix D 콘크리트에 대한 앵커설계 ················································································ 180
SGB D.1 용어 정의 ·················································· ······························································· ·························· 180
SGB D.2 적용범위 ··················································· ······························································· ··························· 182
SGB D.3 일반요건 ··················································· ······························································· ··························· 182
SGB D.4 앵커의 강도에 대한 일반요건 ······································································································· 185
SGB D.5 인장하중에 대한 설계요건 ·········································· ······························································· ···· 188
SGB D.6 전단하중에 대한 설계요건 ·········································· ······························································· ···· 193
SGB D.7 인장력과 전단력의 상호작용 ········································· ······························································· · 196
SGB D.8 쪼갬파괴 방지를 위한 소요연단거리, 간격 및 두께 ································································ 196
SGB D.9 앵커의 설치 및 검사 ············································ ······························································· ············ 197
표
표 SGB 4.2.1 노출범주 및 등급 ·········································· ······························································· ················· 31
표 SGB 4.3.1 노출등급에 따른 콘크리트에 대한 요건 ······························· ··················································· 32
표 SGB 4.4.1 주기적인 동결 및 융해에 노출되는 콘크리트의 전체공기량 ·············································· 33
표 SGB 4.4.2 노출등급 F3 콘크리트에 대한 요건 ································ ·························································· 33
표 SGB 4.5.1 수용성 황산염에 노출되는 결합재 조합의 적합성 결정을 위한 요건 ······························ 34
표 SGB 5.3.1.2 시험이 30회 미만일 때 표본표준편차에 대한 보정계수 ··················································· 36
표 SGB 5.3.2.1 표본표준편차 결정에 필요한 자료가 있을 경우의 소요평균압축강도 ··························· 36
표 SGB 5.3.2.2 표본표준편차 결정에 필요한 자료가 없을 경우의 소요평균압축강도 ··························· 37
표 SGB 7.2 최소 구부림 지름 ············································ ······························································· ··················· 46
표 SGB 9.5.1 처짐을 계산하지 않는 보 또는 1방향 슬래브의 최소두께 ·················································· 64
표 SGB 9.5.2 계산상의 최대 허용처짐 ······································· ······························································· ········ 65
표 SGB 9.5.3 내부 보가 없는 슬래브의 최소두께 ································· ························································· 65
표 SGB D.4.1.1 앵커의 소요강도 (SGB D.3.3 관련 사항은 제외) ···························································· 186
그림
그림 SGB 13.3.8 보가 없는 슬래브에서 철근의 최소연장 ····························· ············································· 107
SGB (2015 Ed.)
ix
COMMENTARY
R1 GENERAL REQUIREMENTS ······································································································· 200
R1.1 Scope ··························································································································································· 200
R1.2 Contract documents ···································································································································· 203
R1.3 Inspection ···················································································································································· 204
R1.4 Approval of special systems of design or construction. ······································································· 205
R2 NOTATION AND DEFINITIONS ································································································· 207
R2.1 Code notation ············································································································································· 207
R2.2 Definitions. ·················································································································································· 208
R3 MATERIALS. ··································································································································· 212
R3.1 Tests of materials ······································································································································· 212
R3.2 Cementitious materials ······························································································································· 212
R3.3 Aggregates ··················································································································································· 212
R3.4 Water ··························································································································································· 212
R3.5 Steel reinforcement ····································································································································· 213
R3.6 Admixtures ·················································································································································· 216
R3.8 Referenced standards ·································································································································· 216
R4 DURABILITY REQUIREMENTS ·································································································· 217
R4.1 General ························································································································································ 217
R4.2 Exposure categories and classes ··············································································································· 217
R4.3 Requirements for concrete mixtures ········································································································· 218
R4.4 Additional requirements for freezing-and-thawing exposure ································································· 221
R4.5 Alternative cementitious materials for sulfate exposure. ······································································· 221
R5 CONCRETE QUALITY, MIXING, AND PLACING ································································· 222
R5.1 General ························································································································································ 222
R5.2 Selection of concrete proportions ············································································································· 222
R5.3 Proportioning on the basis of field experience or trial mixtures, or both ········································· 223
R5.4 Proportioning without field experience or trial mixtures ······································································ 226
R5.6 Evaluation and acceptance of concrete ··································································································· 226
R5.7 Preparation of equipment and place of deposit ····················································································· 229
R5.8 Mixing ························································································································································· 230
R5.9 Conveying ··················································································································································· 230
R5.10 Depositing. ················································································································································ 230
R5.11 Curing ························································································································································ 231
SGB (2015년 판)
ix
부록
R1 일반요건 ·········································································································································· 200
R1.1 적용범위 ······················································ ······························································· ······························· 200
R1.2 계약문서 ······················································ ······························································· ······························· 203
R1.3 검사 ························································ ······························································· ····································· 204
R1.4 특수한 설계 또는 시공방법에 대한 승인 ····································· ····················································· 205
R2 기호 및 용어 정의 ························································································································ 207
R2.1 기호 ························································ ······························································· ····································· 207
R2.2 용어 정의 ····················································· ······························································· ······························ 208
R3 재료 ·················································································································································· 212
R3.1 재료의 시험 ···················································· ······························································· ··························· 212
R3.2 시멘트성 재료 ··················································· ······························································· ························ 212
R3.3 골재 ························································ ······························································· ····································· 212
R3.4 물 ························································· ······························································· ········································ 212
R3.5 보강재 ······················································· ······························································· ·································· 213
R3.6 혼화재료 ······················································ ······························································· ······························· 216
R3.8 인용 규격 ····················································· ······························································· ······························ 216
R4 내구성 요건 ···································································································································· 217
R4.1 일반사항 ······················································ ······························································· ······························· 217
R4.2 노출범주 및 등급 ················································· ······························································· ···················· 217
R4.3 콘크리트 배합에 대한 요건 ············································ ······························································· ······· 218
R4.4 동결 및 융해 노출에 대한 추가요건 ······································· ··························································· 221
R4.5 황산염 노출에 대한 대체 결합재 ········································· ······························································· 221
R5 콘크리트의 품질, 비비기 및 타설 ······························································································ 222
R5.1 일반사항 ······················································ ······························································· ······························· 222
R5.2 콘크리트 배합의 선정 ··············································· ······························································· ·············· 222
R5.3 현장경험이나 시험배합 또는 두 가지 모두에 근거한 배합 ·························································· 223
R5.4 현장경험 또는 시험배합자료가 없는 배합 ····································· ··················································· 226
R5.6 콘크리트의 평가와 승인 ·············································· ······························································· ··········· 226
R5.7 타설장비와 장소의 준비 ·············································· ······························································· ··········· 229
R5.8 비비기 ······················································· ······························································· ·································· 230
R5.9 운반 ························································ ······························································· ····································· 230
R5.10 타설 ······················································· ······························································· ···································· 230
R5.11 양생 ······················································· ······························································· ···································· 231
SGB (2015 Ed.)
x
R5.12 Cold weather requirements ······················································································································ 231
R5.13 Hot weather requirements. ······················································································································ 231
R6 FORMWORK, EMBEDMENTS, AND CONSTRUCTION JOINTS ········································· 233
R6.1 Design of formwork ·································································································································· 233
R6.2 Removal of forms, shores, and reshoring ······························································································· 233
R6.3 Embedments in concrete ··························································································································· 234
R6.4 Construction joints ····································································································································· 234
R7 DETAILS OF REINFORCEMENT ································································································ 236
R7.1 Standard hooks ··········································································································································· 236
R7.2 Minimum bend diameters ·························································································································· 236
R7.3 Bending ······················································································································································· 236
R7.4 Surface conditions of reinforcement ········································································································ 237
R7.5 Placing reinforcement ································································································································· 237
R7.6 Spacing limits for reinforcement ·············································································································· 237
R7.7 Concrete protection for reinforcement ····································································································· 238
R7.8 Reinforcement details for columns ··········································································································· 240
R7.9 Connections ················································································································································· 240
R7.10 Transverse reinforcement for compression members ··········································································· 240
R7.11 Transverse reinforcement for flexural members ··················································································· 242
R7.12 Shrinkage and temperature reinforcement. ···························································································· 242
R7.13 Requirements for structural integrity ····································································································· 244
R8 ANALYSIS AND DESIGN—GENERAL CONSIDERATIONS ················································ 246
R8.1 Design methods ·········································································································································· 246
R8.2 Loading ························································································································································ 246
R8.3 Methods of analysis ··································································································································· 247
R8.4 Redistribution of moments in continuous flexural members ································································ 247
R8.5 Modulus of elasticity ································································································································· 248
R8.6 Lightweight concrete ·································································································································· 248
R8.7 Stiffness ······················································································································································· 249
R8.8 Effective stiffness to determine lateral deflections ················································································ 249
R8.9 Span length ················································································································································· 250
R8.10 Columns ···················································································································································· 250
R8.11 Arrangement of live load ························································································································ 250
R8.12 T-beam construction ································································································································· 251
R8.13 Joist construction ······································································································································ 251
SGB (2015년 판)
x
R5.12 한중 콘크리트의 요건 ·············································· ······························································· ············· 231
R5.13 서중 콘크리트의 요건 ·············································· ······························································· ············· 231
R6 거푸집, 매입물 및 시공이음 ······································································································· 233
R6.1 거푸집 설계 ···················································· ······························································· ··························· 233
R6.2 거푸집과 동바리의 해체 및 동바리 재설치 ··································· ················································· 233
R6.3 콘크리트의 매입물 ················································· ······························································· ·················· 234
R6.4 시공이음 ······················································ ······························································· ······························· 234
R7 철근상세 ·········································································································································· 236
R7.1 표준갈고리 ····················································· ······························································· ···························· 236
R7.2 최소 구부림 지름 ················································· ······························································· ···················· 236
R7.3 구부림 ······················································· ······························································· ·································· 236
R7.4 보강재의 표면조건 ················································· ······························································· ·················· 237
R7.5 보강재 배근 ···················································· ······························································· ··························· 237
R7.6 철근의 간격제한 ·················································· ······························································· ····················· 237
R7.7 보강재 보호를 위한 콘크리트 피복 ········································ ···························································· 238
R7.8 기둥에 대한 철근상세 ··············································· ······························································· ·············· 240
R7.9 연결부 ······················································· ······························································· ·································· 240
R7.10 압축부재의 횡보강철근 ·············································· ······························································· ··········· 240
R7.11 휨 부재의 횡보강철근 ·············································· ······························································· ············· 242
R7.12 수축 및 온도응력에 대한 보강재 ········································ ······························································ 242
R7.13 구조물의 일체성 확보를 위한 요건 ······································· ··························································· 244
R8 해석 및 설계 - 일반 고려사항 ··································································································· 246
R8.1 설계방법 ······················································ ······························································· ······························· 246
R8.2 하중 ························································ ······························································· ····································· 246
R8.3 해석방법 ······················································ ······························································· ······························· 247
R8.4 연속 휨 부재의 모멘트재분배 ·········································· ······························································· ··· 247
R8.5 탄성계수 ······················································ ······························································· ······························· 248
R8.6 경량콘크리트 ···················································· ······························································· ························· 248
R8.7 강성 ························································ ······························································· ····································· 249
R8.8 횡방향 변위를 결정하기 위한 유효강성 ······································ ······················································ 249
R8.9 경간 ························································ ······························································· ····································· 250
R8.10 기둥 ······················································· ······························································· ···································· 250
R8.11 활하중의 배치 ·················································· ······························································· ······················· 250
R8.12 T형 보 구조 ·················································· ······························································· ··························· 251
R8.13 장선구조 ····················································· ······························································· ······························ 251
SGB (2015 Ed.)
xi
R8.14 Separate floor finish ················································································································································· 251
R9 STRENGTH AND SERVICEABILITY REQUIREMENTS ························································ 252
R9.1 General ························································································································································ 252
R9.2 Required strength ······································································································································· 252
R9.3 Design strength ··········································································································································· 254
R9.4 Design strength for reinforcement ············································································································ 257
R9.5 Control of deflections ································································································································ 257
R10 FLEXURE AND AXIAL LOADS ······························································································ 261
R10.2 Design assumptions ·································································································································· 261
R10.3 General principles and requirements ······································································································ 262
R10.4 Distance between lateral supports of flexural members ······································································ 264
R10.5 Minimum reinforcement of flexural members ······················································································ 264
R10.6 Distribution of flexural reinforcement in beams and one-way slabs ················································· 265
R10.7 Deep beams ·············································································································································· 267
R10.8 Design dimensions for compression members ······················································································ 267
R10.9 Limits for reinforcement of compression members ············································································· 267
R10.10 Slenderness effects in compression members ····················································································· 268
R10.12 Transmission of column loads through floor system ········································································ 274
R10.13 Composite compression members ········································································································· 274
R10.14 Bearing strength. ···································································································································· 275
R11 SHEAR AND TORSION ·············································································································· 277
R11.1 Shear strength ··········································································································································· 277
R11.2 Shear strength provided by concrete for nonprestressed members ···················································· 279
R11.3 Shear strength provided by concrete for prestressed members ·························································· 280
R11.4 Shear strength provided by shear reinforcement ·················································································· 283
R11.5 Design for torsion. ··································································································································· 285
R11.6 Shear-friction ············································································································································· 293
R11.7 Deep beams ·············································································································································· 296
R11.8 Provisions for brackets and corbels ······················································································································· 297
R11.9 Provisions for walls ································································································································· 299
R11.10 Transfer of moments to columns ········································································································· 300
R11.11 Provisions for slabs and footings ········································································································· 300
R12 DEVELOPMENT AND SPLICES OF REINFORCEMENT ···················································· 310
R12.1 Development of reinforcement—General ······························································································· 310
R12.2 Development of deformed bars and deformed wire in tension ························································· 310
SGB (2015년 판)
xi
R8.14 별도의 바닥마감 ················································· ······························································· ···················· 251
R9 강도 및 사용성 요건 ···················································································································· 252
R9.1 일반사항 ······················································ ······························································· ······························· 252
R9.2 소요강도 ······················································ ······························································· ······························· 252
R9.3 설계강도 ······················································ ······························································· ······························· 254
R9.4 보강재의 설계강도 ················································· ······························································· ·················· 257
R9.5 처짐의 조절 ···················································· ······························································· ··························· 257
R10 휨과 축방향하중 ·························································································································· 261
R10.2 설계가정 ····················································· ······························································· ······························ 261
R10.3 일반원칙 및 요건 ················································ ······························································· ··················· 262
R10.4 휨 부재의 횡방향 받침부간 거리 ····························································· ········································· 264
R10.5 휨 부재의 최소철근량 ·············································· ······························································· ············· 264
R10.6 보와 1방향 슬래브의 휨 철근 배근 ······································ ···························································· 265
R10.7 깊은 보 ····················································· ······························································· ································ 267
R10.8 압축부재의 설계치수 ··············································· ······························································· ·············· 267
R10.9 압축부재의 철근제한 ··············································· ······························································· ·············· 267
R10.10 압축부재의 세장효과 ·············································· ······························································· ············· 268
R10.12 바닥구조를 통한 기둥하중의 전달 ······································· ··························································· 274
R10.13 합성압축부재 ·················································· ······························································· ······················· 274
R10.14 지압강도 ···················································· ······························································· ····························· 275
R11 전단과 비틀림 ······························································································································ 277
R11.1 전단강도 ····················································· ······························································· ······························ 277
R11.2 프리스트레스가 없는 부재에서 콘크리트가 부담하는 전단강도 ·························· ······················ 279
R11.3 프리스트레스트 부재에서 콘크리트가 부담하는 전단강도 ·························································· 280
R11.4 전단철근이 부담하는 전단강도 ·········································· ······························································· · 283
R11.5 비틀림 설계 ··················································· ······························································· ·························· 285
R11.6 전단마찰 ····················································· ······························································· ······························ 293
R11.7 깊은 보 ····················································· ······························································· ································ 296
R11.8 브래킷과 코벨에 대한 규정 ··········································· ······························································· ······ 297
R11.9 벽체에 대한 규정 ················································ ······························································· ··················· 299
R11.10 기둥으로 전달되는 모멘트 ··········································· ······························································· ······ 300
R11.11 슬래브와 기초판에 대한 규정 ········································· ······························································· ·· 300
R12 철근의 정착과 이음 ···················································································································· 310
R12.1 철근의 정착 - 일반사항 ············································ ······························································· ··········· 310
R12.2 인장을 받는 이형철근 및 이형철선의 정착 ··································· ················································· 310
SGB (2015 Ed.)
xii
R12.3 Development of deformed bars and deformed wire in compression ················································· 312
R12.4 Development of bundled bars ················································································································· 312
R12.5 Development of standard hooks in tension ·························································································· 313
R12.6 Development of headed and mechanically anchored deformed bars in tension ······························ 315
R12.7 Development of welded deformed wire reinforcement in tension ····················································· 317
R12.8 Development of welded plain wire reinforcement in tension ···························································· 318
R12.9 Development of prestressing strand. ······································································································ 318
R12.10 Development of flexural reinforcement—General ··············································································· 319
R12.11 Development of positive moment reinforcement ················································································ 321
R12.12 Development of negative moment reinforcement ··············································································· 323
R12.13 Development of web reinforcement ····································································································· 324
R12.14 Splices of reinforcement—General ······································································································· 326
R12.15 Splices of deformed bars and deformed wire in tension ································································· 327
R12.16 Splices of deformed bars in compression. ·························································································· 329
R12.17 Splice requirements for columns ·········································································································· 329
R12.18 Splices of welded deformed wire reinforcement in tension ····························································· 331
R12.19 Splices of welded plain wire reinforcement in tension ···································································· 331
R13 TWO-WAY SLAB SYSTEMS ····································································································· 333
R13.1 Scope ························································································································································· 333
R13.2 General ······················································································································································ 333
R13.3 Slab reinforcement ··································································································································· 334
R13.4 Openings in slab systems ······················································································································· 335
R13.5 Design procedures ···································································································································· 335
R13.6 Direct design method ······························································································································· 337
R13.7 Equivalent frame method ························································································································ 341
R14 WALLS ··········································································································································· 344
R14.1 Scope ························································································································································· 344
R14.2 General ······················································································································································ 344
R14.3 Minimum reinforcement. ·························································································································· 344
R14.5 Empirical design method ························································································································· 344
R14.8 Alternative design of slender walls ······································································································· 345
R15 FOOTINGS ····································································································································· 347
R15.1 Scope ························································································································································· 347
R15.2 Loads and reactions ································································································································· 347
R15.4 Moment in footings ································································································································· 347
SGB (2015년 판)
xii
R12.3 압축을 받는 이형철근 및 이형철선의 정착 ··································· ················································· 312
R12.4 다발철근의 정착 ················································· ······························································· ···················· 312
R12.5 인장을 받는 표준갈고리의 정착 ········································· ······························································· 313
R12.6 인장을 받는 확대머리 이형철근 및 기계적으로 고정되는 이형철근의 정착 ·························· 315
R12.7 인장을 받는 이형용접철망의 정착 ········································ ···························································· 317
R12.8 인장을 받는 원형용접철망의 정착 ········································ ···························································· 318
R12.9 강연선의 정착 ·················································· ······························································· ······················· 318
R12.10 휨 철근의 정착 - 일반사항 ········································· ······························································· ······ 319
R12.11 정모멘트 철근의 정착 ············································· ······························································· ············ 321
R12.12 부모멘트 철근의 정착 ············································· ······························································· ············ 323
R12.13 복부철근의 정착 ················································ ······························································· ··················· 324
R12.14 철근의 이음 - 일반사항 ··········································· ······························································· ·········· 326
R12.15 인장을 받는 이형철근 및 이형철선의 이음 ·································· ················································ 327
R12.16 압축을 받는 이형철근의 이음 ········································· ······························································· ·· 329
R12.17 기둥철근의 이음 요건 ············································· ······························································· ············ 329
R12.18 인장을 받는 이형용접철망의 이음 ······································· ··························································· 331
R12.19 인장을 받는 원형용접철망의 이음 ······································· ··························································· 331
R13 2방향 슬래브 ································································································································ 333
R13.1 적용 범위 ···················································· ······························································· ····························· 333
R13.2 일반사항 ····················································· ······························································· ······························ 333
R13.3 슬래브의 철근 ·················································· ······························································· ······················· 334
R13.4 슬래브시스템의 개구부 ·············································· ······························································· ··········· 335
R13.5 설계절차 ····················································· ······························································· ······························ 335
R13.6 직접설계법 ···················································· ······························································· ··························· 337
R13.7 등가골조법 ···················································· ······························································· ··························· 341
R14 벽체 ················································································································································ 344
R14.1 적용범위 ····················································· ······························································· ······························ 344
R14.2 일반사항 ····················································· ······························································· ······························ 344
R14.3 최소철근 ····················································· ······························································· ······························ 344
R14.5 경험설계법 ···················································· ······························································· ··························· 344
R14.8 세장한 벽체의 설계 대안 ············································ ······························································· ········· 345
R15 기초판 ············································································································································ 347
R15.1 적용 범위 ···················································· ······························································· ····························· 347
R15.2 하중과 반력 ··················································· ······························································· ·························· 347
R15.4 기초판의 휨모멘트 ················································ ······························································· ················· 347
SGB (2015 Ed.)
xiii
R15.5 Shear in footings ······································································································································ 348
R15.8 Transfer of force at base of column, wall, or reinforced pedestal ··················································· 348
R15.10 Combined footings and mats ················································································································ 350
R16 PRECAST CONCRETE ················································································································ 351
R16.1 Scope ························································································································································· 351
R16.2 General ······················································································································································ 351
R16.3 Distribution of forces among members ································································································· 351
R16.4 Member design ········································································································································· 352
R16.5 Structural integrity ···································································································································· 352
R16.6 Connection and bearing design ·············································································································· 354
R16.7 Items embedded after concrete placement ···························································································· 355
R16.9 Handling ···················································································································································· 355
R16.10 Strength evaluation of precast construction ···································································································· 355
R17 COMPOSITE CONCRETE FLEXURAL MEMBERS ······························································· 356
R17.1 Scope ························································································································································· 356
R17.2 General ······················································································································································ 356
R17.3 Shoring ······················································································································································ 356
R17.5 Horizontal shear strength ························································································································· 356
R17.6 Ties for horizontal shear ························································································································· 357
R18 PRESTRESSED CONCRETE ······································································································· 358
R18.1 Scope ························································································································································· 358
R18.2 General ······················································································································································ 359
R18.3 Design assumptions ·································································································································· 359
R18.4 Serviceability requirements—Flexural members ···················································································· 360
R18.5 Permissible stresses in prestressing steel ······························································································· 362
R18.6 Loss of prestress ······································································································································ 362
R18.7 Flexural strength ······································································································································· 363
R18.8 Limits for reinforcement of flexural members ····················································································· 364
R18.9 Minimum bonded reinforcement ············································································································· 364
R18.10 Statically indeterminate structures ········································································································ 365
R18.11 Compression members—Combined flexure and axial loads ····························································· 366
R18.12 Slab systems ··········································································································································· 366
R18.13 Post-tensioned tendon anchorage zones ······························································································· 367
R18.14 Design of anchorage zones for monostrand or single 16 ㎜ diameter bar tendons ····················· 371
R18.15 Design of anchorage zones for multistrand tendons ········································································· 372
SGB (2015년 판)
xiii
R15.5 기초판의 전단 ·················································· ······························································· ······················· 348
R15.8 기둥, 벽체 또는 철근이 배근된 페데스탈 저면에서의 힘의 전달 ············································· 348
R15.10 복합기초와 전면기초 ·············································· ······························································· ············· 350
R16 프리캐스트 콘크리트 ·················································································································· 351
R16.1 적용범위 ····················································· ······························································· ······························ 351
R16.2 일반사항 ····················································· ······························································· ······························ 351
R16.3 부재 간의 하중분배 ··············································· ······························································· ················ 351
R16.4 부재 설계 ···················································· ······························································· ····························· 352
R16.5 구조적 일체성 ·················································· ······························································· ······················· 352
R16.6 연결 및 지압설계 ················································ ······························································· ··················· 354
R16.7 콘크리트 타설 후의 매입물 설치 ······································· ····························································· 355
R16.9 취급 ······················································· ······························································· ···································· 355
R16.10 프리캐스트 구조의 강도평가 ·········································· ······························································· ··· 355
R17 합성 콘크리트 휨 부재 ·············································································································· 356
R17.1 적용범위 ····················································· ······························································· ······························ 356
R17.2 일반사항 ····················································· ······························································· ······························ 356
R17.3 동바리 설치 ··················································· ······························································· ·························· 356
R17.5 수평전단강도 ··················································· ······························································· ························ 356
R17.6 수평전단보강 ··················································· ······························································· ························ 357
R18 프리스트레스트 콘크리트 ·········································································································· 358
R18.1 적용범위 ····················································· ······························································· ······························ 358
R18.2 일반요건 ····················································· ······························································· ······························ 359
R18.3 설계 전제사항 ·················································· ······························································· ······················· 359
R18.4 휨 부재의 사용성 요건 ············································· ······························································· ············ 360
R18.5 긴장재의 허용응력 ················································ ······························································· ················· 362
R18.6 프리스트레스의 손실 ··············································· ······························································· ·············· 362
R18.7 휨 강도 ····················································· ······························································· ································ 363
R18.8 휨 부재의 보강재에 대한 제한 ········································· ······························································· ·· 364
R18.9 최소 부착식 보강재 ··············································· ······························································· ················ 364
R18.10 부정정 구조물 ················································· ······························································· ······················ 365
R18.11 휨과 축방향하중을 받는 압축부재 ······································· ··························································· 366
R18.12 슬래브시스템 ·················································· ······························································· ······················· 366
R18.13 포스트텐셔닝 텐던의 정착구역 ········································································································ 367
R18.14 단연선 또는 지름 16 mm의 단일강봉 텐던에 대한 정착구역 설계 ······································ 371
R18.15 다중연선 텐던에 대한 정착구역 설계 ····································· ······················································· 372
SGB (2015 Ed.)
xiv
R18.16 Corrosion protection for unbonded tendons ························································································ 372
R18.17 Post-tensioning ducts ······························································································································ 372
R18.18 Grout for bonded tendons ····················································································································· 372
R18.20 Application and measurement of prestressing force ·········································································· 373
R18.21 Post-tensioning anchorages and couplers ····························································································· 373
R18.22 External post-tensioning ························································································································· 374
R19 SHELLS AND FOLDED PLATE MEMBERS ·········································································· 375
R19.1 Scope and definitions ······························································································································ 375
R19.2 Analysis and design ································································································································· 376
R19.4 Shell reinforcement ·································································································································· 377
R19.5 Construction ·············································································································································· 379
R20 STRENGTH EVALUATION OF EXISTING STRUCTURES ················································· 380
R20.1 Strength evaluation—General ·················································································································· 380
R20.2 Determination of required dimensions and material properties ·························································· 381
R20.3 Load test procedure ································································································································· 381
R20.4 Loading criteria ········································································································································ 382
R20.5 Acceptance criteria ··································································································································· 382
R20.6 Provision for lower load rating ·············································································································· 383
R21 EARTHQUAKE-RESISTANT STRUCTURES ··········································································· 384
R21.1 General requirements ······························································································································· 384
R21.2 Ordinary moment frames ························································································································· 388
R21.3 Intermediate moment frames ··················································································································· 388
R21.4 Intermediate precast structural walls ······································································································ 391
R21.5 Flexural members of special moment frames ······················································································· 391
R21.6 Special moment frame members subjected to bending and axial load ············································· 395
R21.7 Joints of special moment frames ··········································································································· 398
R21.8 Special moment frames constructed using precast concrete ······························································· 400
R21.9 Special structural walls and coupling beams ························································································ 402
R21.10 Special structural walls constructed using precast concrete ······························································ 409
R21.11 Structural diaphragms and trusses ········································································································ 410
R21.12 Foundations ············································································································································· 413
R21.13 Members not designated as part of the seismic-force-resisting system ················································· 414
R22 STRUCTURAL PLAIN CONCRETE ·························································································· 417
R22.1 Scope ························································································································································· 417
R22.2 Limitations ················································································································································· 417
SGB (2015년 판)
xiv
R18.16 비부착식 텐던의 부식방지 ··········································· ······························································· ······ 372
R18.17 포스트텐셔닝 덕트 ··············································· ······························································· ················ 372
R18.18 부착식 텐던에 대한 그라우트 ········································· ······························································· ·· 372
R18.20 프리스트레스 힘의 적용과 측정 ········································ ······························································ 373
R18.21 포스트텐셔닝 정착장치와 연결 장치 ······································ ························································ 373
R18.22 외부 포스트텐셔닝 ··············································· ······························································· ················ 374
R19 쉘 및 절판부재 ···························································································································· 375
R19.1 적용범위와 정의 ················································· ······························································· ···················· 375
R19.2 해석과 설계 ··················································· ······························································· ·························· 376
R19.4 쉘 철근 ····················································· ······························································· ································ 377
R19.5 시공 ······················································· ······························································· ···································· 379
R20 기존 구조물의 강도 평가 ·········································································································· 380
R20.1 강도 평가 - 일반사항 ············································· ······························································· ·············· 380
R20.2 소요치수 및 재료특성의 결정 ········································· ······························································· ·· 381
R20.3 재하시험 절차 ·················································· ······························································· ······················· 381
R20.4 재하기준 ····················································· ······························································· ······························ 382
R20.5 허용기준 ····················································· ······························································· ······························ 382
R20.6 낮은 내하 수준에 대한 규정 ·········································· ······························································· ····· 383
R21 내진구조물 ···································································································································· 384
R21.1 일반요건 ····················································· ······························································· ······························ 384
R21.2 일반모멘트골조 ·················································· ······························································· ····················· 388
R21.3 중간모멘트골조 ·················································· ······························································· ····················· 388
R21.4 중간 프리캐스트 구조벽체 ············································ ······························································· ······· 391
R21.5 특수모멘트골조의 휨 부재 ············································ ······························································· ······· 391
R21.6 휨과 축방향하중을 받는 특수모멘트골조 부재 ·································· ············································ 395
R21.7 특수모멘트골조의 접합부 ············································· ······························································· ········ 398
R21.8 프리캐스트 콘크리트를 사용한 특수모멘트골조 ·································· ·········································· 400
R21.9 특수구조벽체와 연결보 ·············································· ······························································· ··········· 402
R21.10 프리캐스트 콘크리트를 사용한 특수구조벽체 ·································· ············································ 409
R21.11 구조 다이어프램 및 트러스 ·········································· ······························································· ····· 410
R21.12 기초 구조 ··················································· ······························································· ···························· 413
R21.13 지진력저항시스템으로 지정되지 않은 부재 ·················································································· 414
R22 구조용 무근콘크리트 ·················································································································· 417
R22.1 적용범위 ····················································· ······························································· ······························ 417
R22.2 제한사항 ····················································· ······························································· ······························ 417
SGB (2015 Ed.)
xv
R22.3 Joints ·························································································································································· 418
R22.4 Design method ·········································································································································· 418
R22.5 Strength design ········································································································································· 418
R22.6 Walls ·························································································································································· 419
R22.7 Footings ····················································································································································· 420
R22.8 Pedestals ···················································································································································· 420
R22.9 Precast members ······································································································································· 420
Appendix RA STRUT-AND-TIE MODELS ······················································································· 421
RA.1 Definitions ·················································································································································· 421
RA.2 Strut-and-tie model design procedure ····································································································· 426
RA.3 Strength of struts ······································································································································· 427
RA.4 Strength of ties ·········································································································································· 429
RA.5 Strength of nodal zones ··························································································································· 431
Appendix RB ALTERNATIVE PROVISIONS FOR REINFORCED AND PRESTRESSED
CONCRETE FLEXURAL AND COMPRESSION MEMBERS ······························ 432
RB.1—Scope ························································································································································ 432
Appendix RC ALTERNATIVE LOAD AND STRENGTH REDUCTION FACTORS ················· 437
RC.9.1 Scope ······················································································································································· 437
RC.9.2 Required strength ···································································································································· 437
RC.9.3 Design strength ······································································································································· 438
Appendix RD ANCHORING TO CONCRETE ·················································································· 440
RD.1 Definitions ·················································································································································· 440
RD.2 Scope ·························································································································································· 442
RD.3 General requirements. ······························································································································· 443
RD.4 General requirements for strength of anchors ······················································································· 447
RD.5 Design requirements for tensile loading ································································································· 451
RD.6 Design requirements for shear loading ··································································································· 461
RD.7 Interaction of tensile and shear forces ··································································································· 469
RD.8 Required edge distances, spacings, and thicknesses to preclude splitting failure ····························· 469
RD.9 Installation and inspection of anchors ···································································································· 470
REFERENCES ·························································································································· 473
SGB (2015년 판)
xv
R22.3 이음 ······················································· ······························································· ···································· 418
R22.4 설계방법 ····················································· ······························································· ······························ 418
R22.5 강도설계 ····················································· ······························································· ······························ 418
R22.6 벽체 ······················································· ······························································· ···································· 419
R22.7 기초판 ······················································ ······························································· ································· 420
R22.8 페데스탈 ····················································· ······························································· ······························ 420
R22.9 프리캐스트 부재 ················································· ······························································· ···················· 420
Appendix RA 스트럿-타이 모델 ······································································································· 421
RA.1 용어 정의 ····················································· ······························································· ······························ 421
RA.2 스트럿-타이 모델의 설계절차 ··········································· ······························································· ···· 426
RA.3 스트럿의 강도 ··················································· ······························································· ························ 427
RA.4 타이의 강도 ···················································· ······························································· ··························· 429
RA.5 절점영역의 강도 ·················································· ······························································· ····················· 431
Appendix RB 휨 및 압축을 받는 철근콘크리트 및 프리스트레스트 콘크리트 부재에 대한
대체설계 규정 ············································································································· 432
RB.1 적용범위 ······················································ ······························································· ······························· 432
Appendix RC 대체 하중계수 및 강도감소계수 ············································································· 437
RC.9.1 일반사항 ···················································· ······························································· ······························ 437
RC.9.2 소요강도 ···················································· ······························································· ······························ 437
RC.9.3 설계강도 ···················································· ······························································· ······························ 438
Appendix RD 콘크리트에 대한 앵커 설계 ····················································································· 440
RD.1 용어 정의 ····················································· ······························································· ······························ 440
RD.2 적용범위 ······················································ ······························································· ······························· 442
RD.3 일반요건 ······················································ ······························································· ······························· 443
RD.4 앵커의 강도에 대한 일반요건 ··········································· ······························································· ···· 447
RD.5 인장하중에 대한 설계요건 ············································· ······························································· ········ 451
RD.6 전단하중에 대한 설계요건 ············································· ······························································· ········ 461
RD.7 인장력과 전단력의 상호작용 ············································ ······························································· ····· 469
RD.8 쪼갬파괴 방지를 위한 소요연단거리, 간격 및 두께 ······································································· 469
RD.9 앵커의 시험 및 설치 ··············································· ······························································· ················ 470
참고문헌 ················································································································································· 473