Shimadzu_AutoTesting

7/28/2019 Shimadzu_AutoTesting

1/8

Automobi leEvaluat ion

Instruments

For the development and safety of the

next generat ion of cars

C10G-E044

For Automotive Industry


2/8

As a manufacturer of analytical and testing instruments, Shimadzu offers a range of instruments to

aid the development of fuel-cell vehicles (FCV), which are widely expected to become the next

generation of automobile.

Shimadzu provides overall assistance with the development of these vehicles, including the

development of solid polymer fuel cells, seen as the most promising candidate for vehicle

applications; development of reformers to minimize the infrastructure required; and the development

and evaluation of the new materials needed to create a practical FCV.

Evaluation, Inspection, and

Evaluation of engine and peripheral instruments

Evaluation of electronic and electrical components

Evaluation of fuel cells

Evaluation of suspension and

other power transmission systems

Evaluation of body and interior

Reformer Evaluation Instruments

The GC-14B gas chromatograph permits measurement into the ppm

range, a level of sensitivity not possible with a conventional TCD, by

using a pulsed discharge detector (PDD). Permits highly sensitive

measurement of CO in reformer emissions.

GC-14B (PDD)

High-sensitivity Inorganic Gas Analyzer

This portable infrared gas analyzer is able to continuously monitor

low concentrations of CO in reformer emissions. It also handles

continuous measurement of CO2 and CH4. Monitors up to two

components simultaneously.

CGT-7000

Portable Continuous Gas Analyzer

Testing Instruments for All Development Needs


3/8

Raw material Parts forming Body forming

Material Strength Evaluation Instruments

Electronic and Electrical Component Tester

Fatigue and Endurance Testing Machines

Conduct thermal fatigue testing on parts such as

mufflers, exhaust manifolds, and exhaust pipes.

Thermal Fatigue Testing System

This multi-function fatigue tester is suitable for

the fatigue testing of ball joints and other parts.

The upper-actuator design expands the test

space, permitting testing in controlled

atmospheres, such as a corrosive-gas chamber

or constant-temperature chamber.

EHF-U Series Servopulser

Used to conduct torsional fatigue endurance

testing of power-transmission components,

such as clutch and torque converters, and

steering system components. A high-

temperature chamber can be mounted to

evaluate dynamic characteristics.

Torsional Fatigue Tester

This simulator is used for the durability testing

of chassis, suspension, and other important

safety parts. Systems can be configured with

actuators for forces from 5 kN to 50 kN.

Force Simulator

Thermal Analysis Instruments

This instrument can be used for the characterization

of materials by measuring the melting temperature,

heat of fusion, and glass transition temperature for

rubbers, plastics, or paints. This is an extremelysensitive DSC with noise not

exceeding 1 W. Incorporates

a liquid nitrogen cooling

DSC-60

Differential Scanning Calorimeter Thermomechanical Analyzer Simultaneous DTA-TG

The TMA is applicable for the thermal

expansion measurement and mechanical

characteristic evaluation of various

materials. The unique high-precisiondisplacement sensor measures a wide

range of sample length changes at high

sensitivity The special accessories and

TMA-60/60H

This instrument is suitable for the measurement o

the heat resistance of engineering plastics and the

quantitation of carbon black in rubber.

Incorporates a highly sensitiveand accurate balance suitable

for themogravimetric analysis.

The unique top loading

DTG-60/60H

Controlled by air-actuated servos rather than oil,

these fatigue and durability testing machines are

ideal for evaluating a variety of electrical parts and

new materials, including printed circuit boards and

connectors. Available in 4 capacities: 1 kN, 2

kN, 5 kN, and 10 kN (for

dynamic testing).

ADT-A Air Servo Series

MMT Series (Dynamic testing machine)These magnetic micro testing systems apply

small test forces that cannot be generated using

hydraulic systems. Suitable for the evaluation of

new materials and

electronic parts such

as printed circuit

boards and connectors.

Available in threemodels: 10 N, 100 N,

and 250 N.


4/8

Painting

EV engineHybridFuel cell

Engine Electrical installation

Designed for reliability and ease-of-use, these precision universal testers

provide high control and measurement performance. For the three most

important functions of a testing machine - setting, measurement, and

inspection - enjoy the highest level of performance available. TRAPEZIUM X

PC software uses the state-of-the-art .NET technology that is newly designed

to ensure operation is easier than ever. Additionally, perform tests without a

computer via a color TFT touch panel, use the USB memory function to

directly set test parameters created previously on a PC, and then easily

transfer result data to a USB device. Choose from several floor-type and

tabletop models to fit your application needs.

AG-X Series www.ag-x.biz

Precision Universal Testers

Micro Hardness Tester

HMV-2AD

This is a computer-controlled, servo-hydraulic universal test ing machine. The

test rate can be set using the

easy-to-use automatic load controller.

This is the optimal testing machine

for the tensile, compression, and

bending testing of strong parts and

materials. Versions are available

from 500 kN to 2,000 kN.

UH-I Series

Universal Testing MachineElectronic and Electrical Parts Tester

Designed for evaluating soldered joints,

connectors, and other small parts, EZ Test

Series machines are ideal for users

concerned about the precision of manual

measurements made using push-pull gauges

or other tools. Available in 11 capacities,

from 5 kN to 1 N (for static testing).

EZ Test Series

High Speed Tensile Testing Machine

Growing demand for increased safety and

reliability means evaluating the dynamic strength

(impact resistance characteristics) of materials

and parts is more important than ever.

Using speeds of up to 72 km/h (20 m/s), this High-

Speed Tensile Testing Machine provides S-S

curves, maximum test force, energy level,

displacement and other tensile test data.

Hydroshot HITS-T10

This tester is widely used for the

hardness evaluation of quenched

parts and the hardness testing of

welded joints. It measures

hardness by automatically reading

the length of the indentation

diagonally at a high accuracy of

0.125 m resolution (using 40x

lens). Load: 98.07 mN to 19.61 N.


5/8

or installation Door/exterior part evaluation Testing and inspection

Materials Evaluation Instruments (Surface Observation, Composition, Structure, Film Thickness)

This new microscope offers simple, high-

magnification imaging of a samples surface in

atmospheric air and accurate sample height

measurements. Permits the observation of metals

and semiconductors as well as non-conductors

such as ceramics, organic matter, and polymers

without the need for coating or other pretreatment.

This microscope can also analyze the material

properties of the sample at the probe tip, and can

be upgraded for SPM observations in a controlled

atmosphere.

SPM-9600

Scanning Probe Microscope

Energy Dispersive X-ray Fluorescence Spectrometer

This SPM conducts imaging at several 10,000x magnification to observe

changes in the surface topography under controlled temperature and

humidity conditions.

WET-9600

The SSX-550 Analytical Scanning Electron

Microscope is the latest SEM-EDS

combined system, offering a comfortable

operation environment for micro-scale

observations of surface topography and

element analysis. The design emphasizes

low-acceleration-voltage imaging, which

allows easy observation of non-conducting

samples without pretreatment. The low

vacuum observation function permits non-

deposition EDS analysis.

SSX-550

Scanning Electron Microscope

With its ability to analyze 36 elements

simultaneously, this easy-to-operate

system achieves rapid, accurate, non-

destructive analyses for process

management, R&D, and system

automation.

This system can analyze elements in

diverse samples, from trace levels to high

concentrations, permitting analysis for

management and R&D of raw materials,

new materials, and components.

MXF-2400

The EDX systems offer one-touch, accurate, simultaneous analysis of light to

heavy elements using operations so simple that a novice can do it! The large

sample chamber opens and closes automatically and accommodates liquid,

powder, or solid samples up to 300 mm diameter.

Also provides imaging of the sample surface.

EDX-720

Energy Dispersive Micro X-ray Fluorescence Spectrometer

The MicroEDX series, which utilizes polycapillary X-ray lens, achieves high-

sensitivity and high-resolution analysis in a small point of 50 micro-meter

diameter. Pinpoint targeting is realized by a dual CCD camera system and a

precisely controlled motorized sample stage. A powerful

software suite includes Standardless FP quantitation and

Auto mapping embedded as standard features to

support diverse analysis.

Transmission X-ray images can

be observed with an

optional kit.

EDX Series

Environmentally - controlled SPM

Multi-Channel X-ray Fluorescence Spectrometer


6/8

te Inspection and maintenance Scrapping/recycling

Powder Evaluation Instruments

These instruments offer highly sensitive and accurate

component analysis of all materials used in automobile

parts. The comprehensive range extends from a tabletop

design with low running costs to a high-resolution, high-

speed system using twin monochromators.

ICPE-9000

Multitype ICP Emission Spectrometer

This X-ray diffractometer offers an extra-large horizontal

goniometer that accommodates large samples up to 350

mm diameter (model L). The extremely stable Windows

NT/2000 platform makes the instrument remarkably

easy to use.

Extensive options

(polycapillary, large

R- sample stage)

support manyapplications.

XRD-7000

This analyzer measures particle size distributions in powders and coatings,

such as hydrogen absorbing alloys, electrode materials, and ceramics.

This model offers rapid, high-sensitivity, and high-resolution measurements

across a range from 0.03 to 1000 m. Other models in the lineup include

the SALD-7001 for ultra-fine particles (0.015 to 500 m measuring range)

and the SALD-3101 for coarse and high-density particles (0.05 to 3000 m

measuring range).

SALD-2101

This is a quadrupole mass spectrometer using

an ICP ion source. It achieves multi-element

simultaneous analysis at ppt-level sensitivity.

The diagonal lens (patent pending) reduces

contamination.

ICPM-8500

X-ray Diffractometer

X-ray diffractometers are used in diverse fields to measure many

materials, including new materials, ceramics, metals,

semiconductors, and polymers. The XRD-6000 is a general-purpose

instrument using a vertical goniometer and data-processing software

for ease-of-use and

multifunctionality. Shimadzus

new X-ray optical system

ensures highly sensitive and

accurate X-ray diffraction

measurements of curved or

extremely irregular samples.

XRD-6000

This spectrometer is used for the quality control

of pig iron and cast-aluminum automobile parts.

It employs a unique horizontal lighting stand

and time-resolution PDA software to enhance

sensitivity in the trace region.

PDA-7000

Optical Emission Spectrometer Sequential X-ray Fluorescence Spectrometer

XRF-1800

X-ray Diffractometer Laser Diffraction Particle Size Analyzer

Inductively Coupled Plasma Mass Spectrometer

The new line of Shimadzu balances sets a higher standard

for attractive ergonomic design and operational efficiency.

An extensive product lineup and a host of accessories and

peripherals offer users the choice of the most suitable

balance to meet specific application requirements.

Shimadzus UniBloc technologyand over 80 years of experience

in precision weighing

instruments bring analytical

balances to a new level of

stability, reliability and response.

AUW-D models are the first five-

decimal balances with this technology.

The new line of Shimadzu top-loading balances are

engineered with the UniBloc mechanism, resulting in unrivaled

response, stability and durability. Powerful features support

ANALYTICAL BALANCES (AU series)

TOP-LOADING BALANCES (UW/UX)

Shimadzu Balances

The XRF-1800 can conduct qualitative analysis and

quantitative analysis on a wide range of samples,

including solids, powders, liquids, and thin films. It is

a state-of-the-art instrument employing the worlds

first 250 m mapping and higher-order X-rays for

more accurate

qualitative and

quantitative


7/8

Evaluation Instruments for Solid Polymer Fuel Cells

Thanks to increased sensitivity and ease of operation of microscope

systems, FTIR, which is widely used as a method of polymer

analysis, is becoming increasingly applied to polymer defect analysis.

IRPrestige-21 is a PC-controlled Fourier transform infrared

spectrophotometer operating with IRsolution software, which providesoutstanding ease of use and a high level of processing functions. The

IRPrestige-21 is a research-grade FTIR with an expandable measurement

range from Near IR to Far IR and 0.5cm-1 resolution.

With the AIM-8800R Automatic Infrared Microscope, samples as small as 10

m can be measured with high sensitivity.

IRPrestige-21/AIM-8800

Fourier Transform Infrared Spectrophotometer

The EPMA-1600/EPMA-1610 Electron Probe Microanalyzers are

leading-edge instruments that can be used for the development and

evaluation of many automotive materials, including fuel cells,

catalysts, and structural components. The EPMA-1610 Electron

Probe Microanalyzer incorporates a CeBix cathode that permitsgenuine sub-micron analysis, making the instrument perfect for the

development of new technologies.

EPMA-1600/EPMA-1610

Electron Probe Microanalyzer

Other Instruments for Fuel Cell Evaluation

Handles the evaluation of modified surface areas and film strength,

including measurement of the strength and Youngs modulus of

electrolyte films, film penetration strength testing before and after

film processing, and hardness testing of plating layers.

DUH-211

Dynamic Ultra Micro Hardness Tester

Used for evaluating the change in generation efficiency due to the

stack clamping force. Applicable for tensile, compressive, and

bending testing of small parts, such as electrolyte film, separators,

and MEA (film-electrode connection).

A temperature/humidity chamber can be attached to permit

measurements in a controlled atmosphere.

Autograph AG-X/AGS-J Series

Universal Testing Machine

Non-Destructive Testing Systems

CT scan positioning function using an exterior

camera and X-ray automatic configuration

provide easy-manipulation to acquire 3D-CT

images. Focal size 4 m and high tube voltage

225kV enables inspection of various

applications.

inspeXio SMX-225CT

Microfocus X-ray CT System

Fast-moving stage, positioning an inspection points on

exterior images and tracking function, configured by just a

simple mouse click, provide fast m ove to another inspecting

point and fast angle variation. The SMX-2000 also provides

high resolution images without distortion - free and halation,

most suitable for inspection of a PCB assembly.

SMX-2000

Microfocus X-ray Fluoroscopic Inspection System

Incorporates a microfocus X-ray tube that

permits the analysis and evaluation of bubbles

and hair cracks in aluminum die-castings. It is

also the optimal instrument to conduct micro

testing for the internal analysis and evaluation

of rubber, plastic, and ceramics, and ICs,

capacitors and other electronic devices.

SMX-3000 micro

Microfocus X-ray Fluoroscopic Inspection System

SeparatorElectrode with platinum catalyst

Electrolyte film


8/8

Others

The contents of this brochure are subject to change without notice.

JQA-0376

SHIMADZU CORPORATION. International Marketing Division

3. Kanda-Nishikicho 1-chome, Chiyoda-ku, Tokyo 101-8448, Japan

Phone: 81(3)3219-5641 Fax. 81(3)3219-5710URL http://www.shimadzu.com

Founded in 1875, Shimadzu Corporation, a leader in the

development of advanced technologies, has a distinguishedhistory of innovation built on the foundation of contributing to

society through science and technology. We maintain a global

network of sales, service, technical support and applications

centers on six continents, and have established long-term

relationships with a host of highly trained distributors located

in over 100 countries. For information about Shimadzu, and

to contact your local office, please visit our Web site at

www.shimadzu.com

Shimadzu Overseas Customer Support

To support customers engaged in research and quality assurance, Shimadzu has established a global service network

incorporating customer support, training and service centers in the USA, Germany, Turkey, Brazil, India, China and

Singapore, as well as in Japan. Shimadzu provides comprehensive support services including instrument maintenance,training workshops and the provision of relevant information to meet customer needs regarding both software and hardware.

OVERSEAS SUBSIDIARIES

OVERSEAS OFFICES

JOINT VENTURES

CUSTOMER SUPPORT CENTERS

This tester conducts compression testing on the foam rubber used in

car seats according to JIS standards. It is a special attachment for

the Universal Testing Machine.

Foam Rubber Compression Tester

This leak detector uses helium

that easily passes throughpinholes to detect leaks from

fuel cells or evaluate the

performance of polymer films.

It is resistant to background

effects.

MSE Series

Helium Leak Detector

Documents

Shimadzu_AutoTesting