Upload
dodiep
View
215
Download
0
Embed Size (px)
Citation preview
Presentation Prepared by:
Service Sales & Operation
Team #1
Hyung-ki Song
010-3617-4823
Smart-UPS New Product SMT
Contents
• Product Information
• UPS Operation
• Troubleshooting
• Battery Replacement
• IP Setting
• Log Download
Product Information
Models
SMT750RMI2U
SMT1000RMI2U
SMT1500RMI2U
SMT2200RMI2U
SMT3000RMI2U
SMT750I
SMT1000I
SMT1500I
SMT2200I
SMT3000I
SMT
Product Information
Product Information
Product Information
Product Information
SMT UPS 전면 디스플레이
Product Information
SMT UPS 특징 및 장점
Product Information
SMT UPS 특징 및 장점
Contents
• Product Information
• UPS Operation
• Troubleshooting
• Battery Replacement
• IP Setting
• Log Download
Operation – Start up
On/Off 버튼 누름MT Self Test 진행 New Battery 설치 확인
New Battery 를 설치한
경우 “Yes”로 변경
정상동작 상태 확인 전원 상태 확인
Operation – Turn off
On/Off 버튼 누름MT Delay Time 없이 Off
Delay Time 후 Off Delay Time 없이 Reboot No Action
Turn UPS Off: Yes 로 선택MT
Operation – Standard Menus
Operation – Advanced Menus
Operation – Advanced Menus
Operation – Setting
Operation – Setting
Operation – Setting
Contents
• Product Information
• UPS Operation
• Troubleshooting
• Battery Replacement
• IP Setting
• Log Download
Troubleshooting
Troubleshooting
Contents
• Product Information
• UPS Operation
• Troubleshooting
• Battery Replacement
• IP Setting
• Log Download
Battery Replacement
Battery Connector 분리MT Bezel 분리MT 내부 판넬 분리MT
Battery를 앞으로 당김MT Internal Battery Connector
분리 후 Battery 교체 MT New Battery 설치 날짜 설정
Contents
• Product Information
• UPS Operation
• Troubleshooting
• Battery Replacement
• IP Setting
• Log Download
IP Setting
Config NMC (NMC 카드 장착시) Manual Mode로 설정 IP 설정
Subnet Mask 설정 Gateway 설정 설정완료시 NMC Rebooting 됨
IP Setting
• 설정된 IP로 접속
• 로그인 ID : apc
• 패스워드 : apc
• 로그인을 하면 Home, Status, Control, Configuration, Tests, Logs, About 등의 항목
을 확인할 수 있음
Contents
• Product Information
• UPS Operation
• Troubleshooting
• Battery Replacement
• IP Setting
• Log Download
Log Download • Window 시작 매뉴에서 cmd 실행
• ftp_IP Address 누르고 Enter
• apc 누르고 Enter
• apc 누르고 Enter
• bin 누르고 Enter
• hash 누르고 Enter
• get_config.ini 누르고 Enter
• get_event.txt 누르고 Enter
• get_data.txt 누르고 Enter
• quit 누르고 Enter
• exit 누르고 Enter
• 해당 폴더에 config, event, data 파일이
저장됨
Thank you for your attention