Sunnyvale, CA 94089-2209, USA MicroSmart · Sunnyvale, CA 94089-2209, USA Tel (408) 747-0550 Toll Free (800) 262-IDEC Fax (408) 744-9055 Fax (800) 635-6246 E-mail: [email protected]

IDEC CORPORATION1175 Elko Drive

Sunnyvale, CA 94089-2209, USA

Tel (408) 747-0550

Toll Free (800) 262-IDEC

Fax (408) 744-9055

Fax (800) 635-6246

E-mail: [email protected]

www.idec.com

IDEC CANADA LIMITEDUnit 22-151 Brunel Road

Mississauga, Ontario, L4Z 1X3, Canada

Tel (905) 890-8561

Toll Free (888) 317-4332

Fax (905) 890-8562

IDEC AUSTRALIA PTY. LTD.2/3 Macro Court

Rowville, Victoria 3178, Australia

Toll Free 1-800-68-4332

Fax +61-3-9763-3255


IDEC IZUMI CORPORATION7-31, Nishi-Miyahara

1-Chome, Yodogawa-ku

Osaka 532-8550, Japan

Tel +81-6-6398-2571

Fax +81-6-6392-9731

www.izumi.com

IDEC EUROPEAN HEADQUARTERSUnit 2 Beechwood

Chineham Business Park

Basingstoke

Hampshire RG24 8WA, United Kingdom

Tel +44-1256-321000

Fax +44-1256-327755


IDEC ELEKTROTECHNIK GmbHWendenstraße 331

D-20537 Hamburg, Germany

Tel +49-40-2530540

Fax +49-40-25305424


IDEC IZUMI (H.K.) CO., LTD.Room No.1409, Tower 1 Silvercord

30 Canton Road, Tsimshatsui

Kowloon, Hong Kong

Tel +852-2-376-2823

Fax +852-2-376-0790

IDEC IZUMI ASIA PTE. LTD.No. 31, Tannery Lane #05-01

Dragon Land Building,

Singapore 347788

Tel +65-6746-1155

Fax +65-6844-5995

IDEC TAIWAN CORPORATION8F-1, No.79, Hsin Tai Wu Road, Sec. 1

Hsi-Chih, Taipei County, Taiwan, (ROC)

Tel +886-2-2698-3929

Fax +886-2-2698-3931


IDEC IZUMI (SHANGHAI) Co., LTD.Room E, 15F, Majesty Building

No. 138 Pudong Avenue

Shanghai 200120, P.R.C.

Tel +86-21-5887-9181

Fax +86-21-5887-8930

www.idec.com/usa©2003 IDEC Corporation. All Rights Reserved.

Catalog No. EP991-1 04/03 10K

Programmable Logic Controller

Conforming to world-wide standards

PRODUCT SERVICE

MicroSmartE X P A N D I N G Y O U R C O N T R O L

• Two types of CPU modules: All-in-one and slim types.

• Expansion of I/O terminals is possible (All-in-one type: up to 88 I/O,

Slim type: up to 264 I/O)

• In addition to the RS232C port built into the CPU module, another communication port can be added using a communication adapter or communication module (RS232C or RS485).

• The analog voltage input function on the slim type CPU module and analog I/O module enhances the processing capacity of analog signals.

For information, please refer to the MicroSmart catalog.

Universal AC input voltage function (100-240V AC)DIN rail mount type power supplies, available in:

7.5W, 15W, 30W, 50W, 75W, 100W, 120W, and 240W

For information, please refer to the new PS5R catalog.

PS5RSwitching Power Supplies

S e r i e s

Simple TextMessaging Displays

Pages 12 to 17

Compact MonochromeTouchscreen

Pages 10 to 11

ColorTouchscreens

Pages 4 to 9

IDEC brings that control to your fingertips with the HG Family of operatorinterfaces. You know your needs better than anyone, so we give you the optionto choose the O/I that works for you. Full color or monochrome, text displayor touchscreen — whatever you're looking for, you'll find it in the HG Series.

IDEC is a leader in human-machine interface (HMI) technology, and touchscreens play a big part in creatingthe most efficient, convenient interaction between you andyour equipment. We developed our first touchscreens in1996 and have continued to increase and improve on thefamily ever since, adding more colors, touch regions, andbuilt-in features.

Each interface addresses a different need for today's applications. Choose from any of our sleek, compact models: the HG1X for elementary operations, the HG1Bfor more control over larger jobs, the HG2F for managingeven the most complicated tasks, and the HG3F andHG4F for high-profile applications that need the largest,clearest screen possible. The standard features are tailoredto the level of control, and include internal alarms, serialports and bright LCD screens. Many of the HG productsare also UL1604 listed, approved for use in hazardouslocations.

HG touchscreens work with all of IDEC's programmablelogic controllers, and have drivers available to make themcompatible with PLCs from other manufacturers. Eachseries also has a dedicated programming software packageto suit the particular features of that interface.

The choice is yours. For more information about the HGFamily of operator interfaces, visit us on the web atwww.idec.com

2 3

One Family, Seven Models. . .So Many Levels of Control!

Simple TextMessaging Displays

Pages 12 to 17

Compact MonochromeTouchscreen

Pages 10 to 11

ColorTouchscreens

Pages 4 to 9

IDEC brings that control to your fingertips with the HG Family of operatorinterfaces. You know your needs better than anyone, so we give you the optionto choose the O/I that works for you. Full color or monochrome, text displayor touchscreen — whatever you're looking for, you'll find it in the HG Series.

IDEC is a leader in human-machine interface (HMI) technology, and touchscreens play a big part in creatingthe most efficient, convenient interaction between you andyour equipment. We developed our first touchscreens in1996 and have continued to increase and improve on thefamily ever since, adding more colors, touch regions, andbuilt-in features.

Each interface addresses a different need for today's applications. Choose from any of our sleek, compact models: the HG1X for elementary operations, the HG1Bfor more control over larger jobs, the HG2F for managingeven the most complicated tasks, and the HG3F andHG4F for high-profile applications that need the largest,clearest screen possible. The standard features are tailoredto the level of control, and include internal alarms, serialports and bright LCD screens. Many of the HG productsare also UL1604 listed, approved for use in hazardouslocations.

HG touchscreens work with all of IDEC's programmablelogic controllers, and have drivers available to make themcompatible with PLCs from other manufacturers. Eachseries also has a dedicated programming software packageto suit the particular features of that interface.

The choice is yours. For more information about the HGFamily of operator interfaces, visit us on the web atwww.idec.com

2 3

One Family, Seven Models. . .So Many Levels of Control!

HG4F Specifications

The Best Foot ForwardImagine a 256 color touchscreen with a 12.1-inch

TFT LCD screen and 8 megabytes of memory.

Then take a look at the HG4F and see if IDEC

hasn't developed exactly what you had in mind.

This interface is ideal for any situation that requires

a clear screen visible from any distance, or applica-

tions that demand the most out of a display. The

HG4F is RS-232, RS-485 and RS-422 compatible,

plus it has a built-in 10BaseT Ethernet connection

and supports Compact Flash memory. Use the

updated WindO/I-NV2 software to program any of

the 1200 touch regions to suit your applications.

• 12.1" TFT LCD touch screen with 1200 touch regions

• 256 colors with 800x600 pixel resolution

• 8 MB of memory, Compact Flash support

• RS-232, RS-485 and RS-422 compatibility

• Built-in 10BaseT Ethernet port and a parallel port

• UL1604 for hazardous locations; NEMA 4, 4X, 13 and IP66 protection

• UL/c-UL Listed, CE marked

• Alarm, Trend and Recipe support

• Pass through communications

• Built-in real time clock, replaceable back light

General Specifications

Type Item DescriptionStandards Safety standards UL508, UL1604, CSA C22.2, No.213, CE

EMC standards IEC/EN61131-2, IEC/EN61000-6-4, IEC/EN61000-6-2, CEElectrical Rated voltage 24V DC (Suggested power supply - IDEC PS5R Series)

Voltage variation range 80 to 120% of rated voltage (including ripple)Power consumption 25W maximum (at the rated voltage)Momentary power interruption 10 msec maximum, level: PS-2Inrush current 15A maximum (cold start)Dielectric strength 1,500V AC, 10mA for 1 minute (between power terminals and FG)Insulation resistance 10MΩ min. (500VDC megger) (between power terminals and FG)

Environmental Operating temperature range 0-45°C (no freezing)Operating humidity range 20-85% RH (no condensation)Storage temperature –20 to 60°C (no freezing)Storage humidity 20-85% RH (no condensation)Degree of protection IP66, NEMA 4, 4X, and 13 (front panel)Altitude 0-2000m (operation), 0-3000m (transport) - (IEC61131-2)Vibration resistance 10 to 55Hz, 9.8 m/s2 (2 hrs. each in X, Y, & Z axes)Shock resistance 147 m/s2 (5 times in the X, Y, & Z axes)Pollution degree Pollution degree 2 (IEC60664-1)Terminal Power supply terminal: M4 screw. Tightening Torque 1.0 to 1.3 N·m

Structural Panel cutout dimensions (WxH) (332mm ±1) x (258mm ± 1)Exterior dimensions (WxHxD) 348mm x 270mm x 58mmWeight Approx. 3.4kg

Part Numbers For HG4F

Part Number DescriptionHG4F-JT22TFW HG4F Color 12.1” operator interfaceHG4F-JT22TFW-DH485-500 HG4F 12.1" Color TFT OI with Allen Bradley DH-485 for SLC500 PLCsHG9Y-ZSS2W WindOI-NV2 Software

HG4F Cables

Part Number DescriptionHG9Z-XCM1A Programming Cable for HG2F/3F/4F series (from PC to HG4F)HG9Z-3C115A Cable between IDEC Micro3/MicroSmart (FC4A-PC2) PLCs and HG2F/3F/4F, 5 ft.HG9Z-3C125A Cable between IDEC Micro3C/ONC/MicroSmart (port 2) PLCs and HG2F/3F/4F, 5 ft.FC4A-KC2CA Cable between IDEC MicroSmart (port 1 or 2) and HG2F/3F/4F, 5 ft. HG9Z-2C145A Cable between IDEC Micro3C/ONC/MicroSmart (RS485) PLCs and HG2F/3F/4F, 5 ft.HG9Z-3C135A Cable between Mitsubishi A Series or Omron (link) and HG2F/3F/4F, 5 ft.HG9Z-3C145A Cable between Mitsubishi A Series (direct or link) and HG2F/3F/4F, 5 ft.HG9Z-3C155A Cable between Omron C Series and HG2F/3F/4F, 5 ft.HG9Z-2C125A Cable between AB-SLC 503/504 Series and HG2F/3F/4F, 5 ft.HG9Z-2C135A Cable between AB-Micrologix Series and HG2F/3F/4F, 5 ft.HG9Z-2C155A Cable between Siemens S7-200 Series and HG2F/3F/4F, 5 ft.

HG4F Accessories

Part Number DescriptionHG9Z-4DAPN02 Protective Sheet for HG4F (2 pack)HG9Z-4K1PN10 Mounting Clip for HG4F (10 pack)HG9Z-4FB Replacement Backlight for HG4F HG9Z-2G1 O/I Communication Link Unit for HG4FHG9Z-3P102 Digital I/O Expansion Unit for HG4FHG9Z-MF32 HG3F/HG4F Compact Flash Card (32MB)

HG4F Drivers (included with software)

IDEC • Allen Bradley - DF1, and DH485 • Omron • Mitsubishi • Siemens • Modbus-RTU • Keyence • GE-Fanuc (SNPX)More drivers available at www.idec.com/usa

4 5

348mm

331mm

270m

m

257m

m

58m

m

6mm

A

B

Mounting Clip

Mounting Clip

HG4F

Panel

A: 258mm + 1mmB: 332mm + 1mmPanel thickness: 2 to 5mm

HG4F Specifications

The Best Foot ForwardImagine a 256 color touchscreen with a 12.1-inch

TFT LCD screen and 8 megabytes of memory.

Then take a look at the HG4F and see if IDEC

hasn't developed exactly what you had in mind.

This interface is ideal for any situation that requires

a clear screen visible from any distance, or applica-

tions that demand the most out of a display. The

HG4F is RS-232, RS-485 and RS-422 compatible,

plus it has a built-in 10BaseT Ethernet connection

and supports Compact Flash memory. Use the

updated WindO/I-NV2 software to program any of

the 1200 touch regions to suit your applications.














Voltage variation range 80 to 120% of rated voltage (including ripple)Power consumption 25W maximum (at the rated voltage)Momentary power interruption 10 msec maximum, level: PS-2Inrush current 15A maximum (cold start)Dielectric strength 1,500V AC, 10mA for 1 minute (between power terminals and FG)Insulation resistance 10MΩ min. (500VDC megger) (between power terminals and FG)

Environmental Operating temperature range 0-45°C (no freezing)Operating humidity range 20-85% RH (no condensation)Storage temperature –20 to 60°C (no freezing)Storage humidity 20-85% RH (no condensation)Degree of protection IP66, NEMA 4, 4X, and 13 (front panel)Altitude 0-2000m (operation), 0-3000m (transport) - (IEC61131-2)Vibration resistance 10 to 55Hz, 9.8 m/s2 (2 hrs. each in X, Y, & Z axes)Shock resistance 147 m/s2 (5 times in the X, Y, & Z axes)Pollution degree Pollution degree 2 (IEC60664-1)Terminal Power supply terminal: M4 screw. Tightening Torque 1.0 to 1.3 N·m

Structural Panel cutout dimensions (WxH) (332mm ±1) x (258mm ± 1)Exterior dimensions (WxHxD) 348mm x 270mm x 58mmWeight Approx. 3.4kg


Part Number DescriptionHG4F-JT22TFW HG4F Color 12.1” operator interfaceHG4F-JT22TFW-DH485-500 HG4F 12.1" Color TFT OI with Allen Bradley DH-485 for SLC500 PLCsHG9Y-ZSS2W WindOI-NV2 Software

HG4F Cables


HG4F Accessories




4 5

348mm

331mm

270m

m

257m

m

58m

m

6mm

A

B

Mounting Clip

Mounting Clip

HG4F

Panel

A: 258mm + 1mmB: 332mm + 1mmPanel thickness: 2 to 5mm

HG3F Specifications

A Perfect Ten. The HG3F model has

every feature of the HG4F, from Ethernet to

Compact Flash to the 256 bright backlit color

screen, in a slightly smaller package. With a 10.4-

inch viewable LCD screen and 768 touch regions,

the HG3F is an excellent tool for any application,

especially for smaller space requirements that still

need a high-profile display. The built-in library of

graphics can integrate with any screen or message,

making the visuals stand out even more against the

bright screen. Like the HG4F, the HG3F has a

field-replaceable backlight and a UL1604 rating for

hazardous locations.














Voltage variation range 80 to 120% of rated voltage (including ripple)Power consumption 25W maximumMomentary power interruption 10 msec maximum, Level: PS-2Inrush current 15A maximum (cold start)Dielectric strength 1,500V AC, 10mA for 1 minute (between power terminals and FG)Insulation resistance 10MΩ min. (500VDC megger) (between power terminals and FG)

Environmental Operating temperature range 0-50°C (no freezing)Operating humidity range 20-85% RH (no condensation)Storage temperature –20 to 60°C (no freezing)Storage humidity 20-85% RH (no condensation)Degree of protection IP66, NEMA 4, 4X, and 13 (front panel)Altitude 0-2000m (operation), 0-3000m (transport) - (IEC61131-2)Vibration resistance 10 to 55Hz, 9.8 m/s2 (2 hrs. each in X, Y, & Z axes) (IEC60068-2-6)Shock resistance 147 m/s2 (5 times in the X, Y, & Z axes) (IEC60068-2-27)Pollution degree Pollution degree 2 (IEC60664-1)Terminal Power supply terminal: M4 screw. Tightening Torque 1 to 1.3 N·m

Structural Panel cutout dimensions (WxH) (302mm + 0.5) x (228mm + 0.5)Exterior dimensions (WxHxD) 324mm x 240mm x 55.8mmWeight Approx. 2.8kg


Part Number DescriptionHG3F-FT22TFW HG3F Color 10.4” operator interfaceHG3F-FT22TFW-DH485-500 HG3F 10.4" Color TFT OI with Allen Bradley DH-485 for SLC500 PLCsHG9Y-ZSS2W WindO/I-NV2 Software

HG3F Cables


HG3F Accessories




6 7

324mm

301mm

240m

m

227m

m

55.8

mm

6mm

A

B

Mounting Clip

Mounting Clip

HG3F

Panel

A: 228mm + 0.5mmB: 302mm + 0.5mmPanel thickness: 2 to 5mm

HG3F Specifications

A Perfect Ten. The HG3F model has

every feature of the HG4F, from Ethernet to

Compact Flash to the 256 bright backlit color

screen, in a slightly smaller package. With a 10.4-

inch viewable LCD screen and 768 touch regions,

the HG3F is an excellent tool for any application,

especially for smaller space requirements that still

need a high-profile display. The built-in library of

graphics can integrate with any screen or message,

making the visuals stand out even more against the

bright screen. Like the HG4F, the HG3F has a

field-replaceable backlight and a UL1604 rating for

hazardous locations.














Voltage variation range 80 to 120% of rated voltage (including ripple)Power consumption 25W maximumMomentary power interruption 10 msec maximum, Level: PS-2Inrush current 15A maximum (cold start)Dielectric strength 1,500V AC, 10mA for 1 minute (between power terminals and FG)Insulation resistance 10MΩ min. (500VDC megger) (between power terminals and FG)

Environmental Operating temperature range 0-50°C (no freezing)Operating humidity range 20-85% RH (no condensation)Storage temperature –20 to 60°C (no freezing)Storage humidity 20-85% RH (no condensation)Degree of protection IP66, NEMA 4, 4X, and 13 (front panel)Altitude 0-2000m (operation), 0-3000m (transport) - (IEC61131-2)Vibration resistance 10 to 55Hz, 9.8 m/s2 (2 hrs. each in X, Y, & Z axes) (IEC60068-2-6)Shock resistance 147 m/s2 (5 times in the X, Y, & Z axes) (IEC60068-2-27)Pollution degree Pollution degree 2 (IEC60664-1)Terminal Power supply terminal: M4 screw. Tightening Torque 1 to 1.3 N·m

Structural Panel cutout dimensions (WxH) (302mm + 0.5) x (228mm + 0.5)Exterior dimensions (WxHxD) 324mm x 240mm x 55.8mmWeight Approx. 2.8kg


Part Number DescriptionHG3F-FT22TFW HG3F Color 10.4” operator interfaceHG3F-FT22TFW-DH485-500 HG3F 10.4" Color TFT OI with Allen Bradley DH-485 for SLC500 PLCsHG9Y-ZSS2W WindO/I-NV2 Software

HG3F Cables


HG3F Accessories




6 7

324mm

301mm

240m

m

227m

m

55.8

mm

6mm

A

B

Mounting Clip

Mounting Clip

HG3F

Panel

A: 228mm + 0.5mmB: 302mm + 0.5mmPanel thickness: 2 to 5mm

HG2F Specifications

Faster. Brighter. Slimmer.The HG2F is a 256-color, full-function touch-

screen with an amazing 192 touch regions and a

replaceable backlight, all put together in a slim and

sleek housing. Complete user configuration is easy

using our Wind-OI/NV 2 software and the internal

library of bitmap images. There are four available

models, with a monochrome or 256-color screen,

each compact and lightweight with the same great

features. The HG2F-C models also come with

IDEC's patented CC CLICK™ technology,

providing unique tactile feedback (for more about

CC CLICK™, see page 19).

• 5.7" STN LCD touch screen with 192 touch regions

• Available in 256 color or monochrome; 320x240 pixel resolution

• RS-232, RS-485 and RS-422 compatibility, pass through communications

• UL1604 for hazardous locations; IP65 protection




A

B

Mounting Clip

Mounting Clip

HG2F

Panel

A: 126.5mm + 0.5mmB: 162.5mm + 0.5mmPanel thickness: 1.6 to 5mm


Type Item DescriptionStandards Safety standards UL508, UL1604, CSA C22.2 No. 1010.1, No.213, IEC/EN61131, CE

EMC standards EN50081-2, IEC/EN61131-2, IEC/EN61000-6-2, CEElectrical Rated voltage 24V DC (Suggested power supply - IDEC PS5R Series)

Voltage variation range 85 to 120% of rated voltage (including ripple)Power consumption 10W maximum (at the rated voltage)Momentary power interruption 10 msec maximum, Level: PS-2Inrush current 20A maximumDielectric strength 1,000V AC, 10mA for 1 minute (between power terminals and FG)Insulation resistance 50MΩ min. (500VDC megger) (between power terminals and FG)

Environmental Operating temperature range 0-50°C (no freezing)Operating humidity range 30-85% RH (no condensation)Storage temperature –20 to 60°C (no freezing)Storage humidity 30-85% RH (no condensation)Degree of protection IP65Altitude 0-2000m (operation), 0-3000m (transport) (IEC61131-2)Vibration resistance 10 to 55Hz, 9.8 m/s2 (2 hrs. each in X, Y, & Z axes: IEC60068-2-6)Shock resistance 147 m/s2 (5 times in the X, Y, & Z axes: IEC60062-2-27)Pollution degree Pollution degree 2 (IEC60664-1)Terminal Power supply terminal: M3 screw. Tightening Torque 0.5 to 0.6 N·m

Structural Panel cutout dimensions (WxH) (162.5mm + 0.5) x (126.5mm + 0.5)Exterior dimensions (WxHxD) 6.77” (172mm) x 5.35” (136mm) x 2.2” (56mm)Weight Approx. 800g


Part Number DescriptionHG2F-SS22VF HG2F 5.7” Color OIHG2F-SB22VF HG2F 5.7” Monochrome OIHG2F-SS52VF HG2F Color OI with CC-SwitchHG2F-SB52VF HG2F Monochrome OI with CC-SwitchHG2F-SS22VF-DH485-500 HG2F 5.7" Color OI with Allen Bradley DH-485 for SLC500 PLCsHG2F-SB22VF-DH485-500 HG4F 5.7" MONOCHROME OI with Allen Bradley DH-485 for SLC500 PLCsHG9Y-ZSS2W WindO/I-NV2 Software

HG2F Cables


HG2F Accessories

Part Number DescriptionHG9Z-2D2 Protective Sheet for HG2F (5 pack)HG9Z-2K1 Mounting Clip for HG2F (1 per pack)HG9Z-2B1 Replacement Backlight for HG2F HG9Z-2G1 O/I Communication Link Unit for HG2FHG9Z-2P101 Digital I/O Expansion Unit for HG2F



172mm

162mm

136m

m

126m

m

56m

m

6mm

8 9

HG2F Specifications

Faster. Brighter. Slimmer.The HG2F is a 256-color, full-function touch-

screen with an amazing 192 touch regions and a

replaceable backlight, all put together in a slim and

sleek housing. Complete user configuration is easy

using our Wind-OI/NV 2 software and the internal

library of bitmap images. There are four available

models, with a monochrome or 256-color screen,

each compact and lightweight with the same great

features. The HG2F-C models also come with

IDEC's patented CC CLICK™ technology,

providing unique tactile feedback (for more about

CC CLICK™, see page 19).

• 5.7" STN LCD touch screen with 192 touch regions

• Available in 256 color or monochrome; 320x240 pixel resolution

• RS-232, RS-485 and RS-422 compatibility, pass through communications

• UL1604 for hazardous locations; IP65 protection




A

B

Mounting Clip

Mounting Clip

HG2F

Panel

A: 126.5mm + 0.5mmB: 162.5mm + 0.5mmPanel thickness: 1.6 to 5mm


Type Item DescriptionStandards Safety standards UL508, UL1604, CSA C22.2 No. 1010.1, No.213, IEC/EN61131, CE

EMC standards EN50081-2, IEC/EN61131-2, IEC/EN61000-6-2, CEElectrical Rated voltage 24V DC (Suggested power supply - IDEC PS5R Series)

Voltage variation range 85 to 120% of rated voltage (including ripple)Power consumption 10W maximum (at the rated voltage)Momentary power interruption 10 msec maximum, Level: PS-2Inrush current 20A maximumDielectric strength 1,000V AC, 10mA for 1 minute (between power terminals and FG)Insulation resistance 50MΩ min. (500VDC megger) (between power terminals and FG)

Environmental Operating temperature range 0-50°C (no freezing)Operating humidity range 30-85% RH (no condensation)Storage temperature –20 to 60°C (no freezing)Storage humidity 30-85% RH (no condensation)Degree of protection IP65Altitude 0-2000m (operation), 0-3000m (transport) (IEC61131-2)Vibration resistance 10 to 55Hz, 9.8 m/s2 (2 hrs. each in X, Y, & Z axes: IEC60068-2-6)Shock resistance 147 m/s2 (5 times in the X, Y, & Z axes: IEC60062-2-27)Pollution degree Pollution degree 2 (IEC60664-1)Terminal Power supply terminal: M3 screw. Tightening Torque 0.5 to 0.6 N·m

Structural Panel cutout dimensions (WxH) (162.5mm + 0.5) x (126.5mm + 0.5)Exterior dimensions (WxHxD) 6.77” (172mm) x 5.35” (136mm) x 2.2” (56mm)Weight Approx. 800g


Part Number DescriptionHG2F-SS22VF HG2F 5.7” Color OIHG2F-SB22VF HG2F 5.7” Monochrome OIHG2F-SS52VF HG2F Color OI with CC-SwitchHG2F-SB52VF HG2F Monochrome OI with CC-SwitchHG2F-SS22VF-DH485-500 HG2F 5.7" Color OI with Allen Bradley DH-485 for SLC500 PLCsHG2F-SB22VF-DH485-500 HG4F 5.7" MONOCHROME OI with Allen Bradley DH-485 for SLC500 PLCsHG9Y-ZSS2W WindO/I-NV2 Software

HG2F Cables


HG2F Accessories

Part Number DescriptionHG9Z-2D2 Protective Sheet for HG2F (5 pack)HG9Z-2K1 Mounting Clip for HG2F (1 per pack)HG9Z-2B1 Replacement Backlight for HG2F HG9Z-2G1 O/I Communication Link Unit for HG2FHG9Z-2P101 Digital I/O Expansion Unit for HG2F



172mm

162mm

136m

m

126m

m

56m

m

6mm

8 9

HG1B Specifications


Type Item DescriptionStandards Safety standards UL508, CSA C22.2 No.142, IEC/EN61131, CE

EMC standards EN50081-2, IEC/EN61131-2Electrical Rated voltage 24V DC ripple factor: 10% maximum (Suggested power supply - IDEC PS5R Series)

Voltage variation range 85 to 120% of rated voltage Power consumption 10W maximumMomentary power interruption 10 ms maximumInrush current 10A maximumDielectric strength 1500V AC, 10ms,1 hour (between power or I/O terminal and ground)Insulation resistance 50MΩ min. (500V DC megger) between power or I/O terminal and ground

Environmental Operating temperature range 0-55°C (operation)0-50°C (display contrast)

Operating humidity range 10-90% relative humidity (avoid condensation)Degree of protection IP65Storage temperature –20 to 70°CStorage humidity 5-90% relative humidity (avoid condensation)Vibration resistance 10 to 55Hz, 10 m/s2 (2 hrs. each in X, Y, & Z axes)Noise resistance IEC1000-4-4 compliant

Between power terminal and ground: 1k V p-p, 1µs, 1ns (with noise simulator)Static electricity resistance IEC 61000-4-2 compliant, 6kV (using a static electricity simulator)Operating atmosphere No corrosive gasses

Structural Installation Panel mountPanel cutout dimensions (WxH) 138mm x 68mmExterior dimensions (WxHxD) 146mm x 75mm x 70mmWeight Approx. 450g

Part Numbers For HG1B

Part Number DescriptionHG1B-SB22WF RS-232C Host/RS-485 HostHG1B-SB22JF RS422 HostHG9Y-ZSS2W WindOI-NV2 Software

HG1B Cables

Part Number DescriptionHG9Z-XCM1A or FC2A-KC4C Programming cable for HG1B series (PC to operator interface)HG9Z-XC12A Cable between HG1B series (RS232) and FA series IDEC PLC HG9Z-XC19A Cable between HG1B series (RS485) and IDEC Micro3 PLCHG9Z-XC11A or HG9Z-XC14A Cable between HG1B series (RS232) and IDEC Micro3 PLC (FC2A-KC2 cable is required)HG9Z-XC183 Cable between HG1B series (RS232) and IDEC Micro3C/ONC/MicroSmart (port2) PLCsHG9Z-XC100 Cable between HG1B series (RS232) and AB-SLC 503/504 PLCFC4A-KC1CA Cable between HG1B series (RS232) and IDEC MicroSmart (port1 and port2)HG9Z-XC300 Cable between HG1B series (RS232) and Aromat FPO PLCHG9Z-XC400 Cable between HG1B series (RS232) and Koyo DL240 PLCHG9Z-XC500 Cable between HG1B series (RS232) and AB-Micrologix PLCsHG9Z-XC305 Cable between HG1B series (RS232) and Mitsubishi FX2N

HG1B Divers (included with software)

IDEC • Allen Bradley - DF1 • Omron • Mitsubishi • Modicon • Aromat • Siemens • PLC Direct • KeyenceMore drivers available at www.idec.com/usa

Just Right. Good things come in small

packages, like the HG1B operator interface. The

full-touch monochrome LCD screen has 48 distinct

touch regions with a response time of 300 msec.

Not only does it have bitmap and graphic display

capabilities or bar graph indicators, you can choose

from a library of images and graphics to create the

perfect screens. To help you communicate with

operators, the HG1B has an internal buzzer and the

screen can be configured to flash at different rates

depending on the severity of the alarm. The HG1B

can link to PLCs or other machines through RS232

or RS485 ports, both built-in, and drivers are also

available for non-IDEC PLCs.

• Compact housing — 5.7" x 3" x 2.8"

• 127KB memory, configure up to 100 pages

• Internal buzzer capable of up to 32 alarms

• Built-in communication ports (RS232, RS485 and RS422)

• Bar graph indicators

• Programmable with Wind-OI/NV2 (see page 18)

Installation Panel Thickness 1.6~5mm

64mm5mm

75mm

146mm

138mm

66mm

10 11

HG1B Specifications


Type Item DescriptionStandards Safety standards UL508, CSA C22.2 No.142, IEC/EN61131, CE

EMC standards EN50081-2, IEC/EN61131-2Electrical Rated voltage 24V DC ripple factor: 10% maximum (Suggested power supply - IDEC PS5R Series)

Voltage variation range 85 to 120% of rated voltage Power consumption 10W maximumMomentary power interruption 10 ms maximumInrush current 10A maximumDielectric strength 1500V AC, 10ms,1 hour (between power or I/O terminal and ground)Insulation resistance 50MΩ min. (500V DC megger) between power or I/O terminal and ground

Environmental Operating temperature range 0-55°C (operation)0-50°C (display contrast)

Operating humidity range 10-90% relative humidity (avoid condensation)Degree of protection IP65Storage temperature –20 to 70°CStorage humidity 5-90% relative humidity (avoid condensation)Vibration resistance 10 to 55Hz, 10 m/s2 (2 hrs. each in X, Y, & Z axes)Noise resistance IEC1000-4-4 compliant

Between power terminal and ground: 1k V p-p, 1µs, 1ns (with noise simulator)Static electricity resistance IEC 61000-4-2 compliant, 6kV (using a static electricity simulator)Operating atmosphere No corrosive gasses

Structural Installation Panel mountPanel cutout dimensions (WxH) 138mm x 68mmExterior dimensions (WxHxD) 146mm x 75mm x 70mmWeight Approx. 450g

Part Numbers For HG1B

Part Number DescriptionHG1B-SB22WF RS-232C Host/RS-485 HostHG1B-SB22JF RS422 HostHG9Y-ZSS2W WindOI-NV2 Software

HG1B Cables

Part Number DescriptionHG9Z-XCM1A or FC2A-KC4C Programming cable for HG1B series (PC to operator interface)HG9Z-XC12A Cable between HG1B series (RS232) and FA series IDEC PLC HG9Z-XC19A Cable between HG1B series (RS485) and IDEC Micro3 PLCHG9Z-XC11A or HG9Z-XC14A Cable between HG1B series (RS232) and IDEC Micro3 PLC (FC2A-KC2 cable is required)HG9Z-XC183 Cable between HG1B series (RS232) and IDEC Micro3C/ONC/MicroSmart (port2) PLCsHG9Z-XC100 Cable between HG1B series (RS232) and AB-SLC 503/504 PLCFC4A-KC1CA Cable between HG1B series (RS232) and IDEC MicroSmart (port1 and port2)HG9Z-XC300 Cable between HG1B series (RS232) and Aromat FPO PLCHG9Z-XC400 Cable between HG1B series (RS232) and Koyo DL240 PLCHG9Z-XC500 Cable between HG1B series (RS232) and AB-Micrologix PLCsHG9Z-XC305 Cable between HG1B series (RS232) and Mitsubishi FX2N

HG1B Divers (included with software)


Just Right. Good things come in small

packages, like the HG1B operator interface. The

full-touch monochrome LCD screen has 48 distinct

touch regions with a response time of 300 msec.

Not only does it have bitmap and graphic display

capabilities or bar graph indicators, you can choose

from a library of images and graphics to create the

perfect screens. To help you communicate with

operators, the HG1B has an internal buzzer and the

screen can be configured to flash at different rates

depending on the severity of the alarm. The HG1B

can link to PLCs or other machines through RS232

or RS485 ports, both built-in, and drivers are also

available for non-IDEC PLCs.

• Compact housing — 5.7" x 3" x 2.8"

• 127KB memory, configure up to 100 pages

• Internal buzzer capable of up to 32 alarms

• Built-in communication ports (RS232, RS485 and RS422)

• Bar graph indicators

• Programmable with Wind-OI/NV2 (see page 18)

Installation Panel Thickness 1.6~5mm

64mm5mm

75mm

146mm

138mm

66mm

10 11

New in 2003! Sometimes all you need is

a simple text interface, so IDEC offers the HG1X

Series of text message displays. The three HG1X

models all feature bright, backlit LCD screens, inte-

grated function keys, and a flexible, user-definable

program interface. The newest in this family is the

eight-line version, a crisp, monochrome display with

four function keys, an integrated numeric keypad,

and navigation keys. The HG1X 8-line unit requires

24V DC power, and each unit has a serial port for

printing screens and alarms. Program HG1X dis-

plays with Wind-MSG, a Windows-based software

program specifically designed to work with the

HG1X series.

• 8-line, 20-character display

• Bitmap Graphic Capability

• UL1604 for hazardous locations

• Serial port for printing screens and alarms

• User-definable function keys

• Keys have different functions depending on active screen

• Supports RS232 and RS485

• Programmable with Wind-MSG (see page 19)

HG1X-8 Specifications


Type Item DescriptionStandards Safety standards UL508, UL1604

EMC standards Immunity to ESD: Level 3 as per IEC61000-4-2; Transient Immunity: Level 3 as per IEC61000-4-4; Radiated Immunity: Level 3 as per IEC61000-4-3; Emissions: EN55011 CISPR A; Conducted RF Susceptibility: As per IEC61000-4-6

Electrical Rated voltage 24V DC (Suggested power supply - IDEC PS5R Series)Voltage variation range 24 VDC (± 10%) Power consumption 2.5 Watt; 3 Watt MaximumInrush current 115mA at 24VDC

Environmental Operating temperature range 0-50°C Operating humidity range 10% to 90% (Non Condensing)Degree of protection IP65 StandardsStorage temperature –20 to 80°CStorage humidity 95% RHVibration resistance 10 to 61.2Hz, @ 0.2mm displacement 61.2Hz to 150Hz @ 1.5G acceleration (on all axes)Shock resistance 1.5G acceleration for 11ms, 2 shocks per sense per axis (on all axes)

Structural Installation Panel mountExterior dimensions (WxHxD) 183mm x 101mm x 37mmPanel cutout dimensions (WxH) 162mm x 79mmWeight Approx. 366g

HG1X-222/422/822 Cables

Part Number for HG1X-222/422/822 DescriptionHG9Z-PC125A Programming Cable for HG1X series (From PC to HG1X)HG9Z-SCI220 Cable between HG1X and Micro3 PLCHG9Z-SCI200 Cable between HG1X and Micro3C PLC/ONC/MicroSmartHG9Z-SCI100 Cable between AB-Micrologix series and HG1XHG9Z-SCI120 Cable between SLC-500 series and HG1XHG9Z-SCI600 Cable between Mitsubishi FX0 and HG1XHG9Z-SCI500 Cable between Aromat FPO/FPM and HG1XHG9Z-SCI400 Cable between Koyo 205 series and HG1XHG9Z-SCI300 Cable between Siemens S7-200 and HG1X

Part Numbers For HG1X-8

Part Number DescriptionHG1X-822 HG1X 8-Line Character DisplayWINDMSG Wind-MSG Software

HG1X Series Drivers (included with software)


183 mm

37 mm162 mm

10

1

mm

79

mm

Bezel Gasket (For IP65 Sealing)

Panel

CUTOUT

HG1X-822 - Dimensions/Panel Cutout

12 13

New in 2003! Sometimes all you need is

a simple text interface, so IDEC offers the HG1X

Series of text message displays. The three HG1X

models all feature bright, backlit LCD screens, inte-

grated function keys, and a flexible, user-definable

program interface. The newest in this family is the

eight-line version, a crisp, monochrome display with

four function keys, an integrated numeric keypad,

and navigation keys. The HG1X 8-line unit requires

24V DC power, and each unit has a serial port for

printing screens and alarms. Program HG1X dis-

plays with Wind-MSG, a Windows-based software

program specifically designed to work with the

HG1X series.


• Bitmap Graphic Capability

• UL1604 for hazardous locations


• User-definable function keys


• Supports RS232 and RS485






Electrical Rated voltage 24V DC (Suggested power supply - IDEC PS5R Series)Voltage variation range 24 VDC (± 10%) Power consumption 2.5 Watt; 3 Watt MaximumInrush current 115mA at 24VDC

Environmental Operating temperature range 0-50°C Operating humidity range 10% to 90% (Non Condensing)Degree of protection IP65 StandardsStorage temperature –20 to 80°CStorage humidity 95% RHVibration resistance 10 to 61.2Hz, @ 0.2mm displacement 61.2Hz to 150Hz @ 1.5G acceleration (on all axes)Shock resistance 1.5G acceleration for 11ms, 2 shocks per sense per axis (on all axes)

Structural Installation Panel mountExterior dimensions (WxHxD) 183mm x 101mm x 37mmPanel cutout dimensions (WxH) 162mm x 79mmWeight Approx. 366g

HG1X-222/422/822 Cables

Part Number for HG1X-222/422/822 DescriptionHG9Z-PC125A Programming Cable for HG1X series (From PC to HG1X)HG9Z-SCI220 Cable between HG1X and Micro3 PLCHG9Z-SCI200 Cable between HG1X and Micro3C PLC/ONC/MicroSmartHG9Z-SCI100 Cable between AB-Micrologix series and HG1XHG9Z-SCI120 Cable between SLC-500 series and HG1XHG9Z-SCI600 Cable between Mitsubishi FX0 and HG1XHG9Z-SCI500 Cable between Aromat FPO/FPM and HG1XHG9Z-SCI400 Cable between Koyo 205 series and HG1XHG9Z-SCI300 Cable between Siemens S7-200 and HG1X


Part Number DescriptionHG1X-822 HG1X 8-Line Character DisplayWINDMSG Wind-MSG Software



183 mm

37 mm162 mm

10

1

mm

79

mm


Panel

CUTOUT

HG1X-822 - Dimensions/Panel Cutout

12 13

Four By Four. The HG1X four-line text

message display takes all the functionality of the

larger eight-line display and condenses it. The inte-

grated numeric keyboard makes this an excellent

tool for applications requiring frequent data entry

into PLC registers. Each of the eight function keys

can be programmed for multiple operations using

Wind-MSG software. The bright, backlit LCD

screen can display data, alarms, errors, and data

entry objects in several formats, from simple text to

integer, unsigned integer, long integer, or float. Some

data can be displayed as a bar graph. The user can

define as many screens as the 24K unit memory

allows, and up to 256 alarms in the PLC.


• No external power supply required, unit draws power from PLC port (for HG1X-452 unit only)

• Numeric keyboard

• UL 1604 for hazardous locations

• Assign multiple actions to a single keystroke


• Supports RS232 and RS485 (HG1X-422); (HG1X-452: RS232 only)







Electrical Rated voltage 5V DC (for HG1X-452), 24V DC (for HG1X-422)Voltage variation range ± 5% maximum (for HG1X-452), ± 10% maximum (for HG1X-422)Power consumption 160mA maximum (for HG1X-452), 1.5 Watt; 3 Watt Maximum (for HG1X-422)Inrush current N/A (for HG1X-452), 55mA @24V DC (for HG1X-422)

Environmental Operating temperature range 0-55°C operation (for HG1X-452), 0-50°C operation (for HG1X-422)Operating humidity range 0-90% non condensing (for HG1X-452), 10-90% non condensing (for HG1X-422)Degree of protection IP65Storage temperature –25 to 80°C (for HG1X-452), –20 to 80°C (for HG1X-422)Storage humidity 90% RH (for HG1X-452), 95% RH (for HG1X-422)Vibration resistance 10 to 61.2Hz, @ 0.2mm displacement 61.2Hz to 150Hz @ 1.5G acceleration (on all axes)Shock resistance 1.5G acceleration for 11ms, 2 shocks per sense per axis (on all axes)

Structural Installation Panel mountExterior dimensions (WxHxD) 183mm x 101mm x 37mm Panel cutout dimensions (WxH) 161mm x 79mm Weight Approx. 318g (HG1X-452), Approx. 340g (HG1X-422)

HG1X-452 and HG1X-422 Series Cables

Part Number for HG1X-252/452 DescriptionHG9Z-PC125A Programming Cable for HG1X series (From PC to HG1X)HG9Z-SCI25A Cable between HG1X and Micro3 PLCHG9Z-SCI25B Cable between HG1X and Micro3C PLC/ONC/MicroSmartHG9Z-SCI007 Cable between AB-Micrologix series and HG1XHG9Z-SCI008 Cable between Mitsubishi FX0 and HG1XHG9Z-SCI015 Cable between Aromat FPO/FPM and HG1XHG9Z-SCI023 Cable between Koyo 205 series and HG1XHG9Z-SCI029 Cable between Siemens S7-200 and HG1XPart Number for HG1X-222/422/822 DescriptionHG9Z-PC125A Programming Cable for HG1X series (From PC to HG1X)HG9Z-SCI220 Cable between HG1X and Micro3 PLCHG9Z-SCI200 Cable between HG1X and Micro3C PLC/ONC/MicroSmartHG9Z-SCI100 Cable between AB-Micrologix series and HG1XHG9Z-SCI120 Cable between SLC-500 series and HG1XHG9Z-SCI600 Cable between Mitsubishi FX0 and HG1XHG9Z-SCI500 Cable between Aromat FPO/FPM and HG1XHG9Z-SCI400 Cable between Koyo 205 series and HG1XHG9Z-SCI300 Cable between Siemens S7-200 and HG1X


Part Number DescriptionHG1X-452 HG1X 4-Line Character Display, External Power Not RequiredHG1X-422 HG1X 4-Line Character Display, 24V DC typeWINDMSG Wind-MSG Configuration Software


IDEC • Allen Bradley - DF1* • Omron• Mitsubishi • Modicon • Aromat • Siemens • PLC Direct • KeyenceMore drivers available at www.idec.com/usa

* HG1X-452 supports AB-Micrologix only. HG1X-422 supports AB-SLC500 and Micrologix Series

182.50 mm

CUTOUT

36.80 mm160.70 mm

10

1.3

0 m

m

78

.50

mm


Panel

HG1X-422 and -452 - Dimensions/Panel Cutout

14 15

Four By Four. The HG1X four-line text

message display takes all the functionality of the

larger eight-line display and condenses it. The inte-

grated numeric keyboard makes this an excellent

tool for applications requiring frequent data entry

into PLC registers. Each of the eight function keys

can be programmed for multiple operations using

Wind-MSG software. The bright, backlit LCD

screen can display data, alarms, errors, and data

entry objects in several formats, from simple text to

integer, unsigned integer, long integer, or float. Some

data can be displayed as a bar graph. The user can

define as many screens as the 24K unit memory

allows, and up to 256 alarms in the PLC.



• Numeric keyboard


• Assign multiple actions to a single keystroke











Structural Installation Panel mountExterior dimensions (WxHxD) 183mm x 101mm x 37mm Panel cutout dimensions (WxH) 161mm x 79mm Weight Approx. 318g (HG1X-452), Approx. 340g (HG1X-422)

HG1X-452 and HG1X-422 Series Cables



Part Number DescriptionHG1X-452 HG1X 4-Line Character Display, External Power Not RequiredHG1X-422 HG1X 4-Line Character Display, 24V DC typeWINDMSG Wind-MSG Configuration Software


IDEC • Allen Bradley - DF1* • Omron• Mitsubishi • Modicon • Aromat • Siemens • PLC Direct • KeyenceMore drivers available at www.idec.com/usa


182.50 mm

CUTOUT

36.80 mm160.70 mm

10

1.3

0 m

m

78

.50

mm


Panel


14 15

Less is more! The smallest, most afford-

able model in the HG family, the HG1X two-line

display has a bright, backlit LCD screen, and is ideal

for interfacing with PLCs that lack integrated dis-

plays. The six function keys are user definable for

several operations, and can have different functions

depending on the active screen; they can also be

used to navigate certain screens. HG1X displays are

panel mountable, rated UL1604 and UL508, and are

compatible with all IDEC PLCs and several other

major manufacturers' controllers. They are also

CE-marked for international compliance. The

Wind-MSG programming software also includes

drivers for non-IDEC PLCs.

• 2-line, 16 character display


• Six programmable function keys


• Assign actions to a combination of keys










Structural Installation Panel mountExterior dimensions (WxHxD) 108mm x 61mm x 27mmPanel cutout dimensions (WxH) 92mm x 45mmWeight Approx. 137g (HG1X-252)

Approx. 150g (HG1X-222)

HG1X Series Cables



Part Number DescriptionHG1X-252 HG1X 2-Line Character Display, External Power Not RequiredHG1X-222 HG1X 2-Line Character Display, 24V DC typeWINDMSG Wind-MSG Software


IDEC • Allen Bradley - DF1* • Omron • Mitsubishi • Modicon • Aromat • Siemens • PLC Direct • KeyenceMore drivers available at www.idec.com/usa


108.30 mm

27.10 mm91.20 mm

60

.50

m

m

44

.18

mm


Panel

CUTOUT


16 17

Less is more! The smallest, most afford-

able model in the HG family, the HG1X two-line

display has a bright, backlit LCD screen, and is ideal

for interfacing with PLCs that lack integrated dis-

plays. The six function keys are user definable for

several operations, and can have different functions

depending on the active screen; they can also be

used to navigate certain screens. HG1X displays are

panel mountable, rated UL1604 and UL508, and are

compatible with all IDEC PLCs and several other

major manufacturers' controllers. They are also

CE-marked for international compliance. The

Wind-MSG programming software also includes

drivers for non-IDEC PLCs.

• 2-line, 16 character display


• Six programmable function keys


• Assign actions to a combination of keys










Structural Installation Panel mountExterior dimensions (WxHxD) 108mm x 61mm x 27mmPanel cutout dimensions (WxH) 92mm x 45mmWeight Approx. 137g (HG1X-252)

Approx. 150g (HG1X-222)

HG1X Series Cables



Part Number DescriptionHG1X-252 HG1X 2-Line Character Display, External Power Not RequiredHG1X-222 HG1X 2-Line Character Display, 24V DC typeWINDMSG Wind-MSG Software


IDEC • Allen Bradley - DF1* • Omron • Mitsubishi • Modicon • Aromat • Siemens • PLC Direct • KeyenceMore drivers available at www.idec.com/usa


108.30 mm

27.10 mm91.20 mm

60

.50

m

m

44

.18

mm


Panel

CUTOUT


16 17

With IDEC's newest touchscreens and software, it's easy to join multiple O/I units

to one PLC with a Master/Slave network. With no extra software, no special

cables, and only one additional module, you can create an O/I Link with any

HG2F, HG3F, or HG4F and any PLC. Using this communication setup, the

Master O/I can read data from the slave O/Is, and the slaves can write to the PLC

via the Master. The Master will read data directly from the specified PLC devices

and the slaves read through the Master.

WindO/I-NV2 comes with all the tools you need to set up an O/I Link, and the

only extra hardware you will need is an adapter module (part number HG9Z-2G1)

for each touchscreen in the network.

When you want the flexibility of a touchscreen with the assurance of a pushbutton,

then you need the HG2F-C with CC CLICK™ technology, developed and patented

by IDEC Corporation. With CC CLICK™, a plastic overlay with four distinct

buttons covers the bottom of the screen. These buttons provide the tactile and audio

feedback you can't get with other touchscreens, without sacrificing the programming

flexibility of the HG2F. Use WindOI/NV 2 to configure the buttons to match your

most frequently needed tasks, such as acknowledging alarms, starting or stopping

operations, or checking status. Each button can have different functions depending on

the active screen. CC CLICK™ is available only with the HG2F operator interfaces.

Wind-MSGWindO/I-NV2®

WindO/I-NV2 to program the HG1B, HG2F,

HG3F, and HG4F models

• 50 MB hard disk space

• 32 MB RAM

• Resolution: 800 x 600 (VGA) or better

• Serial mouse

WindMSG to program the HG1X series requires


• 16 MB RAM


• 16 color display minimum

• Serial mouse

Positive Feedback

18 19

A Quick O/I Link

IDEC offers software to assist you in programming your HG

family interfaces. Both programs use the same intuitive graphic

user interface (GUI) and are uniquely tailored to suit the

features and requirements of the different O/Is. The programs

require a PC with Microsoft Windows 95 or higher, and at

least a Pentium-class processor.

Compact Flash Supportfor HG3F/HG4F

Tactile Feedback Buttons

With IDEC's newest touchscreens and software, it's easy to join multiple O/I units

to one PLC with a Master/Slave network. With no extra software, no special

cables, and only one additional module, you can create an O/I Link with any

HG2F, HG3F, or HG4F and any PLC. Using this communication setup, the

Master O/I can read data from the slave O/Is, and the slaves can write to the PLC

via the Master. The Master will read data directly from the specified PLC devices

and the slaves read through the Master.

WindO/I-NV2 comes with all the tools you need to set up an O/I Link, and the

only extra hardware you will need is an adapter module (part number HG9Z-2G1)

for each touchscreen in the network.

When you want the flexibility of a touchscreen with the assurance of a pushbutton,

then you need the HG2F-C with CC CLICK™ technology, developed and patented

by IDEC Corporation. With CC CLICK™, a plastic overlay with four distinct

buttons covers the bottom of the screen. These buttons provide the tactile and audio

feedback you can't get with other touchscreens, without sacrificing the programming

flexibility of the HG2F. Use WindOI/NV 2 to configure the buttons to match your

most frequently needed tasks, such as acknowledging alarms, starting or stopping

operations, or checking status. Each button can have different functions depending on

the active screen. CC CLICK™ is available only with the HG2F operator interfaces.

Wind-MSGWindO/I-NV2®

WindO/I-NV2 to program the HG1B, HG2F,

HG3F, and HG4F models


• 32 MB RAM


• Serial mouse

WindMSG to program the HG1X series requires


• 16 MB RAM


• 16 color display minimum

• Serial mouse

Positive Feedback

18 19

A Quick O/I Link

IDEC offers software to assist you in programming your HG

family interfaces. Both programs use the same intuitive graphic

user interface (GUI) and are uniquely tailored to suit the

features and requirements of the different O/Is. The programs

require a PC with Microsoft Windows 95 or higher, and at

least a Pentium-class processor.

Compact Flash Supportfor HG3F/HG4F

Tactile Feedback Buttons

IDEC CORPORATION1175 Elko Drive

Sunnyvale, CA 94089-2209, USA

Tel (408) 747-0550

Toll Free (800) 262-IDEC

Fax (408) 744-9055

Fax (800) 635-6246


www.idec.com

IDEC CANADA LIMITEDUnit 22-151 Brunel Road

Mississauga, Ontario, L4Z 1X3, Canada

Tel (905) 890-8561

Toll Free (888) 317-4332

Fax (905) 890-8562

IDEC AUSTRALIA PTY. LTD.2/3 Macro Court

Rowville, Victoria 3178, Australia

Toll Free 1-800-68-4332

Fax +61-3-9763-3255


IDEC IZUMI CORPORATION7-31, Nishi-Miyahara

1-Chome, Yodogawa-ku

Osaka 532-8550, Japan

Tel +81-6-6398-2571

Fax +81-6-6392-9731

www.izumi.com

IDEC EUROPEAN HEADQUARTERSUnit 2 Beechwood

Chineham Business Park

Basingstoke

Hampshire RG24 8WA, United Kingdom

Tel +44-1256-321000

Fax +44-1256-327755


IDEC ELEKTROTECHNIK GmbHWendenstraße 331

D-20537 Hamburg, Germany

Tel +49-40-2530540

Fax +49-40-25305424


IDEC IZUMI (H.K.) CO., LTD.Room No.1409, Tower 1 Silvercord

30 Canton Road, Tsimshatsui

Kowloon, Hong Kong

Tel +852-2-376-2823

Fax +852-2-376-0790

IDEC IZUMI ASIA PTE. LTD.No. 31, Tannery Lane #05-01

Dragon Land Building,

Singapore 347788

Tel +65-6746-1155

Fax +65-6844-5995

IDEC TAIWAN CORPORATION8F-1, No.79, Hsin Tai Wu Road, Sec. 1

Hsi-Chih, Taipei County, Taiwan, (ROC)

Tel +886-2-2698-3929

Fax +886-2-2698-3931


IDEC IZUMI (SHANGHAI) Co., LTD.Room E, 15F, Majesty Building

No. 138 Pudong Avenue

Shanghai 200120, P.R.C.

Tel +86-21-5887-9181

Fax +86-21-5887-8930

www.idec.com/usa©2003 IDEC Corporation. All Rights Reserved.

Catalog No. EP991-1 04/03 10K

Programmable Logic Controller

Conforming to world-wide standards

PRODUCT SERVICE

MicroSmartE X P A N D I N G Y O U R C O N T R O L

• Two types of CPU modules: All-in-one and slim types.

• Expansion of I/O terminals is possible (All-in-one type: up to 88 I/O,

Slim type: up to 264 I/O)

• In addition to the RS232C port built into the CPU module, another communication port can be added using a communication adapter or communication module (RS232C or RS485).

• The analog voltage input function on the slim type CPU module and analog I/O module enhances the processing capacity of analog signals.

For information, please refer to the MicroSmart catalog.

Universal AC input voltage function (100-240V AC)DIN rail mount type power supplies, available in:

7.5W, 15W, 30W, 50W, 75W, 100W, 120W, and 240W

For information, please refer to the new PS5R catalog.

PS5RSwitching Power Supplies

S e r i e s

Documents

Sunnyvale, CA 94089-2209, USA MicroSmart · Sunnyvale, CA 94089-2209, USA Tel (408) 747-0550 Toll Free (800) 262-IDEC Fax (408) 744-9055 Fax (800) 635-6246 E-mail: [email protected]