TEST REPORT · 26.11.2018 · Sample Description: One (1) group of submitted samples said to be : Item name : Mushroom Garden Item no. : 2221,2222,2223,2224,2225,2226,2227,2228,2229

TEST REPORT Number : TWNH00075191S1

Authorized By: Signed by: On behalf of Intertek Testing Services Taiwan Limited Matt Wang Thomas Chou Sr. Manager Manager

*TMJ0075191* Page 1 of 17 Intertek Testing Services Taiwan Ltd. 全國公證檢驗股份有限公司

8F., No. 423, Ruiguang Rd., Neihu District, Taipei, 11492, Taiwan, R.O.C. 11492台北市內湖區瑞光路 423號 8樓

Tel: (+886-2) 6602-2888．2797-8885 Fax: (+886-2) 6602-2420 www.intertek-twn.com

Applicant: BEST LEARNING MATERIALS CORP. Date : Nov 26, 2018 9F, No. 303, Fu-Xing N. Rd.,

Songshan District, Taipei City 105, Taiwan, R.O.C.

This is to supersede Report No. TWNH00075191 Dated Nov 22, 2018

Sample Description: One (1) group of submitted samples said to be : Item name : Mushroom Garden Item no. : 2221,2222,2223,2224,2225,2226,2227,2228,2229 Quantity : 1 Group Country of origin : China Goods exported to : USA, CA Date sample received : Nov 15, 2018 Date test started : Nov 15, 2018

Test Conducted:

As requested by the applicant, for details please refer to attached pages.

Conclusion:

Please see page two to three.

Remarks:

#1 = Results were transferred from report No. TWNH00074894 dated Nov 21, 2018. #2 = Results were transferred from report No. TWNH00072249 dated Jul 27, 2018. #3 = Results were transferred from report No. TWNH00072243 dated Sep 10, 2018.






Conclusion: Tested sample Standard Result Submitted Samples Physical And Mechanical Properties

－ As per ASTM F963-17 excluding section 7.1

Pass

Flammability Test Of Materials Other Than Textile Materials － ASTM F963-17, section 4.2

Pass

Battery – Operated Toys － As per section 4.25 Of ASTM F963-17

Pass

Tested Components Of Submitted Samples

Toxic Elements Analysis On Coating － As per ASTM F963-17 standard Consumer Safety Specification

For Toy Safety

Pass

Toxic Elements Analysis In Substrate － As per ASTM F963-17 standard Consumer Safety Specification

For Toy Safety

Pass

Total Lead (Pb) Content In Surface Coating － As Per U.S. Consumer Product Safety Improvement Act 2008,

Title I, Section 101

Pass

Total Lead (Pb) Content In Non-Surface Coating Materials (Substrate) － As Per U.S. Consumer Product Safety Improvement Act 2008,

Title I, Section 101

Pass

Phthalates Content － As per US 16 CFR Part 1307 for Prohibition of Children’s Toys

and Child Care Articles Containing Specified Phthalates

Pass

－ As Per Applicant’s Request With Reference To California Proposition 65 for toy (Consent Judgement no. BG-350969)

Pass

Submitted Samples Physical and mechanical test － As per Canada Hazardous Products (Toys) Regulation SOR/2011-

17 and Amendment SOR/2016-195

Pass

Cellulose nitrate and celluloid － Canada Consumer Product Safety Act Toys Regulations SOR/2011-

17 section 21 for celluloid or cellulose nitrate

Pass






Conclusion: Tested sample Standard Result Tested Components Of Submitted Samples

Toxic Element Analysis － As per Toys Regulations (SOR/2011-17) and Amendment

SOR/2016-195 under Canada Consumer Product Safety Act (CCPSA)

Pass

Toxic Elements Analysis In Plastic Material － As per Toys Regulations (SOR/2011-17) and Amendment

SOR/2016-195 under Canada Consumer Product Safety Act (CCPSA)

Pass

Total Lead (Pb) Content － As per Consumer Products Containing Lead Regulations

(SOR/2018-83) under Canada Consumer Product Safety Act (CCPSA)

Pass

Phthalates In Toys And Childcare Articles － As per Phthalates Regulations (SOR/2016-188) under Canada

Consumer Product Safety Act (CCPSA)

Pass

TEST REPORT Number : TWNH00075191S1 Test Conducted




1. Physical And Mechanical Properties

As per ASTM F963-17 standard consumer safety specification for toy safety. Age labeling on package / toy：For ages over 12 months Is age label appropriate＊1 ：Yes Age grading specified by applicant for testing: For ages over 12 months

Section Testing items Assessment 4.1 Material quality (visual check on cleanliness) P 4.3.7 Stuffing material (visual check on contaminations) NA 4.5＊ Sound-producing toys P 4.6 Small objects 4.6.1＊ Toys intended for children under 36 months P 4.6.2 Mouth-actuated toys NA 4.6.3 Toys and games for 36 months to 72 months NA 4.7＊ Accessible edges P 4.8＊ Projections NA 4.9＊ Accessible points P 4.10＊ Wires or rods NA 4.11 Nails and fasteners P 4.12 Plastic film NA 4.13＊ Folding mechanisms and hinges NA 4.14＊ Cords, straps and elastics NA 4.15＊ Stability and over-load requirements NA 4.16 Confined spaces NA 4.17＊ Wheels, tires and axles NA 4.18＊ Holes, clearance and accessibility of mechanisms NA 4.19＊ Simulated protective devices (such as helmets, hats and goggles) NA 4.20 Pacifiers NA 4.21＊ Projectiles toys NA 4.22＊ Teethers and teething toys NA 4.23＊ Rattles NA 4.24 Squeeze toys NA 4.25＊ Battery-operated toys P 4.26 Toys intended to be attached to a crib or playpen NA 4.27 Stuffed and beanbag-type toys NA 4.28 Stroller and carriage toys NA 4.29 Art materials NA 4.30 Toy gun marking NA 4.31 Balloons NA 4.32 Certain toys with nearly spherical ends NA 4.33 Marbles NA 4.34 Balls NA 4.35 Pompoms NA 4.36 Hemispheric-shape objects NA





1. Physical And Mechanical Properties

Section Testing items Assessment 4.37 Yo Yo elastic tether toys NA 4.38＊ Magnets NA 4.39 Jaw entrapment in handles and steering wheels NA 4.40 Expanding Materials NA 4.41 Toy chests NA 5. Labeling requirements P 6. Instructional literature P 7. Producer’s markings P

Remarks : ＊ = The submitted samples were tested in accordance with the requirements of section

8.5 through section 8.23 e.g. Normal use testing, drop test, torque test, tension test, compression test, flexure test etc. whichever is applicable.

＊1 = Reference material CPSC’s age determination guidelines 2002 and ASTM F963-17 annex A1. The most stringent test is applied if the toy or its package is not age labeled in a clear and conspicuous manner, or, based on such factors as marketing practiced and the customary patterns of usage of the toy.

P = Pass NA = Not applicable

2. Flammability Test

As per section 4.2 of ASTM F963-17 standard consumer safety specification on toy safety.

Specimen Burn length (inch)

Time (second)

Burn rate (inch/

second)

Round burn rate (inch/ second)

Limit (inch/ second)

Assessment

Submitted Samples - - IBE - 0.10 P

Remarks : P = Pass IBE = Ignite but self-extinguished In order to pass this criteria the test product shall meet one of the following conditions： A) Have burn rate of less than 0.10 inch/second. (Round the burn rate to the nearest tenth ,that is round 0.04 up to 0, 0.06 up to 0.10, 0.15 up to 0.2) B) DNI ＝ Did not ignite. C) IBE ＝ Ignited but self-extinguished in a very short period which cannot be measured accurately.





3. Battery-Operated Toys

As per ASTM standard consumer safety specification on toy safety F963-17 section 4.25, 5.15, 6.5 & 6.6.

Labelled age group : For ages over 12 months Is labelled age group appropriate : Yes Age grading for testing : For ages over 12 months

Section Testing items Assessment 4.25.1 Battery marking P Instruction requirement - 5.15 Non-replaceable batteries NA 4.25.2 Maximum allowable direct current potential P 4.25.3 Protection against charging non-

Rechargeable battery P

4.25.4 Accessible batteries P 4.25.5 Accessible batteries that can fit

completely within small part cylinder P

4.25.6 Isolation of batteries of different types or capacities P 4.25.7 Temperature of battery surface P 4.25.8 Temperature of battery surface or combustion hazard after normal

use and Abuse test P

4.25.9 Instruction requirement - 6.5 Instruction on safe battery usage P 4.25.10 Battery-powered ride on toys NA 4.25.11 Toys that contain secondary cells or secondary batteries NA

Remark : P = Pass ; NA = Not applicable





4. Toxic Elements Analysis On Coating

As per section 8.3.2,8.3.3 and 8.3.4 of the ASTM F963-17 and CPSIA Test Method: CPSC-CH-E1003-09.1, acid digestion and extraction methods were used and toxic elements content were determined by Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and Atomic Absorption Spectrophotometer (AAS).

Element Result (mg/kg) DL

(mg/kg) Limit

(mg/kg)

(2) (14) (16)(#1) Tot. Lead (Pb) ND ND ND 20 90 Sol. Lead (Pb) ND ND ND 5 90 Sol. Cadmium (Cd) ND ND ND 5 75 Sol. Antimony (Sb) ND ND ND 5 60 Sol. Chromium (Cr) ND ND ND 5 60 Sol. Barium (Ba) ND ND ND 5 1000 Sol. Mercury (Hg) ND ND ND 5 60 Sol. Selenium (Se) ND ND ND 5 500 Sol. Arsenic (As) ND ND ND 2.5 25

Remarks: mg/kg = Milligram per kilogram based on dry weight of sample Tot. = Total Sol. = Soluble ND = Not detected DL = Detection limit The results of soluble elements content were adjusted by subtracting analytical correction factor.

5. Toxic Elements Analysis In Substrate

As per section 8.3.5 of the ASTM F963-17 and CPSIA Test Method: CPSC-CH-E1001-08.3 (metal substrates) and CPSC-CH-E1002-08.3 (non-metal substrates), acid digestion and extraction methods were used and toxic elements content were determined by Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and Atomic Absorption Spectrophotometer (AAS).


(mg/kg) Limit

(mg/kg) (1) (3) (4) (5) (6) (7) (8) Tot. Lead (Pb) ND ND ND ND ND ND ND 20 100 Sol. Lead (Pb) ND ND ND ND ND ND ND 5 90 Sol. Cadmium (Cd) ND ND ND ND ND ND ND 5 75 Sol. Antimony (Sb) ND ND ND ND ND ND ND 5 60 Sol. Chromium (Cr) ND ND ND ND ND ND ND 5 60 Sol. Barium (Ba) ND ND ND ND ND ND ND 5 1000 Sol. Mercury (Hg) ND ND ND ND ND ND ND 5 60 Sol. Selenium (Se) ND ND ND ND ND ND ND 5 500 Sol. Arsenic (As) ND ND ND ND ND ND ND 2.5 25





5. Toxic Elements Analysis In Substrate

Element Result (mg/kg) DL (mg/kg)

Limit (mg/kg)

(9) (10) (11) (12) (13) (15) (17)(#4) Tot. Lead (Pb) ND ND ND ND ND ND ND 20 100 Sol. Lead (Pb) ND ND ND ND ND ND -- 5 90 Sol. Cadmium (Cd) ND ND ND ND ND ND -- 5 75 Sol. Antimony (Sb) ND ND ND ND ND ND -- 5 60 Sol. Chromium (Cr) ND ND ND ND ND ND -- 5 60 Sol. Barium (Ba) ND ND ND ND 8 ND -- 5 1000 Sol. Mercury (Hg) ND ND ND ND ND ND -- 5 60 Sol. Selenium (Se) ND ND ND ND ND ND -- 5 500 Sol. Arsenic (As) ND ND ND ND ND ND -- 2.5 25

Remarks: mg/kg = Milligram per kilogram based on weight of sample Tot. = Total Sol. = Soluble ND = Not detected DL = Detection limit #4 = According to ASTM F963-17 section 4.3.5.2(1), the tested component was not within

the scope for soluble test requirement. The results of soluble elements content were adjusted by subtracting analytical correction factor.

6. Total Lead (Pb) Content In Surface Coating

According to CPSIA Test Method: CPSC-CH-E1003-09.1, by acid digestion method and Atomic Absorption Spectrophotometer (AAS) analysis.

Tested Component Result (ppm) Limit (ppm)

(2) ND 90 (14) ND 90

(16)(#1) ND 90

Remarks: ppm = Parts per million = mg/kg ND = Not detected Detection limit = 20 ppm





7. Total Lead (Pb) Content In Non-Surface Coating Materials (Substrate)

According to CPSIA Test Method: CPSC-CH-E1002-08.3(non-metal) and CPSC-CH-E1001-08.3(metal), by acid digestion and Atomic Absorption Spectrophotometer (AAS) analysis.


(1) ND 100 (3) ND 100 (4) ND 100 (5) ND 100 (6) ND 100 (7) ND 100 (8) ND 100 (9) ND 100 (10) ND 100 (11) ND 100 (12) ND 100 (13) ND 100 (15) ND 100 (17) ND 100

Remarks: ppm = Parts per million = mg/kg ND = Not detected Detection limit = 20 ppm





8. Phthalates Content

According to CPSIA Test Method: CPSC-CH-C1001-09.3, by solvent extraction and Gas Chromatographic-Mass Spectrometric (GC-MS) analysis.

Compound Result (%) (1/3/4)(#2) (2)(#2) (5/6/7)(#2) (8/9/10)(#2)

Limit A (%)

Limit B (%)

Diethyl hexyl phthalate (DEHP) ND ND ND ND 0.1 0.1 Benzyl butyl Phthalate (BBP) ND ND ND ND 0.1 0.1 Dibutyl phthalate (DBP) ND ND ND ND 0.1 0.1 Di-iso-decyl phthalate (DIDP) ND ND ND ND -- 0.1 Di-iso-nonyl phthalate (DINP) ND ND ND ND 0.1 -- Di-iso-butyl phthalate (DIBP) ND ND ND ND 0.1 -- Di-n-pentyl phthalate (DPENP) ND ND ND ND 0.1 -- Di-n-hexyl phthalate (DHEXP, DnHP) ND ND ND ND 0.1 0.1 Dicyclohexyl phthalate (DCHP) ND ND ND ND 0.1 --

Compound Result (%) (11/12)(#2) (13/15)(#2) (14)(#2) (16)(#3)

Limit A (%)

Limit B (%)

Diethyl hexyl phthalate (DEHP) ND ND ND ND 0.1 0.1 Benzyl butyl Phthalate (BBP) ND ND ND ND 0.1 0.1 Dibutyl phthalate (DBP) ND ND ND ND 0.1 0.1 Di-iso-decyl phthalate (DIDP) ND ND ND ND -- 0.1 Di-iso-nonyl phthalate (DINP) ND ND ND ND 0.1 -- Di-iso-butyl phthalate (DIBP) ND ND ND ND 0.1 -- Di-n-pentyl phthalate (DPENP) ND ND ND ND 0.1 -- Di-n-hexyl phthalate (DHEXP, DnHP) ND ND ND ND 0.1 0.1 Dicyclohexyl phthalate (DCHP) ND ND ND ND 0.1 --

Remarks: % = Percentage based on weight of tested sample ND = Not detected A = Limit of US 16 CFR Part 1307 B = Limit of California Proposition 65 Detection limit = 0.010% (for each compound) The above limit of California Proposition 65 was quoted from the Consent Judgement no.

BG-350969 settled by the Superior Court of the state of California for the County of Alameda, for toys based on the California Proposition 65.





9. Physical And Mechanical Test

As per Canada Hazardous Products (Toys) Regulation SOR/2011-17 and Amendment SOR/2016-195. Applicant’s specified age group for testing : For ages over 12 months

The submitted samples were undergone the use and abuse tests in accordance with the Canadian HazardousProducts (Toys) Regulations : Test Parameter Drop test 4 x 1.372 m Push / Pull test – General - Eye / Nose - Rattle

44.5 N 9.072 kg 50 N

Torque - Rattle 0.94 N-m

No. Testing items Assessment 3. General

(2) English and French bilingual statement packaging NA

4. Packaging NA 5. Electrical Hazards

NA

6. Electrically Operated Wood-Burning Tool NA 7. Mechanical hazard

Small parts P

8. Metal edges P 9. Wire NA 10. Plastic parts P 11. Wooden surfaces, edges and corners NA 12. Glass NA 13. Fasteners P 14. Folding mechanism, bracket or bracing NA 15. Spring-wound driving mechanism NA 16. Projectile component, other than a rocketry component. NA 17. Toys which a child can enter and which can

be closed by a lid or door(cont.) NA

18. Toys which are stationary and intended to Bear the weight of a child

NA

19. Auditory Hazard P 20. Thermal and flammability hazards NA 28. Dolls and soft toys

Fastening used to attach parts, clothing or ornamentation. NA

29. Stuffing materials (a) Clean and free from vermin. (b) Free from hard and sharp foreign matter (C) it must be non-toxic and non-irritant in accordance with Schedules 2 and 3.

(a) NA (b) NA (c) NA

30. Squeaker, reed, valve or other similar devices NA 31. Eyes or nose NA 35. A toy that is intended for use by a child of less than three years of age must not

contain plant seeds as pellets for making noise NA

36. A toy must not contain plant seeds as stuffing material NA 37. A pull and push toy that has a shaft-like handle NA 38. Toy steam engines NA 39. Finger paints NA





9. Physical And Mechanical Test

No. Testing items Assessment 40. Rattles NA 41. Elastic NA 42. Yo-yo type balls NA 43. Battery NA 44. Repeal 45. Carriages and strollers NA 46. Pacifiers NA 47. Playpens NA

Remarks : P =Pass; NA = Not applicable

10. Cellulose Nitrate And Celluloid

As per Canada Consumer Product Safety Act Toys Regulation SOR 2011-17 Section 21.

Assessment Requirement (a) Cellulose Nitrate Absent Absent (b) Celluloid Absent Absent

11. Toxic Elements Analysis

As per Toys Regulations (SOR/2011-17) and Amendment SOR/2016-195 under Canada Consumer Product Safety Act (CCPSA), acid digestion and extraction methods were used and toxic elements were determined by Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES).

Result (%) Limit (%) (2) (14) (16) Tot. Lead (Pb) ND ND ND 0.009 Tot. Mercury (Hg) ND ND ND ND Sol. Cadmium (Cd) ND ND ND 0.1 Sol. Antimony (Sb) ND ND ND 0.1 Sol. Barium (Ba) ND ND ND 0.1 Sol. Selenium (Se) ND ND ND 0.1 Sol. Arsenic (As) ND ND ND 0.1

Remarks: % = Percentage based on dry weight of sample ND = Not detected Tot. = Total Sol. = Soluble Detection Limit = 0.0010%





12. Toxic Elements Analysis in Plastic Material

As per section 8.3.5 of the ASTM F963-17 and CPSIA Test Method: CPSC-CH-E1002-08.3 (non-metal substrates), acid digestion and extraction methods were used and toxic elements content were determined by Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES) and Atomic Absorption Spectrophotometer (AAS).


(mg/kg) Limit

(mg/kg) (1) (3) (4) (5) (6) (7) (8) Tot. Lead (Pb) ND ND ND ND ND ND ND 20 90 Sol. Cadmium (Cd) ND ND ND ND ND ND ND 5 75 Sol. Antimony (Sb) ND ND ND ND ND ND ND 5 60 Sol. Barium (Ba) ND ND ND ND ND ND ND 5 1000 Sol. Mercury (Hg) ND ND ND ND ND ND ND 5 60 Sol. Selenium (Se) ND ND ND ND ND ND ND 5 500 Sol. Arsenic (As) ND ND ND ND ND ND ND 2.5 25


(mg/kg) Limit

(mg/kg) (9) (10) (11) (12) (13) (15) Tot. Lead (Pb) ND ND ND ND ND ND 20 90 Sol. Cadmium (Cd) ND ND ND ND ND ND 5 75 Sol. Antimony (Sb) ND ND ND ND ND ND 5 60 Sol. Barium (Ba) ND ND ND ND 8 ND 5 1000 Sol. Mercury (Hg) ND ND ND ND ND ND 5 60 Sol. Selenium (Se) ND ND ND ND ND ND 5 500 Sol. Arsenic (As) ND ND ND ND ND ND 2.5 25

Remarks: mg/kg = Milligram per kilogram based on dry weight of sample Tot. = Total Sol. = Soluble ND = Not detected DL = Detection limit The results of soluble elements content were adjusted by subtracting analytical correction factor.





13. Total Lead (Pb) Content

As per Consumer Products Containing Lead Regulations (SOR/2018-83) under Canada Consumer Product Safety Act (CCPSA), acid digestion method was used and total lead content was determined by Atomic Absorption Spectrophotometer (AAS).


(1) ND 90 (2) ND 90 (3) ND 90 (4) ND 90 (5) ND 90 (6) ND 90 (7) ND 90 (8) ND 90 (9) ND 90 (10) ND 90 (11) ND 90 (12) ND 90 (13) ND 90 (14) ND 90 (15) ND 90

(16)(#1) ND 90 (17) ND 90

Remarks: ppm = Parts per million based on dry weight of tested sample ND = Not Detected Detection Limit = 20 ppm





14. Phthalates In Toys And Childcare Articles

As per phthalates regulations (SOR/2016-188) under Canada Consumer Product Safety Act (CCPSA), solvent extraction method was used and determined by Gas Chromatographic-Mass Spectrometric (GC-MS).

I. Children’s Toy Or Child Care Article: Compound Result (ppm) Limit (ppm) (1/3/4)(#2) (2)(#2) (5/6/7)(#2) (8/9/10)(#2) Diethyl Hexyl Phthalate (DEHP) ND ND ND ND 1000 Dibutyl Phthalate (DBP) ND ND ND ND 1000 Benzyl Butyl Phthalate (BBP) ND ND ND ND 1000

Compound Result (ppm) Limit (ppm) (11/12)(#2) (13/15)(#2) (14)(#2) (16)(#3) Diethyl Hexyl Phthalate (DEHP) ND ND ND ND 1000 Dibutyl Phthalate (DBP) ND ND ND ND 1000 Benzyl Butyl Phthalate (BBP) ND ND ND ND 1000

II. Children’s Toy That Can Be Placed In A Child’s Mouth Or Child Care Article: Compound Result (ppm) Limit (ppm) (1/3/4)(#2) (2)(#2) (5/6/7)(#2) (8/9/10)(#2) Di-(Iso-Nonyl) Phthalate (DINP) ND ND ND ND 1000 Di-(Iso-Decyl) Phthalate (DIDP) ND ND ND ND 1000 Di-(N-Octyl) Phthalate (DNOP) ND ND ND ND 1000

Compound Result (ppm) Limit (ppm) (11/12)(#2) (13/15)(#2) (14)(#2) (16)(#3) Di-(Iso-Nonyl) Phthalate (DINP) ND ND ND ND 1000 Di-(Iso-Decyl) Phthalate (DIDP) ND ND ND ND 1000 Di-(N-Octyl) Phthalate (DNOP) ND ND ND ND 1000

Remarks: ppm = Parts per million = mg/kg ND = Not detected Detection limit = 50 ppm (for each compound)

Tested Components: (1) Light green plastic casing (2) White coating on ornament (3) Purple plastic ornament (4) Pink plastic ornament (5) Red plastic ornament (6) Orange plastic ornament (7) Yellow plastic ornament (8) Grass green plastic ornament (9) Sky blue plastic ornament (10) Blue plastic ornament (11) Light blue plastic button (12) Yellow plastic part of button (13) White plastic ornament (14) Green coating on casing (15) Green plastic casing (16) Red/white coating on casing (17) Silvery metal screw





Sample photo:

51

76

11

2/3

4 8 9

10

1312 14/15

16

17





Sample photo:

End of Report

Except where explicitly agreed in writing, all work and services performed by Intertek is subject to our standard Terms and Conditions which can be obtained at our website: http://www.intertek-twn.com/terms/. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. This report is made solely on the basis of your instructions and / or information and materials supplied by you and provide no warranty on the tested sample(s) be truly representative of the sample source. The report is not intended to be a recommendation for any particular course of action, you are responsible for acting as you see fit on the basis of the report results. Intertek is under no obligation to refer to or report upon any facts or circumstances which are outside the specific instructions received and accepts no responsibility to any parties whatsoever, following the issue of the report, for any matters arising outside the agreed scope of the works. This report does not discharge or release you from your legal obligations and duties to any other person. You are the only one authorized to permit copying or distribution of this report (and then only in its entirety). Any such third parties to whom this report may be circulated rely on the content of the report solely at their own risk.

Documents

TEST REPORT · 26.11.2018 · Sample Description: One (1) group of submitted samples said to be : Item name : Mushroom Garden Item no. : 2221,2222,2223,2224,2225,2226,2227,2228,2229