06_blaine_air_permeability_app 21.02.2013 15:51 Uhr Seite 1

Probedruck

C M Y CM MY CY CMY K

Blaine air permeability apparatusSix different versions from manual to PC controlled

EN 196-6, BS 4550, ASTM C204and Dyckerhoff systemwith large measuring cell

123456

TESTING Bluhm & Feuerherdt GmbHMotzener Strasse 26 b · 12277 Berlin · GermanyPhone +49 30 7109645-0 · Fax -98info@testing.de

06_blaine_air_permeability_app 21.02.2013 15:51 Uhr Seite 2

Probedruck

C M Y CM MY CY CMY K

PC controlled Blaine air permeability apparatus*complete, for determination of the specific surface (fineness)of cements, fully automatic test performance and analysis,with software, without PC,110-230 V, 50-60 HzEN 196-6, ASTM C204, etc.

PC controlled Blaine air permeability apparatus withofficial calibration*

Electronic Blaine air permeability apparatus,Dyckerhoff*systemfor determination of the specific surface (fineness) of cements.Semi-automatic with pump and time recording for fast analysisof operating parameters. Measuring cell Ø 41 mm, measuringcell volume approx. 73 cm3 110-230 V, 50-60 Hz

*Use of the machine requires a standard PC with screenor a laptop, not included in the scope of supply

Manual Blaine air permeability apparatuscomplete, for determination of the specific surface (fineness)of cements EN 196-6, ASTM C204, etc.

Manual Blaine air permeability apparatuswith official calibration

Electronic Blaine air permeability apparatuscomplete, for determination of the specific surface (fineness)of cements, semi-automatic with pump and time recording, 110-230 V, 50-60 HzEN 196-6, DIN 1164, BS 4550, ASTM C204

Electronic Blaine air permeability apparatuswith official calibration

1.0297E

1.0209

1.0210

1.0209E

1.0290

1.0290E

1.0297

2

06_blaine_air_permeability_app 21.02.2013 15:51 Uhr Seite 3

Probedruck

C M Y CM MY CY CMY K

Accessories for 1.0209 / 1.0290 / 1.0297

Reference sand 1 (coarse), special surface, approx. 2.830 cm2/g

Reference sand 2 (fine), special surface, approx. 4.000 cm2/g

Consumables

Fill oil

Glass U-tube

Filter paper Ø 12,8 mm (1 pack = 1000 ea.)

Light grease 50ml

Accessories for 1.0210 / 1.0294 / 1.0295

Reference sand 1 (coarse), special surfaceapprox.. 2.830 cm2/g, tested, approx. 600 g

Referenzsand (fein), spez. Oberflächeapprox.. 4000 cm2/g, tested, approx. 600 g

Consumables

Filter paper ø 41 mm, (1 pack = 500 ea.)

Fill oil 150 ml

Glass U-tube for Dyckerhoff system

Foam plugs (dust filter) pack = 10 ea.

Light grease 50ml

Dial gauge for determiningthe height of fill inthe measuring cel

PC controlled Blaine air permeability apparatus* complete Dyckerhoff system with 1 measuring cellfor determination of the specific surface (fineness) of cements.Fully-automatic test performance and analysis, complete withsoftware, without PC, measuring cell ø 41 mm, volume of themeasuring cell approx. 73 cm3 110-230 V, 50-60 Hz

PC controlled Blaine air permeability apparatus* complete Dyckerhoff systemfor determination of the specific surface (fineness) of cements.Same design as 1.0294 however, with 2 measuring pointsand 2 measuring cells

*Use of the machine requires a standard PC with screenor a laptop, not included in the scope of supply

Subj

ect t

o ch

ange

with

out n

otic

e · 0

4/12

1.0209.03

1.0294

1.0209.05

1.0295

1.0209.02

3

1.0209.06

1.0210.03

1.0210.05

1.0294.03

1.0291.01

1.0291.02

1.0210.06

1.0209.09

1.0209.10

1.0210.04

1.020.10

06_blaine_air_permeability_app 21.02.2013 15:51 Uhr Seite 4

Probedruck

C M Y CM MY CY CMY K

TESTING Bluhm & Feuerherdt GmbHMotzener Straße 26 b · 12277 BerlinTel +49 30 7109645-0 · Fax -98info@testing.de

Gerätefür MörtelBlaine-Geräte