8/12/2019 Tia Configuration

1/16

Configuring the TIA

Steps to configure TIA in brief are as follows:

1) Create a new project in TIA via start menu.2) Add the required CPU.3) Set the IP address of the plc.4) Create a sample project.5) Download

The detail description of all above steps is as follows:

8/12/2019 Tia Configuration

2/16

Step I:

Fig: 01 Opening TIA

From Start menu select TIA as shown in fig: 01 shown above.

8/12/2019 Tia Configuration

3/16

Step I:

Fig: 02 Create a new project in the portal view

In this you create a new project at the desired location shown in fig: 03 below.

8/12/2019 Tia Configuration

4/16

Step I :

Fig: 03 Project creation.

Select Create new project and then write the name of your project in project name field.

Also select the browse option in the same window to choose storage location for the new project which

your are creating. The steps are as shown in fig 03

8/12/2019 Tia Configuration

5/16

Step I (2):

Fig: 04 New project is created.

8/12/2019 Tia Configuration

6/16

Step II (1):

Fig: 05 Adding the required CPU.

In this you right click on the Add New Device and select the type of PLC you want.

Then click OK.

8/12/2019 Tia Configuration

7/16

Step II (2):

Fig: 05 (2) Adding the required CPU.

8/12/2019 Tia Configuration

8/16

Step III :

Fig: 06 (1) Assigning the IP address.

In the IP address field type the IP address you want to give to your PLC and click on add subnet

mask to create the connection.

8/12/2019 Tia Configuration

9/16

Step I V (1):

Fig: 07 Adding the DB block.

You click on the ADD NEW BLOCK under the program block and select the DB block. Take care to remove

the remove the symbolic access. Then click on OK. Your DB block is added.

8/12/2019 Tia Configuration

10/16

Step I V (2):

Fig: 08 Add the DB.

In this you create DB with specific address under the DB block also specify the data type.

8/12/2019 Tia Configuration

11/16

Step IV :

Fig: 09 Creation of PLC program in OB1.

In this a small move block is created and after that we save the project.

8/12/2019 Tia Configuration

12/16

8/12/2019 Tia Configuration

13/16

Step V (2):

Fig: 11 Compiling configuration

After you click download a compiling window opens. When the compiling is complete you click on load.

8/12/2019 Tia Configuration

14/16

Step V (3):

Fig: 12 Loading the program

You click on load

8/12/2019 Tia Configuration

15/16

Step I (2):

Fig: 13 Download complete.

Click on finish the program will be successfully downloaded in plc.

8/12/2019 Tia Configuration

16/16

Step I (2):

Fig: 14 Output of the project.

In this window you change the value in modify value column then click on monitor value.

This completes the configuration of TIA .