AEROLITE 1000

Material compositionMade from Chrysotile Asbestos fiber with synthetic Oil & Solvent resistant elastomers with a corrosion resistance metal gauge center. Close wire mesh insertion (20 wires in each centimeter).Applications:Suitable for high performance, Where high Mechanical and thermal stress is encountered. For Oil, transmissions and hydraulic fluid, low temp. Oil, steam Alkalis, anti freeze, refrigerating oil, for water, air, fuels, alcohol, IC engines.Standard Sheet Size

15002000 mm,15004000 mm,15001500 mm, 15004500 mm,15003000 mm, 20003000 mmTolerance

Thickness (1 mm = 0.10 mm Length 50 mm

>1mm = 0.10% width 50 mmMaterial dataGeneral information

Material typeCompressed Asbestos Fiber (CAF) Metallic Range

Temperature limit600 C

Internal Pressure limit200 bar

Thickness (mm)0.6 - 6

ColorGraphited/Graphited

Physical propertiesStandardUnitValue

Density (Nominal)IS:2712/1998[g/cm]1.7-2.2

Tensile StrengthIS:2712/1998Mpa>26.0

CompressibilityIS:2712/1998[%]6 14

RecoveryIS:2712/1998[%]>40

Ignition lossIS:2712/199823

Fluid absorptionIS:2712/1998

In ASTM oil no.3ASTM F 146

Increase in mass[%]