AEROLITE 1000
Material compositionMade from Chrysotile Asbestos fiber with
synthetic Oil & Solvent resistant elastomers with a corrosion
resistance metal gauge center. Close wire mesh insertion (20 wires
in each centimeter).Applications:Suitable for high performance,
Where high Mechanical and thermal stress is encountered. For Oil,
transmissions and hydraulic fluid, low temp. Oil, steam Alkalis,
anti freeze, refrigerating oil, for water, air, fuels, alcohol, IC
engines.Standard Sheet Size
15002000 mm,15004000 mm,15001500 mm, 15004500 mm,15003000 mm,
20003000 mmTolerance
Thickness (1 mm = 0.10 mm Length 50 mm
>1mm = 0.10% width 50 mmMaterial dataGeneral information
Material typeCompressed Asbestos Fiber (CAF) Metallic Range
Temperature limit600 C
Internal Pressure limit200 bar
Thickness (mm)0.6 - 6
ColorGraphited/Graphited
Physical propertiesStandardUnitValue
Density (Nominal)IS:2712/1998[g/cm]1.7-2.2
Tensile StrengthIS:2712/1998Mpa>26.0
CompressibilityIS:2712/1998[%]6 14
RecoveryIS:2712/1998[%]>40
Ignition lossIS:2712/199823
Fluid absorptionIS:2712/1998
In ASTM oil no.3ASTM F 146
Increase in mass[%]
