Aesculap Endoscopic TechnologyGN 300 Electrosurgical Unit
Bewährte OP-Techniken als Basis, verbundenmit neuen Forderungen aus den Bereichen Mikro-/Neuro- und minimal-invasiveChirurgie stellten die Grundlage für dieEntwicklung des Elektrochirurgie-GerätesGN 300 dar.
Das mikroprozessorgesteuerte Folientastatur-gerät GN 300 überzeugt durch leichteBedienbarkeit, ergonomische COAG-Steue-rung und bietet höchsten Sicherheits-standard.
Der Mikroprozessor mit der entsprechendenSoftware führt beim Einschalten eineautomatische Geräteprüfung durch undüberwacht während des Betriebs permanentalle sicherheitsrelevanten Signale, die Bedie-nung der Funktionstasten und das ange-schlossene Zubehör. Abweichungen werdendem Benutzer akustisch und optischangezeigt.
Durch feinstufige, applikationsorientierteEinstellmöglichkeiten und Koagulationsauto-matik in Verbindung mit impedanzgesteuer-tem oder geregeltem Leistungsverlauf, eignetsich das Gerät für alle mono- und bipolarenVerwendungen bei mikro- und makrochirur-gischen Einsätzen in der
● Allgemeinchirurgie● Gynäkologie● Urologie (inkl. TUR)● Orthopädie● HNO● Neurochirurgie● sowie Operationen am offenen Herzen
(Typ CF)
Die Einhaltung nationaler und internationalerVorschriften ist durch Prüfstellen bestätigt.
GN 300 Electrosurgical Unit
2
AESCULAP’s electrosurgical unit GN 300 is designed to incorporate the principles of proven operating techniques and new requirements in the areas of Microsurgery,Neurosurgery and Minimally Invasive Surgery.
The microprocessor controlled GN 300 is easy to operate, and provides the surgeon ergonomic COAG control with a very high level of safety.
In conjunction with the correspondingsoftware the microprocessor performs anautomatic unit test after switching on andcontinuously monitors all signals relevant toa safe operation of the function keys and theconnected accessories. Any irregularities areindicated to the user audibly and visually.
The multi-application adjustments, automa-tic coagulation and impedance-regulated power features make the GN 300 suitable forall monopolar and bipolar microsurgical andmacrosurgical procedures in the fields of:
● General surgery● Gynaecology● Urology (including TUR)● Orthopaedics● ENT● Neurosurgery● Open-heart procedures
Compliance with national and internationalregulations is confirmed by test institutes.
3
Memory
The individual indication-related empirical valuescan be stored in 3 permanent memory locationsand rapidly called up by pressing the relevant key.
PDM
A permanent dynamic monitoring function monitors whether the split patient electrode is correctly positioned on the body. Monitoring is performed continuously also during HF output. An audible and visual warning is immediately given in critical situations.
Speicher
Auf drei Speicherplätzen sind individuelle,indikationsbezogene Erfahrungswerte permanentspeicherbar bzw. mit einem Tastendruck schnell abrufbar.
PDM
Ein permanentes dynamisches Monitoringüberwacht, ob geteilte Neutralelektroden korrektam Patienten anliegen. Dies wird permanent, auchwährend der HF-Abgabe, durchgeführt. Bei kritischen Situationen wird sofort gewarnt.
GN 300 Electrosurgical Unit
4
Monopolar CUT
A powerful sinus-type HF current with alow crest factor permits reproducible andconsistent incision quality even with chan-ging tissue characteristics. PSF (PowerStart Function) ensures excision withoutdifficulties, especially in endoscopic proce-dures.There are four levels of preselectabledegrees of incision coagulation from whichto choose.
Monopolar COAG
The power characteristics of the micropro-cessor controlled COAG mode are suitablefor both large area and point coagulations,protecting tissue and allowing for consid-erable depth action without carbonizationand adhesion. The Vario pedal controlledautomatic coagulation feature providesadded operative versatility.
Spray COAG
Spray COAG permits completely non-con-tact surface coagulation - without contactbetween electrodes and tissue.
Monopolar CUT
Leistungsstarker, sinusförmiger HF-Strommit niedrigem Crestfaktor ermöglicht einereproduzierbare, gleichbleibende Schnitt-qualität bei wechselnden Gewebeeigen-schaften und durch PSF (Power StartFunktion) problemloses Ausschneiden,insbesondere bei endoskopischen Eingrif-fen. Der Koagulationsgrad des Schnitteskann in vier Stufen vorgewählt werden.
Monopolar COAG
Durch den mikroprozessorgesteuertenLeistungsverlauf eignet sich dieser Bereichsowohl für großflächige Koagulationen,wie auch für gewebeschonende Punkt-koagulationen mit großer Tiefenwirkung,ohne Karbonisation und Anhaften desGewebes. Bei Steuerung mit dem Vario-Pedal läßt sich mittels der Koagulations-automatik eine weitere Optimierung derKoagulationsergebnisse erreichen.
Spray COAG
Mit Spray COAG können Oberflächen-koagulationen völlig berührungsfrei, ohneElektrodenkontakt zum Gewebe, durchge-führt werden.
5
Bipolar CUT
In bipolar cutting, good cutting results canbe achieved in conjunction with BiTOMinstruments. Reduced wattage and atightly restricted current flow zone resultin practical advantages and increasepatient safety.
Bipolar COAG
The wide field of bipolar coagulation iscovered by an integrated MICRO/MACROmode in conjunction with optimaladaptation to the tissue impedance.It is possible to perform very fine coagula-tions without tissue sticking of the forcepstips as well as extensive coagulations withcorresponding instruments.The Vario pedal controlled automaticcoagulation feature provides addedoperative versatility.
Automatic coagulation
The output power of both monopolar andbipolar COAG modes is incrementallyadjustable to the preselected setting viathe Vario foot pedal control. The ergono-mically designed COAG control providesthe surgeon gentle coagulation withoutthe risk of necrosis. Even microcoagula-tions can be performed sensitively andsafely without changing the powersetting. In addition, the post-operativehealing phase is shortened and the life ofthe accessories increased.
Bipolar CUT
Beim bipolaren Schneiden lassen sich inVerbindung mit BiTOM Instrumenten guteSchnittergebnisse erzielen. Durch dengeringen Leistungsbedarf und den engumgrenzten Stromfluß ergeben sichanwendungstechnische Vorteile unddadurch erhöhte Sicherheit für denPatienten.
Bipolar COAG
Durch einen integrierten MICRO/MACRO-Bereich in Verbindung mit der optimalenAnpassung an die Gewebeimpedanz wirddas weite Feld der bipolaren Koagulationabgedeckt. Feinste Koagulationen lassensich ohne Verkleben der Pinzettenspitzenebenso durchführen wie auch großeKoagulationen mit entsprechendenInstrumenten. Bei Steuerung mit demVario-Pedal läßt sich mittels der Koagula-tionsautomatik eine weitere Optimierungder Koagulationsergebnisse erzielen.
Koagulationsautomatik
Die Ausgangsleistung ist in beiden COAG-Bereichen mittels des Vario-Pedals stufen-los bis zur vorgewählten Leistungseinstel-lung steuerbar. Durch diese ergonomischeCOAG-Steuerung wird das Gewebeschonend und nekrosefrei koaguliert. Diepostoperative Heilphase verkürzt sich unddie Lebensdauer des Zubehörs verlängertsich. Selbst Mikrokoagulationen könnensomit ohne Änderung der Geräteeinstel-lung gefühlvoll und sicher durchgeführtwerden.
Voltage range 100 - 120 V
220 - 240 V
Mains frequency 50 - 60 Hz
Output monopolar Power Adaptation(watts) (ohms)
CUT 1 (PURE) 300 W 250 - 600
CUT 2 (Modulated 1) 200 W 250 - 600
CUT 3 (Modulated 2) 150 W 250 - 600
CUT 4 (Modulated 3) 100 W 250 - 600
CONTACT COAG 120 W 250 - 600
SPRAY COAG 80 W 700 - 1200
Output bipolar Power Adaptation(watts) (ohms)
CUT 80 W 700 - 1300
COAG 80 W 70 - 250
Power consumption 550 W
Safety rating I
Type CF
LF leakage current in acc. with IEC 601-1
HF leakage current in acc. with IEC 601-2-2
Output frequency 447 kHz
Modulation frequency monopolar 20 kHz
bipolar 1kHz
Weight 9.3 kg
Dimensions (W x H x D) 305 x 155 x 305 mm
GN 300 Electrosurgical Unit
6
Technische Daten
Netzanschluß 100 - 120 V
220 - 240 V
Netzfrequenz 50 - 60 Hz
Ausgang monopolar Leistung Anpassung(Watt) (Ohm)
CUT 1 (PURE) 300 W 250 - 600
CUT 2 (Moduliert 1) 200 W 250 - 600
CUT 3 (Moduliert 2) 150 W 250 - 600
CUT 4 (Moduliert 3) 100 W 250 - 600
CONTACT COAG 120 W 250 - 600
SPRAY COAG 80 W 700 - 1200
Ausgang bipolar Leistung Anpassung(Watt) (Ohm)
CUT 80 W 700 - 1300
COAG 80 W 70 - 250
Leistungsaufnahme 550 W
Schutzklasse I
Typ CF
NF-Ableitstrom nach IEC 601-1
HF-Ableitstrom nach IEC 601-2-2
Ausgangsfrequenz 447 kHz
Modulationsfrequenz monopolar 20 kHz
bipolar 1kHz
Gewicht 9,3 kg
Abmessungen (B x H x T) 305 x 155 x 305 mm
Informationen über weiteresZubehör siehe Prospekt C-304.
Refer to brochure C-304 for further accessories.
Technical Data
7
GN073 Bipolar cable, 3.5 m Bipolar-Kabel, 3,5 m
GN300 Electrosurgical Unit mono- and bipolar, without mains cord and accessories
Elektrochirurgie-Gerät mono- und bipolar,ohne Netzkabel und Zubehör
GN325 Vario dual foot pedal,explosion-proof,cable 4 m
Vario-Doppelfußtaster,explosionsgeschützt,Kabel 4 m
GN209 Electrode handle withtwo finger push button
Elektrodenhandgriffmit Doppelfingertaster
GN207 Electrode handle without fingerpush buttons
Elektrodenhandgriffohne Fingertaster
GN203GN205
Cable for electrode handles3.5 m 5 m
Kabel für Elektrodenhandgriff3,5 m5 m
GK174R Surgical electrode set,complete, with 12 differentelectrodes Ø 4 mm, with container, rack and 12 electrodes
Chirurgie-Elektroden-Sortiment,komplett, mit 12 verschiedenenElektroden Ø 4 mm, mit Behälter,Ständer und 12 Elektroden
GK107R Universal plate, single use50 pieces in peel packs of 5 each, conductive area 110 cm2
Einmal-Universalelektrode50 Stück im Peel Pack zu 5 Stück, leitfähige Fläche 110 cm2
GN249GN245
Cable for single use patient electrode3.5 m 5 m
Kabel für Einmal-Neutralelektroden3,5 m5 m
Brochure No. C 306 11
All rights reserved. Technical alterations are possible. This leaflet may be used for no other purposes than offering, buying and selling of our products. No part may be copied or reproduced in any form. In the case of misuse we retain the rights to recall our catalogues and pricelists and to take legal actions.
Aesculap AG & Co. KG
Am Aesculap-Platz78532 TuttlingenGermany
Phone +49 7461 95-0Fax +49 7461 95-2600
www.aesculap.de
1206/1.0/10