Cable Management Systems
Perforated cable tray
Perforated tray Introduction
Commercial� Offices & retail centres
� Hotels & resorts
� Stadia & concert halls
Public sector� Schools & universities
� Hospitals & healthcare
� Government buildings
Industrial� Automotive plants
� Food processing
� Pharmaceutical & manufacturing
Oil & Gas� Petrochemical plants
� Oil & Gas refineries
� Offshore platforms
Infrastructure� Airports
� Rail terminals
� Tunnels
Utilities� Power stations
� Water treatment facilities
Thomas & Betts is a global leader in the design, developmentand supply of cable support and management solutions.
From Ty-Rap® cable ties to complete cable tray systems, Thomas& Betts products are renowned for delivering robust, reliable andhigh performance solutions to the electrical marketplace.
With a long history of excellence and innovation, Thomas & Betts productsoffer the complete solution to your electrical needs.
Thomas & Betts is now manufacturing cable tray systems, includingperforated tray, cable ladder, channel tray and strut (metal framing),directly from our new production facility at Dammam in Saudi Arabia.
Combining local manufacture and distribution with an extensive productrange, this facility ensures we can effectively support customer demandand respond rapidly to project timelines for all types of installation acrossthe Middle East.
So, whether specifying a major new project, or simply refurbishing existingfacilities, choose Thomas & Betts cable tray to deliver the most effective,reliable and long lasting support for your cabling needs.
Delivering worldclass solutions in
cable management.
Thomas & Betts perforated trayis ideal for a wide range of commercial,industrial & public sector projects:
3
Introduction
Increased adaptability
Businesses must remain flexible -to be able to expand facilitiesquickly, or introduce new processesor product lines as markets dictate.
T&B perforated tray offers a majoradvantage in being highly adaptableto meet new needs and technology,with no need to replace the systemwith each new development.
Modifications or expansions areachieved quickly as cables can enteror exit the tray at any point, thuskeeping business disruption anddowntime to a minimum.
Low maintenance
Cable tray wiring systems have alower maintenance demand thanconduit or other systems.
When maintenance is necessary, itproves easier, less labour intensive,and requires less time to complete.
First class support
Thomas & Betts combines globalmarket leadership with local product& technical support, either throughour network of distributors, or viaour T&B sales office in Dubai and ourproduction facility at Dammam.
Extensive product range
T&B perforated tray is available inaluminium or steel, from mediumduty to ultra heavy duty, to cover alltypes of installation.
Straight sections are complementedby an extensive selection of fittings,covers and accessories to permitspecification of full perforated traysystems from a single source.
Reduced costs
Reliability and adaptability coupledwith ease of maintenance result inperforated tray systems deliveringmany types of cost saving, including:
� Lower installation, engineeringand maintenance costs
� Lower need to reconfigure thesystem as needs change
� Reduced downtime for electricaland data handling systems
� Fewer environmental problemsresulting from loss of power toessential equipment
Contents
Introduction to perforated tray 4 - 5
Straight section 6
Fittings 7 - 11
Covers 12 - 14
Accessories 15 - 19
Superstrut® 20 - 21
Additional solutions 22 - 23
Imperial to metric 23conversion chart
Thomas & Betts perforated tray deliversthe comprehensive, flexible solutionfor supporting cable.
T&B perforated tray is a durableand cost effective solution forsupporting cable, which is easy toinstall, modify and maintain.
Suitable for a wide variety ofindustries and installations,T&B perforated tray offers thesure choice for high quality, highperformance cable management.
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Perforated tray
Enhanced safety
T&B perforated tray offers enhancedsafety with lower risk of exposure tolive, energised parts.
In a perforated tray system, cablescan be pulled from near onetermination enclosure to the nextbefore being connected, rather thanbeing pulled through conduit afterthe cable is terminated.
4
Perforated tray Introduction
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
T&B perforated tray has fourduty types with differing siderailheights - 25 mm (medium duty),50 mm (heavy duty), 75 mm(extra heavy duty) and 100 mm(ultra heavy duty).
This design permits specificationacross the widest possible rangeof projects with each duty typeincluding the standard T&Bperforation pattern.
50
75
Suitable for M10 bolt
Suitable for M6 bolt
5025
25 37.5
75
15
Thomas & Betts perforated trayis available in four materialtypes for maximum versatilityin installation.
Aluminium (to 1050 H14)
Aluminium 1050 H14 alloy for lightweight construction, excellent corrosionresistance, and high strength-to-weight ratio. Aluminium cable tray offerssimple installation and low maintenance.
Pre-galvanized steel (to BS EN 10142 & BS EN 10143)
Steel is ideal as a high strength, low cost material for cable tray.
Pre-galvanized steel tray is produced by passing the low-carbon steel throughmolten zinc before fabrication, and is generally recommended for indoorcommercial applications rather than outdoor or industrial environments.
Hot dip galvanized steel (to BS EN ISO 1461)
Hot dip galvanized steel tray is produced by immersing the fabricated trayin molten zinc, creating a much thicker coating than pre-galvanized. Thisprocess is recommended for most outdoor and harsh industrial applications.
Stainless steel (to AISI Type 316 or 304)
Stainless steel offers high strength and high resistance to chemicals, evenat high ambient temperatures. T&B stainless steel cable tray is roll-formedfrom AISI Type 316 or 304 stainless steel.
Material types
� Aluminium
� Steel (pre-galvanized, hot dipgalvanized and stainless steelgrades 304 and 316)
Note: cable tray edges and welds are rounded and smoothed during manufacture to prevent cable damage. Careshould be taken when handling cable tray and protective gloves should be worn to avoid risk of injury.
T&B perforation pattern
The pattern used on T&B perforated tray has been specifically designed tomeet Middle East market expectations and to ensure all component partscan be quickly and easily coupled together, keeping installation time toa minimum.
Included in the pattern are burr free slots and squares for securing barrierstrips, mounts and supports, and also for securing Ty-Rap® cable ties whenbundling cable.
5
Perforated trayIntroduction
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Straight section
Pre-fabricated steel or aluminiumstraight sections designed with aperforation pattern which permitsefficient connection of Ty-Rap®cable ties, supports and accessories.
Available in aluminium or steel in arange of finishes to cover all possibleinstallation needs.
Supplied complete with standardcoupler for connection to fittingsand other straight sections.
Fittings
Including bends, reducers, tees andcrosses, fittings enable a perforatedtray system to change direction,elevation or size to meet buildingdesign/cable run constraints.
Covers
Available for all cable tray widthsand material types, covers providemechanical protection and shouldbe installed where falling objectsmay damage cables or where verticaltray runs are accessible by pedestrianor vehicular traffic.
Styled as solid or ventilated forvarying installation needs, eachincluding an integral flange toenable quick and simple positioningabove tray lengths.
Accessories
A complete line of accessories andsupports to supplement the functionof straight sections and fittings,including couplers, cover brackets,barrier strips, end plates andSuperstrut® support solutions.
B
C
D
E
G
H
I
J
L
M
N
O
A
F
P
K
Q
Straight sections and fittings providethe flexibility to allow cable trayinstallations to follow cable runswhich are either planned for newprojects or already exist in buildings,as shown in the illustration right.
Extra heavy duty tray
Flat cover
Barrier strip
Horizontal cross
Horizontal 45°
Horizontal 90°
Horizontal tee
Straight reducer
Cranked coupler
Solid channel tray
Vertical 90º outside
Vertical 90º inside
Heavy duty tray
Medium duty tray
Vertical 45º outside
Vertical 45º inside
Reducer - right
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
T&B perforated tray deliversthe complete, versatile solutionfor cable management, withstraight sections, fittings, andcovers etc., developed toovercome the design constraintsfound in all kinds of buildingsand locations.
6
Perforated tray Straight section
* Medium duty perforated tray (25 mm siderail) is supplied with a material thickness of 1 mm for tray widths 50 mm to 225 mm, and 1.5 mm for tray widths 300 mm to 900 mm.Heavy to ultra heavy duty perforated tray (50 mm, 75 mm and 100 mm siderail) is supplied with a material thickness of 1.5 mm for tray widths 75 mm to 300 mm, and 2 mm for traywidths 450 mm to 900 mm.
ALP I Aluminium
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
SL I Straight section 1 I 1 mm
15 I 1.5 mm
20 I 2 mm
3 I 3 m
MaterialSiderailheight
Tray width TypeMaterialthickness*
Length
25 I 25 mm
50 I 50 mm
75 I 75 mm
100 I 100 mm
SHP75-450SL15-3
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Product selection - straight section
Straight section part numbers are created using a range of selection criteria. Determine the most suitable perforatedtray type based on the parameters shown, then use the table below to create the exact part number for your needs.
IMPORTANT NOTE: When specifiying perforated tray, note that the tray width must always be greater than thesiderail height. For example, medium duty tray with 25 mm siderail can have tray widths from 50 mm to 900 mm asper the table below, whereas for heavy duty tray with 50 mm siderail, tray width starts at 75 mm, and so on for extraheavy duty (75 mm siderail/minimum width 100 mm) and ultra heavy duty (100 mm siderail/minimum width 150 mm).
Straight sections are available in aluminium, or steel in a range of finishes,and are supplied complete with standard coupler and tray hardware.
� High quality manufacturing delivers enhanced system rigidity
� Choice of aluminium, pre-galvanized, hot dip galvanized, or stainless(304 or 316) steel
� Siderails include return flange for increased strength, safety, enhancedaesthetics and customer appeal
� Siderail heights from 25 mm to 100 mm for medium to ultra heavyduty applications
� Extensive range of tray widths, from 50 mm to 900 mm
� Standard coupler (2 per section) included with each section
Select the preferred component parts and createthe specific part number as per the example shown.
Features & benefits
Straight section
7
Perforated trayFittings
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
� All fittings follow a simple, functional design with connection pointsat all siderail ends for attachment to straight sections/couplers
� Easy to install with straightforward alignment between straightsections and fittings
� Available in all material types - aluminium, pre-galvanized, hot dipgalvanized and stainless (304 or 316) steel
� Siderail heights from 25 mm to 100 mm
� Extensive range of tray widths from 50 mm to 900 mm
� Lightweight design for easy handling on-site
Fittings enable a perforated tray system to change direction, elevation orsize in order to meet building design and cable run constraints.
Product selection - fittings
Fitting part numbers are based on a range of selection criteria, dependenton the type of fitting and the role undertaken in the cable tray system.
Over the following pages, the selection criteria for each fitting type isestablished in table form.
Specifiers should choose the appropriate component part from the lists in thetables and create the part number following the example shown.
Features & benefits
Range of fittings
A full suite of fittings ensures the cable tray system can be planned to fitbuilding and cable run constraints within all types of installation.
The full range includes:
� Horizontal bends - from 30º to 90º
� Vertical bends - inside and outside bends from 30º to 90º
� Horizontal tee
� Horizontal cross
� Straight, left or right reducer
All perforated tray components have been designed to allow a cable bendradius of 300 mm, to simplify planning, design and installation.
Perforated tray Horizontal bends
8
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
ALP I Aluminium
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
HB I Horizontal bend 30 I 30º
45 I 45º
60 I 60º
90 I 90º
Material Siderail height Tray width Fitting type Angle
25 I 25 mm
50 I 50 mm
75 I 75 mm
100 I 100 mm
ALP50-300HB45
Horizontal bends enable the cable tray system to change directionin the same plane.
Horizontal bends are available in all material types, siderail heights and traywidths to match straight sections.
� Available with angles of 30º, 45º, 60º or 90º
Select the preferred component parts and createthe specific part number as per the example shown.
Horizontal bend
90º 60º 45º 30º
Outside bend 90º 60º 45º 30º
9
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Vertical bends Perforated tray
Vertical bends enable the cable tray system to change direction to adifferent plane.
An inside vertical bend changes direction upward from the horizontalplane. An outside vertical bend changes direction downward from thehorizontal plane.
Vertical bends are available in all material types, siderail heights and traywidths to match straight sections.
� Available with angles of 30º, 45º, 60º or 90º
ALP I Aluminium
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
VI I Vertical inside bend
VO I Vertical outside bend
30 I 30º
45 I 45º
60 I 60º
90 I 90º
Material Siderail height Tray width Fitting type Angle
25 I 25 mm
50 I 50 mm
75 I 75 mm
100 I 100 mm
ALP50-300VI45Select the preferred component parts and createthe specific part number as per the example shown.
Vertical bend
Inside bend 90º 60º 45º 30º
10
Tees & crosses
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
ALP I Aluminium
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
HT I Horizontal tee
HX I Horizontal cross
Material Siderail height Tray width Fitting type
25 I 25 mm
50 I 50 mm
75 I 75 mm
100 I 100 mm
SS6P100-750HTSelect the preferred component parts and createthe specific part number as per the example shown.
Horizontal tees and crosses enable joins to be made in the cabletray system at 90º angles, in the same plane.
Available in all material types, siderail heights and tray widths to matchstraight sections.
Perforated tray
Horizontal tee & cross
Horizontal tee Horizontal cross
11
Perforated trayReducers
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
ALP I Aluminium
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
SR I Straight reducer
LR I Offset reducer -left
RR I Offset reducer -right
Material Siderail height Tray width 1
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
Tray width 2 Fitting type
25 I 25 mm
50 I 50 mm
75 I 75 mm
100 I 100 mm
ALP50-300-150SRSelect the preferred component parts and createthe specific part number as per the example shown.
Reducers enable joins to be made in the cable tray system tofittings or straight sections of different widths, in the same plane.
An offset reducer has the reduction set to a single side (right or left).A straight reducer has two symmetrical offset sides.
Available in all material types, siderail heights and tray widths to matchstraight sections.
� For reduction, tray width 2 should be less than tray width 1
Reducer
Reducer Right Straight Left
12
Covers
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Perforated tray
Note: cover mounting hardware must be ordered separately for allcover types.
Tray covers are available for all cable tray widths and materialtypes, in solid flanged or ventilated flanged format.
Covers provide mechanical protection to cable runs and should beinstalled where falling objects may damage cables or where verticaltray run is accessible by pedestrian or vehicular traffic.
Solid flanged covers provide maximum mechanical protection for cableswhich have limited heat build up. Ventilated flanged covers offer excellentmechanical protection whilst allowing heat produced by cables to dissipatethrough vents in the surface.
Both solid and ventilated covers include a 15 mm (nominal) flange whichenables easy location of the cover above the tray.
ALP I Aluminum
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
SFC I Solid flanged cover
VFC I Ventilated flanged cover
3 I 3 m
Material Tray width Cover type Length
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
SPP75-SFC-3
Product selection - covers
Cover part numbers are based on a range of selection criteria, dependent on the type of cover required, and the needto cover straight sections or fittings.
The tables shown below and over the following pages establish the selection criteria for each cover type. Specifiersshould choose the appropriate component part from the lists shown in the tables and create the part numberfollowing the example shown.
Select the preferred component parts and createthe specific part number as per the example shown.
Cover - straight section
13
Covers
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Perforated tray
ALP I Aluminium
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
SFC I Solid flangedcover
VFC I Ventilatedflanged cover
30 I 30º
45 I 45º
60 I 60º
90 I 90º
Material Tray width Cover type
HB I Horizontal bend
VI I Vertical inside bend
Fitting type Angle
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
SHP75-SFC-HB45Select the preferred component parts and createthe specific part number as per the example shown.
ALP I Aluminium
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
SFC I Solid flangedcover
VFC I Ventilatedflangedcover
30 I 30º
45 I 45º
60 I 60º
90 I 90º
MaterialSiderailheight
Cover type
VO I Verticaloutsidebend
Fitting type Angle
25 I 25 mm
50 I 50 mm
75 I 75 mm
100 I 100 mm
Tray width
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
ALP25-75-SFC-VO90Select the preferred component parts and createthe specific part number as per the example shown.
Cover - vertical outside bend
Cover - horizontal bend & vertical inside bend
14
CoversPerforated tray
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
ALP I Aluminium
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
SFC I Solid flangedcover
VFC I Ventilatedflanged cover
MaterialTray
width 1Cover type
SR I Straight reducer
LR I Offset reducer -left
RR I Offset reducer -right
Fitting type
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
Traywidth 2
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
SS6P75-50-SFC-SRSelect the preferred component parts and createthe specific part number as per the example shown.
ALP I Aluminium
SPP I Pre-galvanized steel
SHP I Hot dip galvanized steel
SS4P I Stainless steel 304
SS6P I Stainless steel 316
SFC I Solid flanged cover
VFC I Ventilated flanged cover
HT I Horizontal tee
HX I Horizontal cross
Material Tray width Cover type Fitting type
50 I 50 mm
75 I 75 mm
100 I 100 mm
150 I 150 mm
225 I 225 mm
300 I 300 mm
450 I 450 mm
600 I 600 mm
750 I 750 mm
900 I 900 mm
SS4P75-SFC-HTSelect the preferred component parts and createthe specific part number as per the example shown.
Cover - reducer
Cover - horizontal tee & cross
Note: for reduction, tray width 2 should be less than tray width 1.
15
Accessories Perforated tray
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
For connecting straight sections to fittings and other straight sections. Electro-galvanized hardwareincluded as standard.
ALP-(*)-SSP Aluminium
SPP-(*)-SSP Steel (pre-galvanized)
SHP-(*)-SSP Steel (hot dip galvanized)
SS4P-(*)-SSP Stainless steel 304
SS6P-(*)-SSP Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) toPart No. Example: ALP-25-SSP-S4 = 25 mm siderail coupler with stainless steel 304 hardware.
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) toPart No. Example: ALP-25-300-RSP-S4 = 25 mm siderail reducer coupler with stainless steel 304 hardware.
For connections between straight sections and fittings or other straight sections, with varyingtray widths. Electro-galvanized hardware included as standard.
Accessories and supportssupplement installationof straight sections, coversand fittings.
Accessories enable clamping ofcovers, separation of cables withintrays and variable mounting,support and suspension of theperforated tray system.
Quantity of standard cover brackets required:
Straight section 6 pieces
Horizontal and vertical bends 4 pieces
Tees 6 pieces
Crosses 8 pieces
Note: when using the heavy duty cover clamp, only half the quantity of pieces are required.
Reducer coupler
Straight coupler
ALP-(*)-(+)-RSP Aluminium
SPP-(*)-(+)-RSP Steel (pre-galvanized)
SHP-(*)-(+)-RSP Steel (hot dip galvanized)
SS4P-(*)-(+)-RSP Stainless steel 304
SS6P-(*)-(+)-RSP Stainless steel 316
Replace (*) with referencefor siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Replace (+) withreduction amount, eg:
25 = 25 mm
300 = 300 mm etc
Part No. Material Part No. variable (*) Part No. variable (+)
IMPORTANT NOTE: tray hardware, where included with accessories, is supplied in electro-galvanized format. Stainlesssteel hardware is available through addition of a suffix, as noted with each applicable accessory.
ALP-(*)-ESP Aluminium
SPP-(*)-ESP Steel (pre-galvanized)
SHP-(*)-ESP Steel (hot dip galvanized)
SS4P-(*)-ESP Stainless steel 304
SS6P-(*)-ESP Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
For connecting straight sections to fittings and other straight sections allowing for up to 25 mmexpansion of the perforated cable tray system.
Expansion coupler
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) to PartNo. Example: ALP-25-ESP-S4 = 25 mm siderail expansion coupler with stainless steel 304 hardware.
16
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
AccessoriesPerforated tray
For connections between straight sections and fittings or other straight sections with reduced traywidths, at a 45º angle. Electro-galvanized hardware included as standard.
ALP-(*)-VSP Aluminium
SPP-(*)-VSP Steel (pre-galvanized)
SHP-(*)-VSP Steel (hot dip galvanized)
SS4P-(*)-VSP Stainless steel 304
SS6P-(*)-VSP Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
For connecting straight sections to fittings and other straight sections at an angle in thevertical plane. Electro-galvanized hardware included as standard.
ALP-(*)-(+)-CRP Aluminium
SPP-(*)-(+)-CRP Steel (pre-galvanized)
SHP-(*)-(+)-CRP Steel (hot dip galvanized)
SS4P-(*)-(+)-CRP Stainless steel 304
SS6P-(*)-(+)-CRP Stainless steel 316
Replace (*) with referencefor siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Replace (+) withreduction amount, eg:
25 = 25 mm
300 = 300 mm etc
Part No. Material Part No. variable (*) Part No. variable (+)
45º Cranked reducer coupler
Vertical adjustable coupler
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) to PartNo. Example: ALP-25-300-CRP-S4 = 25 mm siderail cranked reducer coupler with stainless steel 304 hardware.
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) to PartNo. Example: ALP-25-VSP-S4 = 25 mm siderail vertical adjustable coupler with stainless steel 304 hardware.
ALP-(*)-HAP Aluminium
SPP-(*)-HAP Steel (pre-galvanized)
SHP-(*)-HAP Steel (hot dip galvanized)
SS4P-(*)-HAP Stainless steel 304
SS6P-(*)-HAP Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) to PartNo. Example: ALP-25-HAP-S4 = 25 mm siderail horizontal adjustable coupler with stainless steel 304 hardware.
For connecting straight sections to fittings and other straight sections at an angle in thehorizontal plane. Electro-galvanized hardware included as standard.
Horizontal adjustable coupler
For connections between straight sections and fittings or other straight sections, at 45º.Electro-galvanized hardware included as standard.
ALP-(*)-CCP Aluminium
SPP-(*)-CCP Steel (pre-galvanized)
SHP-(*)-CCP Steel (hot dip galvanized)
SS4P-(*)-CCP Stainless steel 304
SS6P-(*)-CCP Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) toPart No. Example: ALP-25-CCP-S4 = 25 mm siderail cranked coupler with stainless steel 304 hardware.
45º Cranked coupler
17
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Accessories Perforated tray
Wraparound design offers added protection for rugged applications. Electro-galv. hardware included.
ALP-(*)(+)-HCC Aluminium
SPP-(*)(+)-HCC Steel (pre-galvanized)
SHP-(*)(+)-HCC Steel (hot dip galvanized)
SS4P-(*)(+)-HCC Stainless steel 304
SS6P-(*)(+)-HCC Stainless steel 316
Replace (*) withreference forsiderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Replace (+) with referencefor tray width:
50 = 50 mm 75 = 75 mm
100 = 100 mm 150 = 150 mm
225 = 225 mm 300 = 300 mm
450 = 450 mm 600 = 600 mm
750 = 750 mm 900 = 900 mm
Part No. Material Part No. variable (*) Part No. variable (+)
For securing covers to straight sections and fittings, with flush fit. Order hardware separately.
ALP-(*)-SCC Aluminium
SPP-(*)-SCC Steel (pre-galvanized)
SHP-(*)-SCC Steel (hot dip galvanized)
SS4P-(*)-SCC Stainless steel 304
SS6P-(*)-SCC Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
For securing covers to straight sections and fittings, whilst allowing a nominal 25 mm gap foradditional ventilation. Order hardware separately.
ALP-(*)-RCC Aluminium
SPP-(*)-RCC Steel (pre-galvanized)
SHP-(*)-RCC Steel (hot dip galvanized)
SS4P-(*)-RCC Stainless steel 304
SS6P-(*)-RCC Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
Cover bracket
Raised cover bracket
Designed to secure perforated cable tray to support system. Electro-galvanized hardware includedas standard.
ALP-(*)-HDC Aluminium
SPP-(*)-HDC Steel (pre-galvanized)
SHP-(*)-HDC Steel (hot dip galvanized)
SS4P-(*)-HDC Stainless steel 304
SS6P-(*)-HDC Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
Hold down clamp
Heavy duty cover clamp
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) toPart No. Example: ALP-25300-HCC-S4 = cover clamp with stainless steel 304 hardware.
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) toPart No. Example: ALP-25-HDC-S4 = 25 mm siderail hold down clamp with stainless steel 304 hardware.
18
Perforated tray
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Accessories
For suspension of vertically hanging perforated tray. Requires threaded rod and hardware(order separately).
ALP-(*)-VTH Aluminium
SPP-(*)-VTH Steel (pre-galvanized)
SHP-(*)-VTH Steel (hot dip galvanized)
SS4P-(*)-VTH Stainless steel 304
SS6P-(*)-VTH Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
Vertical tray hanger
Designed to provide a smooth radiused surface at any position on the tray bottom. Drop-outs areeasily attached using electro-galvanized hardware provided. Nominal radius 100 mm.
ALP-(*)-DO Aluminium
SPP-(*)-DO Steel (pre-galvanized)
SHP-(*)-DO Steel (hot dip galvanized)
SS4P-(*)-DO Stainless steel 304
SS6P-(*)-DO Stainless steel 316
Replace (*) with reference for tray width:
50 = 50 mm 75 = 75 mm 100 = 100 mm
150 = 150 mm 225 = 225 mm 300 = 300 mm
450 = 450 mm 600 = 600 mm 750 = 750 mm
900 = 900 mm
Part No. Material Part No. variable (*)
Drop-out
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) toPart No. Example: ALP-600-DO-S4 = drop-out with stainless steel 304 hardware.
Provides closure to any tray end. Electro-galvanized hardware included.
Closure end plate
ALP-(*)(+)-CEP Aluminium
SPP-(*)(+)-CEP Steel (pre-galvanized)
SHP-(*)(+)-CEP Steel (hot dip galvanized)
SS4P-(*)(+)-CEP Stainless steel 304
SS6P-(*)(+)-CEP Stainless steel 316
Replace (*) withreference forsiderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Replace (+) with referencefor tray width:
50 = 50 mm 75 = 75 mm
100 = 100 mm 150 = 150 mm
225 = 225 mm 300 = 300 mm
450 = 450 mm 600 = 600 mm
750 = 750 mm 900 = 900 mm
Part No. Material Part No. variable (*) Part No. variable (+)
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) toPart No. Example: ALP-25150-CEP-S4 = closure end plate with stainless steel 304 hardware.
Barrier strips provide a method of separating cables in tray systems. Easily installed using suppliedelectro-galvanized hardware. Length 3 m.
ALP-(*)-SBH-3 Aluminium
SPP-(*)-SBH-3 Steel (pre-galvanized)
SHP-(*)-SBH-3 Steel (hot dip galvanized)
SS4P-(*)-SBH-3 Stainless steel 304
SS6P-(*)-SBH-3 Stainless steel 316
Replace (*) with reference for siderail height:
25 = 25 mm
50 = 50 mm
75 = 75 mm
100 = 100 mm
Part No. Material Part No. variable (*)
Barrier strip
Note: to order stainless steel hardware, add suffix -S4 (stainless steel 304), or -S6 (stainless steel 316) to PartNo. Example: ALP-25-SBH-3-S4 = 25 mm siderail barrier strip with stainless steel 304 hardware.
19
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Accessories Perforated tray
(*)-M616-RHB M6 x 16 round head bolt
(*)-M616-HN M6 hex. nut
WSP-10-SCR Self-drilling tapping screw Material : zinc plated steel
(*)-M6-FW M6 flat washer
(*)-M616-HWK Hardware kit inc. 8 nuts,8 bolts & 8 flat washers
Part No. Description Part No. variable (*)
WSP-(*)-TPK Steel (pre-galvanized)
WSH-(*)-TPK Steel (hot dip galvanized)
WSS-(*)-TPK Stainless steel 316*
Part No. Description Part No. variable (*)
Trapeze kits are designed to support various cable tray widths in a suspending installation.
Kit includes strut (cut to length) and all appropriate hardware including hex nuts, screws andwashers. Uses 1/2’’ threaded rod (order separately).
Replace (*) with reference for tray width:
50 = 50 mm 75 = 75 mm 100 = 100 mm
150 = 150 mm 225 = 225 mm 300 = 300 mm
450 = 450 mm 600 = 600 mm 750 = 750 mm
900 = 900 mm
* Stainless steel 304 available to special order.
Trapeze kit
Tray hardware
Replace (*) with reference for material:
SPP = Zinc plated steel
SS4P = Stainless steel 304
SS6P = Stainless steel 316
Replace (*) with referencefor material type:
EG = Electro-galvanized
HDG = Hot dip galvanized
SS4 = Stainless steel 304
SS6 = Stainless steel 316
H104-1/4x3(*) 1/4” 20 68 kg (150 lb)
H104-3/8x3(*) 3/8” 16 277 kg (610 lb)
H104-1/2x3(*) 1/2” 13 513 kg (1130 lb)
H104-5/8x3(*) 5/8” 11 822 kg (1810 lb)
H104-3/4x3(*) 3/4” 10 1231 kg (2710 lb)
H104-7/8x3(*) 7/8” 9 1713 kg (3770 lb)
H104-1x3(*) 1” 8 2254 kg (4960 lb)
Part No. Size Threads/inch Design load Part No. variable (*)
Replace (*) with reference for material type:
EG = Electro-galvanized
HDG = Hot dip galvanized
SS4 = Stainless steel 304
SS6 = Stainless steel 316
H119-1/4(*) 1/4” 7/8”
H119-5/16(*) 5/16” 7/8”
H119-3/8(*) 3/8” 1 1/8”
H119-1/2(*) 1/2” 1 1/4”
Part No. Rod size A Part No. variable (*)
H119-5/8(*) 5/8” 2 1/8”
H119-3/4(*) 3/4” 2 1/4”
H119-7/8(*) 7/8” 2 1/2”
H119-1(*) 1” 2 1/4”
A
Threaded rod
Threaded rod coupling
Standard length 3 m. Rod available in metric sizes to special order - contact Thomas & Betts.
Coupling available in metric sizes to special order - contact Thomas & Betts.
20
Superstrut®
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Metal framing channel
Hex head cap screw
Standard finish: electro-galvanized. Stainless steel channel nuts are recommended for aluminiumchannel - change suffix to SS4 or SS6 as required.
E142-(*)-(+) Hex head cap screw Replace (*) with referencefor size:
1/4x100 = 1/4” x 1”1/4x150 = 1/4” x 1 1/2”3/8x100 = 3/8” x 1”3/8x150 = 3/8” x 1 1/2”1/2x100 = 1/2” x 1”1/2x150 = 1/2” x 1 1/2”
Replace (+) with referencefor material/finish type:
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316
Part No. Description Part No. variable (*) Part No. variable (+)
Cap screw available in metric sizes to special order - contact Thomas & Betts.
Standard finish: electro-galvanized. Stainless steel channel nuts are recommended for aluminiumchannel - change suffix to SS4 or SS6 as required.
A100 is designed for A Series channel, and B100 is for B Series. A100 and B100 available in imperialsizes ranging from 1/4” to 7/8”, and metric sizes from M6 to M22. AB100 available in imperial sizesranging from 1/4” to 3/4”, and metric sizes from M6 to M20.
A100-(*)-(+) Spring nut
B100-(*)-(+) Spring nut
Replace (*) with referencefor thread size:
1/4 = 1/4”/M6 5/16 = 5/16”/M83/8 = 3/8”/M10 1/2 = 1/2”/M125/8 = 5/8”/M16 3/4 = 3/4”/M207/8 = 7/8”/M22
Replace (+) with ref. formaterial/finish type:
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316AB100-(*)-(+) Springless nut
Part No. Description Part No. variable (*) Part No. variable (+)
Nut is squareover 1/2” size
A100 B100
AB100
Channel nuts
Nut is squareover 1/2” size
A Series channel - 1 5/8” x 1 5/8” / 41 mm x 41 mm
Metal framing channel available in 2.5 mm (12 Gauge) and 2 mm (14 Gauge) thickness.Aluminium, hot dip galvanized or stainless steel channels are recommended to supportaluminium, steel or stainless steel cable tray. Offered in lengths of 10 ft, 20 ft, 3 m or 6 m.
A1200-(*)-(+)M A1400-(*)-(+)M Solid base Replace (*)with ref.for length:
10 = 10 ft20 = 20 ft3 = 3 m6 = 6 m
Replace (+) with ref. formaterial/finish type:
AL = AluminiumHDG = Hot dip galvanizedPG = Pre-galvanizedT304 = Stainless steel 304T316 = Stainless steel 316
A1200-P-(*)-(+)M A1400-P-(*)-(+)M Punched
A1200-S-(*)-(+)M A1400-S-(*)-(+)M Long slots
A1200-HS-(*)-(+)M A1400-HS-(*)-(+)M Half slots
A1202-(*)-(+)M A1402-(*)-(+)M Back to back
Part No. Part No. Part No. Part No.(12 Ga.) (14 Ga.) Description variable (*) variable (+)
B Series channel - 1 5/8” x 13/16” / 41 mm x 21 mm
B1200-(*)-(+)M B1400-(*)-(+)M Solid base Replace (*)with ref.for length:
10 = 10 ft20 = 20 ft3 = 3 m6 = 6 m
Replace (+) with ref. formaterial/finish type:
AL = AluminiumHDG = Hot dip galvanizedPG = Pre-galvanizedT304 = Stainless steel 304T316 = Stainless steel 316
B1200-P-(*)-(+)M B1400-P-(*)-(+)M Punched
B1200-S-(*)-(+)M B1400-S-(*)-(+)M Long slots
B1200-HS-(*)-(+)M B1400-HS-(*)-(+)M Half slots
B1202-(*)-(+)M B1402-(*)-(+)M Back to back
1-7/8"
2" 4"
Solid base Punched
Half slots Long slots
Back toback
A Series
1 5/8”41 mm
1 5/8”41 mm
21 mm
1 5/8”41 mm
13/16”
B Series
7/8”22 mm nominal
7/8”22 mm nominal
Superstrut® 2.5 mm (12 Ga.) & 2 mm (14 Ga.) channel - type A and type B
21
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Fittings and brackets Superstrut®
AB241-1/4(*) 1/4”
AB241-3/8(*) 3/8”
AB241-3/4(*) 3/4”
AB241-1/2(*) 1/2”
Part No. Hole size
45⁄8"3"
A
AB206(*) AB207(*) X207(*)
AB201(*) AB202(*) AB203(*)AB205(*)
AB213(*) AB214(*) AB254-R(*)
AB204(*)
AB254-L(*)
AP235H(*)
X289(*)
AP232(*)
S249-8(*) 8 1/2” 8” 681 kg (1500 lb)
S249-14(*) 14 1/2” 9” 681 kg (1500 lb)
S249-26(*) 26 1/2” 11 1/2” 681 kg (1500 lb)
S249-20(*) 20 1/2” 9” 681 kg (1500 lb)
S249-32(*) 32 1/2” 11 1/2” 681 kg (1500 lb)
S249-38(*) 38 1/2” 11 1/2” 681 kg (1500 lb)
Part No. A B Load
S250-6(*) 6” 681 kg (1500 lb)
S250-12(*) 12” 363 kg (800 lb)
S250-24(*) 24” 181 kg (400 lb)
S250-18(*) 18” 250 kg (550 lb)
Part No. A Load
S251-14(*) 14 1/2” 750 kg (1650 lb)
S251-20(*) 20 1/2” 363 kg (800 lb)
S251-32(*) 32 1/2” 227 kg (500 lb)
S251-26(*) 26 1/2” 295 kg (650 lb)
S251-38(*) 38 1/2” 227 kg (500 lb)
Part No. A Load
Fittings and brackets are available in four materials. To create specific part numbers,replace the part number variable (*) with the relevant material code shown right:
Note: Hot dip galvanized HDG or stainless steel fittings (SS6 or SS4) are recommended toassemble aluminum channel.
Note: may be installed inverted with no change in load ratings. Strut sectionmade from half slot channel.
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316
Standard dimensions: Hole spacing: 13/16” from end, 1 7/8” centres Hole size: 9/16” diameter, fitting width 1 5/8”
Superstrut® fittings and brackets
Superstrut® channel brackets are available in other lengths on request. Contact Thomas & Betts for further information.
22
Perforated tray
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Additional solutions
Available in aluminium, orsteel in a range of finishes,T&B cable ladder providesthe optimum solution forsupporting large quantitiesof heavy duty cable, across awide variety of commercialand industrial installations.
Thomas & Betts cable ladderis manufactured in threestyles - ladder, ventilated orsolid trough - for maximumversatility and robust, reliableperformance on-site.
T&B channel tray systemsprovide the ideal light dutysolution to cable support.
Suitable for supporting a widerange of telecoms, data, signal,computer and light powercables, channel tray is availablein solid or ventilated straightsections together with a fullsuite of fittings & accessories,to meet the demands of eventhe most complex installations.
Non-metallic cable tray istested and proven in theharsh environment of theoffshore oil & gas industry,where exposure to adverseand corrosive conditionsdemands a solution withunique material properties.
Non-metallic cable tray islightweight, neither rusts norrequires painting, and providesthe load capacity of steel.
The ExpressTrayTM cablemanagement system is acomplete solution formanaging light power, voice& data cables in commercialand industrial facilities, thatdelivers simplicity, efficiency,versatility and performance.
Requiring no corner, cross orbend elements, any layoutcan be achieved simply witha length of tray and a pair ofwire cutters.
E-Klips spring steel fastenersoffer a quick, easy and reliablemethod of fixing services tosteelwork without the needfor bracket making, drillingholes or use of nuts and bolts.
E-Klips fasteners are suitablefor almost every application,including cables, cable tray,ducting, pipework, trunking,light fittings, conduit andsuspended ceilings.
Custom-built cable supportfor petrochemical projecttanks or towers.
This cable tray system is usuallyinstalled around the outerperimeter of the catwalks andstairs which are mounted onthe tank or vessel.
Designed to special order tomeet specific project needs.
Cable ladder Channel tray
Non-metallic cable tray ExpressTrayTM wire frame cable tray
E-Klips spring steel fasteners Large radius cable tray
23
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Additional solutions Perforated tray
Thomas & Betts offers a broadrange of cable ties designedto make the task of fastening,bundling, clamping andmanaging wires easier for alltypes of commercial, industrialand OEM applications.
Strength and reliability arehallmarks of the Thomas &Betts cable tie range, whichare available in a variety ofstyles under the core brands:Ty-Rap®, Ty-Met®, Ty-Fast®,Ty-Grip® and Deltec® .
Thomas & Betts flexibleconduit provides excellentprotection for electrical cablesagainst aggressive/corrosiveenvironments, moisture andliquids, pressure loads, oil,dust, chemical pollutants andextreme temperatures.
Flexible conduit is availableunder the Thomas & Bettscore brands: Adaptaflex®,Kopex, Kopex-Ex, PMAFIX,PMAFLEX, Shureseal® andShureflex®.
Shrink-Kon® heavy, mediumand thin wall heat shrinkproducts protect cables andconnectors against moisture,corrosion and abrasion.
Additionally providingmechanical and electricalinsulation, Shrink-Kon®products range from highlyflexible to semi-rigid for amultitude of applications inindustry and OEM.
Sta-Kon®, Shield-Kon®,Color-Keyed® and DragonTooth® connectors offersecure, reliable, and highlyconductive termination ofshielded cables, power cablesand magnet wire.
All T&B connectors arecomplemented by manualand hydraulic crimping toolsto enable fast, high qualitycrimps with the minimumof effort.
Cable ties and fasteners
Flexible conduit systems Heat shrink technologies
Terminals and connectors
1/4” 6.35 mm
5/16” 7.94 mm
3/8” 9.53 mm
1/2” 12.7 mm
5/8” 15.9 mm
3/4” 19.05 mm
13/16” 20.64 mm
7/8” 22.23 mm
1” 25.4 mm
1 1/8” 28.58 mm
1 1/4” 31.75 mm
1 7/16” 36.51 mm
1 1/2” 38.1 mm
1 5/8” 41.28 mm
1 11/16” 42.86 mm
1 7/8” 47.63 mm
2” 50.8 mm
2 1/8” 53.98 mm
2 1/4” 57.15 mm
2 1/2” 63.5 mm
3 1/4” 82.55 mm
3 1/2” 88.9 mm
4 1/8” 104.78 mm
5 3/8” 136.53 mm
6” 152.4 mm
7 1/4” 184.15 mm
8” 203.8 mm
8 1/2” 215.9 mm
9” 228.6 mm
11 1/2” 292.1 mm
12” 304.8 mm
14 1/2” 368.3 mm
18” 457.2 mm
20 1/2” 520.7 mm
24” 609.6 mm
26 1/2” 673.1 mm
32 1/2” 825.5 mm
38 1/2” 977.9 mm
Imperial to metric conversion chart
inches mm inches mm inches mm inches mm inches mm
Perforated cable tray accessory and Superstrut® measurements in this publication where necessary are shown as imperial sizes. Please use the followingchart for conversions of imperial measurements to metric as required when assessing cable tray projects.
K.S.A. PROJECT OFFICE
Thomas & Betts Saudi Arabia
Building 128
Dammam Industrial Area #2
PO Box 514
Al Khobar 31952
Saudi Arabia
Tel +966 (0)3 812 1222
Fax +966 (0)3 812 2981
MIDDLE EAST SALES OFFICE
Thomas & Betts Ltd. Br.
Office 724 6WA West Wing
Dubai Airport Free Zone
PO Box 54567
Dubai
United Arab Emirates
Tel +971 (0)4 609 1635
Fax +971 (0)4 609 1636
www.tnb-europe.com
EUROPEAN HEADQUARTERS
Thomas & Betts
European Centre SA
200 Chaussée de Waterloo
B-1640 Rhode-St-Genèse
Belgium
Tel +32 (0)2 359 8200
Fax +32 (0)2 359 8201
UK OFFICE
Thomas & Betts Limited
Wilford Road
Nottingham
NG2 1EB
United Kingdom
Tel +44 (0)115 964 3700
Fax +44 (0)115 986 0538
The content of this Thomas & Betts catalogue has been carefully checked for accuracy at the time of print. However, Thomas & Bettsdoesn’t give any warranty of any kind, express or implied, in this respect and shall not be liable for any loss or damage that may resultfrom any use or as a consequence of any inaccuracies in or any omissions from the information which it may contain. E&OE.
Copyright Thomas & Betts Corp. 2011. Copyright in these pages is owned by Thomas & Betts except where otherwise indicated. No partof this publication may be reproduced, copied or transmitted in any form or by any means, without our prior written permission. Images,trade marks, brands, designs and technology are also protected by other intellectual property rights and may not be reproduced orappropriated in any manner without written permission of their respective owners. Thomas & Betts reserves the right to change andimprove any product specifications or other mentions in the catalogue at its own discretion and at any time. These conditions of use aregoverned by the laws of the Netherlands and the courts of Amsterdam shall have exclusive jurisdiction in any dispute.
TB-AS-PT-1011
Cable Management Systems
Channel tray
Channel tray Introduction
Commercial� Offices & retail environments
� Telecommunications centres
� Datacentres and IT facilities
Public sector� Schools & universities
� Hospitals & healthcare
� Government buildings
Industrial� Automotive plants
� Food processing
� Pharmaceutical & manufacturing
Oil & Gas� Petrochemical plants
� Oil & Gas refineries
� Offshore platforms
Infrastructure� Airports
� Rail terminals
� Tunnels
Utilities� Power stations
� Water treatment facilities
Thomas & Betts is a global leader in the design, developmentand supply of cable support and management solutions.
From Ty-Rap® cable ties to complete cable tray systems, Thomas& Betts products are renowned for delivering robust, reliable andhigh performance solutions to the electrical marketplace.
With a long history of excellence and innovation, Thomas & Betts productsoffer the complete solution to your electrical needs.
Thomas & Betts is now manufacturing cable tray systems, including channeltray, perforated tray, cable ladder and strut (metal framing), directly fromour new production facility at Dammam in Saudi Arabia.
Combining local manufacture and distribution with an extensive productrange, this facility ensures we can effectively support customer demandand respond rapidly to project timelines for all types of installation acrossthe Middle East.
So, whether specifying a major new project, or simply refurbishing existingfacilities, choose Thomas & Betts cable tray to deliver the most effective,reliable and long lasting support for your cabling needs.
Delivering worldclass solutions in
cable management.
Thomas & Betts channel tray issuitable for a wide range of commercial,industrial & public sector projects:
3
Channel trayIntroduction
Increased adaptability
A major advantage of channel trayis its adaptability. Modification ofthe system is easy because cables canenter or exit a tray at any point.
Channel tray is often used to providesupport to smaller cable runs from alarger cable ladder or perforatedcable tray system.
Channel tray can be easily affixedto larger systems, and is revised orexpanded simply without disruptionor the need to replace the entirecable management system.
Enhanced safety
Channel tray proves much safer thanconduit installation, with lower riskof exposure to live, energised parts.
In a channel tray system, cables canbe pulled from near one terminationenclosure to the next before beingconnected, rather than being pulledthrough the conduit after the cableis terminated.
Low maintenance
The simplicity of the channel traysystem ensures installation andmaintenance routines can beconducted quickly and effortlessly.
When maintenance is necessary, itrequires less labour and time thanalternative cabling solutions.
First class support
Thomas & Betts combines globalmarket leadership with local product& technical support, either throughour network of distributors, or viaour T&B sales office in Dubai and ourproduction facility at Dammam.
Extensive product range
T&B channel tray offers a completesystem including straight sections,fittings, covers and accessories foroptimum versatility when planningcable runs.
Components are available in a rangeof materials to cover the variety ofinstallation requirements across theMiddle East.
Reduced costs
Reliability, adaptability and ease ofmaintenance are some of the manybenefits of channel tray whichdeliver savings during installationand over the lifetime of the system.
Straightforward installation ensurescosts are reduced considerablycompared to the time needed topull cables through conduit.
High adaptability permits rapidsystem adjustment, ensuringdowntime is kept to a minimum inelectrical and data handling systems.
Contents
Introduction to channel tray 4
Straight section 5
Fittings 6 - 7
Covers 8 - 9
Accessories 10 - 12
Superstrut® 13 - 14
Additional solutions 15
Imperial to metric 15conversion chart
Thomas & Betts channel tray provides theideal support system for lighter dutycopper and fibre optic cable usedin data, signal, telecoms andcomputer applications.
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
With many installations now relianton electronic communications,T&B channel tray offers the easy toinstall, highly flexible yet robustsolution for supporting smaller,lightweight cable runs.
4
Channel tray Introduction
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Channel tray bottom types
Solid channel tray is offered in all widths (1 1/2”, 3”, 4”, 6”), and includesconnector holes at each end for attachment of fittings or other straightsections via a splice plate.
3”, 4” and 6” ventilated channel tray includes burr free oblong punchedholes for easy access. Ty-Rap® slots are provided between each openingfor securing and maintaining air space between cables. Ty-Rap® slots areprovided at intervals in 1 1/2” ventilated tray.
Note: fittings supplied in solid bottom type only.
Thomas & Betts channel tray isavailable in four material typesand two tray bottom types, formaximum versatility.
Aluminium (to 6063 T6)
Aluminium 6063 T6 alloy for lightweight construction, excellent corrosionresistance, and high strength-to-weight ratio. Aluminium channel tray offerssimple installation and low maintenance.
Pre-galvanized steel (to BS EN 10142 & BS EN 10143)
Steel is ideal as a high strength, low cost material for channel tray.
Pre-galvanized steel tray is produced by passing the low-carbon steel throughmolten zinc before fabrication, and is generally recommended for indoorcommercial applications rather than outdoor or industrial environments.
Hot dip galvanized steel (to BS EN ISO 1461)
Hot dip galvanized steel tray is produced by immersing the fabricated tray inmolten zinc, creating a much thicker coating than pre-galvanized. Thisprocess is recommended for most outdoor and harsh industrial applications.
Stainless steel (to AISI Type 316 or 304)
Stainless steel offers high strength and high resistance to chemicals, evenat high ambient temperatures. T&B stainless steel channel tray is roll-formedfrom AISI Type 316 stainless steel, as standard, with Type 304 stainless steelavailable to special order.
Material types
� Aluminium
� Steel (pre-galvanized, hot dipgalvanized & stainless steel)
Tray bottom types
� Solid
� Ventilated
2.175”
0.188” x 0.152” slots
4” 4”
2.175”Connectorholes
Traywidth
Punched hole dimensions (ventilated tray widths 3” to 6”)
Note: channel tray edges and welds are rounded and smoothed during manufacture to prevent cable damage. Careshould be taken when handling channel tray and protective gloves should be worn to avoid risk of injury.
Ventilated tray3”, 4” & 6”
Ventilated tray 1 1/2”
Solid tray
Channel Channel SOLID CHANNEL TRAY VENTILATED CHANNEL TRAYwidth depth Support span (feet) Support span (feet)(W) (D) 2 4 6 8 10 2 4 6 8 10
5
Straight section
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
MALT I Aluminium
MSPT I Pre-galvanized steel
MSHT I Hot dip galvanizedsteel
MSST I Stainless steel 316*
01 I 1 1/2”
03 I 3”
04 I 4”
06 I 6”
V I Ventilated
S I Solid trough
144 I 12 ft
288 I 24 ft
3 I 3 m/10 ft
Material TypeTraywidth
Bottom type Length
C I Straight section
MSPT-C-04-S-144
Product selection - straight section
Part numbers are created using a range of selection criteria (shown below). Determine the most suitable channel traytype for your needs, then use the table to create the exact part number.
Straight sections are available in aluminium, or steel in a range of finishes,with solid or ventilated bottom type.
� Extruded 6063 T6 Aluminiumalloy construction
� Nominal channel width from1 1/2” to 6”
� Ventilated bottom typeincludes pre-punched burrfree holes with Ty-Rap® slotsbetween each opening
� One splice plate and hardwaresupplied with each section
� Roll formed pre-galvanized,hot dip galvanized or stainlesssteel 316 (stainless steel 304available to special order)
� Nominal channel width from1 1/2” to 6”
� Ventilated bottom typeincludes pre-punched burrfree holes with Ty-Rap® slotsbetween each opening
� One splice plate and hardwaresupplied with each section
1 1/2” 3/4” 47.5 11.9 5.4 3.0 1.9 47.5 11.9 5.4 3.0 1.9
3” 1 3/8” 362.5 90.6 40.3 22.7 17.0 300.0 75.0 33.3 18.8 14.0
4” 1 5/8” 580.0 145.0 64.4 36.3 24.0 525.0 131.3 58.3 32.8 19.0
6” 1 3/4” 607.5 151.9 67.5 38.0 25.0 580.0 145.0 64.4 36.3 21.0
1 1/2” 3/4” 97.5 24.4 10.8 6.1 3.9 97.5 24.4 10.8 6.1 3.9
Steel channel tray - MSPT-C, MSHT-C, MSST-C
3” 1 3/8” 252.0 63.0 28.0 15.8 17.0 207.0 51.8 23.0 12.9 14.0
4” 1 5/8” 408.0 102.0 45.3 25.5 24.0 363.0 90.8 40.3 22.7 19.0
6” 1 3/4” 432.0 108.0 48.0 27.0 25.0 405.0 101.3 45.0 25.3 21.0
Aluminium channel tray - MALT-C
W
Aluminium
D
Steel
DW
Channel tray
* Stainless steel 304 available tospecial order
Straight section
Channel tray load rating (lb/ft)
Aluminium Steel
Select the preferred component parts and createthe specific part number as per the example shown.
Horizontal tee & cross Tee Cross
Vertical outside bend 90º 60º 45º 30º
Vertical inside bend 90º 60º 45º 30º
Horizontal bend 90º 60º 45º 30º
6
Channel tray Fittings
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Fittings enable a channel tray system to change direction orelevation in order to meet building design and cable run constraints.
The channel tray range of fittings includes:
� Horizontal bends � Vertical inside bends
� Vertical outside bends � Horizontal tees
� Horizontal crosses
The most important decision to be made in fitting design concerns radius.
Selection of the most appropriate radius requires a compromise with theconsiderations being available space, minimum bending radius of cables,ease of cable pulling, and cost.
Whether horizontal or vertical application, a standard radius of either12” or 24” is available, with options for zero (non-radius), or custom sizesgreater than 24” to special order.
The typical radius specified in channel tray installations is 24”.
Vertical outside bends enablethe channel tray system tochange direction, downwardsto a different plane.
Horizontal tees and crossesenable joins to be made in thechannel tray system at 90ºangles, in the same plane.
Horizontal bends enablethe channel tray systemto change direction in thesame plane.
Vertical inside bends enablethe channel tray system tochange direction, upwardsto a different plane.
7
Channel trayFittings
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Product selection - fittings
Fitting part numbers are based on a range of selection criteria, dependenton the type of fitting and the role undertaken in the channel tray system.
For product ordering, specifiers should choose the appropriate componentpart from the lists shown in the tables below and create a specific partnumber following the example shown.
Horizontal and vertical bends are available with standard angles of 30°,45°, 60° and 90°. When a standard angle is not suitable, field fittings oradjustable splice plates can be used. It may be necessary to add supportsto the tray at these points (our range of accessories and Superstrut® isshown on pages 10 to 14).
Refer to NEMA VE-2 Installation Guidelines for suggested support locationsfor fittings.
MALT I Aluminium
MSPT I Pre-galvanized steel
MSHT I Hot dip galvanizedsteel
MSST I Stainless steel 316*
S I Solid trough HB I Horizontalbend
VI I Verticalinside bend
VO I Verticaloutside bend
30 I 30º
45 I 45º
60 I 60º
90 I 90º
MaterialTraywidth
Bottom type Fitting type Angle
12 I 12”
24 I 24”
0 I Zeroradius**
Nominalradius
01 I 1 1/2”
03 I 3”
04 I 4”
06 I 6”
MALT-F-04-S-HB-90-24
Type
F I Fitting
Select the preferred component parts and createthe specific part number as per the example shown.
MALT I Aluminium
MSPT I Pre-galvanized steel
MSHT I Hot dip galvanizedsteel
MSST I Stainless steel 316*
S I Solid trough HT I Horizontal tee
HX I Horizontal cross
MaterialTraywidth
Bottom type Fitting type
12 I 12”
24 I 24”
0 I Zeroradius**
Nominalradius
01 I 1 1/2”
03 I 3”
04 I 4”
06 I 6”
MALT-F-04-S-HT-12
Type
F I Fitting
Select the preferred component parts and createthe specific part number as per the example shown.
* Stainless steel 304 available to special order.** Contact your local sales office for availability of zero radius fittings.
* Stainless steel 304 available to special order.** Contact your local sales office for availability of zero radius fittings.
Horizontal & vertical bend
Horizontal tee & horizontal cross
Channel tray Covers
8
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Solid flanged cover
Solid covers provide maximum mechanical protection for cables which havelimited heat build up, and include a 1/2” flange for secure positioning abovethe channel tray.
Solid cover for fittings
Covers for fittings (bends, tees and crosses) are available in solid cover typeonly and include a 1/2” flange for secure positioning above the channel tray.
Note: cover mounting hardware must be ordered separately for allcover types.
Tray covers are available for all channel tray widths and materialtypes, in solid style for both straight sections and fittings.
Covers provide mechanical protection to cable runs and should beinstalled where falling objects may damage cables, or where verticaltray run is accessible by pedestrian or vehicular traffic.
Product selection - covers
Cover part numbers are based on a range of selection criteria, dependent on the type of cover required, and the needto cover straight sections or fittings.
On the following page, the selection criteria for each cover type is established in table form.
Specifiers should choose the appropriate component part from the lists shown in the tables and create the partnumber following the example shown.
9
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Covers Channel tray
MALT I Aluminium
MSPT I Pre-galvanized steel
MSHT I Hot dip galvanizedsteel
MSST I Stainless steel 316*
01 I 1 1/2”
03 I 3”
04 I 4”
06 I 6”
SFC I Solid flanged cover 72 I 72”
144 I 12 ft
3 I 3 m/10 ft
Material TypeTraywidth
Cover type Length
F I Fitting (straight cover)
MSHT-F-04-SFC-144Select the preferred component parts and createthe specific part number as per the example shown.
MALT I Aluminium
MSPT I Pre-galvanized steel
MSHT I Hot dip galvanizedsteel
MSST I Stainless steel 316*
01 I 1 1/2”
03 I 3”
04 I 4”
06 I 6”
HBC I Horizontal bend
VIC I Vertical inside bend
VOC I Vertical outside bend
30 I 30º
45 I 45º
60 I 60º
90 I 90º
Material TypeTraywidth
Fitting type Angle
12 I 12”
24 I 24”
0 I Zeroradius**
Nominalradius
F I Fitting
MSPT-F-04-HBC-60-12Select the preferred component parts and createthe specific part number as per the example shown.
MALT I Aluminium
MSPT I Pre-galvanized steel
MSHT I Hot dip galvanized steel
MSST I Stainless steel 316*
01 I 1 1/2”
03 I 3”
04 I 4”
06 I 6”
HTC I Horizontal tee
HXC I Horizontal cross
Material TypeTraywidth
Fitting type
12 I 12”
24 I 24”
0 I Zeroradius**
Nominalradius
F I Fitting
MSPT-F-04-HXC-24Select the preferred component parts and createthe specific part number as per the example shown.
* Stainless steel 304 available to special order.
* Stainless steel 304 available to special order.** Contact your local sales office for availability of zero radius covers for fittings.
* Stainless steel 304 available to special order.** Contact your local sales office for availability of zero radius covers for fittings.
Cover - straight section
Cover - horizontal bend, vertical inside bend & vertical outside bend
Cover - horizontal tee & cross
Horizontal adjustable splice plate Vertical adjustable splice plate
Expansion splice plate Wrap around splice plate
Standard 1 1/2” splice plate Standard splice plate
10
Channel tray Accessories
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
WALT-(*)-ACS Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-ACS Steel (pre-galvanized)
WSST-(*)-ACS Stainless steel
WSHT-(*)-ACS Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-CHA Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-CHA Steel (pre-galvanized)
WSST-(*)-CHA Stainless steel
WSHT-(*)-CHA Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-ESP Aluminium Replace (*) with doubledigit reference for traywidth:
03 = 3” 04 = 4”06 = 6”
WSPT-(*)-ESP Steel (pre-galvanized)
WSST-(*)-ESP Stainless steel
WSHT-(*)-ESP Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-CCS Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2”
WSPT-(*)-CCS Steel (pre-galvanized)
WSST-(*)-CCS Stainless steel
WSHT-(*)-CCS Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-CCS Aluminium Replace (*) with doubledigit reference for traywidth:
03 = 3” 04 = 4”06 = 6”
WSPT-(*)-CCS Steel (pre-galvanized)
WSST-(*)-CCS Stainless steel
WSHT-(*)-CCS Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-CCV Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-CCV Steel (pre-galvanized)
WSST-(*)-CCV Stainless steel
WSHT-(*)-CCV Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
Connects 1 1/2” straight sectionsto fittings and other straightsections. Supplied with zincplated hardware.
Connects 3” to 6” straightsections to fittings and otherstraight sections. Supplied withzinc plated hardware.
Allows expansion & contractionof channel tray systems withwidths 3” to 6”. Supplied withzinc plated hardware.
Provides all round supportfor connections betweenstraight sections and fittings/other straight sections. Orderhardware separately.
Hinged horizontal plate allowsmaximum flexibility for changesin direction of the tray system.Order hardware separately.
Hinged vertical plate allowsmaximum flexibility for changesin elevation of the tray system.Order hardware separately.
Quantity of standard clamps required tosecure tray covers:
Straight section 72” 4 pieces
10 or 12 ft 6 pieces
Horizontal and vertical bends 4 pieces
Tees 6 pieces
Crosses 8 piecesNote: when using the heavy duty cover clamp, only half the quantity of piecesare required.
Accessories and supports supplement installationof straight sections, covers and fittings.
Accessories enable clamping of covers, variablemounting, support and suspension of the channeltray system.
Available materials are described in the tables. Unlessotherwise stated, ‘stainless steel’ refers to grade 316.
Stainless steel 304 is available to special order - contactyour local sales office for details.
Wraparound vertical adjustable splice plate Standard hold down clamp
Channel expansion guide clamp Combination hold down/cover clamp
Heavy duty cover clamp Closed end plate
Channel mounting bracket Channel to cable tray plate
11
Channel trayAccessories
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
WALT-(*)-WAV Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-WAV Steel (pre-galvanized)
WSST-(*)-WAV Stainless steel
WSHT-(*)-WAV Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-SHC Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-SHC Steel (pre-galvanized)
WSST-(*)-SHC Stainless steel
WSHT-(*)-SHC Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-CEG Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-CEG Steel (pre-galvanized)
WSST-(*)-CEG Stainless steel
WSHT-(*)-CEG Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-CCC Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-CCC Steel (pre-galvanized)
WSST-(*)-CCC Stainless steel
WSHT-(*)-CCC Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-HCC Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-HCC Steel (pre-galvanized)
WSST-(*)-HCC Stainless steel
WSHT-(*)-HCC Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-CEP Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-CEP Steel (pre-galvanized)
WSST-(*)-CEP Stainless steel
WSHT-(*)-CEP Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-CCB Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-CCB Steel (pre-galvanized)
WSST-(*)-CCB Stainless steel
WSHT-(*)-CCB Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-CCT Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-CCT Steel (pre-galvanized)
WSHT-(*)-CCT Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WSST-(*)-CCT Stainless steel
Splice plate with hinges andsiderails for maximum flexibilityin tray elevation plus additionalsupport to tray sides. Orderhardware separately.
For securing the tray systemto the support system. Orderhardware separately.
For securing the tray systemto the support system, allowingfor expansion. Order hardwareseparately.
For securing a covered traysystem to the support system.Order hardware separately.
Wraparound design offersadded protection for ruggedapplications. Hardware included.
Provides closure to any tray end.Order hardware separately.
For mounting the tray systemto a datacentre or distributionbox. Order hardware separately.
For mounting channel trayto a cable tray system. Orderhardware separately.
Tray hardware
Threaded rod & coupling
Channel to floor base plate Channel to tray mounting bracket
Channel hanger Channel straight reducer plate
12
Accessories
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Channel tray
WALT-(*)-(+)-RSP Aluminium Replace (*) withdouble digit ref.for tray width 1:
03 = 3” 04 = 4”06 = 6”
Replace (+) withdouble digit ref.for tray width 2:
01 = 1 1/2”03 = 3” 04 = 4”
WSPT-(*)-(+)-RSP Steel (pre-galv.)
WSST-(*)-(+)-RSP Stainless steel
WSHT-(*)-(+)-RSP Steel (hot dip galv.)
Material/ Part No. Part No.Part No. Tray type variable (*) variable (+)
WSP-1/4-CB Zinc plated steel Square shoulder self-positioning 1/4” carriage bolt
WSP-3/8-CB Zinc plated steel Square shoulder self-positioning 3/8” carriage bolt
WSP-3/8-HN Zinc plated steel 3/8” Hex. nut
WSP-1/4-HN Zinc plated steel 1/4” Hex. nut
WSS-3/8-CB Stainless steel (316) 3/8” Carriage bolt
WSS-3/8-HN Stainless steel (316) 3/8” Hex. nut
WSP-10-SCR Zinc plated steel Self-drilling tapping screw
WSS-3/8-HWK Stainless steel (316) Hardware kit inc. 8 nuts, 8 bolts, 8 lockwashers
Part No. Material DescriptionCarriage bolt
Self-drillingtapping screw
WALT-F-06-(*) Aluminium Replace (*) with referencefor channel hanger type:
CCH = Single channelhanger
DCH = Double channelhanger
WSPT-F-06-(*) Steel (pre-galvanized)
WSST-06-(*) Stainless steel
WSHT-06-(*) Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
Single or double channel hangerenables suspension of the traysystem. Designed for use with1/2” threaded rod (order rodand hardware separately).
Replace (*) with reference for material type:
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316
H104-1/2x3(*) 1/2” threaded rod (13 threads/inch)with design load of 1130 lbs
H119-1/2(*) Coupling for 1/2” threaded rod(length 1 1/4”)
Part No. Description Part No. variable (*)
Standard rod length 3 m. Rod & coupling available in metric sizes to special order - contact Thomas & Betts.
For securing channel tray totrays with reduced width.Order hardware separately.
WALT-(*)-CBP Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-CBP Steel (pre-galvanized)
WSST-(*)-CBP Stainless steel
WSHT-(*)-CBP Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
WALT-(*)-TCB Aluminium Replace (*) with doubledigit reference for traywidth:
01 = 1 1/2” 03 = 3”04 = 4” 06 = 6”
WSPT-(*)-TCB Steel (pre-galvanized)
WSST-(*)-TCB Stainless steel
WSHT-(*)-TCB Steel (hot dip galvanized)
Part No. Material/Tray type Part No. variable (*)
For securing the tray systemto the floor/horizontal surfaces.Order hardware separately.
For mounting channel tray tosupports or cable tray systems.Order hardware separately.
Single
Double
Stainless steel 304 available to special order. Hardware available in metric sizes to special order - contact Thomas & Betts.
Hex head cap screw
13
Metal framing channel
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Superstrut®
Standard finish: electro-galvanized. Stainless steel channel nuts are recommended for aluminiumchannel - change suffix to SS4 or SS6 as required.
E142-(*)-(+) Hex head cap screw Replace (*) with referencefor size:
1/4x100 = 1/4” x 1”1/4x150 = 1/4” x 1 1/2”3/8x100 = 3/8” x 1”3/8x150 = 3/8” x 1 1/2”1/2x100 = 1/2” x 1”1/2x150 = 1/2” x 1 1/2”
Replace (+) with referencefor material/finish type:
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316
Part No. Description Part No. variable (*) Part No. variable (+)
Cap screw available in metric sizes to special order - contact Thomas & Betts.
Channel nuts
Superstrut® 2.5 mm (12 Ga.) & 2 mm (14 Ga.) channel - type A and type B
Metal framing channel available in 2.5 mm (12 Gauge) and 2 mm (14 Gauge) thickness.Aluminium, hot dip galvanized or stainless steel channels are recommended to supportaluminium, steel or stainless steel channel tray. Offered in lengths of 10 ft, 20 ft, 3 m or 6 m.
A Series channel - 1 5/8” x 1 5/8” / 41 mm x 41 mm
A1200-(*)-(+)M A1400-(*)-(+)M Solid base Replace (*)with ref.for length:
10 = 10 ft20 = 20 ft3 = 3 m6 = 6 m
Replace (+) with ref. formaterial/finish type:
AL = AluminiumHDG = Hot dip galvanizedPG = Pre-galvanizedT304 = Stainless steel 304T316 = Stainless steel 316
A1200-P-(*)-(+)M A1400-P-(*)-(+)M Punched
A1200-S-(*)-(+)M A1400-S-(*)-(+)M Long slots
A1200-HS-(*)-(+)M A1400-HS-(*)-(+)M Half slots
A1202-(*)-(+)M A1402-(*)-(+)M Back to back
Part No. Part No. Part No. Part No.(12 Ga.) (14 Ga.) Description variable (*) variable (+)
B Series channel - 1 5/8” x 13/16” / 41 mm x 21 mm
B1200-(*)-(+)M B1400-(*)-(+)M Solid base Replace (*)with ref.for length:
10 = 10 ft20 = 20 ft3 = 3 m6 = 6 m
Replace (+) with ref. formaterial/finish type:
AL = AluminiumHDG = Hot dip galvanizedPG = Pre-galvanizedT304 = Stainless steel 304T316 = Stainless steel 316
B1200-P-(*)-(+)M B1400-P-(*)-(+)M Punched
B1200-S-(*)-(+)M B1400-S-(*)-(+)M Long slots
B1200-HS-(*)-(+)M B1400-HS-(*)-(+)M Half slots
B1202-(*)-(+)M B1402-(*)-(+)M Back to back
1-7/8"
2" 4"
Solid base Punched
Half slots Long slots
Back toback
A Series
1 5/8”41 mm
1 5/8”41 mm
21 mm
1 5/8”41 mm
13/16”
B Series
7/8”22 mm nominal
7/8”22 mm nominal
Nut is squareover 1/2” size
A100 B100
AB100
Nut is squareover 1/2” size
Standard finish: electro-galvanized. Stainless steel channel nuts are recommended for aluminiumchannel - change suffix to SS4 or SS6 as required.
A100 is designed for A Series channel, and B100 is for B Series. A100 and B100 available in imperialsizes ranging from 1/4” to 7/8”, and metric sizes from M6 to M22. AB100 available in imperial sizesranging from 1/4” to 3/4”, and metric sizes from M6 to M20.
A100-(*)-(+) Spring nut
B100-(*)-(+) Spring nut
Replace (*) with referencefor thread size:
1/4 = 1/4”/M6 5/16 = 5/16”/M83/8 = 3/8”/M10 1/2 = 1/2”/M125/8 = 5/8”/M16 3/4 = 3/4”/M207/8 = 7/8”/M22
Replace (+) with ref. formaterial/finish type:
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316AB100-(*)-(+) Springless nut
Part No. Description Part No. variable (*) Part No. variable (+)
14
Fittings and bracketsSuperstrut®
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Superstrut® channel brackets are available in other lengths on request. Contact Thomas & Betts for further information.
AB241-1/4(*) 1/4”
AB241-3/8(*) 3/8”
AB241-3/4(*) 3/4”
AB241-1/2(*) 1/2”
Part No. Hole size
AB206(*) AB207(*) X207(*)
AB201(*) AB202(*) AB203(*)AB205(*)
AB213(*) AB214(*) AB254-R(*)
AB204(*)
AB254-L(*)
AP235H(*)
X289(*)
AP232(*)
S249-8(*) 8 1/2” 8” 1500 lb
S249-14(*) 14 1/2” 9” 1500 lb
S249-26(*) 26 1/2” 11 1/2” 1500 lb
S249-20(*) 20 1/2” 9” 1500 lb
S249-32(*) 32 1/2” 11 1/2” 1500 lb
S249-38(*) 38 1/2” 11 1/2” 1500 lb
Part No. A B Load
S251-14(*) 14 1/2” 1650 lb
S251-20(*) 20 1/2” 800 lb
S251-32(*) 32 1/2” 500 lb
S251-26(*) 26 1/2” 650 lb
S251-38(*) 38 1/2” 500 lb
Part No. A Load
Fittings and brackets are available in four materials. To create specific part numbers,replace the part number variable (*) with the relevant material code shown right:
Note: Hot dip galvanized HDG or stainless steel fittings (SS6 or SS4) are recommended toassemble aluminum channel.
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316
Standard dimensions: Hole spacing: 13/16” from end, 1 7/8” centres Hole size: 9/16” diameter, fitting width 1 5/8”
Superstrut® fittings and brackets
Note: may be installed inverted with no change in load ratings. Strut sectionmade from half slot channel.
45⁄8"3"
A
S250-6(*) 6” 1500 lb
S250-12(*) 12” 800 lb
S250-24(*) 24” 400 lb
S250-18(*) 18” 550 lb
Part No. A Load
15
Additional solutions Channel tray
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Available in aluminium, orsteel in a range of finishes,with formats from mediumduty to ultra heavy duty, T&Bperforated tray is the all-roundperformer in our portfolio ofcable tray solutions.
The perforation patternincludes vertical and squareslots for fixing Ty-Rap® cableties etc, to enable bettersegregation and easierbundling of cables.
T&B cable ladder combineshigh performance withreduced costs to deliver theultimate solution for providingsupport to heavy duty cabling.
Designed to NEMA standards,and highly corrosion resistant,cable ladder is available insteel or aluminium, in a varietyof styles and sizes.
Cable ladder is offered witha full suite of fittings andaccessories for maximumflexibility on-site.
The ExpressTrayTM cablemanagement system is acomplete solution formanaging light power, voice& data cables in commercialand industrial facilities, thatdelivers simplicity, efficiency,versatility and performance.
Requiring no corner, cross orbend elements, any layoutcan be achieved simply witha length of tray and a pair ofwire cutters.
Custom-built cable supportfor petrochemical projecttanks or towers.
This cable tray system is usuallyinstalled around the outerperimeter of the catwalks andstairs which are mounted onthe tank or vessel.
Designed to special order tomeet specific project needs.
Cable ladder Perforated cable tray
ExpressTrayTM wire frame cable trayLarge radius cable tray
0.152” 3.86 mm
0.188” 4.78 mm
1/4” 6.35 mm
5/16” 7.94 mm
3/8” 9.53 mm
1/2” 12.7 mm
9/16” 14.29 mm
5/8” 15.9 mm
3/4” 19.05 mm
13/16” 20.64 mm
7/8” 22.23 mm
1 1/4” 31.75 mm
1 3/8” 34.93 mm
1 7/16” 36.51 mm
1 1/2” 38.1 mm
1 5/8” 41.28 mm
1 3/4” 44.45 mm
1 11/16” 42.86 mm
1 7/8” 47.63 mm
2” 50.8 mm
2.175” 55.25 mm
2 1/4” 57.15 mm
3” 76.2 mm
3 1/4” 82.55 mm
3 1/2” 88.9 mm
4” 101.6 mm
4 1/8” 104.78 mm
5 3/8” 136.53 mm
6” 152.4 mm
7 1/4” 184.15 mm
8” 203.8 mm
8 1/2” 215.9 mm
9” 228.6 mm
11 1/2” 292.1 mm
12” 304.8 mm
14 1/2” 368.3 mm
18” 457.2 mm
20 1/2” 520.7 mm
24” 609.6 mm
26 1/2” 673.1 mm
32 1/2” 825.5 mm
38 1/2” 977.9 mm
Imperial to metric conversion chart
inches mm inches mm inches mm inches mm inches mm
All channel tray measurements in this publication are based on imperial sizes. Please use the following chart for conversions of imperial measurementsto metric as required when assessing channel tray projects.
K.S.A. PROJECT OFFICE
Thomas & Betts Saudi Arabia
Building 128
Dammam Industrial Area #2
PO Box 514
Al Khobar 31952
Saudi Arabia
Tel +966 (0)3 812 1222
Fax +966 (0)3 812 2981
MIDDLE EAST SALES OFFICE
Thomas & Betts Ltd. Br.
Office 724 6WA West Wing
Dubai Airport Free Zone
PO Box 54567
Dubai
United Arab Emirates
Tel +971 (0)4 609 1635
Fax +971 (0)4 609 1636
www.tnb-europe.com
EUROPEAN HEADQUARTERS
Thomas & Betts
European Centre SA
200 Chaussée de Waterloo
B-1640 Rhode-St-Genèse
Belgium
Tel +32 (0)2 359 8200
Fax +32 (0)2 359 8201
UK OFFICE
Thomas & Betts Limited
Wilford Road
Nottingham
NG2 1EB
United Kingdom
Tel +44 (0)115 964 3700
Fax +44 (0)115 986 0538
The content of this Thomas & Betts catalogue has been carefully checked for accuracy at the time of print. However, Thomas & Bettsdoesn’t give any warranty of any kind, express or implied, in this respect and shall not be liable for any loss or damage that may resultfrom any use or as a consequence of any inaccuracies in or any omissions from the information which it may contain. E&OE.
Copyright Thomas & Betts Corp. 2011. Copyright in these pages is owned by Thomas & Betts except where otherwise indicated. No partof this publication may be reproduced, copied or transmitted in any form or by any means, without our prior written permission. Images,trade marks, brands, designs and technology are also protected by other intellectual property rights and may not be reproduced orappropriated in any manner without written permission of their respective owners. Thomas & Betts reserves the right to change andimprove any product specifications or other mentions in the catalogue at its own discretion and at any time. These conditions of use aregoverned by the laws of the Netherlands and the courts of Amsterdam shall have exclusive jurisdiction in any dispute.
TB-LDAS-CT-1011
Cable Management Systems
Cable ladder
Cable ladder Introduction
Commercial� Offices & retail centres
� Hotels & resorts
� Stadia & concert halls
Public sector� Schools & universities
� Hospitals & healthcare
� Government buildings
Industrial� Automotive plants
� Food processing
� Pharmaceutical & manufacturing
Oil & Gas� Petrochemical plants
� Oil & Gas refineries
� Offshore platforms
Infrastructure� Airports
� Rail terminals
� Tunnels
Utilities� Power stations
� Water treatment facilities
Thomas & Betts is a global leader in the design, developmentand supply of cable support and management solutions.
From Ty-Rap® cable ties to complete cable tray systems, Thomas& Betts products are renowned for delivering robust, reliable andhigh performance solutions to the electrical marketplace.
With a long history of excellence and innovation, Thomas & Betts productsoffer the complete solution to your electrical needs.
Thomas & Betts is now manufacturing cable tray systems, including cableladder, perforated tray, channel tray and strut (metal framing), directly fromour new production facility at Dammam in Saudi Arabia.
Combining local manufacture and distribution with an extensive productrange, this facility ensures we can effectively support customer demandand respond rapidly to project timelines for all types of installation acrossthe Middle East.
So, whether specifying a major new project, or simply refurbishing existingfacilities, choose Thomas & Betts cable tray to deliver the most effective,reliable and long lasting support for your cabling needs.
Delivering worldclass solutions in
cable management.
Thomas & Betts cable ladder isideal for a wide range of commercial,industrial & public sector projects:
3
Cable ladderIntroduction
Increased adaptability
More than ever, businesses musthave flexibility - to expand facilitiesquickly, to introduce new processesor product lines as demand dictates.
A major advantage of cable ladderis its adaptability to meet new needsand technology.
System modification, redesign orexpansion is a simple task becausecables can enter or exit the ladderat any point. There is no need toreplace the entire system, ensuringminimal disruption to site activity.
Enhanced safety
Cable ladder proves much safer thanconduit installation, with lower riskof exposure to live, energised parts.
In a cable ladder system, cables canbe pulled from near one terminationenclosure to the next before beingconnected, rather than being pulledthrough the conduit after the cableis terminated.
Low maintenance
Cable ladder wiring systems havea lower maintenance demand thanconduit systems.
When maintenance is necessary, itproves easier, less labour intensive,and requires less time to complete.
First class support
Thomas & Betts combines globalmarket leadership with local product& technical support, either throughour network of distributors, or viaour T&B sales office in Dubai and ourproduction facility at Dammam.
Extensive product range
Thomas & Betts cable ladder isavailable in aluminium or steelwith a range of finishes.
Straight sections can be orderedin a variety of lengths and bottomstyles, and are accompanied byan extensive selection of fittings,covers and accessories to ensureall installation needs are covered.
Reduced costs
The adaptability, reliability and easeof maintenance of T&B cable ladderresult in many types of cost saving,including:
� Lower installation, engineeringand maintenance costs
� Lower need to reconfigure thesystem as needs change
� Reduced downtime for electricaland data handling systems
� Fewer environmental problemsresulting from loss of power toessential equipment
Contents
Introduction to cable ladder 4 - 5
Straight section 6 - 7
Fittings 8 - 15
Covers 16 - 20
Accessories 21 - 31
Superstrut® 32 - 33
Additional solutions 34 - 35
Imperial to metric 35conversion chart
Thomas & Betts cable ladder offerssignificant advantages over conduitpipe and other wiring systems.
Cable ladder is a more reliable, lessexpensive solution for supportingcable, which is easier to maintain,proves more adaptable to changingneeds, and is more suitable for harshand corrosive environments.
In specifying T&B cable ladder, youwill be choosing a highly versatilesolution which delivers quality andperformance over the long term.
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
4
Cable ladder Introduction
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Ladder
Longitudinal rungs are welded to extruded siderails for maximum structuralstrength. Rungs are extra wide for maximum cable bearing, and havecontinuous open slot for strut pipe clamps and barrier strip adjustability.
Every second rung is reversed for easy top or bottom mounting of cable tiesand clamps, with exclusive Ty-Rap® slots on 1” centres. This ensures cablescan be secured without kinks and keeps cables uniform.
Ventilated
Comprising longitudinal rails and a bottom with openings sufficient for thepassage of air. Rungs are extra wide for maximum cable bearing, and havecontinuous open slot for strut pipe clamps and barrier strip adjustability.Every second rung is reversed for easy top or bottom mounting of cable tiesand clamps, with exclusive Ty-Rap® slots on 1” centres. This ensures cablescan be secured without kinks and keeps cables uniform.
Solid trough
A fabricated structure consisting of a bottom without ventilation openingswithin separate longitudinal siderails.
Rungs are not alternated (up/down), however have perforations and, wherenecessary, Ty-Raps® can be inserted diagonally between rung and bottomsheet for cable fastening. This design offers added cable protection.
Thomas & Betts cable ladder isavailable in four material typesand three bottom types, formaximum versatility.
Aluminium (to 6063 T6)
Aluminium 6063 T6 alloy for lightweight construction, excellent corrosionresistance, and high strength-to-weight ratio. Aluminium cable ladder offerssimple installation and low maintenance.
Pre-galvanized steel (to BS EN 10142 & BS EN 10143)
Steel is ideal as a high strength, low cost material for cable ladder.
Pre-galvanized steel ladder is produced by passing low-carbon steel throughmolten zinc before fabrication, and is generally recommended for indoorcommercial applications rather than outdoor or industrial environments.
Hot dip galvanized steel (to BS EN ISO 1461)
Hot dip galvanized steel ladder is produced by immersing fabricated ladderin molten zinc, creating a much thicker coating than pre-galvanized. Thisprocess is recommended for most outdoor and harsh industrial applications.
Stainless steel (to AISI Type 316 or 304)
Stainless steel offers high strength and high resistance to chemicals, evenat high ambient temperatures. T&B stainless steel cable ladder is roll-formedfrom AISI Type 316 stainless steel as standard, with Type 304 stainless steelavailable to special order.
Material types
� Aluminium
� Steel (pre-galvanized, hot dipgalvanized & stainless steel)
Bottom types
� Ladder
� Ventilated
� Solid trough
Note: cable ladder edges and welds are rounded and smoothed during manufacture to prevent cable damage. Careshould be taken when handling cable ladder and protective gloves should be worn to avoid risk of injury.
5
B
C
D
E
GH
I
J
L
M
N
A
F
P
O
K
Q
Cable ladderIntroduction
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Barrier strip
Box connector
Flat cover
Horizontal cross
Horizontal 45°
Horizontal 90°
Horizontal tee
Ladder section
Peaked cover
Right reducer
Solid trough section
Splice plate
Solid channel tray
Ventilated section
Vertical 90º outside
Vertical 90º inside
Vertical tee
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Straight section
Pre-fabricated steel or aluminiumsections with siderails connectedby transverse rungs.
Available in a range of materials,lengths and bottom types to coverall installation options.
Supplied complete with 7” spliceplates for connection to fittings,other sections etc. (aluminium spliceplates ‘snap-in’ for easy installation).
Fittings
Including bends, reducers, wyes, teesand crosses, fittings enable a cableladder system to change direction,elevation or size to meet buildingdesign/cable run constraints.
T&B aluminum cable ladder iscomposed of two distinct systems -H-style & U-style.
These systems are interchangeable.
Covers
Available for all cable ladder widthsand material types, covers providemechanical protection and should beinstalled where falling objects maydamage cables or where verticalcable ladder runs are accessible bypedestrian or vehicular traffic.
Styled as solid, ventilated or peaked,for varying installation needs.
Thomas & Betts cable ladderdelivers the complete, versatilesolution for cable management,with straight sections, fittings,and covers etc., developed toovercome the design constraintsfound in all kinds of buildingsand locations.
Accessories
A complete line of accessories andsupports to supplement the functionof straight sections and fittings,including drop-outs, hold downclamps, splice plates, barrier strips,and Superstrut® support solutions.
Barrier strips are fully adjustable(side to side) for use in straightsections and fittings.
Straight sections and fittings providethe flexibility to allow cable ladderinstallations to follow cable runswhich are either planned for newprojects or already exist in buildings,as shown in the illustration right.
6
Cable ladder Straight section
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Straight section part numbers arecreated using a range of selectioncriteria.
Determine the most suitable cableladder type based on the parameters1 - 5 shown right, then use the tableson the following page to create theexact part number for your needs.
4” MAH-0-4 3” 8B 75 112 8 2.4MAH-1-4 12A 50 74 12 3.7MAH-2-4 12B 75 112 12 3.7MAH-3-4 12C 100 149 12 3.7MAH-4-4 20A 50 74 20 6.0MAH-5-4 20B 75 112 20 6.0
6” MAH-0-6 5” 12B 75 112 12 3.7MAH-1-6 12C 100 149 12 3.7MAH-2-6 20A 50 74 20 6.0MAH-3-6 20B 75 112 20 6.0MAH-4-6 20C 100 149 20 6.0MAH-5-6 20C 100 149 20 6.0MAH-6-6 20C 100 149 20 6.0
5” MAH-2-5 4” 12C 100 149 12 3.7MAH-3-5 20A 50 74 20 6.0MAH-4-5 20B 75 112 20 6.0
7” MAH-2-7 6” 20B 75 112 20 6.0MAH-2C-7 20C 100 149 20 6.0MAH-3-7 20C 100 149 20 6.0
Siderail Series Load depth NEMA Load Spanheight (nominal) Class lb/ft kg/m ft m
3 5/8” MS*-1-3 2 5/8” 12A 50 74 12 3.7
4” MS*-1-4 3” 12C 100 149 12 3.7MS*-3-4 20A 50 74 20 6.0
6” MS*-0-6 5” 12C 100 149 12 3.7MS*-1-6 20A 50 74 20 6.0MS*-3-6 20B 75 112 20 6.0MS*-4-6 20C 100 149 20 6.0
5” MS*-2-5 4” 20A 50 74 20 6.0MS*-4-5 20B 75 112 20 6.0MS*-5-5 20C 100 149 20 6.0
7” MS*-3-7 6” 20C 100 149 20 6.0
Siderail Series Load depth NEMA Load Spanheight (nominal) Class lb/ft kg/m ft m
Replace * with letter reference for material type:
P = Pre-galvanized H = Hot dip galvanized S = Stainless steel 316
1. Select the material best suitedto the installation environment
2. Define the ladder series to NEMAclass/loadings (see tables belowfor aluminium/steel loadings)
3. Select the nominal siderail height(depth) and width of ladder
4. Specify the bottom type basedon the cables/spacing required
5. Establish the length of cableladder in metres or inches
Note: All straight section typesare suitable for use with bothU-style and H-style fitting systems.
Product selection - straight section
Straight section
Straight sections are available inaluminium, or steel in a rangeof finishes.
Straight sections utilize a 7” spliceplate and the fittings have tangentsat the extremities. This style offersenhanced aesthetics and rigidity tothe end-user.
Pre-fabricated aluminium sectionwith siderails connected by rungs.
Features
� 6063 T6 Aluminium alloyconstruction
� H-beam siderail design withnominal height 4” to 7”
� Loading height 3” to 6”
� Extra wide rung design withcontinuous open slot, reverseposition every second rungand Ty-Rap® cable tie slots(5/8” x 5/8”) on 1” centres
� Snap-in splice plates includedwith straight section
� Choice of two styles of fittingsiderail (U-style & H-style)
Pre-fabricated steel section withsiderails connected by rungs.
Features
� Choice of pre-galvanized,hot dip galvanized or type316 stainless steel (type 304stainless steel to special order)
� Nominal siderail height3 5/8” to 7”
� Loading height 2 5/8” to 6”
� Extra wide rung design withcontinuous open slot, reverseposition every second rungand Ty-Rap® cable tie slots(5/8” x 5/8”) on 1” centres
� Splice plates included withstraight section
Aluminium Steel
Load rating/NEMA Class - aluminium Load rating/NEMA Class - steel
7
Cable ladderStraight section
* Series 0 is not available in 24 ftor 6 m lengths.
** Series MAH-1-4 is not availablein 24 ft or 6 m lengths.
MAH I Aluminium 06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
L06 I 6” rung spacing
L09 I 9” rung spacing
L12 I 12” rung spacing
V I Ventilated
S I Solid trough
144 I 12 ft
288 I 24 ft
3 I 3 m
6 I 6 m
Material SeriesSiderailheight
Ladderwidth
Bottom type Length
0 I Series 0*1 I Series 1**2 I Series 23 I Series 34 I Series 45 I Series 5
4 I 4”
5 I 5”
6 I 6”
7 I 7”2 I Series 22C I Series 2C3 I Series 3
2 I Series 23 I Series 34 I Series 4
0 I Series 0*1 I Series 12 I Series 23 I Series 34 I Series 45 I Series 56 I Series 6
MSP I Pre-galvanized steel
MSH I Hot dip galvanizedsteel
MSS I Stainless steel 316*
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
L06 I 6” rung spacing
L09 I 9” rung spacing
L12 I 12” rung spacing
V I Ventilated
S I Solid trough
144 I 12 ft
288 I 24 ft
3 I 3 m
6 I 6 m
Material SeriesSiderailheight
Ladderwidth
Bottom type Length
1 I Series 1** 3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
0 I Series 0**1 I Series 13 I Series 34 I Series 4
3 I Series 3
1 I Series 1**3 I Series 3
2 I Series 24 I Series 45 I Series 5
MAH-1-6-24-L09-144
MSP-1-6-24-L09-144
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Select the preferred component parts and createthe specific part number as per the example shown.
Select the preferred component parts and createthe specific part number as per the example shown.
* Stainless steel 304 is available tospecial order.
** Series 1-3, 1-4 and 0-6 is notavailable in 24 ft or 6 m lengths.
Straight section - aluminium
Straight section - steel
Cable ladder Fittings
7”
1.96”
Now withtangents
8
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Fittings constructed with thesiderail flanges on the insideonly, creating a U-shapedfitting style.
Features:
� Simple, functional design
� Tangents on fittings
� 7” splice plate (aluminiumsplice plates ‘snap-in’ foradded convenience)
Benefits:
� Offers maximum quality versuscost ratios of the installation
� Easy to install
� Occupies less space in areaswhere space is restricted
� Easy alignment betweenstraight sections and fittings
� Splice plate holds componentswhile hardware is inserted
� Lighter fittings are easyto handle
7”
3”
3”
1.96”
Fittings constructed with thesiderail having inner and outerflanges, creating a H-shapedfitting style.
Features:
� Premium yet simple design
� 3” tangents on fittings
� 7” splice plate (aluminiumsplice plates ‘snap-in’ foradded convenience)
Benefits:
� Enhanced aesthetics andcustomer appeal
� Easy to install
� Improved system rigidity
� Easy alignment betweenstraight sections and fittings
� Splice plate holds componentswhile hardware is inserted
Fittings
Fittings enable a cable ladder systemto change direction, elevation or sizein order to meet building design andcable run constraints.
The range includes:
� Horizontal bends
� Vertical bends
� Tees and crosses
� Reducers
� Reducing tees and crosses
� Expanding tees
� Horizontal wyes
� Cable support
For aluminium cable ladder, twostyles of fitting are available -H-style and U-style.
Select the fitting style that ispreferred or best meets theproject criteria and budget.
Note: H-style and U-style aluminiumfittings are interchangeable.
Product selection - fittings
Fitting part numbers are basedon a range of selection criteria,dependent on the type of fittingand the role undertaken in thecable ladder system.
Over the following pages, theselection criteria for each fittingtype is established in table form.
The variables for selection include:
� Material type
� Siderail height & ladder width(s)
� Bottom type and fitting type
� Angle
� Nominal radius
Specifiers should choose theappropriate component part fromthe lists shown in the tables andcreate the part number followingthe example shown.
Images of fittings are provided toassist with selection.
U-Style fitting(Aluminium/steel)
H-Style fitting(Aluminium only)
Horizontal bend
90º 60º 45º 30º
9
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Horizontal bends
AluminiumH-style
AluminiumU-style/steel
Note: Aluminium U-style and H-style fittings are interchangeable.
MAUF I Aluminium U-style
MAHF I Aluminium H-style
L I Ladder
V I Ventilated
S I Solid trough
HB I Horizontalbend
30 I 30º
45 I 45º
60 I 60º
90 I 90º
Fitting material& siderail style
Ladderwidth
Bottom type Fitting type Angle
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUF-4-24-L-HB-45-12
MSPF I Pre-galvanizedsteel U-style
MSHF I Hot dip galvanizedsteel U-style
MSSF I Stainless steel 316*U-style
Siderailheight
4 I 4”
5 I 5”
6 I 6”
7 I 7”
3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
Cable ladder
Horizontal bends enable the cable ladder system to change directionin the same plane.
Horizontal bends are available in all material types, siderail heights, ladderwidths and bottom types to match straight sections, and have a nominalradius of either 12”, 24”, 36” or 48”.
� Available with angles of 30º, 45º, 60º or 90º
Select the preferred component parts and createthe specific part number as per the example shown.
* Stainless steel 304 is available to special order.
Outside bend 90º 60º 45º 30º
Inside bend 90º 60º 45º 30º
AluminiumH-style
AluminiumU-style/steel
AluminiumU-style/steel
AluminiumH-style
10
Cable ladder Vertical bends
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Note: Aluminium U-style and H-style fittings are interchangeable.
MAUF I Aluminium U-style
MAHF I Aluminium H-style
L I Ladder
V I Ventilated
S I Solid trough
VI I Verticalinside bend
VO I Verticaloutside bend
30 I 30º
45 I 45º
60 I 60º
90 I 90º
Fitting material& siderail style
Ladderwidth
Bottom type Fitting type Angle
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUF-4-24-L-VO-45-12
MSPF I Pre-galvanizedsteel U-style
MSHF I Hot dip galvanizedsteel U-style
MSSF I Stainless steel 316*U-style
Siderailheight
4 I 4”
5 I 5”
6 I 6”
7 I 7”
3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
Vertical bends enable the cable ladder system to change directionto a different plane.
An inside vertical bend changes direction upward from the horizontalplane. An outside vertical bend changes direction downward from thehorizontal plane.
Vertical bends are available in all material types, siderail heights, ladderwidths and bottom types to match straight sections, and have a nominalradius of either 12”, 24”, 36” or 48”.
� Available with angles of 30º, 45º, 60º or 90º
Select the preferred component parts and createthe specific part number as per the example shown.
* Stainless steel 304 is available to special order.
Vertical bend
Vertical tee - up Vertical tee - down
Horizontal tee Horizontal cross Cable support
AluminiumU-style/steel
AluminiumH-style
AluminiumU-style/steel
AluminiumH-style
AluminiumU-style/steel
AluminiumH-style
11
Cable ladderTees, crosses & cable support
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Note: Aluminum U-style and H-style fittings are interchangeable.
MAUF I Aluminium U-style
MAHF I Aluminium H-style
L I Ladder
V I Ventilated
S I Solid trough
HT I Horizontal tee
HX I Horizontal cross
VTU I Vertical tee up
VTD I Vertical tee down
CS I Cable support
Fitting material& siderail style
Ladderwidth
Bottom type Fitting type
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUF-4-24-L-VTD-12
MSPF I Pre-galvanizedsteel U-style
MSHF I Hot dip galvanizedsteel U-style
MSSF I Stainless steel 316*U-style
Siderailheight
4 I 4”
5 I 5”
6 I 6”
7 I 7”
3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
Select the preferred component parts and createthe specific part number as per the example shown.
Horizontal tees and crosses enable joins to be made in the cableladder system at 90º angles, in the same plane.
Vertical tees enable joins to be made in the cable ladder system at90º angles, between horizontal and vertical planes.
Cable support provides a corner support which changes directionof the cable run downwards by 90º to a different plane.
Available in all material types, siderail heights, ladder widths and bottomtypes to match straight sections, with a nominal radius of either 12”, 24”,36” or 48”.
* Stainless steel 304 is available to special order.
Horizontal tee, horizontal cross & cable support
Expanding tee Expanding cross
AluminiumU-style/steel
AluminiumH-style
AluminiumU-style/steel
AluminiumH-style
12
Horizontal expanding tees & crosses
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Cable ladder
Note: Aluminium U-style and H-style fittings are interchangeable.
MAUF I Aluminium U-style
MAHF I Aluminium H-style
L I Ladder
V I Ventilated
S I Solid trough
ET I Horizontalexpanding tee
EX I Horizontalexpanding cross
Fitting material& siderail style
Ladderwidth 1
Bottom type Fitting type
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
Ladderwidth 2
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUF-4-24-36-L-EX-12
MSPF I Pre-galvanizedsteel U-style
MSHF I Hot dip galvanizedsteel U-style
MSSF I Stainless steel 316*U-style
Siderailheight
4 I 4”
5 I 5”
6 I 6”
7 I 7”
3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
Select the preferred component parts and createthe specific part number as per the example shown.
Horizontal expanding tees and crosses enable joins to be madein the cable ladder system to wider ladder widths, at 90º angles inthe same plane.
Available in all material types, siderail heights, ladder widths and bottomtypes to match straight sections, with a nominal radius of either 12”, 24”,36” or 48”.
� For expansion, ladder width 2 should be greater than ladder width 1
* Stainless steel 304 is available to special order.
Horizontal expanding tee & cross
Horizontal reducing tee
AluminiumU-style/steel
AluminiumH-style
13
Horizontal reducing tees
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Cable ladder
Note: Aluminum U-style and H-style fittings are interchangeable.
MAUF I Aluminium U-style
MAHF I Aluminium H-style
L I Ladder
V I Ventilated
S I Solid trough
RT I Horizontalreducing tee
Fitting material& siderail style
Ladderwidth 1
Bottom type Fitting type
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
Ladderwidth 2
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
MAUF-4-36-24-L-RT-12
MSPF I Pre-galvanizedsteel U-style
MSHF I Hot dip galvanizedsteel U-style
MSSF I Stainless steel 316*U-style
Siderailheight
4 I 4”
5 I 5”
6 I 6”
7 I 7”
3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
Select the preferred component parts and createthe specific part number as per the example shown.
Horizontal reducing tees enable joins to be made in the cableladder system to more narrow ladder widths, at 90º angles inthe same plane.
Available in all material types, siderail heights, ladder widths and bottomtypes to match straight sections, with a nominal radius of either 12”, 24”,36” or 48”.
� For reduction, ladder width 2 should be less than ladder width 1
* Stainless steel 304 is available to special order.
Horizontal reducing tee
Reducer Left Straight Right
14
ReducersCable ladder
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
AluminiumU-style/steel
AluminiumH-style
Note: Aluminium U-style and H-style fittings are interchangeable.
MAUF I Aluminium U-style
MAHF I Aluminium H-style
L I Ladder
V I Ventilated
S I Solid trough
HLR I Offset reducer - left
HSR I Straight reducer
HRR I Offset reducer - right
Fitting material& siderail style
Ladderwidth 1
Bottom type Fitting type
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
Ladderwidth 2
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
MAUF-4-36-24-L-HLR
MSPF I Pre-galvanizedsteel U-style
MSHF I Hot dip galvanizedsteel U-style
MSSF I Stainless steel 316*U-style
Siderailheight
4 I 4”
5 I 5”
6 I 6”
7 I 7”
3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
Select the preferred component parts and createthe specific part number as per the example shown.
Reducers enable joins to be made in the cable ladder system tofittings or straight sections of different widths, in the same plane.
An offset reducer has the reduction set to a single side (right or left). Astraight reducer has two symmetrical offset sides.
Available in all material types, siderail heights, ladder widths and bottomtypes to match straight sections.
� For reduction, ladder width 2 should be less than ladder width 1
* Stainless steel 304 is available to special order.
Offset & straight reducer
Horizontal wye Left Right
Horizontal wye
15
Horizontal wyes Cable ladder
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
AluminiumU-style/steel
AluminiumH-style
Note: Aluminum U-style and H-style fittings are interchangeable.
MAUF I Aluminum U-style
MAHF I Aluminum H-style
L I Ladder
V I Ventilated
S I Solid trough
HYL I Horizontal wye - left
HYR I Horizontal wye - right
Fitting material& siderail style
Ladderwidth
Bottom type Fitting type
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUF-4-36-L-HYL
MSPF I Pre-galvanized steelU-style
MSHF I Hot dip galvanized steelU-style
MSSF I Stainless steel 316*U-style
Siderailheight
4 I 4”
5 I 5”
6 I 6”
7 I 7”
3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
Select the preferred component parts and createthe specific part number as per the example shown.
Horizontal wyes enable joins to be made in the cable ladder systemin three directions, at a 45º interval in the same plane.
Available in all material types, siderail heights, ladder widths and bottomtypes to match straight sections.
* Stainless steel 304 is available to special order.
16
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Covers
Solid cover
Solid covers provide maximum mechanical protection for cables which havelimited heat build up. This version is supplied without a flange.
Solid flanged cover
The solid flanged cover is comparable to the solid cover, providing maximummechanical protection for cables which have limited heat build up, but alsoincludes a 1/2” flange.
Ventilated flanged cover
Ventilated flanged covers offer excellent mechanical protection whileallowing heat produced by cables to dissipate through vents in the surface.
Peaked flanged cover
Peaked covers have 15° rise at the peak, and offer mechanical protectionplus prevent accumulation of liquids on the cover (due to adverse weathercondition or accident).
Covers greater than 12” wide are available in 72” and 3 m lengths only.
Note: cover mounting hardware must be ordered separately for allcover types.
Cable ladder
Covers are available for all cable ladder widths and material types,in a range of styles - solid, ventilated or peaked - for varyinginstallation needs.
Covers provide mechanical protection to cable runs and should beinstalled where falling objects may damage cables or where verticalcable ladder run is accessible by pedestrian or vehicular traffic.
Outside cable ladder runs should be covered with a peaked flanged cover toprotect cable from adverse weather conditions.
17
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Covers Cable ladder
* Peaked covers greater than 12”wide available in 72” and 3 mlengths only.
MABW I Aluminium 06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
SNC I Solid non-flangedcover
SFC I Solid flanged cover
VFC I Ventilated flangedcover
PFC I Peaked flangedcover*
72 I 72”
144 I 12 ft
3 I 3 m
Material type SeriesLadderwidth
Cover type Length
1 I For cable ladder series:MAH-0-4, MAH-1-4
2 I For cable ladder series:MAH-2-4, MAH-3-4, MAH-4-4,MAH-5-4, MAH-2-5, MAH-3-5,MAH-4-5, MAH-0-6, MAH-1-6,MAH-2-6
3 I For cable ladder series:MAH-3-6, MAH-4-6, MAH-5-6,MAH-6-6, MAH-2-7, MAH-2C-7,MAH3-7
MSPW I Pre-galvanized steel
MSHW I Hot dip galvanized steel*
MSSW I Stainless steel 316**
SNC I Solid non-flanged cover
SFC I Solid flanged cover
VFC I Ventilated flanged cover
PFC I Peaked flanged cover
72 I 72”
144 I 12 ft
3 I 3 m
15 I 1.5 m*
Material typeLadderwidth
Cover type Length
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MABW-1-12-SNC-72
MSPW-12-SNC-3
* Hot dip galvanized covers are available in 72” & 1.5 m lengthsonly. Other materials available in 72”, 12 ft & 3 m lengths only.
** Stainless steel 304 is available to special order.
Product selection - covers
Cover part numbers are basedon a range of selection criteria,dependent on the type of coverrequired, and the need to coverstraight sections or fittings.
Covers are suitable for use withboth U-style and H-style fittings.
The variables for selection include:
� Material type & series
� Siderail height & ladder width(s)
� Cover and fitting type
� Angle
� Nominal radius
Over the following pages, theselection criteria for each covertype is established in table form.
Specifiers should choose theappropriate component part fromthe lists shown in the tables andcreate the part number followingthe example shown.
Select the preferred component parts and createthe specific part number as per the example shown.
Select the preferred component parts and createthe specific part number as per the example shown.
Cover - aluminium straight section
Cover - steel straight section
18
Cable ladder
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Covers
MAUW I Aluminium U-style
MAHW I Aluminium H-style
SNC I Solid non-flangedcover
SFC I Solid flanged cover
VFC I Ventilated flangedcover
PFC I Peaked flangedcover**
PVC I Peaked ventedflanged cover**
HB I Horizontal bend
VI I Vertical insidebend
30 I 30º
45 I 45º
60 I 60º
90 I 90º
Material &fitting style
Ladderwidth
Cover type Fitting type Angle
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUW-24-SNC-HB-60-12
MSPW I Pre-galvanizedsteel
MSHW I Hot dip galvanizedsteel
MSSW I Stainless steel 316*
MAUW I Aluminium U-style
MAHW I Aluminium H-style
SNC I Solidnon-flangedcover
SFC I Solid flangedcover
VFC I Ventilatedflanged cover
PFC I Peaked flangedcover**
PVC I Peaked ventedflanged cover**
VO I Verticaloutsidebend
30 I 30º
45 I 45º
60 I 60º
90 I 90º
Material &fitting style
Ladderwidth
Cover typeFittingtype
Angle
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
Siderailheight
4 I 4”
5 I 5”
6 I 6”
7 I 7”
MAUW-4-24-SNC-VO-90-12
MSPW I Pre-galvanizedsteel
MSHW I Hot dip galvanizedsteel
MSSW I Stainless steel 316*
3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
* Stainless steel 304 is available tospecial order.
** Peaked covers are not available inpre-galvanized steel.
* Stainless steel 304 is available tospecial order.
** Peaked covers are not available inpre-galvanized steel.
Select the preferred component parts and createthe specific part number as per the example shown.
Select the preferred component parts and createthe specific part number as per the example shown.
Cover - aluminium & steel - horizontal bend & vertical inside bend
Cover - aluminium & steel - vertical outside bend
19
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Covers Cable ladder
MAUW I Aluminium U-style
MAHW I Aluminium H-style
SNC I Solid non-flanged cover
SFC I Solid flanged cover
VFC I Ventilated flanged cover
PFC I Peaked flanged cover**
PVC I Peaked vented flanged cover**
HT I Horizontal tee**
HX I Horizontal cross
VTU I Vertical tee up
Material &fitting style
Ladderwidth
Cover type Fitting type
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUW-24-SNC-HT-12
MSPW I Pre-galvanizedsteel
MSHW I Hot dip galvanizedsteel
MSSW I Stainless steel 316*
** Peaked covers are not available in pre-galvanized steel,and are only available as horizontal tee.
Siderailheight
4 I 4”
5 I 5”
6 I 6”
7 I 7”
3 I 3 5/8”
4 I 4”
5 I 5”
6 I 6”
7 I 7”
MAUW I Aluminium U-style
MAHW I Aluminium H-style
SNC I Solid non-flanged cover
SFC I Solid flanged cover
VFC I Ventilated flangedcover
VTD I Vertical tee down
CS I Cable support
Material &fitting style
Ladderwidth
Cover type Fitting type
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUW-6-24-SNC-VTD-12
MSPW I Pre-galvanizedsteel
MSHW I Hot dip galvanizedsteel
MSSW I Stainless steel 316*
Select the preferred component parts and createthe specific part number as per the example shown.
Select the preferred component parts and createthe specific part number as per the example shown.
* Stainless steel 304 is available tospecial order.
* Stainless steel 304 is available tospecial order.
Cover - aluminium & steel - horizontal tee & cross, vertical tee up
Cover - aluminium & steel - vertical tee down & cable support
20
Cable ladder
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Covers
MAUW I Aluminium U-style
MAHW I Aluminium H-style
SNC I Solidnon-flangedcover
SFC I Solid flangedcover
VFC I Ventilatedflangedcover
RT I Horizontal reducing tee
ET I Horizontal expanding tee
EX I Horizontal expanding cross
Material &fitting style
Ladderwidth 2
Cover type Fitting type
12 I 12”
24 I 24”
36 I 36”
48 I 48”
Nominalradius
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
Ladderwidth 1
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUW-36-12-SNC-RT-12
MSPW I Pre-galvanized steel
MSHW I Hot dip galvanizedsteel
MSSW I Stainless steel 316*
MAUW I Aluminium U-style
MAHW I Aluminium H-style
SNC I Solidnon-flangedcover
SFC I Solid flangedcover
VFC I Ventilatedflangedcover
HLR I Horizontal reducer - left
HSR I Horizontal reducer- straight
HRR I Horizontal reducer - right
Material &fitting style
Ladderwidth 2
Cover type Fitting type
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
Ladderwidth 1
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
MAUW-36-12-SNC-HLR
MSPW I Pre-galvanized steel
MSHW I Hot dip galvanizedsteel
MSSW I Stainless steel 316*
MAUW I Aluminium U-style
MAHW I Aluminium H-style
SNC I Solid non-flanged cover
SFC I Solid flanged cover
VFC I Ventilated flanged cover
HYR I Horizontal wye - right
HYL I Horizontal wye - left
Material &fitting style
Cover type Fitting type
06 I 6”
09 I 9”
12 I 12”
18 I 18”
24 I 24”
30 I 30”
36 I 36”
Ladderwidth
MAUW-24-SNC-HYL
MSPW I Pre-galvanized steel
MSHW I Hot dip galvanizedsteel
MSSW I Stainless steel 316*
Select the preferred component parts and createthe specific part number as per the example shown.
Select the preferred component parts and createthe specific part number as per the example shown.
Select the preferred component parts and createthe specific part number as per the example shown.
Note: for reduction, ladder width 2 shouldbe less than ladder width 1. For expansion,ladder width 2 should be greater than ladderwidth 1.
Note: for reduction, ladder width 2 should be less thanladder width 1.
* Stainless steel 304 to special order.
* Stainless steel 304 to special order.
* Stainless steel 304 to special order.
Cover - aluminium & steel - horizontal reducing tee, horizontal expanding tee & cross
Cover - aluminium & steel - horizontal reducer
Cover - aluminium & steel - horizontal wye
21
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Accessories Cable ladder
Rigid indoor cover clamp for flat and flanged covers.Cannot be used with U-style fittings - use with MAH straights and MAHW fittings only.
WAB-SCC Zinc plated steel All sizes
Part No. Material Siderail height
Rigid indoor cover clamp for flat and flanged covers.
WAB-(*)-FCC Zinc plated steel Replace (*) with single digit reference forsiderail height:
3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7”WSP-(*)-SCC Steel (pre-galvanized)
WSS-(*)-SCC Stainless steel 316
Part No. Material Part No. variable (*)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Wrap around design offers added protection for rugged applications and outdoor conditions.Hardware included.
WAB-(*)-(+)-HCC Aluminium Replace (*) withsingle digit referencefor siderail height:
3 = 3 5/8” 4 = 4”5 = 5” 6 = 6” 7 = 7”
Replace (+) with double digitreference for ladder width:
06 = 6” 09 = 9” 12 = 12”18 = 18” 24 = 24” 30 = 30”36 = 36”
WSP-(*)-(+)-HCC Steel (pre-galvanized)
WSS-(*)-(+)-HCC Stainless steel 316
WSH-(*)-(+)-HCC Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Aluminium
Steel
Accessories and supportssupplement installationof straight sections, coversand fittings.
Accessories enable clamping ofcovers, separation of cables withinthe ladder rack and variablemounting, support and suspensionof the cable ladder system.
IMPORTANT NOTE: where the aluminium accessory part number prefix includes ‘B’ (e.g. ‘WAB’), this accessory can beused with both U-style and H-style fittings.
Quantity of standard cover clamps required:
Straight section 6 ft 4 pieces
12 ft/3 m 6 pieces
Horizontal and vertical bends 4 pieces
Tees 6 pieces
Crosses 8 pieces
Note: when using the heavy duty cover clamp, only half the quantity of pieces are required.
Economical cover clamp
Cover clamp
Heavy duty cover clamp
Extreme heavy duty cover clamp
Heavy duty peaked cover clamp
Combination hold down cover clamp
Raised cover clamp
Replace (*) with singledigit reference for coverseries:
1 = Series 1 2 = Series 23 = Series 3
Designed to secure flat and flanged covers with hold down feature.
Designed to raise cover above cable ladder for added ventilation.
Cover
Siderail
WAB-(*)-CCC Aluminium Replace (*) with single digit reference forsiderail height:
3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7”WSP-(*)-CCC Steel (pre-galvanized)
WSS-(*)-CCC Stainless steel 316
Part No. Material/Ladder type Part No. variable (*)
WAB-(*)(+)-RCC Aluminium Replace (+) with singledigit reference for coveroffset:
1 = 1” 2 = 2”3 = 3”
WSP-(+)-RCC Steel (pre-galvanized)
WSS-(+)-RCC Stainless steel 316
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Note: cover series reference is only required for aluminium cable ladder. Stainless steel 304 available to special order.
WAB-(*)-(+)-ECC Aluminium Replace (*) withsingle digit referencefor siderail height:
4 = 4” 5 = 5” 6 = 6”7 = 7”
Replace (+) with double digitreference for ladder width:
06 = 6” 09 = 9” 12 = 12”18 = 18” 24 = 24” 30 = 30”36 = 36”
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Wraparound design offers added protection for rugged applications and outdoor conditions.Hardware included.
WAB-(*)-(+)-HPC Aluminium
WSP-(*)-(+)-HPC Steel (pre-galvanized)
WSH-(*)-(+)-HPC Steel (hot dip galvanized)
WSS-(*)-(+)-HPC Stainless steel 316
Replace (*) withsingle digit referencefor siderail height:
3 = 3 5/8” 4 = 4”5 = 5” 6 = 6” 7 = 7”
Replace (+) with double digitreference for ladder width:
06 = 6” 09 = 9” 12 = 12”18 = 18” 24 = 24” 30 = 30”36 = 36”
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Wraparound design formed to fit peaked cover for outdoor applications. Hardware included.
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Aluminium
Steel
22
Cable ladder
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Accessories
Peaked end cap
Cover joint strip
Splice plate
Expansion splice plate
23
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Accessories Cable ladder
Packaged in pairs with zinc plated hardware. Aluminium versions ‘snap-in’ and are designed to lockinto place for easy alignment and installation.
WAB-(*)-SSP Aluminium Replace (*) with single digit reference forsiderail height:
3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7”WSP-(*)-SSP Steel (pre-galvanized)
WSS-(*)-SSP Stainless steel 316
WSH-(*)-SSP Steel (hot dip galvanized)
Part No. For ladder type Part No. variable (*)
Allows for a 1” expansion or contraction of the cable ladder system. Aluminium versions‘snap-in’ and are designed to lock into place for easy alignment and installation. Packagedin pairs with hardware.
Note: splice plates provided as standard with each straight and/or fitting. 3 5/8” siderail available for steel cable ladder only.Stainless steel 304 available to special order.
Aluminium
Steel
WAB-(*)-ESP Aluminium Replace (*) with single digit reference forsiderail height:
3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7”WSP-(*)-ESP Steel (pre-galvanized)
WSS-(*)-ESP Stainless steel 316
WSH-(*)-ESP Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*)
Aluminium
Steel
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Strip used for joining covers end to end. Manufactured from durable plastic material.
Part No. For ladder type Part No. variable (*)
Replace (*) with double digit reference forladder width:
06 = 6” 09 = 9” 12 = 12” 18 = 18”24 = 24” 30 = 30” 36 = 36”
WAB-(*)-SCS Aluminium
WSP-(*)-SCS Steel (pre-galvanized)Steel (hot dip galvanized)
Stainless steel 316
Used for transition between peaked covers and straight covers.
WAB-(*)-PEC Aluminium Replace (*) with double digit reference forladder width:
06 = 6” 09 = 9” 12 = 12” 18 = 18”24 = 24” 30 = 30” 36 = 36”
WSP-(*)-PEC Steel (pre-galvanized)
WSS-(*)-PEC Stainless steel 316
WSH-(*)-PEC Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*)
Stainless steel 304 available to special order.
24
Cable ladder Accessories
WAB-(*)-(+)-HAP Aluminium Replace (*) withsingle digit referencefor siderail height:
3 = 3 5/8” 4 = 4”5 = 5” 6 = 6” 7 = 7”
Replace (+) with double digitreference for ladder width:
06 = 6” 09 = 9” 12 = 12”18 = 18” 24 = 24” 30 = 30”36 = 36”
WSP-(*)-(+)-HAP Steel (pre-galvanized)
WSS-(*)-(+)-HAP Stainless steel 316
WSH-(*)-(+)-HAP Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Adjustable hinge plates provide maximum horizontal installation flexibility. Furnished in pairswith hardware.
Hinged vertical plates provide maximum flexibility for changes in elevation. Furnished in pairswith hardware.
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
WAB-(*)-VSP Aluminium Replace (*) with single digit reference forsiderail height:
3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7”WSP-(*)-VSP Steel (pre-galvanized)
WSS-(*)-VSP Stainless steel 316
WSH-(*)-VSP Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Use in pairs to provide a straight reduction or with a standard splice plate for an offset reduction.Packaged with hardware.
Note: (+) For offset reduction: insert width to be reduced. For straight reduction: insert halfwidth to be reduced (2 required). Example: MABW-4-03-RSP = 3” offset reducer.
WAB-(*)-(+)-RSP Aluminium Replace (*) withsingle digit referencefor siderail height:
3 = 3 5/8” 4 = 4”5 = 5” 6 = 6” 7 = 7”
Replace (+) with double digitreference for reduction value -single figures are preceded by‘0’ and decimals use first digit.
e.g.: 03 = 3” 15 = 15”01 = 1.5” 04 = 4.5”
WSP-(*)-(+)-RSP Steel (pre-galvanized)
WSS-(*)-(+)-RSP Stainless steel
WSH-(*)-(+)-RSP Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Connects siderails of different heights. Hardware included.
WAB-(*)-(+)-SDS Aluminium Replace (*) withsingle digit referencefor siderail height 1:
4 = 4” 5 = 5”6 = 6” 7 = 7”
Replace (+) withsingle digit referencefor siderail height 2:
3 = 3 5/8” 4 = 4”5 = 5” 6 = 6”
WSP-(*)-(+)-SDS Steel (pre-galvanized)
WSS-(*)-(+)-SDS Stainless steel 316
WSH-(*)-(+)-SDS Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order. When ordering, siderailheight 2 should be less than siderail height 1.
Reducing splice plate
Step down splice plate
Horizontal adjustable plate
Vertical adjustable plate
Closure end plate
Box to cable ladder plate
Frame type cable ladder to box plate
Wall penetration sleeve
25
Accessories Cable ladder
Designed to secure cable ladder to electrical panels or boxes, walls or end supports. Furnished inpairs with hardware.
WAB-(*)-BSP Aluminium Replace (*) with single digit reference forsiderail height:
3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7”WSP-(*)-BSP Steel (pre-galvanized)
WSS-(*)-BSP Stainless steel 316
WSH-(*)-BSP Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Provides closure for any cable ladder end. Packaged with hardware.
WAB-(*)-(+)-CEP Aluminium Replace (*) withsingle digit referencefor siderail height:
3 = 3 5/8” 4 = 4”5 = 5” 6 = 6” 7 = 7”
Replace (+) with double digitreference for ladder width:
06 = 6” 09 = 9” 12 = 12”18 = 18” 24 = 24” 30 = 30”36 = 36”
WSP-(*)-(+)-CEP Steel (pre-galvanized)
WSS-(*)-(+)-CEP Stainless steel 316
WSH-(*)-(+)-CEP Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Designed to secure cable ladder to electrical enclosures and panels. Hardware included.
WAB-(*)-(+)-FBP Aluminium Replace (*) withsingle digit referencefor siderail height:
3 = 3 5/8” 4 = 4”5 = 5” 6 = 6” 7 = 7”
Replace (+) with double digitreference for ladder width:
06 = 6” 09 = 9” 12 = 12”18 = 18” 24 = 24” 30 = 30”36 = 36”
WSP-(*)-(+)-FBP Steel (pre-galvanized)
WSS-(*)-(+)-FBP Stainless steel 316
WSH-(*)-(+)-FBP Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Designed to pass through walls and fire walls. Hardware included.
Note: Not Fire Rated. Fire Stop not included.
WAB-(*)-(+)-WPS Aluminium Replace (*) withsingle digit referencefor siderail height:
3 = 3 5/8” 4 = 4”5 = 5” 6 = 6” 7 = 7
Replace (+) with double digitreference for ladder width:
06 = 6” 09 = 9” 12 = 12”18 = 18” 24 = 24” 30 = 30”36 = 36”
WSP-(*)-(+)-WPS Steel (pre-galvanized)
WSS-(*)-(+)-WPS Stainless steel 316
WSH-(*)-(+)-WPS Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*) Part No. variable (+)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
26
Cable ladder Accessories
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Designed to provide a smooth radiused surface at any position on the ladder or trough bottom.Drop-outs are easily attached using hardware provided. Standard Radius = 4”.
Part No. Material Bottom type Part No. variable (*)
Replace (*) with double digitreference for ladder width:
06 = 6”09 = 9”12 = 12”18 = 18”24 = 24”30 = 30”36 = 36”
WAB-(*)-DO Aluminium Ladder/Ventilated
WAB-(*)-DOS Aluminium Solid
WSP-(*)-DO Steel (pre-galvanized) Ladder/Ventilated
WSP-(*)-DOS Steel (pre-galvanized) Solid
WSH-(*)-DO Steel (hot dip galvanized) Ladder/Ventilated
WSH-(*)-DOS Steel (hot dip galvanized) Solid
WSS-(*)-DO Stainless steel 316 Ladder/Ventilated
WSS-(*)-DOS Stainless steel 316 Solid
Barrier strips provide a method for separating cables in cable ladder systems. Easily installed usingsupplied hardware or barrier strip clamps (sold separately).
72” Barriers are flexible for use with horizontal fittings. WSH hot dip galvanized available in72” and 1.5 m lengths only. Other materials available in 72”, 144” and 3 m lengths only.
(*)-(+)-SBH-72 72” Replace (*) with three letterreference for material type:
WAB = AluminiumWSP = Steel (pre-galvanized)WSH = Steel (hot dip galvanized)WSS = Stainless steel 316
Replace (+) withsingle digit referencefor siderail height:
3 = 3 5/8” 4 = 4”5 = 5” 6 = 6” 7 = 7
(*)-(+)-SB-144 144”
(*)-(+)-SB-15 1.5 m
(*)-(+)-SB-3 3 m
Part No. Length Part No. variable (*) Part No. variable (+)
Note: 3 5/8” siderail available for steel cable ladder only. 72” barriers supplied as standard with 3 WSP-10-SCR (self-drillingtapping screw), 144” & 3 m barriers supplied as standard with 6 WSP-10-SCR. Stainless steel 304 available to special order.
SB
SBH
Pre-formed to fit all standard vertical bends. Provided with hardware.
(*)-3-VIB-(+)-(%) 3 5/8” Replace (*) with three letterreference for material type:
WAB = AluminiumWSP = Steel (pre-galvanized)WSH = Steel (hot dip galv.)WSS = Stainless steel 316
Replace (+) with bend angle:
90 = 90º 60 = 60º45 = 45º 30 = 30º
Replace (%) with bend radius:
12 = 12” 24 = 24”36 = 36” 48 = 48”
(*)-4-VIB-(+)-(%) 4”
(*)-6-VIB-(+)-(%) 6”
(*)-5-VIB-(+)-(%) 5”
(*)-7-VIB-(+)-(%) 7”
Part No. Siderail height Part No. variable (*) Part No. variable (+) (%)
Vertical inside bend
(*)-3-VOB-(+)-(%) 3 5/8” Replace (*) with three letterreference for material type:
WAB = AluminiumWSP = Steel (pre-galvanized)WSH = Steel (hot dip galv.)WSS = Stainless steel 316
Replace (+) with bend angle:
90 = 90º 60 = 60º45 = 45º 30 = 30º
Replace (%) with bend radius:
12 = 12” 24 = 24”36 = 36” 48 = 48”
(*)-4-VOB-(+)-(%) 4”
(*)-6-VOB-(+)-(%) 6”
(*)-5-VOB-(+)-(%) 5”
(*)-7-VOB-(+)-(%) 7”
Vertical outside bend
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Drop-out
Barrier strip
Inside/outside vertical bend barrier
Stainless steel 304 available to special order.
27
Accessories Cable ladder
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Alignment splice for joining connecting barrier strips.
WAB-BSS Plastic
Part No. Material
Barrier strip clamps mount barrier strips to ladder rungs and ventilated bottoms. Completemounting hardware supplied.
WSP-BSC Zinc plated steel
WSS-BSC Stainless steel 316
Part No. Material
Designed for most indoor installations. Easy to use and install. Order 3/8“ hardware separately.
WSP-(*)-SHC Zinc plated steel
WSS-(*)-SHC Stainless steel 316
WSS-(*)-SHC-HDW Stainless steel 316, supplied with 1/4” hardware
WSP-(*)-SHC-HDW Zinc plated steel, supplied with 1/4” hardware
Part No. Material
Order hardware separately.
WAB-HEC Aluminium
WSP-HEC Steel (pre-galvanized)
WSS-HEC Stainless steel 316
WSH-HEC Steel (hot dip galvanized)
Part No. Material
Aluminium
Steel
Stainless steel 304 available to special order.
Stainless steel 304 available to special order.
Stainless steel 304 available to special order.
Barrier strip clamp
Barrier strip splice
Standard hold down clamp
Combination hold down/expansion guide clamp
28
Cable ladder Accessories
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
WAB-(*)-HDC Aluminium Replace (*) with single digit reference forsiderail height:
3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7”WSP-(*)-HDC Steel (pre-galvanized)
WSS-(*)-HDC Stainless steel
WSH-(*)-HDC Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Designed to secure cable ladder to support system. Hardware included.
M6210 1/2” - 3/4”
M6212 1” - 1 1/4”
Part No. Conduit size
Standard finish: electro-galvanized steel.
M6209 1/2” - 3/4”
M6211 1” - 1 1/4”
M6214 1 1/2” - 2”
M6216 2 1/2” - 3”
M6218 3 1/2” - 4”
Part No. Conduit size
Swivel clamp for aluminium and steel cable ladder with regular or reinforced flanges.Material: zinc plated malleable iron hub, with steel U-bolt included.
� Serrations and biting teeth on clamping saddle provide a high quality bond betweenconduit and clamp
� 1/2” to 4” can be clamped to any position in a 90º arc
WAB-(*)-VTH Aluminium Replace (*) with single digit reference forsiderail height:
3 = 3 5/8” 4 = 4” 5 = 5” 6 = 6” 7 = 7”WSP-(*)-VTH Steel (pre-galvanized)
WSS-(*)-VTH Stainless steel 316
WSH-(*)-VTH Steel (hot dip galvanized)
Part No. Material/Ladder type Part No. variable (*)
Note: 3 5/8” siderail available for steel cable ladder only. Stainless steel 304 available to special order.
Hold down clamp
Conduit to cable ladder clamp
Conduit to cable ladder swivel clamp
Vertical cable ladder hanger
29
Accessories Cable ladder
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Expansion guide for single or double runs of cable ladder. No need to field drill the channelor H-beam.
WSP-CTG Zinc plated steel
WSS-CTG Stainless steel 316
WSH-CTG Steel (hot dip galvanized)
Part No. Material
Clamps for single run of cable ladder. No need to field drill the channel or H-beam.
WSP-CTC Zinc plated steel
WSS-CTC Stainless steel 316
WSH-CTC Steel (hot dip galvanized)
Part No. Material
Standard finish: hot dip galvanized steel. Hanging rods not included.
Note: order hold down clips separately - Part No. WSS-SHC.
MS202-6HDG 6” 5” -
MS202-9HDG 9” 8” 2”
MS202-15HDG 15” 14” 8”
MS202-21HDG 21” 20” 14”
MS202-27HDG 27” 26” 20”
MS202-33HDG 33” 32” 26”
Part No. A B C
Standard finish: hot dip galvanized steel.
Note: order hold down clips separately - Part No. WSS-SHC.
MS203-14HDG 14 1/2” 5 3/8” 1200 lbs
MS203-20HDG 20 1/2” 6 11/16” 1200 lbs
MS203-26HDG 26 1/2” 8” 1200 lbs
MS203-32HDG 32 1/2” 8” 1200 lbs
MS203-38HDG 38 1/2” 8” 1200 lbs
Part No. A B Design load
Stainless steel 304 available to special order.
Stainless steel 304 available to special order.
Cable ladder guide
Cable ladder clamp
Cantilever support
Cross member
Centre support bracket
Trapeze kit
Tray hardware
Cable ladder Accessories
30
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
WSP-1/4-CB Zinc plated steel Square shoulder self-positioning 1/4” carriage bolt
WSP-3/8-CB Zinc plated steel Square shoulder self-positioning 3/8” carriage bolt
WSP-3/8-HN Zinc plated steel 3/8” Hex. nut
WSP-1/4-HN Zinc plated steel 1/4” Hex. nut
WSS-3/8-CB Stainless steel 316 3/8” Carriage bolt
WSS-3/8-HN Stainless steel 316 3/8” Hex. nut
WSP-10-SCR Zinc plated steel Self-drilling tapping screw
WSS-3/8-HWK Stainless steel 316 Hardware kit inc. 8 nuts, 8 bolts & 8 lockwashers
Part No. Material DescriptionCarriage bolt
Self-drillingtapping screw
WSP-(*)-CSB Steel (hot dip galvanized) Replace (*) with double digit reference forchannel width:
18 = 18” (for 6” cable ladder)30 = 30” (for 9” to 24” cable ladder)
Part No. Description Part No. variable (*)
Cable support brackets are designed to reduce cable pulling by allowing access from both sidesof the cable ladder. Installation cost and time are reduced significantly by single point suspension.
� Supplied as a complete kit
� Uses 1/2’’ threaded rod (order separately)
� For use with up to 24’’ wide cable ladder
� Load capacity : 700 lb per kit
WSP-(*)-TPK Steel (pre-galvanized)
WSH-(*)-TPK Steel (hot dip galvanized)
WSS-(*)-TPK Stainless steel 316
Ladder width:channelwidth ratio:
6”:16 7/8” 9”:18 3/4”12”:22 1/2” 18”:28 1/8”24”:35 5/8” 30”:41 1/4”36”:46 7/8”
Part No. Description Part No. variable (*)
Trapeze kits are designed to support various cable ladder widths in a suspending installation.
Kit consists of 1 piece of strut cut to length, 4 x 3/8’’ strut nuts, 2 hold down clips, 4 x 1/2’’ hex nuts,2 x 3/8’’ x 7/8’’ hex head cap screws, 4 x 1/2’’ square washers.
Uses 1/2’’ threaded rod (order separately).
Replace (*) with doubledigit reference for ladderwidth:
06 = 6” 09 = 9”12 = 12” 18 = 18”24 = 24” 30 = 30”36 = 36”
Stainless steel 304 available to special order.
Stainless steel 304 available to special order. Hardware available in metric sizes to special order - contact Thomas & Betts.
Threaded rod
Threaded rod coupling
Accessories Cable ladder
31
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Replace (*) with referencefor material type:
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316
H104-1/4x3(*) 1/4” 20 150 lb
H104-3/8x3(*) 3/8” 16 610 lb
H104-1/2x3(*) 1/2” 13 1130 lb
H104-5/8x3(*) 5/8” 11 1810 lb
H104-3/4x3(*) 3/4” 10 2710 lb
H104-7/8x3(*) 7/8” 9 3770 lb
H104-1x3(*) 1” 8 4960 lb
Part No. Size Threads/inch Design load Part No. variable (*)
Replace (*) with reference for material type:
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316
H119-1/4(*) 1/4” 7/8”
H119-5/16(*) 5/16” 7/8”
H119-3/8(*) 3/8” 1 1/8”
H119-1/2(*) 1/2” 1 1/4”
Part No. Rod size A Part No. variable (*)
H119-5/8(*) 5/8” 2 1/8”
H119-3/4(*) 3/4” 2 1/4”
H119-7/8(*) 7/8” 2 1/2”
H119-1(*) 1” 2 1/4”
A
Coupling available in metric sizes to special order - contact Thomas & Betts.
Standard length 3 m. Rod available in metric sizes to special order - contact Thomas & Betts.
32
Superstrut® Metal framing channel
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Hex head cap screw
Standard finish: electro-galvanized. Stainless steel channel nuts are recommended for aluminiumchannel - change suffix to SS4 or SS6 as required.
E142-(*)-(+) Hex head cap screw Replace (*) with referencefor size:
1/4x100 = 1/4” x 1”1/4x150 = 1/4” x 1 1/2”3/8x100 = 3/8” x 1”3/8x150 = 3/8” x 1 1/2”1/2x100 = 1/2” x 1”1/2x150 = 1/2” x 1 1/2”
Replace (+) with referencefor material/finish type:
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316
Part No. Description Part No. variable (*) Part No. variable (+)
Cap screw available in metric sizes to special order - contact Thomas & Betts.
Superstrut® 2.5 mm (12 Ga.) & 2 mm (14 Ga.) channel - type A and type B
Channel nuts
Metal framing channel available in 2.5 mm (12 Gauge) and 2 mm (14 Gauge) thickness.Aluminium, hot dip galvanized or stainless steel channels are recommended to supportaluminium, steel or stainless steel cable ladder. Offered in lengths of 10 ft, 20 ft, 3 m or 6 m.
A Series channel - 1 5/8” x 1 5/8” / 41 mm x 41 mm
A1200-(*)-(+)M A1400-(*)-(+)M Solid base Replace (*)with ref.for length:
10 = 10 ft20 = 20 ft3 = 3 m6 = 6 m
Replace (+) with ref. formaterial/finish type:
AL = AluminiumHDG = Hot dip galvanizedPG = Pre-galvanizedT304 = Stainless steel 304T316 = Stainless steel 316
A1200-P-(*)-(+)M A1400-P-(*)-(+)M Punched
A1200-S-(*)-(+)M A1400-S-(*)-(+)M Long slots
A1200-HS-(*)-(+)M A1400-HS-(*)-(+)M Half slots
A1202-(*)-(+)M A1402-(*)-(+)M Back to back
Part No. Part No. Part No. Part No.(12 Ga.) (14 Ga.) Description variable (*) variable (+)
B Series channel - 1 5/8” x 13/16” / 41 mm x 21 mm
B1200-(*)-(+)M B1400-(*)-(+)M Solid base Replace (*)with ref.for length:
10 = 10 ft20 = 20 ft3 = 3 m6 = 6 m
Replace (+) with ref. formaterial/finish type:
AL = AluminiumHDG = Hot dip galvanizedPG = Pre-galvanizedT304 = Stainless steel 304T316 = Stainless steel 316
B1200-P-(*)-(+)M B1400-P-(*)-(+)M Punched
B1200-S-(*)-(+)M B1400-S-(*)-(+)M Long slots
B1200-HS-(*)-(+)M B1400-HS-(*)-(+)M Half slots
B1202-(*)-(+)M B1402-(*)-(+)M Back to back
1-7/8"
2" 4"
Solid base Punched
Half slots Long slots
Back toback
A Series
1 5/8”41 mm
1 5/8”41 mm
21 mm
1 5/8”41 mm
13/16”
B Series
7/8”22 mm nominal
7/8”22 mm nominal
Nut is squareover 1/2” size
A100 B100
AB100
Nut is squareover 1/2” size
Standard finish: electro-galvanized. Stainless steel channel nuts are recommended for aluminiumchannel - change suffix to SS4 or SS6 as required.
A100 is designed for A Series channel, and B100 is for B Series. A100 and B100 available in imperialsizes ranging from 1/4” to 7/8”, and metric sizes from M6 to M22. AB100 available in imperial sizesranging from 1/4” to 3/4”, and metric sizes from M6 to M20.
A100-(*)-(+) Spring nut
B100-(*)-(+) Spring nut
Replace (*) with referencefor thread size:
1/4 = 1/4”/M6 5/16 = 5/16”/M83/8 = 3/8”/M10 1/2 = 1/2”/M125/8 = 5/8”/M16 3/4 = 3/4”/M207/8 = 7/8”/M22
Replace (+) with ref. formaterial/finish type:
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316AB100-(*)-(+) Springless nut
Part No. Description Part No. variable (*) Part No. variable (+)
33
Fittings and brackets Superstrut®
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
AB241-1/4(*) 1/4”
AB241-3/8(*) 3/8”
AB241-3/4(*) 3/4”
AB241-1/2(*) 1/2”
Part No. Hole size
AB206(*) AB207(*) X207(*)
AB201(*) AB202(*) AB203(*)AB205(*)
AB213(*) AB214(*) AB254-R(*)
AB204(*)
AB254-L(*)
AP235H(*)
X289(*)
AP232(*)
S249-8(*) 8 1/2” 8” 1500 lb
S249-14(*) 14 1/2” 9” 1500 lb
S249-26(*) 26 1/2” 11 1/2” 1500 lb
S249-20(*) 20 1/2” 9” 1500 lb
S249-32(*) 32 1/2” 11 1/2” 1500 lb
S249-38(*) 38 1/2” 11 1/2” 1500 lb
Part No. A B Load
S251-14(*) 14 1/2” 1650 lb
S251-20(*) 20 1/2” 800 lb
S251-32(*) 32 1/2” 500 lb
S251-26(*) 26 1/2” 650 lb
S251-38(*) 38 1/2” 500 lb
Part No. A Load
Fittings and brackets are available in four materials. To create specific part numbers,replace the part number variable (*) with the relevant material code shown right:
Note: Hot dip galvanized HDG or stainless steel fittings (SS6 or SS4) are recommended toassemble aluminum channel.
Note: may be installed inverted with no change in load ratings. Strut sectionmade from half slot channel.
EG = Electro-galvanizedHDG = Hot dip galvanizedSS4 = Stainless steel 304SS6 = Stainless steel 316
Standard dimensions: Hole spacing: 13/16” from end, 1 7/8” centres Hole size: 9/16” diameter, fitting width 1 5/8”
Superstrut® fittings and brackets
45⁄8"3"
A
S250-6(*) 6” 1500 lb
S250-12(*) 12” 800 lb
S250-24(*) 24” 400 lb
S250-18(*) 18” 550 lb
Part No. A Load
Superstrut® channel brackets are available in other lengths on request. Contact Thomas & Betts for further information.
Cable ladder Additional solutions
34
Thomas & Betts Ltd. Br., Office 724 6WA West Wing, Dubai Airport Free Zone, PO Box 54567,Dubai, UAE Tel: +971 (0)4 609 1635 � Email: [email protected] � Web: www.tnb-europe.com
Available in aluminium, orsteel in a range of finishes,with formats from mediumduty to ultra heavy duty, T&Bperforated tray is the all-roundperformer in our portfolio ofcable tray solutions.
The perforation patternincludes vertical and squareslots for fixing Ty-Rap® cableties etc, to enable bettersegregation and easierbundling of cables.
T&B channel tray systemsprovide the ideal light dutysolution to cable support.
Suitable for supporting a widerange of telecoms, data, signal,computer and light powercables, channel tray is availablein solid or ventilated straightsections together with a fullsuite of fittings & accessories,to meet the demands of eventhe most complex installations.
Non-metallic cable tray istested and proven in theharsh environment of theoffshore oil & gas industry,where exposure to adverseand corrosive conditionsdemands a solution withunique material properties.
Non-metallic cable tray islightweight, neither rusts norrequires painting, and providesthe load capacity of steel.
The ExpressTrayTM cablemanagement system is acomplete solution formanaging light power, voice& data cables in commercialand industrial facilities, thatdelivers simplicity, efficiency,versatility and performance.
Requiring no corner, cross orbend elements, any layoutcan be achieved simply witha length of tray and a pair ofwire cutters.
E-Klips spring steel fastenersoffer a quick, easy and reliablemethod of fixing services tosteelwork without the needfor bracket making, drillingholes or use of nuts and bolts.
E-Klips fasteners are suitablefor almost every application,including cables, cable tray,ducting, pipework, trunking,light fittings, conduit andsuspended ceilings.
Custom-built cable supportfor petrochemical projecttanks or towers.
This cable tray system is usuallyinstalled around the outerperimeter of the catwalks andstairs which are mounted onthe tank or vessel.
Designed to special order tomeet specific project needs.
Perforated cable tray Channel tray
Non-metallic cable tray ExpressTrayTM wire frame cable tray
E-Klips spring steel fasteners Large radius cable tray
35
Additional solutions Cable ladder
Thomas & Betts Saudi Arabia, Building 128, Dammam Industrial Area #2, PO Box 514, Al Khobar 31952,Saudi Arabia Tel: +966 (0)3 812 1222 � Email: [email protected] � Web: www.tnb-europe.com
Thomas & Betts offers a broadrange of cable ties designedto make the task of fastening,bundling, clamping andmanaging wires easier for alltypes of commercial, industrialand OEM applications.
Strength and reliability arehallmarks of the Thomas &Betts cable tie range, whichare available in a variety ofstyles under the core brands:Ty-Rap®, Ty-Met®, Ty-Fast®,Ty-Grip® and Deltec® .
Thomas & Betts flexibleconduit provides excellentprotection for electrical cablesagainst aggressive/corrosiveenvironments, moisture andliquids, pressure loads, oil,dust, chemical pollutants andextreme temperatures.
Flexible conduit is availableunder the Thomas & Bettscore brands: Adaptaflex®,Kopex, Kopex-Ex, PMAFIX,PMAFLEX, Shureseal® andShureflex®.
Shrink-Kon® heavy, mediumand thin wall heat shrinkproducts protect cables andconnectors against moisture,corrosion and abrasion.
Additionally providingmechanical and electricalinsulation, Shrink-Kon®products range from highlyflexible to semi-rigid for amultitude of applications inindustry and OEM.
Sta-Kon®, Shield-Kon®,Color-Keyed® and DragonTooth® connectors offersecure, reliable, and highlyconductive termination ofshielded cables, power cablesand magnet wire.
All T&B connectors arecomplemented by manualand hydraulic crimping toolsto enable fast, high qualitycrimps with the minimumof effort.
Cable ties and fasteners
Flexible conduit systems Heat shrink technologies
Terminals and connectors
1/4” 6.35 mm
5/16” 7.94 mm
3/8” 9.53 mm
1/2” 12.7 mm
9/16” 14.29 mm
5/8” 15.9 mm
3/4” 19.05 mm
13/16” 20.64 mm
7/8” 22.23 mm
1” 25.4 mm
1 1/8” 28.58 mm
1 1/4” 31.75 mm
1 7/16” 36.51 mm
1 1/2” 38.1 mm
1 5/8” 41.28 mm
1 11/16” 42.86 mm
1 7/8” 47.63 mm
2” 50.8 mm
2 1/8” 53.98 mm
2 1/4” 57.15 mm
2 1/2” 63.5 mm
2 5/8” 66.68 mm
3” 76.2 mm
3 1/4” 82.55 mm
3 1/2” 88.9 mm
3 5/8” 92.08 mm
4” 101.6 mm
4 1/8” 104.78 mm
4 5/8” 117.48 mm
5” 127 mm
5 3/8” 136.53 mm
6” 152.4 mm
6 11/16” 169.86 mm
7” 177.8 mm
7 1/4” 184.15 mm
8” 203.8 mm
8 1/2” 215.9 mm
9” 228.6 mm
11 1/2” 292.1 mm
12” 304.8 mm
14” 355.6 mm
14 1/2” 368.3 mm
15” 381 mm
16 7/8” 428.63 mm
18” 457.2 mm
18 3/4” 476.25 mm
20” 508 mm
20 1/2” 520.7 mm
21” 533.4 mm
22 1/2” 571.5 mm
24” 609.6 mm
26” 660.4 mm
26 1/2” 673.1 mm
27” 685.8 mm
28 1/8” 714.38 mm
30” 762 mm
32” 812.8 mm
32 1/2” 825.5 mm
33” 838.2 mm
35 5/8” 904.88 mm
36” 914.4 mm
38 1/2” 977.9 mm
41 1/4” 1047.75 mm
46 7/8” 1190.63 mm
48” 1219.2 mm
Imperial to metric conversion chart
inches mm inches mm inches mm inches mm inches mm
All cable ladder measurements in this publication are based on imperial sizes. Please use the following chart for conversions of imperial measurementsto metric as required when assessing cable ladder projects.
K.S.A. PROJECT OFFICE
Thomas & Betts Saudi Arabia
Building 128
Dammam Industrial Area #2
PO Box 514
Al Khobar 31952
Saudi Arabia
Tel +966 (0)3 812 1222
Fax +966 (0)3 812 2981
MIDDLE EAST SALES OFFICE
Thomas & Betts Ltd. Br.
Office 724 6WA West Wing
Dubai Airport Free Zone
PO Box 54567
Dubai
United Arab Emirates
Tel +971 (0)4 609 1635
Fax +971 (0)4 609 1636
www.tnb-europe.com
EUROPEAN HEADQUARTERS
Thomas & Betts
European Centre SA
200 Chaussée de Waterloo
B-1640 Rhode-St-Genèse
Belgium
Tel +32 (0)2 359 8200
Fax +32 (0)2 359 8201
UK OFFICE
Thomas & Betts Limited
Wilford Road
Nottingham
NG2 1EB
United Kingdom
Tel +44 (0)115 964 3700
Fax +44 (0)115 986 0538
The content of this Thomas & Betts catalogue has been carefully checked for accuracy at the time of print. However, Thomas & Bettsdoesn’t give any warranty of any kind, express or implied, in this respect and shall not be liable for any loss or damage that may resultfrom any use or as a consequence of any inaccuracies in or any omissions from the information which it may contain. E&OE.
Copyright Thomas & Betts Corp. 2011. Copyright in these pages is owned by Thomas & Betts except where otherwise indicated. No partof this publication may be reproduced, copied or transmitted in any form or by any means, without our prior written permission. Images,trade marks, brands, designs and technology are also protected by other intellectual property rights and may not be reproduced orappropriated in any manner without written permission of their respective owners. Thomas & Betts reserves the right to change andimprove any product specifications or other mentions in the catalogue at its own discretion and at any time. These conditions of use aregoverned by the laws of the Netherlands and the courts of Amsterdam shall have exclusive jurisdiction in any dispute.
TB-AS-CL-1011