7/29/2019 CH 14; Managing Change
1/9
Page 1 of9
MANAGING CHANGEChapter 14
7/29/2019 CH 14; Managing Change
2/9
Page 2 of9
14. MANAGING CHANGE
(i) What is Change Management ?
(ii) What are the Types of Resistances to Change we find among
employees in Organizational Life ?
(iii) How would you define Unfreezing, Changing and Refreezing
Stages in Change ?
(iv) How the Task of implementing Change is being Carried out ?
7/29/2019 CH 14; Managing Change
3/9
Page 3 of9
What is Change Management ?
Change is any alteration occurring in the work environment that affects the ways in which
employees must act. This change may be planned or unplanned, positive or negative, strong or
week, slow or rapid.
Changeprocess
Change usually involves three overlapping aspects: people, processes and cul-
ture as shown in Figure 1.
CULTURE
PEOPLE PROCESS
Figure 1
Often, the emphasis is upon the processes. However, in order to properly embed a
change, a manager needs to balance all three ofthese aspects.
Change Management is the process, tools and techniques to manage the people-side of change processes, to achieve the
required outcomes, and to realize the change effectively within the individual change agent, the inner team, and the wider
system.
7/29/2019 CH 14; Managing Change
4/9
Page 4 of9
What are the Types of Resistances to Change wefind among employees in Organizational Life ?
Resistance to change:
Most people don't like change because they don't like being changed. When change
comes into view, fear and resistance developed. Resistance to change is the action
taken by individuals and groups when they recognize that the change may threat their
interest. Resistance may be active or passive, overt or covert, individual or organized,
aggressive or timid.
Types of resistance:
Logical, Rational Objections
Time required to adjust Extra effort to relearn
Possibility of less desirable conditions. such as skill downgrading
Economic costs of change
Questioned technical feasibility of change
Psychological, Emotional Attitudes
Fearof the unknown
Low tolerance of change Dislike ofmanagement or otherchange agent
Lack of trust in others
Need forsecurity; desire forstatus quo
Sociological Factors; Group Interests
Political coalitions
Opposing group values
Parochial. narrow outlook
Vested interests
Desire to retain existing friendships
Psychological Resistance This is typically based on emotions, sentiments,and attitudes. Psychological resistance is internally logical from the
perspective of the employees attitudes and feelings about change.
Employees may fear the unknown. mistrust manage- menr's leadership, or feel
that their security and self-esteem are threatened. Even though
7/29/2019 CH 14; Managing Change
5/9
Page 5 of9
management may believe these feelings are not justified, they arc very real 10
employees, and managers must acknowledge, accept, and deal with them.
Sociologicel Resistance Sociological resistance also is logical. when it isseen as a product of a challenge to group interests, norms, and values. Since
social values are powerful forces in the environment, they must be carefully
considered. There are political coalitions,
labor union values, and even different- community values. On a small-group
level, work
friendships and status relationships may be disrupted by changes. Employees
will ask such questions as, "ls the change consistent with group values?" "Does
it maintain teamwork?" Since employees have these kinds of questions on theirminds, managers InUSI try to make these conditions as favorable as possible if
they intend to deal successfully with sociological resistance.
Implications ofResisranee Clearly, all three types of
resistance must be anticipated and treated effectively if employees are to
accept change cooperatively. If managers work with ouly tbe technical,
logical dimension of change, they have failed in their human
responsibilities. Psychological resistance and sociological
resistance are not illogical or irrational; rather, they are logical according to
different sets of values. Recognizing the impact of psychological and
social factors is critically important to the success of proposed change.
7/29/2019 CH 14; Managing Change
6/9
Page 6 of9
How would you define Unfreezing, Changing
and Refreezing Stages in Change ?
Lewins Three-Step Model
Kurt Lewin argued that successful change in organizations should follow three steps: unfreezing the
status quo, movement to a desired end state, and refreezing the new change to make itpermanent.22 (See
Exhibit 18-3.)
unfreezing Changingto overcome thepressures of both individual resistance andgroup conformity.
movement A change process that transforms the organizationfrom the status quo to a desired end state.
refreezing Stabilizinga change intervention by balancing driving andrestraining forces
driving forces Forces that directbehavior away from the status quo.
restraining forces Forces thathinder movement from the existingequilibrium.
Stage 1: Unfreezing
The unfreezing stage is the most crucial step in Lewins process. In this stage,
business managers should convince their subordinates that the changes in the
workplace are beneficial to all parties.
Naturally, subordinates have the tendency to attach themselves entirely to
policies, practices and routines that werent constant in the first place.
Managers point out the flaws and inefficiencies of the current situation. Thus, it
will make the changes more appealing and desirable.
Stage 2: Transition
Transition is in itself the process of change. The stage of transition can be hard
and tedious for both the manager and his subordinates especially if the stageof unfreezing wasnt successful or failed in some aspects.
7/29/2019 CH 14; Managing Change
7/9
Page 7 of9
In Lewis three step change model, the stage of transition is when the
subordinates start to accept the changes. Subordinates identify the practices,
the policies and the overall norm brought by the changes in the workplace.
Stage 3: Refreezing
The final stage in Lewins three stage change model is the stage of refreezing.
In this stage, subordinates start to fully accept the changes in the workplace.
Stability is the main concern under the stage of refreezing.
Managers should stabilize the situation and create a different, change-oriented
atmosphere. It is the stage where subordinates start to reconnect themselves
with the workplace including the changes it parades.
7/29/2019 CH 14; Managing Change
8/9
Page 8 of9
How the Task Of Implementing Change is beingCarried out ?
Problem of overcoming resistance to change can be handled at two levels:-
1. At the individual level.
2. At the group level through group dynamics.
1. Efforts at the Individual Level
The management can use the following strategies to overcome resistance by the people and to introduce changes
successfully:
Participation and Involvement: Individual will find it difficult to resist the change which they participated. Prior to making a change,
all those persons who are going to the affected by the change, can be brought into the decision making process. Their doubts and
objectives should be removed to win their cooperation. Getting opinions out in the open, so that they are looked at and evaluated is an
important trust building task. This involvement of the workers can overcome resistance, obtain personal commitment and increase the
quality of the change decisions. But this method may lead to a lot of time consumption as well as it may be a potential for poor solutions.
Effective Communication: Inaccurate information can be a reason for the resistance to change. An appropriate communication program
can help in overcoming this resistance. Workers can give necessary education about the change, its process and its working through
training class, meeting and conferences. The reasons about change must be communicated very clearly and without ambiguity.
Communication can help dissipate some fear of unknown elements. Management should also see that there is a two way communication
between the management and workers so that the so former comes to know about the reactions of the latter directly without delay. All
this will help persuade employees about the necessity of change and once persuaded they may actively want to have the change.
Facilitation and support: Change agents can offer facilitation and supportive efforts to overcome resistance. Facilitative support means
removing physical barriers in implementing change by providing appropriate training, tools, machinery etc. Supportive efforts include
listening, providing guidance, allowing time off after a difficult period and providing emotional support. Emotional support is provided
by showing personal concern to the employees during periods of stress and strain. The drawback of this method is that it is time
consuming and expensive and its implementation offers no assurance of success.
Leadership: Leadership plays an important role in overcoming resistance to change. A capable leader can reinforce a climate of
psychological support for change. Greater the prestige and credibility of the person who is acting as a change agent, the greater will be
the influence upon the employees who are involved in the change process. A strong and effective leader can exert emotional pressure on
his subordinates to bring about the desired change. Most of the times, there is no resistance from the subordinates and if they resist, the
leader tries to overcome resistance by leadership process.
Negotiation and Agreement: Negotiation and Agreement technique is used when costs and benefits must be balanced for the benefit of
all concerned parties. If people or groups are losing something significant in the change and if they have enough power to resist strongly.
Negotiation before implementation can make the change go much more smoothly, even if at the later stages if some problems arise, the
negotiated agreement can be referred to.
Manipulation and Co-optation: This method is used in the situation, where other methods are not working or are not available.
Managers can resort to manipulation of information, resources and favors to overcome resistance. Or they can resort to co-optation
which means to co-opt an individual, perhaps a key person with in a group, by giving him a desirable role in designing or carrying out
the change process. This technique has some doubtful ethics and it may also backfire in some cases.
Coercion: Managers may resort to coercion if all other methods fail or for some reason are inappropriate. Coercion may be in form of
explicit or implicit threats involving loss of jobs, lack of promotion and the like. Managers sometimes dismiss or transfer employees who
stand in the way of change. Coercion can seriously affect employees attitudes and have adverse consequences in the long run.
7/29/2019 CH 14; Managing Change
9/9
Page 9 of9
Timing of Change: Timing of introduction of change can have a considerable impact on the resistance. The right time will meet less
resistance. Therefore, management must be very careful in choosing the time when the organizational climate is highly favorable to
change. An example of right time is immediately after a major improvement in working conditions.
2. Efforts at the Group Level
A group is a cluster of persons related in some way by common interests over a period of time. Members of the group
interact with each other and develop group cohesiveness among themselves. That is why although change can be obtained
individually; it is more meaningful if it is done through group. Therefore, management should consider the group and not the
individual as the basic unit of change. Group dynamics offer some basic help in the regard.
Darwin Cartwright has identified the following characteristics of group as a means of overcoming resistance to change:
If both the change agent and the people target for change belong to the same group, the role of group is more effective.
If the people have more cohesiveness and strong belonging to the group, change is easier to achieve.
The more attractive the group is to the numbers, the greater is the influence of the group to accept or resist a change.
Group can exert pressure on those factors of the members which are responsible for the group being attractive to the members. Normally
attitudes, values and behaviour are more common factors determining the group attractiveness.
The degree of prestige of a group, as interpreted by the members will determine the degree of influence the group has over its members.
If any attempt is made to change any individual or some individuals who deviates the group norms there is likelihood of the change
attempt being resisted by the group.
Thus, the management should consider the group as the basic unit of change. Group interactions should be encouraged; it
should be provided full information by the management. The management should also explain the rationale of change and
try to convince that the interests of the group members would not be adversely affected. Group dynamics also help in
providing various training programmers for accepting and implementing change.