CH 14; Managing Change

7/29/2019 CH 14; Managing Change

1/9

Page 1 of9

MANAGING CHANGEChapter 14


2/9

Page 2 of9

14. MANAGING CHANGE

(i) What is Change Management ?

(ii) What are the Types of Resistances to Change we find among

employees in Organizational Life ?

(iii) How would you define Unfreezing, Changing and Refreezing

Stages in Change ?

(iv) How the Task of implementing Change is being Carried out ?


3/9

Page 3 of9

What is Change Management ?

Change is any alteration occurring in the work environment that affects the ways in which

employees must act. This change may be planned or unplanned, positive or negative, strong or

week, slow or rapid.

Changeprocess

Change usually involves three overlapping aspects: people, processes and cul-

ture as shown in Figure 1.

CULTURE

PEOPLE PROCESS

Figure 1

Often, the emphasis is upon the processes. However, in order to properly embed a

change, a manager needs to balance all three ofthese aspects.

Change Management is the process, tools and techniques to manage the people-side of change processes, to achieve the

required outcomes, and to realize the change effectively within the individual change agent, the inner team, and the wider

system.


4/9

Page 4 of9

What are the Types of Resistances to Change wefind among employees in Organizational Life ?

Resistance to change:

Most people don't like change because they don't like being changed. When change

comes into view, fear and resistance developed. Resistance to change is the action

taken by individuals and groups when they recognize that the change may threat their

interest. Resistance may be active or passive, overt or covert, individual or organized,

aggressive or timid.

Types of resistance:

Logical, Rational Objections

Time required to adjust Extra effort to relearn

Possibility of less desirable conditions. such as skill downgrading

Economic costs of change

Questioned technical feasibility of change

Psychological, Emotional Attitudes

Fearof the unknown

Low tolerance of change Dislike ofmanagement or otherchange agent

Lack of trust in others

Need forsecurity; desire forstatus quo

Sociological Factors; Group Interests

Political coalitions

Opposing group values

Parochial. narrow outlook

Vested interests

Desire to retain existing friendships

Psychological Resistance This is typically based on emotions, sentiments,and attitudes. Psychological resistance is internally logical from the

perspective of the employees attitudes and feelings about change.

Employees may fear the unknown. mistrust manage- menr's leadership, or feel

that their security and self-esteem are threatened. Even though


5/9

Page 5 of9

management may believe these feelings are not justified, they arc very real 10

employees, and managers must acknowledge, accept, and deal with them.

Sociologicel Resistance Sociological resistance also is logical. when it isseen as a product of a challenge to group interests, norms, and values. Since

social values are powerful forces in the environment, they must be carefully

considered. There are political coalitions,

labor union values, and even different- community values. On a small-group

level, work

friendships and status relationships may be disrupted by changes. Employees

will ask such questions as, "ls the change consistent with group values?" "Does

it maintain teamwork?" Since employees have these kinds of questions on theirminds, managers InUSI try to make these conditions as favorable as possible if

they intend to deal successfully with sociological resistance.

Implications ofResisranee Clearly, all three types of

resistance must be anticipated and treated effectively if employees are to

accept change cooperatively. If managers work with ouly tbe technical,

logical dimension of change, they have failed in their human

responsibilities. Psychological resistance and sociological

resistance are not illogical or irrational; rather, they are logical according to

different sets of values. Recognizing the impact of psychological and

social factors is critically important to the success of proposed change.


6/9

Page 6 of9

How would you define Unfreezing, Changing

and Refreezing Stages in Change ?

Lewins Three-Step Model

Kurt Lewin argued that successful change in organizations should follow three steps: unfreezing the

status quo, movement to a desired end state, and refreezing the new change to make itpermanent.22 (See

Exhibit 18-3.)

unfreezing Changingto overcome thepressures of both individual resistance andgroup conformity.

movement A change process that transforms the organizationfrom the status quo to a desired end state.

refreezing Stabilizinga change intervention by balancing driving andrestraining forces

driving forces Forces that directbehavior away from the status quo.

restraining forces Forces thathinder movement from the existingequilibrium.

Stage 1: Unfreezing

The unfreezing stage is the most crucial step in Lewins process. In this stage,

business managers should convince their subordinates that the changes in the

workplace are beneficial to all parties.

Naturally, subordinates have the tendency to attach themselves entirely to

policies, practices and routines that werent constant in the first place.

Managers point out the flaws and inefficiencies of the current situation. Thus, it

will make the changes more appealing and desirable.

Stage 2: Transition

Transition is in itself the process of change. The stage of transition can be hard

and tedious for both the manager and his subordinates especially if the stageof unfreezing wasnt successful or failed in some aspects.


7/9

Page 7 of9

In Lewis three step change model, the stage of transition is when the

subordinates start to accept the changes. Subordinates identify the practices,

the policies and the overall norm brought by the changes in the workplace.

Stage 3: Refreezing

The final stage in Lewins three stage change model is the stage of refreezing.

In this stage, subordinates start to fully accept the changes in the workplace.

Stability is the main concern under the stage of refreezing.

Managers should stabilize the situation and create a different, change-oriented

atmosphere. It is the stage where subordinates start to reconnect themselves

with the workplace including the changes it parades.


8/9

Page 8 of9

How the Task Of Implementing Change is beingCarried out ?

Problem of overcoming resistance to change can be handled at two levels:-

1. At the individual level.

2. At the group level through group dynamics.

1. Efforts at the Individual Level

The management can use the following strategies to overcome resistance by the people and to introduce changes

successfully:

Participation and Involvement: Individual will find it difficult to resist the change which they participated. Prior to making a change,

all those persons who are going to the affected by the change, can be brought into the decision making process. Their doubts and

objectives should be removed to win their cooperation. Getting opinions out in the open, so that they are looked at and evaluated is an

important trust building task. This involvement of the workers can overcome resistance, obtain personal commitment and increase the

quality of the change decisions. But this method may lead to a lot of time consumption as well as it may be a potential for poor solutions.

Effective Communication: Inaccurate information can be a reason for the resistance to change. An appropriate communication program

can help in overcoming this resistance. Workers can give necessary education about the change, its process and its working through

training class, meeting and conferences. The reasons about change must be communicated very clearly and without ambiguity.

Communication can help dissipate some fear of unknown elements. Management should also see that there is a two way communication

between the management and workers so that the so former comes to know about the reactions of the latter directly without delay. All

this will help persuade employees about the necessity of change and once persuaded they may actively want to have the change.

Facilitation and support: Change agents can offer facilitation and supportive efforts to overcome resistance. Facilitative support means

removing physical barriers in implementing change by providing appropriate training, tools, machinery etc. Supportive efforts include

listening, providing guidance, allowing time off after a difficult period and providing emotional support. Emotional support is provided

by showing personal concern to the employees during periods of stress and strain. The drawback of this method is that it is time

consuming and expensive and its implementation offers no assurance of success.

Leadership: Leadership plays an important role in overcoming resistance to change. A capable leader can reinforce a climate of

psychological support for change. Greater the prestige and credibility of the person who is acting as a change agent, the greater will be

the influence upon the employees who are involved in the change process. A strong and effective leader can exert emotional pressure on

his subordinates to bring about the desired change. Most of the times, there is no resistance from the subordinates and if they resist, the

leader tries to overcome resistance by leadership process.

Negotiation and Agreement: Negotiation and Agreement technique is used when costs and benefits must be balanced for the benefit of

all concerned parties. If people or groups are losing something significant in the change and if they have enough power to resist strongly.

Negotiation before implementation can make the change go much more smoothly, even if at the later stages if some problems arise, the

negotiated agreement can be referred to.

Manipulation and Co-optation: This method is used in the situation, where other methods are not working or are not available.

Managers can resort to manipulation of information, resources and favors to overcome resistance. Or they can resort to co-optation

which means to co-opt an individual, perhaps a key person with in a group, by giving him a desirable role in designing or carrying out

the change process. This technique has some doubtful ethics and it may also backfire in some cases.

Coercion: Managers may resort to coercion if all other methods fail or for some reason are inappropriate. Coercion may be in form of

explicit or implicit threats involving loss of jobs, lack of promotion and the like. Managers sometimes dismiss or transfer employees who

stand in the way of change. Coercion can seriously affect employees attitudes and have adverse consequences in the long run.


9/9

Page 9 of9

Timing of Change: Timing of introduction of change can have a considerable impact on the resistance. The right time will meet less

resistance. Therefore, management must be very careful in choosing the time when the organizational climate is highly favorable to

change. An example of right time is immediately after a major improvement in working conditions.

2. Efforts at the Group Level

A group is a cluster of persons related in some way by common interests over a period of time. Members of the group

interact with each other and develop group cohesiveness among themselves. That is why although change can be obtained

individually; it is more meaningful if it is done through group. Therefore, management should consider the group and not the

individual as the basic unit of change. Group dynamics offer some basic help in the regard.

Darwin Cartwright has identified the following characteristics of group as a means of overcoming resistance to change:

If both the change agent and the people target for change belong to the same group, the role of group is more effective.

If the people have more cohesiveness and strong belonging to the group, change is easier to achieve.

The more attractive the group is to the numbers, the greater is the influence of the group to accept or resist a change.

Group can exert pressure on those factors of the members which are responsible for the group being attractive to the members. Normally

attitudes, values and behaviour are more common factors determining the group attractiveness.

The degree of prestige of a group, as interpreted by the members will determine the degree of influence the group has over its members.

If any attempt is made to change any individual or some individuals who deviates the group norms there is likelihood of the change

attempt being resisted by the group.

Thus, the management should consider the group as the basic unit of change. Group interactions should be encouraged; it

should be provided full information by the management. The management should also explain the rationale of change and

try to convince that the interests of the group members would not be adversely affected. Group dynamics also help in

providing various training programmers for accepting and implementing change.

Documents

CH 14; Managing Change