7/27/2019 PBREP
1/20
SSA Warehouse Management 4000
Paper-based ReplenishmentUser Guide
7/27/2019 PBREP
2/20
Copyright 2005 by SSA Global Technologies, Inc.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in anyway or by any means, including, without limitation, photocopying or recording, without the prior written consent ofSSA Global Technologies, Inc.
Important Notices
The material contained in this publication (including any supplementary information) constitutes and containsconfidential and proprietary information of SSA Global Technologies, Inc.
By gaining access to the attached, you acknowledge and agree that the material (including any modification,translation or adaptation of the material) and all copyright, trade secrets and all other right, title and interest therein,are the sole property of SSA Global Technologies, Inc., and that you shall not gain right, title or interest in the material(including any modification, translation or adaptation of the material) by virtue of your review thereof other than thenon-exclusive right to use the material solely in connection with and the furtherance of your license and use ofsoftware made available to your company from SSA Global Technologies, Inc., pursuant to a separate agreement(Purpose).
In addition, by accessing the enclosed material, you acknowledge and agree that you are required to maintain such
material in strict confidence and that your use of such material is limited to the Purpose described above.
Although SSA Global Technologies, Inc., has taken due care to ensure that the material included in this publication isaccurate and complete, SSA Global Technologies, Inc., cannot warrant that the information contained in thispublication is complete, does not contain typographical or other errors, or will meet your specific requirements. Assuch, SSA Global Technologies, Inc., does not assume and hereby disclaims all liability, consequential or otherwise,for any loss or damage to any person or entity which is caused by or relates to errors or omissions in this publication(including any supplementary information), whether such errors or omissions result from negligence, accident or anyother cause.
Trademark Acknowledgements
SSA WAREHOUSE MANAGEMENT 4000 is a Registered Trademark of SSA Global Technologies, Inc., in theUnited States and/or other countries.
All other company, product, trade or service names referenced may be registered trademarks or trademarks of theirrespective owners.
Publication Information
Release: SSA
Warehouse Management 4000 Version 3.10
Publication Date: J uly 2005
7/27/2019 PBREP
3/20
Table of Contents
Chapter 1 Overview........................................................................................................................1-1Paper-based Replenishment Process........................................................................................1-2Changes Summary ....................................................................................................................1-3Paper-based Replenishment Usage..........................................................................................1-4Rules..........................................................................................................................................1-5
Chapter 2 Paper-based Replenishment Tasks ............................................................................2-1Selecting Paper-based Replenishment Tasks ...........................................................................2-2Printing Paper-based Replenishment Tasks .............................................................................. 2-4Confirming Paper-based Replenishment Tasks.........................................................................2-5Adjusting Paper-based Replenishment Tasks ...........................................................................2-8Deleting Paper-based Replenishment Tasks ............................................................................. 2-9
7/27/2019 PBREP
4/20
ii | Table of Contents
7/27/2019 PBREP
5/20
1
Chapter 1Overview
The topics in this section provide an overview of the Paper-based
Replenishment functionality that has been introduced with the 3.9 release ofthe SSA Warehouse Management 4000 application.
The chapter consists of the following topics:
Topic Page
Paper-based Replenishment Process 1-2Changes Summary 1-3Paper-based Replenishment Usage 1-4Rules 1-5
7/27/2019 PBREP
6/20
1-2 | Chapter 1 Overview
Paper-based Replenishment Process
Prior to the release of the current SSA Warehouse Management 4000application, it did not have a base Paper-based Replenishment option.
The ability to generate and maintain replenishment tasks from the SSAWarehouse management 4000 application without using Radio Frequency(RF) devices now provides an improved level of visibility and control.
Modifications have been made to the SSA Warehouse Management 4000application to address this change.
7/27/2019 PBREP
7/20
Changes Summary | 1-3
Changes Summary
A new option has been added to the Warehouse Inventory menucalled Replenishment (at the Warehouse level only, not the enterpriselevel).
Create two new options have been added to the WarehouseInventory Replenishment menu:
Generate Replenishment Task
Maintain Replenishment Task
A new selection parameter screen has been created from whichreplenishments can be selected, and then generated (to a temp table).
This includes selection by:
Storer Zone
Commodities
Pick Ranges
Priorities
Number of Tasks
UOM/Pallet or ALL
Once the tasks are selected, a GENERATE button initiates the creationof Replenishment tasks based on the selected criteria.
Add two new system numbers into the System AdministrationConfigure Serverconfiguration:
REPLENISHGROUP
REPLENISHKEY
A new Replenishment report has been created that displays the results ofthe selected and generated replenishments. (This report can be printed.)
This report is given to a warehouse associate to physically complete theinventory movements and replenishments, and then return it to theReplenishment supervisor.
A new SSA Warehouse Management 4000 application Maintain
screen has been created within the Maintain Replenishment Task Optionform, from which the user can Delete, Confirm, and ReprintReplenishment Tasks (in the replenishment temp table).
Replenishment quantities can now be adjusted based on the actualreplenishment amount (within the confirm replenishment function).
Inventory tasks can now be adjusted based on confirmed replenishmentupdates.
7/27/2019 PBREP
8/20
1-4 | Chapter 1 Overview
Paper-based Replenishment Usage
Common uses for paper-based replenishment include:
Small operations with limited RF, forks or replenishment volumes
Replenishments from a specific zone (high rise, freezer, security areas)into a pick area
Remote satellite replenishments into a pick area
Bulk or Batch replenishments of a specific group of products into a pickarea
Replenishment of dangerous goods or ugly products requiring manuallabor or specialist equipment
Overnight or change of shift replenishment of low priority stock into picklocations
Piece pick of high priority items to pick face
Any other special or ad hoc replenishment tasks not normally associatedwith RF replenishments.
7/27/2019 PBREP
9/20
Rules | 1-5
Rules
The following rules apply when you use the Paper-based Replenishmentfunctionality.
Paper-based Replenishments are managed at the Warehouse level, notat the enterprise level.
Replenishments are not complete in the system until you click theCONFIRM button on the Maintain Replenishment screen.
Clicking the CONFIRM button instructs the system to logically move thereplenishments (as detailed) from the From location to the To location.
The logical WMS system and the physical warehouse are now in sync.
7/27/2019 PBREP
10/20
1-6 | Chapter 1 Overview
7/27/2019 PBREP
11/20
2
Chapter 2Paper-based Replenishment Tasks
The following sections identify the step-by-step process for managing Paper-
based Replenishment within the SSA Warehouse Management 4000application.
The chapter consists of the following topics:
Topic Page
Selecting Paper-based Replenishment Tasks 2-2Printing Paper-based Replenishment Tasks 2-4Confirming Paper-based Replenishment Tasks 2-5Adjusting Paper-based Replenishment Tasks 2-8Deleting Paper-based Replenishment Tasks 2-9
7/27/2019 PBREP
12/20
2-2 | Paper-based Replenishment Tasks
Selecting Paper-based Replenishment Tasks
1 From the SSA Warehouse Management 4000 Navigation Menu, selectGenerate Replenishment Task.
Figure 2-1: SSA Warehouse Management 4000 Navigation Menu
7/27/2019 PBREP
13/20
Selecting Paper-based Replenishment Tasks | 2-3
2 After you click Generate Replenishment Task theEnter Parameters forReplenishment screen displays.
Figure 2-2: Enter Parameters for Replenishment
Note: Item 11 allows you to choose the number of replenishment tasks youwant to retrieve. The default is ALL (0=ALL).
3 Click Cancel orGenerate.
Cancel returns control to the previous menu screen.
Generate returns a completed message (shown below).
Figure 2-3: Generate Replenishment Completed Message
4 If you selected Generate, click OK. The replenishment report is generated.
The Replenishment report is a preview screen from which you can print thereport (refer to Printing Paper-based Replenishment Tasks for a sample ofthis report).
7/27/2019 PBREP
14/20
2-4 | Paper-based Replenishment Tasks
Printing Paper-based Replenishment Tasks
The following is a sample of a Paper-based Replenishment Report.
Figure 2-4: Paper-based Replenishment Report
To Print the report, right-mouse click on the report. The print option displays,as shown below.
Figure 2-5: Paper-based Replenishment Report Print Option
Once the report is printed, it can be given to a replenishment associate in thewarehouse who will physically move stock from the From location to the Tolocation.
Any quantity discrepancies or moves that have not been completed can benoted in the side margins of the report, and returned to the replenishmentsupervisor.
7/27/2019 PBREP
15/20
Confirming Paper-based Replenishment Tasks | 2-5
Confirming Paper-based Replenishment Tasks
When the completed replenishment report is received, the Replenishmentsupervisor must CONFIRM the Replenishment tasks in the system so thatthe SSA Warehouse Management 4000 application can logically completethe inventory moves.
1 On the SSA Warehouse Management 4000 Navigation Menu, clickMaintain Replenishment located within the InventoryReplenishment menu.
Figure 2-6: SSA Warehouse Management 4000 Navigation Menu
7/27/2019 PBREP
16/20
2-6 | Paper-based Replenishment Tasks
2 When the Search tab displays, type the Replenishment tasks selectioncriteria.
Figure 2-7: Maintain Replenishment
The List tab displays the list of Replenishment tasks you requested.
Figure 2-8: Replenishment Task List tab
7/27/2019 PBREP
17/20
Confirming Paper-based Replenishment Tasks | 2-7
5 Prior to CONFIRMATION, the Replenishment supervisor can:
Adjust replenishment quantities
Delete replenishment tasks
Cancel out of the current function.a To select all Replenishment tasks for confirmation, click the Check All
check box on the List view tab. The system automatically checks theboxes for all listed Replenishments (as displayed in the List tab).
b To select individual Replenishment tasks, click the check box next toeach task, and click Confirm. A replenishment confirmation dialog boxdisplays.
Figure 2-9: Replenishment Confirmation Message
6 To Confirm the Replenishments and commit the replenishment updates into
the WMS system, clickYes.
Note: You cannot undo confirmed replenishments.
Figure 2-10: Confirmed Replenishment Completed Message
7/27/2019 PBREP
18/20
2-8 | Paper-based Replenishment Tasks
Adjusting Paper-based Replenishment Tasks
Replenishment task quantities can be adjusted priorto CONFIRMATION.
1 On the SSA Warehouse Management 4000 Navigation Menu, clickMaintain Replenishment located within the Inventory Replenishmentmenu.
2 Type the selection criteria range that returns the standard Query, List, orForm Tab.
Once the tasks display, you can:
Select the candidate replenishment tasks by clicking the check boxnext to each task
Adjust the actual quantity on each task.
3 Click Confirm.
Figure 2-11: Candidate Replenishment Tasks
7/27/2019 PBREP
19/20
Deleting Paper-based Replenishment Tasks | 2-9
Deleting Paper-based Replenishment Tasks
Replenishment task quantities can be deleted by performing the followingsteps.
1 On the SSA Warehouse Management 4000 Navigation Menu, clickMaintain Replenishment located within the Inventory Replenishmentmenu.
2 Type the selection criteria range that returns the standard Query, List, orForm Tab.
Figure 2-12: Candidate Replenishment Task List
7/27/2019 PBREP
20/20
2-10 | Paper-based Replenishment Tasks
Once the tasks display, you can select the candidate replenishment tasks byclicking the check box next to each task.
3 Click Delete. A deletion confirmation dialog box displays.
Figure 2-13: Delete Replenishment Confirmation Message
4 To delete the replenishments, clickYes. A deletion confirmation messagedisplays.
Figure 2-14: Replenishment Tasks Deleted Message
Recommended