Upload
avi1001
View
1.907
Download
4
Embed Size (px)
Citation preview
- AVINASH MISHRA
SINGLE PHASE SEMICONVERTER
(R-L LOAD)
INTRODUCTIONConverter
Rectifier circuit
Uncontrolled Rectifier circuit
Controlled Rectifier circuit
CLASSIFICATION OF RECTIFIERS
SEMI CONVERTERIt is a single quadrant converter.It has only one polarity of output
voltage and current.Here two SCRs and two diodes are
connected in bridge configuration. They can be arranged in two confg.
namely symmetrically & asymmetrical.
Symmetrical configuration of semiconverter
Asymmetrical configuration of semiconverter
OPERATION WITH R-L LOAD
MODE 1
Here when SCR 1 is turned on.
OBSERVATION OF MODE 1 Diode d1 is forward biased, Conduction will take place
through SCR1 & D1, Load voltage is Vo=Vm sin ωt Here inductive load will store the
energy in this mode of operation. Flow of power is from source to
load.
MODE 2
Here at freewheeling occurs.
OBSERVATION OF MODE 2 Here AC vltg goes to zero & after ∏ it
becomes negative. Hence SCR 1 and diode D1 will turn off. Since load is inductive it will try to
oppose the change in crt. Flowing through it.
Self induced vltg is induced. This load vltg is negative. Hence diode Dfw starts conducting due
to freewheeling.
MODE 3 Here at SCR 2 & D 2
is ON.
OBSERVATION OF MODE 3
Load vltg is positive = instantaneous vltg.
Supply crt is negative. Hence load vltg & crt both being negative it will store energy.
MODE 4
Here at freewheeling occurs.
OBSERVATION OF MODE 4
Here AC supply vltg reverses its polarity & becomes positive.
Here also hence freewheeling starts through Dfw.
Load vltg is zero. Supply crt is zero.
SUMMARY