05/02/2023

THE FUTURE OF TUBE AND PIPE CONNECTIONS

Introduction:

What can Lokring Technology do for me ?

NO HOT WORK / NO FIRE WATCH! Reduce down time ! Create a safer work environment ! Make repairs in minutes instead of hours ! Provide solutions for difficult applications ! Optimize your welders production output ! Decrease rework on critical joints ! Allow repairs on off shifts-weekends/holidays ! Cut maintenance costs !

“An all metal, patented, permanent, axially swaged fitting that is equal to a welded joint.”

LOKRING Fitting SystemIncreases Productivity

No hot work permits or fire watch required. Repairs can be made with internal trades. Can field run pipe anywhere anytime. Approved for class on div.one areas. Piping can be installed in wet environment. Minimal pipe preparation. NDT is visual only No X-ray.

Improves labor productivity (mh/ft.) by up to 70%

LOKRING Fitting SystemImproves Job Site Scheduling

Meet or beat schedules.

Optimize manpower resources.

Permits trades stacking.

Create a safer work environment.

Increased reliability.

15V24 Micro-alloyed Carbon Steel product

A. NPS pipe sizes 1/4” NPS – 4” NPS

B. Matching Pipe Specifications ASTM A106 (Seamless)ASTM A53 (Seamless & ERW)ASTM 587 (ERW)

C. Pipe Schedules Schedules 40/80 for 1/4” - 4” and 40/80/160 for 1/2”, 3/4” &

1”

D. Governing Specifications B31.1 (Power Piping and Utilities)

B31.3 (Refinery/Chemical)

E. Operating Temperatures 650°F Maximum

F. Operating Pressure Matching pipe per B31.1/B31.3

316L Stainless Steel ProductA. NPS pipe sizes 1/4” NPS – 3” NPS

B. Matching Pipe Specifications ASTM A312 SS Pipe (Seamless) ASTM A312 SS Pipe (ERW)ASTM A106, ASTM A53 (CS

pipe)

C. Pipe Schedules Schedules 10/40/80 for 1/4” – 3”

D. Governing Specifications B31.1 (Power Piping and Utilities)

B31.3 (Refinery/Chemical)B31.4 /B31.5/B31.8

E. Operating Temperatures -150F/800F (-101/425C)

F. Operating Pressure Matching pipe per B31.1/B31.3

Stainless Steel Tube Products

A. OD tube sizes 1/4” – 2 1/2”

B. Matching Tube Specifications 316L S.S. Meets ASTM A269 and A213

C. Tubing Wall .035 - .120

D. Governing Specifications ONLY Tube fitting that meets ANSI / ASME B31

standards

E. Operating Temperatures Max Temp- 750 degrees F.

F. Operating Pressure 4:1 safety factor on tubing operating pressure

333 AISI/SAE 4130 NACECarbon Steel Product

A. NPS pipe sizes 1/2:” NPS – 4” NPS

B. Matching Pipe Specifications ASTM A333 Gr 6ASTM A106,API 5L& A53 Grades B

C. Pipe Schedules Schedules 40/80/160 for 1/2 – 2” Schedules 40/80 for 3”-4”

D. Governing Specifications B31.1 (Power Piping and Utilities)

B31.3 (Refinery/Chemical)

E. Operating Temperatures -50F/800FF. Operating Pressure Matching pipe per B31.1/B31.3

Technical Approvals and Standards ISO 9001:2008 Lloyd's Register #9800070 Canadian Registration Number (CRN) • OA1195 British Ministry of Defence American Petroleum Institute - API-607 Rev 4 Fire Test ASTM-F1387 NAVSEA ANSI/ASME B31.1 B31.3 B31.5 Association of American Railroads (AAR) United States Coast Guard American Bureau of Shipping (ABS) National Fire Protection Association, standard for health care facilities (NFPA 99) California Air Resources Board (CARB)

• Copies available upon request

T E C H N O L O G Y C O R P O R A T I O N

T E C H N O L O G Y C O R P O R A T I O N

T E C H N O L O G Y C O R P O R A T I O N

T E C H N O L O G Y C O R P O R A T I O N

T E C H N O L O G Y C O R P O R A T I O N

T E C H N O L O G Y C O R P O R A T I O N

Thank you for taking time out from your busy schedule

Steve Burke Exclusive Distributor

219- 707-5956