View
223
Download
4
Category
Preview:
Citation preview
Intermech Sealing Solutions (Pty) Ltd Reg. No 1997/02751/07 63 Van Der Dool Road P O Box 11408 Nuffield, Springs Selcourt, Springs Gauteng, South Africa Gauteng, South Africa, 1567 +27-11-818-2372 Email: clinton@intermech.net +27-11-363-2989 Internet: www.intermech.net
Directors: John Fleming, Johan Hefers
Intermech Sealing Solutions (Pty) Ltd was established in early 1997, supplying fluid sealing and engineered products for both static and rotating applications. Based in Springs Gauteng, products are produced for distribution in South Africa and for international export. Enhancing the locally produced products, the company has secured sole agency privileges from large internationally recognized companies for representation in the Southern African region.
Company management assumes a continuous product improvement and expansion attitude. We offer the following products in standard as stocked items or as special order manufacture:
FLUID SEALING
Range of gland packing styles, offering various braiding configurations and fibres, to specific requests.
Slade™ Gland Packing: unique 99% graphite product offering leak‐free and flush‐less pump operation, and independently tested emission control benefits in valve installations
offers exceptional performance in high temperature and pressure services
Corrugated metal technology providing the tightest sealing gasket at the lowest bolt load as tested and verified by independent test facilities.
Graftec™ Gasket: comprising a 316SS metal core encapsulated with expanded graphite for use in high temperature and pressure as well as general service applications
Teftec Gasket: comprising a 316 SS metal corrugated gasket laminated with expanded PTFE for use in high oxidising applications
Auxiliary Products:
Mechanical Seals – imported stocks coupled to specific customer demands
Packing Extractors ‐ highly efficient extraction tool; long flexible shank to gain access to glands in difficult positions and replaceable screw‐end
INDUSTRIAL MANUFACTURING
Reconditioning: a fully equipped workshop enables us to comprehensively refurbish most makes of centrifugal pumping equipment, industrial gearboxes and mechanical seals
Engineering: qualified technical staff to attend to the specific needs of customers in manufacturing specialised parts and equipment
PIPELINE COMPENSATORS Products that effectively control vibration and expansion, and provide a misalignment solution in pipelines Rubber Bellow: imported range of rubber bellows designed to suit a variety of applications by careful
selection of rubber material, installation length and flange style PTFE: machined convoluted reinforced‐PTFE machined to customer specific dimensions ANTI VIBRATION DEVICES Range of products designed for effective isolation of vibration produced by mechanical equipment Machinery Mounting Pad: simple, low cost solution used to isolate high‐speed mechanical equipment RD Isolation Mounts: effective, low cost solution designed to isolate high‐speed mechanical equipment Spring Vibration Isolator: for control of disturbing frequencies below 16 hertz, offering high isolation efficiency FLS Vibration Isolator: combination of products used in heavy equipment applications Vibration Isolation Hangers: isolate vibration from suspended equipment, or piping and ductwork coupled to mechanical equipment Circular Mounts: inexpensive standard elements for elastic bearing of light and medium weight equipment
Single Sphere Rubber
Bellow with Floating
Flange
Twin Sphere Connectors
with Union Threads
Twin Sphere Rubber
Bellow with Floating
Flange
PTFE Convuluted Bellow
Spring Hangers
Type SH
Free Standing Spring
Vibration Isolator
Spring Isolation Mounts
Type FLSVibration Isolation Pads
RD Anti Vibration Mounts T Grommets
Circular Mounts
Intermech Sealing Solutions (Pty) Ltd63 Van Den Dool Rd, Nuffield, Springs, Gauteng // PO Box 11408, Selcourt, Springs, Gauteng
Tel: +27 11 818 2372 // Fax: +27 11 363 2989www.intermech.net // info@fluidseal.co.za
RD Anti-Vibration MountsFeatures :
Typical Applications :
Installation:
Electrical transformers
Mobile equipment
of the mounting.
Packaged air conditioning equipment
Designed to carry the load over the full surface of the top face.
The tapped centre hole must only be used for bolting equipment to the mounting
and not be used as a jacking point for levelling.
If levelling is necessary this should be done with shims that cover the full top surface
Isolation of mechanical plant and machinery
Construction of floating studio floors
Pumps & fans
Mountings are furnished with a tapped
hole in the centre. This enables the
equipment to be bolted securely to
the mounting.
Mountings may be used without
bolting under machines having no
lateral or severe vertical motion.
Use set screw threaded up from
under side. 'h' must exceed
maximum mounting deflection.
If Bolt is InaccessibleNo Bolting RequiredIf Bolting Is Preferred
Neoprene based 'turret mount'
Incorporating a pre-drilled steel base and a tapped steel insert in the head of the mount
Colour coded load range for ease of identification
h
A L H W S
mm mm mm mm mm
RDA-S45-YEL YELLOW 23 10 45 32 83 38 47 60 R 46.00
RDA-S55-BLU BLUE 57 10 55 32 83 38 47 60 R 46.00
RDB-M45-YEL YELLOW 54 13 45 44 100 45 63 76 R 51.00
RDB-M55-BLU BLUE 100 13 55 44 100 45 63 76R 51.00
RDB-M65-WHI WHITE 170 13 65 44 100 45 63 76R 51.00
RDC-L45-YEL YELLOW 113 13 45 65 143 63 105 103R 76.00
RDC-L55-BLU BLUE 272 13 55 65 143 63 105 103R 76.00
RDC-L65-WHI WHITE 499 13 65 65 143 63 105 103
R 76.00
Price
Excluding
VAT
DurometerStock CodeRated
Capacity Kg
Maximum Rated
Deflection mmColour Mark
Dimensions
H
A
6
L
S
w
T2
T1
Corrosion resistant - metal components encapsulated with rubber
Each model is available in a range of grades to suit various weight loadings
Non skid ribbed based
Designed to give high mechanical strength
Vibration Products
Intermech Sealing Solutions (Pty) Ltd63 Van Den Dool Rd, Nuffield, Springs, Gauteng // PO Box 11408, Selcourt, Springs, Gauteng
Tel: +27 11 818 2372 // Fax: +27 11 363 2989www.intermech.net // info@fluidseal.co.za
Features :
OD A/B C
Kg mm mm mm mm
FDS-1A-35-BLU BLUE 16 38.6 44 75 115
FDS-1A-70-GRN GREEN 32 34.5 44 75 115
FDS-1A-120-GRY GREY 55 30.0 44 75 115
FDS-1A-220-BRO BROWN 100 27.9 44 75 115
FDS-1A-370-PUR PURPLE 168 25.4 44 75 115
FDS-1C-250-BLU BLUE 114 46.2 76 100 145
FDS-1C-450-GRN GREEN 205 38.1 76 100 145
FDS-1C-625-BLK BLACK 284 33.3 76 100 145
FDS-1C-800-GRY GREY 364 30.5 76 100 145
FDS-1C-1000-RED RED 455 27.7 76 100 145
FDS-1C-1250-BRO BROWN 568 26.2 76 100 145
FDS-1C-1700-PUR PURPLE 773 25.4 76 100 145
Free Standing Spring Vibration Isolator
Compressors
Pumps & fansPackaged air conditioning equipmentFloor piping supports
Rated Capacity Rated DeflectionDimensions
Stock Code Colour Mark
M10 x 30mm Leveling Bolt
Operating Height
15mm Dia Hole
Non-skid Noise Pad
C
A
B
Equipment footor mountingbracket
Typical Applications :
Design Features :
Vibration Products
Easily installed all purpose unhoused spring mountingFree standing and laterally stableSpring can be interchanged according to load/deflection characteristicsHeavy duty steel spring for high deflection and vibration colour coded load rangefor ease of identificationLevelling bolt with locking cap screw, capable of compensating for full static deflectionFormed top & bottom location cupsNon skid ribbed based for added noise isolationCan be used in conjunction with precompressed spring mountings (FLS Type)
Springs have lateral spring stiffness greater than 0.8 x rated vertical stiffnessDesigned to provide up to 50% overload capacity
Intermech Sealing Solutions (Pty) Ltd63 Van Den Dool Rd, Nuffield, Springs, Gauteng // PO Box 11408, Selcourt, Springs, Gauteng
Tel: +27 11 818 2372 // Fax: +27 11 363 2989www.intermech.net // info@fluidseal.co.za
e-Z Lock KitFeatures :
Tamper proof designEase of installationDouble lock out facilitySimple and cost effective designSupplied with stud and nuts along with installation instructions Features enhance conveyor safetyComplies with legislative requirements
To be installed on Eaton Cutler Hammer Single & Double Ended Conveyor Trip Switch
South African Registered Design Number F2011/01676 Published 2011/10/24
European Community Design Number 001323687 Published 2012/04/24
Intermech Sealing Solutions (Pty) Ltd Reg. No 1997/02751/07
63 Van Den Dool Rd P O Box 11408
Nuffield, Springs Selcourt, Springs
Gauteng, South Africa Gauteng, South Africa, 1567
Manufacturer: Graftec™ � +27-11-818-2372 Email: clinton@intermech.net
Distributor: Slade Packing �+27-11-363-2989 Internet: www.intermech.net
Directors: John Fleming, Johan Hefers
Supplier Name: Intermech Sealing Solutions (Pty) Ltd
Postal Address: PO Box 11408
Selcourt
1567
Physical Address: 63 Wright Road
Nuffield
Springs, 1559
Telephone Number: (011) 818 – 2372
Fax Number: (011) 363 – 2989
Bank Name: Standard Bank
Bank Account No.: 021165394
Branch No.: 015-641
VAT No.: 4910163643
Registration No.: 97/02751/07
CONTACT LIST
CONTACT PERSON DEPARTMENT EMAIL ADDRESS MOBILE NUMBERS
Clinton Uys Sales clinton@intermech.net 083 655 5562
John Fleming Sales john@fluidseal.co.za 083 301 7144
Tom Trollip Sales – KZN tom@intermech.net 083 301 7147
Eloise Pyper Internal Sales info@fluidseal.co.za
Sandy Ackerman Accounts accounts@fluidseal.co.za
Betricia Jacobsz Accounts reception@fluidseal.co.za
SPORTS & LEISUREIntermech Sealing Solutions (Pty) Ltd
63 Van Den Dool Rd, Nuffield, Springs, Gauteng, SA
info@fluidseal.co.za
IZWEEALS
TMGRAFTEC TM
ARMFLEXVibration Products
Recommended