รายชื่อเอกสารใหม่ 2559) ACCEPTANCE (APPROVAL) IEClibrary.tisi.go.th/downloadable/new_release/56_apr-jun5… · · 2016-09-14(เมษายน-มิถุนายน

รายชอเอกสารใหม (เมษายน-มถนายน 2559 หนา 1

รายชอเอกสารใหม (เมษายน-มถนายน 2559)

ACCEPTANCE (APPROVAL) IEC

IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

IEC TS 62686-1 2015 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ACCEPTANCE INSPECTION IEC

IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ADHESIVES ISO ISO/TS 11405 2015 Dentistry - Testing of adhesion to tooth structure /By

International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.

AIRCRAFT COMPONENTS IEC IEC TS 62686-1 2015 Process management for avionics - Electronic components

for aerospace, defence and high performance (ADHP) applications - P.1: General requirements for high reliability integrated circuits and discrete semiconductors /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ALTERNATING CURRENT IEC IEC/TR 60919-2 2008 Performance of high-voltage direct current (HVDC) systems

with line-commutated converters - P.2: Faults and switching /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2008.


IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.

ALUMINIUM ISO

ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg, P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

AMPLIFIERS IEC

IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

ANALOGUE SIGNALS IEC

IEC 62014-5 2015 Quality of electronic and software intellectual property used in system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

APPROVAL ORGANIZATIONS ISO

ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.

ARC-WELDING EQUIPMENT IEC

IEC 60974-10 2014 Are welding equipment - P.10: Electromagnetic compatibility (EMC) requirements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2014.

ARTIFICIAL WEATHERING TESTS IEC

IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.


ASSESSED QUALITY IEC IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product

requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing

audit and certification of management systems - P.1: Requirements /By International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC). Geneva: ISO, 2015.

ATOMIC ABSORPTION SPECTROPHOTOMETRY IEC

IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

AUDIO EQUIPMENT IEC IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia

systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

AUTOMATIC CONTROL SYSTEMS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and

communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

AXIAL STRESS IEC IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices -

P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


BATTERY CHARGERS IEC


BATTERY-POWERED DEVICES IEC


BETA-PARTICLES ISO,.

ISO 9697 2015 Water quality - Gross beta activity in non-saline water - Test method using thick source /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.

BIOFUELS ISO


ISO 16968 2015 Solid biofuels - Determination of minor elements /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride, sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

BIOMASS ISO






BUS NETWORKS

IEC

IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

BUSHES (MECHANICAL COMPONENTS) IEC

IEC 60940 2015 Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

CALCIUM ISO


CALIBRATION IEC

IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

CAPACITORS IEC



CAPS (CLOSURES) IEC IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps

(excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

CATECHOL ISO ISO 11709 2011 Soil quality - Determination of selected coal-tar-derived phenolic

compounds using high performance liquid chromatography (HPLC) /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

CATERING EQUIPMENT IEC IEC TS 62835 2015 Electric toasters for household and similar use - Methods and

measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

CERAMICS ISO ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for

Standardization (ISO). 4th ed. Geneva: ISO, 2015. CERTIFICATION (APPROVAL) ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing


CERTIFICATION BODIES ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing


CHEMICAL ANALYSIS AND TESTING ISO ISO 11709 2011 Soil quality - Determination of selected coal-tar-derived phenolic



ISO 11916-1 2013 Soil quality - Determination of selected explosives and related compounds - P.1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

ISO 13196 2013 Soil quality - Screening soils for selected elements by energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument /By International Organization for Standardization (ISO). Geneva: ISO, 2013.





ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.

ISO 6872 2015 Dentistry - Ceramic materials /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2015.

CHEMICAL COMPOSITION ISO ISO 18227 2014 Soil quality - Determination of elemental composition by X-ray

fluorescence /By International Organization for Standardization (ISO). Geneva: ISO, 2014.

CHEMICAL-RESISTANCE TESTS IEC

IEC 61010-2-051 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

CHLORIDES ISO



CHLORINE ISO


CLEARANCE DISTANCES IEC

IEC TS 61936-2 2015 Power installations exceeding 1 kV a.c. and 1 ,5 kV d.c. - P.2: d.c. /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

COAL TAR ISO

ISO 11709 2011 Soil quality - Determination of selected coal-tar-derived phenolic compounds using high performance liquid chromatography (HPLC) /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

COAXIAL CONNECTORS IEC IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for

radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω; (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

COMBUSTION TEST METHODS ISO ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and

chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

COMMERCE ISO ISO 14533-1 2014 Processes, data elements and documents in commerce, industry

and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.


COMMUNICATION CABLES IEC IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic

optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

IEC 61196-1-100 2015 Coaxial communication cables - P.1-100: Electrical methods - General requirements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

COMMUNICATION EQUIPMENT IEC IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic


COMMUNICATION NETWORKS IEC IEC 62439-7 2011 Industrial communication networks - High availability

automation networks - P.7: Ring-based Redundancy Protocol (RRP) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2011.


COMMUNICATION PROCEDURES IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and


COMPRESSORS IEC IEC 60335-2-34 2012 Household and similar electrical appliances - Safety - P.2-34:

Particular requirements for motor-compressors /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2012.

COMPUTER HARDWARE IEC IEC 62014-5 2015 Quality of electronic and software intellectual property used in

system and system on chip (SoC) designs /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


COMPUTER NETWORKS IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and


COMPUTER PERIPHERAL EQUIPMENT IEC IEC 62014-5 2015 Quality of electronic and software intellectual property used in


COMPUTER SOFTWARE IEC IEC 62014-5 2015 Quality of electronic and software intellectual property used in


CONCENTRATION (CHEMICAL) ISO


CONTAMINATION ISO ISO 11709 2011 Soil quality - Determination of selected coal-tar-derived phenolic



COOKING APPLIANCES IEC

IEC TS 62835 2015 Electric toasters for household and similar use - Methods and measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


COPPER IEC

IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

COSMETIC APPLIANCES IEC

IEC 60335-2-27 2012 Household and similar electrical appliances - Safety - P.2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2012.

CRESOL ISO


CUTTING TOOLS IEC

IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.

DATA ELEMENTS ISO

ISO 14533-1 2014 Processes, data elements and documents in commerce, industry and administration - Long term signature profiles - P.1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES) /By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2014.

DATA PROCESSING IEC



DATA TRANSMISSION IEC

IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


DENTAL MATERIALS ISO


ISO/TS 11405 2015 Dentistry - Testing of adhesion to tooth structure /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2015.

DENTAL PROSTHESIS ISO



DENTISTRY ISO



DETECTORS (CIRCUITS) IEC

IEC 61243-3 2014 Live working - Voltage detectors - P.3: Two-pole low-voltage type /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2014.


DIAGNOSIS (MEDICAL) IEC

IEC 60601-2-45 2011 Medical electrical equipment - P. 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2011.

DIAMOND TOOLS IEC


DIELECTRIC DEVICES IEC

IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

DIGITAL SIGNALS IEC


DIGITAL SIGNATURES ISO


DIRECT CURRENT IEC



DISCHARGE LAMPS IEC

IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps (excluding fluorescent lamps) - Performance requirements for low frequency square wave /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

DISPLAY DEVICES IEC

IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection - Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

DISPLAY DEVICES (COMPUTERS) IEC

IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

IEC 61988-4-1 2015 Plasma display - P.4-1: Environmental testing - Climatic and mechanical /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

DRILLING MACHINES IEC


DRY-TYPE TRANSFORMERS IEC

IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ECONOMIC DEVELOPMENT ISO

ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.


ELECTRIC CABLES IEC

IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic optical cable test procedures - Mechanical test methods /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


IEC 61169-51 2015 Radio-frequency connectors - P.51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω (type QLI) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

IEC 61196-1-100 2015 Coaxial communication cables - P.1-100: Electrical methods General requirements /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ELECTRIC CHARGE IEC


ELECTRIC CONDUCTORS IEC



ELECTRIC CONNECTORS IEC





IEC PAS 61076-3-122 2015 Connectors for electronic equipment - Product requirements - P.3-122: Detail specification for rugged 8-way, shielded, free and fixed connectors /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ELECTRIC CONTROL EQUIPMENT IEC

IEC 62271-200 2011 High-voltage switchgear and controlgear - P.200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2011.

ELECTRIC CONVERTORS IEC IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International

Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ELECTRIC ENCLOSURES IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control

control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ELECTRIC INSULATORS IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass

insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ELECTRIC MOTORS IEC IEC 60335-2-34 2012 Household and similar electrical appliances - Safety - P.2-34:

Particular requirements for motor-compressors /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2012.



ELECTRIC POWER SYSTEMS IEC


ELECTRIC POWER TRANSMISSION IEC


ELECTRIC SUBSTATIONS IEC


ELECTRIC TERMINALS IEC


ELECTRIC WIRES IEC


ELECTRICAL COMPONENTS IEC











ELECTRICAL CONDUCTANCE IEC



ELECTRICAL CONNECTIONS IEC



ELECTRICAL ENGINEERING IEC

IEC 60079-5 2015 Explosive atmospheres - P.5: Equipment protection by powder filling "q" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.

IEC 60079-6 2015 Explosive atmospheres - P.6: Equipment protection by liquid immersion "o" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.

IEC 60364-7-722 2015 Low-voltage electrical installations - P.7-722: Requirements for special installations or locations - Supplies for electric vehicles /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ELECTRICAL EQUIPMENT IEC

IEC 60079-32-2 2015 Explosive atmospheres - P.32-2: Electrostatics hazards - Tests /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.








IEC TS 60079-40 2015 Explosive atmospheres - P.40: Requirements for process sealing between flammable process fluids and electrical systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

ELECTRICAL HOUSEHOLD APPLIANCES IEC IEC 60335-2-27 2012 Household and similar electrical appliances - Safety - P.2-27:

Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2012.

IEC 60335-2-34 2012 Household and similar electrical appliances - Safety - P.2-34: Particular requirements for motor-compressors /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2012.



ELECTRICAL INSTALLATIONS IEC IEC 60364-7-722 2015 Low-voltage electrical installations - P.7-722: Requirements

for special installations or locations - Supplies for electric vehicles /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


ELECTRICAL INSULATION IEC



ELECTRICAL INSULATION DEVICES IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass


ELECTRICAL MEASURING INSTRUMENTS IEC IEC 61010-2-061 2015 Safety requirements for electrical equipment for

measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.


ELECTRICAL SAFETY IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for

measurement, control, and laboratory use - P.2-051: Particular requirements for laboratory equipment for mixing and stirring /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.



ELECTRICAL TESTING IEC

IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2015.



IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2015.

ELECTRICALLY-OPERATED DEVICES IEC




ELECTROMAGNETIC COMPATIBILITY (EMC) IEC

IEC 61000-4-6 2013 Electromagnetic compatibility (EMC) - P.4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2013.

IEC 60974-10 2014 Are welding equipment - P.10: Electromagnetic compatibility (EMC) requirements /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2014.

IEC 61000-4-30 2015 Electromagnetic compatibility (EMC) - P.4-30: Testing and measurement techniques - Power quality measurement methods /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

ELECTROMECHANICAL DEVICES IEC

IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices - P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


ELECTRONIC EQUIPMENT AND COMPONENTS IEC IEC 60601-2-33 2010 Medical electrical equipment - P. 2-33: Particular

requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2010.

IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.















ELECTRONIC SIGNATURES ISO


ENAMELLED WIRES IEC


ENDURANCE TESTING IEC




ENVIRONMENTAL MANAGEMENT ISO


ENVIRONMENTAL TESTING IEC




EQUIPMENT SAFETY IEC



EXPLOSIVE ATMOSPHERES IEC


IEC 60079-5 2015 Explosive atmospheres - P.5: Equipment protection by powder filling "q" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.

IEC 60079-6 2015 Explosive atmospheres - P.6: Equipment protection by liquid immersion "o" /By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2015.

IEC 60079-32-2 2015 Explosive atmospheres - P.32-2: Electrostatics hazards - Tests /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

IEC TS 60079-40 2015 Explosive atmospheres - P.40: Requirements for process sealing between flammable process fluids and electrical systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

EXTRACTION METHODS OF ANALYSIS ISO ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,

sodium and potassium content /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

FIBRE OPTIC CABLES IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test

procedures - Numerical aperture measurement /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.



FIBRE OPTIC CONNECTORS IEC IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components

- Basic test and measurement procedures - P.3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

FIBRE OPTICS IEC





IEC


FIELD TESTING ISO

ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.

FIELDBUS IEC,.


FREQUENCY CONTROL IEC


FUELS ISO






GAIN CONTROL IEC IEC 61290-1-3 2015 Optical amplifiers - Test methods - P.1-3: Power and gain

parameters - Optical power meter method /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.

GAS ANALYZERS IEC IEC 61207-7 2013 Expression of performance of gas analyzers - P.7: Tuneable

semiconductor laser gas analyzers /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

GLASS FIBRES IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided

resin or varnish-impregnated, bare or enamelled rectangular copper wire, temperature index 200 /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

GRADES (QUALITY) IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided


GROUND WATER ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by

near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.

HAEMODIALYSERS


ISO ISO 8637 2010 Cardiovascular implants and extracorporeal systems -

Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2010.

HALIDE LAMPS IEC IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps


HAZARDS ISO ISO 13344 2004 Estimation of the lethal toxic potency of fire effluents /By

International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.

HIGH VOLTAGE IEC IEC/TR 60919-2 2008 Performance of high-voltage direct current (HVDC) systems

with line-commutated converters - P.2: Faults and switching /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2008.


HIGH-VOLTAGE EQUIPMENT IEC IEC 60601-2-54 2009 Medical elecdtrical equipment - P.2-54: Particular

requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy /By International Electrotechnical Commission (IEC). Geneva: IEC, 2009.

HIGH-VOLTAGE INSTALLATIONS IEC



HIGH-VOLTAGE TESTS


IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass


HOUSEHOLD EQUIPMENT IEC IEC 60335-2-27 2012 Household and similar electrical appliances - Safety - P.2-27:



INDUSTRIAL ELECTRICAL INSTALLATIONS IEC IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International

Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015. INFRARED RADIATION IEC IEC 60335-2-27 2012 Household and similar electrical appliances - Safety - P.2-27:


INSULATED WIRES IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided


INTEGRATED CIRCUITS IEC IEC TS 62686-1 2015 Process management for avionics - Electronic components


INTENSITY IEC



INTERFACES IEC IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia

systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015. INTERFACES (DATA PROCESSING) IEC IEC 62014-5 2015 Quality of electronic and software intellectual property used in



IEC PAS 62948 2015 Industrial networks - Wireless communication network and communication profiles - WIA-FA /By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2015.

IONIZATION IEC IEC 61010-2-061 2015 Safety requirements for electrical equipment for


IRON ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. LABORATORY EQUIPMENT IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for




LASERS IEC


LIGHT HAZARDS IEC IEC 60335-2-27 2012 Household and similar electrical appliances - Safety - P.2-27:


LIGHTING EQUIPMENT IEC IEC 62811 2015 AC and/or DC-supplied electronic controlgear for discharge lamps


LIQUID CHROMATOGRAPHY ISO ISO 11916-1 2013 Soil quality - Determination of selected explosives and related

compounds - P.1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

LIQUID CRYSTAL DEVICES IEC IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection -

Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

LIQUID CRYSTAL DISPLAYS IEC IEC 61747-20-2 2015 Liquid crystal display devices - P.20-2: Visual inspection -

Monochrome matrix liquid crystal display modules (excluding all active matrix liquid crystal display modules) /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


LOW VOLTAGE IEC


MACHINE TOOLS IEC


MAGNESIUM ISO


MAMMOGRAPHY APPARATUS IEC


MECHANICAL MEASUREMENT IEC


MECHANICAL TESTING IEC





METALS IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control


MULTIMEDIA SYSTEMS IEC IEC 62889 2015 Digital video interface - Gigabit video interface for multimedia

systems /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

NATURAL RUBBER ISO ISO 1656 2014 Rubber, raw natural, and rubber lates, natural - Determination of

nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014.

NETWORK LAYER (OSI) IEC IEC PAS 62948 2015 Industrial networks - Wireless communication network and


NUCLEAR-ELECTRIC POWER STATIONS IEC IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important

to safety - Management of ageing of sensors and transmitters - P.1: Pressure transmitters /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

NUCLEAR POWER IEC IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important



NUCLEAR REACTORS IEC


OIL-IMMERSED TRANSFORMERS IEC


OPEN SYSTEMS INTERCONNECTION IEC


OPTICAL AMPLIFIERS IEC


OPTICAL COMMUNICATION SYSTEMS IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test



OPTICAL FIBRES IEC






OPTICAL MEASUREMENT IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test




OPTOELECTRONIC DEVICES IEC






PANELS IEC


PERFORMANCE TESTING IEC



PHENOL ISO


PHENOLS ISO


PHOSPHORUS ISO



PHYSICAL PROPERTIES OF MATERIALS ISO


PIEZOELECTRIC DEVICES IEC


PIEZOELECTRIC MATERIALS IEC


PIPES BSI

PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Poylethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.

PIPEWORK SYSTEMS BSI


PLASMA DISPLAY DEVICES IEC




PLASMA DISPLAYS IEC



PLASTICS AND RUBBER TECHNOLOGY ISO ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect

of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015.

POLLUTION IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass

insulators to be used on d.c. systems /By International Electrotechnical Commission (IEC). 2nd ed. - Geneva: IEC, 2015.

POLYETHYLENE BSI PD CEN/TS 12201-7 2014 Plastics piping systems for water supply, and for

drainage and sewerage under pressure - Poylethylene (PE) /By British Standards Institution (BSI) and European Committee for Standardization (CEN). London: BSI, 2014.

PORTABLE MACHINE TOOLS IEC IEC 62841-3-6 2014 Electric motor-operated hand-held tools, transportable tools

and lawn and garden machinery - Safety - P.3-6: Particular requirements for transportable diamond drills with liquid system /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.

POTASSIUM ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,



POTENTIOMETERS (RESISTORS) IEC


POWER TRANSFORMERS IEC


PROBES IEC


PROCESS CONTROL IEC

IEC 61285 2015 Industrial-process control - Safety of analyser houses /By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2015.


PROTECTED ELECTRICAL EQUIPMENT IEC




QUALIFICATION APPROVAL IEC IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components



QUALITY ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements

for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015. QUALITY ASSURANCE SYSTEMS IEC IEC TS 62686-1 2015 Process management for avionics - Electronic components


ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing


QUALITY AUDITING ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing


QUALITY MANAGEMENT ISO ISO/IEC 17021-1 2015 Conformity assessment - Requirements for bodies providing



RADIATION MEASUREMENT ISO


RADIOCOMMUNICATION IEC


RADIOFREQUENCIES IEC



RATED VOLTAGE IEC



RECORDS (DOCUMENTS) ISO



RESILIENCE ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements

for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

RESISTANCE MEASUREMENT IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for


RESISTORS IEC IEC 60940 2015 Guidance information on the application of capacitors, resistors,

inductors and complete filter units for electromagnetic interference suppression /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.

ROAD VEHICLES IEC IEC 61851-24 2014 Electric vehicle conductive charging system - P.24: Digital

communication between a.d.c.EV charging station and an electric vehicle for control of d.c. charging /By International Electrotechnical Commission (IEC). Geneva: IEC, 2014.

RUBBER ISO ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect

of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015. SAFETY IEC IEC 62765-1 2015 Nuclear powers plants - Instrumentation and control important


SAFETY DEVICES IEC IEC 61010-2-051 2015 Safety requirements for electrical equipment for



SAFETY MEASURES IEC IEC 60335-2-27 2012 Household and similar electrical appliances - Safety - P.2-27:






SAMPLING METHODS IEC


SEMICONDUCTOR DEVICES IEC IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International

Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015. IEC 61988-2-6 2015 Plasma display panels - P.2-6: Measuring methods - APL

dependent gamma and colour characteristics /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.





SEMICONDUCTOR TECHNOLOGY IEC


SEMICONDUCTORS IEC


SIGNAL PROCESSING IEC


SIGNAL STRENGTH IEC


SILICON ISO



SKIN-TREATMENT APPLIANCES IEC IEC 60335-2-27 2012 Household and similar electrical appliances - Safety - P.2-27:


SODIUM ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,


SODIUM-VAPOUR LAMPS IEC


SOIL CLASSIFICATION TESTS ISO


SOIL IMPROVEMENT ISO


SOIL SAMPLING ISO




SOIL SURVEYS ISO ISO 17184 2014 Soil quality - Determination of carbon and nitrogen by

near-infrared spectrometry (NIRS) /By International Organization for Standardization (ISO). Geneva: ISO, 2014.

SOIL TESTING ISO ISO 11916-1 2013 Soil quality - Determination of selected explosives and related

compounds - P.1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection /By International Organization for Standardization (ISO). Geneva: ISO, 2013.


SOILS ISO ISO 13196 2013 Soil quality - Screening soils for selected elements by

energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument /By International Organization for Standardization (ISO). Geneva: ISO, 2013.



SOILS - QUALITY ISO







SOLID FUELS ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16968 2015 Solid biofuels - Determination of minor elements /By

International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16994 2015 Solid biofuels - Determination of total content of sulfur and

chlorine /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16995 2015 Solid biofuels - Determination of the water soluble chloride,


SOLID LASERS IEC

IEC 61207-7 2013 Expression of performance of gas analyzers - P.7: Tuneable semiconductor laser gas analyzers /By International Electrotechnical Commission (IEC). Geneva: IEC, 2013.

SPECIAL CERAMICS ISO


SPECIFICATION (APPROVAL IEC







SPECTROPHOTOMETRY ISO


SPECTROSCOPY IEC

IEC 61010-2-061 2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - P.2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization /By International Electrotechnical Commission (IEC). 3rd ed. - - Geneva: IEC, 2015.


STABILITY IEC



STIRRERS (LABORATORY) IEC


SULFUR ISO


SURFACE MOUNTING IEC

IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control control and selection - Standard outlines and terminal lead connections - P.4: Hybrid enclosure outlines /By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2015.

SURFACE MOUNTING DEVICES IEC IEC 61837-4 2015 Surface mounted piezoelectric devices for frequency control


SUSTAINABILITY ISO ISO/TS 37151 2015 Smart community infrastructures - Principles and requirements

for performance metrics /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

SUSTAINABLE DEVELOPMENT ISO


SWITCHGEAR IEC



SWITCHING SUBSTATIONS IEC


SYNTAX IEC


SYNTHETIC RUBBER ISO

ISO 1656 2014 Rubber, raw natural, and rubber lates, natural - Determination of nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014.

TEAR TESTS ISO

ISO 34-2 2011 Rubber, vulcanized or thermoplastic - Determination of tear strength - P.2: Small (Delft) test pieces /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2011.

TELEVISION IEC


TEMPERATURE IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided


TEMPERATURE MEASUREMENT IEC IEC 60793-1-43 2015 Optical fibres - P.1-43: Measurement methods and test



TENSILE TESTING IEC


TEST EQUIPMENT IEC IEC 60794-1-21 2015 Optical fibre cables - P.1-21: Generic specification - Basic




TEST METHODS IEC



ISO


TEST SPECIMENS IEC



ISO ISO 1656 2014 Rubber, raw natural, and rubber lates, natural - Determination of

nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014. ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015. ISO 16968 2015 Solid biofuels - Determination of minor elements /By

International Organization for Standardization (ISO). Geneva: ISO, 2015.

TESTING IEC IEC TS 61245 2015 Artificial pollution tests on high-voltage ceramic and glass


TESTING CONDITIONS IEC IEC 61169-47 2015 Radio-frequency connectors - P.47: Sectional specification for

radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick) /By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2015.





THERMAL ANALYSIS IEC IEC 61010-2-061 2015 Safety requirements for electrical equipment for



THERMAL RESISTANCE IEC



THERMAL-SHOCK RESISTANCE IEC


THERMOPLASTIC POLYMERS ISO ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect

of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015.

THIN FILMS IEC IEC 62047-15 2015 Semiconductor devices - Micro-electromechanical devices -

P.15: test method of bonding strength between PDMS and glass /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.

TITANIUM ISO ISO 16967 2015 Solid biofuels - Determination of major elements - AI, Ca, Fe, Mg,

P, K, Si, Na and Ti /By International Organization for Standardization (ISO). Geneva: ISO, 2015.

TOASTERS IEC IEC TS 62835 2015 Electric toasters for household and similar use - Methods and

measurements for improving accessibility /By International Electrotechnical Commission (IEC). Geneva: IEC, 2015.


TOWN ORGANIZATIONS ISO


TRACE ELEMENT ANALYSIS ISO



TRANSFORMERS IEC

IEC 61378-3 2015 Converter transformers - P.3: Application guide /By International Electrotechnical Commission (IEC). 2nd ed. - - Geneva: IEC, 2015.

TRANSMITTANCE IEC


TRANSMITTERS IEC


TRANSPORTABLE IEC



TYPE TESTING IEC


ULTRAVIOLET RADIATION IEC

IEC 60335-2-27 2012 Household and similar electrical appliances - Safety - P.2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation /By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2012.

URBAN AREAS ISO


VARIABLE CAPACITORS IEC


VARIABLE RESISTORS IEC


VARNISHED PRODUCTS IEC



VERIFICATION ISO


IEC


VIDEO TAPE RECORDERS IEC


VISUAL INSPECTION (TESTING) IEC IEC 61300-3-53 2015 Fibre optic interconnecting devices and passive components



VOLTAGE IEC


VULCANIZED MATERIALS ISO

ISO 1817 2015 Rubber, vulcanized or thermoplastic - Determination of the effect of liquids /By International Organization for Standardization (ISO). 6th ed. Geneva: ISO, 2015.


VULCANIZED RUBBER ISO

ISO 1656 2014 Rubber, raw natural, and rubber lates, natural - Determination of nitrogen content /By International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2014.



ISO 34-2 2011 Rubber, vulcanized or thermoplastic - Determination of tear strength - P.2: Small (Delft) test pieces /By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2011.

ISO 3384-1 2011 Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - P.1: Testing at constant temperature /By International Organization for Standardization (ISO). Geneva: ISO, 2011.

WASTES ISO



WATER ISO


WATER - QUALITY ISO



WATER SUPPLY BSI


IEC


WATER TESTING ISO


WINDINGS IEC


WIRES IEC IEC 60317-40 2015 Particular types of winding wires - P.40: Glass-fibre braided


X-RAY FLUORESCENCE SPECTROMETRY ISO ISO 13196 2013 Soil quality - Screening soils for selected elements by

energy-dispersive X-ray fluorescence spectrometry using a handheld or portable instrument /By International Organization for Standardization (ISO). Geneva: ISO, 2013.

ISO



มาตรฐานไทย

จกรยานยนต - ชนสวน มอก. 97 2557 ผาเบรกส าหรบยานยนต

ดวงโคมไฟฟา มอก. 902-2557 ดวงโคมไฟฟา

เลม 1 - คณลกษณะทตองการทวไปและการทดสอบ

เลม 2(1) 2557 ดวงโคมไฟฟาตดประจ าทส าหรบจดประสงคทวไป

เลม 2(2) 2557 ดวงโคมไฟฟาฝง

เลม 2(3) 2557 ดวงโคมไฟฟาส าหรบใหแสงสวางบนถนน

เลม 2(4) 2557 ดวงโคมไฟฟาเคลอนยายไดส าหรบจดประสงคทวไป

เลม 2(5) 2557 ดวงโคมไฟฟาสาดแสง

เลม 2(6) 2557 ดวงโคมไฟฟามอถอ

เลม 2(7) 2557 ดวงโคมไฟฟาใชในทเลยงสตวน าและพชน า

เลม 2(8) 2557 ดวงโคมไฟฟาใหแสงกลางคนตดตงกบเตารบไฟฟาประธาน

เลม 2(9) 2557 ดวงโคมไฟฟาฝงพน

เลม 2(10) 2557 ดวงโคมไฟฟาส าหรบสระวายน าและการใชงานทคลายกน

เลม2(12) 2557 ดวงโคมไฟฟาจ ากดอณหภมพนผว

ผาเบรก มอก. 97 2557 ผาเบรกส าหรบยานยนต

ฟาผา - การปองกน มอก. 1586 ล.4 2557 การปองกนฟาผา เลม 4 ระบบไฟฟาและอเลกทรอนกสภายในสงปลกสราง

รถยนต - ชนสวน มอก. 97 2557 ผาเบรกส าหรบยานยนต

ระบบปองกนฟาผา มอก. 1586 ล.4 2557 การปองกนฟาผา เลม 4 ระบบไฟฟาและอเลกทรอนกสภายในสงปลกสราง

วสดและอปกรณไฟฟา มอก. 902-2557 ดวงโคมไฟฟา

เลม 1 - คณลกษณะทตองการทวไปและการทดสอบ


เลม 2(1) 2557 ดวงโคมไฟฟาตดประจ าทส าหรบจดประสงคทวไป

เลม 2(2) 2557 ดวงโคมไฟฟาฝง

เลม 2(3) 2557 ดวงโคมไฟฟาส าหรบใหแสงสวางบนถนน

เลม 2(4) 2557 ดวงโคมไฟฟาเคลอนยายไดส าหรบจดประสงคทวไป

เลม 2(5) 2557 ดวงโคมไฟฟาสาดแสง

เลม 2(6) 2557 ดวงโคมไฟฟามอถอ

เลม 2(7) 2557 ดวงโคมไฟฟาใชในทเลยงสตวน าและพชน า

เลม 2(8) 2557 ดวงโคมไฟฟาใหแสงกลางคนตดตงกบเตารบไฟฟาประธาน

เลม 2(9) 2557 ดวงโคมไฟฟาฝงพน

เลม 2(10) 2557 ดวงโคมไฟฟาส าหรบสระวายน าและการใชงานทคลายกน

เลม2(12) 2557 ดวงโคมไฟฟาจ ากดอณหภมพนผว


Alphabetical Subject Index

Subject Page

Acceptance (approval) 1

Acceptance inspection 1

Adhesives 1

Aircraft components 1

Alternating current 1

Aluminium 2

Amplifiers 2

Analogue signals 2

Approval organizations 2

Arc-welding equipment 2

Artificial weathering tests 2

Assessed quality 3

Atomic absorption spectrophotometry 3

Audio equipment 3

Automatic control systems 3

Axial stress 3

Battery chargers 4

Battery-powered devices 4

Biofuels 4

Biomass 4

Bus networks 5

Bushes (mechanical components) 5

Calcium 5

Calibration 5

Capacitors 5

Caps (closures) 6


Subject Page

Catechol 6

Catering equipment 6

Ceramics 6

Certification (approval) 6

Certification bodies 6

Chemical analysis and testing 6

Chemical composition 7

Chemical-resistance tests 7

Chlorides 7

Chlorine 8

Clearance distances 8

Coal tar 8

Coaxial connectors 8

Combustion test methods 8

Commerce 8

Communication cables 9

Communication equipment 9

Communication networks 9

Communication procedures 9

Compressors 9

Computer hardware 9

Computer networks 10

Computer peripheral equipment 10

Computer software 10

Concentration (chemical) 10

Contamination 10

Cooking appliances 10


Subject Page

Copper 11

Cosmetic appliances 11

Cresol 11

Cutting tools 11

Data elements 11

Data processing 11

Data transmission 12

Dental materials 12

Dental prosthesis 12

Dentistry 12

Detectors (circuits) 12

Diagnosis (medical) 13

Diamond tools 13

Dielectric devices 13

Digital signals 13

Direct current 13

Discharge lamps 14

Display devices 14

Display devices (computers) 14

Drilling machines 14

Dry-type transformers 14

Economic development 14

Electric cables 15

Electric charge 15

Electric conductors 15

Electric connectors 15

Electric control equipment 16


Subject Page

Electric convertors 16

Electric enclosures 16

Electric insulators 16

Electric motors 16

Electric power systems 17

Electric power transmission 17

Electric substations 17

Electric terminals 17

Electric wires 17

Electrical components 17

Electrical conductance 18

Electrical connections

Electrical engineering

Electrical equipment

Electrical faults

Electrical household appliances

Electrical installations

Electrical insulation

Electrical insulation devices

Electrical measuring instruments

Electrical medical equipment

Electrical safety

Electrical testing

Electrically-operated devices

Electromagnetic compatibility (EMC)

Electromechanical devices

Electronic equipment and components


Subject Page

Electronic signatures

Enamelled wires

Endurance testing

Environmental management

Environmental testing

Equipment safety

Explosive atmospheres

Extraction methods of analysis

Fibre optic cables

Fibre optic connectors

Fibre optics

Field testing

Fieldbus

Fire

Fire tests

Flexible pipes Petroleum products

Food products

Frequency control

Fuels

Gain control

Gas analysis

Gas analyzers

Glass fibres

Gloves

Grades (quality)

Ground water

Haemodialysers


Subject Page

Halide lamps

Hazards

High voltage

High-voltage equipment

High-voltage installations

High-voltage tests

Household equipment

Hydraulic transmission systems

Hydroquinone

Industrial electrical installations

Industries

Information Medical equipment

Infrared radiation

Inspection

Installation

Instructions for use

Instruments

Insulated wires

Integrated circuits

Intensity

Interfaces

Interfaces (data processing)

Ionization

Iron

Kinematic viscosity

Laboratories

Laboratory equipment


Subject Page

Laboratory testing

Lasers

Light hazards

Lighting equipment

Liquid chromatography

Liquid crystal devices

Liquid crystal displays

Liquids

Low voltage

Machine tools

Magnesium

Magnetic fields

Magnetic measurement

Mammography apparatus

Management

Measurement

Measuring instruments

Mechanical measurement

Mechanical testing

Medical equipment

Medical radiography

Medical radiology

Mercury-vapour lamps

Metal-vapour lamps

Metals

Milk

Mixing


Subject Page

Multimedia systems

Nailed joints Structural timber

Natural rubber

Network layer (OSI)

Nuclear-electric power stations

Nuclear magnetic resonance spectrometry

Nuclear power

Nuclear reactors

Occupational safety

Oil-immersed transformers

Oil pipelines

Open systems interconnection

Optical amplifiers

Optical communication systems

Optical fibres

Optical measurement

Optoelectronic devices

Organizations

Panels

Partitions

Performance

Performance testing

Personnel

Petroleum products

Phenol

Phenols

Phosphorus


Subject Page

Physical properties of materials

Piezoelectric devices

Piezoelectric materials

Pipes

Pipework systems

Plasma display devices

Plasma displays

Plastics and rubber technology

Pollution

Polyethylene

Portable machine tools

Potassium

Potentiometers (resistors)

Power transformers

Pressure

Probes

Process control

Profile

Properties

Protected electrical equipment

Qualification approval

Quality

Quality assurance

Quality assurance systems

Quality auditing

Quality management

Radiation hazards


Subject Page

Radiation measurement

Radiation protection

Radiocommunication

Radiofrequencies

Radiology apparatus (medical)

Rated voltage

Records (documents)

Refrigerators

Refuse containers

Reliability

Resilience

Resistance measurement

Resistors

Resonance

Resorcinol

Road lighting

Road vehicles

Rubber

Safety

Safety devices

Safety engineering

Safety measures

Sampling methods

Selection

Semiconductor devices

Semiconductor technology

Semiconductors


Subject Page

Signal processing

Signal strength

Silicon

Skimmed milk

Skin-treatment appliances

Smoke

Sodium

Sodium-vapour lamps

Software techniques

Soil classification tests

Soil improvement

Soil pollution

Soil sampling

Soil surveys

Soil testing

Soils

Soils Quality

Solid fuels

Solid lasers

Special ceramics

Specification (approval)

Spectrophotometry

Spectroscopy

Stability

Stainless steels

Statistical methods of analysis

Steel-wire ropes


Subject Page

Steels

Sterilization (hygiene)

Stiffness

Stirrers (laboratory)

Strength of materials

Structural timber

Sulfur

Surface mounting

Surface mounting devices

Sustainability

Sustainable development

Switchgear

Switching substations

Syntax

Synthetic rubber

Tear tests

Television

Temperature

Temperature measurement

Tensile testing

Test equipment

Test methods

Test specimens

Testing

Testing conditions

Thermal analysis

Thermal resistance


Subject Page

Thermal-shock resistance

Thermoplastic polymers

Thermoplastic rubber

Thin films

Titanium

Toasters

Tolerances (measurement)

Toroidal sealing rings

Town organizations

Toxic gases

Toxic materials

Toxicity

Trace element analysis

Transformers

Transmittance

Transmitters

Transportable

Tunnels

Type testing

Ultraviolet radiation

Urban areas

Variable capacitors

Variable resistors

Varnished products

Verification

Video signals

Video tape recorders


Subject Page

Viscosity

Visual inspection (testing)

Vitamin A

Vitamins

Voltage

Vulcanized materials

Vulcanized rubber

Wallboard

Walls Fire resistance

Wastes

Water

Water Quality

Water supply

Water testing

Windings

Wires

Wrought alloys

X-ray apparatus

X-ray fluorescence spectrometry

ดรรชนหวเรอง

หวเรอง หนา

จกรยานยนต - ชนสวน 60

ดวงโคมไฟฟา 60

ผาเบรก 60

ฟาผา - การปองกน 60


รถยนต - ชนสวน 60

ระบบปองกนฟาผา 60

วสดและอปกรณไฟฟา 60

Documents

รายชื่อเอกสารใหม่ 2559) ACCEPTANCE (APPROVAL) IEClibrary.tisi.go.th/downloadable/new_release/56_apr-jun5… · · 2016-09-14(เมษายน-มิถุนายน