Источники питания - Компэл...• OEM Technical downloads • OEM Technical downloads (IP67 Family) – Datasheets, Certificates, CAD files – Design-in guides

1

Источники питания

2

Philips Lighting OEMProduct information sources

3

Downloads & moreXitanium drivers

• OEM Technical downloads• OEM Technical downloads (IP67 Family)

– Datasheets, Certificates, CAD files– Design-in guides– Leaflets

• Philips Easy Design-in Tool (EDIT)– Driver-Module combination selection tool– Create your ideal configuration in a minute!

• Philips Multione– Quick drivers programming and setting– Also for analysis, diagnostics of the devices.

Before downloading this software you need to request a User Software Key.

http://www.lighting.philips.co.uk/oem-emea/support/technical-downloads.html

http://www.lighting.philips.com.sg/oem-asia/support/technical-downloads

https://www.easydesignintool.philips.com/

http://www.lighting.philips.co.uk/oem-emea/products/philips-multione-configurator

https://www.easydesignintool.philips.com/

4

XitaniumLED drivers

Enable future proof LED technology

• Reliability• Configurability –

maximum flexibility and differentiation

CertaDriveLED drivers

Sometimes good can be great!

• Good quality at basic specifications for high volume LED business

Two brandsLED drivers

5

Xitanium для офисного применения

Особенности• Срок службы 50 000 ч (@ Tc 75˚C)• Рабочий диапазон температур: -20˚C - + 50˚C• Низкий коэффициент пульсаций• Сертификаты: EAC/CE/ENEC

Преимущества• Возможность установить 2 значения вых.тока 300 и 350мА при допуске±5%• Гальваническая развязка• Коэффициент пульсации ≤ 4%• Гарантия 5 лет

Description 12NC Isolated Dimming Output Voltage Uout max AOC Dimension

Xitanium 40W 0.35A 115V 230V 929001402906 Yes No 80-115 Vdc 120V нет 211x40x30

Xitanium 40W 0.3/0.35A 115V 230V 929001487706 Yes No 70-115 Vdc 120V Переключатель тока 211x40x30

Xitanium 52W 0.3/0.35A 115V 230V 929001487806 Yes No 100-150 Vdc 170V Переключатель тока 211x40x30

211x40x30

Специально для Российского рынка

New!Январь 2019

New!Январь 2019

Фото: образец новых драйверов, не конечный продукт

6

Xitanium iXt industry linear driverRobust LED drivers for industry applications

Features• Longer lifetime 100K hrs @ Tc 75˚C• Improved surge (4kV) • Wide temperature reach: -40˚C to +60˚C• SimpleSet® technology • Low ripple for camera and scanner friendly operation• Central DC operation

Benefits• High reliability underpinned by 5 year warranty• High voltage systems for highest efficiency and lowest cost• Future-proof flexibility• Compatibility


Xitanium 300W 0.5-1.4A 300V iXt TD 230V 929001608406 No TD 100-300 Vdc 300V Programmable, SimpleSet, LEDSet 360x50x28



Xitanium 150W 0.2-0.7A 300V 230V iXt 929001506706 No No 100-300 Vdc 330V SimpleSet, LEDSet 360x30x21

Xitanium 100W 0.15-0.5A 300V 230V iXt 929001506606 No No 100-300 Vdc 330V SimpleSet, LEDSet 360x30x21

360x30x21

Performance

New!

7

StatementXitanium SR industry linear driverRobust SR LED drivers to create connected industry systems

Features• SR technology• Longer lifetime 100K hrs @ Tc 75˚C• Improved surge protection (4kV) • Wide temperature reach: -30˚C to +60˚C• SimpleSet® technology • Low ripple for camera and scanner friendly operation• Central DC operation

Benefits• Integrated power supply over DALI 2.0 to power sensors and

wireless radios directly from the driver, open spec for all OEMs, simplifying integration of sensors into the luminaire

• High reliability underpinned by 5 year warranty• Future-proof flexibility• Compatibility


Xitanium 150W 0.2-0.7A 300V SR 230V iXt 929001540906 No SR 100-300 330V Programmable, SimpleSet, LEDSet 425x30x21

Xitanium 100W 0.15-0.5A 300V SR 230V iXt 929001540806 No SR 100-300 330V Programmable, SimpleSet, LEDSet 425x30x21

425x30x21

8

StatementXitanium SR linear driverSR LED drivers to create connected systems

Features• SR technology• Lifetime 100K hrs (@ Tc 75˚ - 10˚C)• Wide temperature reach: -25˚C to +50˚C• SimpleSet® technology • Low ripple for camera and scanner friendly operation• Central DC operation

Benefits• Integrated power supply over DALI 2.0 to power sensors and

wireless radios directly from the driver, open spec for all OEMs, simplifying integration of sensors into the luminaire

• High reliability underpinned by 5 year warranty• Future-proof flexibility• Compatibility


Xitanium 100W 0.25-0.7A 220V SR 230V 929001540706 No SR 50-220 Vdc 250V Programmable, SimpleSet, LEDSet 360x30x21




Xitanium 75W 0.7-2.0A 54V SR 230V 929001505006 Yes SR 27-54 Vdc 60V Programmable, SimpleSet, LEDSet 360x30x21

Xitanium 36W 0.3-1A_54V SR 230V 929001516306 Yes SR 27-54 Vdc 60V Programmable, SimpleSet, LEDSet 360x30x21

360x30x21


Xitanium SR Bridge built-in 929001546406 No

Xitanium SR Bridge independent 929001546506 No

9

Светодиодные драйверы для наружного и промышленного освещения (IP67)

10

Xitanium driversРазличные семейства для различных потребностей

Xtreme LITE ProgОграниченый набор функций

Настройка через SimpleSetБазовое управление (DynaDimmer, CLO LITE)1-10В или LineSwitchБазовая диагностика

XtremeFULL ProgМаксимальная гибкость

Настройка через SimpleSetВстроенное управление (DynaDimmer, CLO)Универсальный интерфейс (DALI)Управление группой (LineSwitch/AmpDim)Полная диагностика

Одиночное значение тока1-10В

Xtreme Sensor Ready Connected

Xtreme SingleCurrentМинимальная цена

Standalone solutions Connected solutions

Настройка через SimpleSetSR интерфейс и питание 24ВТочное измерение электроэнергииAccurate Energy MeteringВстроенное управлениеРасширенные возможности диагностики

11

Xitanium Xtreme drivers

Xi FP 150W 0.2-0.7A SNLDAE 230V S240 sXt

Функции:S = SimpleSetN = NTC inputL = LineSwitch1 = 1-10V interfaceD = DALI InterfaceA = AmpDimE = DC EmergencyM = Energy MeteringP = Auxiliary Power supply

Тип драйвера:Xitanium (Xi)

Power:Output Power (max)

Дипазано выходного тока на модуль:Output current range (Operating range in Amp for performance)

Входное напряжение:230V = 220-240V

ЗащитаsXt = 100т.ч, Защита 10кВ/6кВ

КорпусI220, S175, C150, S240, (I= IP76, S= Stretched, C=Compact, ### = length)

Семейство драйверов:No Indication = Single Current (одиночное значение тока)LP (LITE Prog) = Драйвер оконного типа (AOC, CLO LITE, DynaDimmer)FP (FULL Prog) = Драйвер оконного типа(AOC, CLO, DynaDimmer)SR (Sensor Ready) = Драйвер оконного типа (AOC, DALI-SR, CLO, DynaDimmer)

12

Benefit Xitanium s. current Xitanium lite prog Xitanium full prog

Reliable

Flexible

Connected

Особенности и преимуществаОсобенность Преимущество Xitanium single

currentXitanium single

current(TWE)

Xitanium Lite Prog Xitanium AOC (Adjustable Output

current)

Надежность Долгий срок службы: < 10% отказов 100 000 50 000 100 000 100 000

Защита от перенапряжения CM / DM 4/ 4 kV 4 / 4 kV 10 / 6 kV 6 / 4 kV

Номинальное входное напряжение 220-240 110-277 220-240 220-240

Гибкость SimpleSet & AOC, окно до 1.5A SimpleSet Потенциометр

DynaDimmer 5-step

Ограничение температуры драйвера (DTL)

Управление 1-10В X X X

LineSwitch

DALI 2.0

Возможность создания сети

SR интерфейс & 24V дополнительное питание

Точное измерение энергии(1%)

Обновлние FW через SR (OTA)

Диагностика Full

Xitanium Xtreme drivers IP67

13

Мощность & Корпус(Ixxx= I - IP67, xxx- длина копуса,IxxxC = I - IP67, xxx- длина копуса,C - коннектор)

Xitanium Single Current Xitanium Single Current (TWE) Xitanium Lite Prog

150W I220/I220C

150W I175/I175C

100W I220/I220C

100W I175/I175C

75W I175

65W I160

40W I160

25W I160

Xitanium drivers IP67– портфолио 2018

Q4 `18

Q1 `19

14

Мощность & Корпус(I= IP66/67 без коннектора, IxxxC= IP66/67 c коннектором)

Single Current Single Current (TWE)

Lite Prog Xitainum AOC

250W I240

220W I220/I220C/I230/ I230C/I240C

200W I250

185W I220

150W I165C/I220

100W I165C/I220

Xitanium drivers IP67– портфолио 2018

Версия без коннектора

Версия с IP коннектором

15

Customer orientedMore flexibility with different cable length

Outdoor Independent Driver(Connector version)

Accessory (Input side)

Accessory (Output side)

Accessory (1-10V Dim side)

16

Accessories- Connector

12NC Description Weight(kg)

Qty/ box (PCS)

Cable length(cm)

Connected with Driver

929001460180 Connector WP F30 Input 0.0394 300 30 Input side



929001460480Connector WP M30 Output 0.0327 300 30 Output Side



929001460780 Connector WP M30 1-10V 0.0327 300 30 1-10V Dim

17

Светодиодные драйверы для наружного освещения IP20

FULL & LITE Programmable

18

Xitanium Xtreme driversУникальные преимущества и особенности

Долгий срок службы

100,000 ч<10% отказов

Защита 10кВ CM и6кВ DM

Легкое проектирование

светильниковЭМС, клеммы

Высокая эффективнос

ть до 93%

Встроенные функции

диммирования:DynaDimmer,

CLO, ..

Цифровые и аналоговые

выходыDALI, 1-10В

Просто шаговое иммирование с

LineSwitch

Легкая настройка и

программирование SimpleSet®

1919

Xitanium basic programmable 12W S 230V C100

Easy fixture integration• Very compact size, fitting with a wide

range of lower lumen outdoor luminaires• Configurable operating window (AOC)• Easy to design-in based on good thermal

and EMI behavior• Designed and released for Class I & II

systems• SELV isolated• Easy and fast wireless programming via

SimpleSet• Compatible with MultiOne Basic for fast

and efficient current setting

Reliable• Robust design: withstanding harsh

Outdoor conditions against moisture, vibration and temperature

• Surge protection 6 / 4 kV (CM / DM)• Lifetime up to 100,000 hours• Ambient temperature ranging from

-40 to + 55 deg C. • Optimized for Philips SLM and other

chip on board LED’s

Total Cost of Ownership• Low initial cost via a global

platform design• Lower maintenance costs due to long

lifetime and high survival rate• 5 years warranty

2020

Основные характеристики

Driver type Power &Housing

Output Current

Dimming (Interface) Lifetime Surge Protection(CM/DM)

Xi BP 12W 0.1-0.5A S 230V C100 12W, C100 0.1-0.5A Non dimmable 100k Hrs, >90% survivors 6 kV / 4 kV

Type SimpleSet AOC Dyna Dimmer ALO DALI CLO OWP MTP AmpDim DTL Diagnostics

BASIC Prog versions Yes Yes - - - - Yes - - - -

Software features

21

Benefit Xitanium s. current Xitanium lite prog Xitanium full prog Xiantium SR

Reliable

Flexible

Connected

Особенности и преимуществаОсобенность Преимущество Xitanium s. current Xitanium lite prog Xitanium full prog Xiantium SR

Надежность Долгий срок службы: 100,000 ч < 10% отказов

X X X X

Защита от перенапряжения CM / DM 4/ 4 kV 10 / 6 kV 10 / 6 kV 8 / 6 kV

Защита сетевого X X X

Димиирование при аварийном режиме DC

150W 165W X X

Гибкость SimpleSet & AOC, окно до 1.5A X X X

DynaDimmer 5-step 5-step 5-step

Ограничение температуры драйвера (DTL)

X X

Управление 1-10В X X

LineSwitch (шаговое диммирование) SL X

DALI 2.0 X X

Возможность создания сети

SR интерфейс & 24V дополнительное питание

X

Точное измерение энергии(1%) X

Обновлние FW через SR (OTA) X

Диагностика Full Full Extended

new

new

new

new

new

new

new

Xitanium Xtreme drivers IP20

22

New introductions Xitanium Xtreme LED DriversPower & Housing(C = Compact, S = Stretched)

XtremeSingle Current / Dimm.

XtremeLite Programmable

XtremeFull Programmable

XitaniumSR

330W C240

165W C170 165W – 2019 Q1

110W C150 110W – 2018 Q4

75/100W C165

70W C150

75W C133 75W + 110W – 2018 Q3 75W (C150) – 2018 Q4

40W C123 40W – 2018 Q4 C133

22W C123 12W – 2018 Q322W – 2019 tbd 12W & 22W in C133

250W Q-can / I220

100W*/150W S240 / Y

65W*/75W S240 / I220

40W S175

22W S175

75W

= Available

10kV

10kV

= New launch / UpgradeDriversXtreme LED

10kV

10kV

10kV

10kV

Upgrade 2018 Q3

Upgradeto C133

10kV

10kV

10kV

10kV

10kV

10kV

10kV

10kV

8kV

10kV

10kV

10kV

10kV

*

*

23

SimpleSet: Simply touch to configureXitanium Xtreme drivers

24

Xitanium LITE Programmable

1-10V settingsAdjustable Output Current (AOC)Constant Light Light Output (CLO LITE)Driver Temperature Limit (DTL)DynaDimmer

Xitanium FULL Programmable

Adjustable Light Output (ALO)AmpDim (Mains Dimming)Adjustable Output Current (AOC)Constant Light Output (CLO)DC-EmergencyDriver Temperature Limit (DTL)DynaDimmerEnd Of Life Indication (EOL)Light Source AgeLineSwitchModule Temperature Protection (MTP)Startup Timer (Smooth light level start)

Programmable feature setXitanium Xtreme drivers – FULL/LITE Programmable

25

Constant Light Output (CLO)Xitanium Xtreme drivers – FULL/LITE Programmable

16 steps programmable of Constant Light OutputDeafault or customizabe linear scheduleLogarithmic or free form creation

Linear version of Constant Light OutputConfigurable planned max. working time (hrs) Configurable initial power level (%)

Xitanium FULL ProgrammableXitanium LITE Programmable

26

Module Temperature Protection (MTP)Xitanium Xtreme drivers – FULL Programmable


To protect your module against over-heating

Free choice to select the used NTC typeSet temperature the MTP starts to dimSet minimum light level

NTC use will remain as feature for the Xi FP drivers


27

Driver Temperature Limit (DTL)Xitanium Xtreme drivers – FULL/LITE Programmable

Xitanium FULL Programmable (potted)Xitanium LITE Programmable (potted)

Driver Temperature Limit feature allows configuration of temperature levels for• Start dimming• Stop dimming (also lowest light level can be set)• Shut down – temperature at which the dim level is set to zero

28

• 5 step Dynadimmer- configurable start and end time- configurable dim level- ability to complete switch-of light

Time based or learned midnight point can be selected as a reference for timekeeping.

Midnight shift to compensate for location

Note: without switch-off for upgraded Xi LP drivers

• 2 step DynaDimmer LITE- configurable start and end time- configurable dim level

Xi LP (upgraded) + Xi FP programmableXitanium lite programmable (earlier 2-step)

DynaDimmerXitanium Xtreme drivers – FULL/LITE Programmable

29

LineSwitch (Step dimming / Sensor)Xitanium Xtreme drivers – FULL Programmable

LineSwitch• High / Low level

Sensor• Integrated switch-off relay

Smooth light• Fade-on / Fade-down timing

Xitanium FULL ProgrammableXitanium LITE Programmable

30

AmpDim (Mains dimming)Xitanium Xtreme drivers – FULL Programmable


For use with conventional mains dimming system, cabinet-based dimming without the need for additional control wires orinfrastructure changes

Set the voltage level the fixture should start to dim lightSet dim level at lowest mains voltage

AmpDim works with constant amplitude reduction and no sinewave waveshape modification

30 Lighting OEM


31

DC Emergency (Central Emergency)Xitanium Xtreme drivers – FULL Programmable


To use your fixture on central emergency lighting

Driver will automatically switch to the configured output di level if DC mains (Battery-mode) is detected.


32

Mains guardXitanium Xtreme drivers – FULL/LITE Programmable

Xitanium FP driversThis built-in Mains guard feature prevents dark spots when the 220-240V mains voltage drops below normal conditions.

To protect the luminaire and the installation from 180V onwards the output power will be limited.

Mains guard works even down to 90 Volt, output power will be limited down to 10%. (see graph)

Mains guard feature will take care the mains current will never exceed 130% of the nominal current at 230V.

Benefits for customers• Light will remain on even at extreme low mains voltage (no dark spot)• Luminaire is fully protected against under voltage• The max input current will be limited to max 130% and therefore

prevents over-current in the installation and tripping of MCB or fuses. • Mains guard is implemented in all Xi FP drivers with production date 1636 or later

• Also implemented in upgraded Xi LP drivers

33

Diagnostics overviewXitanium Xtreme drivers – FULL/LITE Programmable

Diagnostics read outvia SimpleSet for Xi LP driversvia SimpleSet or DALI for Xi FP drivers

Diagnostics includes:• System information:

System burning hours, # system starts, Temperatures, Mains voltage• In-field fault finding:

LED board defect, NTC, Driver temperature• Long period recording displayed in histogram for diagnostics

Xitanium FULL/upgraded LITE ProgrammableDiagnostic LED module voltage (V) LED module current (mA) LED module dim level (%) LED module temperature (ºC) Driver temperature (ºC) System starts System on time (h) Module on time (h) Module energy consumed Short circuit Open circuit Module NTC missing Module temperature reduction active Module temperature too high Mains too low Adjustable Startup Time active

34

Diagnostics overviewXitanium Xtreme drivers – FULL/LITE Programmable

Xitanium FULL/upgraded LITE Programmable Diagnostic LED module voltage (V) LED module current (mA) LED module dim level (%) LED module temperature (ºC) Driver temperature (ºC) System starts System on time (h) Module on time (h) Mains overvoltage countModule energy consumed Short circuit Open circuit Module NTC missing Module temperature reduction active Module temperature too high Mains too low Adjustable Startup Time active

35

Dynadimmer overview

Lighting OEM3

36

Dynadimmer overview 1/4Xitanium Xtreme drivers – Dynadimmer

Dynadimmer is an autonomous dimming control developed by Philipsthat enables simple, pre-programmed customized multistep dimming.

Xi FP: up to five configurable steps, incl. light turn-off

36 Lighting OEM

During Dynadimmer operation the other dimming interface functionalities will be ignored but override is possible in the following ways:Xi FP - via DALI - as soon as the driver detects a DALI frame it will change over from

Dynadimmer mode to DALI mode and remain in DALI mode until the next mains power cycle.Xi FP - via LineSwitch - overrule the Dynadimmer by applying mains voltage to the LineSwitch input

(‘high’ input), results in change over to full light output (only).As soon as the LineSwitch input is changed back to ‘low’, the Dynadimmer will resume operation.

Xi LP SL - via LineSwitch - as above - note Xi LP SL drivers to be phased out.Xi LP S1 - via 1-10V interface – by shorting the +/- terminals of 1-10V by a relay or pulling level below 2V

by a controller.As soon as contact is opened or interface voltage raised above 3.2V, the Dynadimmer will resume operation.

Simultaneous use of Dynadimmer and 1-10V dimming is not possible. These are mutually exclusive.

Xi LP (upgraded): up to five configurable steps, light turn-off not supported

Xi LP (earlier/not upgraded): one configurable step, light turn-off not supported

37


Time based:• starts executing the Dynadimmer profile as soon as power is applied to the driver• does not compensate for seasonal changes• best suited for applications with fixed power-on/off timing

Mid-point/location based:• Based on the average power-on time of the previous periods, the driver calculates

a reference mid-point for the dimming schedule and uses it as a virtual clock.• Relies on a regular power-on time from one night to the next. Typically based on

sunset and sunrise and its duration will vary gradually throughout the seasons.• Dynadimmer calculates the power-on time average of the 5 last preceding stable

nights – implying that after first installation, until virtual clock not calculated (3 nights), dimming schedule can not run, thus Dynadimmer will not dim the light output for the first 3 nights.

Geographical location within a time zone will create difference in sunset and sunrise.This can effect correctness of the calculated virtual clock.To compensate this user can set his geographical location in both western (+) or eastern (-) direction.

Sunset in: Lisabon 19:35 <----> Berlin 19:00 <----> Warsaw 18:25

37 Lighting OEM

38


Dynadimmer attention points• Change in power-on time is more than one hour – driver checks last 5 nights and if

3 identical on-times are found no re-sync. This prevents disruption of the Dynadimmer dimming behavior due to occasional mains black- and brownouts.

• Change in power-on time is less than one hour - represent normal operation. Driver will average the last three power-on times to calculate the virtual clock while gradually adapting dimming schedule to the new power-on time.

• Influence of mains interruption (blackout):• If the mains voltage drops to zero for more than one second – considers as a

new night and will act as if on time changed more than 1 hour (looks for 3 in 5)• If the mains voltage drops to zero for less than a second - Dynadimmer

dimming cycle remains unaffected.

• Influence of mains voltage dip (brownout):• The driver is robust enough to handle a mains voltage dip down to 25VAC for

one minute without disruption of the Dynadimmer timing. Light output will be less or zero for the duration of the mains dip but the dimming schedule will not be affected.

38 Lighting OEM

39


Temporary mains power-off (maintenance at night, blackout):• If power outage occurs within the first 4 hours of the night then a new night will

be calculated on the remaining on-time. Average on-time before the outage will be used as reference thus regular dimming will result.

• If the power outage takes place after more than four hours and not closer thanone hour before the expected end of the night then this deviating on-time will be taken into account to calculate the average power-on time of the five preceding nights. As average for 5 nights is taken it won’t affect the dimming duration of the next night.

• If the outage takes place within one hour before the expected end of the night this will be taken into account as a valid night average power-on time and thus temporarily will affect the dimming behavior.

Temporary mains power-on (maintenance during the day):• If the power-on time is less than four hours then this deviating power-on time will

be ignored and the average power-on time before the deviation will be used as reference. No effect on dimming behaviour for next night.

• If the power-on time is more than four hours and at least one hour less than the average power-on time of the three preceding nights then this deviating power-on time will be taken into account to calculate the average on-time of the five preceding nights. However, it won’t affect the dimming duration of the next night.

39 Lighting OEM

40

Dynadimmer overview – final notesXitanium Xtreme drivers – Dynadimmer

By default the mid position of a time zone will be selected; in most cases this default value will be accurate enough.

The midnight shift option is of course not available when the Time based option has been selected.

Dynadimmer does not compensate for the 1-hour shift in time due to daylight savings time changes in fall and spring.

The Dynadimmer feature does not support 24h applications (e.g. tunnels, warehouses). A power off/on cycle is required every 24 hours.

Dynadimmer operation is not supported when the driver is operated on a DC grid.

40 Lighting OEM

41

42

Surge protection

43

Lightning occurrence and location important to define level of surge protection

Rated impulse voltage withstand levels according IEC 60364-1 : Low voltage electrical installations

NormalNetwork voltage

mS to S X time µS nS µS to mS

Surges induced by switching

ESD could be caused by dry air together with wind :

During lightning storms

Overvoltage (TOV)

TOV, ESD & Lightning events are the most critical for outdoor luminaires

Levels and time expressed here are only indicative. In nature it might be higher.

44

Surge protection class-I (in luminaire)Overview of differences between driver integrated surge protection and external SPD

Xtreme Driver External SPD

Diverting high CM surge currents (kA range) from the LED module and driver

No Yes (additional protection)

Diverting small CM surge currents through LED driver (10 – 100A range) from the LED module

Yes Yes (additional protection)

Rated discharge current (In) & number of pulses --3 kA DM (CM n.a.) min. 40 pulses

10 kA CM/DM min. 1 pulses5 kA CM/DM min. 50 pulses3 kA CM/DM min. 100 pulses

Combined discharge Voltage (Uoc) 10 kV CM, min. 20 pulses (insulation level)8kV CM, min. 80 pulses (insulation level)6 kV/3 kA DM min. 40 pulses (2 Ohm)

20kV/10kA CM min. 1 pulse (2 Ohm)10 kV/10 kA CM min. 1 pulse (1 Ohm)

Recommendation Apply in case of low to medium exposure to lightning and inductive load grid switching

Apply in case of medium to high exposure to lightning

45

Surge protection class-II (in luminaire)Overview of differences between driver integrated surge protection and external SPD

Xtreme Driver External SPD

Diverting high CM surge currents (kA range) from the LED module and driver

No No

Diverting small CM surge currents through LED driver (10 – 100A range) from the LED module

Yes No

Rated discharge current (In) & number of pulses --3 kA DM (CM n.a.) min. 40 pulses

10 kA DM min. 1 pulses5 kA DM min. 50 pulses3 kA DM min. 100 pulses

Combined discharge Voltage (Uoc) 10 kV CM, min. 20 pulses (insulation level)8kV CM, min. 80 pulses (insulation level)6 kV/3 kA DM min. 40 pulses (2 Ohm)

20kV/10kA DM min. 1 pulse (2 Ohm)10 kV/10 kA DM min. 1 pulse (1 Ohm)

Recommendation Apply in case of low to medium exposure to lightning and inductive load grid switching

Apply in case of medium to high exposure to lightning

46

Surge protection class-I: installation level

* Dependig on flash density and uptime requirements

Class I Luminaire

Default Solution(Philips standard)

External SPD(type3 in luminaire)

Installation protection

Sensitivity*

Close to earth

Source exposure

Pole

Conductive or not

Direct & Indirect lightning Static overvoltage

No issueHighLow

Xitanium driver (10kV CM / 6kV DM)


Philips SPD (Xtreme) Class-I

Cascading Protection (e.g. SPD type2 protected mast, SPD type 1 in cabinet)

47

Class II Luminaire

Close to earth

Sensitivity*

Source exposure

Installation protection

External SPD(type3 in luminaire)

Default Solution(Philips standard)

Surge protection class-II: installation level

* Dependig on flash density and uptime requirements** Earth connection is only possible in few countries where the metallic mast must be interconnected to earth whatever the luminaire class is


Philips SPD (Xtreme) Class-I +Connect SPD GND output to earth of

the installation** (CM)

Cascading Protection (e.g. SPD type2 protected mast, SPD type 1 in cabinet)

Pole

Conductive

Direct and indirect lightning

Staticovervoltage

No issueHigh

Insulated

StaticovervoltageIndirect lightning

No issue High

Bleeder Resistors or other staticdischarging solution

Bleeder Resistors or other staticdischarging solution

Cascading Protection and bleederresistors

48

White paperThe challenges of surge protection

Availablenow

49

Documents

Источники питания - Компэл...• OEM Technical downloads • OEM Technical downloads (IP67 Family) – Datasheets, Certificates, CAD files – Design-in guides