Upload
murali-krishna
View
216
Download
0
Embed Size (px)
Citation preview
8/6/2019 003murali
1/5
NAPRO SCIENTIFIC
6, Vaidehi Residency, MIT College Road, Rambaug Colony, Kothrud, Pune 411 038, IndiaTel. : 91-20-25460214 E-mail: [email protected] URL : http://www.napro.co.in
QuotationQuotationQuotationQuotation
Kind Attn.: Mr. Murali Krishna
Quotation Enquiry
Number 003/10-11 E-mail
Date 05/04/2010 25/03/2010
Due Date ---
We thank you for your above enquiry, & are pleased to quote as under:We thank you for your above enquiry, & are pleased to quote as under:We thank you for your above enquiry, & are pleased to quote as under:We thank you for your above enquiry, & are pleased to quote as under:----
# Item 20 litre 30 litre 40 litre
Napro make in-situ sterilizable bioreactor for solidstate fermentation :-
1. Basic model (anaerobic) :-1. Vessel :- Rs.2,08,066.00 Rs.2,22,984.00 Rs.236,873.00
1.1. MOC SS304 with structural support in MS1.2. Working volume upto 50% of total capacity,
assuming mass density of feed as 0.7-0.9gm/cc
1.3. Non-jacketed horizontal drum type vessel,suitable for in-situ steam sterilization inempty condition, at 10-15 psig pressure
1.4. Slow speed drum rotation for uniform mixingof the mass
1.5. Ports for various operations (air sparging, airexhaust, inoculum addition, substratecharging, discharge, steam inlet, etc.)
1.6. Sparger pipe for sparging of air into the bed1.7. Pressure gauge provided on chamber for
monitoring sterilization pressure
2. Drive assembly for agitator :-2.1. Rugged industrial grade AC/DC motor2.2. Reduction gear box for upto 30 RPM output2.3. Motor mounting arrangement with direct
shaft coupling2.4. Variable speed drive for speed variation
between 6-30 RPM2.5. Panel-mounted digital RPM indicator
3. Temperature measurement system :-3.1. RTD Pt-100 temperature sensor located
inside the bed3.2. Panel-mounted digital temperature indicator,
range 0.0-199.9 OC3.3. Facility for automatic in-situ empty
sterilization cycle provided
Continued on next page
8/6/2019 003murali
2/5
Continuation Sheet - 2
# Item 20 litre 30 litre 40 litre
4. Control panel :-4.1. Control panel box fabricated from CRCA
sheet, powder coated4.2. Provided with electrical switchgear, panel
accessories & mounting arrangements forvarious panel-mounted instruments
5. Skid :-5.1. All the above items will be mounted on an MS
powder coated skid/stand5.2. Skid/stand will be suitable for floor mounting
without any rigid foundation
Following accessories can be supplied at extra cost, ifrequired :-
2. Aeration control system (for aerobic cultures) :- Rs.36,559.00 Rs.38,804.00 Rs.40,548.00
1. Oil-free mini air compressor2. Air flow rotameter with manual flow control valve3. Mini air filter for air inlet, 1 micron rating
3. Air heating & humidification system :- Rs.57,438.00 Rs.57,782.00 Rs.58,064.001. Air humidification tank in SS304, capacity 5 litres,
with nozzles for air inlet, air outlet, water filling,overflow & drain
2. Air heating tank in SS304, capacity 5 litres, with kW air heater, & nozzles for air inlet, air outlet &temperature sensor
3. RTD Pt-100 temperature sensor4. Panel-mounted digital on/off type temperature
controller5. Airflow piping with bypass arrangement & ball
valves6. Temperature control range ambient (25 OC) upto 60
OC7. Humidification range ambient upto 95% RH
4. Temperature + humidity measurement system :- Rs.49,985.00 Rs.49,985.00 Rs.49,985.001. Combined temperature + humidity sensor located at
air exhaust nozzle2. Panel mounted combined temperature + humidity
indicator, temperature range 0.0-199.9 OC,humidity range 0-95%
5. Portable hand-held gaseous oxygen monitor, range 0-21%
Rs.67,253.00 Rs.67,253.00 Rs.67,253.00
Continued on next page
8/6/2019 003murali
3/5
8/6/2019 003murali
4/5
Continuation Sheet - 4
ANNEXURE I
TERMS & CONDITIONS
1. PRICE :-The prices quoted are unpacked, ex-works, Pune.
2. PACKING & FREIGHT CHARGES :- Packing extra @ 5% of the basic total. Freight extra at actuals.
3. EXCISE DUTY :-Nil.
4. SALES TAX :- Within Maharashtra :-
M.V.A.T. extra @ 12.5% or as applicable on the date of dispatch. Outside Maharashtra :-
C.S.T. extra @ 12.5%. In case customer can issue appropriate concessional form for availing sales
tax concession, difference amount in sales tax charged will be refunded to customer if the saidconcessional form is received by us within 3 months from date of our invoice.
5. UNLOADING CHARGES :-Unloading charges at customers site will be to customers account.
6. TRANSIT INSURANCE CHARGES :-Extra at actuals; otherwise Nil in case insurance cover is arranged by customer.
7. OCTROI/ENTRY CHARGES :-Extra at actuals.
8. TERMS OF PAYMENT :- 50% advance along with Purchase Order; Balance along with all taxes, duties & other payables against Proforma Invoice prior to dispatch of
material, after inspection by customer at our Works.
Only current-dated cheques or demand drafts drawn on any nationalized or reputed bank will be accepted.The cheques or demand drafts should be payable at par at Pune. Goods will be dispatched only afterrealization of the cheques or demand drafts. Post-dated cheques will not be accepted under anycircumstances.
9. DELIVERY SCHEDULE :-Within 12-14 weeks from date of receipt of techno-commercially clear & confirmed purchase order or date ofreceipt of advance, whichever is later.
10. SCOPE OF SUPPLY :-As per technical specifications detailed in the quotation. Customer must sign & return to us, their acceptanceof the above specifications & scope of supply, along with their purchase order.
11. PRE-DISPATCH INSPECTION :-By customer at our Pune office/works before dispatch. Material will be dispatched only after obtainingdispatch clearance from customer. Requests for subsequent modifications/alterations will not beentertained.
Factory Acceptance Test / Third Party Inspection / Validation (including IQ, OQ, PQ etc.) willnot be permissible.
12. INSTALLATION :-By us at no extra charges. Local hospitality for two persons to be provided by customer free of cost to us.
13. VALIDITY :-
8/6/2019 003murali
5/5
Continuation Sheet - 5
The offer is open for acceptance for 60 days from the date of offer, & thereafter subject to our writtenconfirmation.
14. WARRANTEE :-The system will have a limited carry-in warranty for 12 months from the date of dispatch, formanufacturing defects only. We reserve the right to repair or replace, at our discretion, components that arefound to be defective, during the warrantee period. Material found faulty by the customer to be sent back tous at customers cost & risk, for assessment & subsequent repair or replacement. On-site warrantee &free service warrantee will not be provided.
15. NEGOTIATIONS :-Prices & terms quoted herein are firm & not negotiable.
16. PURCHASE ORDER TERMS :-Tender or purchase order terms such as earnest money deposit, security deposit, performance bankguarantee etc. are not acceptable to us.
For Napro Scientific
Authorized Signatory