Upload
kevin-windsor
View
209
Download
2
Embed Size (px)
Citation preview
Bio - Pharm Range
Product: StainlessSteelfittingscomplywithASMEBPEstandards.GasketsaremadefromcompoundswhichareFDAapprovedandUSP87,88PharmaceuticalClassVIcertified.
Sizes: StainlessSteelfittingsareavailableinsizes½"-6"O.D.tubesize.
Material: FittingsarefabricatedinANSI316LStainlessSteelwithsulphurcontentof0.005-0.017%achievingsuperiorrepeatabilityforautomaticorbitalweldingprocess.
Dimensions & Tolerances: DimensionsasspecifiedinASMEBPEPartDT.
Marking: Eachfittingismarkedwiththefollowing–HeatNo°/JobNo°/MaterialGrade/Standard/SurfaceFinish/BrandName
Surface Finish: Reference:ASMEBPEPartSF,tableSF-3.
Fittings Specifi cations
Packaging: Eachfittingiscapped,baggedandlabeledinfullcompliancewiththeASMEBPEstandard.
Documentation: FullMaterialTestReportsaresuppliedwiththefinishedproductsandareavailableOn-Lineatwww.MaxPure.net
Surface BPE Surface Finish Code Designation µ-in. µmPX SF0 Unpolished LightPolish
PC SF1 20 0,51 MechanicallyPolished LightPolish
PL SF1 20 0,51 MechanicallyPolished Mechanicallypolished to32Raµ-in.
PD SF4 15 0,38 MechanicallyPolished& LightPolish Electropolished
PR 10 0,25 MechanicallyPolished& Mechanicallypolished Electropolished to32Raµ-in.
PM SF4 15 0,38 MechanicallyPolished& Mechanicallypolished Electropolished to32Raµ-in.
Inside SurfaceRa Maximum Surface Treatment
Outside SurfaceSurface Treatment
Bio-PharmRange
3
Surface BPE Surface Finish Code Designation µ-in. µmPX SF0 Unpolished LightPolish
PC SF1 20 0,51 MechanicallyPolished LightPolish
PL SF1 20 0,51 MechanicallyPolished Mechanicallypolished to32Raµ-in.
PD SF4 15 0,38 MechanicallyPolished& LightPolish Electropolished
PR 10 0,25 MechanicallyPolished& Mechanicallypolished Electropolished to32Raµ-in.
PM SF4 15 0,38 MechanicallyPolished& Mechanicallypolished Electropolished to32Raµ-in.
Standards: ∙ASTMA-269/A270S2∙ASMEBPE
Surface Finish: Surfacefinishspecificationsarethesameforfittings&tubes.PleaserefertotableSF-3onpage3.
Tubing Dimension & Tolerances: Tubingspecifications,ASTMA-269/A270S2
Tube Specifi cations
O.D. Gauge O.D. Dimensional Length Wall Thickness Tubing Diameter (wall thickness) Specifi cation Size & TolerancesInch mm Inch mm ASTMSpec. ASTMSpec. ASTMSpec.½" 12,7 16G +.005/-.005 +1/8 0.065+/-10% (.065"/1,65mmwall)
¾" 19,0 16G +.005/-.005 +1/8 0.065+/-10% (.065"/1,65mmwall)
1" 25,4 16G +.005/-.005 +1/8 0.065+/-10% (.065"/1,65mmwall)
1½" 39,1 16G +.008/-.008 +1/8 0.065+/-10% (.065"/1,65mmwall)
2" 50,8 16G +.008/-.008 +1/8 0.065+/-10% (.065"/1,65mmwall)
2½" 63,5 16G +.010/-.010 +1/8 0.065+/-10% (.065"/1,65mmwall)
3" 76,2 16G +.015/-.015 +1/8 0.065+/-10% (.065“/1,65mmwall)
4" 101,6 14G +.015/-.015 +3/16 0.083+/-10% (.083"/2,11mmwall)
6" 152,4 10,4G +.030/-.030 +3/16 0.0109+/-10% (.109"/2,77mmwall)
Bio-PharmRange
Elbows 90°
Type Dimension Qualities TE2S-90°Elbow ½"-6" 316L
TE2C-90°Elbow ½"-6" 316L Clamponeend
TEG2S-90°Elbow ½"-6" 316L
Elbows 45°
Type Dimension Qualities TE2KS-45°Elbow ½"-6" 316L
TE2KC-45°Elbow ½"-6" 316L Clamponeend
TEG2K-90°Elbow ½"-6" 316L
Type Dimension Qualities TE7WWW-Tee ½"-6" 316L
TEG7-Tee ½"-6" 316L
Type Dimension Qualities TE7WWCS- ½"-6" 316L shortoutletTee
TEG7S- ½"-6" 316L shortoutletTee
TE7WCSW- ½"-6" 316L shortoutletruntee
Bio-PharmRange
DT-7
DT-12
DT-16
DT-8
DT-13
DT-17
5
Tees Symmetic
Type Dimension Qualities TE7WWW-Tee ½"-6" 316L
TEG7-Tee ½"-6" 316L
Tees - Short Outlet
Type Dimension Qualities TE7WWCS- ½"-6" 316L shortoutletTee
TEG7S- ½"-6" 316L shortoutletTee
TE7WCSW- ½"-6" 316L shortoutletruntee
Bio-PharmRange
DT-9
DT-18
DT-15
DT-27
DT-25
Tee Reducing
Type Dimension Qualities TE7RWWW- ¾"/½"upto 316L ReducingTee 6"/4"
TEG7R- ¾"/½"upto 316L ReducingTee 6"/4"
TE7RWWCS ¾"/½"upto 316L shortoutletreducingTee 6"/4"
TEG7RS ¾"/½"upto 316L shortoutletreducingTee 6"/4"
Type Dimension Qualities TE31WW- ⅜"/¼"upto 316L concentricreducer 6"/4"
TE31CW- ¾"/½"upto 316L concentricreducer 6"/4"
TEG31CC- ¾"-½"upto 316L concentricreducer 6"/4"
Type Dimension Qualities TE32WW- ⅜"/¼"upto 316L eccentricreducer 6"/4"
TE32CW- ¾"/½"upto 316L eccentricreducer 6"/4"
TEG32CC- ¾"/½"upto 316L eccentricreducer 6"/4"
Bio-PharmRange
DT-10
DT-19
DT-14
DT-20
7
Reducers - Concentric
Type Dimension Qualities TE31WW- ⅜"/¼"upto 316L concentricreducer 6"/4"
TE31CW- ¾"/½"upto 316L concentricreducer 6"/4"
TEG31CC- ¾"-½"upto 316L concentricreducer 6"/4"
Reducers - Eccentric
Type Dimension Qualities TE32WW- ⅜"/¼"upto 316L eccentricreducer 6"/4"
TE32CW- ¾"/½"upto 316L eccentricreducer 6"/4"
TEG32CC- ¾"/½"upto 316L eccentricreducer 6"/4"
Bio-PharmRange
DT-11
DT-26
DT-21
DT-11
DT-26
DT-21
Ferrules
Type Dimension Qualities TEG14AM7 ½"-6" 316L ClampFerrulelong
TEG14BM7 ½"-6" 316L ClampFerrulemedium
TEG2CS ½"-6" 316L ClampFerruleshort
End Caps, Caps and Gaskets
Type Dimension Qualities TEG16A ½"-6" 316L SolidEndCap
TE16W ½"-6" 316L Cap
TEG40 ½"-4" PTFE,VITON®,Buna,Silicone, EPDMandTUF-STEEL, Envelopetype-Telefonwith EPDMFiller,Teflonwith VITON®Filler,
Type Dimension Qualities 13MHHMD-DoubleHinged 1½"-4" 316 HeavyDutyClamp
13MHHM- ½"-6" 304 HeavyDutyClamp
13MHHM-H ½"-6" 304 HeavyDutyClamp
13MHHS-ThreePiece 1½"-4" 304 HeavyDutyClamp
13MHP- ½"-6" 316 HighPressureClamp
Bio-PharmRange
DT-22
DT-22
DT-22
DT-31
DT-30
9
Clamps
Type Dimension Qualities 13MHHMD-DoubleHinged 1½"-4" 316 HeavyDutyClamp
13MHHM- ½"-6" 304 HeavyDutyClamp
13MHHM-H ½"-6" 304 HeavyDutyClamp
13MHHS-ThreePiece 1½"-4" 304 HeavyDutyClamp
13MHP- ½"-6" 316 HighPressureClamp
(WingNutWithHole)
Bio-PharmRange
BioConnect® - High Purity Tube Connection-Optimizedrecesscontour(patentapproved)
-Highestcompressionpoweratthetransitionstowettedareaspreventsdirt andgermsgettingintothesealingspace(seeASME-BPE,Ch.SD-3.7.2and3.7.6)
-Definedexpansionpocketsexcludesdangerous“escalatoreffect”betweenwetted areaandelastomerseat(seeASME-BPE,Ch.SD-3.7.2)
-Self-drainingevenafterexpansionofsealduetohightemperatureoperation(seeASME-BPE,Ch.SD-3.7.7)
-Metal-to-metal-stopavoidsstressorovercompressionofgaskets(O-ring)(seeASME-BPE,Ch.SD-3.7.8)
-NominalPressurePN16(DN6-DN100,½''-4'')
Bio-PharmRange
11
Connect S® - a Unique Solution without Elastomer Gasket-Optimalrecesscontouranddesignofthesealingmetallicsurface(patentapproved)
-Excellentcleanability
-TestedbyFrauenhofer-InstitutforGrenzflächen-undBioverfahrenstechnik
-Hermetictightnessevenunderrepeatedtemperaturechanges
-Definedpre-stressingonthemetallicsealingsurface
-Nogasket-noelevatoreffect
-Protectionofthesealingcontouragainstdamage
-Axialpositioningbymetal-to-metal-stop
-Exactpositioningbycentralguidance
-Materialgrade1.4435/316L;othergradesonrequest
-WettedareaswithroughnessRa<0,8µm(Ra<0,5µmondemand)
-Dimensionsacc.ASME-BPE,DIN11866,DIN11850,ISO1127
-MaterialTestReportaccordingEN10204-3.1(onrequestAD2000W2)
-Approvalforpressureapplication:issuedbyTÜVGermany(Süddeutschland)
a)NominalPressure: PN16(DN6untilDN50) PN10(DN65untilDN100) PN100(DN6untilDN40,highpressure-asepticconnection)
Bio-PharmRange
NEUMO Budapest Kft. (Hungary)
NEUMO Mühendislik ve (Turkey)
EGMO Ltd. (Israel)
NEUMO Representative Offices Vietnam
NEUMO VARGUS (China)
Armaturenwerk Hötensleben GmbH (Germany)
AWH Vienna (Austria)
AWH Lyon (France)
Gebr. Rieger GmbH & Co. KG (Germany)
NEUMO GmbH & Co. KG (Germany)
Damstahl GmbH & Co. KG (Germany)
NEUMO UK Ltd. (United Kingdom)
VNE Corporation (USA)
Damstahl AG (Switzerland)
Herrli AG (Switzerland)
NEUMO-EGMO Spain SL (Spain)
NEUMO Polska Sp. z.o.o. (Poland)
NEUMO GUS (Russia)
Damstahl AB (Sweden)
Damstahl a/s (Denmark)
Damstahl a/s (Norway)
NEUMO GUS Kransodar (Russia)
NEUMO-Ehrenberg-Gruop
NEUMOUKLtd.Halesfield4TelfordShropshireTF74APTel.:+441952583999Fax:+441952583958e-mail:[email protected]://www.neumo.co.uk