Cac Lenh Trong Moshell

get + proxy/LDN c

get + proxy/LDN ca MOxem c tnh (attribute) ca MOset

action

moshell

log vo RNC

moshell

log vo RBS

lt all: ly v ton b cy cu trc MO. LDN ca mi MO trong cy MO c cp mt proxy v c lu trong b nh Moshell.RNC> lst cell=hc1342 trng thi cell

RBS> ala

cnh bo tm tt RBS> al

cnh bo chi tit

RNC> eur c 1087

xem user NodeBRNC> uer

xem user RNC

RBS, RNC> cab

RBS> get radio

RNC> lst utrancell

xem trng thi cc cell, knh ca cell trong ton RNCRNC> lst

xem trng thi cc cell, knh, IubLink ca NodeB

RNC> lst cell=hc1456xem trng thi cc cell, knh ca NodeB

Rbs> cvls

CV backup handling: list, make local, make remote, remove, setstartable.

Rbs> lst Iub

RBS> get IpInterface/proxy

xem Vlan, Default Router ca NodeB

RBS> acc IpInterface/proxy ping

ping t NodeB, nhp vo Defaut Router IPRBS> get ipacc/IpAccessHostEt

xem FE IP v trng thi hot ng

RNC, RBS> lga

xem log cnh boRBS> cabx

xem cc card v trng thi n LedRNC> str[12ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).

RNC> lk/llk View all MO's linked to an MO, and their states (admState

and opState).

RNC> lk Iub_hc1048

xem tn cng ATM, trang thi Iub, cc cell ca hc1048.RNC> get AtmPort=ES1-18-3-2 xem trng thi cng ATMRNC> lpget

kim tra cht lng E1 nu currentPmRegister pmUas thay i tng lin tc (10s kim tra mt ln) th E1 cht lng km.RNC, RBS> uer i imsi

trace cuc gi ca thu bao trong RNC hay RBS

RNC> lst ms.*pp1.*RNC> lst es.*pp1.*Rbs> acc/lacc 0 manualrestart

restart NodeBRNC> st Aal2PathVccTp

xem Aal2 trn UP (Aal2 Path and Virtual Circuit Connection Termination Point)RNC> st Aal5TpVccTp

xem Aal5 trn CP (AAL5 Termination Point and Virtual Circuit Connection Termination Point)get proxy or full LDNlget partly LDN

get Equipment=1,Subrack=MS,Slot=4,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 tng ng vilget Subrack=MS,Slot=4,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1

get Lac/LocationArea

xem LAC

get RoutingArea

xem RAC

get utrancell primaryScramblingCodely PSC ca cell

HCRNC10> h lhsh

Following commands match that word in the command description (type "h " for more info on each command):

tg[r][c][d] Print Resource Object information for all MOs in LmCell (RNC only).

ose/coli command Send a COLI command to the node's OSE shell. Type "h ose" for syntax help and "?" to view available commands.

proglist/progkill List or restart programs on boards or board groups.

10.210.13.49> lt all

100205-16:29:27 10.210.13.49 7.1t stopfile=/tmp/21224

Checking MOM version...RBS_NODE_MODEL_L_10_9

Parsing MOM (cached): /var/opt/ericsson/amos/jarxml/RBS_NODE_MODEL_L_10_9.xml.cache.gz ................................................Done.

Fetching IOR file...Done.

Connecting to 10.210.13.49:56834 (CorbaSecurity=OFF, corba_class=2, jarcorb=R61HH01, jacsec=R61HH01, jacoms=R61HH06)

**** Welcome to the Simple Mo Browser (version 3.0)!

Trying file=/var/opt/ericsson/amos/moshell_logfiles/saigon/logs_moshell/tempfiles/20100205-162845_21178/ior21178

**** Test Construction OK

****

$mobrowser_pid = 21280

Connected to 10.210.13.49 (SubNetwork=ONRM_ROOT_MO_R,SubNetwork=HCRNC01,MeContext=HC1036,ManagedElement=1)

Connected to 10.210.13.49 (SubNetwork=ONRM_ROOT_MO_R,SubNetwork=HCRNC01,MeContext=HC1036,ManagedElement=1)

Last MO: 1115. Loaded 1115 MOs. Total: 1116 MOs.

HC1036>

HC1036> cvls

100205-16:32:23 10.210.13.49 7.1t RBS_NODE_MODEL_L_10_9 stopfile=/tmp/21224

===================================================================================

100205-16:32 CV Name Upgrade Package Release

===================================================================================

Startable: Final_Parameter_setting_040210_1155 CXP9012959/1_R9AF03 P7

Loaded: Final_Parameter_setting_040210_1155 CXP9012959/1_R9AF03 P7

Executing: Final_Parameter_setting_040210_1155 CXP9012959/1_R9AF03 P7

Last created: Final_Parameter_setting_040210_1155 CXP9012959/1_R9AF03 P7

-------------------------------------------------------------------------------------------------------------------

Current UpgradePkg: UpgradePackage=CXP9012959_R9AF03 CXP9012959/1_R9AF03 P7

AutoCreatedCV: Disabled

Rollback status: Rollback is off

Rollback init timer: 30

Rollback init counter: 2

===================================================================================

UP name ProductData CVs LMs PrDate LastCV state Release CompatIndex

===================================================================================

InitialUP 0_0 0 0 0 IDLE, ONLY_DELETEABLE

CXP9012959_R9AF03 CXP9012959/1_R9AF03 18 357 090513 100204 IDLE, UPGRADE_COMPLETED P7 CXP9012959-R9_04

===================================================================================

CV Name Creation Date Package/Release Type Operator Comment

===================================================================================BasicCV_CXP9013009%2_R1D09 2009-05-13 13:03 CXP9012959/1_R9AF03 P7 other unknown Basic CV CXP9013009/2-R1D09

INITIAL_CV 2009-09-08 07:54 CXP9012959/1_R9AF03 P7 other unknown none

OAM_CXP9012959_1_R9AF03_091007_030223 2009-10-06 20:02 CXP9012959/1_R9AF03 P7 other RBS EM Oam Wizard

SITE_CXP9012959_1_R9AF03_091007_030340 2009-10-06 20:03 CXP9012959/1_R9AF03 P7 other RBS EM Site Equipment Wizard

LEO_CXP9012959_1_R9AF03_091007_030340 2009-10-06 20:07 CXP9012959/1_R9AF03 P7 other unknown none

post_key_loaded 2009-10-08 17:32 CXP9012959/1_R9AF03 P7 other ehungth none

Op_CXP9012959_R9AF03_111009_1804 2009-10-11 10:04 CXP9012959/1_R9AF03 P7 other elaulap parameter settings

Op_CXP9012959_R9AF03_091113_1601 2009-11-13 08:59 CXP9012959/1_R9AF03 P7 other exupham none

Op_CXP9012959_R9AF03_091121_1350 2009-11-21 06:48 CXP9012959/1_R9AF03 P7 other etuanph none

Op_CXP9012959_R9AF03_231109_1524 2009-11-23 08:24 CXP9012959/1_R9AF03 P7 other elaulap set_queueSelectAlgorithm

Op_CXP9012959_R9AF03_041209_0949 2009-12-04 02:48 CXP9012959/1_R9AF03 P7 other elaulap parameter settings

Op_CXP9012959_R9AF03_160110_1600 2010-01-17 08:57 CXP9012959/1_R9AF03 P7 other enhangu before change Iub vid_ipaddress

Op_CXP9012959_R9AF03_160110_1638 2010-01-17 09:35 CXP9012959/1_R9AF03 P7 other enhangu after change vid

add_ntpServerAddressPrimary_250110_1634 2010-01-26 09:30 CXP9012959/1_R9AF03 P7 other qjiygan none

add_ntpServerAddressPrimary_270110_1704 2010-01-27 10:06 CXP9012959/1_R9AF03 P7 other qjiygan none

set_numHsCodeResources 2010-01-29 02:42 CXP9012959/1_R9AF03 P7 other eolingo none

CXP9012959_R9AF03_100204_1110 2010-02-04 04:14 CXP9012959/1_R9AF03 P7 other ekynguy none

Final_Parameter_setting_040210_1155 2010-02-04 04:57 CXP9012959/1_R9AF03 P7 other rncteam parameter settings

===================================================================================>>> Total: 18 CV's, 2 UP's

CTRNC11> lst cell=hg5303

100205-16:11:59 10.204.103.148 7.1t RNC_NODE_MODEL_K_9_105 stopfile=/tmp/17776

===================================================================================

Proxy Adm State Op. State MO

===================================================================================

5734 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,UtranCell=HG53032

5737 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,UtranCell=HG53032,Fach=1

5744 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,UtranCell=HG53032,Hsdsch=1

5749 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,UtranCell=HG53032,Pch=1

5759 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,UtranCell=HG53032,Rach=1











===================================================================================

Total: 15 Mos

CTRNC11> lst HG5303


================================================================================

Proxy Adm State Op. State MO

================================================================================

5385 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,IubLink=Iub_HG5303

5386 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,IubLink=Iub_HG5303,NbapDedicated=5303

5387 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,IubLink=Iub_HG5303,NbapCommon=5303

5388 1 (ENABLED) RncFunction=1,IubLink=Iub_HG5303,NodeSynch=1
















================================================================================

Total: 19 MOsHCRNC01> lk Iub_hc1019


.................................................................................

===================================================================================

Proxy Adm State Op. State MOs linked to 8865:IubLink=Iub_HC1019

===================================================================================

5868

Equipment=1,Subrack=ES-1

21993

1 (ENABLED) RncFunction=1,RncModule=ES-1-2-0

26283

RncFunction=1,LocationArea=LAC_20011

12473 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,UtranCell=HC10191



8865 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,IubLink=Iub_HC1019

8866 1 (UNLOCKED)1 (ENABLED) RncFunction=1,IubLink=Iub_HC1019,NbapCommon=1019

8868 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,IubLink=Iub_HC1019,NbapDedicated=1019

8867

1 (ENABLED) RncFunction=1,IubLink=Iub_HC1019,NodeSynch=1

3951

TransportNetwork=1,Aal2RoutingCase=384000100001019

751

1 (ENABLED) TransportNetwork=1,Aal2Sp=1,Aal2Ap=AAL2AP_b1019

752 TransportNetwork=1,Aal2Sp=1,Aal2Ap=AAL2AP_b1019,Aal2PathDistributionUnit=1

8504

1 (ENABLED) IpOam=1,Ip=1,IpAtmLink=b1019ia

2856 1 (UNLOCKED) 1 (ENABLED) TransportNetwork=1,Aal2PathVccTp=b1019aal2_1

1336

1 (ENABLED) TransportNetwork=1,UniSaalTp=b1019ca

867

1 (ENABLED) TransportNetwork=1,UniSaalTp=b1019cb

2699

1 (ENABLED) TransportNetwork=1,UniSaalTp=b1019da

2200

1 (ENABLED) TransportNetwork=1,UniSaalTp=b1019db

2437

1 (ENABLED) TransportNetwork=1,UniSaalTp=b1019qa

2795

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b1019ca

3303

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b1019cb

379

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b1019da

1277

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b1019db

286

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b1019ia

2127

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b1019qa

1094 1 (ENABLED) TransportNetwork=1,AtmPort=ES1-18-3-2,VplTp=vp1,VpcTp=1,VclTp=vc32







8532 1 (UNLOCKED) 1 (ENABLED) IpSystem=1,IpAccessHostPool=Iub

===================================================================================

Total: 34 MOs

Added 34 MOs to group: lk_group

HCRNC01> get AtmPort=ES1-18-3-2


==============================================================================

1086 TransportNetwork=1,AtmPort=ES1-18-3-2

==============================================================================

AtmPortId ES1-18-3-2

availabilityStatus 0 (NO_STATUS)

hecCorrectionMode true

loopbackDetection 0 (DISABLED)

operationalState 1 (ENABLED)

userLabel ES1-18-3-2

uses

Subrack=ES-1,Slot=18,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=ES1-18-3,Vc4Ttp=1,Vc12Ttp=2,E1Ttp=1

valueOfLastCellWithUnexp Struct{3}

>>> 1.vpi = 0

>>> 2.vci = 0

>>> 3.pti = 0

HCRNC03> lpget Subrack=ES-1,Slot=19,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=pp2, Vc4Ttp=1,Vc12Ttp=4,E1Ttp=1100208-13:03:39 10.210.64.148 7.1t RNC_NODE_MODEL_K_9_105 stopfile=/tmp/2617

===================================================================================MO Attribute Value

===================================================================================

Subrack=ES-1,Slot=19,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=pp2,Vc4Ttp=1,Vc12Ttp=4,E1Ttp=1 currentPmRegister s[3] = pmEs=0 pmUas=1427 pmSes=0

Subrack=ES-1,Slot=19,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=pp2,Vc4Ttp=1,Vc12Ttp=4,E1Ttp=1 pmEs 0

Subrack=ES-1,Slot=19,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=pp2,Vc4Ttp=1,Vc12Ttp=4,E1Ttp=1 pmSes 0

Subrack=ES-1,Slot=19,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=pp2,Vc4Ttp=1,Vc12Ttp=4,E1Ttp=1 pmUas 1427

===================================================================================Total: 1 MOsHCRNC06> lk iub_bt2401

100208-11:28:12 10.204.108.148 7.1t RNC_NODE_MODEL_K_9_105 stopfile=/tmp/316..............................

==============================================================================

Proxy Adm State Op. State MOs linked to 10816:IubLink=Iub_BT2401

==============================================================================

3232

Equipment=1,Subrack=ES-1

10252

1 (ENABLED) RncFunction=1,RncModule=ES-1-8-0

6340

RncFunction=1,LocationArea=LAC_20062

13289 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,UtranCell=BT24011

11816 1 (UNLOCKED)1 (ENABLED) RncFunction=1,UtranCell=BT24012

10590 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,UtranCell=BT24013

10816 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,IubLink=Iub_BT2401

10817 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,IubLink=Iub_BT2401,NbapCommon

10819 1 (UNLOCKED) 1 (ENABLED) RncFunction=1,IubLink=Iub_BT2401,NbapDedica

10818

1 (ENABLED) RncFunction=1,IubLink=Iub_BT2401,NodeSynch=1

1127

TransportNetwork=1,Aal2RoutingCase=384000600002401

392

1 (ENABLED) TransportNetwork=1,Aal2Sp=1,Aal2Ap=AAL2AP_b2401

393 TransportNetwork=1,Aal2Sp=1,Aal2Ap=AAL2AP_b2401,Aal2PathDistributionUnit=1

6275

1 (ENABLED) IpOam=1,Ip=1,IpAtmLink=b2401ia



985

1 (ENABLED) TransportNetwork=1,UniSaalTp=b2401ca

587

1 (ENABLED) TransportNetwork=1,UniSaalTp=b2401da

1181

1 (ENABLED) TransportNetwork=1,UniSaalTp=b2401qa

609

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b2401ca

147

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b2401da

1213

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b2401ia

825

1 (ENABLED) TransportNetwork=1,Aal5TpVccTp=b2401qa

1270 1 (ENABLED) TransportNetwork=1,AtmPort=ES1-18-2-ima1,VplTp=vp1,VpcTp=1,VclTp=vc32






===================================================================================

Total: 29 MOs

Added 29 MOs to group: lk_groupHCRNC06> get AtmPort=ES1-18-2-ima1


===================================================================================

1267 TransportNetwork=1,AtmPort=ES1-18-2-ima1

===================================================================================

AtmPortId ES1-18-2-ima1


hecCorrectionMode true

loopbackDetection 0 (DISABLED)


userLabel ES1-18-2-ima1

uses ImaGroup=ES1-18-2-ima1

valueOfLastCellWithUnexp Struct{3}

>>> 1.vpi = 237

>>> 2.vci = 17474

>>> 3.pti = 0

===================================================================================

Total: 1 MosCRNC06> get ImaGroup=ES1-18-2-ima1


===================================================================================

1092 TransportNetwork=1,ImaGroup=ES1-18-2-ima1

===================================================================================

ImaGroupId ES1-18-2-ima1

activeLinks 4



physicalPortList [4] =

>>> physicalPortList = Equipment=1,Subrack=ES-1,Slot=18,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=pp2, Vc4Ttp=1,Vc12Ttp=1,E1Ttp=1




requiredNumberOfLinks 4

reservedBy AtmPort=ES1-18-2-ima1

userLabel ES1-18-2-ima1

=====================================================================================

Total: 1 MOs

HC1019> cabx


put /var/opt/ericsson/amos/moshell_logfiles/saigon/logs_moshell/tempfiles/20100205-133928_13724/lhCmd13770 /d/usr/lhCmd13770 ... OK....

===================================================================================

SMN APN BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR TEMP COREMGR

===================================================================================

0 1 CBU1 ON 16HZ OFF ROJ 119 2209/1 R5J 20090831 CB4A584198 +49C *

0 2 ET-MFX ON OFF OFF ROJ 119 2315/2 R1A 20090604 TU8GB77073

0 5 RAX ON 16HZ OFF ROJ 119 2187/14 R1D 20090828 CB4A573801

0 6 RAX ON 16HZ OFF ROJ 119 2187/14 R1D 20090828 CB4A573700

0 8 TX6HS-04 ON 16HZ OFF ROJ 119 2254/8 R1D 20090829 CB4A578240

0 9 OBIF ON 16HZ OFF ROJ 119 2238/22 R1F 20090804 TB3C794153

-----------------------------------------------------------------------------------------------------

================================================================

SMN ProductNr Rev Name Date SerialNr

================================================================

0 ROJ 609 50/1 * Subrack DigSubrack

0 ROJ 609 50/1 R1A BACKPLANE 20090515 X911813387

----------------------------------------------------------------

===================================================================================SMN APN PORT BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR

===================================================================================

0 9 port_0_dev_6 RRU steady 16hz off KRC 161 134/1 R1F 20090909 CB4A647874



HCRNC01> get Iub_hc1019


===================================================================================

8865 RncFunction=1,IubLink=Iub_HC1019

===================================================================================

IubLinkId Iub_HC1019

administrativeState 1 (UNLOCKED)

atmUserPlaneTermSubrackRef Subrack=ES-1


cachedRemoteCpIpAddress1

cachedRemoteCpIpAddress2

controlPlaneTransportOption Struct{2}

>>> 1.atm = 1 (TRUE)

>>> 2.ipv4 = 0 (FALSE)

dlHwAdm 100

l2EstReqRetryTimeNbapC 5

l2EstReqRetryTimeNbapD 5


rbsId

1019

remoteCpIpAddress1

remoteCpIpAddress2

reservedBy [3] =

>>> reservedBy = RncFunction=1,UtranCell=HC10191



rncModuleRef RncModule=ES-1-2-0

sctpRef

spare

0

ulHwAdm 100

userLabel

Iub_HC1019

userPlaneGbrAdmBandwidthDl 10000

userPlaneGbrAdmBandwidthUl 10000

userPlaneGbrAdmEnabled 0 (FALSE)

userPlaneGbrAdmMarginDl 0

userPlaneGbrAdmMarginUl 0

userPlaneIpResourceRef IpAccessHostPool=Iub

userPlaneTransportOption Struct{2}

>>> 1.atm = 1 (TRUE)

>>> 2.ipv4 = 1 (TRUE)

=================================================================================================================

Total: 1 MOs

HCRNC06> uer


Printing all active UeContexts.

=========================================================================================================================

MOD IMSI/TMSI CTXT CommCh RL1 RL2 RL3 DCdev CoreNetId AGE UERC + ESTAB_CAUSE

=========================================================================================================================

81 452028060028714 8774 2901:29013 0127sp4 P 4522 00:02:59 4 (RACH/FACH) (2:origInteractive)


81 452021100954287 10171 2909:29093 2909:29093 0110sp2 C 4522 00:00:15 2 12.2 (0:origConversational)

81 452028301036443 10010 2407:24072 0111sp1 P 4522 00:05:34 4 (RACH/FACH) (12:registration)

81 452026000420236 9749 2901:29013 0110sp2 P 4522 00:00:35 4 (RACH/FACH) (7:termInteractive)

81 452021101113144 9650 3:31 0110sp2 P 4522 00:01:14 4 (RACH/FACH) (7:termInteractive)

81 452022001449448 8914 4:41 0110sp0 P 4522 00:22:56 53 (16/HS) (12:registration)

81 452026300160431 9913 2401:24012 2401:24012 2408:24083 0127sp4 C 4522 00:00:02 1 (13.6/13.6) (0:origConversational)

81 452021101868483 7691 2401:24011 0110sp4 P 4522 00:36:48 52 (128/HS) (14:origHighPrioSignaling)


81 452020000617406 8521 2901:29011 2901:29011 0105sp4 P 4522 00:00:06 53 (16/HS) (2:origInteractive)


81 452026040012695 8771 2407:24072 2401:24013 0111sp1 P 4522 00:09:24 7 (64/384) (12:registration)

81 452021101869415 2169 2409:24092 0106sp3 P 4522 02:21:23 16 (384/HS) (2:origInteractive)

81 452024000144417 10247 2:22 2:22 0110sp0 C 4522 00:00:58 2 12.2 (5:termConversational)

81 452028201830407 8515 2402:24021 0111sp4 P 4522 00:12:01 53 (16/HS) (14:origHighPrioSignaling)

=========================================================================================================================

=================================================================

UeRc M21 M60 M80 M81 M120 userLabel

=================================================================

1 0 0 0 1 0 (13.6/13.6)

2 0 0 0 3 0 12.2

4 0 0 0 6 0 (RACH/FACH)

7 0 0 0 1 0 (64/384)

16 0 0 0 1 0 (384/HS)

52 0 0 0 1 0 (128/HS)

53 0 0 0 3 0 (16/HS)

=================================================================

Tot: 0 0 0 16 0

=================================================================

Cause M21 M60 M80 M81 M120 EstablishmentCause

=================================================================

0 0 0 0 3 0 origConversational

2 0 0 0 5 0 origInteractive

5 0 0 0 1 0 termConversational

7 0 0 0 2 0 termInteractive

12 0 0 0 3 0 registration

14 0 0 0 2 0 origHighPrioSignaling

=================================================================

Tot: 0 0 0 16 0

===============================================

UeRc Total % userLabel

===============================================

1 1 6.2 (13.6/13.6)

2 3 18.8 12.2

4 6 37.5 (RACH/FACH)

7 1 6.2 (64/384)

16 1 6.2 (384/HS)

52 1 6.2 (128/HS)

53 3 18.8 (16/HS)

===============================================

Tot: 16 100

===============================================

Cause Total % EstablishmentCause

===============================================

0 3 18.8 origConversational

2 5 31.2 origInteractive

5 1 6.2 termConversational

7 2 12.5 termInteractive

12 3 18.8 registration

14 2 12.5 origHighPrioSignaling

===============================================

Tot: 16 100HCRNC06> uer -c bt2401


Printing active UeContexts who have a radio link or common channel in UtranCell matching bt2401

==============================================================================================

MOD IMSI/TMSI CTXT CommCh RL1 RL2 RL3 DCdev CoreNetId AGE UERC + ESTAB_CAUSE

==============================================================================================


81 452025020276750 9247 2401:24011 2401:24011 0110sp0 P 4522 00:01:29 15 (64/HS) (12:registration)

==============================================================================================

=================================================================

UeRc M21 M60 M80 M81 M120 userLabel

=================================================================

1 0 0 0 2 0 (13.6/13.6)

2 0 0 0 3 0 12.2

4 0 0 0 5 0 (RACH/FACH)

7 0 0 0 1 0 (64/384)

15 0 0 0 4 0 (64/HS)

16 0 0 0 1 0 (384/HS)

52 0 0 0 1 0 (128/HS)

53 0 0 0 3 0 (16/HS)

=================================================================

Tot: 0 0 0 20 0

=================================================================

Cause M21 M60 M80 M81 M120 EstablishmentCause

=================================================================

0 0 0 0 2 0 origConversational

2 0 0 0 5 0 origInteractive

7 0 0 0 4 0 termInteractive

10 0 0 0 1 0 IRAT_cellReselection

12 0 0 0 5 0 registration

14 0 0 0 2 0 origHighPrioSignaling

19 0 0 0 1 0 termCauseUnknown

=================================================================

Tot: 0 0 0 20 0

===============================================

UeRc Total % userLabel

===============================================

1 2 10 (13.6/13.6)

2 3 15 12.2

4 5 25 (RACH/FACH)

7 1 5 (64/384)

15 4 20 (64/HS)

16 1 5 (384/HS)

52 1 5 (128/HS)

53 3 15 (16/HS)

===============================================

Tot: 20 100

===============================================

Cause Total % EstablishmentCause

===============================================

0 2 10 origConversational

2 5 25 origInteractive

7 4 20 termInteractive

10 1 5 IRAT_cellReselection

12 5 25 registration

14 2 10 origHighPrioSignaling

19 1 5 termCauseUnknown

===============================================

Tot: 20 100

HELP MENU

: h

BASIC MO COMMANDS : m

OTHER MO COMMANDS : n

OTHER COMMANDS

: o

PM COMMANDS

: p

QUIT

: q

mom[tcdbrl] Print description of MO classes, CM/FM attributes, actions

, enums and structs.

lt/clt/ltc[1-9] Load MO tree (full or partial) and build proxy table.

lc[1-9]/lcc Load MO tree (full or partial) and build proxy table.

pr/lpr Print MO LDNs and proxy ids for all or part of the MO tree

currently loaded in moshell.

ma/lma Add MO(s) to an MO group.

get/lget Read CM/FM attribute(s) from MO(s).

hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one

line per MO (instead of one line per attribute).

kget/lkget Display CM/FM attributes in exportable printout format.

st/lst Print state of MOs (operationalState and administrativeSta

te when applicable).

lk/llk View all MO's linked to an MO, and their states (admState

and opState).

lko/llko Obsolete command, use lk/llk instead.

set[m][c]/lset[m][c] Set an attribute value on one or several MO's.

bl[s]/lbl[s] Lock or soft-lock MO(s).

del/ldel Delete MO(s).

rdel/lrdel Delete MO(s) together with children and reserving MOs.

u+[s]/u-/u?/u! Handling of undo mode (for cr/del/rdel/set/bl/deb/acc comm

ands). Can be used for generation of MO scripts as well.

trun[i] Run a command file in EMAS/MoTester format.

re[i] Disconnect and reconnect to the CM service (mobrowser) and

/or the PM service (pmtester).

ld Load one MO from the tree and add to the proxy table.

sget/lsget Read CM/FM attributes from MO(s), one by one ("Slow" get).

cvls/cvmk/cvms/cvset/cvrm/cvcu/cvget/cvput/cvls1 CV backup handling: list, make

local, make remote, remove, setstartable.

inv[hr] Complete HW/SW inventory. Includes information about RPUs,

licensing, JVM, devices, XPs, ISL, etc.

cab[slxradgtmeh] Display of miscellaneous COLI printouts relating to hw, sw

, restarts, leds, cpu load, errors, disk/ram usage

stc[p][r] Display state and configuration of Atm/Tdm CrossConnection

s.

std[ar] Display state and configuration of devices (RNC and MGW on

ly).

stv[b][r] Display state, user, and bandwidth usage for ATM ports and

channels.

stt[r] Display state and user of Physical Ports and Ds0Bundles.

sti[bcpr] Display state and configuration of IP interfaces.

diff/ldiff Parameter auditing or MO dump comparisons.

str[12ft] Print status of the IubLinks/AbisLinks and their associate

d Cells and Channels (RNC/BSC only).

lki Obsolete command, use lkra instead.

lkr[a] Print RNC Iub resources allocation.

remod[u][2] Remodule an IubLink (RNC < P5). For RNC >= P5, use command

"resub".

resub Moving Iub resources within or across Subracks (RNC >= P5)

.

tg[r][c][d] Print Resource Object information for all MOs in LmCell (R

NC only).

uer[d][t] Print UE context data (serving or drifting) for all active

calls (RNC only).

ced[h][r] Print dynamic cell data or capacity usage (RNC only).

uv Print or change moshell configuration settings (also calle

d "user variables").

pv Print scripting variables.

l+[m][m][s][o]/l-/l? Open/close moshell logfiles.

ose/coli command Send a COLI command to the node's OSE shell. Type "h ose"

for syntax help and "?" to view available commands.

bo[r]/ba[swdp]/br[wd]/be[0-50]/bp Manage board groups that can be used for runn

ing COLI commands on multiple boards.

mon/mon+/mon-/mon? Start/stop/check the target monitor server on the node and

/or start the monitor client for one or more board Group(s).

fclean[f|ff|a|d|e] Removal of obsolete loadmodules OR recursive removal of a

directory on the node.

time[t] Measure time taken by an moshell command or by each comman

d in a moshell command file.

lmid[c]/upid[m] Print translation of loadmodule/upgradepackage product num

ber or T&E error codes.

ul Toggle display of userlabel in st/lst and pget/lpget print

out.

ip2d/d2ip Convert an IP address into the format used in the fRO (sql

database) or vice-versa.

h2d/d2h Convert an integer to hexadecimal or viceversa.

h2b/b2h Convert a binary to hexadecimal or viceversa.

return Exit from a command file without exiting from moshell (scr

ipting).

hpget[c]/lhpget[c] Read PM attribute(s) from MO(s), print horizontally one li

ne per MO (instead of one line per attribute).

pdiff/lpdiff Print incrementation of PM attributes.

pmx[hfdns] Display counter values, extracted from the statistics ROP

files.

pmr[agf] Produce PM KPI reports, based on counter values in statist

ics ROP files and formulas in CPI documentation.

pme[fd][cgur] Fetch/decode event ROP files (RNC/RBS only).

HC1019> help


$ help

Command Description

default shell command

. execute commands from file

? print description of commands

a50 a50 - A50 Server status

a50d Possible options: irqstat and help.

aal05ccfro Print CC_AalCrossConn

aal05connid Prints out NodeConnection specified by serverConnId

aal05portid Prints out RiServer instance specified by portid

aal05riconnref Prints out riServerConnList[] array elements

aal05serverid Prints out CiServer instance specified by serverid

aal0cepfro Print ActAal0CepFro_CepFro

aal0eficlient Print ActAal0CepFro_EfiClient

aal0statres Print Aal0ResourceDataInstance

aal1stat Possible options: reset and help. No argument=display stats.

aal2ap Prints AAL2 AP program data.

aal2cpsrc Prints AAL2 CPS RC program data

aal2ncc Prints AAL2 NCC program data

aal2nccadm Prints AAL2 NCC ADM program data

aal5cepfro Print ActAal5CepFro_CepFro

aal5dyncep Print dynamic ActAal5CepRo

aal5dynres prints out Aal5ResourceDataInstance...

aal5eficlient Print ActAal5CepFro_EfiClient

aal5ericlient prints out Aal5EriClientInstance

aal5statcep Print static ActAal5CepRo

aal5statres Print Aal5ResourceDataInstance

aatest Diagnostics for AA server(s), -h for more help

aet_aal2bp Status info for the AET AAL2 BP program

aet_aal2mp Status info for the AET AAL2 MP program

aet_atmbp status info for AET ATM BP program

aet_atmmp status info for AET ATM MP program

aet_ds0bp status info for AET DS0 BP program

aet_ds0mp status info for AET DS0 MP program

aet_imabp Provides object status information for the AET IMA BP program

aet_imamp Provides object status information for the AET IMA MP program

aet_iworxDrv Debug the IWORX driver

aet_tdmccmp status info for AET DS0 MP program

aetlss Lists service registrations in the LSS

arm print LLP armament info

arp Display ARP cache entries

arplist Display ARP table entries

atfConnect Connect an AU via ATFI

autodds Set error check level and/or default trace

banner

biosls List installed bios modules

bl list processes

bmlmdata List loaded modules data

bmpgmconfig Management of Board Manager configuration

boardtemp Read board temperature (hotspot or selected temp sensor)

bs Execute a number of commands and print result

capi

cat copy files to stdout

chmod change access mode of files

cls clear screen (using ANSI codes)

connfss connect to remote fss

cp copy files

createObj Creates an object.

csti csti - csti Server status

cv Configuration version command

dcp DCS PDR link information

dcs DCS device and link information

dda Send DDA command

deleteObj Delete an object.

domlist list all regions in one/all domain(s), optionally showing used physical memory fragments.

dump Print a post mortem dump.See dump -h for more options.

dumpcap dumps OAM IP-communication in pcap format on file

dumpecncr Dumping EcNcrNodeConfigurationRepository(NCR) component residing at MPSW-EQC level

dumpelg dumpelg will print the error and repair logs to screen

dumph dump heap info or list all heaps

echo echo arguments (-n no newline)

efcdump filter = anp|gdl|gul|oil|rfc|sub|txm|all

errno print description of errno number

errorlist Print all registrered error codes.

espray

ethernet Ethernet driver cmd's

ethmode Ethernet speed/duplex control cmd's

exs_spstp status info for EXS STPF MP program SPSTP part

exs_sstp status info for EXS STPF MP program SSTP part

file Display and manage objects in 2nd filesystem.

format format a volume

formathd Format the Hard Disk

fssls list fss objects

getAttrObj Get attributes for an object.

getDiskDataObj Get attributes for disk for an object.

getProcessorLoad Get processor load for a PIU.

getpri This command has been disabled

hdinfo Hard disk parameter information

hdreadtest Hard disk read test of HD

hdstat Hard disk statistics printout

heapinfo Heap information (for proc/seg)

help print description of commands

hili Hardware Inventory Log Handling commands

hostname show or set hostname

hwpid Read hardware pid from specified target

ifconfig Print IP address

ipac_blockHostRegi Command for blocking of IPHOSTREGI

ipac_blockSyncRegi Command for blocking of IPSYNCREGI

ipac_ipadm Status info for the IPAC IP Adm administrator program

ipac_ipsyncref Status info for the IPAC IP Sync Ref administrator program

ipac_ping Send echo request from IPAC host.

ipac_traceroute Send traceroute request from IPAC host. please note that the time display in the output is based on router configuration

ipcp_bh Status info for the IPCP board handler administrator program

ipcp_dh Status info for the distribution handler administrator program

ipcp_lh Status info the IPCP link handler administrator program

iptransmode information about ip transport settings

jdumpthreads Dump the stack trace of Java threads

jheapinfo Java heap information

keys configure/display terminal key settings

lhconfig Config of link handlers

lhsh Execute command on remote processor

license License server command (license )

linkstat MP-AU HDLC statistics

listObj List an object.

list_filterobj Print filter data

list_traceobj Print trace data

listenv list environment variables for and their corresponding block.

listloaded List Loaded Modules

llog Read error log

ln make a link from one file to another

log Log server command

logattributes List the attributes for a log

logdelete Delete a log

login login command is not supported

loglevel Set loglevel for OSENET.

loglist Lists all available logs

ls list files

man man command

mch MCH info

md5 prints MD5 checksum for a file

mkdir create directories

mm Display MM run-time state information

mount mount a volume

msi_list Print region data for MSI

mv rename/move files

ncli MO cmd: ncli, start NCLI session to access CS.

netstat Display net statistics

node_id node identity commands

nsinfo Nameserver information commands

nssinfo Get NSS status information

nssmpinfo Get NSS MP status information

nssyciinfo Get NSS status information

ntp NTP handling commands.

ntpconfig Set ntp server ip address | get ntp info

ospi_CXC1320782 Prints ospi status



partition Create, delete and list disk partitions.

passwd Changing password for all users

pboot Display and manage object in the primary filesystem

pcapexplorer Lists dumpcap traces. Traces can be deleted with the -d option

pdr PDR info

pgmUpgradeObj Soft program upgrade

pgrun load and run program

phySetRo_status Gets current status of SET RO object for one piuId

phy_eqmtbp Lists equipment and driver data

phy_eqmtmp Lists all objects on MP

phyhp_status Gets current status of specified HP object

phyhpdh_status Gets current status of specified HPDH FRO object

phylp_status Gets current status of specified lp object

phylpdh_status Gets current status of specified lpdh object

phymspg_status Gets current status of specified mspg object

phyos155_status Gets current status of specified os155 object

ping The command verifies the IP connectivity to a host.

pm_create Create a program.

pm_ff Print all file formats supported.

pm_install Install a load module

pm_kill Kill program

pm_lmconf Print configuration for a load module image.

pm_lminfo Print information for a/all load module image(s).

pm_pgconf Print configuration for a program.

pm_pginfo Print information for a/all program(s).

pm_pt Print all program types supported.

pm_start Start a program.

pm_uninstall Uninstall a load module image

poolinfo List information about pools

ppcpm start performance monitoring

preload Loads the flash with the specified programs

printf ,redirect printf or end redirections

ps list processes

pwd print the working directory

qs List signals in a process signal queue

rcmd remote command execution

rcp Copy files or directory to remote local volumes

readAsccReg Reads the Ascc register

readSpicReg Reads the Spic register

readclock Read system clock [unix date format]

reload Restart the board (default warm)

restartNtp Restarts NTP Kernel

restartObj restarts an object.

rlc Clear the ramlog

rld Display ramlog

rlw Write a string to the ramlog

rm remove files

rmdir remove (empty) directories

rollback Rollback a transaction

rpmm ram pmm commands

rrh rrh help

rrt Type 'rrt help' to display RoseRT debugger commands

rrt-CXC1726497%1_R33BB01 Type 'rrt-CXC1726497%1_R33BB01 help' to display RoseRT debugger commands

rsock Configure/query rsock deamon.

run Runs all intercepted processes

scc1stat SCC1 UART statistics printout

scc3stat SCC3 UART statistics printout

sccrcinfo sector = 1..6 carrier = 1..4 object = a string

sctp_config prints some SCTP-ROF configuration data

sctpadm_config cmd sctpadm_config lists some configuration data in SCTP ADM.

sctpadm_info cmd sctpadm_info lists all process info in SCTP ADM

sctphost_info cmd sctphost_info lists association or endpoint info in SCTP HOST

sctphost_stat cmd sctphost_stat prints some statistical information

secmode

setAttrObj sets an attribute value for an object.

setGracePeriod kindOfResource = 0..2 decreaseTimer = 1..1000

setclock Set Clock

setenv set/list environment variable [for block] [for process]

setpri This command has been disabled

shell invoke shell

sigs List information about signals

sleep This command has been disabled

sma Prints SMA status and container data

smcstat SMC statistics printout

spashwinfo Get Spas HW status information

spashwpoll Start/stop polling and meta signalling

spaslinkmonitor Test client for CRM Interface

spaspccinfo Retrieve plane change control info.

spastopologyinfo SPAS topology Info

spdel Delete a system parameter.

spedit Edit system parameters interactively

splitethcdbg Returns debug information fetched from split eth client.

splitethsdbg Returns debug information fetched from ose_split_server.

splitethstat Shows/clears statistics of split ethernet server/client.

spmod Stepwise view and modify system parameters.

spr Read a system parameter.

spray

spw Write a system parameter.

ss Show maximum process stack usage

stat report information about file/directory

statheapchc static heap manager

switchObj Switch an object.

sync synchronize volume with disk

sysloadnext load next boot LM

syspar Get or set system parameters

te Trace & Error Handling commands

term display info about terminal

tm target monitor command

touch Create an empty file.

traceroute The command finds the routing path to a certain host.

uetrace The command for enabling, disabling and printing the status of the selective

unmount unmount a volume

unsetenv remove environment variables [from block] [from process]

uptime display system uptime

usaaladm information about usaaladm

usaalserver information about usaalserver

vii VII info

vols report volume statistics

who list who is logged on

zzosvarp Show the address of the OSE kernel data handle.

$ HC1019> h

----------------------------------- BASIC MO COMMANDS ----------------------------------

mom[tcdbrl] Print description of MO classes, CM/FM attributes, actions, enums and structs.

lt/clt/ltc[1-9] Load MO tree (full or partial) and build proxy table.

lc[1-9]/lcc Load MO tree (full or partial) and build proxy table.

lu/llu Unload MOs from MO tree.

pr/lpr Print MO LDNs and proxy ids for all or part of the MO tree currently loaded in moshell.

ma/lma Add MO(s) to an MO group.

mr/lmr Remove an MO group or remove MOs from an MO group (MOs will NOT be deleted, only the group).

mp Print all defined MO groups.

get/lget Read CM/FM attribute(s) from MO(s).

hget[c]/lhget[c] Read CM/FM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).

kget/lkget Display CM/FM attributes in exportable printout format.

fro/lfro[m] Read MAO data of an MO and/or froid of the MO. Data read from SQL tables motype_r1 and modata_r2.

st/lst Print state of MOs (operationalState and administrativeState when applicable).

prod Print productData of MO(s).

lk/llk View all MO's linked to an MO, and their states (admState and opState).

lko/llko Obsolete command, use lk/llk instead.

set[m][c]/lset[m][c] Set an attribute value on one or several MO's.

rset/lrset Set attribute value on a restricted attribute or change the MOid of an MO.

bl[s]/lbl[s] Lock or soft-lock MO(s).

deb/ldeb Unlock MO(s).

acl/lacl Lists available MO actions.

acc[e]/lacc[e] Execute an MO action.

cr[e] Create an MO.

del/ldel Delete MO(s).

rdel/lrdel Delete MO(s) together with children and reserving MOs.

s+/s-/s? Sort MO list in alphabetical order instead of proxy order.

u+[s]/u-/u?/u! Handling of undo mode (for cr/del/rdel/set/bl/deb/acc commands). Can be used for generation of MO scripts as well.

run Run a command file in moshell format.

trun[i] Run a command file in EMAS/MoTester format.

ctrl-z Abort an MO command or a "for" loop. Type "touch /tmp/;fg" to resume the moshell session.

pol[s][h][c][u][m] Poll the node until the MO service is up or until an operation has completed.

re[i] Disconnect and reconnect to the CM service (mobrowser) and/or the PM service (pmtester).

getmom Check the MOM version currently stored on the node.

parsemom Parse an xml MOM file.

ld Load one MO from the tree and add to the proxy table.

sget/lsget Read CM/FM attributes from MO(s), one by one ("Slow" get).

----------------------------------- OTHER MO COMMANDS ----------------------------------

cvls/cvmk/cvms/cvset/cvrm/cvcu/cvget/cvput/cvls1 CV backup handling: list, make local, make remote, remove, setstartable.

inv[hr] Complete HW/SW inventory. Includes information about RPUs, licensing, JVM, devices, XPs, ISL, etc.

cab[slxradgtmeh] Display of miscellaneous COLI printouts relating to hw, sw, restarts, leds, cpu load, errors, disk/ram usage

stc[p][r] Display state and configuration of Atm/Tdm CrossConnections.

std[ar] Display state and configuration of devices (RNC and MGW only).

stv[b][r] Display state, user, and bandwidth usage for ATM ports and channels.

stt[r] Display state and user of Physical Ports and Ds0Bundles.

sti[bcpr] Display state and configuration of IP interfaces.

hc Run a general healthcheck on the node. Obsolete ! Use dcg command instead.

dcg[measrfk] Fetch data for TRs/CSRs, according to the Data Collection Guidelines.

diff/ldiff Parameter auditing or MO dump comparisons.

str[12ft] Print status of the IubLinks/AbisLinks and their associated Cells and Channels (RNC/BSC only).

lki Obsolete command, use lkra instead.

lkr[a] Print RNC Iub resources allocation.

remod[u][2] Remodule an IubLink (RNC < P5). For RNC >= P5, use command "resub".

resub Moving Iub resources within or across Subracks (RNC >= P5).

tg[r][c][d] Print Resource Object information for all MOs in LmCell (RNC only).

uer[d][t] Print UE context data (serving or drifting) for all active calls (RNC only).

ced[h][r] Print dynamic cell data or capacity usage (RNC only).

al[atkc] Print the list of active alarms. Acknowledge/Unacknowledge an alarm.

lg[aevsyuoltdhmircfxgpq] Fetching and/or processing of node logs (alarm, event, availability, system, etc)

----------------------------------- OTHER COMMANDS ----------------------------------

uv Print or change moshell configuration settings (also called "user variables").

pv Print scripting variables.

!/l Execute a unix command on the PC/workstation.

l+[m][m][s][o]/l-/l? Open/close moshell logfiles.

ose/coli command Send a COLI command to the node's OSE shell. Type "h ose" for syntax help and "?" to view available commands.

bo[r]/ba[swdp]/br[wd]/be[0-50]/bp Manage board groups that can be used for running COLI commands on multiple boards.

lh Run COLI commands on all boards of a board group.

mon/mon+/mon-/mon? Start/stop/check the target monitor server on the node and/or start the monitor client for one or more board Group(s).

sql+/sql-/sql? Start/stop/check the SQL client on the node (CXC1325608).

pgu[c][f][r] Program Upgrade. For STP use only, eg, to load black LMs.

proglist/progkill List or restart programs on boards or board groups.

ftree[f] Recursive listing of a directory on the file system of the node or the workstation.

ftget[c]/ftput[c] Transfer files or directories to/from the node, using ftp or sftp.

htget Transfer files from the node using http.

edit Edit a file on the node.

fclean[f|ff|a|d|e] Removal of obsolete loadmodules OR recursive removal of a directory on the node.

hi Print history of moshell commands entered during the current session.

time[t] Measure time taken by an moshell command or by each command in a moshell command file.

lmid[c]/upid[m] Print translation of loadmodule/upgradepackage product number or T&E error codes.

p/w/pw/b Change moshell prompt and/or window title.

prox Toggle display of proxy identities in printout of get command.

col Toggle display of colors.

ul Toggle display of userlabel in st/lst and pget/lpget printout.

conf[bld] Toggle confirmation on various MO commands.

gs[+-]/gsg[+-] Toggle display of old/new attribute value in set/bl/deb commands.

ip2d/d2ip Convert an IP address into the format used in the fRO (sql database) or vice-versa.

h2d/d2h Convert an integer to hexadecimal or viceversa.

h2b/b2h Convert a binary to hexadecimal or viceversa.

wait Specify a delay in hrs, mins, secs, or rops. Similar to the unix "sleep" command (scripting).

return Exit from a command file without exiting from moshell (scripting).

print Print a line or variable (scripting).

alias/unalias Print or define command aliases.

q/by/exit/quit Exit moshell.

----------------------------------- PM COMMANDS ----------------------------------

pmom[acd]/lmom[c] Print description of PM counters (pmom) or log attributes (lmom, CDMA only).

pget/lpget Read PM attribute(s) from MO(s).

spget/lspget Read PM attribute(s) one by one ("slow pget").

hpget[c]/lhpget[c] Read PM attribute(s) from MO(s), print horizontally one line per MO (instead of one line per attribute).

pdiff/lpdiff Print incrementation of PM attributes.

pmx[hfdns] Display counter values, extracted from the statistics ROP files.

pmr[agf] Produce PM KPI reports, based on counter values in statistics ROP files and formulas in CPI documentation.

pme[fd][cgur] Fetch/decode event ROP files (RNC/RBS only).

pst List all PM scanners and their state.

pgets[n][m] Print scanner contents.

emom Display list of events available for each kind of event-based scanner.

----------------------------------- HELP CHAPTERS ----------------------------------

0 Revision History

1 Introduction

2 Installation, and user settings

3 Command syntax, regular expressions

4 Command descriptions

5 Lazy

6 Scripting

7 Utilities

8 Server Maintenance

9 Offline Mode and Multi Mode

Type: - h to view command description, e.g: h pget

- h to view commands whose description match a string, e.g: h change.*prompt

- h to view a chapter, e.g: h 3lt all

al

ala

lst cell=hc1238

Cnh bo nh hng cuc gi

Lost of Tracking Synchronization

HCRNC01> lpget Subrack=ES-1,Slot=18,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTt


==============================================================================

MO Attribute Valu

==============================================================================

Subrack=ES-1,Slot=18,PlugInUnit=1,ExchangeTerminal=1,Os155SpiTtp=ES1-18-3,Vc4T




==============================================================================

Total: 1 Mos

Documents

Cac Lenh Trong Moshell