7
SUMMARY My career to date has been predominantly within the field of project construction management including design, engineering, testing and commissioning of large investment projects in Pakistan, United Arab Emirates and North Africa [Libya]. Currently I am working with DESCON Integrated Projects (Private) Limited, Pakistan for their 132KV Gas Insulated Switchgear Projects at Korangi and Site, Karachi, Pakistan. My mother tongue is Punjabi, I also speak English Fluently. NATURE OF DUTIES - Execute electrical design (Concept, Technical Study & Detailed Design) and design deliverable to the required technical quality in the light of Scope of Work, Specifications, Utilities Standards and Codes. - Review and approval of third party drawings and documentation for all types of electrical equipment. - Supervision of project planning and scheduling. - On site project safety supervision. - Co-ordination meetings and liaison with third parties including clients and vendors. - Preparation, checking and approval of equipment data sheets, electrical load list and load flow, motor starting, equipment sizing, short circuit and dynamic stability studies, inspection. - Witnessing testing of electrical equipment at manufacturers works. - Lead testing and commissioning activities of electrical system. - Design, testing and commissioning of plant level interlocking and inter trip. - Design review testing and commissioning of SCADA/RTU and PLC System.

CV_Abdul Razzaq.doc

Embed Size (px)

Citation preview

Page 1: CV_Abdul Razzaq.doc

SUMMARY

My career to date has been predominantly within the field of project construction management including design, engineering, testing and commissioning of large investment projects in Pakistan, United Arab Emirates and North Africa [Libya]. Currently I am working with DESCON Integrated Projects (Private) Limited, Pakistan for their 132KV Gas Insulated Switchgear Projects at Korangi and Site, Karachi, Pakistan.My mother tongue is Punjabi, I also speak English Fluently.

NATURE OF DUTIES

- Execute electrical design (Concept, Technical Study & Detailed Design) and design deliverable to the required technical quality in the light of Scope of Work, Specifications, Utilities Standards and Codes.

- Review and approval of third party drawings and documentation for all types of electrical equipment.

- Supervision of project planning and scheduling.

- On site project safety supervision.

- Co-ordination meetings and liaison with third parties including clients and vendors.

- Preparation, checking and approval of equipment data sheets, electrical load list and load flow, motor starting, equipment sizing, short circuit and dynamic stability studies, inspection.

- Witnessing testing of electrical equipment at manufacturers works.

- Lead testing and commissioning activities of electrical system.

- Design, testing and commissioning of plant level interlocking and inter trip.

- Design review testing and commissioning of SCADA/RTU and PLC System.

PERSONAL

Name : Abdul Razzaq

Home Address : Street No. 1, House No. 3, Sultan Mehmood Road, Near Allied Bank, Shalimar Town, Lahore, Pakistan.

Telephone : 00 92 300 429281000 92 336 4100935

Page 2: CV_Abdul Razzaq.doc

E. mail : [email protected]

Date of Birth : March 12, 1969.

Place of Birth : Lahore, Pakistan.

Profession : Electrical Engineering

Nationality : Pakistani

Marital Status : Married with Children

Driving License : Pakistani Driving License

Languages Known : English, Urdu & Punjabi.

QUALIFICATION/PROFESSIONAL AFFILIATION

Diploma of Associate Engineer in Electrical/Government College of Technology, Lahore, Pakistan.

EXPERIENCE

April, 2008 to date. DESCON Integrated Projects (Private) Dy. Manager Electrical Limited

EPC Power Projects Assigned at the following jobs:

132KV GAS Insulated Switchgears, Korangi, Karachi, Pakistan. Lead Grid March, 2014 to date.

Job responsibilities included:Project construction management including installation, testing and commissioning activities of 132KV GIS- total 17 bays , 31.5/40MVA power transformers, 31.5/40MVA block transformers, MV and LV switchgears, AC & DC system, 132KV GIS building, dismantling of existing 132KV AIS substation and replacing it with new GIS with minimum interruption. Design review, testing and commissioning of SCADA/RTU and PLC system.

132KV GAS Insulated Switchgears, Site, Karachi, Pakistan. Lead Grid March, 2014 to date.

Page 3: CV_Abdul Razzaq.doc

Job responsibilities included:Project construction management including supervision of planning and scheduling, installation, testing and commissioning activities of 132KV GIS- total 5 bays, 31.5/40MVA block transformer, LV switchgears, AC & DC system, dismantling of existing 132KV GIS substation. Design review, testing and commissioning of SCADA/RTU and PLC system.

400MW UCH II Combined Cycle Power Plant, Dera Murad Jamali, Pakistan Lead Commissioning ElectricalFebruary, 2013 to February, 2014.

Job responsibilities included:Construction, Testing and Commissioning activities of the project including 220KV substation, transformers, MV & LV switchgears, Beckwith automatic motor bus transfer systems for MV & LV switchgears, AC & DC UPS systems, emergency DG set, DCS interface, plant level interlocking and inter trips.

225MW Combined Cycle Power Plant, Bhikki, Pakistan Lead Electrical EngineerDecember, 2008 to January, 2013..

Job responsibilities included:Design, testing and commissioning activities of the project including 132KV substation, transformers, MV LV switchgears, inverters, UPS system, 3x1.8MW DG sets, DCS and SCADA Systems interfaces, plant level interlocking and inter trips.

32MW Altern Energy Power Plant Testing and Commissioning EngineerApril, 2008 to November, 2008.

Job responsibilities included:Installation and Commissioning activities of 8 X 4MW Gas Fired Generators, 132KV substation, MV LV Switchgears, Control and Protection Panels. 110V DC system. 500KVA DG Set. August 2004 to October 2008 AL NAHR CONSTRUCTION CO. LTD.Electrical Design Engineer Pipe Manufacturing & Construction

Tripoli, Libya.Assigned at the following jobs:Garabulli Agricultural ProjectEngineering, design and commissioning activities of project including three turnouts, two pump stations, three balancing tanks and down stream flow control valves network at

Page 4: CV_Abdul Razzaq.doc

Garabulli, Libya.

Operation Support & Maintenance Buildings Phase III Project at AssdadaMV & LV substation, lighting and earthing system.

Ghadames Zuwara Az zawiyah Water Supply Project Engineering and design of electrical substation.

Tarhunah to Abu Ziyyan Conveyance Pipeline Project Design, testing and commissioning of fiber optic cable route drawings. Preparation of direct buried fiber optic cable installation procedures by mole plough method.

February 1999 to January 2003 Control Contracting & TradingElectrical Design Engineer Company (Pvt) Limited

Abu Dhabi, United Arab Emirates (A Major Electro-Mechanical Contractor in the Middle East for Humidification Ventilation & Air Conditioning System)

Assigned at the following jobs:ELF Petroleum, Qatar. Instrumentations and Control (Alan Bradley - Controllogix) of Humidification Ventilation & Air Conditioning System and Electrification for Off Shore Platforms. CCTC Reference No. P207.

Mirfa Desalination Station, Abu Dhabi. U.A.E.Instrumentations and Control (SIEMENS-SIMATIC S7-300) of Humidification Ventilation & Air Conditioning System and Electrification for Off Shore Platforms. CCTC Reference No. P207.

Umm Al Nar Oil Refinery, Abu Dhabi, U.A.E.Instrumentations and Control (Alan Bradley - Controllogix) of the motor operated Valves for the Unleaded Gasoline Pipelines.

October 1990 to February 1999 ALSTOM Pakistan (Private) LimitedSr. Electrical Engineer - Project (A Subsidiary of ALSTOM S.A. France)

Formerly AEG Pakistan (Private) Limited(A Subsidiary of AEG Germany) A Leading Multinational Organization Dealing in 132/11KV Substations on EPCBasis.

Assigned at the following jobs:132KV 10/13MVA Single Bay Substation for CPC Rafhan Limited, at Faisalabad,

Page 5: CV_Abdul Razzaq.doc

Pakistan in 1991. ALSTOM/AEG Reference No. L-21262.

132KV 10/13MVA Single Bay Substation for Zahoor Textile Mills Limited at Bhai Pheru, Pakistan in 1993. ALSTOM/AEG Reference No. L-21589.

132KV 10/13MVA Double Bay Substation for Muhammad Buksh Textile Mills Limited at Bhai Pheru, Pakistan in 1994. ALSTOM/AEG Reference No. : L-21664

132KV 10/13MVA Single Bay Substation for J.K. Tech., at Faisalabad, Pakistan in 1994. ALSTOM/AEG Reference No. L-21770

TRAINING & COURSES

- Six month technical training in various shops of ALSTOM Factory at Karachi, Pakistan.

- Courses of training in the “Application of Protective Relays to Power Systems” by GEC ALSTHOM (T & D) Stafford, England.

- Courses of training in the International Standards & Specifications “IEC, BS, BSEN for Medium Voltage and Low Voltage Switchgears” by AEG.

- Course on “Seven Basic Tools of Quality Control” by Pakistan Institute of Quality Control.

- Course on “ISO 9000 - Quality Management and Quality Assurance Standards” by

Pakistan Institute of Quality Control.

- Course on “European Quality Award” by AEG.

- Workshop on “Reengineering Concept” by AEG.

- Workshop on Communication & Presentation Skills” by Institute of Training & Consultancy.

- Participated in the Second “KAIZEN Convention” at Karachi.

- SIEMENS protection relay software DIGSI 4 [4.8.11].

- AREVA protection relay software MiCOM S1 Studio.

- Course on High Risk Activities by Alstom.Grid.

COMPUTER SKILLS

Hands on experience M.S. Excel, Word, Power Point and AUTOCAD.