Upload
khaled-omar
View
60
Download
0
Embed Size (px)
Citation preview
EVRMAC
3 Al-Israa Street,
7th Floor,
Mohandesien,
Postal Code: 12411
Cairo,
EGYPT.
Tel / Fax +202 33036022
33036023
33380346
Email: [email protected]
www.evrmac.com
COMPANY PROFILE
ENGINEERING HOUSE OF EXPERTISE
SINCE 1997
OUR GOAL is to deliver PROFITABLE SAFE and SUSTAINABLE PROJECTS & SERVICES to our CUSTOMERS
ABOUT USABOUT USABOUT USABOUT US
We have spent over 17 years building the company
focusing on cost effec�ve and high quality profession-
al engineering services. Although we appreciate our
history, the majority of our �me is spent forging ahead
for the future, by advancing our skills, staying on the
cu#ng edge of technology and fulfilling market needs.
We have a clear vision, a common sense of direc�on
and a culture of performance and delivery. Our aim is
to create a successful, sustainable company for the
long term.
We’ve been surrounded by messages about sustaina-
bility in every aspect of our lives. Here at EVRMaC, we
are proud to have embraced a three-�ered approach
incorpora�ng: living our values, excellent project de-
livery and sustainable growth.
Each element is intertwined with each other, success
in one element being dependent on achievement in
the other two.
It’s a challenge we’ve met throughout our history and
will con�nue to meet with talent, crea�vity, and sensi-
�vity.
We recognize that, in addi�on to our partners, cus-
tomers, and employees, the environment is a silent
stakeholder in our company, and we have an obliga-
�on to behave responsibly toward it. Through ongoing
sustainability efforts, we are working – hand by hand –
with our clients to increase efficiency, reduce waste
and emissions, save water and energy throughout our
ac�vi�es.
MASSEGE FROM MANAGEMENTMASSEGE FROM MANAGEMENTMASSEGE FROM MANAGEMENTMASSEGE FROM MANAGEMENT
Originally founded in Egypt in 1997 as a private mul�disciplinary
engineering consultancy firm, providing engineering, procure-
ment assistance, project management, construc�on assistance,
asset management and integrity services worldwide, from small-
scale to large-scale; and from simple to complex projects.
EVRMaC also developed an extensive range of training services
for energy assets covering engineering design, integrity, opera-
�ons and maintenance.
We deliver quality and technical excellence with agility to meet
our clients’ needs. We have extensive technical experience to
provide our clients with independent advice to ensure maximum
returns. Our global footprint enables us to bring world class ex-
perience to address client needs, in �me and within budget.
EVRMaC works with a wide range of clients including many well-
known interna�onal and na�onal companies and owners.
Engineering is a service-
based industry, so
m a i n t a i n i n g c l i e n t
relationships is the number
one priority. Every client
has different needs. We
talk with them and identify
what is important to them
then we deliver. We always
have to be proactive, to
communicate clearly about
the options available and
about our progress.
We always try to take a
walk in our client’s shoes.
WHOM WE ARE CARE ABOUTWHOM WE ARE CARE ABOUTWHOM WE ARE CARE ABOUTWHOM WE ARE CARE ABOUT
OUR TEAM
OUR CLEINTS
OUR PARTNERS
OUR SOCIETY
OUR VISION OUR VISION OUR VISION OUR VISION
To be one of the leading mul�disciplinary engi-
neering, procurement, construc�on and project
OUR MISSION OUR MISSION OUR MISSION OUR MISSION
To provide high quality, on-budget and on-�me
consul�ng and engineering services for our cus-
tomers using state-of-the-art technology and so6-
ware packages.
Safety
Excellence
Sustainability
Valuing
People Integrity
Team Work
CORE VALUES
WHY WE ARE DIFFERENTWHY WE ARE DIFFERENTWHY WE ARE DIFFERENTWHY WE ARE DIFFERENT
EVRMAC aims to provide the highest quality professional services in engineering, procurement and construc�on.
It’s engineers, technicians and support staff, working with modern and latest facili�es and technologies, posi-
�oned the company in ways that provides quick and quality service to meet our client's growing expecta�ons and
demands. This is what it means for our clients:
♦ Vast experience in engineering projects
♦ Knowledge based and Computer Aided Solu�ons
♦ Familiar with Na�onal and Interna�onal codes and prac�ces
♦ Stability and experience
♦ Provide cost-effec�ve delivery of project outcomes in accordance with recognized quality standards
♦ Reduced project lead �mes
♦ Excellent links to the top professionals in the engineering industry
Al Shabab 8X125 MW Gas Turbine
OUR PROJECTSOUR PROJECTSOUR PROJECTSOUR PROJECTS
We’ve worked on many projects over
many countries and tackled almost every
conceivable challenge in the industry.
From: engineering and project manage-
ment services; up to plant assessment &
fitness for services for: oil & gas, power,
and industrial projects; there is no chal-
lenge too great for our team of experi-
enced engineers, consultants and project
managers.
Tradit ional approaches in
construction suffer from lack of
efficiency, cooperation and
communications as well as gaps
among scopes of different
stakeholders.
We become the driving force behind
every project we work on using new
and innovation approaches, where
entire project team is focused
toward one common goal – success
of the project. This is followed by the
increase and value, reduction of risk,
maximized efficiency and higher
profit margins.
Country: Egypt
Client: Middle Delta Electricity Produc�on Company
Consultant: PGESCo
Contractor: Initec Energia (Spain)
Scope of work: BOP Mechanical CP-118, engineering & PDMS
modelling, piping stress analysis for cri�cal piping, supports
design, piping ISOS and MTOs for the following systems: Main
steam system, Condensate system, Feed water system,
Chemical feed system, Fuel gas system, Lube oil transfer sys-
tem, Fire protec�on system, Service gas system, Compressed
air system, Potable water system, Closed cooling system, Cir-
cula�ng water system, Service water system, Drainage sys-
tem.
Country: Egypt
Client: Middle Delta Electricity Produc�on Company
Consultant: PGESCo
Contractor: Toyota / Toshiba (Japan)
Scope of work: BOP Mechanical CP-118, engineering & PDMS
modelling, piping ISOS and MTOs for the following systems:
Main steam system, Condensate system, Feed water system,
Chemical feed system, Fuel gas system, Lube oil transfer sys-
tem, Fire protec�on system, Service gas system, Compressed
air system, Potable water system, Closed cooling system, Cir-
cula�ng water system, Service water system, Drainage sys-
tem.
Atf Power Plant combined cycle 750 MWAtf Power Plant combined cycle 750 MWAtf Power Plant combined cycle 750 MWAtf Power Plant combined cycle 750 MW
Country: Egypt
Client: Middle Delta Electricity Produc�on Company
Consultant: PGESCo
Contractor: Initec Energia (Spain)
Scope of work: BOP Mechanical CP-118, engineering & PDMS
modelling, piping stress analysis for cri�cal piping, supports
design, piping ISOS and MTOs for the following systems: Main
steam system, Condensate system, Feed water system,
Chemical feed system, Fuel gas system, Lube oil transfer sys-
tem, Fire protec�on system, Service gas system, Compressed
air system, Potable water system, Closed cooling system, Cir-
cula�ng water system, Service water system, Drainage sys-
tem.
Nuberia III Combined Cycle 750 MWNuberia III Combined Cycle 750 MWNuberia III Combined Cycle 750 MWNuberia III Combined Cycle 750 MW
ElElElEl----Tebbin Steam 2×350 MWTebbin Steam 2×350 MWTebbin Steam 2×350 MWTebbin Steam 2×350 MW
Country: Egypt
Owner: Electricite De France – EDF
Contractor: EDF Egyp�an Engineering – 3EC
Scope of work: Subcontracted by 3EC for PDMS modelling,
designing and crea�ng new volumes and areas, drawings pro-
duc�on, clash resolving, site coordina�on, upda�ng the PDMS
model up to As Built.
Country: Egypt
Client: East Delta Electricity Produc�on Company
Consultant: PGESCo
Contractor: Kharafi Na�onal
Scope of work: 3D PDMS Modelling and drawings for:
BOP piping above and underground: service water system,
compressed air system, solar fuel system, fire figh�ng system,
Buildings such as control building, Roods, fencing and other
infrastructure networks, Founda�ons, Equipment such as GE
power islands, GIS substa�on, control s/s, LV transformer,
Steel plaIorms, Underground duct banks and trenches, Tanks
farm.
Country: Egypt
Client: East Delta Electricity Produc�on Company
Consultant: PGESCo
Contractor: Kharafi Na�onal
Scope of work: 3D PDMS Modelling and drawings for:
BOP piping above and underground: service water system,
compressed air system, solar fuel system, fire figh�ng system,
Buildings such as control building, Roods, fencing and other
infrastructure networks, Founda�ons, Equipment such as GE
power islands, GIS substa�on, control s/s, LV transformer,
Steel plaIorms, Underground duct banks and trenches, Tanks
farm.
Suez and Port Said Steam 2×341 MWSuez and Port Said Steam 2×341 MWSuez and Port Said Steam 2×341 MWSuez and Port Said Steam 2×341 MW
Damietta Power Plant 500 MW Gas TurbineDamietta Power Plant 500 MW Gas TurbineDamietta Power Plant 500 MW Gas TurbineDamietta Power Plant 500 MW Gas Turbine
Al Shabab 8X125 MW Gas TurbineAl Shabab 8X125 MW Gas TurbineAl Shabab 8X125 MW Gas TurbineAl Shabab 8X125 MW Gas Turbine
Country: Egypt
Client: East Delta Electricity Produc�on Company
Consultant: PGESCo
Contractor: Alstom Power
Scope of work: Stress analysis calcula�ons for plaIorms
steel structures, connec�ons design, fabrica�on drawings and
materials take off. The plaIorms covered are: Flash box
plaIorm turbine side, Debris filters plaIorms1, 2, 3, 4, 5, Con-
denser PlaIorm, Ball strainer plaIorms 1, 2, Lube Oil Tank
PlaIorm, Control Oil Tank PlaIorm 1, 2, PlaIorm at Thrust
Bearing Pedestal.
Country: Egypt
Client: SUMED
Scope of work: Engineering verifica�on and calcula�ons for
the exis�ng four floa�ng roof tanks to check that they fit for
the purpose of handling fuel oil instead of crude oil. Concep-
tual design including process simula�on and sizing of fired
heaters, centrifugal pumps and pipeline. Process Engineering,
HSE and Loss preven�on, Tanks modifica�ons, Rota�ng
Equipment Engineering, Material Engineering, Piping Engi-
neering, Electrical Engineering and Cathodic Protec�on, In-
strumenta�on and Control Engineering, Pipeline Engineering,
Civil Engineering.
Country:Tunisia
Client: Maretap S.A.
Scope of work: Risk Assessment, FFS and Repair Study: Pro-
vide level 1 and Level 2 fitness for service assessment accord-
ing to API 650, 653 & 579 for 54 m diameter atmospheric
crude oil tank with 200,000 Barrels capacity. Expert advice
and specifica�on of non-destruc�ve tes�ng, sePlement sur-
veying requirements and ovality and ver�cality laser scanning
requirements. Finite Element Analysis of the tank shell ver�-
cality and ovality to assess protec�on against plas�c collapse
and protec�on against buckling as per API 579 Level 3 Fitness
for Service Assessment.
Suez steam thermal 650 MWSuez steam thermal 650 MWSuez steam thermal 650 MWSuez steam thermal 650 MW————PlatformsPlatformsPlatformsPlatforms
SUMED Crude Tanks retrofit to handle Fuel SUMED Crude Tanks retrofit to handle Fuel SUMED Crude Tanks retrofit to handle Fuel SUMED Crude Tanks retrofit to handle Fuel
Crude Oil Storage Tank 70T1Crude Oil Storage Tank 70T1Crude Oil Storage Tank 70T1Crude Oil Storage Tank 70T1
Country: Egypt
Client: Egyp�an Fer�lizers Company (EFC)
Contractor: Uhde Engineering Egypt S.A.E.
Scope of work: Iden�fica�on of areas / systems for revamp-
ing, design of pipe systems for modified sec�ons, prepara�on/
Supervision of final drawings for �e-ins and also for demoli-
�on using PDMS & AutoCAD. Review the plant 3D model for
all design, accessibility, maintainability, constructability for
Revamp Scope. Site visits for data collec�on and field modifi-
ca�ons. Prepara�on of Special Components data sheets for
revamp project. Prepara�on of U�lity and Drainage P&IDs for
revamp project.
Country: Egypt
Client: East Delta Electricity Produc�on Company
Contractor: KSB / EMC
Scope of work: As Built for pipes connected to Water Feed
Pumps. 3D modeling for old pipes and the newly pipes adjust-
ed according to the newly supplied pumps, piping stress anal-
ysis and supports design, piping ISOS, MTO, and piping layouts
Country: Egypt
Client: AlexFert
Contractor: Uhde Engineering Egypt S.A.E.
Scope of work: Prepara�on and checking of all piping design
deliverables such as Piping GAs, Nozzle orienta�ons, Isomet-
rics, pipe support drawings, piping MTO, Tie-in schedule etc..
Prepara�on of Special Components data sheets and duct
specifica�on sheets for revamp project. Prepara�on of U�lity
and Drainage P&IDs for revamp project. Prepara�on of Special
Support drawings.
EFC I & II RevampEFC I & II RevampEFC I & II RevampEFC I & II Revamp
AlexFert Ammonium Sulphate ProjectAlexFert Ammonium Sulphate ProjectAlexFert Ammonium Sulphate ProjectAlexFert Ammonium Sulphate Project
Abo Soultan Power Plant Unit 3 & 1Abo Soultan Power Plant Unit 3 & 1Abo Soultan Power Plant Unit 3 & 1Abo Soultan Power Plant Unit 3 & 1
Oil & Gas Power Pipeline
Industrial Buildings Plant Integrity Training
Behind the large pieces of equipment and heavy machinery, this is a people business. Our success and our cli-
ents’ successes are very much interconnected. Our global professionals are commiPed to building close rela�on-
ships beyond the project. We consistently deliver quality, performance, safety, schedule certainty and sustained
value.
OUR BUSINESS OUR BUSINESS OUR BUSINESS OUR BUSINESS
We are able to provide all of the engineering services from basic
and detail engineering, procurement assistance, construc�on and
project management, and up to commissioning and start-up. We
work with hand-picked manufacturers and selec�ve interna�onal
EPC partners in strategic fields, whom have worldwide references
and strong existence in the market.
We are benefit from skills and experience accumulated along many
working years of our employees, as they have already taken part
in the achievement of great projects in various industrial fields.
We are able to mobilize suitable human and material resources for
efficient interven�on when and where necessary. This is either
through our full �me employees or our interna�onal network of
experts.
Besides being AVEVA sales partner in Egypt, we supply cri�cal pip-
ing, electrical pipe heat tracing, electrical heaters, boilers, turbines,
generators, process equipment and packages.
Sales Partner since 1998
Engineering
Procurement
Construc�on
Management
Agency
1
2
3
4
5
Quality
Health & Safety
Environment
We are commiPed to
providing the highest level of
quality assurance, quality
control, and performance
standards for every project
we undertake. Our employ-
ees are dedicated to provid-
ing the best quality assur-
ance services, and are there-
fore trained extensively on
all the required codes,
standards, designs and any
other applicable procedures.
Our customers always obtain
the same standard of quality
in our projects and services
around the world.
The implementa�on of man-
agement prac�ces aiming to
iden�fy, recognize and elimi-
nate parameters and condi-
�ons which may lead to un-
desirable incidents, along-
side with the systema�c and
con�nuous efforts to foster
and promote a Health &
Safety culture that encour-
ages all personnel to act re-
sponsibly for their own per-
sonal safety and the safety
of those around them, is a
long-standing commitment
of our daily opera�ons.
EVRMaC is commiPed to de-
veloping a long-term sus-
tainable business by mini-
mizing the environmental
impact of our opera�ons
and by making the most effi-
cient use of natural re-
sources and energy. We in-
tegrate care for the environ-
ment into all our business
management procedures
and services delivered to our
customers. We understand
to the environment is a
differen�a�ng factor, a top
priority for our customers.
Excellent quality, health, safety and environmental (QHSE)
management and performance, are the keystones for a successful and
sustainable business. It is more than a set of procedures and
guidelines — it is our core beliefs and our unwillingness to
compromise anything in the name of quality.
CORPORATE SOCIAL RESPONSIBILITY CORPORATE SOCIAL RESPONSIBILITY CORPORATE SOCIAL RESPONSIBILITY CORPORATE SOCIAL RESPONSIBILITY
We also believe that advanced engineering has a cri�cal role to play in
addressing problems that the world faces, and our depth of intelli-
gence in this area has enabled us to set challenging corporate social
responsibility goals. We recognize the unique role that we can play as
a company with an extremely talented workforce, an innova�ve ap-
proach to technology and a strong global brand. We therefore focus
our ac�vity upon three core areas: The environment. The People, and
The Opportunity through innova�on.
QHSEQHSEQHSEQHSE