fs2_acc

2: 5: 50: 95: 98: 100:

SYS19: BASE2 JOB: CRMAIN06-0035-0 Name: 3F-35 DATE: JAN 19 2006 Time: 4:57:35 PM Operator: CP COLOR: CMYK TCP: 15001 Typedriver Name: TS name csm no.: 100 Zoom: 100

STIBOINFO((CRH:66008com:3F:35))

35

PDFINFO C H 0 3 F - 1 3

US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2006 Cooper Crouse-Hinds

3FWLRS and WLRD Wet Location CoversFor NEMA Configuration Receptacle InteriorsFor FS and FD Cast Device BoxesFlush Device Boxes

Application:WLRS and WLRD series wiring device coversare designed to meet the total NECoderequirements for wet locations – Article410-57:

‘‘A receptacle installed in a wet locationwhere the product intended to be pluggedinto it is not attended while in use shallhave an enclosure that is weatherproofwith the attachment plug cap inserted orremoved.’’

WLRS and WLRD series covers are suitablefor use in wet and damp locations:� wherever portable equipment is required� as general purpose utility receptacle covers� for industrial, commercial or residential use� in areas where electrical requirements donot exceed medium duty ratings� to mount FS and FD single-gang or multi-gang boxes having individual cover openings(see Sect. 3F for listings)� to mount on most flush device boxes (seeAccessories)

Features:WLRS and WLRD covers:� self closing spring door assures protectionof wiring device at all times, in wet and damplocations� one piece EPDM gasket providesenvironmental protection of wiring device atall times� EPDM gasketing material offers excellentresistance to ozone, weather andtemperature extremes of –50°F to 260°F� die cast, copper-free aluminumconstruction with aluminum lacquer finishprovides maximum corrosion resistance� positive ground path ensured for allexposed metal partsNEMA configuration receptacle interiors:� comply with NEMA Standards WD-1 andWD-5� grounded through an extra contact in alltypes except 3-phase applications; selfgrounded in duplex variety� back and side wired� offered in single and duplex configurationsfor use with standard plugs� specification grade

Standard Materials:� WLRS and WLRD face plate and cover – diecast copper-free aluminum� Cover hinge spring – stainless steel� Cover screws – corrosion resistant metal� Gasket – ethylene propylene rubber(EPDM)

Standard Finishes:� Copper-free aluminum – aluminum lacquer

Electrical Rating Ranges:� 15 amperes; 125, 250, or 277 volts� 20 and 30 amperes; 125, 250, 277, 480,600, 125/250, 208/120, 480/277 or 600/347volts

Accessories:Flush mounting adapter – WLRA-1 requiredfor mounting on device boxes. (Orderseparately)

Certifications andCompliances:� ANSI/UL Standard 514A� NECode 410-57� OSHA Standards, Subpart ‘‘S’’� NEMA Standards WD-1, 1974 (StraightBlade) and WD-5, 1972 (Locking Type)

Typical installation

Spring Door Covers – with Gasket*

Description Single cover Diameter Duplex cover DiameterCat. # WLRS-1 13⁄8� WLRD-1† 13⁄8�

WLRS-2 11⁄2�

* Patent Number 4,058,358

Dimensions

† Horizontal mount only.

2: 5: 50: 95: 98: 100:



36



3F WLRS, WLRD and WLGF WetLocation Covers

Covers with and without NEMA Configuration Receptacles

Type VoltsNEMAConfiguration

CompleteCover withReceptacleAssy. Cat. #

Spring DoorCover &Gasket OnlyCat. #‡ Type Volts

NEMAConfiguration

CompleteCover withReceptacleAssy. Cat. #

Spring DoorCover &Gasket OnlyCat. #‡

Single Device Duplex Device

For Non-Locking Blade Plugs125V 5-15R WLRS-5-15 WLRS-1 125V 5-15R WLRD-5-15 WLRD-1

250V 6-15R WLRS-6-15 WLRS-1 250V 6-15R WLRD-6-15 WLRD-1

2-Pole3-WireGrounding15 Amp






For Locking Blade Plugs

125V L5-15R WLRS-L5-15 WLRS-1 125V L5-15R WLRD-L5-15 WLRD-1

250V L6-15R WLRS-L6-15 WLRS-1






Wet Location Covers for GFCI Duplex Receptacles

Cat. No. DescriptionWLGF For Flush Device Boxes Spring Door Cover &

Gasket OnlyCat # WLFG

Cat. No. DescriptionWLGF-FS For FS and FD Cast Device Boxes Spring

Door Cover & Gaset OnlyCat. # WLGF-FS

‡ Must be used with a wet locations rated wiring device.

2: 5: 50: 95: 98: 100:

SYS19: BASE2 JOB: CRMAIN06-0037-1 Name: 3F-37 DATE: JAN 19 2006 Time: 4:57:38 PM Operator: GK COLOR: CMYK TCP: 15001 Typedriver Name: TS name csm no.: 100 Zoom: 100


37



3FWP Plugs and DS ReceptaclesFor FS and FD Cast Device Boxes

Weatherproof

Application:WP plugs and DS receptaclesare used:� wherever dust, dirt, moistureand corrosion are a problem� outdoors or in locations wherefrequent washdowns occur, as indairies and food processingplants

Features:DS receptacle housings areused:� with FS and FD cast deviceboxes, either surface mounted orinstalled flush in a wall� with single gang, two gangtandem and multiple gang boxeshaving individual cover openings� a threaded cap whicheffectively seals housing whennot in useWP plugs include:� a molded Neoprene hood withintegral sleeve to seal the cordentrance� an aluminum ring whichclamps the hood to receptaclehousing face, to completewatertight seal when plug is inuse

Standard Materials:� Receptacle housings: body –Feraloy® iron alloy cap – copper-free aluminum� Plug exteriors: hood –Neoprene; fastening ring –copper-free aluminum

Standard Finishes:� Feraloy iron alloy –electrogalvanized and aluminumacrylic paint� Copper-free aluminum –natural� Neoprene – natural (black oryellow)

Electrical RatingRanges:� 15 amperes, 125 volts� 20 amperes, 125, 250 volts

Certifications andCompliances:� UL Standards: 498; 514A� NEMA/EEMAC: WD-1; WD-5� CSA Standard: C22.2 No. 42*

DS Receptacle WP Plugs CC Replacementhousings receptacle

Grounding Type ReceptaclesFor Plugs with U shaped or Round Grounding Contacts

Rating

Cover WithRecept.Cat. # Diagram Style

PlugCat. # Diagram Cord Dia.

Repl.Recept.Cat. #

15 amps125 volts DS96*

NEMA: 5-15R

2-wire,3-pole† WP820

NEMA: 5-15P

.500 to .625 CC55

20 amps,125 volts DS222

NEMA: 5-20R


NEMA: 5-20P

.500 to .625 CC71

20 amps,250 volts DS290

NEMA: 6-20R


NEMA: 6-20P

.500 to .625 CC90

NOTE: For listing of typical FS cast devices boxes, see pages 22 and 23† Third pole grounded.

* Compliance.

2: 5: 50: 95: 98: 100:



38



3F CoversFor FS and FD Condulet® Cast Device BoxesSingle Gang

Blank cover for enclosing splices and tapswhere device not used

Description Material Cat. #Surface Sheet aluminum DS100Flush Sheet steel DSS100

Blank cover with gasket for enclosingsplices and taps where device not used

Description Material Cat. #Surface orflush Cast aluminum DS100G

DS21 DS21G

For standard and 3-pole, 2-wire groundingtype round flush receptacles. Openingdiameter 17⁄16�.

Description Material Cat. #Surface Sheet steel DS21Surface Sheet

aluminum DS21-SASurfaceor flush

Feraloy®

iron alloywith gasket DS21G

For GFI receptacles.

Description Material Cat. #Surface Sheet steel DS23-GFI

For flush plug receptacle requiring 15⁄8�opening diameter.

Description Material Cat. #Surface Sheet steel DS35

For duplex convenience receptacles.

Description Material Cat. #Surface Sheet steel DS23Surface Sheet

aluminum DS23-SAFlush Sheet steel DSS23

For standard and 3-pole, 2-wire groundingtype duplex convenience receptacles.Gasket included.

Description Material Cat. #Surfaceor flush

Feraloy®

iron alloy DS23G

2: 5: 50: 95: 98: 100:



39



3FCoversFor FS and FD Condulet® Cast Device BoxesSingle Gang

For square handle general use snap ortoggle switches – unguarded.Description Material Cat. #Surface Sheet steel DS32Surface Sheet

aluminumDS32-SA

For square handle general use snap ortoggle switches – guarded.Description Material Cat. #Surface orflush

Feraloy® ironalloy withgasket DS32G

Surface Sheet steel DS52

WLRS and WLRD Wet Locations Covers†

For NEMA Configuration Receptacles*

For single convenience receptaclesSpring door with gasketWLRS-1 cover takes 15 and 20 amperenon-locking type and 15 ampere lockingtype receptacles*WLRS-2 cover takes 20 ampere lockingtype receptacles*Description Material Cat. #Surface Die cast WLRS-1

aluminum WLRS-2

Use WLRA-1 adapter for mounting on flushdevice boxes

Flush Device Adapter

Adapter plate for mounting WLRS/WLRDcovers to flush device boxes.Cat. #WLRA-1

Also can be used to mount all covers withfour corner screws listed on pages 35 to 42 toflush device boxes.

For duplex convenience receptacles*Spring doors with gasketWLRD-1 cover takes 15 and 20 amperenon-locking type and 15 ampere lockingtype receptacles*Description Material Cat. #Surface Die cast WLRD-1

aluminum

Use WLRA-1 adapter for mounting on flushdevice boxes.

† Must be used with a wet locations rated wiring device.

* Refer to pages 37 and 38 for receptacle specifications andlistings of complete receptacle/cover combinations.

2: 5: 50: 95: 98: 100:



40



3F Raintight Covers (Gasket Included)For FS and FD Condulet® Cast Device BoxesSingle Gang

For general use snap switches. Includesgasket.Description Material Cat. #For standardON-OFFoperation

Copper-freealuminum

DS181

For general use snap switches. Includesgasket.Description Material Cat. #For standardON-OFFoperation.With hole forlock

Die castaluminum

DS185

For general use snap switches. Includesgasket.Description Material Cat. #For standardoperation.MarkedON-OFFhandle

Castaluminum

DS128

2: 5: 50: 95: 98: 100:



41



3FSwitches and Motor Control PushButton CoversFor FS and FD Condulet® Cast Device BoxesSingle Gang

Raintight

For manual motor starting switches. FitsFS and FD boxes. Takes Westinghouseswitches MST01 (1-pole) and MST02(2-pole). Includes gasket.Description Material Cat. #For standard ON-OFF operation

Feraloy ironalloy

DS199

Furnished with buttons for operating motor controlpush button switches. Includes gasket.

Push ButtonsDescription No. Color Material Cat. #Button (normallyopen) markedSTART

1 Green Feraloy iron alloy DS171F

Button (normallyclosed) markedSTOP

1 Red Feraloy iron alloy DS171G

Button (normallyopen) markedSTART and button(normally closed)marked STOP

1

1

Green

Red

Feraloyiron alloy

DS171

Description No. Color Material Cat. #Two push button 2 Black Feraloy iron alloy DS171J

NOTE: Markings other than shown can be supplied.Standard markings available are as follows:

HAND CLOSE OFF AUTO. UP RUNEMER. DOWN JOG FORWARD START RESETREVERSE STOP TRIP OPEN ON TESTLGT. ON

Heavy duty motor control push button switchNo. of NormalButtons Positions Cat. #1 1 circuit universal ED11

2 2 circuits universal ED12

DS Covers use the switches shown in the list below.Cover Takes Switch Cover Takes SwitchDS171 ED12 DS171F ED11DS171G ED11 DS266 ED12DS265 ED11

2: 5: 50: 95: 98: 100:



42



3F Covers, Gaskets, Pilot Lights, AdaptersFor FS and FD Condulet® Cast Device BoxesSingle Gang

For pilot light units (furnished with jewels)Jewel

Description Material Color Cat. #Surface Sheet steel Red DS24

For pilot light units (furnished with jeweland gasket).

JewelDescription Material Color Cat. #Surface orflush

Feraloyiron alloy

Red DS24G

Pilot light unit (without transformer)Circuit LampVoltage Base Watts Cat. #110 Candelabra 6 C3310

Pilot light (with transformer)†, FD onlyCircuit LampVoltage Base Watts Cat. #440 Candelabra 6 C333

EXF Extensions (takes covers and flushrectangular wiring devices, or plugreceptacles with housings)Ext.Depth Cat. #

1 EXF1121⁄2 EXF21

FS Flush mounting adapter (can be usedwith multi-gang bodies having individualcover openings. Furnished with gasketand screws)Mtg.Style Cat. #Wall FS031

Gaskets for use between device boxes andcovers.Material Cat. #Neoprene GASK91‡

† Transformer 50-60 cycle, 440/110 volts.

‡ Not recommended as watertight.

2: 5: 50: 95: 98: 100:

SYS19: BASE2 JOB: CRTEST06-3043-0 Name: 3F-43 DATE: JAN 19 2006 Time: 6:16:08 PM Operator: JB COLOR: CMYK TCP: 15001 Typedriver Name: TS name csm no.: 100 Zoom: 100


43US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright© 2006 Cooper Crouse-Hinds


3FCoversFor FS and FD Condulet® Cast DeviceBoxes Two Gang

Crouse Hinds1st Proof Authors Alterations

S A H M N

For flush general use snap switches withsquare handlesDescription Material Cat. #For standardduplex flushreceptacles.Surface

Sheet steel S32232

For flush general use snap switches withsquare handlesDescription Material Cat. #For round plugflush receptacles.Surface

Sheet steel S32212

For standard and 2-wire, 3-polegrounding †Description Material Cat. #For round flushreceptacles.Surface

Sheet steel S212

For duplex convenience receptacles,standard and 2-wire, 3-pole groundingDescription Material Cat. #Surface Sheet steel S232

For GFI receptaclesDescription Material Cat. #Surface Sheet steel S232-GFI

For round flush receptacles, duplexconvenience receptacles, standard and2-wire, 3-pole groundingDescription Material Cat. #Surface Sheet steel S21232

For 20 amp., 250 volt receptaclesDescription Material Cat. #2-pole,‡ Surface Sheet steel S612

Blank. Feraloy® iron alloyDescription Material Cat. #Surface Sheet steel S1002Surface or flush Feraloy iron

alloyS1002G*

Surface or flush Copper-freealuminum

S1002G-SA

For flush general use snap switches withsquare handlesDescription Material Cat. #Surface Sheet steel S322

For flush general use snap switches withsquare handlesDescription Material Cat. #Surface or flush Feraloy iron

alloyS322G

* Includes gasket.

� Hole diameter 1.688�.

† Hole diameter 1.406�.

‡ Hole diameter 2 5/32�.

2: 5: 50: 95: 98: 100:



44



3F Covers, Gaskets, Wiring DevicesFor FS and FD Condulet® Cast Device BoxesTwo, Three, and Four Gang

With operating mechanism and gasketDescription Material Cat. #Two gang. Foroperation ofgeneral use snapswitches. Surfaceor flush

Feraloy® ironalloy

DS1282*

Description Material Cat. #Three gang withgasket. Forexternal operationof general usesnap switches.Surface or flush.Includes gasket.

Feraloy ironalloy

DS1283*

Blank.Description Material Cat. #Surface Sheet steel S1003Surface or flush Feraloy iron

alloyS1003G*

Surface or flush Copper-freealuminum

S1003G-SA

For flush general use snap switches withsquare handlesDescription Material Cat. #Surface, three gang Sheet steel S323

Blank. With gasketDescription Material Cat. #Surface or flush Feraloy iron

alloyS1004G

For flush general use snap switches withsquare handlesDescription Material Cat. #Surface, four gang† Sheet steel S324

Gasket for use between device box andcoverDescription Material Cat. #Two gang Rubber GASK434Three gang Rubber GASK460Four gang Rubber GASK461

† For FS094 and FD094 boxes.

* Includes gasket.

Documents

fs2_acc