GU_20121228_030(Notice of Solution to the Problem of Some Parameters Cannot Be Left Un-configured in CMX)

Internal Use Only▲

7*24 Hotline: +86-755-26771911， +86-755-26771900

After-Sales Technical Notice of GU Product Support Dept.

Serial number GU_20121228_030 Notice classification

■Execution□Notification

Contact person Ma Chunxin Contact number +86-18621908932

Deadline 2013-1-15

Applicable product GU-OMCB

Applicable software version

OMCBV4.11.10.14P05Applicable hardware version

Issued toGU Product Support Dept., Sales Divisions, Network Service Office

Operator All

SubjectNotice of Solution to the Problem of Some Parameters Cannot Be Left Un-configured in CMX

Symptom Description and Root Cause

During the data modification with CMX, when the MO template is exported from OMM, some fields

that do not need to be configured will be set as the default value automatically. Consequently,

when the MO template is imported into OMM after the data modification, the OMM will prompt that

the values of some fields are not valid, and errors will also be reported if these values are not

configured.

Solution

Perform the steps in Operation Procedure to replace the server and client files.

Version free from this problem: V4.11.10.14P06

Execution Conditions & Matters for Attention

Back up the original file before the operation.

ums-svr\zxomcb\MEDIATOR\SDRMAP\mediator-sdrmap-common-api.par

Note: Back up the file in a different directory or PC. Make sure the backup file is not saved in the

original directory.

Operation Procedure

On the OMM client of the PC:

1. Back up the original file.

Confidential and Proprietary Information of ZTE CORPORATION. 1/4


7*24 Hotline: +86-755-26771911， +86-755-26771900

ums-clnt\zxomcb\MEDIATOR\SDRMAP\mediator-sdrmap-common-api.par\mediator-

sdrmap-common-api.jar

ums-clnt\zxomcb\MEDIATOR\SDRMAP\mediator-sdrmap-common-api.par\conf\

mediator-table-operator.xml

2. Overwrite the files in the above directories on the client with the attachment, clear the …\

ZX-OMMB\ums-clnt\temp directory, and restart the client.

Replaceing the File on SBCX Server

Master SBCX Only

1. Stop OMMB server. Ftp the attached file to the server in bin mode. Unzip the file and

replace the following files on the server and client respectively.

ums-svr\zxomcb\MEDIATOR\SDRMAP\mediator-sdrmap-common-api.par\mediator-


ums-svr\zxomcb\MEDIATOR\SDRMAP\mediator-sdrmap-common-api.par\conf\






2. Delete all the temporary files in the ums-svr/temp and ums-clnt/temp folders. Restart

the server.

3. Click the Force to Upload button to upload the OMMB client files to EMS client.

Note: Replace all the OMMBs connected to EMS before executing Force to Upload. Otherwise,

the OMMB client connected to EMS may be the one not replaced.

Master/Slave SBCX

1. Log in to the slave SBCX, and ftp the attached file to the above mentioned directory of the

slave SBCX in the bin mode.



7*24 Hotline: +86-755-26771911， +86-755-26771900

2. Stop the OMMHOST of the slave SBCX and replace the following files on the client and

server respectively.









3. Delete all temporary files in the ums-svr/temp and ums-clnt/temp folders.

4. Log in to the master SBCX, and ftp the attached file to the above mentioned directory of the

master SBCX in the bin mode.

5. Stop the OMMHOST of the master SBCX and replace the following files.









6. Delete all temporary files in the ums-svr/temp and ums-clnt/temp folders.

7. Start the OMMHST on the master SBCX. Log in to the slave SBCX, and start the

OMMHOST of the slave SBCX (by the telnet command from the master SBCX through

the master/slave channel or by local access).



7*24 Hotline: +86-755-26771911， +86-755-26771900

8. Click the Force to Upload button to upload the OMMB client files to EMS client.

Note: Perform Force to Upload after all the zipped packages on OMMB connected to EMS are

replaced. Otherwise, the OMMB client connected to EMS may be the one not replaced.

Rollback Solution

Copy the backup file back to the original directory and replace the file with the same name.

Attachment:

<Attach the document here if necessary>

Drafted by Ma Chunxin Date 2012-12-25

Reviewed by Chen Taiming Date 2012-12-26

Approved by Zhang Zhongqi Date 2012-12-27

Issued by Sun Jingjing Date 2012-12-28


Documents

GU_20121228_030(Notice of Solution to the Problem of Some Parameters Cannot Be Left Un-configured in CMX)