OCS

Document codeProduct nameOCS

Target readersOCS Product versionOCS

Edited byOCSDocument versionV1.0

Guide for OCS Maintenance AssistantDrafted by:Liu yangDate:2009-6-30

Reviewed by:Date:

Reviewed by:Date:

Approved by:Date:

Huawei Technologies Co., Ltd.All Rights Reserved

Revision RecordDateRevised versionDescriptionAuthor

2009-6-30V1.0Draft completed.Liu Yang

Contents2Chapter 1 Introduction

2Chapter 2 Installation

22.1 Software download

22.2 Install Maintenance Assistant

22.3 Configuration

22.4 Install software

22.5 Configuration

2Chapter 3 Maintenance Assistant

23.1 Device Maintenance

23.2 Toolkit

23.3 Message Pool

Keyword:Summary:Abbreviation list:Reference list:Chapter 1 Introduction

This article is guide for OCS Maintenance Assistant. In this article, the offline installation is the example.=Chapter 2 Installation2.1 Software downloadYou can download the Maintenance Assistant software from website by this linkhttp://support.huawei.com/support/pages/editionctrl/catalog/ShowVersionDetail.do?actionFlag=getDetail&node=000001437407&colID=ROOTENWEB|CO0000000174You can download the software Breeze MainAst-1_1_4_66-win(offline).2.2 Install Maintenance Assistant1. Choose the language.

2. Choose the path.

3. Choose the components (full)

2.3 ConfigurationIn this window, input the username and password admin/admin. You can choose the option save account and auto login, and then you can start the mainast without login.

Choose the OCS option, input your support website username and password, it used for download the softwares and documents.

You can see the pop information about the new document detect when you start the mainast.

2.4 Install softwareChoose upgrade

Choose offline update

Start installation

2.5 ConfigurationAdd device

Example:

If you add a CBP device, there are three service packages for CBP device(ENIP_CBP/ENIP_ENIP/ENIP_SMDB). You should input the cbp username and password for CBP and ENIP package. You should input smdb username and password for SMDB package. Then you should create the device.

If you add a BMP device, there are three service packages for BMP device(ENIP_BMP/ENIP_ENIP/ENIP_DB). You should input the bmp username and password for all packages. Then you should create the device.

If you add a SCP device, there are one service packages for SCP device(ENIP_SCP). You should input the scu username and password. After you work for creating device, you can show your device in this window.

Chapter 3 Maintenance Assistant 3.1 Device MaintenanceYou can execute the command directly by clicking the command list of left menu. Then the command result will be shown in right menu.

3.2 ToolkitYou can find the tools from the Toolkit menu.

If you click the right button of mouse in the tool icon, there is the menu that you can find the documents directory of this tool.

Some tools can share the device information with Maintenance Assistant, just like collectdata/auditsuit/infquery. If you add the devices in Maintenance Assistant, you can use that devices in these tools directly. In the future, Breeze Ichek and other tools will also support this fuction.

Collectdata:

Infquery:

Auditsuit:

3.3 Message Pool

Download all:

Huawei Technology Proprietary