handing tools - cpmc-cn. · PDF fileHANDING TOOLS ... Handle pin iwth washer and cotter pin 3769 0.5 0.2 ... Rough neck proven by field test and roughneck proof by design and

HANDING TOOLS

http://www.cpmc-cn.com Page 1

TABLE OF CONTENTS

DESCRIPTION PAGE

ROTARY SLIPS..................…...............…………………………..…...…2

DRILL COLLAR SLIPS....…........................……...…..….………...........4

CASING SLIPS.............…..........................…..……...…...…………......6

SAFETY CLAMP..........….............................…………..…...……….......7

BNC TYPE ELEVATOR...………..…………………….......……………...9

SSC TYPE ELEVATOR .................................……….......………….....14

SLIP TYPE ELEVATOR.........................…….…….………...……….....17

CASING ELEVATOR/SPIDER...................…………..………...…........19

SUCKER ROD HOOK/ELEVATOR............ .….…......………………....21

KELLY BUSHING...........……….…………............……………………...22

MAST BUSHING ..........................……..…………….......…….………..23

CASING BUSHING .............................………………............…………24

MANUAL TONG.................................………...........……………….…..26 .

HYDRAULIC DRILL PIPE TONG................................……............…..28

HYDRAULIC CASING TONG................................……..........………...30

HYDRAULIC TUBING TONG................................……............……….31

POWER STATION................................……..........………………….....32

HANDING TOOLS


ROTARY SLIPS

Drill Pipe Slips SDXL, SDML, SDS The SD Style Drill Pipe Slip has a unique full wrap around grip and insert design to prevent damage to the drill pipe. The design of the slips with its dove tail slots holds the inserts securely in place and are easily changed for different size pipes. Three different sizes; short, medium and long covers the shallowest and deepest wells.

SDS-Short Rotary Slips

Slip Body size (inch) 3 1/2 4 1/2

API pipe size (OD inch) 2 3/8 2 7/8 3 1/2 3 1/2 4 4 1/2

Parts No. slips c/w inserts 3901 3903 3905 3907 3909 3911

Weight. Slips c/w inserts lb (kg) 117 (53) 111 (50) 107 (48.5) 143 (65) 136 (62) 127 (58)

Qty of inserts 24 24 24 36 36 36

Weight of inserts lb (kg) 21 (9.5) 16 (7) 10 (4.5) 32 (14.5) 25 (11) 16 (7)

HANDING TOOLS


SDML-Medium Rotary Slips

Slips Body Size (inch) 3 1/2 4 1/2 5 5 1/2

API pipe size (OD inch) 2 3/8 2 7/8 3

1/23 1/2 4

4

1/24

4

1/25 4 1/2 5 5 1/2

P/N Slips c/w inserts 15524 15523 155

2215563 15564

155

6515567

155

68

155

69 15571

155

72

1557

3

Weight slips c/w inserts

lb (kg)

193

(87.5)

188

(85)

180

(81.

5)

207

(94)

199

(90)

188

(81.

5)

204

(92.5)

196

(89)

185

(84)

200

(91)

185

(84)

181

(82)

Qty of inserts 30 30 30 45 45 45 45 45 45 45 45 45

Weight of inserts lb (kg) 26

(12)

22

(9.5)

13

(6)

39

(17.5)

31

(14)

20

(9)

39

(17.5)

31

(14)

20

(9)

39

(17.5)

31

(14)

20

(9)

SDXL-Extra Long Rotary Slips SDXL & SDL Inserts

Slips Body Size (inch) 4 1/2 5 5 1/2

API pipe size (OD inch) 3 1/2 4 4 1/2 4 4 1/2 5 4 1/2 5 5 1/2

P/N Slips c/w inserts 15515 15514 15513 15518 15517 15516 15521 15520 15519

Weight slips c/w inserts

lb (kg)

229

(104)

219

(99) 205(93)

237(10

5)

227(10

3)

213(96.5

)

234(10

6) 224(101.5) 210(95)

Qty of inserts 54 54 54 54 54 54 54 54 54

Weight of inserts lb (kg) 47(21) 37(17) 23(10.5) 47(21) 37(17) 23(10.5) 47(21) 37(17) 23(10.5)

,

HANDING TOOLS


DRILL COLLAR SLIPS

DCS DRILL COLLAR SLIPS Each segment of Varco design Drill Collar slips is a rugged drop forging, with an extra long back to provide maximum support to the circular button gripping elements. Full wrap-around design and circular buttons assure positive holding and slip setting. Drill Collar slips are flat on top to accommodate the MP Clamp

DCS-Multi-segment Drill Collar slips

Slip Type DCS-S DCS-R DCS-L

Drill Collar OD (Inch) 3-4 4- 4

7/8 4 1/2-6 5 1/2-7

6 3/4-8

1/4 8-9 1/2

8

1/2-10

9

1/4-11

1/4

11-12

3/4 12-14

P/N slip c/w Circular Buttons 2572 2573 2552 2550 2503 2507 2530 2508 2534 2536

Weight, complete set, lb (kg) 112

(51)

103

(47)

120

(54)

112

(51)

154

(70)

173

(78)

185

(84)

198

(90)

213

(96)

207

(94)

Total number of segments 7 7 9 9 10 12 13 14 17 17

total number of intermediate

segments 5 5 7 7 9 10 11 12 15 15

total number of hinge pins 6 6 8 8 10 11 12 13 16 16

use in insert Bowel Number API or No.3 No.3 No.2 No.1

HANDING TOOLS


Parts List

Slip type DCS-S DCS-R DCS-L

Description P/N lb kg P/N lb kg P/N lb kg

Segment- Right End 2568 11 5 2554 10 4.5 2510 12 5.5

Segment- left End 2569 11 5 2555 10 4.5 2511 12 5.5

Segment-Intermediate 2570 11 5 2556 10 4.5 2512 12 5.5

Hinge pin w/Cotter Pin 2525 - - 2525 - - 2520 0.7 0.3

Handle Pin w/washer & Cotter Pin 3769 0.5 0.2 3769 0.5 0.2 3769 0.5 0.2

Handle for right & left end Segment 3765 3.5 1.5 3765 3.5 1.5 3765 3.5 1.5

Handle for intermediate segments 3766 4 2 3766 4 2 3766 4 2

Retaining Cotter pin 71936 - - - - - 71936 - -

Retaining screw w/lock washer --- - - 3748 - - - - -

Circular Buttons for DCS Drill Collar slips

Weight Slip set Drill Collar OD (in) P/N

lb kg Qty

3-4 2628-49 13 6 49 DCS-S

4-4 7/8 2620-49 8 3.5 49

4 1/2-6 2628-63 16 7 63 DCS-R

5 1/2-7 2620-63 11 5 63

6 3/4-8 1/4 2630-88 15 7 88

8-9 1/2 2630-96 16 7 96

8 1/2-10 2627-104 26 12 104

9 1/4-11 1/4 2630-112 19 8.5 112

11-12 1/4 2625-136 13 6 136

DCS-L

12-14 2630-136 16 7 136

,

HANDING TOOLS


CASING SLIPS

CASING SLIPS CMSXL The CMSXL Style are full wrap around grip style slips to meet the heavy casing loads, they use button type inserts for maximum grip and range in sizes from 6-5/8" – 30" O.D. casing.

Weight Description P/N

lb kg

Segment-Right end 5320 12 5.5

Segment --Left end 5321 12 5.5

Segment-Intermediate 5322 12 5.5

Hinge pin with Cotter Pin 2525 0.6 0.3

Handle pin iwth washer and cotter pin 3769 0.5 0.2

Handle for right and left segment 3765 3.5 1.5

Handle for intermediate segment 3766 4 2.0

Retaining screw with lock washer 3748 0.3 0.14

Description

Pipe OD (inch) 24 26 30

P/N-Slip c/w Circular

Buttons 5338 5344 5340

Weight c/w circular

buttons lb (kg)

276

(125)

296

(134) 319 (145)

Total No. Segments 13 14 16

Total No. Hinge spacer 12 13 15

Circular Buttons for CMS-XL & CP-S slips Circular Buttons

Slip setCasing

OD (in) P/N lb kg qty

6 5/8 2628-144 36 16 6 5/8

7 2619-144 36 16 7

7 5/8 2630-144 24 11 7 5/8

8 5/8 2630-156 26 12 8 5/8

9 5/8 2630-168 28 13 9 5/8

10 3/4 2630-180 30 14 10 3/4

11 3/4 2627-204 51 23 11 3/4

13 3/8 2630-216 36 16 13 3/8

16 2631-252 43 19.5 16

18 5/8 2626-300 60 27 18 5/8

20 2631-312 52 23.3 20

24 2631-360 60 27 24

26 2631-396 64 29 26

CMS-XL

4010301

30 2631-444 72 32.5 30

24 2631-156 26 12 24

26 2631-168 28 13 26

CP-S

4010302 30 2631-192 32 14.5 30

HANDING TOOLS


SAFETY CLAMP

MP SAFETY CLAMP The MP Multipurpose Safety Clamp can act as a shoulder elevator, if needed, or fitted with lifting eyes to handle large diameter pipe. This versatile tools can also be inverted and fitted with hold down lugs for use in all types of snubbing operations. For maximum durability and long life in the field, interchangeable handles, lifting eyes and hold down lugs are forged, heat-treated steel

HANDING TOOLS


Qty Model Rang (inches) P/N

Links Gripping Dies lb kg

2 7/8-4 1/8 33030 7 8 83 37.5 MP-S

40201 4-5 33031 8 9 91 41

4 1/2- 5 5/8 33011 7 8 81 37

5 1/2-7 33012 8 9 89 40

6 3/4-8 1/4 33013 9 10 97 44

8-9 1/4 33014 10 11 105 47.5

MP-R

40202

9 1/4-10 1/2 33015 11 12 113 51

10 1/2-11 1/2 33016 12 13 121 55

11 1/2-12 1/2 33017 13 14 129 58.5

12 1/2-13 5/8 33018 14 15 137 62

13 5/8-14 3/4 33019 15 16 145 66

MP-M

40203

14 3/4-15 7/8 33020 16 17 153 69.9

15 7/8-17 33021 17 18 173 78.5

17-18 1/2 33022 18 19 181 82

MP-L

40204 18 1/8-19 3/8 33023 19 20 189 86

19 3/8-20 3/8 33024 19 20 196 89

20 3/8-21 1/2 33025 20 21 204 92.5

21-22 5/8 33032 21 22 212 96

22 5/8-23 3/4 33033 22 23 220 100

23 3/4-24 7/8 33034 23 24 228 103.5

24 7/8-26 33035 24 25 236 107

26- 27 1/8 33036 25 26 244 110.5

MP-XL

40205

29 3/8-30 1/2 33039 28 29 336 152.5

HANDING TOOLS


BNC TYPE ELEVATOR

BNC TYPE ELEVATOR Varco's line of BNC 100, 150, 175, 250, and 350 ton capacity drill pipe elevators stand up to the toughest oilfield conditions. Easy to use, simple to maintain, and ruggedly built. Lifting and closing requires 1/3 less effort than other elevators. The hanging angle is most convenient for latching onto a stand of pipe, whether by the floorman or the derrickman. The narrow profile latch provides a straight opening, so pipe can be dropped straight in. The elevator is balanced in design for easier handling. These Varco elevators feature a special safety latch mechanism. Rough neck proven by field test and roughneck proof by design and construction. The Front and rear hinge pins are oversized and made of high strength alloy for maximum life and minimum maintenance. These features mean less wear and longer life. Varco Elevators are fully API Spec. 8A rated. To assure quality, every elevator is pull tested to 11/2 times rated load, and then magnetic particle inspected before shipment. The Varco BNC Drill pipe elevators handle 2-3/8 inch thru 5 inch OD drill pipe with 18-degree upset tool joints. The inside surface of the elevator is induction hardened to provide maximum strength and long service. Less wears means less replacement and lower maintenance cost.

.

BNC 18-Degree type DP Elevator

HANDING TOOLS


MGG Type DP Elevator

18o Type Elevators G Series G series elevators are similar in design and construction to the A series, except they are bored to fit the contour of 18o type drill pipe. They are constructed in two halves of practically the same weight for better balance, making them easier to handle; easier to latch on and take off the pipe. In open position, a G-series elevator hangs ready for closing at any point below the upset of the pipe. Safety features include guarded operating handles to help prevent accidents to operators and an extra handle at the rear of the elevator for easier, safer operation. Collar Type Elevators A Series Center-latch elevators are for handling collar type drill pipe, casing and tubing. All type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All type elevators feature latch and safety latch lock combinations. Safety features include guarded operating handles to help prevent accidents to operators and an extra handle at the rear of the elevator Side Door Type Elevators X Series The X-series elevators handle all sizes of collar-type tubing, drill pipe and casing. The SLX has a shielded safety latch mounted on the elevator door. The shield protects the latch from accidental opening. Both latches operate from a single handle, and then automatically relatch when the elevator door is closed. The Type SX side- door elevator, designed for handling large, collar-type casing, is a sturdier, safety- latch-equipped version of X-series elevators.

HANDING TOOLS


SLX Elevator

Air Operated Elevators Varco BJ offers a complete line of air operated elevators with rated capacities ranging from 150 to 500 ton capacity. The TA-150 is a center-latch elevator for handling zip groove drill collars from 4 3/4" to 11 1/2" with a capacity of 150 tons. The GGis a center-latch elevator for handling 18 degree external upset drill pipe from 4" to 5 1/ 2" with a rated capacity of 350 tons. The HGG handles the same pipes from 4Ў± to 6 5/8" with a 500 ton rated capacity. The MGG is also a center latch elevator for handling 18 deg. external upset drill pipe sizes 3 1/2" to 5 1/2Ў± with a rated capacity of 250 tons. The HYC is a slip type elevator to handle tubulars from 2 7/8" t hrough 7 5/8" rated capacity 250 ton.

Elevator Selection Chart

Pipe Size weight inch mm

Type Cap. tons lb kg

18-Degree center latch elevator G Series 2 3/8~5 60~127 MG 100 200 91

2 3/8~3 1/2 60~89 RGG 150 308 140

3 1/2~5 1/2 89~140 MGG 250 575 261

3 1/2~5 1/2 89~140 MGG AO 250 720 327

4~ 5 1/2 102~140 GG 350 715 324

4~5 1/2 102~140 GG AO 350 1018 463

4~ 6 5/8 102~168 HGG 500 1000 454

4~6 5/8 102~168 HGG AO 500 1500 680

HANDING TOOLS


,



18-Degree center latch elevator G Series w/ wear Bushing 3 1/2~ 5 1/2 89-140 MGG 250 585 266

3 1/2~5 1/2 89-140 MGG AO 250 730 332

4~5 1/2 102-140 GG 350 725 329

4~5 1/2 102-140 GG AO 350 1028 468

4 1/2~5 1/2 114-140 HGG 500 1010 459

5~ 6 5/8 127-169 HGG 500 1010 459

4 1/2~5 1/2 114-0140 HGG AO 500 1500 685

5-6 5/8 127-168 HGG AO 500 1500 685

Bottleneck Center Latch Elevator

4~5 1/2 104-140 BNC 350 880 400

Collar Type Side Dollr Elevator

1.660~2 7/8 42~73 SLX 65 50 23

2 3/8~2 7/8 60~73 SLX 100 75 34

3 1/2~4 89~102 SLX 100 105 48

4 1/2~5 1/2 110~140 SLX 100 175 79

5 1/2~8 5/8 140~219 SLX 150 325 147

9 5/8~10 3/4 245~273 SLX 150 420 191

11 3/4~13 3/8 298~340 SLX 150 500 227

16 406 SLX 150 575 261

18 5/8~20 473~508 SLX 150 700 318

26~30 660~762 SLX DD 150 1320 600

6 5/8~7 5/8 168~194 SSD 250 600 273

8 5/8~10 3/4 219~273 SSD 250 620 282

11 3/4~14 298~356 SDD 250 635 289

18 5/8~20 473~508 SX 250 1100 499

22~24 1/2 559~622 SLX 350 1000 454

9 5/8~13 3/8 244~340 SX 350 1200 544

9 5/8~13 3/8 244~340 SX 500 1100 499

16 406 SX 500 1200 544

HANDING TOOLS




Collar type center latch Type Elevator 1.050~2 1/2 27~73 TA 35 39 18

1.660~ 2 7/8 42~73 TA 65 65 29

3 1/2~4 1/2 89~114 TA 65 83 38

2 3/8~2 7/8 60~73 TA 100 100 45

3 1/2~5 89~127 TA 100 158 72

4 3/4~8 5/8 121~219 TA 100 410 186

4 1/2~8 5/8 114~219 TA 150 430 195

4 3/4~8 5/8 121~219 TA AO 150 530 240

8 1/2~11 1/4 216~289 TA 150 430 195

8 1/2~11 1/4 216~289 TA AO 150 550 250

2 3/8~4 1/2 60~114 RGA 200 162 73

3 1/2~7 102~178 GA 350 555 252

3 1/2~7 102~178 GA AO 350 725 330

7~7 5/8 178~194 GGA 350 695 316

7~7 5/8 178~194 GGA AO 350 998 354

HANDING TOOLS


SSC TYPE ELEVATOR

SSC TYPE ELEVATOR(Square Shoulder Center Latch Elevator) Like all Varco products, the 100 and 150 ton SSC Elevators are distinguished by their innovative design, engineering excellence and metallurgical quality. These elevators are characterized by features which improve crew efficiency and reduce fatigue. Pipe can be stabbed straight into the SSC elevator. Varco's narrow profile latch design provides a wide, clear opening without obstruction, allowing crews to work more quickly. Lifting and closing the Varco elevator requires a fraction of the force needed to lift the close other elevators, because the SSC is so well balanced. An oversized hinge pin provides maximum distribution of load to minimize wear. All elevators are fully API rated. To assure individual quality, each elevator is pull-tested to 1 1/2 times rated load and then magnetic particle inspected before shipment. The Varco SSC elevator is available in three frame sizes and can handle tubular goods ranging in size from 2 3/8 thru 8 5/8 inches.

Rated Load Cap Model Varco Pipe size OD

KN Tons

SSC65 TA-65 2 3/8, 2 7/8 585 65

SSC100 TA-100 2 3/8, 2 7/8, 3 1/2, 4, 4 1/2, 5 900 100

SSC125 2 3/8, 2 7/8, 3 1/2 1100 125

SSC150 MRA-150 2 3/8, 2 7/8, 3 1/2, 4, 4 1/2, 5, 5 1/2 1350 150

SSC250 3 1/2, 4, 4 1/2, 5, 5 1/2 2250 250

SSC350 4 1/2, 5, 5 1/2 3150 350

HANDING TOOLS


Square Shoulder Side Door Elevator (SSD Type).

A range of models are available to handle drill collar sizes from 6 3/4 thru 11 1/4 inches OD and casing sizes from 6 5/8 to 20 1/2 inches OD.

Varco Elevators hang at less of an angle than other elevators. This means that they require far less effort to lift and close, reducing crew fatigue and improving performance. Drill Collar or casing can be stabbed directly into Varco elevators and the tool's narrow profile latch design provides a wide, clear opening, without obstruction.

All Varco elevators are fully API Rated and meet Varco's tough standards for quality, and rugged dependability.

Pipe sizes weight Inch mm

Type Cap. Ton lb kg

1.05~ 2 1/2 27-73 TA 35 39 18

1.66~ 2 7/8 42-73 TA 65 65 29

3 1/2~4 1/2 89-114 TA 65 83 38

2 3/8~ 2 7/8 60-73 TA 100 100 45

3 1/2-5 89-127 TA 100 158 72

4 3/4-8 5/8 121-219 TA 100 410 186

4 1/2-8 5/8 114-219 TA 150 430 195

4 3/4- 8 5/8 121-219 TA AO 150 530 240

8 1/2-11 1/4 216-286 TA 150 430 195

8 1/2-11 1/4 216-286 TA AO 150 550 250

2 3/8-4 1/2 60-114 RGA 200 162 73

3 1/2-7 89-178 GA 350 555 252

3 1/2-7 89-178 GA AO 350 725 330

7- 7 5/8 178-194 GGA 350 695 316

7-7 5/8 178-194 GGA AO 350 998 454

4030204 SSD Drill Collar Elevator

4030205 SSD Casing Elevator

HANDING TOOLS


Varco Single Joint Center atch Casing Elevator (SJC type)

SJC are available in models to handle casing sizes from 6 5/8 to 20 1/2 inches OD. Varco's tough standards for metallurgical quality and rugged dependability in the field ensure a long, trouble-free services life. The built-in safety latch and dependable spring operation allows simple, safe operation of the latch mechanism in all conditions.

Model Casing Size OD Load Cap. ton

SJC4 2 3/8~5 3/4 4

SJC5 6~14 5

SJC6 16~36 6

HANDING TOOLS


SLIP TYPE ELEVATOR

SLIP TYPE ELEVATOR Varco BJ "Y" Series elevators are conventional slip type elevators for handling tubing and small casing. There are 7 types ranging from 20 to 200 ton capacity and covering pipe sizes from 1.05 to 7 5/8 inchese OD. They feature a four slip design which give an optimum contact on the pipe to prevent bttlenecking and gauge damage. The Varco BJ "YC" type elevator is capable of handling dual tubing strings. All type "Y" series elevator operate with the latch lock combination for safety. The "MYC" and "YC" provide a 7" and the "HYC" a 10 1/2" of intert contact to grip your casing or tubing.

YT Type elevator

HYC Elevator Slip Type elevator Y series selection Chart

Size Weight in mm

Type Capacity ton lb kg

1.050~ 2 1/16 27~73 LYT 20 57 26

1.315~2 7/8 33~73 MYT 40 148 67

1.315~3 1/2 33~89 YT 75 355 161

2 3/8~3 1/2 60~89 HYT 150 750 336

3 1/2~7 89~178 YC 75 445 206

3 1/2~7 89~178 MYC 125 750 336

2 7/8~7 5/8 89~194 HYC 200 997 452

2 7/8~7 5/8 89~194 HYC AO 200 1465 665

HANDING TOOLS


Slips and Inserts for Y series Elevator

Pipe Size inch Slips Insert No Qty

4030301 LYT Type 1.050 28745-7 29370 8

1.315 28745-2 28749 8

1.660 28745-3 28778 8

1.900 28745-4 28775 8

2.000 28745-5 28772 8

2 1/16 28745-6 28772 8

4030302 MYT Type

1.315 29343Y7 29259 8

1.660 29343Y6 29258 8

1.900 29343Y5 29257 8

2.000 29343Y4 29257 8

2 1/16 29343Y3 29256 8

2 3/8 29343Y2 29255 8

2 7/8 29343Y1 24773 8

4030303 YT Type

2 7/8 x 1.315 23108Y11 29259 12

2 7/8 x 1.660 23108Y10 29258 22

2 7/8 x 1.900 23108Y9 29257 12

2 7/8 x 2.000 23108Y8 29256 12

2 7/8 x 2 1/16 23108Y7 29256 12

2 7/8 x 2 3/8 23108Y6 29255 12

2 7/8 23108Y4 24773 12

3 3/4 x 2 7/8 23108Y3 30358 24

Pipe Size inch Slips Insert No Qty

4030304 HYT Type

2 7/8 x 2 3/8 39259Y4 29225 16

2 7/8 39259Y2 24773 16

3 3/4 x 2 7/8 39258Y4 30358 32

3 3/4 39258Y2 24774 32

4030305 YC Type

4 1/2 x 3 1/2 34931Y 24779 16

4 1/2 x 4 26830Y 24781 16

4 1/2 24072Y5 16408 16

5 1/2 x 5 24072Y7 24783 16

5 1/2 24072Y2 16407 16

7 x 6 5/8 24077Y7 24748 24

7 24077Y1 16407 24

4030306 HYC Type

2 7/8 201355Y 201356 24

4 1/2 x 3 1/2 55509Y 24779 24

4 1/2 x 4 55510Y 24781 24

4 1/2 55511Y 16408 24

5 1/2 x 5 55512Y 24783 36

5 1/2 55513Y BJ16407 36

7 x 6 5/8 55514Y 24748 48

7 55515Y 16401 48

7 5/8 70009Y 70010 48

HANDING TOOLS


CASING ELEVATOR/SPIDER

CASING ELEVATOR/SPIDER Slip action is controlled by a conveniently positioned pneumatic control valve or, in the case of the 200 ton tool, by simple manual operation. All pneumatically controlled units operate by utilizing the rig air supply. For maximum crew safety, the system may be manually operated if rig air pressure is temporarily lost. Further safety is insured by a positive locking mechanism which locks slips in the set position. The elevators utilize both a bottom guide and a bell guide to simplify stabbing. A top guide on spiders helps to centralize casing. Each tool is individually tested to assure consistency, durability and a high level of quality. Elevators/Spiders exceed API test requirements for hoisting tools. Each tool is proof-tested at 1 1/2 times rated load and then subjected to magnetic particle inspection to verify metallurgical quality. Elevator/Spider independent action allows each slip to move inward radially. Each slip then grips the casing at the original point of contact and the casing is centered as the slips are set. This is accomplished without putting stress on the casing or elevator/spider slip hinges. In addition, the backs of the slips maintain full contact with the double stepped bowl to provide complete slip back up.

HANDING TOOLS


4030401 350 Ton Capacity 4 1/2 to 14 inch casing Range

Casing

size

(inches)

Elevator

Bottom

Guide P/N

Spider Top

Guide P/N

Slips Set

P/N Insert Set P/N

Qty

Insert

s

4 1/2 11787 18419-1 11865 2168-16B-24 40

5 11788 18419-2 11864 2169-16B-24 40

5 1/2 11789 18419-3 11863 2170-40 40

6 5/8 11791 18419-4 11861 2632-24B-36 60

7 11791 18419-4 11860 2623-24B-36 60

7 5/8 11792 18419-5 11859 2633-60 60

7 3/4 11792 18419-5 71592-1 2649-60 60

8 5/8 11793 18419-6 11857 2640-32B-48 80

8 3/4 11793 18419-6 71591-3 2650-32B-48 80

9 5/8 11794 18419-7 11856 2633-80 80

9 3/4 71231 18419-15 71591-2 2649-80 80

9 7/8 71231 18419-15 71591-1 2649-80 80

10 3/4 11795 18419-10 11854 2640-40B-60 100

10 7/8 11795 18419-10 71590-1 2650-40B-60 100

11 3/4 11796 18419-10 11853 2637-100 100

11 7/8 11796 18419-10 71590-2 2651-100 100

13 3/8 11797 18419-10 70732-5 2636-40B-60 100

13 1/2 71228 18419-12 70732-4 2652-40B-60 100

13 5/8 71228 18419-12 70732-3 2653-40B-60 100

13 3/4 71228 18419-12 70732-2 2655-40B-60 100

14 15939 18419-11 70732-1 2635-100 100

4030402 500 Ton Capacity 16 to 24 inch Casing Range

Casing size

(inches)

Guide

P/N

Slip Set

P/N

Insert Set

P/N

Qty

Inserts

16 16184 15790-4 2635-180 180

18 5/8 15794 15790-3 13868-420 420

20 15793 15790-2 1635-180 180

24 15792 15790-1 1635-180 180

Weight Elevator /Spider

and accessories

Part

NO. lb kg

Elevator/Spider less

slips and guides 11776

390

0

176

9

Bell Guide Kit 11798 400 181

Spider Adapter Plate 19276 700 318

Link Set 84 inch 16966 808 366

Link Set 96 inch 16111 862 391

Link Set 108 inch 15386 916 415

Link Set 132 inch 16967 106

5 483

Weight Elevator /Spider

and accessories

Part

NO. lb kg

Elevator /Spider less

slips and Guides 15740 10,500

476

3

Bell guide kit 19001 600 272

Spider Adapter Plate 16552 2700 122

5

Link set 132 inch 16968 1705 773

Link set 144 inch 15833 1830 830

link set 160 inch 18057 2015 914

HANDING TOOLS


SUCKER ROD HOOK/ELEVATOR SUCKER ROD ELEVATOR SRE sucker rod elevators are suitable for each size sucker rod in well repairing.It can be adjusted by changing the spacer on the body. The elevators are designed and manufactured according to API Spec 8A-Specification for Drilling and Production Hoisting Equipment

Sucker Rod Elevator order information

Elevator Sucker Rod

Size (in)

Elevator Bore

ID (mm)

Load Capacity

(tons)

Weight

(kg) P/N

SRE19 1/2 19 4030501

SRE23 5/8~3/4 23 4030502

SRE26 3/4~7/8 26 4030503

SRE30 1 30 4030504

SRE32 1 1/8 21

20 TONS 12

4030505

SUCKER ROD HOOK The Rod Hook is designed with a load rating of 25 tons. The special designed snap-in latch mechanism lets rod elevator bail hook in without operator releasing latch and bail is held secure in place until released.

Trico Style Heavy-Lift Short Snap-In Rod Hook

Part Number DescriptioJ-RH25-35 Hook - complete

J-554-543-400 BearingJ-554-542-500 Grease capJ-554-544-800 Housing - springJ-554-544-400 LatchJ-554-544-200 LeverJ-554-542-901 NutJ-554-543-105 Pin - latchJ-554-543-100 Pin - LeverJ-554-542-700 Plug - BailJ-554-542-600 Screw - Grease capJ-554-544-700 SpringJ-554-579-000 Repair kit

HANDING TOOLS


Roller Assemblies

Siz KRVS KRBM HDP/HDS3” Hex J-1450 J-5210 J-3667

3-1/2” Hex J-1451 J-5211 J-36684-1/4” Hex J-1452 J-2948 J-36695-1/4” Hex J-3672

6” Hex J-36732-1/2” Sq J-1445 J-2949

3” J-1446 J-2943 J-36603-1/2” Sq J-1447 J-2944 J-36614-1/4” Sq J-1448 J-2945 J-36625-1/4” Sq J-3665

6” J-3666

KELLY BUSHING

ROLLER KELLY BUSHING The Square and Pin Drive Bushings are designed for shallow, medium depth and deep well drilling. The bushing will accommodate 3" – 6" hex and square Kellys. Standard fiber sleeve bearings are offered with optional roller bearings upon request.

Kelly Bushings

Kelly Size/Type KRVS KRBM 27 HDP 27 HDS3” Hex J-1402-30 J-5208-30 J-3650-30 J-3635-30

3-1/2” Hex J-1402-35 J-5208-35 J-3650-35 J-3635-35

4-1/4” Hex J-1402-42 J-5208-42 J-3650-42 J-3635-42

5-1/4” Hex J-3650-52 J-3635-52

6” Hex J-3650-60 J-3635-60

2-1/2” Sq J-1401-25 J-5209-25

3” Sq J-1401-30 J-5209-30 J-3651-30 J-3636-30

3-1/2” Sq J-1401-35 J-5209-35 J-3651-35 J-3636-35

4-1/4” Sq J-1401-42 J-5209-42 J-3651-42 J-3636-42

5-1/4” Sq J-1401-52 J-3651-52 J-3636-52

6” Sq J-3651-60 J-3636-60

HANDING TOOLS


MAST BUSHING

the SQ drive Kelly bushings. Short and medium style slips are used in the SQ drive for shallower depth and drilling.

Master Bushings

Make Size MPCH MSPC MSP/MDSP MSS M

17-1/2” J-1006-1 J

20 1/2” J 1805 1 J 1007 1 J

API

27 1/2” J 1808 1 J 5429 1 J 1010 1

RSH-18 J-70526-4 J-1006-8 J

RSB 18 J

RSH 22 J 1008 3 J

Brewster

RSH 27 1/2” J 1808 8 J 5429 2 J

17-1/2” J-1006-1 J

20 1/2” J 1805 1 J 70539 4 J 1007 1 J

27 1/2” J 1808 1 J 5429 1 J

Emsco

37 1/2” J 6601 2

17-1/2” J-1006-5 J

20 1/2” J 70539 1 J 1007 1 J

23” J 1806 1 J 70539 9 J 1008 1 J

27 1/2” J 1808 7 J 5429 7 J 1010 7 J

Ideco

37 1/2” J 6601 4

17-1/2” J-1006-1 J

20 1/2” J 1805 1 J 70539 4 J

A20 1/2” J

27 1/2” J 1808 1 J 5429 1 J

Oilwell

37 1/2” J 6601 3

17-1/2” J-1006-1 J

20 1/2” J 1805 1 J 70539 4 J 1007 1 J

27 1/2” J 1808 5 J 5429 5 J 1010 5 J

National

37 1/2” J 6601 1

17-1/2” J

20 1/2”

22 1/2” J

27 1/2” J 1808 1 J

Gardner

Denver

37 1/2” J 6601 7

MAST BUSHING Master Bushings are designed for SQ and Pin drive Kelly bushings from sizes 17-1/2" to 37-1/2" rotary tables. The pin drive allows the use of ex- tended insert bowls to meet flush with the top of table which means better slip support and preventing damage to drill pipe. The SQ drive bushing has a 4" deep recess to used with

HANDING TOOLS


CASING BUSHING CASING BUSHING The Casing Bushings are designed to fit into the rotary table for perfect alignment with the well bore. All bushings are designed to be fitted with insert bowls to accommodate all pipe and casing sizes. It is used with the CMSXL slips and all API 4 tapered slips. Casing Bushing

Manufacturer Rotary Table Size Casing Casing Bushing/Insert Bowl11-3/4” - 13-3/8” J-31

All

17-1/2” - 20-1/2”

9-5/8 & J-1918-5/8 & J-312-3/8 - J-1811-3/4 & J-31

All

26 &

27-1/2 1 J-312 J-66

9-5/8 & J-6111-3/4 & J-61

All (27-1/2

API)

27-1/2

1 J-612 J-101

9-5/8 & J-6111-3/4 & J-61

1 J-612 J-1121 J-114

18-5/8 & J-1692 J-164

NATIONAL

37-1/2 -

49-1/2

3 J-1172 J-101

9-5/8 & J-6111-3/4 & J-61

1 J-612 J-611 J-114

18-5/8 & J-169

OILWELL / WIRTH

37-1/2 -

49-1/2

3 J-1202 J-115

9-5/8 & J-6111-3/4 & J-61

1 J-612 J-1651 J-114

18-5/8 & J-169

EMSCO

37-1/2 -

49-1/2

3 J-1162 J-101

9-5/8 & J-6111-3/4 & J-61

1 J-61

IDECO

37-1/2

3 J-120

HANDING TOOLS


Casing Bushing Master Bushing Insert Bowls & Accessories The MK Style Insert Bowls are designed to work with the MPCH and Solid master bushings to accommodate sizes up to 13-3/8”. We also provide 2 and 4 leg lifting slings and a bit breaker adapter plate.

Master Bushing Insert Bowls & Accessories

Part Number DescriptiJ-181 API # 3 Insert Bowl 8-5/8” and SmallerJ-190 API # 2 Insert Bowl 9-5/8” - 10-3/4”J-190 API # 1 Insert Bowl 11-3/4” - 13-3/8”J-660 API # 3 Insert Bowl w/ Ears 8-5/8” and SmallerJ-660 API # 2 Insert Bowl w/ Ears 9-5/8” - 10-3/4”J-661 API # 1 Insert Bowl w/ Ears 11-3/4” - 13-3/8”J-102 Lifting Sling ( 2 Leg )J-669 Lifting Sling ( 4 Leg )

J-181 Bit Breaker Adapter Plate

200 Ton Hinged Casing Spider and Bowls

Part Number Descriptio

J-7704-A-79 200 Ton Hinged Casing Spider 13-3/8"

J-7704-1008 13-3/8" x 10 3/4" Insert Bowl for Spider 3" Taper

J-7704-1009 8-5/8" and Smaller Insert Bowl for Spider 4" Taper

API Bowls 100 Ton

Part Number Descriptio

J-17-850 8-5/8" 100 Ton API Bowl

J-17-850-10 10 3/4" 100 Ton API Bowl

HANDING TOOLS


MANUAL TONG

MANUAL TONG Manual Tongs are constructed from the finest alloy steel, all machined surfaces are held to a close tolerance. All parts are heat treated for maximum strength, a magnetic particle inspection is performed to detect cracks in the metal. All tongs are tested for performance before shipping. All tong dies are made from carburized alloy steel, they are heat treated for extreme hardness and strength. Tong sizes are available to cover drill pipe and casing sizes from 1.900" OD through 30" OD. Torque rating will vary with the size of lug jaw used.

Manual tong BJ Eqivalent Torques (lb-ft) Lever Tubular Size (in)

4050101 SDD 100,000 STD 4~17

4050102 DB 65,000 STD 3 1/2~17

4050103L B 55,000 Long 3 1/2~13 3/8

4050103S B 42,000 Short 3 1/2~13 3/8

4050104L C 35,000 Long 2 3/8~10 3/4

4050104S C 35,000 Short 2 3/8~10 3/4

4050105 LF 16,000 STD 2 3/8~10 5/8

HANDING TOOLS


THE BLUE DIAMOND DIE The blue diamond die offers superior performance by providing better utilization of its unique griping surface. The tech are crowned at the middle of the die, rather than being the same height along its full length. This crowned profile reduces end loading and assures a quick, positive (but gentle) grip under all torque loads. The results are greater efficiency and longer wear, with less marking and scarring of pipe. As a bonus feature, all dies are heat-treated with a special BJ process that assures uniform tooth hardness long life. Look for the unique diamond tooth pattern and distinctive blue finish. "RED TOP" tong dies: For those who prefer a standard-type die, BJ offers Red Top dies in a full range of types and sizes for use in manual drill pipe and casing tongs. Red Top dies are manufactured in three tired and proven tooth styles, as shown on this page: Pyramid, Plain and Coarse.

Size Weigh per doz Tongs Die Type P/N

in mm lb kg

BJ Tongs Blue diamond 16402-6 1/2 x 1 1/4 x 5 7/8 12.7 x 31.75 x 149.22 9 4.08

BJ DB made in 1965 and later Pyramid 16402-2 1/2 x 1 1/4 x 5 7/8 12.7 x 31.75 x 149.22 9 4.08

BJ SDD, C, F and LF Blue Diamond 16401-6 1/2 x 1 1/4 x 5 12.7 x 31.75 x 127 6.75 3.06

Short dies for BJ Type B tong with

1 1/4" slot Pyramid 24768 1/2 x 1 1/4 x 3 7/8 12.7 x 31.75 x 98.42 6 2.72

HANDING TOOLS


HYDRAULIC DRILL PIPE TONG

HYDRAULIC DRILL PIPE TONG Based on Varco Big Foot,The Iron Roughneck working principal, our Power Drilling Tong is a safer, more efficient system for tripping pipe. A combination of the proven Hydraulic spinning wrench and the hydraulic torque wrench, it provides fast, accurate stabbing and quick, controlled spin up. Pipe can be torqued to precise, consistent values without creating bending stresses in the drilling string. That alone can save you a lot of tool joints and drill pipe. Comparing to Varco Big Foot,The Iron Roughneck, our power tong is more compact, more easier to instal and operate and more less maintenance job required but with all perfect features of Big Foot being applied. By using such Power tong, Rig floow hazards casued by the spinning chain, the tongs and tongs lines are eliminated. The power tong is hydraulically powered, so speed control is smooth and variable. You can adjust for fast spin up of drill pipe or slow, controlled spin up for "walking-in" drill collars. This minimizes cross-threading, "thread burn" and permit proper spin up of the engaged threads- all crtitical factors in the longevity of expensive tool joints.A fully reversible feature permits pipe to be spun out intead of rotating out with the table, avoiding possible damage to the wall cake and eliminating hazardous floor conditions. To adjust the height of tong, one Hydraulic Hanger is designed

HANDING TOOLS


Power tong ZQ203-125-I ZQ203-100-I ZQ203-100-II TQ178-16 TQ340-20Y TQ340-35

in 5~8 5~8 5~8 5~8 2 3/8~5 2 3/8-5 Size Rang

mm 127-203 127-203 127-203 127-203 85-162 65-127

lb-ft 92,200 73,750 73,750 73,750 36,880 18,440 Max.

Torque kN.M 125 100 100 100 50 25

Hi-Gear 40 40 40 40 60 65 Rotating

Speed

(RPM) Lo-Gear 2.7 2.7 2.7 2.7 4.1 10.5

psi 2,900 2,400 2,400 2,400 2,320 1,740 Hydraulic

system

working

pressure

rated

Mpa 20 16.6 16.6 16.6 16 12

LPM 114 114 114 114 120 180 Hydraulic

system flow

rate GPM 30 30 30 30 32 48

mm 1,500 1,500 1,500 - 1,000 1,000 Stroke of

shifting

cylinder in 59 59 59 - 39.4 39.4

mm - - - 0-1,500 Moving

distance of

tong in - 0-59

mm 0-485 0-800 Up-down

distance of

tong in 0-19 0-31.5

kg 2,600 2,400 2,500 3,250 1,500 620 Weight

lb 5,730 5,290 5,510 7,165 3,310 1,360

mm 1720*1050*1750 1700*1000*1400 1700*1000*1400 1750*1650*2050 1570*800*1190 1110*790*820Overall

Dimensions in 68*41*69 67*39*55 67*39*55 69*65*81 62*31*47 44*31*42

HANDING TOOLS


HYDRAULIC CASING TONG

HYDRAULIC CASING TONG Our power casing tong is machined by feautures-combining of Eckel, weatherfold, and Farr designs as below Spec.

Casing Tong TQ178-16 TQ340-20Y TQ340-35 TQ178-16Y TQ340-35Y

4~7 4~13 3/8 5 1/2~13 3/8 4~7 4~13 3/8 4~13 3/8 Size Rang

101.6~178 101.6~340 139.7~340 101.6~178 101.6~340 101.6~340

18 16 18 18 18 18 Hydraulic system

working pressure 2,610 2,320 2,610 2,610 2,610 2,610

114 114 114 114 114 114 Hydraulic system

flow rate 30.1 30.1 30.1 30.1 30.1 30.1

lb.ft 1,770~2,200 2,730 1,844~2,200 1,770~2,200 2,950~3,680 lb.ft

KN.m KN.m 2.4~3 3.7 2.5~3 2.4~3 4.0~5.0

lb.ft - - 4,420~5,530 - - lb.ft

KN.M KN.M - - 6.0~7.5 - -

lb.ft 11,800 14,750 25,800 11,060~13,280 19,900~22,120

Max.

Torque

lb.ft

KN.M KN.M 16 20 35 15~18 27~30

RPM RPM 54~79 50~80 60~86 54~79 80~98

RPM RPM 21~30 Rotating

Speed RPM RPM 9~13.1 6~14 2.6~5.3 8.5~12 12~16

mm 1540*760*740 1520*850*670 1540*900*860 1520*850*670 1540*900*860 Overall

Dimensions in 61*30*29 60*34*26 61*36*34 60*34*26 61*36*34

lb 1280 1234 1720 1234 1720 Weight

Kg 580 560 780 560 780

HANDING TOOLS


HYDRAULIC TUBING TONG

HYDRAULIC TUBING TONG By introducing Eckel design, we developed our own Hydraulic Tubing tong with the following spec.

Tongs XYQ1.8 XYQ3C XYQ6B XYQ12A

Pipe Range for Master tong 1 7/8~2 3/8 2 3/8~3 1/2 2 7/8~4 1/2 2 7/8~5 9/16

Pipe range for Back-Up Tong - 2 7/8~4 1/2 3 1/2~5 9/16 3 1/2~6 1/8

Hi-Gear rated Torque (lb-ft) 519 812 1,107 1,919

Lo-Gear rated Torque (lb-ft) 1,336 - - 8,856

Hi-Gear Max. Rotating Speed (RPM) 100 100 85 68

Lo-Gear Max. Rotating Speed (RPM) 40 30 20 13

Opening size of Master tong 2 3/8 3 3/4 4 5/8 5 7/8

Opening Size of Back-up tong - 4 9/16 5 11/16 6 1/4

Rated working pressure (psi) 1,430 1,430 1,573 1,573

Max. Oil Supply (GPM) 17.60 17.60 22.00 26.40

Overall Dimensions (mm) 543*334*404 733*420*550 850*480*600 1042*582*839

Gross Weight (kg) 87 160 240 485

HANDING TOOLS


POWER STATION

POWER STATION Hydraulic Drill pipe tong, Hydraulic Casing tong and Hydraulic Tubing tong could get power from the same power station. There are 2 different designs which will be used for each different cases. Furthermore, the explosion-proof motor can be alternated by Diesel Engine as per the working conditions. Both 50 HZ and 60 HZ explosion-proof motor are available. Power Station YZB-120 FYZB-120

20 20 20 Max. Working Pressure

2,900 2,900 2,900

120 120 120 Flow rate

31.7 31.7 31.7

587 587 587 Oil volume

155 155 155

1.1 1.1 Motor for Air-cooled system

1.5 1.5

37 37 37 Explosion-proof motor

50 50 50

1720*1050*1155 1530*745*955 1530*745*955 Overall Dimensions

68*41*46 60*29*38 60*29*38

1,300 1,500 1,500 Weight

2,866 3,307 3,307

FYZ-120B Air Cooled Power Unit is

used when the working enviroment

temperature above 45 degrees.

YZB-120 Power Unit is used when the

working enviroment temperature below

45 degree

Documents

handing tools - cpmc-cn. · PDF fileHANDING TOOLS ... Handle pin iwth washer and cotter pin 3769 0.5 0.2 ... Rough neck proven by field test and roughneck proof by design and