Http:// World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日

http://www.eunil.com

World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd.

Everyday is a good day

(株 )誾日




(株 )誾日

PCB Router / Depanel machine is used to separate the arrayed printed circuit board (PCB) / printed wiring board (PWB) from the main panel PCB. This equipment is automatically supplied PCB from the downstream machine or manually loaded PCB by the operator. This machine is using the high revolution milling spindle to separate PCB. It would be connected with the automatic PCB unloading system as an option.It could be applied to Screw Application machine.




(株 )誾日

PCB Router / Depanel machine : Off-Line ETR-200This machine is used to separate the main panel PCB and the arrayed PCB as off-line.The operator manually load PCB to the machine. Then, the machine will separate the PCB by the program. When it finishes the job, the PCB will be unloaded by the operator.The movement is controlled by the robot, 2 X-Axis, 1 Y-Axis, 1 Z-Axis.It has a single spindle head and it will also have dual spindle head as an option.It has two shuttle, working bay, which has the safety feature.The shuttle has PCB holding fixture for every different model of PCB. It will suck out the dust or the milling particles to the dust collector.It has the bit optimization and the bit break detection as an option.




(株 )誾日

PCB Router / Depanel machine : Off-Line ETR-200FeaturesMovement : X, Y, Z AxisWorking Bay : ShuttleProgramming : PLC and Robot teachingMonitor and Operating : 5” Touch screenBit : Quick changeSafety : Door and Barrier Optimal sensor

OptionBit optimization : Count No. of worked PCBBit break detectionDual head spindle




(株 )誾日

PCB Router / Depanel machine : Off-Line ETR-200Specification

Machine size (mm)

1,200 X 1,250 X 1,600

PCB size (mm) 330 X 250 ~ 50 X 50

No. of Head Single (Dual as option)

Robot

X-Axis 600mm stroke

Y-Axis 600mm stroke

Z-Axis 100mm stroke

Repeatability

±0.02mm

Speed Max. 1,000mm/sec

Spindle Max. 60,000rpm milling spindle

Power supply 220V[±5%], 50~60Hz, 1Phase

Power consumption

5,000 Watt

Air supply 5 bar

Programming PLC & Robot teaching




(株 )誾日

PCB Router / Depanel machine : Off-Line ETR-200Head & Spindle Specification

No. of Head Single (Dual as option)

Spindle

Speed Max. 60,000 rpm

Power 150W, 30V, Max. 1,000Hz

Type Milling

Maker KAVO

Bit Type Chipbreaker, Downdraft

Life time 90 M

RecommendCut condition

38,000 rpm83mm/sec movement( It would be different due to PCB condition )

Size Ø1.6mm




(株 )誾日

PCB Router / Depanel machine : Off-Line ETR-200

Robot Specification

Robot

X-Axis 600mm stroke

Y-Axis 600mm stroke

Z-Axis 100mm stroke

Speed Max. 1,000mm/sec

Shuttle

No. of shuttle

2 shuttles

Fixture 1 PCB holding

Safety Optimal sensor

Safety : Barrier Optimal Sensor

Shuttle : 1 PCB holding fixture ( Photo as option)

X-AxisZ-Axis

Y-Axis




(株 )誾日

PCB Router / Depanel machine : Off-Line ETR-200

Dust collector Specification

Size (mm) 450 X 520 X 900

Blower

Volume 25 m³/min

Pressure 230 mmAq

Motor 1.5 kw

Filter Material Polyester

Cleaning Manual




(株 )誾日

PCB Router / Depanel machine : Off-Line ETR-200Routing PCBs Feature

Best condition for using PCB Router / Depanel machineRecommended

High rate of bit break

Short bit life timeCreate lots of dust / routing particles

Documents

Http:// World Wide Leader PCB HANDLING EQUIPMENT EUNIL Co., Ltd. Everyday is a good day ( 株 ) 誾日