Upload
phamquynh
View
237
Download
10
Embed Size (px)
Citation preview
introduction
ISO9001 / CE Certified 70 years of improving self-image and orthodontic health www.rmortho.com
RMORMO is much more than a business andmodel of excellence among Colorado corpo-rations. The company is the oldest privatelyheld orthodontic firm in the United States, andis a Denver institution whose company historyis inextricably linked with the history of Denverand orthodontics itself.
Institution and DeterminationBefore the advent of chrome alloy (stainlesssteel) and prior to the founding of RMO, ortho-dontists had to be skilled craftsmen as well asdoctors. In fact, much of their time was spentdevising, constructing, and maintaining theirown oral appliances. Because those appli-ances were typically fabricated from goldalloy, which tended to loosen in a short periodof time, a large part of an orthodontist’s workwas dedicated to repairing and adjusting theappliances after they had been put into use.
The orthodontist’s job demanded mechanicalskill, diligence, and even artistry. And yet, forall of the effort involved, the occupation wasoften less than rewarding. Even the bestorthodontic appliances of the day were woe-fully limited in their effectiveness.
All that changed with the development of ver-satile stainless steel alloys, coupled with theingenuity and foresight of RMO’s founder, Dr.Archie Brusse, a pioneer Denver orthodontist.With a small but capable staff, and with helpfrom an executive at the American Steel andWire Company, RMO set about developing thefirst set of prefabricated orthodontic applianceoptions. After much clinical research andexperimentation, the first system of optionswas unveiled in 1933 at the annual meeting ofthe American Association of Orthodontists.Reception was negative. Most recognizedleaders of that day said it wouldn’t work.
The Rocky Mountain Orthodontics (RMO) effortbegan around 1930. Since then, the companyhas made dramatic advances in the scienceof orthodontics, establishing itself as one of theleaders of a rapidly evolving field – a field thatdown through the decades has made people’slives better. Since its formal incorporation in1935 as Rocky Mountain Metal Products, RMOhas been known as a company of energy andideas – traits that remain at the core of thecompany’s philosophy today.
1930’s ads that ran in the (Mosby) InernationalJournal of Othodontia and Dentristry for Children.
In time, the impact of these prefabricated devices on theworld of orthodontics was dramatic. Simply put, theychanged the face of dentistry. The wide variety of appli-ance shapes and sizes supplied by RMO enabled ortho-dontists to treat a diverse array of patients more effectively.
"What was developed was a way of putting things togetherthat provided more effective and creative options for doc-tors," says Martin Brusse, RMO Chairman and ChiefExecutive Officer, and son of the company’s founder. "Theorthodontist could employ a greater variety of differenttechniques through more individualized diagnosis andtreatment. Patients would benefit."
These developments coincided with a period of significantprogress in the science of bone biology and tooth move-ment, which was particularly beneficial to both RMO andthe field of orthodontics overall. New studies were reveal-ing the long-term ineffectiveness of oral appliances thatexceeded certain thresholds of pressure in moving teeth and resetting bites.Thus, a new mantra in orthodontics – "delicacy andstrength" – was born. These two qualities perfectly charac-terized light, clean, versatile RMO appliance options.
Not only did Archie Brusse and his small staff turn a fledg-ling depression-time start-up business into a multimillion-dollar industry bellwether, but they also helped attract den-tists to the practice of orthodontics by vastly improving thequality and diversity of tools available to them. By exten-sion, RMO has made invaluable contributions that haveimproved the oral health and self-image of countless satis-fied patients.
Setting the StandardToday, RMO maintains its role as an innovator and vision-ary, pushing the practice of orthodontics to new frontierswhile continuing to provide a benchmark of quality forother companies to follow. RMO’s catalogue now showshow 7,000 different basic products and services can betranslated into a universe of treatment options for orthodon-tists all over the world.
Increasingly, RMO has emphasized the development ofcomputer-aided diagnostic and treatment planning tools.
These information innovations have provided powerful ana-lytic information that has helped doctors and their staffsdeal with each patient’s individual growth and develop-ment. This results in fewer surprises and fewer after-ortho-dontics failures.
RMO’s health care innovations have not gone unnoticed.RMO was awarded the prestigious E Award for excellencein educational marketing by two U.S. presidents, and thecompany has received the Colorado Governor’s Award forconsistent excellence in exporting.
These honors reflect RMO’s status as a truly international company, with more than half of its revenue coming fromoutside the United States. RMO today maintains sub-sidiaries based in Strasbourg and Sydney, along with a 30-year-old joint venture relationship with the J. MoritaCompany in Japan. Sixty independent dental dealers inother countries round out a very impressive RMO globalmarketing effort.
Denver can be proud of the loyalty and efforts of theemployees and the local commercial suppliers who havehelped RMO succeed and advance during the company’shistory. RMO is, by all measures, an international standardbearer poised to build upon its legacy of excellence fordecades to come.
Our recent ads that ran in the American Journalof Orthodontics & Dentofacial Orthopedics
Martin Brusse, CEODr. Archie Brusse
direction for the future
www.rmortho.com
It seems that there are roughly nine types oforthodontic treatment:…(1) pediatric pre-vention…(2) pediatric interception 1stphase…(3) comprehensive late mixed den-tition treatment…(4) comprehensiveteenage and adult orthodontics…(5) adultminor tooth movement orthodontics…(6)reconstructive dentistry orthodontics…(7)TMJ orthodontics…(8) surgical orthodon-tics…(9) breathing/sleep problem relatedorthodontics.
RMO serves, with various degrees of intensi-ty, all aspects of orthodontics. We havebeen active in early treatment since 1957when we first began to work with Dr. Ricketts’Bioprogressive® vision. During the past 10years we have invested considerably in 1stphase approaches. When possible, themajority of people favor early interceptionover more complex measures in later years.
RMO realizes that all patients differ and thatall orthodontic dentists vary in education,experience, treatment approach, appli-ance performance, and final finishingresults. Since it is not possible to satisfy allneeds of every doctor, RMO is committedto developing practical Synergistic options.
“Synergy develops when two or more inter-active parts of a system produce an effectof which the parts are incapable of produc-ing." Said another way, "The Power of theinteractions of the whole become fargreater than the sum of the parts.”
RMO’s attention to synergies provides prac-tices with a wide selection of dependabletreatment options.
Evidence-Based TreatmentThe formal "Evidence-Based Treatment" con-cept began in the UK about 1990. It proba-bly surfaced because the UK health caresystem needed formal protocols to encour-age medical and dental people to continu-ally upgrade their practices in accordancewith the best available scientific advance-ments in treatment medicines and proce-dures. The "Evidence-Based" disciplinehelps patients, doctors and health business-es. We are involved with our own support-ing ISO-related program.
As we see it, there are four levels of evi-dence inquiry and documentation. Eachinvites suggestions for possible continuousimprovement. RMO”s evidence basedprocesses dramatically affects our productdevelopment and product/ service instructions.
Level 1: Ideas/concepts/assumptions/theories. Convergences…conflicts…otherimplications.
“Never Believe that a few caring peoplecan’t change the world. Indeed, that’s allwho ever have.” Margaret Mead
Level 2: Anecdotal evidence that seems to meet expectations for benefiting patients, companies, doctors, and staff.
Level 3: Participative user groups and cus-tomer recorded documentation.
Level 4: University verification studies.
These evidence-based disciplines helpassure customer satisfaction.
"The Power ofthe interactions
of the wholebecome fargreater than
the sum of theparts.”
diagnostics 1
first phaseKussick Bone Remodeling 8Lingual Arch Developer 11Wilson Fixed/Removable 13Face Mask 26Space Maintainer 27
intraoral/extraoralElastics 30Elastomeric Products 31Ortho-Gel / Alginate / Impression Trays 34Facebows / Headgears 35Drive Tube 38MyTGuard Mouthguard 39
bands 42
fixed appliancesLUXI II Ceramic / Gold Insert 67Signature III Ceramic 73Synergy 81VersaT 105Mini-Taurus 109Integra 129Grace 131Machine Milled 135Light Wire 142Miura Plastic 143Buccal Tubes 146Lingual Tubes 152
adhesives 158
wireElgiloy Preforms 167Elgiloy Straight Lengths 175Nickel-Titanium Preforms 176Bendaloy 180Tru-Chrome Stainless Steel 181RM Lock 189Bondable Lingual Retainer 189Expansion Screws 190Retainer Boxes 191
instrumentsRMO Schweickhardt 196Ascent 212
equipmentWelder 224
tableofcontents
1
89
67
2
3
45
diagnostics
www.rmortho.com
dia
gno
stic
s RMO® DIAGNOSTIC SERVICES AND PRODUCTS diagnostics
2
Computerized Diagnostic Services
RMO® Diagnostic Services is the world leaderin providing Computerized OrthodonticDiagnosis. We have analyzed and diagnosedover 600,000 cases. This service has helpedmany clinicians to determine the best treat-ment plan possible, based on the complexitiesof each individual patient.
The Key Components of the service are:• Comprehensive Cephalometric Analysis
Lateral
Frontal
• Individualized Norms based on age, gender and race
• Tracing of Lateral and Frontal X-Rays
• Arch Analysis Upper and Lower Dentition
• Visual Treatment Objective (short and long term)
• Long Range Growth Simulation to maturity with and without treatment.
• Treatment Sequences Worksheet
• Alerts including TMJ awareness, excessive mandibular growth and endochronological alert.
• Thirty-three different letters are generated for extreme or unusual situations.
www.rmortho.com
diagnosticsE-CEPH™ AND MAIL-IN SERVICE
dia
gno
stics
3
Two easy ways to access this service
Both options below provide you with the best information available to deter-mine the most effective treatment plans. RMO®’s E-Cephalometrics™ (com-puter-aided orthodontic diagnostics service via the internet) is the most costeffective, complete and accurate orthodontic diagnostic service in the world.
E-Cephalometrics™...Here is how it works in comparison to our regular mail-in service • Internet used to transmit patient records and diagnosis.
• Doctor transmits digital/scanned records via Internet.
• RMODS processes the records according to the Doctor’s .individualized treatment standards.
• RMODS transmits the diagnostic work-up back to the Doctor via the internet.
• Records are shared with other dental/health professionals electronically.
• Records are stored electronically.
• Records are viewed on screen for patient/parent consultation.
• Records are shared with the insurance companies electronically.
• Faster reimbursement.
• E-Ceph™ is like having an in-office diagnostic system with the best trained staff, without the overhead.
• RMODS has over 200 years of combined staff experience working for you.
• Surgical treatment design is available.
• Always free telephone and online help.
Send-In and Send-Back Service• Transmit and receive patient records by mail.
• The Doctor sends the records by mail.
• RMODS processes the records according to the Doctor’s individualized treatment standards.
• RMODS sends a diagnostic work-up by return mail.
• Records are shared with other dental/health professionals by mail.
• Records are mailed to insurance companies.
• RMODS has over 200 years of combined staff experience working for you.
• Surgical treatment design is available.
• Always free telephone customer support.
www.rmortho.com
dia
gno
stic
s
diagnostics
4
TREATMENT PLANS
Comprehensive Cephalometric Description• This report is generated for lateral and frontal x-rays.
• Over 100 measured factors are evaluated and printed with norms and clinical deviation, based onpatient’s age, sex and race.
• Orthodontic-dental-skeletal relationship is reported including soft tissue and airway analysis.
Tracing Sheet• Lateral and Frontal tracing
• The most popular analysis (Ricketts, Jarabak, Steiner,Sassouni and many others).
• Special consideration, which is a summary of the patient problem based on the over 200 digitized anatomical points.
Visual Norms• Visual norm is an individualized computer drawing of a composite of a normal
population selected by age, gender and race, adjusted for size.
• It enables the clinician to visualize the patient’s abnormalities by superimposition on the tracing.
www.rmortho.com
diagnosticsTREATMENT PLANS
dia
gno
stics
5
Growth Forecast to Maturity• Growth forecast to maturity with and without treatment
are displayed.
• Expected profile, skeletal development and dentition are evaluated.
• Third molar space analysis, expected space available.
• Patient height to maturity is estimated.
• This display is the most effective communicator for patient presentation, it answers the questions:
- What happens if I am not treated?
- What if I am treated?
- Will I outgrow the problem?
• It emphasizes the long term treatment plan instead of the two years (short term plan).
Visual Treatment Objective (VTO)• It is an individualized post-treatment goal.
• It takes into account the existing skeletal morphology, limitation of skeletal change, expected growth, occlusal function, esthetics, arch form and crowding, the doctor’s treatment philosophy and mechanics, extraction or none, and treatment stability.
Treatment Design• It shows the tooth and skeletal changes required to
achieve the visual treatment objective.
Sequence Worksheet• This is a tool to aid the clinician in developing a written
treatment plan.
• This tool combined with a small amount of time spent on documentation, allows the clinician to track how treatment is progressing at any time.
Please go to www.rmortho.com for additional information and to start using E-Ceph™.
6
firstphase
www.rmortho.com
first
pha
se
firstphase
8
KUSSICK™ BONE REMODELING ORTHODONTICS
Order Package Number Contains
Kussick™ Orthopedic Incline®
The Kussick™ Orthopedic Incline® is for the early correction of deep bites and deep biteswith overjets. It achieves any or all of the following:
• It relocates the mandible forward in retrognathic cases.
• It retracts the maxillary and bimaxillary protrusions as the mandible is relocated forward.
• It brings about the formation of the labial anterior mandibular alveolar bone as it increases arch length.
• The opening of the bite enables the buccal alveolar bone and the bicuspids of the mandible to rise and the maxillary arch to drop down. Thereby, the Curve of Spee is leveled and the vertical dimension is corrected.
Kussick™ Orthopedic Incline® J00710
The Kussick™ Orthopedic Incline® package contents are:
• Kussick™ Orthopedic Incline® 1
• Light Cure Rope Material 1
• Appliance Case 1
• Instructions Patient/Clinician 1
Kussick™ Orthopedic Incline® 5-Pak J007105
The Kussick™ Orthopedic Incline® 5-Pak package contents are:
• Kussick™ Orthopedic Incline® 5
• Instructions – Patient 5
• Instructions – Clinician 1
Kussick™ Tongue RetrainerThe Tongue Retrainer efficiently corrects and controls tongue thrusting, thumb sucking andlip habits. It functionally closes anterior open bites and reduces accompaning overjets.The Tongue Retrainer applies to all of the following treatment considerations:
• It retrains the tongue to stay in it’s biological position during swallowing.
• It allows the upper anteior teeth and alveolar bone to be located downward and forward.
Kussick™ Tongue Retrainer J00730
The Kussick™Tongue Retrainer package contents are:
• Kussick™Tongue Retrainer 1
• Light Cure Rope Material 1
• Appliance Case 1
• Instructions 1
Kussick™ Tongue Retrainer 5-Pak J007305
The Kussick™ Tongue Retrainer 5-Pak package contents are:
• Kussick™ Tongue Retrainer 5
• Instructions – Patient 5
• Instructions – Clinician 1
www.rmortho.com
firstpha
se
9
KUSSICK™ BONE REMODELING ORTHODONTICSfirstphase
Order Package Number Contains
Kussick™ Introductory KitThe Kussick Introductory Kit package contents are:
• Kussick™ Orthopedic Incline® J00710 2 pkg
• Kussick™ Tongue Retrainer J00730 2 pkg
• Video Instructions – 1 each of Kussick™ Orthopedic Incline®;Kussick™ Tongue Retrainer, and Overview Video of Kussick™ BoneRemodeling Orthodontics
Kussick™ Introductory Kit K00753 (VHS) 1K00754 (PAL) 1
Kussick™ Maxillary Developing Arch (0.020 light arch wire)The main purpose of the Kussick™ Maxillary Developing Arch is to build and developneeded maxillary overjet and arch length in early (5-10 years) Class I, Class III, Class II Div2 and some Class II Div 1 cases. Corrects maxillary anterior crowding by increasing over-jets, arch expansion and length of maxillary alveolus. Can be used with deciduous den-tition (4-6 years). Slow activation (no more than 1 mm per month) of this applianceresults in the building of new alveolar bone in front of the existing maxillary teeth withoutroot resorption, blunting, or gingival recession plus normal apical development.
Kussick™ Maxillary Developing Arch
Size Order mm Package Number Contains
1 E00580 70 5
2 E00581 85 5
3 E00582 90 5
4 E00583 100 5
(measurement from mesial end of molar tube)
www.rmortho.com
first
pha
se
firstphase
10
KUSSICK™ BONE REMODELING ORTHODONTICS
Order Package Number Contains
Kussick™ Rapidly Adjusted Headgear SystemThe Kussick™ Rapidly Adjusted Headgear System consists of the Kussick™ Head Gear andthe Kussick™ Facebows. It carries the anterior alveolus posteriorly as a unit. It reducesoverjet, maxillary expansion, and arch length for Class II Div 1 cases with deep or anterioropen bites. The result is a flattening of the labial protrusive bone. The “internal labialarch” of transseptal collagen fibers can be used to move areas containing teeth andbone. The anterior roots and crowns are up-righted and retracted. The premaxillarybone is remodeled distally but without impacting second molars. The Kussick™ RapidlyAdjusted Headgear System eliminates overjet while expanding the entire maxillary archwith stability (up to 10mm in the 1st molar and 5mm in the cuspid region) without usingrapid or cumbersome palatal exspansion appliances (RPE).
The Kussick™ HeadGear’s unique force indicator is calibrated with pre-set precision, colorcoded adjustments to allow slow to rapid buildup of forces.
Kussick™ FacebowSize Order mm Package
Number Contains
1 J01260 85 1
2 J01261 90 1
3 J01262 95 1
4 J01263 100 15 J01264 105 1
(measure from mesial end of headgear tube)
Kussick™ HeadGear J01257 1Replacement Pads J01256 10
For in-depth information please refer to page 36.
Kussick™Grinding CabinetThe Kussick™ Grinding Cabinet is designed to help facilitate the chairside insertion ofbasic bone remodeling appliances. The cabinet is adjustable from 32 inches to 48 inch-es for use either sitting or standing. It comes on castors and has an enclosed, lightedchamber to eliminate any dust or debris from collecting at chairside. The cabinet has afoot rheostat for positive motor control and comes fully wired for use, with the flexibility ofadding auxiliary devices. Auxiliary devices include 1) a removable x-ray viewing stand, 2)a portable water container for rinsing appliances prior to insertion, and 3) the flexibility ofone, two, or three motors with hand pieces. This is custom built equipment because ofthe numerous options. Special order delivery time is approximately three to four months.
Kussick™ Grinding Cabinet J01254
www.rmortho.com
firstpha
se
firstphaseLINGUAL ARCH DEVELOPER AND TROMBONE
®(CLARK®)
11
Lingual Arch Developer and Trombone® (Clark®)The Clark® Lingual Arch Developer provides a new means of quickly uncrowding whilesimultaneously achieving arch width and form. (Anterior sections and ClarkTrombones® sold separately.)
Order PackageNumber Contains
Anterior Section• The preformed anterior arch is made of .022" Tru-Chrome® stainless steel wire,
.040" end section with flanged collar.
• Available in two sizes.
• Universally used on upper and lower.
• Use only with the Clark® Trombone® (all types).
• Additional activation can be obtained by using a longer compression tube.
Anterior Section, Size 1 (26mm) A04740 5
Anterior Section, Size 2 (34mm) A04741 5
Clark® Trombone®
The Fixed/Removable® Clark® Trombone® is one of the key components of the Clark®
Lingual Arch Development technique. It consists of .040" Tru-Chrome® stainless steelwire laser welded to the 3D® lingual post and soldered to the .042" end section withflanged collar. It provides a module from which an unlimited variety of individualupper and lower Fixed/Removable® appliances can be fabricated.
• Available in three different types (1,2,3)
• Type 1 without mesial extension A04720 UL/LR 5A04721 UR/LL
• Type 2 with molar step-up mesial A04722 UL/LR 5extension for appliance fabrication A04723 UR/LLand selective expansion
• Type 3 with mesial extension for A04724 UL/LR 5appliance fabrication and selective A04725 UR/LLexpansion
• Works effectively with the Clark® Lingual Arch Developer
• The 3D® lingual post and tube provides easy vertical placement and removal.
www.rmortho.com
first
pha
se
12
firstphase
Order Package Number Contains
3D® Lingual Tube (Wilson®)
3D® Lingual Tube A04315 10
3D® Lingual Tube with Hook A04314 10
Order Package Number Contains
Clark Lingual Arch Developer (LAD®) Planner
i00518 1
Order Package Number Contains
Compression TubingF00242 1 spool
LINGUAL ARCH DEVELOPER AND TROMBONE®
(CLARK®)
www.rmortho.com
firstphase3D® 1ST PHASE FIXED/REMOVABLE® (WILSON®)
13
firstpha
se
Without changing your chosen technique, RMO® 3D® 1stPhase Fixed/Removable® Modular Orthodontics (Wilson®)can help your practice target treatment planning deci-sions to reduce treatment time and cost, and to improvepatient comfort and cooperation. This will result in build-upof your practice.
All principles have been proven through successful usagefor many decades. What is new and unique is the way theprinciples were engineered by Dr. William Wilson and Dr.Robert Wilson into an easy-to-use plug-in, plug-out systemof 12 modular options. Over 100 different 1st Phase treat-ment movements can be achieved with minimum appli-ances and maximum patient comfort and satisfaction.
The 3D® Lingual Arch System (Wilson®) is the result of fourdecades of lingual arch use, analysis and research,change and experimentation. All types of non bracket lin-gual appliances and molar band/tube fixations were eval-uated. Different orthodontic mechanical needs and possi-bilities were considered. The originators, Dr. William Wilsonand Dr. Robert Wilson were also concerned with harmo-nious lingual arch usage with various types of fixed andremovable techniques.
In perspective, the 3D® Fixed/Removable® System (Wilson®)should be considered as a comprehensive appliance sup-plementing system; it is a “tool box” of options. The numer-ous 3D® options help you add to the effectivity of theappliances you have chosen to deal with your diagnosisand treatment plan. Also, it is important to note that each3D® module is a subsystem by itself. That is, each has spe-cific areas for use and each has numerous supplementingoptions.
While 3D® Lingual Arche can be cut in half and used withacrylic to make Nance Holding Appliance for maxillaryarches, this 3D® Lingual Arche is designed primarily formandibular arches. The same is true for the 3D® Quad-Action Mandibular Appliance.
3D® lingual appliances for the various maxillary arch needsare: the 3D® Palatal Appliance, 3D® Multi-Action PalatalAppliance and the 3D® Quad Helix.
www.rmortho.com
first
pha
se
14
3D® 1ST PHASE FIXED/REMOVABLE® (WILSON®)firstphase
Like most things found in the dental profession, successful use dependsupon understanding and development of skills. The following are education-al materials and services.
Basic Textbooks: By Dr. Robert and Dr. William Wilson
Book 1 Enhanced OrthodonticsThis book reviews basic concepts and describes how the differentmodules affect 100 different 1st Phase treatment movements.Twenty case histories are described and documented. 435 pages,700 illustrations.
Order Number P00040
Book 2 Enhanced Orthodontics: 3D® Multi-Directional Force Systems Fabrication
This laboratory manual illustrates and describes step-by-step howthe 3D® Modules are adapted and used. It is a “how to” book onmaking modular appliances.
Order Number P00042
www.rmortho.com
firstpha
se
firstphase3D® TRANSFER SYSTEM (WILSON®)
15
3D® Transfer System
The key to in-practice and laboratory 3D® Appliance processing.
1. Preformed bands with 3D® Lingual Tubes and buccal tubes with .045" or .051"headgear tubes of your choice are fitted and cemented.
2. If molars are rotated, making it difficult for 3D® Maxillary Bimetric DistalizingArches to be fitted into the headgear tubes, adjust as follows:
A) Form an .018" molar rotating arch with horizontal helices just anterior to the“toed-in” headgear tube. Bend the distal ends of the arch wire to accom-plish the desired rotations so the posterior sections can be easily placedinto the headgear tubes.
B) Tie-in arch wire. When molars have rotated as desired, remove the archwire. You are now ready to employ the 3D® Transfer System.
Order PackageNumber Contains
3D® Transfer System
3D® Transfer Insert A04198 10
3D® Transfer Lingual Tube A04199 10
• Reduces time consuming laboratory related procedures.
• Laboratory impression can be taken during active treatment. (No need to stoptreatment.)
• Laboratory can produce very accurate Fixed/Removable® appliance.
• A time/cost saver. Excellent for in-practice and outside 3D® laboratory appliancefabrication procedures.
To correct upper molarrotations so 3D® Bimetric
Distalizing Arch willfit into buccal tube.
3D® Transfer Insert
3D® Transfer Lingual Tube
first
pha
se
16 www.rmortho.com
3D® TRANSFER SYSTEM (WILSON®) firstphase
Office ProceduresRMO® TruForm Molar Bands, prewelded with buccal tubes and 3D® Lingual Tubeshave been cemented in place on the patient.
1. The 3D® Lingual Tubes are covered with wax.
2. Insert the 3D® Transfer Inserts into the 3D® Lingual Tubes. The posts aredesigned as loose-positioning posts for the 3D® Transfer System, and not asthe friction-fit posts in the 3D® appliances.
3. Take soft colloid impression and remove after setting. Note how the insertposts are protruding through the impression.
4. The impression is now sent to the laboratory for 3D® appliance fabrication.
Laboratory ProceduresDoctor sends in an impression with 3D® Transfer Inserts already in position.
5. With scalpel, remove 3mm of colloid, lingual to the posts, for seating clearance.
6. Seat the 3D® Transfer Lingual Tubes on the protruding posts. If necessary,contour the retaining tabs of the 3D® Transfer Tube to insure retention in thestone model.
7. Add sticky wax over the 3D® Lingual Tubes and fill the space between thetubes and colloid.
8. Pour with stone and separate. The 3D® Transfer Lingual Tubes will be accu-rately positioned and securely attached to the stone model.
9. Proceed to fabricate the 3D® appliance on the stone model.
10. With knife, remove the 3D® Transfer Inserts from the colloid. Also, remove the3D® Transfer Lingual Tubes from the stone formed for future reuse or retain instone model for future 3D® modular components.
11. For commercial laboratories, send the finished 3D® appliance to the doctoron the stone model for reference.
2
1
3
5
7
8
6
9
www.rmortho.com
firstpha
se
17
3D® LINGUAL AND BUCCAL TUBES (WILSON®)firstphase
3D® Lingual Tube (Wilson®)The key to the 1st Phase System (Wilson®) is the 3D® Lingual Tube. All 3D® lingual mod-ules plug into these tubes. They are available with and without prewelded hooks. Theycan be purchased separately or as a preweld on RMO® TruForm Molar Bands.
• New, improved “click-fit” assures positive post seatingOrder Package
Number Contains
3D® Lingual Tube A04315 10
3D® Lingual Tube with Gingival Hook A04314 10
3D® Buccal Tubes (Wilson®)These tubes are designed with .018" x .025" (0.457mm x 0.635mm) and .022" x .028"(0.559 mm x 0.711mm) Edgewise arch slots and .045" (1.143mm) headgear tubes. The.045" round tubes are placed at the gingival to take advantage of the centroid princi-ple. When distalizing, tubes are available without and with -6° distal offset.
Distal .018" x .025" .045" .022" x .028" .045"Offset Right Left Right Left
Maxillary Double Tube
0° A04130 A04130 A04131 A04131 10
Without Hook
-6° A04132 A04133 A04134 A04135 10
With Hook
0° A04200 A04201 A04204 A04205 10-6° A04202 A04203 A04206 A04207 10
Buccal TubesSince Dr. Wilson recommends the use of buccal tubes with gingivally placed .045"head gear tubes, other buccal tubes of various fixed appliances with occlusally placedheadgear tubes can be successfully used with 3D® Maxillary Bimetric Distalizing Archprocedures.
When using 3D® Maxillary Bimetric Distalizing Arches with .045" or .051" occlusallyplaced buccal tubes, it is necessary to adjust the distal buccal section of the arch. Astep up bend is made anterior to the Omega Stop assembly. This enables the distalizingelements to function in the occlusally placed tube while the anterior elements of thearch are properly aligned with anterior brackets.
RMO now has buccal tubes and tube variations for all popular techniques. If your prac-tice is interested in incorporating selected 3D® 1st Phase Fixed/Removable® (Wilson®)options into your treatment regimens, it is easily done. Just order 3D® Lingual Tubes andyour preferred buccal tubes prescription welded to RMO® TruForm Molar bands.
first
pha
se
18 www.rmortho.com
.040"
.022" RD
BIMETRIC DISTALIZING ARCH
firstphase3D® FIXED/REMOVABLE® (WILSON®) COMPONENTS
3D® Lingual Arch• Easy vertical placement and removal
• Mandibular anchorage
• Holding arch for extraction and non extraction cases
• Mandibular arch length increase, including sight molardistalization, one side at a time
• Lower molar rotation, torquing and tipping
• Second molar controlOrder Package
Size Number Contains
1 - 51mm A04300 32 - 54mm A04301 33 - 57mm A04302 34 - 60mm A04303 35 - 63mm A04304 36 - 66mm A04305 37 - 69mm A04306 38 - 72mm A04307 3Assorted K00760 303D® Lingual Arch Selector i00505 1
3D® Maxillary Bimetric Distalizing Arch• Rapid molar distalizing (no headgear required)
• Rapid anterior retraction (no headgear required)
• Rapid anterior intrusion (no headgear required)
• Functional arch increase
• Release of post-lock mandible to allow forward growthOrder Package
Size Number Contains
1 - 80mm A04155 3
2 - 83mm A04156 3
3 - 86mm A04157 3
4 - 89mm A04158 3
5 - 92mm A04159 3
6 - 95mm A04160 3
7 - 98mm A04161 3
Assorted K00678 14
3D® Maxillary BimetricDistalizing Arch Selector i00507 1
.025" RD
.028"
3D® LINGUAL ARCH
www.rmortho.com
firstpha
se
19
firstphase3D® FIXED/REMOVABLE® (WILSON®) COMPONENTS
3D® Bimetric Arch (basic)• For making a 3D® Maxillary Bimetric Distalizing Arch
• Same as 3D® Maxillary Bimetric Distalizing Arch plus spe-cial applications in unilateral distalization
Order PackageSize Number Contains
1 - 40mm A04127 32 - 43mm A04128 33 - 46mm A04129 34 - 49mm A04150 35 - 52mm A04151 36 - 55mm A04152 37 - 58mm A04153 38 - 58mm A04154 3with extended section (6mm) each side
Assorted K00688 153D® Bimetric Arch Selectori00506 1
.022” RD
.040” RD
MAXILLARY BIMETRIC ARCH
Order PackageNumber Contains
Omega Adjustable Stop A04124 10
5mm Coil SpringOpen Elgiloy® coil spring. Does not require heat treatment percent. For use withBimetric Distalizing Arch.
.010" x .045" x 5mm F00125 50
Open Orthonol® Coil Spring, constant force gradient of nickel titanium when distaliz-ing (Schedule II elastics only).
.012" x .045" F00126 10
Energy Pak™ Elastics PackageContains (Approximately)
Nonextraction cases
5/16" 2 oz. J01103 2,0005/16" 3 oz. J01113 2,000
Extraction cases
1/4" 2 oz. J01102 2,0001/4" 3 oz. J01112 2,000
first
pha
se
20 www.rmortho.com
firstphase3D® FIXED/REMOVABLE® (WILSON®) COMPONENTS
SCHEDULE #1 (2 oz. elastics)Used with:
• Flaring lower incisors
• Small mandibular roots
First Second Last5 days of 5 days of 11 days ortreatment treatment until nextuse: use: visit use:
3 - 2 oz. 2 - 2 oz. 1 - 2 oz.elastics elastics elastics
Using 2 oz elastics, three elastics should be usedduring the first five days, two during the secondfive days and one during the final eleven daysof the treatment plan. Fresh elastics are applieddaily. Elastics must be worn 24 hours each daybetween appointments, including during meals.
Use RMO® 5/16" 2 oz. elastics for non-extractioncases.Order No. J01103
Use RMO® 1/4" 2 oz. elastics for extraction cases.Order No. J01102
SCHEDULE #2 (3 oz. elastics)Most common usage:
• Class II Div. 2
• Class II Div. 1 with closed bite
• Cases with steep cusps
• Adult cases
First 10 days of Until nexttreatment use: visit use:
2 - 3 oz. elastics 1 - 3 oz. elastics
Two RMO® 3 oz. elastics used during the first 10days. Then, one 3 oz. elastic is worn until nextadjustment. Fresh elastics are applied each 12hours and are worn 24 hours daily, including dur-ing meals.
Use RMO® 5/16" 3 oz. elastics for nonextractioncases.Order No. J01113
Use RMO® 1/4" 3 oz. elastics for extraction cases.Order No. J01112
Elastic Load Reduction Principle For the 3D® Maxillary Bimetric Distalizing Arch
www.rmortho.com
firstpha
se
21
.029" RD
.038" RD
Blue Elgiloy®
firstphase3D® FIXED/REMOVABLE® (WILSON®) COMPONENTS
3D® Quad Helix• Easy vertical placement and removal
• A single fixed/removable® alternative to multiple removable appli-ances
• Bilateral molar expansion
• Bilateral maxillary arch expansion
• Molar rotation torquing and tipping
• Selective cuspid and bicuspid expansion
• Excellent for correcting cross bites in pediatric dental patients
Order PackageSize Number Contains
1 A04308 32 A04309 33 A04310 34 A04311 35 A04312 36 A04313 3Assorted K00770 6
3D® Multi-Action Palatal Appliance• Some clinicians have expressed a need for a less complex expan-
sion appliance. This is the alternative to the Quad Helix.
• Excellent for adult orthodontics.
• Easy vertical placement and removal.
• More than just a palatal arch.
• A single fixed/removable® alternative to multiple removable appliances.
• Total maxillary arch expansion.
• Selective cuspid and bicuspid expansion.
• All major rotations, torquing and tipping.
Order PackageSize Number Contains
1 - 32mm A04320 32 - 36mm A04321 33 - 40mm A04322 34 - 44mm A04323 35 - 50mm A04324 36 - 56mm A04325 3Assorted K00780 6
.025" RD
.036" RD
first
pha
se
22 www.rmortho.com
firstphase3D® FIXED/REMOVABLE® (WILSON®) COMPONENTS
3D® Palatal Appliance• Easy vertical placement
• Transpalatal arch
• Molar expansion or contraction
• High pull headgear control
• Molar rotation, torquing and tipping
• Molar expansion
• Palatal cusp intrusive action to offset extrusive action during highpull headgear usage
Order PackageSize Number Contains
1 - 32mm A04330 32 - 36mm A04331 33 - 40mm A04332 34 - 44mm A04333 35 - 50mm A04334 36 - 56mm A04335 3Assorted K00790 6
3D® Multi-Action Mandibular Appliance• Easy vertical placement and removal
• Solves many problems for those using Crozat-type appliances
• Arch expansion
• Selective expansion
• Incisor advancement
• Slight molar distalization (one side at a time)
• Lower molar rotation, torquing and tipping
Order PackageSize Number Contains
1 - 51mm A04340 32 - 54mm A04341 33 - 57mm A04342 34 - 60mm A04343 3Assorted K00795 4
.036" RD
.025" RD
.030" RD
.025" RD
www.rmortho.com
firstpha
se
23
3D® FIXED/REMOVABLE® (WILSON®) COMPONENTS firstphase
3D® Sectional• Easy vertical placement and removal
• Impacted cuspid activator
• Simple expander
• Simple bicuspid space maintainer
• Simple bicuspid space regainer
• Cantilever resistor, molar tip-back resistor
Order PackageNumber Contains
Maxillary Right/Mandibular Left A04345 5
Maxillary Left/Mandibular Right A04346 5
3D® Adapter• Easy vertical placement and removal
• Simple space maintainer
• Mandibular molar tip-back resistor
• Maxillary molar tip-back resistor
• Cross elastic hook
• Simple expander
Order PackageNumber Contains
Maxillary Right/Mandibular Left A04347 5
Maxillary Left/Mandibular Right A04348 5
3D® Space Maintainer• Easy vertical placement and removal
• Second bicuspid space regainer
• Temporary fixed/removable® functional space maintainer/bridge
Order PackageNumber Contains
Maxillary Right/Mandibular Left C00131 5
Maxillary Left/Mandibular Right C00132 5
.030" RD
.025" RD.025" RD
LINGUAL OFFSET
4MM MARKINGS
.025" RD .030" RD
first
pha
se
24 www.rmortho.com
firstphase3D® FIXED/REMOVABLE® (WILSON®) COMPONENTS
3D® D.Y.S. Module• The 3D® D.Y.S. (Do-It-Yourself) Module (Wilson®). Provides a basic module from
which a variety of individual upper and lower fixed/removables can be fabri-cated. One unit is for upper right and lower left. The other unit is for upper leftand lower right. The 3D® D.Y.S. Module is available in .036" and .040" Tru-Chrome® Stainless Steel. All wire sizes are laser welded to the 3D® Posts, whichplug into the 3D® Lingual Tubes. The many creative ways this 3D® Module canbe used in individualized Fixed/ Removable® appliance construction are limit-ed only by one’s imagination.
• Easy vertical placement
• Universal lingual attachment
• Multiple Fixed/Removable® laboratory fabricated appliances to suit numerousindividual needs.
Wire Order PackageSize Size Number Contains
Maxillary Right/Mandibular Left .036 A04350 5
Mandibular Right/Maxillary Left .036 A04351 5
Maxillary Right/Mandibular Left .040 A04352 5Mandibular Right/Maxillary Left .040 A04353 5
Functional Incline Plane
Temporary
Prosthesis
NanceHolding Arch
firstphase3D® WILSON®/DILLEHAY LINGUAL ARCH VARIATIONS
25
firstpha
se
www.rmortho.com
3D® Wilson® / Dillehay Lingual Arch - Straight Length• .036” Diameter Blue Elgiloy® (not heat-treated)• Laser-welded posts• Step down bends for proper positioning at cingulum
Order PackageSize Number Contains
3 - 57mm A04265 5
4 - 60mm A04266 5
5 - 63mm A04267 5
6 - 66mm A04268 5
7 - 69mm A04269 5
8 - 72mm A04270 5
9 - 75mm A04271 5
10 - 78mm A04272 5
3D® Wilson®/ Dillehay Preformed Lingual Arch- with distal extension
• .036” Diameter Blue Elgiloy® (not heat-treated)• Easy vertical placement and removal• Distal extension for molar uprighting
Order PackageSize Number Contains
3 - 57mm A04278 3
4 - 60mm A04279 3
5 - 63mm A04280 3
6 - 66mm A04281 3
7 - 69mm A04282 3
8 - 72mm A04283 3
9 - 75mm A04284 3
10 - 78mm A04285 3
3D® Wilson® / Dillehay Preformed Lingual Arch- with distal bend
• .036” Diameter Blue Elgiloy®
• Easy vertical placement and removal
• Holding arch for extraction and non-extraction cases
• Lower molar rotation, torquing and tippingOrder Package
Size Number Contains
3 - 57mm A04252 3
4 - 60mm A04253 3
5 - 63mm A04254 3
6 - 66mm A04255 3
7 - 69mm A04256 3
8 - 72mm A04257 3
9 - 75mm A04258 3
10 - 78mm A04259 3
.027"
.036" RD Blue Elgiloy®
.027"
.036" RD Blue Elgiloy®
.036" RD Blue Elgiloy®
.027"
.027"
firstphase
26
HABIT CORRECTION ROLLERS AND PROTECTORS (HASKELL)
www.rmortho.com
Order PackageNumber Contains
Habit Correction Rollers:• Reverse digit sucking and tonque thrusting
• Fabricate chairside
• Use on quad helix and transpalatal appliances
• Non-compliance device
Tonque Protection Rollers:• Prevent tonque irritation from palatal appliance
• Place on lateral segments of appliance
• Fabricate chairside
Habit Correction Roller, hexagonal, 5.25 mm long J03300 4 (8 halves)
Tongue Protection Roller, round, 5.25 mm long J03301 4 (8 halves)
Tongue Protection Roller, round, 12.0 mm long J03302 4 (8 halves)
KitsK00796 - Habit Correction Roller, hexagonal (pkg of 4)
- 3D® Wilson Quad Helix Assorted (pkg of 6)
- 3D® Wilson Lingual Tube (pkg of 10)
K00797 - Tongue Protection Roller, round, 5.25 mm long (pkg of 4)
- 3D® Wilson Quad Helix Assorted (pkg of 6)
- 3D® Wilson Lingual Tube (pkg of 10)
K00798 - Habit Correction Roller, hexagonal (pkg of 4)
- 3D® Wilson Quad Helix Assorted (pkg of 6)
- 3D® Wilson Lingual Tube with hook (pkg of 10)
K00799 - Tongue Protection Roller, round, 5.25 mm long (pkg of 4)
- 3D® Wilson Quad Helix Assorted (pkg of 6)
- 3D® Wilson Lingual Tube with hook (pkg of 10)
first
pha
se
www.rmortho.com 27
firstpha
se
firstphaseORTHOPEDIC FACE MASK (DELAIRE)
Mandibular prognathism exists in many children, and is often associated withmaxillary insufficiencies.
Maxillary insufficiencies are conditions which embody maxillary brachygnathia,retrognathia and micrognathia; the causes of these disorders may be constitu-tional. However, according to Drs. Delaire and Verdon of France, most often thedisorders (which are at the origin of a maxillary deficiency) are functional.
The Delaire Orthopedic Mask is an excellent appliance for intercepting and cor-recting diagnostically selected maxillary deficiencies of young patients. “Young”typically means from 3 1/2 to 4 years old or from the time when a double arch(lingual and labial) with bands can be used.
Orthopedic Face Mask (Delaire) Stainless Steel• Excellent method for intercepting Class III cases caused by maxillary insuffi-
ciencies. Can modify orientation of the maxilla, in relation to the upper cra-nial implantation.
• Can improve the growth of the anterior part of the maxilla.
• Can cause mesial movement of the upper dento-alveolar arch, in relation tothe maxillary base.
• Can cause distal movement of lower dento-alveolar arch, in relation tomandibular base.
• Heavy forces applied throughout treatment by elastics attached to anchoragepoints.
• Made of .078" (1.98mm) wire and acrylic, set screws held in metal housing inacrylic parts. Vertical height adjustable to 13/16" (2cm).
• Elastics and wrench included.
Order PackageNumber Contains
Standard size J00410 1
Large size J00411 1
Replacement elastics J01182 2,000 approx.
28
first
pha
se
Order PackageNumber Contains
Space Maintainer KitAn introductory space maintainer assortment. K00005 34 preformed seamlessA starter kit with bands and space maintainers for bands, 1 each of banding maxillary and mandibular 6-year molars. sizes 11 through 27,Bands are provided in the size range most Max. and Man.,frequently used. Space maintainers can 10 open end maintainers, joined to RMO Bands. 10 occlusal bar-type
maintainers
Open End Maintainer.040" (1.02mm) Stainless Steel C00130 10
C00141 10
3D® Space Maintainer and Space Regainer (Wilson®) (Pat. 4,354,834)Features:
• Plugs into 3D® Lingual Tube welded to molar band
• Effective in permanent and mixed dentition
• Positive space maintainer
• Adjustable for rapid second bicuspid space regainer
• Convertible to functional maintainer or temporary bridge by adding artificial tooth
• Removable
• Interchangeable with other 3D® Modules for active treatment with no band changeoversOrder Package
Number Contains
Maxillary Right/Mandibular Left C00131 5
Maxillary Left/Mandibular Right C00132 5
Muscle Anchorage Appliance (Denholtz)• Preformed stainless steel
• .036" (0.914mm) arch wire
• .045" (1.143mm) buccal tube recommended
• Tissue compatible rubber shield with integrated coil spring
• Utilizes light continuous forces of lip muscles
• Helps regain lost space, minor uprighting, and develops lip musculature
• Can be used as a lip bumperOrder Package
Number Contains
Maxillary P00046 2
Mandibular P00047 2
One each maxillary and mandibular P00067 2
firstphaseSIMPLE SPACE MAINTAINERS/DENHOLTZ MUSCLE ANCHORAGE
after assembly
after assembly
www.rmortho.com
www.rmortho.com 29
firstpha
se
intraoralextraoral
diagnosticsLIGHT WIRE STAINLESS STEEL OR PLASTIC
diagnostics
intra
ora
lext
rao
ral
32 www.rmortho.com
intraoralextraoralENERGY PAK™ ELASTICS
• Superior quality-pure latex (contains natural rubber latex which may cause allergic reactions)
• Precision cut provides consistent forces
• Three types available: general purpose, cuspid-to-cuspid, extra oral
• Packaged in illustrated zip-lock bags for dispensing convenience - 100 elastics perbag 20 bags to each package (approximately 2,000 elastics)
• Wide size selection permits precise degree of control
• Excellent resistance to fluid absorption
Force ValuesOunce pull equals three times slack diameter
3/4"5/8"1/2 "1/8" 3/8"5/16"1/4"3/16"
1.90cm1.59cm1.27cm0.32cm 0.95cm0.79cm0.64cm0.48cm
General PurposeLight 57gm
(2 oz.)
Cuspid to CuspidLight 57 gm
(2 oz.)
ExtraoralLight 454 gm
(16 oz.)
Extra 142 gm
Heavy (5 oz.)
Heavy 128 gm
Plus (4.5 oz.)
Heavy 99 gm
(3.5 oz.)
Medium85 gm
(3 oz.)
Heavy 99 gm
(3.5 oz.)
Heavy 908 gm
(32 oz.) Note on Extraoral:To achieve ounce pull, twoelastics must be used.
parachute
J-1100hang glider
J-1101balloon
J-1102dirigible
J-1103helicopter
J-1104
motor home
J-1111truck
J-1112train
J-1113
canoe
J-1121
monorail
J-1114
surfboard
J-1120submarine
J-1124speedboat
J-1123sailboat
J-1122
motorcycyle
J-1131race car
J-1132car
J-1133snowmobile
J-1134
skate board
J-1141jogging
J-1144bicycle
J-1143unicycle
J-1142
skating
J-1156snow shoeing
J-1157
snow skiing
J-1167toboggan
J-1166
bus
J-1171ocean liner
J-1172jumbo jet
J-1173spaceship
J-1174rocket
J-1175
rickshaw
J-1181horse
J-1182chariot
J-1183covered wagon
J-1184stage coach
J-1185
33
intrao
rale
xtrao
ral
www.rmortho.com
intraoralextraoralBULK ELASTICS, ENERGY CHAIN™
Bulk Elastics• Finest quality latex surgical tubing (contains natural rubber latex which may cause allergic reac-
tions)
• Top performance, fatigue life and force reliability
• Uniform precision cut for size and dimension
• May be used as separating elastics prior to band fitting
Size Medium Heavy Package
Inch (mm) Contains
1/16" (1.58) J00127 approx. 2,000
3/32” (2.38) J00128 approx. 2,000
1/8" (3.18) J00129 approx. 2,000
3/16" (4.76) J00130 approx. 2,000
1/4" (6.35) J00131 J00134 approx. 2,000
5/16" (7.94) J00132 J00135 approx. 2,000
Energy-Chain™ Elastics• Tough and tasteless, non-toxic, non-staining, more consistent force delivery
• Easy-handling dispensing spools
• Spacing variation between modules allows proper selection, retraction, ligating,maxillary/mandibular/interarch application, etc.
• Available in clear, gray and an assortment of popular colors
• Package of one spool contains seven feet, five inches
Blue Green Red Purple Orange Gray Clear Package Contains
Closed J00223 J00227 J00231 J00235 J00239 J00166 J00120 1 spool
Narrow J00224 J00228 J00232 J00236 J00240 J00167 J00121 1 spool
Medium J00168 J00122 1 spool
Plastic Pocket Containers• Zippered polyethylene bag
• Elastic placement diagram on package
• Convenient pocket-size dispenser
Order PackageNumber Contains
J00092 100
intra
ora
lext
rao
ral
32 www.rmortho.com
intraoralextraoral
Ligatures and Separators• Convenient dispensing
• Strong, tasteless, maintains retentionRadio Package
Gray Clear Color Opaque Contains
Ligature “S” Shaped Dispenser J00156 J00154 1,000(10 dispensers)
Synergy Low-Friction Ligatures J00151 1,000• silicone injected white opaque• reduced friciton• good stain resistance• low profile
(10 dispensers)
Single Case Ligature Stick J00221 J00220 J00320/blue 990(45 sticks) J00321/green
J00322/orange
J00323/red
J00324/purple
J00325/silver
J00326/pink
J00327/glow
J00328/white
J00329/black
Ligature Ringlets on Rings; J00175 J00176 1,000(10 rings)
Separator Sticks J00177/blue J01451 1,000(100 sticks)
Separators Cut J00178/blue J01450 1,000(approximately)
Elastomeric Ligatures• Preloaded cane dispensers
• Easily engages under tie wings
• Retains resiliency over long periods of time
• Resists fluid absorption and odor PackageGray Clear Contains
Ligature Canes .110” (2.79 mm)
20 canes of one color J00182 J00184 1,000
Ligature Canes .120" (3.05 mm)
20 canes of one color J00183 J00185 1,000
LIGATURES/SEPARATORS
35
intrao
rale
xtrao
ral
www.rmortho.com
intraoralextraoralELASTIC THREAD, ROTATION WEDGES
Elastomeric Rotation Wedges• Produces rotational force by snapping perforated tab over tie wings of bracket,
inserting arch wire in groove of wedge and ligating opposite tie wings of bracket toarch wire.
• Wedge acts as fulcrum between bracket and arch wire• Gray color Package
Gray Contains
J00174 50 (5 sticks)
Tubular and Square Elastomeric Elastic Tie Thread• Microminiature tubing
• Consistent resiliency and knot retention
• Resists stain, odors, moisture resorption
• Good elastic memory
• Handles rotation, retractions, lingual ties, etc.
• Colors blend with appliancesPackage
Gray Clear Contains
.025" (0.635mm) , 25 ft. J00187 J00186 1 spool
.030" (0.762mm) , 25 ft. J00189 J00188 1 spool
.018" x .018" (0.45mm x 0.45mm), 50 ft. J00191 J00180 1 spool
.026" x .026" (0.65mm x 0.65mm), 50 ft. J00192 J00181 1 spool
Elastic Ligature Thread (Goldstein)• Specifically for separation, retraction, high canines/incisors, rotations, final space
closures
• Tightly wound nylon and rubber
• Resists moisture and breakdown
• Functions without adjustments through 2-4 appointments
• Color coded spools
• Each spool contains approximately 100 feet
PackageAssort. Contains
Light Weight - Yellow J00050 1 spool
Medium Weight - Red J00051 1 spool
Heavy Weight - Blue J00052 1 spool
intra
ora
lext
rao
ral
36 www.rmortho.com
ALGINATE/IMPRESSION TRAYS intraoralextraoral
Ortho-Jel® Alginate• Heavy body – Type I alginate
• 30 second setting time
• Creamy consistency provides excellent detail
• Pleasant vanilla flavor
• “3-Color-Signalling” mixing feature: mix with water, turns violet; turns pink, load tray; turns white, insert into mouth
• 2-year shelf lifeOrder Package
Number Contains
One tub (contains 2-500 gm bags) J00247 1 kg (2-500 gm bags)
One tub (contains 2-500 gm bags) and 8-500 gm bags J00248 5 kg (10-500 gm bags)
Ortho-Jel® is non-returnable
RMO® Disposable Impression Trays• Designed specifically for orthodontic use
• Made from reinforced disposable plastic. A rigid, high-impact, FDA-approvedstyrene and dye. They are 100% recyclable.
• Features smooth, rounded edges, anterior retention slots and vertical perforationsfor enhanced material retention
• Are anatomically correct with a palatal ridge for optimum fit and greater patientcomfort
• Ideal for use with RMO Ortho-Jel® Alginate or any other impression material
Order Number Order Number Order PackageSize Maxillary Mandibular Number Contains
Small (Blue) J01233 J01243 10
Medium (Green) J01234 J01244 10
Large (Yellow) J01235 J01245 10
Assortment, Max/Man (5 of each size) K00455 30 trays
Tray Adhesive J01250 2 (1/2 oz.) bottles
37
intrao
rale
xtrao
ral
www.rmortho.com
FACEBOWS/LIP BUMPERSintraoralextraoral
Facebow (Ricketts®)• Flexible, permits natural expansion
• Outer bow loop provides vertical auxiliary control
• Laser welded and brazed into a strong single unit
Order Number Package Contains
Non-extraction/Large Arch J00400 1
Extraction/Small Arch J00401 1
Penta-Form™ Loop Style Facebow-stainless steel• 5 sizes of inner bow. Length in millimeters is measured from distal end of loop
along inner arch to distal end of opposite loop
• .078 spring tempered outer bow
• .045 inner bow
• Comfortable, avoids frontal cheek area
• Soldered into a strong single unit
• Marked with size and midline indication
Size Order Number Package Contains
1 93mm J01270 1
2 100mm J01271 1
3 107mm J01272 1
4 114mm J01273 1
5 121mm J01274 1
Universal Full Form J01277 1
Kussick® Facebow - Stainless Steel• 5 sizes of inner bow• Length in millimeters is measured from the mesial end of the headgear tube
Size Order Number Package Contains
1 85mm J01260 1
2 90mm J01261 1
3 95mm J01262 1
4 100mm J01263 1
5 105mm J01264 1
Lip Bumper (Ricketts®) stainless steel with lateral setbackOrder Number Package Contains
Large P00100 5
Small P00101 5
intra
ora
lext
rao
ral
38
intraoralextraoral
The patented Spring-Gear™ is a comfortable, safe headgear which continues toexert equal forces on the dentition, regardless of which head movements aremade. The Spring-Gear™ was developed and comprehensively tested in orthodonticpractices and patented worldwide. Comfort, freedom of movement, safety and, ofcourse, effectiveness were the principles adopted during development.
Applied ForceSeven force levels can be precisely applied by the clinician: 400, 450, 500, 550,600, 650, 700gm. The strap is marked with seven colors which correspond to theapplied forces. Because a nickel-titanium spring is used to develop the force, it ismaintained at the level set by the clinician until he/she changes it.
ComfortThe flexible, transparent Spring-Gear™ tube adapts to fit every neck size. The soft,blue neck cushion on the interior is washable and can be replaced by a new one ifrequired.
SafetyA simple, but effective, system ensures that the snap-way attachments detach fromthe face bow, if excessive force is applied. Ingenious design and choice of materialguarantees that the releasing force remains constant throughout treatment.
Equal forcesA virtually friction-free Nickel-Titanium spring ensures that the forces exerted on thedentition scarcely change regardless of the direction in which the patient moveshis/her head.
A study by the Netherlands Organization for Applied Scientific Research showed theforces on the 1st molars did not change when the head moved with patients wear-ing Spring-Gear™ cervical headgear. This is a problem with conventional headgearin that the forces on the 1st molars change with each movement of the head. This isbecause the headgear does not slide around the neck like it does with Spring-Gear™.
Fitting the Spring-Gear™ to the individual patient is very simple. Sliding the snap-wayattachments along the strap enables the Nickel-Titanium to be extended to thepoint where ideal strength is reached.
Order Number Package Contains
Spring-Gear™ 400-700gm J00521 1 Spring-Gear/1 Neck Pad
Replacement Neck Pads J00525 10
www.rmortho.com
SPRING-GEAR™
39
intrao
rale
xtrao
ral
www.rmortho.com
intraoralextraoralSAFETY HEADGEAR SYSTEM
Safety Headgear System reduces the potential hazard of slingshot rebounds ofheadgear. If the facebow is pulled with excessive force, clips holding the springrelease modules disconnect automatically and disengage the facebow.Reassembly after release is easy for the patient.
The system is available with cervical traction pads and high-pull head straps, andbilateraltwo-part safety release modules. Steel coil springs are incorporated in modules toprovideconstant traction force. When contracted, springs are calibrated to produce medi-um and heavy forces. Facebow attachment straps are color-coded to easily identi-fy force levels. Neckpads and head straps are in denim fabric.
Order Number Package Contains
Cervical Neckpad with 2 Modules
Medium (14 oz.) J00390 1
Heavy (18 oz.) J00391 1
High-Pull Head Strap with 2 Modules
Medium (14 oz.) J00392 1
Heavy (18 oz.) J00393 1
Neckpad J00394 1
High-Pull Head strap J00395 1
Modules Medium (14 oz.) J00396 2
Modules Heavy (18 oz.) J00397 2
intra
ora
lext
rao
ral
40 www.rmortho.com
RMO® DRIVE TUBEintraoralextraoral
The new RMO® Drive Tube offers simple, effective distalization while full arch brackettreatment is carried out. With just a simple screw activation, applied by either doctoror patient, the treatment is efficient, concise and quick. Proven with over three yearsof extensive clinical use, the RMO® Drive Tube has been found to be effective forunilateral or bilateral, maxillary and mandibular distalization. Furthermore, chair timeis kept to a minimum as the tube is easily ligated to any popular archwire or brack-eting system using .018 or .022 slot size. Brackets remain in place as you distallydrive those once difficult to move molars, with or without second molar extractions.
Size Order No. Package Contains
RMO® Drive Tube – Molar Distalizing .018" A00300 5
RMO® Drive Tube – Molar Distalizing .022" A00301 5
RMO® Drive Tube Set Screw A00302 10
RMO® Ball Retainer Clasp .8mm A00291 10
RMO® Drive Tube Hex Wrench – L-shaped .035" i00033 10
RMO® Drive Tube Kit – 5 cases .018" K00012 1 Kit
RMO® Drive Tube Kit – 5 cases .022" K00013 1 Kit
41
intrao
rale
xtrao
ral
www.rmortho.com
intraoralextraoralMYTGUARD™
The Ultimate in MouthGuard ProtectionRMO®’s MyTGuard™ is made of a special material that exactly molds to yourpatient’s individual teeth including braces. Even as teeth move during orthodontictreatment, the MyTGuard™ can be refitted to accommodate change.
MyTGuard™ is a dental device designed to absorb and dissipate severe blows to themouth area. The research and testing utilized in its development are far superior toindustry standards.
If a blow to the face occurs, MyTGuard™ allows severe impact forces to be immedi-ately dampened and directed away from teeth and delicate facial bones, includ-ing the TMJ. This dampening and redirecting of the impact forces help to preventconcussion-causing vibrations from penetrating the nasal cavity, brain and head.MyTGuard™ also serves to reduce trauma to the lips, tongue, cheeks and gum tis-sue.
Further enhancing its protective capabilities is the fact that it is the only mouthguardcapable of taking a full upper and lower dental impression. No other mouthguardcomes close to protecting your patient as well as the MyTGuard™ mouthguard.
Order Number Package Contains
Light Blue J00540 1
Dark Blue J00541 1
Black J00542 1
Yellow J00543 1
bands
diagnosticsdiagnostics
ba
nds
44
RMO® TRUFORM BANDS
www.rmortho.com
bands
Buccal groove to fit toothbuccal groove.
Rolled occlusal edge
Lingual groove to fittooth lingual groove.
Permanent marking systemwith Palmer notation.
Orthodontic bands have been basic to theprogress of orthodontics since the begin-ning of this science. Techniques havechanged and materials have improved,from nickel-silver clamp bands with project-ing nut and bolt, to precious metals, toswagged rings and, finally, to chrome alloypreformed orthodontic bands developedfirst by Rocky Mountain® Orthodontics(RMO®). While prefabrication has beentried before, the application of chromealloy made it possible to provide greateredge strength, greater fitting qualities andhealthier appearing appliances. The break-through in effective, time-saving orthodon-tic bands stemmed from original RMO®
engineering and clinical testing and madeit possible to cut operating time by morethan 75%.
RMO®’s TruForm bands offer the following:
• Proper Temper – RMO® TruForm bands are of a desirable and popular temper for quick, accurate adaptation to the anatomy of the tooth.
• Proper Contour – The shape of TruForm bands is established by clinical use. The occlusal edge is slightly rolled to enhancefitting and prevent cement ridge. They areproperly festooned to conform accuratelyto the tooth anatomy.
• Proper Sizes – RMO® TruForm bands are furnished in 36 sizes.
• Proper Identification – RMO® TruFormmolar bands are permanently markedusing the Electro Scribe® process which ispermanent, dark and easy to see.
• Proper Finish – All RMO® TruForm bandshave a lustre finish outside and a velvet fin-ish inside.
• Proper Width – All RMO® TruForm molarbands meet any technique requirement.
• RMO® TruForm Bands with unmatchedquality are anatomically shaped for func-tional fit and made from the true RMO®
temper.
• RMO® TruForm molar bands are offeredin both universal and left/right specificversions for maxillary and mandibularmolars in all standard size ranges as well aspedo. For proper fitting, RMO® highly rec-ommends the presence of a lingualattachment for optimal fitting.
• No Preweld Charge – RMO® offers to preweld the buccal and lingual attach-ment to any of RMO®’s bands as long asthe attachments conform within the stan-dard preweld position guide. Customassemblies which include any RMO®
attachment/bands prewelded to otherthan the standard preweld position guideare available; please allow extra time.
45
ba
nds
www.rmortho.com
bandsRMO® TRUFORM BAND MARKINGS
6 20
Palmer Symbol and Tooth No.
Band Size
1st Molar Left MandibularSize 20 (6LL20)
2ND Molar Left MandibularSize 20 (7LL20)
RMO® Molar Bands New Marking Specification
7 20
6
66
6
6 6
Palmer notation symbols molarbands.
max. left
man. right
man. univ.max. univ.
man. left
max. right
ba
nds
46 www.rmortho.com
bandsTRUFORM BANDSMAXILLARY FIRST MOLAR RIGHT AND LEFT
Primary Second Plus First Permanent, Tube/Bracket Placement, Equal Number of Rights andLefts
Total
Band Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 4 4 4 4 4 4 4 4 4 4 4 4 6 6 8 10 12 12 12 12 10 8 8 8 6 6 6 4 4 4 4 4 4 4 4 4
K00518
• Design – Right and left shape for precise and comfortable fitting
• Size identification and Palmer notation are permanently marked to withstand heat sterilizationusing Electro-Scribe® marking process
• Proper sizes – Proportionately graduated sizes of true RMO® temper and for use on primary molars and first permanent molars.
• Developed through years of RM® Band Manufacturing.
• Dimensional strength to remain stable without deformation during trial fitting, with minimal separation.
• Withstands mastication and external appliance stress.
214
First Permanent Only, Tube/Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 4 6 6 8 8 10 12 12 12 12 10 10 8 8 6 6 6 4 4 4 4 4 4 4 4 4
K00520
100 Band Assort. 2 2 2 4 4 4 6 8 10 10 10 10 8 6 6 4 2 2
K00158
180
100
47
ba
nds
www.rmortho.com
bandsTRUFORM BANDSMANDIBUALR FIRST MOLAR RIGHT AND LEFT
Primary Plus First Permanent, Tube/Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 4 4 4 4 4 4 4 4 4 4 6 8 8 10 12 12 12 12 12 10 8 6 6 6 6 4 4 4 4 4 4 4 4 4 4 4
K00558
• Design – Right and left shape for precise and comfortable fitting
• Size identification and Palmer notation are permanently marked to withstand heat sterilizationusing Electro-Scribe® marking process
• Anatomically Shaped – Designed to conform to buccal/lingual inclination. Adapts to the anato-my of the tooth accurately so that the occlusal/buccal surface is out of occlusion. The band fitshigh enough on the lingual to ensure that the lingual groove of the band fits into the lingualgroove of the tooth.
• Proper sizes – proportionatley graduated sizes of true RMO® temper and for use on primary molars and first permanent molars.
• Developed through years of RM® Band Manufacturing.
• Dimensional strength to remain stable without deformation during trial fitting, with minimal separation.
• Withstands mastication and external appliance stress.
218
First Permanent, Tube/Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 8 8 10 12 12 12 12 12 12 8 8 6 6 6 4 4 4 4 4 4 4 4 4 4 4
K00560
100 Band Assort. 2 2 2 4 4 4 6 8 10 10 10 10 8 6 6 4 2 2
K00159
176
100
ba
nds
48 www.rmortho.com
TRUFORM BANDSMAXILLARY FIRST MOLAR UNIVERSAL
bands
Primary Plus First PermanentTotal
Band Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 2 2 2 2 2 2 2 3 3 3 3 4 4 5 7 8 9 9 9 9 8 7 6 6 5 5 4 4 3 3 2 2 2 2 2 2
K00510
• Design – anatomically shaped – clinically determined – functional fit with complete adaptationto tooth anatomy
• Size identification and Palmer notation are permanently marked to withstand heat sterilizationusing Electro-Scribe® marking process
• Complete size range – proportioned size range for use on primary molars and first permanent molars
• Buccal groove for orientation to tooth anatomy
• Developed through years of RM® Band Manufacturing.
• Dimensional strength to remain stable without deformation during trial fitting, with minimal
separation.
• Withstands mastication and external appliance stress.
153
Right and Left, Tube/Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 4 4 4 4 4 4 4 4 4 4 4 4 6 6 8 10 12 12 12 12 10 8 8 8 6 6 6 4 4 4 4 4 4 4 4 4
K00512214
First Permanent OnlyTotal
Band Size 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 4 5 6 7 8 10 10 10 9 8 7 6 6 6 5 4 4 4 3 2 2 2 2 2 2
K00514
100 Band Assort. 2 2 2 4 4 4 6 7 10 10 10 10 8 6 6 4 2 2
K00148
134
100
Right and Left, Tube/Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 6 6 8 8 10 12 12 12 12 10 10 8 8 8 6 6 6 4 4 4 4 4 4 4 4
K00516180
49
ba
nds
www.rmortho.com
bandsTRUFORM BANDSMANDIBULAR FIRST MOLAR UNIVERSAL
Primary Plus First PermanentTotal
Band Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 2 2 2 2 2 2 2 2 3 4 5 6 7 8 9 9 9 9 9 8 7 5 5 4 4 3 3 2 2 2 2 2 2 2 2 2
K00550
• Design – anatomically shaped, designed to conform to buccal/lingual inclination – clinically determined functional fit with complete adaptation to tooth anatomy
• Size identification and Palmer notation are permanently marked to withstand heat sterilizationusing Electro-Scribe® marking process
• Complete size range – proportioned size range for use on primary molars and first permanent molars
• Lingual groove for orientation to tooth anatomy
• Developed through years of RM® Band Manufacturing.
• Dimensional strength to remain stable without deformation during trial fitting, with minimal separation.
• Withstands mastication and external appliance stress.
151
Right and Left, Tube/Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 4 4 4 4 4 4 4 4 4 4 6 8 8 10 12 12 12 12 12 10 8 6 6 6 6 4 4 4 4 4 4 4 4 4 4 4
K00552218
First Permanent OnlyTotal
Band Size 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 6 7 8 10 10 10 10 10 9 7 6 5 4 4 4 3 3 2 2 2 2 2 2 2 2
K00554
100 Band Assort. 2 2 2 4 4 4 6 8 10 10 10 10 8 6 6 4 2 2
K00149
132
100
Right and Left, Tube/Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36
Introductory Kit 8 8 10 12 12 12 12 12 12 8 8 6 6 6 4 4 4 4 4 4 4 4 4 4 4
K00556176
ba
nds
50 www.rmortho.com
bandsTRUFORM BANDSMAXILLARY/MANDIBULAR 2ND MOLAR RIGHT AND LEFT
Mandibular Second Molar Right and Left
Right and Left, Tube/Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Introductory Kit 4 4 4 4 6 8 8 10 12 12 12 12 12 10 8 6 6 6 6 4 4 4 4 4 4 4
K00564178
• Anatomically correct design – correctly proportioned for right and left configuration, providingpositive retention with minimum effort and adaptation. Lingual groove prepositioned
• Size identification and Palmer notation are permanently marked to withstand heat sterilizationusing the Electro-Scribe® marking process
• Anatomically Shaped – Adapts to the anatomy of the tooth accurately so that theocclusal/buccal surface is out of occlusion
• Developed through years of RM® Band Manufacturing.
• Dimensional strength to remain stable without deformation during trial fitting, with minimal separation.
• Withstands mastication and external appliance stress.
• Full complement of sizes – 26 size increments of true RMO® Temper
Maxillary Second Molar Right and Left
Permanent Only, Tube/Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Introductory Kit 4 4 4 4 4 6 6 8 8 10 12 12 12 12 10 8 8 8 8 6 6 4 4 4 4 4
K00522
• Anatomically correct design – correctly proportioned for right and left configuration, providingpositive retention with minimum effort and adaptation. Buccal groove prepositioned
• Size identification and Palmer notation are permanently marked to withstand heat sterilizationusing the Electro-Scribe® marking process
• Anatomically Shaped – Adapts to the anatomy of the tooth accurately so that theocclusal/buccal surface is out of occlusion
• Developed through years of RM® Band Manufacturing.
• Dimensional strength to remain stable without deformation during trial fitting, with minimal separation.
• Withstands mastication and external appliance stress.
• Full complement of sizes – 26 size increments of true RMO® Temper
180
51
ba
nds
www.rmortho.com
bandsTRUFORM BANDSMAXILLARY FIRST AND SECOND BICUSPID
Universal Bracket PlacementTotal
Band Size G G+ H H+ I I+ J J+ K K+ L L+ M M+ N N+
Introductory Kit K00329 2 3 4 5 7 10 13 16 17 15 13 10 7 4 3 2
• Functional anatomical shape – Adapts quickly, accurately to tooth anatomy.Gingival festoon eliminates tissue impingement
• Complete size selection – Choice of correct size for maximum retention at desired position
• Size identification – Color coded black with letter for size selections and maxillary identification.
• RM® engineered ductility and precise form adapts to the tooth contours with secure retention.
130
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size G G+ H H+ I I+ J J+ K K+ L L+ M M+ N N+
Introductory Kit K00330 4 4 6 8 10 12 16 20 22 18 16 12 8 6 4 4 170
ba
nds
52 www.rmortho.com
bandsTRUFORM BANDSMANDIBULAR FIRST AND SECOND BICUSPID
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
Introductory Kit K00334 4 4 4 4 6 6 6 6 6 8 8 10 12 12 12 10 10 8 6 6 4 4 4 4 4 4 4 176
Universal Bracket PlacementTotal
Band Size 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
Introductory Kit K00333 2 2 2 3 4 4 4 4 5 6 7 8 9 9 9 8 7 6 5 4 3 2 2 2 2 2 2
Universal Bracket PlacementTotal
Band Size F F+ G G+ H H+ I I+ J J+ K K+ L L+ M M+
Introductory Kit K00331 2 3 6 8 9 11 12 13 10 7 5 3 2 2 2 2
Mandibular First Bicuspid
• Anatomical Design – RM® engineered ductility and precise form adapts to the tooth contourswith secure retention. Festooned gingival.
• Correct Band Width – Secure anchorage is provided without extending too far gingivally
• Complete Size Range – Full complement of sizes to fit every tooth probability
• Size Identification – Color coded red with letter for selection and mandibular identification
97
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size F F+ G G+ H H+ I I+ J J+ K K+ L L+ M M+
Introductory Kit K00332 4 4 8 10 12 14 16 16 14 10 6 4 4 4 4 4 134
Mandibular Second Bicuspid
• Anatomical Design – RM® engineered temper and precise form adapts to the tooth contourswith secure retention. Festooned gingival. Apron contoured tightly to buccal surface withouthanging upon the mesial and distal angles.
• Correct Band Width – Secure anchorage is provided without extending too far gingivally
• Complete Size Range – Full complement of sizes to fit every tooth probability
• Size Identification – Color coded red with number for size selection and mandibularidentification
123
53
ba
nds
www.rmortho.com
bandsTRUFORM BANDSMAXILLARY CUSPIDS – APRON AND NON-APRON
Universal Bracket PlacementTotal
Band Size D D+ E E+ F F+ G G+ H H+ I I+ J J+
Introductory Kit K00313 2 3 4 6 9 11 13 13 11 8 5 4 3 3
Maxillary Cuspid Apron
Proper Design – Apron bands permit offset incisal placement of bracket.
• Apron contours tightly to labial surface without hanging up on the mesial and distal angles.
• Rolled gingival and incisal edges provide total retention and minimize cement margins.
• Specific incisal-gingival taper for maxillary canines with added ductility for superior fitting qualities.
• Complete Size Range – Clinically tested for maximum utilization
• Size Identification – Color coded black with letter for size selection and maxillary identification
• RM® engineered ductility and precise form adapts to the tooth contours with secure retention.
95
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size D D+ E E+ F F+ G G+ H H+ I I+ J J+
Introductory Kit K00314 4 4 6 8 12 14 16 16 14 10 8 6 4 4 126
Maxillary Cuspid Non-Apron
UniversalTotal
Band Size D D+ E E+ F F+ G G+ H H+ I I+ J J+
Introductory Kit K00315 2 3 4 6 9 11 13 13 11 8 5 4 3 3
• Non-Apron-Type Band — Correct incisal-gingival taper to minimize gingival flare. Rolled incisaland gingival edges conform to tooth anatomy.
• Material Ductility – Provides added qualities for seating and retention at desired position.
• Complete Size Range – Easy selection of proper size.
• Size Identification – Color coded black letters for size selection and maxillary identification.
• RM® engineered ductility and precise form adapts to the tooth contours with secure retention.
95
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size D D+ E E+ F F+ G G+ H H+ I I+ J J+
Introductory Kit K00316 4 4 6 8 12 14 16 16 14 10 8 6 4 4 126
ba
nds
54 www.rmortho.com
bandsTRUFORM BANDSMANDIBULAR CUSPIDS – APRON AND NON-APRON
Universal Bracket PlacementTotal
Band Size B B+ C C+ D D+ E E+ F F+ G G+ H H+
Introductory Kit K00317 2 2 3 7 11 12 14 14 11 8 5 2 2 2
Mandibular Cuspid Apron
• Proper Design – Apron bands permit offset incisal placement of bracket.
– Apron contours tightly to labial surface without hanging up on the mesial and distal angles.
– Rolled gingival and incisal edges provide total retention and minimize cement margins.
• Specific incisal-gingival taper for mandibular canines with added ductility for superior fitting qualities.
• Complete Size Range – Clinically tested for maximum utilization
• Size Identification – Color coded red with letter for size selection and mandibular identification
• RM® engineered ductility and precise form adapts to the tooth contours with secure retention.
95
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size B B+ C C+ D D+ E E+ F F+ G G+ H H+
Introductory Kit K00318 4 4 4 8 14 16 18 18 14 10 6 4 4 4 128
Mandibular Cuspid Non-Apron
Universal Bracket PlacementTotal
Band Size B B+ C C+ D D+ E E+ F F+ G G+ H H+
Introductory Kit K00319 2 2 3 7 11 12 14 14 11 8 5 2 2 2
• Correct incisal-gingival taper to minimize gingival flare. Rolled incisal and gingival edges con-form to tooth anatomy.
• Material Ductility – Provides added qualities for seating and retention at desired position.
• Complete Size Range – Easy selection of proper size.
• Size Identification – Color coded red with letter for size selection and mandibular identification
• RM® engineered ductility and precise form adapts to the tooth contours with secure retention.
95
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size B B+ C C+ D D+ E E+ F F+ G G+ H H+
Introductory Kit K00320 4 4 4 8 14 16 18 18 14 10 6 4 4 4 128
55
ba
nds
www.rmortho.com
bandsTRUFORM BANDSMAXILLARY LATERAL UNIVERSAL AND RIGHT AND LEFT
Maxillary Lateral – Right and Left
Universal Bracket PlacementTotal
Band Size C C+ D D+ E E+ F F+ G G+ H H+
Introductory Kit K00302 5 6 9 10 12 13 11 9 6 4 3 2
Maxillary Lateral Universal
• Design – Universal Shape – used interchangeably for right and left
• Proper Temper – Distinctive engineered ductility that allows the band to shape to the toothwhen seated to place
• Graduation of Sizes – Full complement of sizes to fit every tooth probability
• Size Identification – Color coded blue for size selection and maxillary lateral identification
90
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size C C+ D D+ E E+ F F+ G G+ H H+
Introductory Kit K00303 8 8 12 14 14 16 14 12 8 6 4 4 120
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size C C+ D D+ E E+ F F+ G G+ H H+
Introductory Kit K00304 8 8 12 14 14 16 14 12 8 6 4 4
• Design – Right and left anatomical shape for precise adaptation to maxillary lateral
• Proper Temper – Distinctive engineered ductility that allows the band to shape to the toothwhen seated to place
• Graduation of Sizes – Full complement of sizes to fit every tooth probability
• Palmer Notation Identification – The universally recognized Palmer Notation ID system makessize and right/left selection easy
• Size Identification – Color coded blue for size selection and maxillary lateral identification
120
ba
nds
56 www.rmortho.com
bandsTRUFORM BANDSMAXILLARY CENTRAL
Universal Bracket PlacementTotal
Band Size F F+ G G+ H H+ I I+ J J+ K K+ L L+ M M+ N N+
Introductory Kit K00300 2 3 5 8 10 12 14 11 8 7 5 3 3 2 2 2 2 2
Maxillary Central
• Functional Anatomical Design – Clinically developed, accurately manufactured.• Complete Size Range – consistant increment between sizes for fast, sure adaptation and
minimum inventory.
• Select RM® Unique Ductility – Tooth proportioned and contoured for ease in adaptation for maximum retention.
• Size Identification – Color coded black for size and selection and maxillary identification.
101
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size F F+ G G+ H H+ I I+ J J+ K K+ L L+ M M+ N N+
Introductory Kit K00301 4 4 8 10 14 16 18 14 10 10 6 4 4 4 4 4 4 4 142
57
ba
nds
www.rmortho.com
bandsTRUFORM BANDSMANDIBULAR CENTRAL AND LATERAL
Universal Bracket PlacementTotal
Band Size A A+ B B+ C C+ D D+ E E+ F F+
Introductory Kit K00305 10 14 21 22 20 17 12 8 4 2 2 2
Mandibular Central and Lateral
• Functional Anatomical Design – Clinically developed, accurately manufactured.• Complete Size Range – consistant increment between sizes for fast, sure adaptation and
minimum inventory.
• Select RM® Unique Ductility – Tooth proportioned and contoured for ease in adaptation for maximum retention.
• Size Identification – Color coded red for size and selection and mandibular identification.
134
Right and Left Bracket Placement, Equal Number of Rights and LeftsTotal
Band Size A A+ B B+ C C+ D D+ E E+ F F+
Introductory Kit K00306 12 18 28 28 26 22 16 10 6 4 4 4 178
ba
nds
58 www.rmortho.com
DISPENSING AND STORAGE SYSTEMS
Band TraysRMO® offers a complete band storage and chairside dispensing system which fits with the newElectro Scribe® permanent marking system.
Versatile, space-saving series of storage and dispensing units have been developed that arecapable of holding all RMO® bicuspid, cuspid and incisor bands.
Space Saving
Each of the formed compartments in the trays varies in size according to usage trends.
Inventory Organization
The two most popular sizes of any given band series (determined from analysis of usagetrends) will generally fall on the two largest compartments of the corresponding tray.
Versatile
Each printed tray format includes a formed tray and a clear, locking lid. Each tray has a labelthat indicates type of band, maxillary or mandibular.
Order PackageNumber Contains
Molar Band Tray
Max 1st Molar Universal J00750 1 each
Max 1st/2nd Molar Right J00750 1 each
Max 1st/2nd Molar Left J00750 1 each
Man 1st Molar Universal J00750 1 each
Man 1st/2nd Molar Right J00750 1 each
Man 1st/2nd Molar Left J00750 1 each
Anterior/Cuspid Band TrayMaxillary/Mandibular Anterior/Cuspid J00762 1 each
Bicuspid Band Tray
Maxillary 1st/2nd Bicuspid J00770 1 each
Mandibular 1st Bicuspid J00770 1 each
Mandibular 2nd Bicuspid J00771 1 each
bands
59
ba
nds
www.rmortho.com
bandsLINGUAL ATTACHMENTS
Order PackageNumber Contains
3D® TubeDesigned to accept lingual 3D® Fixed/Removable® Modular Orthodontics® (Wilson®) appli-ances.
Lingual Tube A04315 10
Lingual Tube with gingival hook A04314 10
Band Seating LugUsed to seat preformed bands. Furnished in 10-lug strips for easy welding to lingual.
Anterior A00717 100
Cuspid/Bicuspid A00718 100
Molar A00719 100
Lug/Cleat (Debnam)Used as band seating lug and mesial-distal elastic hook. Hook is bent out from band surfaceto engage elastics.
Cuspid/Bicuspid A00476 approx. 100
Molar A00720 approx. 100
EyeletsLarge, accepts wire and small diameter ligature thread
A00039 100
Lingual HookFlat weldable base with smooth ball end for placement on molars
A00297 10
Weldable Elastic HookWeldable hook for elastics
A00013 10
ba
nds
60 www.rmortho.com
PREWELD AUXILIARIES
Order PackageNumber Contains
Lingual ButtonExclusive round design allows any placement on band with minimum protrusion. Combinationhooks and band seating lug. Can be used any direction for easy engagement of elastics. Ultra-smooth finish for excellent patient comfort. Can be easily welded to stainless steel bands.
A00047 10
Weldable Buccal HooksFurnished in convenient straight strips. For easy attachment to band and bending into smallround buccal hook of desired shape.
A00117 100
Seating Lug/HookServes as lingual hook or molar hook for cross elastics and as a band seating and removing lugfor anteriors.
Anterior Base A00768 100
Cuspid/Bicuspid Molar Base A00767 100
bands
61
ba
nds
www.rmortho.com
bands
Angulation GuideOrders for angulated attachments will be positioned and angled per the standard technique ofthe specific attachment, unless otherwise specified.
Angulation shown on chart is for Standard Edgewise. Chart is shown as if facing the patient.
Position GuideThe weld positions illustrated are standard and will vary according to specific attachment andtechnique. They are subject to change as new and changing techniques introduce new variations.
Central and LateralPlacement Edgewise Bracket Light Wire Bracket
Mesial- centered centeredDisial
Occlusal- centered edge of bracketGingival even with gingival edge of band
CuspidPlacement Edgewise Bracket Light Wire Bracket Lingual Button Lingual Lug/Cleat
Mesial- Apron Non-Apron Apron Non-Apron Apron Non-Apron ApronDistal Centered Centered Centered Centered Centered Centered Centered
Occlusal- Offset to Offset to Offset to Offset to Offset toGingival Occlusal Occlusal Occlusal Occlusal Centered Centered Occlusal
+ Distal Root Tip
- Mesial Root Tip
BicuspidPlacement Maxillary/Mandibular 1st Mandibular 2nd Light Wire
Edgewise Bracket Edgewise Bracket Bracket Seating Lug/Hook Lingual Button Lingual Lug/Cleat
Mesial- Centered Centered Centered Centered Centered CenteredDistal
Occlusal- Centered Offset to Edge of bracket even with Offset to Offset toGingival Occlusal gingival edge of band Occlusal Centered Occlusal
PREWELD POSITION GUIDE
www.rmortho.com
ba
nds
3D® LingualTube (Wilson®) Lingual Arch Sheath Lingual Button Lug/Cleat
LINGUALPlacement
Mesial- Centered Centered Centered on mesial cusp Universal CenteredDistal R & L offset to distal
Occlusal- Occlusal edge of tube Centered Offset to Offset toGingival offset 1.0mm from Occlusal Occlusal
occlusal edge of band
Mandibular MolarSingle Buccal Tube Twin Tube Single Buccal Tube Single Buccal Tube
2nd Molar Gingival Placement
BUCCALPlacement
Mesial- R & L Mesial end of tube bisects R & L Mesial end of tube bisects R & L Mesial end of tube bisects R & L Mesial end of tube bisectsDistal mesial-buccal cusp mesial-buccal cusp mesial-buccal cusp mesial-buccal cusp
Occlusal- Arch Slot 2.0mm BELOW Arch Slot 2.0mm BELOW Arch Slot 2.0mm BELOW Tube even withGingival occlusal edge of band occlusal edge of band occlusal edge of band gingival edge of band
3D® LingualTube (Wilson®) Lingual Arch Sheath Lingual Button Molar Lug/Cleat
LINGUALPlacement
Mesial- Centered Centered Centered CenteredDistal
Occlusal- Occlusal edge of tube Centered Centered Offset toGingival offset 1.0mm from Occlusal
occlusal edge of band
Maxillary MolarSingle Buccal Tube Convertible Double Tube Convertible Double Tube/Bracket Triple Buccal Tube
BUCCALPlacement
Mesial- Mesial end of tube bisects Mesial end of tube bisects Mesial end of tube bisects Mesial end of tube bisectsDistal mesial-buccal cusp mesial-buccal cusp mesial-buccal cusp mesial-buccal cusp
Occlusal-Gingival Arch Slot for illustrations shown is 2.0mm ABOVE occlusal edge of band
Contur-Lok™ Bonding BasesPlacement Straight Preangulated Bracket Mini-Taurus Synergy VersaT Integra
Arch Slot Arch Slot Angulated on Base Preangulated Preangulated Preangulated Preangulated
Mesial- Centered Centered Centered Centered Centered Centered CenteredDistal
Occlusal- Centered Centered Centered Centered Centered Centered CenteredGingival
PREWELD POSITION GUIDEbands
62
fixedappliances
diagnosticsLIGHT WIRE STAINLESS STEEL OR PLASTIC
www.rmortho.com 65
diagnostics
fixedappliances
66 www.rmortho.com
fixe
da
pp
lianc
es
RMO® BRACKET TYPES AND DIMENSIONS
MAXILLARY
MANDIBULAR
right left
2nd
Bic
usp
id3.
15m
m
1st
Bic
usp
id3.
15 m
m
1st
Bic
usp
id2.
95 m
m
Cus
pid
2.95
mm
Late
ral
2.95
mm
Ce
ntra
l3.
6 m
m
Ce
ntra
l3.
6 m
m
Late
ral
3.15
mm
Cus
pid
3.15
mm
2nd
Bic
usp
id2.
95 m
m2n
d B
icus
pid
2.95
mm
1st
Bic
usp
id2.
95 m
m
Cus
pid
2.95
mm
Late
ral
2.33
mm
Ce
ntra
l2.
33 m
m
Ce
ntra
l2.
3mm
Late
ral
2.3
mm
Cus
pid
2.9
mm
1st
Bic
usp
id2.
9 m
m
2nd
Bic
usp
id2.
9mm
Synergy Mini-Taurus
Integra VersaT
Synergy®, VersaT™, Integra™ and Mini-Taurus® Bracket Dimensions Mesial-Distal
Standard Bracket Dimensions Mesio-Distal
1.3mm 1.9mm 2.5mm 2.0mm 3.0mm 4.1mm 4.5mmNarrow Medium Wide Narrow Medium Wide Extra WideSingle Single Single Twin Twin Twin Twin
Lang Bracket Lewis BracketAlexander Vari-Simplex Mini-Taurus®
Auxiliary Edgewise (Broussard®)
Vertical slot .018 x .046
fixedappliances
www.rmortho.com 67
fixed
ap
plia
nce
s
GINGIVALLY OFFSET BICUSPID BRACKETS
Early treatment clinicians using fixed appli-ance systems reported difficulty in bondingthe partially erupted 1st and 2nd bicuspidsusing conventional brackets. This situation cancause soft tissue impingement. (Please seeillustrations below.)
In 1992 RMO® introduced its first gingivally off-set upper bicuspid bracket in the BenchBioprogressive® system to help avoid soft tis-sue impingement. Early bracket placementhelps expedite the bicuspid’s full eruption.
The gingivally offset bracket option has provenvery successful and has been carried over toboth upper and lower bicuspids in many ofRMO®’s Synergy® series. The clinician is able tobond the bicuspids earlier. In doing so, the
tendency for the bicuspid brackets to end uptoo far occlusally is eliminated. The gingivallyoffset bracket (relative to the bonding base)also reduces interference and measurablydecreases bond failure.
Soft Tissue Soft Tissue Soft Tissue
Modified bracket, standard placement,
partially erupted.
Standard bracket,standard placement,
partially erupted.
Standard bracket,standard placement,
fully erupted.
Conventional placementof lower 2nd bicuspid.
These brackets are also available in the RMO Synergy® bracket design.
Gingivally offset lower2nd bicuspid.
Gingivally offset lowerbicuspid.
Conventional placementof lower 1st bicuspid.
LUXI II™
www.rmortho.com 69
fixed
ap
plia
nce
s
Ceramic brackets with the functionality of metal bracketsThese new improved brackets give yourpatients the look they want and give you thefunctionality you need. LUXI II™ gives youreduced friction for enhanced slidingmechanics and reduced treatment time,easy debonding, the aesthetics of ceramics,and the strength of metal all in one bracket.
Reduced FrictionLUXI II™ is a reduced-friction ceramic bracketcontaining a biocompatible gold arch slotsliding guide. This patent pending featureenhances sliding mechanics by reducingfriction as compared to conventional ceram-ics.
Mechanical Features• The LUXI II™ ceramic bracket is producedfrom extruded alumina. It is not a machinedbracket so that it will not fail prematurelyfrom cracking due to internal stress.
• LUXI II™ contains an 18-karat (75%) goldinsert, which is similar in composition to high-
quality gold crown and bridge alloys.
• Studies show that a greater torque can beapplied to a bracket with a gold insert beforethe bracket breaks, or a full-size wireengaged in the bracket twists, than for abracket with a stainless steel insert or an all-ceramic bracket.
Bonding / DebondingEasy bonding and debonding. LUXI II™’sbase has a new improved patented dovetaildesign that enhances bond strength whileallowing it to debond easily. Each basematches various tooth shapes. This gives theadhesive a large surface area – free of airpockets, so a sturdy, mechanical bond canform. This winning combination gives theability to use all chemical and light curebonding systems.
Patient AcceptanceThe unmatched combination of aestheticswith gold strength. The translucence ofceramic mirrors the natural look of enamel.This will be your patient’s first choice.
ALL NEW CERAMIC BRACKETS`
Ink colored identificationfor easy bonding
Rounded corners forpatient comfort
18 karat gold-lined slot forstrength, reduced friction,
accurate positioningLow underwing ligation
notches for easy ligation
New dovetail base for reliablemechanical retention throughout
treatment and reliable debonding
fixedappliances
70 www.rmortho.com
fixe
da
pp
lianc
es
LUXI II™ – GOLD-REINFORCED CERAMIC RMO® VERSION OFROTH PREADJUSTED STRAIGHT WIRE SYSTEM
maxillary brackets
.018 Arch Slot .022 Arch SlotAngulation Torque Rotation Width Right/LeftCentral
5° 12° 0° 3.8mm R Q03060 Q03080L Q03061 Q03081
Lateral9° 8° 0° 3.2mm R Q03062 Q03082
L Q03063 Q03083
Cuspid11° 0° -4° MO 3.2mm R Q03064 Q03084
With hook L Q03065 Q03085
First/Second Bicuspid0° -7° 0° 3.3mm R/L Q03066 Q03086
With hook
maxillary tubes
.018 Arch Slot .022 Arch SlotTubes Only/ Tubes Only/
Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On BandsFirst MolarTriple convertible with hook
0° -14° 14° 3.8mm .045 occlusal R A08604 A05654 A08624 A05674L A08605 A05655 A08625 A05675
Torque in base
First MolarDouble convertible with hook
0° -14° 14° 3.8mm .045 gingival R A08600 A05650 A08620 A05670L A08601 A05651 A08621 A05671
Torque in base
First MolarDouble convertible with hook
0° -14° 14° 4.6mm .045 occlusal R A08602 A05652 A08622 A05672L A08603 A05653 A08623 A05673
Torque in base
First Molar0° -14° 14° 3.8mm
Double convertible with hook R A08684 A05684 A08686 A05686L A08685 A05685 A08687 A05687
Double with hook without cap R A05688 A05690L A05689 A05691
Torque in base
Second MolarSingle with hook
0° -14° 14° 3.3mm R A08606 A05656 A08626 A05676L A08607 A05657 A08627 A05677
fixedappliances
www.rmortho.com 71
fixed
ap
plia
nce
s
LUXI II™ – GOLD-REINFORCED CERAMIC RMO® VERSION OFROTH PREADJUSTED STRAIGHT WIRE SYSTEM
mandibular tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Lip Bumper Right/Left On Bases On Bands On Bases On BandsFirst MolarTriple with hook
-1° -30° 4° 3.8mm .045 occlusal R A08610 A05660 A08630 A05680L A08611 A05661 A08631 A05681
Not preangulated. Torque in base.
First MolarDouble convertible with hook
-1° -30° 4° 3.8mm R A08608 A05658 A08628 A05678L A08609 A05659 A08629 A05679
Not preangulated. Torque in base.
Second MolarSingle with hook
-1° -30° -4° 3.3mm R A08612 A05662 A08632 A05682L A08613 A05663 A08633 A05683
Not preangulated.
mandibular brackets
.018 Arch Slot .022 Arch SlotAngulation Torque Rotation Width Right/LeftCentral/Lateral
0° 0° 0° 2.7mm R/L Q03070 Q03090
Cuspid5° -11° -2° MO 3.2mm R Q03071 Q03091
With hook L Q03072 Q03092
First Bicuspid0˚ -17˚ 0˚ 3.3mm
With hook R/L Q03073 Q03093
Second Bicuspid0˚ -22˚ 0˚ 3.3mm
With hook R/L Q03074 Q03094
KITS
Single Case, 12 brackets:
KQ03061 LUXI II™ Roth .018 hook on cuspid, 3-3 U/L
KQ03081 LUXI II™ Roth .022 hook on cuspid, 3-3 U/L
Single Case, 20 brackets:
KQ03065 LUXI II™ Roth .018 hook on cuspid/bicuspid, 5-5 U/L
KQ03085 LUXI II™ Roth .022 hook on cuspid/bicuspid, 5-5 U/L
Single Case, 6 brackets:
KQ03063 LUXI II™ Roth .018 hook on cuspid, 3-3 upper only
KQ03083 LUXI II™ Roth .022 hook on cuspid, 3-3 upper only
72 www.rmortho.com
fixe
da
pp
lianc
es
signature III™
NEW CERAMIC COLLECTION
Self-confidence for you and yourpatientsThe new redesigned Signature III™ ceramicbrackets preform as good as they look,almost invisible.
Patented arch slot and reducedfrictionSignature III™’s arch slots have a patent forstrength and consistency. Ceramic bracketsare inclined to fracture along the inside -right where the corners of the arch wire meetthe side of the bracket. Signature III™ elimi-nates these stress points by adding a round-ed protrusion to the center of each slot, whilemaintaining a continuous curve throughoutthe arch slot floor. This innovation drasticallyreduces bracket fracture, and reduces fric-tion by less contact with the wire.
New dovetail baseEasy bonding and debonding. SignatureIII™’s base has a new improved patenteddovetail design that enhances bond strengthwhile allowing it to debond easily. Eachbase matches various tooth shapes. Thisgives the adhesive a large surface area -free of air pockets, so a sturdy, mechanicalbond can form. This winning combinationgives the ability to use all chemical and lightcure bonding systems.
Low-stress, low-friction, slot floorSignature III™’s patented low-stress, low-fric-tion slot floor works equally well with round,rectangular and square arch wires. No mat-ter which arch wire you use, the Signature III™bracket properly places the center of forcewhich results in maximum control and mini-mum friction.
Ink colored identificationfor easy bonding
Smooth, rounded surfacesfor patient comfort
Torque in the base forlevel arch slot
Low underwing ligationnotches for easy ligation
New dovetail base for reliablemechanical retention throughout
treatment and reliable debonding
Patented arch slot protrusionreduces breakage and friciton
fixedappliances
www.rmortho.com 73
fixed
ap
plia
nce
s
SIGNATURE III™ CERAMIC RMO® VERSION OFROTH PREADJUSTED STRAIGHT WIRE SYSTEM
maxillary brackets.018 Arch Slot .022 Arch Slot
Angulation Torque Rotation Width Right/Left
Central5° 12° 0° 3.8mm R Q03010 Q03030
L Q03011 Q03031
Lateral9° 8° 0° 3.2mm R Q03012 Q03032
L Q03013 Q03033
Cuspid11° 0° -4° MO 3.2mm R Q03014 Q03034
With hook L Q03015 Q03035
First/Second Bicuspid0° -7° 0° 3.3mm R/L Q03016 Q03036
With hook
maxillary tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First MolarTriple convertible with hook
0° -14° 14° 3.8mm .045 occlusal R A08604 A05654 A08624 A05674L A08605 A05655 A08625 A05675
Torque in base
First MolarDouble convertible with hook
0° -14° 14° 3.8mm .045 gingival R A08600 A05650 A08620 A05670L A08601 A05651 A08621 A05671
Torque in base
First MolarDouble convertible with hook
0° -14° 14° 4.6mm .045 occlusal R A08602 A05652 A08622 A05672L A08603 A05653 A08623 A05673
Torque in base
First Molar0° -14° 14° 3.8mm
Double convertible with hook R A08684 A05684 A08686 A05686L A08685 A05685 A08687 A05687
Double with hook without cap R A05688 A05690L A05689 A05691
Torque in base
Second Molar
Single with hook
0° -14° 14° 3.3mm R A08606 A05656 A08626 A05676L A08607 A05657 A08627 A05677
fixedappliances
74 www.rmortho.com
fixe
da
pp
lianc
es
SIGNATURE III™ CERAMIC RMO® VERSION OFROTH PREADJUSTED STRAIGHT WIRE SYSTEM
mandibular tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Lip Bumper Right/Left On Bases On Bands On Bases On Bands
First MolarTriple with hook
-1° -30° 4° 3.8mm .045 occlusal R A08610 A05660 A08630 A05680L A08611 A05661 A08631 A05681
Not preangulated. Torque in base.
First MolarDouble convertible with hook
-1° -30° 4° 3.8mm R A08608 A05658 A08628 A05678L A08609 A05659 A08629 A05679
Not preangulated. Torque in base.
Second MolarSingle with hook
-1° -30° 4° 3.3mm R A08612 A05662 A08632 A05682L A08613 A05663 A08633 A05683
Not preangulated.
mandibular brackets.018 Arch Slot .022 Arch Slot
Angulation Torque Rotation Width Right/Left
Central/Lateral0° 0° 0° 2.7mm R/L Q03020 Q03040
Cuspid5° -11° -2° MO 3.2mm R Q03021 Q03041
With hook L Q03022 Q03042
First Bicuspid0˚ -17˚ 0˚ 3.3mm
With hook R/L Q03023 Q03043
Second Bicuspid0˚ -22˚ 0˚ 3.3mm
With hook R/L Q03024 Q03044
KITS
Single Case, 12 brackets:
KQ03011 Roth SIG .018, hook on cuspid, 3-3 U/L
KQ03031 Roth SIG .022, hook on cuspid, 3-3 UL
Single Case, 6 brackets:
KQ03013 Roth SIG .018,hook on cuspid, 3-3 U
KQ03033 Roth SIG .022, hook on cuspid, 3-3 U
Single Case, 20 brackets:
KQ03015 Roth SIG. .018, hook on cuspid/bicusid, 5-5 U/L
KQ03035 Roth SIG. .022,hook on cuspid/bicuspid, 5-5 U/L
fixedappliances
www.rmortho.com 75
fixed
ap
plia
nce
s
SIGNATURE III™ CERAMIC RICKETTS® ORIGINAL BIOPROGRESSIVE® SYSTEM
maxillary brackets .018 Arch Slot
Angulation Torque Width Right/Left On Bases
Central0° 22° 3.9mm R/L Q08000
Lateral9° 14° 3.4mm R Q08002
L Q08003
Cuspid5° 7° 3.3mm
Without hook R Q08004L Q08005
With hook R Q08006L Q08007
First/Second Bicuspid0° 0° 3.3mm
With hook R/L Q08020
maxillary tubes* .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands
First MolarTriple convertible with hook
0° 0° 15° 3.8mm .045 gingival R A08360 A04960L A08361 A04961
Auxiliary tube: 15° DOHeadgear tube: 15° DO
Second MolarSingle with hook
0° 0° 12° 3.3mm R A08382 A04982L A08383 A04983
*For more optional Bioprogressive® tubes, please refer to the Bioprogressive® tubes catalog section.
fixedappliances
76 www.rmortho.com
fixe
da
pp
lianc
es
SIGNATURE III™ CERAMIC RICKETTS® ORIGINAL BIOPROGRESSIVE® SYSTEM
mandibular brackets .018 Arch Slot
Angulation Torque Width Right/Left On Bases
Central/Lateral0° 0° 2.6mm R/L Q08010
Cuspid5° 7° 3.4mm
Without hook R Q08012L Q08013
With hook R Q08014L Q08015
First/Second Bicuspid0° 0° 3.3mm
With hook R/L Q08020
mandibular tubes* .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First MolarDouble convertible with hook
-5° -24° 12° 3.8mm R A08364 A04964L A08365 A04965
Preangulated. Torque in base.
First MolarDouble convertible with hook
-5° -24° 12° 3.8mm R A08386 A04986L A08387 A04987
Auxiliary tube: 0° angulation, 0° torque, 0° DOPreangulated. Torque in base.
Second MolarSingle with hook
-5° -34° 6° 3.3mm R A08390 A04990L A08391 A04991
Preangulated.
*For more optional Bioprogressive® tubes, please refer to the Bioprogressive® tubes catalog section.
KITS
Single Case, 12 brackets:
KQ08000 Sig. III Ricketts Original Bioprogressive .018, hook on cuspid 3-3 U/L
Single Case, 20 brackets:
KQ08001 Sig. III Ricketts Original Bioprogressive .018, hook on cuspid/bicuspid, 5-5 U/L
fixedappliances
www.rmortho.com 77
fixed
ap
plia
nce
s
SIGNATURE III™ CERAMIC RMO® BIOPROGRESSIVE® SYSTEM
maxillary brackets .018 Arch Slot
Angulation Torque Width Right/Left On Bases
Central0° 22° 3.9mm R/L Q08100
Lateral9° 14° 3.4mm R Q08102
L Q08103
Cuspid5° 7° 3.3mm
Without hook R Q08104L Q08105
With hook R Q08106L Q08107
First/Second Bicuspid0° -7° 3.3mm
With hook R/L Q08108
maxillary tubes* .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands
First MolarSingle with hook without cap
0° -10° 15° 3.8mm R A01192L A01193
Single convertible tube/bracket with hook0° -10° 15° 3.8mm R A08294 A01194
L A08295 A01195Torque in base.
First MolarDouble convertible with hook
0° -10° 15° 3.8mm R A08078 A01178L A08079 A01179
Auxiliary Tube: 0° torque, 0° DOTorque in base.
First MolarTriple convertible with hook
0° -10° 15° 3.8mm .045 occlusal R A08060 A01160L A08061 A01161
Auxiliary Tube: 0° torque, 0° DOHeadgear Tube: 0° distal offset. Torque in base.
Second MolarSingle with hook
0° -10° 12° 3.3mm R A08062 A01162L A08063 A01163
*For more optional Bioprogressive® tubes, please refer to the Bioprogressive® tubes catalog section.
fixedappliances
78 www.rmortho.com
fixe
da
pp
lianc
es
SIGNATURE III™ CERAMIC RMO® BIOPROGRESSIVE® SYSTEM
mandibular brackets .018 Arch Slot
Angulation Torque Width Right/Left On Bases
Central/Lateral0° 0° 2.6mm R/L Q08110
Cuspid5° 7° 3.4mm
Without hook R Q08112L Q08113
With hook R Q08114L Q08115
First Bicuspid0° -17° 3.4mm R/L Q08116
With hook
Second Bicuspid0° -22° 3.4mm R/L Q08118
With hook
mandibular tubes* .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First MolarSingle convertible tube/bracket with hook
-5° -27° 6° 3.8mm R A08298 A01198L A08299 A01199
Single with hook without cap-5° -27° 6° 3.8mm R A01196
Preangulated. Torque in base. L A01197
First MolarDouble convertible with hook
-5° -27° 6° 3.8mm R A08064 A01164L A08065 A01165
Auxiliary Tube: 0° angulation, 0° torque, 0° offsetPreangulated. Torque in base.
Second MolarSingle with hook
-5° -27° 6° 3.3mm R A08066 A01166Preangulated. L A08067 A01167Preangulated.
*For more optional Bioprogressive® tubes, please refer to the Bioprogressive® tubes catalog section.
KITS
Single Case, 12 brackets:KQ08100 Sig. III RMO Bioprogressive .018,
hook on cuspid 3-3 U/L
Single Case, 20 brackets:
KQ08101 Sig. III RMO Bioprogressive .018, hook on cuspid/bicuspid, 5-5 U/L
fixedappliances
www.rmortho.com 79
fixed
ap
plia
nce
s
SIGNATURE III™ CERAMIC STANDARD EDGEWISE SYSTEM
maxillary brackets.018 Arch Slot .022 Arch Slot
Angulation Torque Width Right/Left On Bases On Bases
Central0° 0° 3.9mm R/L Q09000 Q09020
Lateral0° 0° 3.3mm R/L Q09002 Q09022
Cuspid0° 0° 3.3mm
Without hook R/L Q09004 Q09024
Bicuspid0˚ 0˚ 3.3mm
Without hook R/L Q09006 Q09026
mandibular brackets.018 Arch Slot .022 Arch Slot
Angulation Torque Width Right/Left On Bases On Bases
Central/Lateral0° 0° 2.8mm R/L Q09008 Q09028
Cuspid0° 0° 3.3mm
Without hook R/L Q09004 Q09024
Bicuspid0˚ 0˚ 3.3mm
Without hook R/L Q09006 Q09026
KITS
Single Case, 12 brackets:
KQ09000 SIG III™ Standard Edgewise .018, 3-3 U/L
KQ09060 SIG III™ Standard Edgewise .022, 3-3 U/L
Single Case, 6 brackets:
KQ09041 SIG III™ Standard Edgewise .018, 3-3 U
KQ09061 SIG III™ Standard Edgewise .022, 3-3 U
Single Case, 20 brackets:
KQ09042 SIG III™ Standard Edgewise .018, 5-5 U/L
KQ09062 SIG III™ Standard Edgewise .022, 5-5 U/L
fixedappliances
80 www.rmortho.com
fixe
da
pp
lianc
es
DIRECT BONDING BASES
RMO® offers a large variety of choices forbonding brackets or tubes on a base in alltechniques. The number of offerings of brack-ets or tubes on anatomically shaped bases issignificantly increased. Brackets and tubesare brazed to a base using gold solder or sil-ver solder. These bases are RMO®’s Contur-Lok™. This section describes the availability ofbrackets and tubes on bases in the columnlabel “On Bases.”
Contur-Lok™ bases come in multiple sizes,including anatomical sizes with developmen-tal grooves. The bonding base is a laminateof stainless steel foil to an 80 x 80 mesh. Bothmesial-distal and occlusal-gingival contouringof the base assure maximum contact area forbonding. The mesh is oriented at 45˚, whichenhances its locking action.
• Contur-Lok™ bases provide optimum cover-age of the tooth over the entire “footprint” ofthe bracket or tube.
• Contur-Lok™ bases have compound curva-ture to fit mesial-distal and occlusal-gingivalmorphology of the tooth surface.
• Contur-Lok™ bases cover the tooth areaunder bracket wings, which can be food-traps,and protect them from plaque build-up.
• Contur-Lok™ provides a 45˚ orientation of themesh resulting in more mesh openings on thebase and increased tooth retention. Greatermechanical retention of adhesive to the baseoccurs due to the larger number of mesh openings.
• Contur-Lok™ is brazed to brackets or tubeswhich maintains the mesh intact, unlike weld-ing which destroys a portion of the mesh.
• Contur-Lok™ bases have a center indicatormark for fast, accurate bracket or tube positioning.
45° mesh for increasedlocking action
Laminated special stain-less steel foil mesh
Optimum tooth coverage
Compound contoured to better fitthe individual tooth morphology
Anatomical buccal groove
Center indicator mark
REDUCED-FRICTION APPLIANCEsynergy™
www.rmortho.com 81
fixed
ap
plia
nce
s
www.rmortho.com
The Synergy® bracket design is the most versa-tile, active bracket ever. It brings you moretreatment control options than conventionaledgewise brackets. It reduces friction dramati-cally and total treatment duration. All of thiscomes together in a very low profile patentedsynergy design.
• Synergy®’s new rounded arch slot wallsreduce binding and friction, giving a gentler,more continuous force. Treatment time isfaster and is comfortable to the patient.
• Synergy®’s new rounded arch slot floorreduces friction since the arch will contact thefloor at only two points.
• Synergy®’s new round arch slot walls andfloors allow tangential contact of the archwire, thus avoiding sharp binding as the archwire enters or exits through slot. It also increas-es the effective inter-bracket distance.
• The Synergy® bracket design offers ligation options never available before. (Available through RMO® only.)
• Minimum friction ligation
• Conventional ligation
• Maximum rotation ligation
• Minimal rotaton ligation
Synergy® is manufactured in the MetalInjection Molding process (MIM). The strongest,smoothest, most rounded appliances avail-able. Several university research studies haveshown the Synergy® bracket reduces frictiondramatically.
Available in the most popular techniques:
1. RMO®’s Version of Roth Straightwire System
2. Classic Bioprogressive® System (Ricketts®)
3. Original Standard Bioprogressive® System(Ricketts®)
4. Bench Bioprogressive® Preadjusted System
5. RMO®’s Trimorphic® Preadjusted System
6. RMO®’s Version of Level Anchorage (Root) System
7. Standard Edgewise System
8. Tri-Wing Broussard® System
Permanent Markings
With and WithoutIntegral Hook
Multiple Ligating Options
RoundedArch Slot Floor
Rounded Arch Slot Walls
fixedappliances
82 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGN RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
maxillary brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central5° 12° 3.6mm R M02300 M02400
L M02301 M02401
Lateral9° 8° 3.2mm
Without hook R M02302 M02402L M02303 M02403
With hook R M02316 M02416L M02317 M02417
Cuspid11° 0° -4°MO 3.2mm
Without hook R M02304 A02304 M02404 A02404L M02305 A02305 M02405 A02405
With hook R M02306 A02306 M02406 A02406L M02307 A02307 M02407 A02407
First/Second Bicuspid0° -7° 2°DO 3.2mm
Without hook R M02308 A02308 M02408 A02408L M02309 A02309 M02409 A02409
With hook R M02310 A02310 M02410 A02410L M02311 A02311 M02411 A02411
Gingivally Offset without hook R M02348 M02448L M02349 M02449
Gingivally Offset with hook R M02350 M02450L M02351 M02451
fixedappliances
www.rmortho.com 83
fixed
ap
plia
nce
s
SYNERGY® DESIGN RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
maxillary tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First MolarDouble convertible with hook
0° -14° 14° 3.8mm .045 gingival R A08600 A05650 A08620 A05670Torque in base L A08601 A05651 A08621 A05671
First MolarDouble convertible with ball hook
0° -14° 14° 4.6mm .045 occlusal R A08602 A05652 A08622 A05672Torque in base. L A08603 A05653 A08623 A05673
First MolarDouble convertible with hook
0° -14° 14° 3.8mm R A08684 A05684 A08686 A05686L A08685 A05685 A08687 A05687
Double with hook without cap0° -14° 14° 3.8mm R A05688 A05690
Torque in base L A05689 A05691
First MolarTriple convertible with hook
0° -14° 14° 3.8mm .045 occlusal R A08604 A05654 A08624 A05674Torque in base. L A08605 A05655 A08625 A05675
Second MolarSingle with hook
0° -14° 14° 3.3mm R A08606 A05656 A08626 A05676L A08607 A05657 A08627 A05677
fixedappliances
84 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGN RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
mandibular brackets .018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central2° -1° 2.2mm R M02320 M02420
L M02321 M02421
Lateral2° -1° 2.2mm
Without hook R M02322 M02422L M02323 M02423
With hook R M02338 M02438L M02339 M02439
Cuspid5° -11° -2°MO 3.2mm
Without hook R M02324 A02324 M02424 A02424L M02325 A02325 M02425 A02425
With hook R M02326 A02326 M02426 A02426L M02327 A02327 M02427 A02427
First Bicuspid0° -17° -4°DO 3.2mm
Without hook R M02328 A02328 M02428 A02428L M02329 A02329 M02429 A02429
With hook R M02330 A02330 M02430 A02430L M02331 A02331 M02431 A02431
Gingivally Offset without hook R M02368 M02468L M02369 M02469
Gingivally Offset with hook R M02370 M02470L M02371 M02471
Second Bicuspid0° -22° -4°DO 3.2mm
Without hook R M02332 A02332 M02432 A02432L M02333 A02333 M02433 A02433
With hook R M02334 A02334 M02434 A02434L M02335 A02335 M02435 A02435
Gingivally Offset without hook R M02372 M02472L M02373 M02473
Gingivally Offset with hook R M02374 M02474L M02375 M02475
fixedappliances
www.rmortho.com 85
fixed
ap
plia
nce
s
SYNERGY® DESIGN RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
mandibular tubes .018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Lip Bumper Right/Left On Bases On Bands On Bases On Bands
First MolarDouble convertible with hook
-1° -30° 4° 3.8mm R A08608 A05658 A08628 A05678Not preangulated. Torque in base. L A08609 A05659 A08629 A05679
First MolarTriple with hook
-1° -30° 4° 3.8mm .045 occlusal R A08610 A05660 A08630 A05680Not preangulated. Torque in base. L A08611 A05661 A08631 A05681
Second MolarSingle with hook
-1° -30° 4° 3.3mm R A08612 A05662 A08632 A05682Not preangulated. L A08613 A05663 A08633 A05683
KITSSingle Case, 20 brackets:
KM02300 Roth SYN .018 without hook, 5-5
KM02301 Roth SYN .018 hook on cuspid, 5-5
KM02302 Roth SYN .018 hook on cuspid/bicuspid, 5-5
Single Case, 20 brackets:
KM02400 Roth SYN .022 without hook, 5-5
KM02401 Roth SYN .022 hook on cuspid, 5-5
KM02402 Roth SYN .022 hook on cuspid/bicuspid, 5-5
fixedappliances
86 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGN RMO VERSION OF RICKETTS® CLASSIC BIOPROGRESSIVE® SYSTEM
maxillary brackets .0185 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands
Central3° 22° 3.6mm R M02600
L M02601
Lateral10° 14° 3.2mm R M02602
L M02603
Cuspid8° 7° 3.2mm
Without hook R M02604L M02605
With hook R M02606L M02607
First Bicuspid0° 0° 3.2mm
Without hook R M02608 A02608L M02609 A02609
With hook R M02648 A02648L M02649 A02649
Gingivally Offset without hook R M02610L M02611
Gingivally Offset with hook R M02650L M02651
Second Bicuspid0° 0° 3.2mm
Without hook R M02612 A02612L M02613 A02613
With hook R M02652 A02652L M02653 A02653
Gingivally Offset without hook R M02614L M02615
Gingivally Offset with hook R M02654L M02655
fixedappliances
www.rmortho.com 87
fixed
ap
plia
nce
s
SYNERGY® DESIGN RMO VERSION OF RICKETTS® CLASSIC BIOPROGRESSIVE® SYSTEM
maxillary tubes* .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands
First MolarTriple convertible with hook
0° 0° 15° 3.8mm .045 gingival R A08360 A04960L A08361 A04961
Auxiliary tube: 15° DOHeadgear tube: 15° DO
Second MolarSingle with hook
0° 0° 12° 3.3mm R A08382 A04982L A08383 A04983
*For more optional Bioprogressive® tubes, please refer to the Bioprogressive® tubes catalog section.
fixedappliances
88 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGN RMO VERSION OF RICKETTS® CLASSIC BIOPROGRESSIVE® SYSTEM
www.rmortho.com
mandibular brackets .0185 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands
Central/Lateral0° 0° 2.0mm R/L M02620
Cuspid2° 2° 3.2mm
Without hook R M02624L M02625
With hoo / center R M02626L M02627
First Bicuspid0° 0° 3.2mm
Without hook R M02628 A02628L M02629 A02629
With hook / center R M02658 A02658L M02659 A02659
Gingivally Offset without hook R M02630L M02631
Gingivally Offset with hook R M02660L M02661
Second Bicuspid0° -14° 3.2mm
Without hook R M02632 A02632L M02633 A02633
With hook / center R M02662 A02662L M02663 A02663
Gingivally Offset without hook R M02634L M02635
Gingivally Offset with hook R M02664L M02665
fixedappliances
www.rmortho.com 89
fixed
ap
plia
nce
s
SYNERGY® DESIGN RMO VERSION OF RICKETTS® CLASSIC BIOPROGRESSIVE® SYSTEM
mandibular tubes* .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First MolarDouble convertible with hook
-5° -24° 12° 3.8mm R A08364 A04964L A08365 A04965
Preangulated. Torque in base.
First MolarDouble convertible with hook
-5° -24° 12° 3.8mm R A08386 A04986L A08387 A04987
Auxiliary tube: 0° angulation, 0° torque, 0° DOPreangulated. Torque in base.
Second MolarSingle with hook
-5° -34° 6° 3.3mm R A08390 A04990L A08391 A04991
Preangulated.
*For more optional Bioprogressive® tubes, please refer to the Bioprogressive® tubes catalog section.
KITS
Single Case, 20 Brackets
KM02600 Ricketts® Classic SYN .0185 without hook, 5-5
KM02601 Ricketts® Classic SYN .0185 hook on cuspid, 5-5
KM02602 Ricketts® Classic SYN .0185 hook on cuspid/bicuspid, 5-5
fixedappliances
90 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGNRICKETTS®ORIGINAL STANDARD BIOPROGRESSIVE® SYSTEM
www.rmortho.com
maxillary brackets .0185 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands
Central0° 22° 3.6mm R M02800
L M02801
Lateral8° 14° 3.2mm R M02802
L M02803
Cuspid5° 7° 3.2mm
Without hook R M02804L M02805
First Bicuspid0° 0° 3.2mm
Without hook R M02808 A02808L M02809 A02809
With hook R M02848 A02848L M02849 A02849
Gingivally Offset without hook R M02810L M02811
Gingivally Offset with hook R M02850L M02851
Second Bicuspid0° 0° 3.2mm
Without hook R M02812 A02812L M02813 A02813
With hook R M02852 A02852L M02853 A02853
Gingivally Offset without hook R M02814L M02815
Gingivally Offset with hook R M02854L M02855
maxillary tubes .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands
First MolarTriple convertible with hook
0° 0° -15° 3.8mm .045 gingival R A08360 A04960L A08361 A04961
Auxiliary tube: 15° DOHeadgear tube: 15° DO
Second MolarSingle with hook
0° 0° -12° 3.3mm R A08382 A04982L A08383 A04983
*For more optional Bioprogressive® tubes, please refer to the Bioprogressive® tubes catalog section.
fixedappliances
www.rmortho.com 91
fixed
ap
plia
nce
s
SYNERGY® DESIGNRICKETTS® ORIGINAL STANDARD BIOPROGRESSIVE® SYSTEM
www.rmortho.com
mandibular brackets .0185 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands
Central/Lateral0° 0° 2.0mm R/L M02820
Cuspid5° 7° 3.2mm
Without hook R M02824L M02825
First Bicuspid0° 0° 3.2mm
Without hook R M02828 A02828L M02829 A02829
With hook R M02858 A02858L M02859 A02859
Gingivally Offset without hook R M02830L M02831
Gingivally Offset with hook R M02860L M02861
Second Bicuspid0° 0° 3.2mm
Without hook R M02832 A02832L M02833 A02833
With hook R M02862 A02862L M02863 A02863
Gingivally Offset with hook R M02864L M02865
Gingivally Offset without hook R M02834L M02835
mandibular tubes* .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First MolarDouble convertible with hook
-5° -24° -12° 3.8mm R A08364 A04964L A08365 A04965
Preangulated. Torque in base.
First MolarDouble convertible with hook
-5° -24° -12° 3.8mm R A08386 A04986L A08387 A04987
Auxiliary tube: 0° angulation, 0° torque, 0° DOPreangulated. Torque in base.
Second MolarSingle with hook
-5° -34° -6° 3.3mm R A08390 A04990L A08391 A04991
Preangulated.
KITS
Single Case, 20 Brackets KM02800 Ricketts® Original SY .0185 without hook, 5-5
fixedappliances
92 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGNBENCH BIOPROGRESSIVE® PREADJUSTED SYSTEM
www.rmortho.com
maxillary brackets .0185 Arch Slot
Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands
Central3° 17° 0° 3.6mm R M02700
L M02701
Lateral10° 11° 0° 3.2mm R M02702
L M02703
Cuspid8° 5° 0° 3.2mm
Without hook R M02704L M02705
With hook R M02706L M02707
First/Second Bicuspid0° -7° 2° DO 3.2mm
Without hook R M02708 A02708L M02709 A02709
With hook R M02710 A02710L M02711 A02711
Gingivally Offset without hook R M02748L M02749
Gingivally Offset with hook R M02750L M02751
fixedappliances
www.rmortho.com 93
fixed
ap
plia
nce
s
SYNERGY® DESIGNBENCH BIOPROGRESSIVE® PREADJUSTED SYSTEM
maxillary tubes .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands
First MolarSingle with hook without cap
0° -10° 15° 3.8mm R A01192L A01193
Single convertible tube/bracket with hook0° -10° 15° 3.8mm R A08294 A01194
L A08295 A01195Torque in base.
First MolarDouble convertible with hook
0° -10° 15° 3.8mm R A08078 A01178L A08079 A01179
Auxiliary Tube: 0° torque, 0° DOTorque in base.
First MolarTriple convertible with hook
0° -10° 15° 3.8mm .045 occlusal R A08060 A01160L A08061 A01161
Auxiliary Tube: 0° torque, 0° DOHeadgear Tube: 0° distal offset. Torque in base.
Second MolarSingle with hook
0° -10° 12° 3.3mm R A08062 A01162L A08063 A01163
fixedappliances
94 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGNBENCH BIOPROGRESSIVE® PREADJUSTED SYSTEM
www.rmortho.com
mandibular brackets .0185 Arch Slot
Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands
Central/Lateral2° -1° 0° 2.0mm R M02720
L M02721
Cuspid3° 3° 0° 3.2mm
Without hook R M02724L M02725
With hook R M02726L M02727
First Bicuspid0° -15° 0° 3.2mm
Without hook R M02728 A02728L M02729 A02729
With hook R M02730 A02730L M02731 A02731
Gingivally Offset without hook R M02768L M02769
Gingivally Offset with hook R M02770L M02771
Second Bicuspid0° -22° 4° DO 3.2mm
Without hook R M02732 A02732L M02733 A02733
With hook R M02734 A02734L M02735 A02735
Gingivally Offset without hook R M02772L M02773
Gingivally Offset with hook R M02774L M02775
fixedappliances
www.rmortho.com 95
fixed
ap
plia
nce
s
SYNERGY® DESIGNBENCH BIOPROGRESSIVE® PREADJUSTED SYSTEM
mandibular tubes .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First MolarSingle convertible tube/bracket with hook
-5° -27° 6° 3.8mm R A08298 A01198L A08299 A01199
Single with hook without cap-5° -27° 6° 3.8mm R A01196
Preangulated. Torque in base. L A01197
First MolarDouble convertible with hook
-5° -27° 6° 3.8mm R A08064 A01164L A08065 A01165
Auxiliary Tube: 0° angulation, 0° torque, 0° offsetPreangulated. Torque in base.
Second MolarSingle with hook
-5° -27° 6° 3.3mm R A08066 A01166Preangulated. L A08067 A01167
KITS
Single Case, 20 Brackets
KM02700 Bench SYN .0185 without hook 5-5KM02701 Bench SYN .0185 hook on cuspid 5-5KM02702 Bench SYN .0185 hook on cuspid/bicuspid 5-5
fixedappliances
96 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGNTRIMORPHIC® BIOPROGRESSIVE® SYSTEM BRACHYFACIAL
maxillary brackets .0185 Arch Slot
Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands
Central3° 22° 3.6mm R M02228
L M02229
Lateral10° 14° 3.2mm R M02230
L M02231
Cuspid8° 5° 3.2mm
Without hook R M02232L M02233
With hook R M02234L M02235
First Bicuspid0° -6° -2° DO 3.2mm
Without hook R M02208 A02208L M02209 A02209
With hook R M02210 A02210L M02211 A02211
Second Bicuspid0° -6° 3.2mm
Without hook R/L M02212 A02212
With hook R/L M02213 A02213
maxillary tubes .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands
First MolarTriple convertible with hook
0° -10° 15° 3.8mm .045 occlusal R A08060 A01160L A08061 A01161
Auxiliary tube: 0° Torque 0° OffsetHeadgear tube: 0° OffsetTorque in base.
Second MolarSingle with hook
0° -10° 12° 3.3mm R A08062 A01162L A08063 A01163
fixedappliances
www.rmortho.com 97
fixed
ap
plia
nce
s
SYNERGY® DESIGNTRIMORPHIC® BIOPROGRESSIVE® SYSTEM BRACHYFACIAL
mandibular brackets.0185 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands
Central/Lateral0° 0° 2.0mm R/L M02215
Cuspid3° 3° 3.2mm
Without hook R M02236L M02237
With hook R M02238L M02239
First Bicuspid0° -15° 3.2mm
Without hook R/L M02220 A02220
With hook R/L M02221 A02221
Second Bicuspid0° -20° 3.2mm
Without hook R/L M02222 A02222
With hook R/L M02223 A02223
mandibular tubes.018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First MolarTwin with hook (Ricketts®)
-5° -22° 12° 3.8mm R A08114 A01032L A08115 A01033
Preangulated.
Second MolarSingle with hook
-5° -27° 6° 3.3mm R A08066 A01166L A08067 A01167
Preangulated.
KITS
Single Case, 20 Brackets
KM02220 Brachyfacial SYN .0185 without hook 5-5KM02221 Brachyfacial SYN .0185 hook on cuspid 5-5KM02222 Brachyfacial SYN .0185 hook on cuspid/bicuspid 5-5
fixedappliances
98 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGNTRIMORPHIC® BIOPROGRESSIVE® SYSTEM MESOFACIAL
maxillary brackets .0185 Arch Slot
Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands
Central3° 17° 3.6mm R M02224
L M02225
Lateral10° 11° 3.0mm R M02226
L M02227
Cuspid8° 0° 3.2mm
Without hook R M02204L M02205
With hook R M02206L M02207
First Bicuspid0° -6° -2° DO 3.2mm
Without hook R M02208 A02208L M02209 A02209
With hook R M02210 A02210L M02211 A02211
Second Bicuspid0° -6° 3.2mm
Without hook R/L M02212 A02212
With hook R/L M02213 A02213
maxillary tubes .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands
First MolarTriple convertible with hook
0° -10° 15° 3.8mm .045 occlusal R A08060 A01160L A08061 A01161
Headgear tube: 0° DOAuxiliary tube: 0° Torque 0° OffsetTorque in base.
Second MolarSingle with hook
0° -10° 12° 3.3mm R A08062 A01162L A08063 A01163
fixedappliances
www.rmortho.com 99
fixed
ap
plia
nce
s
SYNERGY® DESIGNTRIMORPIC® BIOPROGRESSIVE® SYSTEM MESOFACIAL
mandibular brackets .0185 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands
Central/Lateral0° 0° 2.0mm R/L M02215
Cuspid3° 0° 3.2mm
Without hook R M02216L M02217
With hook R M02218L M02219
First Bicuspid0° -15° 3.2mm
Without hook R/L M02220 A02220
With hook R/L M02221 A02221
Second Bicuspid0° -20° 3.2mm
Without hook R/L M02222 A02222
With hook R/L M02223 A02223
mandibular tubes .018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First MolarTwin with hook (Ricketts®)
-5° -22° 12° 3.8mm R A08114 A01032L A08115 A01033
Preangulated.
Second MolarSingle with hook
-5° -27° 6° 3.3mm R A08066 A01166L A08067 A01167
Preangulated.
KITS
Single Case, 20 Brackets
KM02210 Mesofacial SYN .0185 without hook 5-5KM02211 Mesofacial SYN .0185 hook on cuspid 5-5KM02212 Mesofacial SYN .0185 hook on cuspid/bicuspid 5-5
fixedappliances
100 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGNTRIMORPHIC® BIOPROGRESSIVE® SYSTEM DOLICHOFACIAL
maxillary brackets.0185 Arch Slot
Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands
Central3° 12° 3.6mm R M02200
L M02201
Lateral10° 8° 3.2mm R M02202
L M02203
Cuspid8° 0° 3.2mm
Without hook R M02204L M02205
With hook R M02206L M02207
First Bicuspid0° -6° -2° DO 3.2mm
Without hook R M02208 A02208L M02209 A02209
With hook R M02210 A02210L M02211 A02211
Second Bicuspid0° -6° 3.2mm
Without hook R/L M02212 A02212
With hook R/L M02213 A02213
maxillary tubes.018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands
First MolarTriple convertible with hook
0° -14° 14° 3.8mm .045 occlusal R A08604 A05654L A08605 A05655
Torque in base
Second MolarSingle with hook
0° -14° 14° 3.3mm R A08606 A05656L A08607 A05657
fixedappliances
www.rmortho.com 101
fixed
ap
plia
nce
s
SYNERGY® DESIGNTRIMORPHIC® BIOPROGRESSIVE® SYSTEM DOLICHOFACIAL
mandibular brackets.0185 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands
Central/Lateral0° 0° 2.0mm R/L M02215
Cuspid3° 0° 3.2mm
Without hook R M02216L M02217
With hook R M02218L M02219
First Bicuspid0° -15° 3.2mm
Without hook R/L M02220 A02220
With hook R/L M02221 A02221
Second Bicuspid0° -20° 3.2mm
Without hook R/L M02222 A02222
With hook R/L M02223 A02223
mandibular tubes.018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First MolarDouble convertible with hook
-5° -27° 6° 3.8mm R A08064 A01164L A08065 A01165
Auxiliary tube: 0° angulation, 0° torque, 0° offsetPreangulated. Torque in base.
Second MolarSingle with hook
-5° -34° 6° 3.3mm R A08390 A04990L A08391 A04991
Preangulated.
KITSingle Case, 20 Brackets
KM02200 Dolichofacial SYN .0185 without hook 5-5KM02201 Dolichofacial SYN .0185 hook on cuspid 5-5KM02202 Dolichofacial SYN .0185 hook on cuspid/bicuspid 5-5
fixedappliances
102 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGN RMO® VERSION OF THE LEVELANCHORAGE TECHNIQUE PREADJUSTED SYSTEM
maxillary brackets.018 Arch Slot
Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands
Central3° 17° 3.6mm R M02500
L M02501
Lateral9° 8° 3.2mm R M02502
L M02503
Cuspid8° 0° 3.2mm
Without hook R M02504L M02505
First/Second Bicuspid0° -7° 2° DO 3.2mm
Without hook R M02508 A02508L M02509 A02509
Gingivally Offset without hook R M02536L M02537
Gingivally Offset without hook (small base) R M02518L M02519
mandibular brackets.018 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands
Central/Lateral2° -1° 2.0mm R M02520
L M02521
Cuspid3° 0° 3.2mm
Without hook R M02524L M02525
First/Second Bicuspid-5° -11° 3.2mm
Without hook R M02528 A02528L M02529 A02529
Gingivally Offset without hook R M02546L M02547
Gingivally Offset without hook (small base) R M02538L M02539
KITSSingle Case, 20 Brackets
KM02500 Level Anchorage SYN .018 without hook 5-5
fixedappliances
www.rmortho.com 103
fixed
ap
plia
nce
s
SYNERGY® DESIGNSTANDARD EDGEWISE BRACKET SYSTEM
maxillary brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Width Right/Left On Bases On Bands On Bases On Bands
Central0° 0° 3.6mm R/L M07600 M07620
Lateral0° 0° 3.2mm R/L M07601 M07621
Cuspid/Bicuspid0° 0° 3.2mm
Without hook R/L M07604 A07604 M07624 A07624
With hook R/L M07606 A07606 M07626 A07626
mandibular brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Width Right/Left On Bases On Bands On Bases On Bands
Central/Lateral0° 0° 2.0mm R/L M07610 M07630
Cuspid/Bicuspid0° 0° 3.2mm
Without hook R/L M07604 A07604 M07624 A07624
With hook R/L M07606 A07606 M07626 A07626
KITS
Single Case, 20 Brackets
KM07600 Standard Edgewise SYN .018 without hook 5-5KM07601 Standard Edgewise SYN .018 hook on cuspid 5-5KM07602 Standard Edgewise SYN .018 hook on cuspid/bicuspid 5-5
KM07620 Standard Edgewise SYN .022 without hook 5-5KM07621 Standard Edgewise SY N.022 hook on cuspid 5-5KM07622 Standard Edgewise SY N.022 hook on cuspid/bicuspid 5-5
fixedappliances
104 www.rmortho.com
fixe
da
pp
lianc
es
SYNERGY® DESIGNTRI-WING BROUSSARD® BRACKET SYSTEM
maxillary/mandibular brackets.018 x .025 Arch Slot/
Vertical Slot Size .018 x .020
Angulation Torque Width Right/Left On Bases
Without vertical slot0° 0° 2.4mm R/L M08000
With vertical slot0° 0° 2.4mm R/L M08100
maxillary/mandibular brackets.022 x .028 Arch Slot/
Vertical Slot Size .018 x .020
Angulation Torque Width Right/Left On Bases
Without vertical slot0° 0° 2.4mm R/L M08040
With vertical slot0° 0° 2.4mm R/L M08140
versaT™
THE MOST VERSATILE TWIN BRACKET APPLIANCE
www.rmortho.com 105
fixed
ap
plia
nce
s
Center scribe for easyplacement
Rounded slot walls
Permanentidentification
Rounded slotfoors
Low profile
Rounded surfaces forpatient comfort
Vertical slotMesh base for
superior bonding
RMO®’s newest bracket which incorporates thefriction reducing features of Synergy® but in theMini-Taurus® twin design. Additionally, includes avertical slot for auxiliary treatment applicationswhile maintaining a low profile.
After talking to our customers about their require-ments in bracket design we have developed anincredible new bracket. The Synergy® brackethas become the most popular selling RMO®
bracket. Many of our customers asked for thefeatures of Synergy® in a twin bracket. We lis-tened to our customers and developed the newVersaT™.
Bracket prescriptions are generic and do notaccommodate the individualized treatmentrequirements of each patient. VersaT™, byusing the vertical slot, allows the clinician toadjust the tip, torque, and rotation and managespace to fit the individualized treatment plan foreach patient.
VersaT™ has redesigned rounded arch slot walls,rounded arch slot floors and vertical slots.
Rounded arch slot walls increase arch wireeffectiveness dramatically by eliminating bind-ing and friction on arch wires; now they are freeto perform at their optimum.
The gently curving slot walls let the arch wireenter and exit the slot without binding or induc-ing unnecessary arch wire stress. Because thearch wire is not rigidly captured, as is the casewith conventional edgewise brackets, a gentlerand more continuous treatment force is gener-ated. Leveling at the beginning of treatment isaccomplished faster.
Torque, tip and rotational forces are all deliv-ered more gently due to the fact that the archwire touches the VersaT™ bracket at the apex ofthe rounded walls only. The line contactbetween bracket and arch wire effectivelyincreases inter-bracket distance for a moreactive, non-binding force.
Your patients will like the rounded arch slot fea-ture because it makes arch wire insertion easierand reduces discomfort between appointments.
fixedappliances
106 www.rmortho.com
fixe
da
pp
lianc
es
VERSAT™ AUXILIARIESFOR VERTICAL SLOT BRACKET SYSTEM
Order PackageNumber Contains
VersaT™ Universal Insert Pin A00600 100
• To prevent food debris or oral fluids from entering vertical slot
• Low profile gingival head with a 15˚ labial inclination
• Option to use gingival head as a hook for elastics or Energy Chain™
• Pin can be inserted or removed without affecting the archwire or ligature
VersaT™ Rotating Spring• Types: Medium, for most teeth
Short, for mandibular anterior teeth
• Medium and short differ in length of horizontal arm
• Each type available to rotate tooth in either a counter clockwise or clockwise direction whentooth is viewed from the occlusal surface
Type Direction of rotation Order PackageNumber Contains
Short Counter clockwise A00615 10Short Clockwise A00616 10Medium Counter clockwise A00617 10Medium Clockwise A00618 10
VersaT™ Uprighting Spring• To upright teeth mesial-distally
• Springs come in counter clockwise or clockwise direction of rotation
• Choose a spring based on viewing the tooth from the labial. Determine whether the directionof rotation to move the tooth into its correct postion is counter clockwise or clockwise.
Size Direction of Rotation Order PackageNumber Contains
.014” (.036mm) counter clockwise A00620 10
.014” (.036mm) clockwise A00621 10
medium short
fixedappliances
www.rmortho.com 107
fixed
ap
plia
nce
s
VERSAT™RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
maxillary brackets.018 Arch Slot .022 Arch Slot
Angulation Torque Rotation Width Right/Left On Bases On Bases
Central5° 12° 3.6mm R M03000 M03100
L M03001 M03101Lateral
9° 8° 2.9mm R M03002 M03102L M03003 M03103
Cuspid11° 0° 4° MO 2.9mm
Without hook R M03004 M03104L M03005 M03105
With hook R M03006 M03106L M03007 M03107
First/Second Bicuspid0° -7° 2° DO 2.9mm
Without hook R M03008 M03108L M03009 M03109
With hook R M03010 M03110L M03011 M03111
maxillary tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On BandsFirst MolarDouble convertible with hook.
0° -14° 14° 3.8mm .045 gingival R A08600 A05650 A08620 A05670L A08601 A05651 A08621 A05671
Torque in base.
First MolarDouble convertible with hook
0° -14° 14° 4.6mm .045 occlusal R A08602 A05652 A08622 A05672L A08603 A05653 A08623 A05673
Torque in base.
First MolarDouble convertible with hook.
0° -14° 14° 3.8mm R A08684 A05684 A08686 A05686L A08685 A05685 A08687 A05687
Double with hook without cap.0° -14° 14° 3.8mm R A05688 A05690
L A05689 A05691Torque in base.
First MolarTriple convertible with hook.
0° -14° 14° 3.8mm .045 occlusal R A08604 A05654 A08624 A05674L A08605 A05655 A08625 A05675
Torque in base.
Second MolarSingle with hook.
0° -14° 14° 3.3mm R A08606 A05656 A08626 A05676L A08607 A05657 A08627 A05677
fixedappliances
108 www.rmortho.com
fixe
da
pp
lianc
es
VERSAT™RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
mandibular brackets.018 Arch Slot .022 Arch Slot
Angulation Torque Rotation Width Right/Left On Bases On BasesCentral/Lateral
2° 0° 2.3mm R M03020 M03120L M03021 M03121
Cuspid5° -11° -2° MO 2.9mm
Without hook R M03024 M03124L M03025 M03125
With hook R M03026 M03126L M03027 M03127
First Bicuspid0° -17° 4° DO 2.9mm
Without hook R M03028 M03128L M03029 M03129
With hook R M03030 M03130L M03031 M03131
Second Bicuspid0° -22° 4° DO 2.9mm
Without hook R M03032 M03132L M03033 M03133
With hook R M03034 M03134L M03035 M03135
mandibular tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Lip Bumper Right/Left On Bases On Bands On Bases On BandsFirst MolarDouble convertible with hook.
-1° -30° 4° 3.8mm R A08608 A05658 A08628 A05678L A08609 A05659 A08629 A05679
Not preangulated. Torque in base.
First MolarTriple with hook
-1° -30° 4° 3.8mm .045 occlusal R A08610 A05660 A08630 A05680L A08611 A05661 A08631 A05681
Not preangulated. Torque in base.
Second MolarSingle with hook
-1° -30° 4° 3.3mm R A08612 A05662 A08632 A05682L A08613 A05663 A08633 A05683
Not preangulated
KITS
Single Case, 20 brackets:
KM03000 Roth VersaT™ .018 without hooks, 5-5
KM03001 Roth VersaT™ .018 hook on cuspid, 5-5
KM03002 Roth VersaT™ .018 hook on cuspid/bicuspid, 5-5
Single Case, 20 brackets:
KM03100 Roth VersaT™ .022 without hooks, 5-5
KM03101 Roth VersaT™ .022 hook on cuspid, 5-5
KM03102 Roth VersaT™ .022 hook on cuspid/bicuspid, 5-5
minitaurus
www.rmortho.com 109
fixed
ap
plia
nce
s
RMO® Mini-Taurus®, is a minimum bracket withmaximum advantages.
Mini-Taurus® offers enhanced bracket qualitywith smooth, rounded contours and roundedhooks. These features assure patient comfort,hygiene and structural strength.
The incisal-gingival bracket dimension hasbeen dramatically reduced. The twin brackettie wings are of sufficient size to allow easy lig-ating of single wing or across both wings.Strength in design prevents collapse or break-age from mastication. Bracket design mini-mizes interference between upper and lowerarches. The mesial-distal width permits preciserotation and tipping control.
Foil mesh bases match each bracket andtooth individually. This allows for the smallestbase possible while maintaining sufficient areafor bonding. A new center scribe featureassists proper alignment during bonding.Torque is provided in the base.
An easy-to-use permanent identification sys-tem is molded into each bracket.
Available in the most popular techniques:
1. RMO® Version Roth Preadjusted StraightWire System
2. RMO® Version of the Andrews Preadjusted Straight Wire System
3. Bench Bioprogressive® Preadjusted System
4. RMO® Version of Alexander Vari-SimplexSystem
5. Standard Edgewise System
Metal injection molded –Advanced sintered technology
ensures high quality uniformexacting profiles.
Built-in anti-rotation whereapplicable.
Torque, angulation and in/out isbuilt into the base.
Short, rounded hooks at no extracharge.
Permanent identificationsystem.Each bracket has a permanent
identifier and ink mark.
Base contours – designed foreach tooth type.
Alignment System
Bracket and base center scribe align precise-ly with the long axis of the clinical crown
Arch slot is parallelwith the occlusal
plane
fixedappliances
110 www.rmortho.com
fixe
da
pp
lianc
es
MINI-TAURUS® DESIGN RMO® VERSION OF ANDREWS PREADJUSTED STRAIGHT WIRE SYSTEM
maxillary brackets
.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central5° 7° 3.6mm R M01400 M01420
L M01401 M01421Optional
5° 12° 3.6mm R M01406 M01430L M01407 M01431
Lateral9° 3° 2.9mm
Without hook R M01402 M01422L M01403 M01423
With hook (distal) R M01404 M01424L M01405 M01425
Optional9° 8° 2.9mm
Without hook R M01408 M01432L M01409 M01433
With hook R M01410 M01434L M01411 M01435
Cuspid11° -7° 4° MO 2.9mm
Without hook R M01412 M01436L M01413 M01437
With hook (distal) R M01414 M01438L M01415 M01439
First Bicuspid0° -7° 2° DO 2.9mm
Without hook R M01416 A06200 M01440 A06600L M01417 A06201 M01441 A06601
With hook (mesial) R M01418 A06202 M01442 A06602L M01419 A06203 M01443 A06603
Second Bicuspid0° -7° 2° DO 2.9mm
Without hook R M01426 A06200 M01444 A06600L M01427 A06201 M01445 A06601
With hook (mesial) R M01428 A06202 M01446 A06602L M01429 A06203 M01447 A06603
fixedappliances
www.rmortho.com 111
fixed
ap
plia
nce
s
MINI-TAURUS® DESIGN RMO® VERSION OF ANDREWS PREADJUSTED STRAIGHT WIRE SYSTEM
maxillary tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First MolarDouble convertible with hook
5° -9° 10° 3.8mm .045 gingival R A08400 A06100 A08440 A06140L A08401 A06101 A08441 A06141
Optional0° -9° 10° 3.8mm .045 gingival R A08402 A06102 A08442 A06142
L A08403 A06103 A08443 A06143Headgear tube: 0° offset. Not preangulated. Torque in base.
First MolarDouble convertible with hook
5° -9° 10° 3.8mm .045 occlusal R A08404 A06104 A08444 A06144L A08405 A06105 A08445 A06145
Optional0° -9° 10° 3.8mm .045 occlusal R A08406 A06106 A08446 A06146
L A08407 A06107 A08447 A06147Headgear tube: 0° offset. Not preangulated. Torque in base.
Second MolarSingle with hook
5° -9° 10° 3.3mm R A08408 A06108 A08448 A06148L A08409 A06109 A08449 A06149
Optional0° -9° 10° 3.3mm R A08410 A06110 A08450 A06150
L A08411 A06111 A08451 A06151Not preangulated.
fixedappliances
112 www.rmortho.com
fixe
da
pp
lianc
es
MINI-TAURUS® DESIGN RMO® VERSION OF ANDREWS PREADJUSTED STRAIGHT WIRE SYSTEM
mandibular brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central2° -1° 2.3mm R M01450 M01470
L M01451 M01471
Lateral2° -1° 2.3mm
Without hook R M01452 M01472L M01453 M01473
With hook R M01454 M01474L M01455 M01475
Cuspid5° -11° 2° MO 2.9mm
Without hook R M01456 M01476L M01457 M01477
With hook R M01458 M01478L M01459 M01479
First Bicuspid0° -17° -4° DO 2.9mm
Without hook R M01460 A06204 M01480 A06604L M01461 A06205 M01481 A06605
With hook R M01462 A06206 M01482 A06606L M01463 A06207 M01483 A06607
Second Bicuspid0° -22° -4° DO 2.9mm
Without hook R M01464 A06208 M01484 A06608L M01465 A06209 M01485 A06609
With hook R M01466 A06210 M01486 A06610L M01467 A06211 M01487 A06611
fixedappliances
www.rmortho.com 113
fixed
ap
plia
nce
s
MINI-TAURUS® DESIGN RMO® VERSION OF ANDREWS PREADJUSTED STRAIGHT WIRE SYSTEM
mandibular tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Lip Bumper Right/Left On Bases On Bands On Bases On Bands
First MolarSingle convertible with hook
2° -30° 0° 3.8mm R A08420 A06120 A08460 A06160L A08421 A06121 A08461 A06161
Not preangulated. Torque in base.
First MolarDouble convertible with hook
-1° -30° 4° 3.8mm R A08608 A05658 A08628 A05678L A08609 A05659 A08629 A05679
Not preangulated. Torque in base.
First MolarTriple with hook .045 occlusal
-1° -30° 4° 3.8mm R A08610 A05660 A08630 A05680L A08611 A05661 A08631 A05681
Not preangulated. Torque in base.
Second MolarSingle with hook
2° -35° 0° 3.3mm R A08426 A06126 A08466 A06166Not preangulated. L A08427 A06127 A08467 A06167
Second MolarSingle with hook
-1° -30° 4° 3.3mm R A08612 A05662 A08632 A05682Not preangulated. L A08613 A05663 A08633 A05683
KITSSingle Case, 20 BracketsKM01400 Andrews MT .018 without hook 5-5KM01401 Andrews MT .018 hook on cuspid 5-5KM01402 Andrews MT .018 hook on cuspid/bicuspid 5-5
KM01420 Andrews MT .022 without hook 5-5KM01421 Andrews MT .022 hook on cuspid 5-5KM01422 Andrews MT .022 hook on cuspid/bicuspid 5-5
fixedappliances
114 www.rmortho.com
fixe
da
pp
lianc
es
MINI-TAURUS® DESIGN RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
www.rmortho.com
maxillary brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central5° 12° 3.6mm R M01000 M01100
L M01001 M01101
Lateral9° 8° 2.9mm
Without hook R M01002 M01102L M01003 M01103
With hook (distal) R M01016 M01116L M01017 M01117
Cuspid11° 0° -4° MO 2.9mm
Without hook R M01004 M01104L M01005 M01105
With hook (distal) R M01006 M01106L M01007 M01107
First Bicuspid0° -7° -2° DO 2.9mm
Without hook R M01008 A06408 M01108 A06508L M01009 A06409 M01109 A06509
With hook (mesial) R M01010 A06410 M01110 A06510L M01011 A06411 M01111 A06511
Gingivally Offset without hook R M01050 M01150L M01051 M01151
Gingivally Offset with hook R M01052 M01152L M01053 M01153
Second Bicuspid0° -7° -2° DO 2.9mm
Without hook R M01012 A06408 M01112 A06508L M01013 A06409 M01113 A06509
With hook (mesial) R M01014 A06410 M01114 A06510L M01015 A06411 M01115 A06511
Gingivally Offset without hook R M01054 M01154L M01055 M01155
Gingivally Offset with hook R M01056 M01156L M01057 M01157
fixedappliances
www.rmortho.com 115
fixed
ap
plia
nce
s
MINI-TAURUS® DESIGN RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
maxillary tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First MolarDouble convertible with hook.
0° -14° 14° 3.8mm .045 gingival R A08600 A05650 A08620 A05670L A08601 A05651 A08621 A05671
Torque in base.
First MolarDouble convertible with hook
0° -14° 14° 4.6mm .045 occlusal R A08602 A05652 A08622 A05672L A08603 A05653 A08623 A05673
Torque in base.
First MolarDouble convertible with hook.
0° -14° 14° 3.8mm R A08684 A05684 A08686 A05686L A08685 A05685 A08687 A05687
Double with hook without cap.0° -14° 14° 3.8mm R A05688 A05690
L A05689 A05691Torque in base.
First MolarTriple convertible with hook.
0° -14° 14° 3.8mm .045 occlusal R A08604 A05654 A08624 A05674L A08605 A05655 A08625 A05675
Torque in base.
Second MolarSingle with hook.
0° -14° 14° 3.3mm R A08606 A05656 A08626 A05676L A08607 A05657 A08627 A05677
fixedappliances
116 www.rmortho.com
fixe
da
pp
lianc
es
MINI-TAURUS® DESIGN RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
www.rmortho.com
mandibular brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central2° -1° 2.3mm R M01020 M01120
L M01021 M01121
Lateral2° -1° 2.3mm
Without hook R M01022 M01122L M01023 M01123
With hook (distal) R M01038 M01138L M01039 M01139
Cuspid5° -11° -2° MO 2.9mm
Without hook R M01024 M01124L M01025 M01125
With hook (distal) R M01026 M01126L M01027 M01127
First Bicuspid0° -17° 4° DO 2.9mm
Without hook R M01028 A06428 M01128 A06528L M01029 A06429 M01129 A06529
With hook (distal) R M01030 A06430 M01130 A06530L M01031 A06431 M01131 A06531
Gingivally Offset without hook R M01058 M01150L M01059 M01151
Gingivally Offset with hook R M01060 M01160L M01061 M01161
Second Bicuspid0° -22° -4° DO 2.9mm
Without hook R M01032 A06432 M01132 A06532L M01033 A06433 M01133 A06533
With hook (distal) R M01034 A06434 M01134 A06534L M01035 A06435 M01135 A06535
Gingivally Offset without hook R M01062 M01162L M01063 M01163
Gingivally Offset with hook R M01064 M01164L M01065 M01165
fixedappliances
www.rmortho.com 117
fixed
ap
plia
nce
s
MINI-TAURUS® DESIGN RMO® VERSION OF ROTH PREADJUSTED STRAIGHT WIRE SYSTEM
mandibular tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Lip Bumper Right/Left On Bases On Bands On Bases On Bands
First MolarDouble convertible with hook.
-1° -30° 4° 3.8mm R A08608 A05658 A08628 A05678L A08609 A05659 A08629 A05679
Not preangulated. Torque in base.
First MolarTriple with hook
-1° -30° 4° 3.8mm .045 occlusal R A08610 A05660 A08630 A05680L A08611 A05661 A08631 A05681
Not preangulated Torque in base. .
Second MolarSingle with hook
-1° -30° 4° 3.3mm R A08612 A05662 A08632 A05682L A08613 A05663 A08633 A05683
Not preangulated.
KITSSingle Case, 20 Brackets
KM01000 Roth MT .018 without hook 5-5KM01001 Roth MT .018 hook on cuspid 5-5KM01002 Roth MT .018 hook on cuspid/bicuspid 5-5
KM01100 Roth MT .022 without hook 5-5KM01101 Roth MT .022 hook on cuspid 5-5KM01102 Roth MT .022 hook on cuspid/bicuspid 5-5
fixedappliances
118 www.rmortho.com
fixe
da
pp
lianc
es
www.rmortho.com
MINI-TAURUS® DESIGN RMO® VERSION OF MBT
maxillary brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central5° 17° 3.6mm R M03600 M03700
L M03601 M03701
Lateral9° 8° 2.9mm
Without hook R M03602 M03702L M03603 M03703
Cuspid11° -7° -4° MO 2.9mm
Without hook R M03604 M03704L M03605 M03705
With hook R M03606 M03706L M03607 M03707
11˚ 0˚ -4˚MO 2.9mmWith hook (extraction cases) R M03608 M03708
L M03609 M03709
First / Second Bicuspid0° -7° 2° DO 2.9mm
Without hook R M03610 A03610 M03710 A03710L M03611 A03611 M03711 A03711
With hook R M03612 A03612 M03712 A03712L M03613 A03613 M03713 A03713
Gingivally Offset without hook R M03650 M03750L M03651 M03751
Gingivally Offset with hook R M03652 M03752L M03653 M03753
fixedappliances
www.rmortho.com 119
fixed
ap
plia
nce
s
maxillary tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First MolarDouble convertible with hook.
0° -14° 14° 3.8mm .045 gingival R A08500 A05000 A08508 A05100L A08501 A05001 A08509 A05101
Torque in base.
Second MolarSingle with hook.
0° -14° 14° 3.3mm R A08502 A05002 A08510 A05102L A08503 A05003 A08511 A05103
Torque in base.
OptionalFirst Molar
0° -9° 10° 3.3mm .045 gingival R A08504 A05004 A08512 A05104L A08505 A05005 A08513 A05106
Torque in base.
Second Molar0˚ -9˚ 10˚ 3.3mm R A08506 A05006 A08514 A05106
L A08507 A05007 A08515 A05107Torque in base.
MINI-TAURUS® DESIGN RMO® VERSION OF MBT
fixedappliances
120 www.rmortho.com
fixe
da
pp
lianc
es
www.rmortho.com
MINI-TAURUS® DESIGN RMO® VERSION OF MBT
mandibular brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central/Lateral0° -6° 2.2mm R/L M03620 M03720
Cuspid5° -11° -2° MO 2.9mm
Without hook R M03622 M03722L M03623 M03723
With hook R M03624 M03724L M03625 M03725
First Bicuspid0° -11° 4° DO 2.9mm
Without hook R M03626 A03626 M03726 A03726L M03627 A03627 M03727 A03727
With hook R M03628 A03628 M03728 A03728L M03629 A03629 M03729 A03729
Gingivally Offset without hook R M03654 M03754L M03655 M03753
Gingivally Offset with hook R M03656 M03756L M03657 M03757
Second Bicuspid0° -17° 4° DO 2.9mm
Without hook R M03630 A03630 M03730 A03730L M03631 A03631 M03731 A03731
With hook R M03632 A03632 M03732 A03732L M03633 A03633 M03733 A03733
Gingivally Offset without hook R M03658 M03758L M03659 M03759
Gingivally Offset with hook R M03660 M03760L M03661 M03761
fixedappliances
www.rmortho.com 121
fixed
ap
plia
nce
s
KITSSingle Case, 20 brackets, .018 arch slot:
KM03600 MBT Mini Taurus .018, 5-5
KM03601 MBT Mini Taurus .018, hook on cuspid, 5-5
KM03602 MBT Mini Taurus .018, hook on cuspid/bicuspid, 5-5
Single Case, 20 brackets, .022 arch slot:
KM03700 Roth SYN .022 without hook, 5-5
KM03701 MBT Mini Taurus .018, hook on cuspid, 5-5
KM03702 MBT Mini Taurus .018, hook on cuspid/bicuspid, 5-5
MINI-TAURUS® DESIGN RMO® VERSION OF MBT
Mandibular Tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First MolarSingle convertible with hook
0° -22° 5° 3.8mm R A08516 A05008 A08520 A05108L A08517 A05009 A08521 A05109
Second MolarSingle with hook.
0˚ -10˚ 6˚ 3.3mm R A08518 A05010 A08522 A05110L A08519 A05011 A08523 A05111
fixedappliances
122 www.rmortho.com
fixe
da
pp
lianc
es
www.rmortho.com
MINI-TAURUS® DESIGN RMO® VERSION OF BENCH BIOPROGRESSIVE® PREADJUSTED
maxillary brackets.0185 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central5° 17° 3.6mm R M01200 M01300
L M01201 M01301
Lateral9° 10° 2.9mm R M01202 M01302
L M01203 M01303
Cuspid without vertical slot9° 7° -4° MO 2.9mm
Without hook R M01204 M01304L M01205 M01305
With hook (mesial) R M01206 M01306L M01207 M01307
Cuspid with vertical slot, (.018 x .020)9° 7° -4° MO 2.9mm
Without hook R M01216 M01316L M01217 M01317
With hook (mesial) R M01218 M01318L M01219 M01319
First Bicuspid0° -7° -2° DO 2.9mm
Without hook R M01208 A06808 M01308 A06908L M01209 A06809 M01309 A06909
With hook (mesial) R M01210 A06810 M01310 A06910L M01211 A06811 M01311 A06911
Gingivally Offset without hook R M01248 M01348L M01249 M01349
Gingivally Offset with hook R M01250 M01350L M01251 M01351
Second Bicuspid0° -7° -2° DO 2.9mm
Without hook R M01212 A06808 M01312 A06908L M01213 A06809 M01313 A06909
With hook (mesial) R M01214 A06810 M01314 A06910L M01215 A06811 M01315 A06911
Gingivally Offset without hook R M01252 M01352L M01253 M01353
Gingivally Offset with hook R M01254 M01354L M01255 M01355
fixedappliances
www.rmortho.com 123
fixed
ap
plia
nce
s
MINI-TAURUS® DESIGN RMO® VERSION OF BENCH BIOPROGRESSIVE® PREADJUSTED
maxillary tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First MolarSingle with hook without cap
0° -10° 15° 3.8mm R A01192 A01292L A01193 A01293
Single convertible tube/bracket with hook0° -10° 15° 3.8mm R A08294 A01194 A08494 A01294
L A08295 A01195 A08495 A01295Torque in base.
First MolarDouble convertible with hook
0° -10° 15° 3.8mm R A08078 A01178 A08080 A01180L A08079 A01179 A08081 A01181
Auxiliary tube: 0° Torque 0° OffsetTorque in base.
First MolarTriple convertible with hook
0° -10° 15° 3.8mm .045 occlusal R A08060 A01160 A08070 A01170L A08061 A01161 A08071 A01171
Headgear: 0° Offset Aux. Tube: 0° Torque, 0° OffsetTorque in base.
Second MolarSingle with hook
0° -10° 12° 3.3mm R A08062 A01162 A08072 A01172L A08063 A01163 A08073 A01173
fixedappliances
124 www.rmortho.com
fixe
da
pp
lianc
es
MINI-TAURUS® DESIGN RMO® VERSION OF BENCH BIOPROGRESSIVE® PREADJUSTED SYSTEM
mandibular brackets.0185 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Rotation Width Right/Left On Bases On Bands On Bases On Bands
Central2° -1° 2.3mm R M01220 M01320
L M01221 M01321
Lateral2° -1° 2.3mm R M01222 M01322
L M01223 M01323
Cuspid without vertical slot5° 7° -2° MO 2.9mm
Without hook R M01224 M01324L M01225 M01325
With hook (distal) R M01226 M01326L M01227 M01327
Cuspid with vertical slot, (.018 x .020)5° 7° -2° MO 2.9mm
Without hook R M01240 M01340L M01241 M01341
With hook (distal) R M01242 M01342L M01243 M01343
First Bicuspid0° -11° 4° DO 2.9mm
Without hook R M01228 A06828 M01328 A06928L M01229 A06829 M01329 A06929
With hook (distal) R M01230 A06830 M01330 A06930L M01231 A06831 M01331 A06931
Second Bicuspid0° -22° 4° DO 2.9mm
Without hook R M01232 A06832 M01332 A06932L M01233 A06833 M01333 A06933
With hook (distal) R M01234 A06834 M01334 A06934L M01235 A06835 M01335 A06935
fixedappliances
www.rmortho.com 125
fixed
ap
plia
nce
s
MINI-TAURUS® DESIGN RMO® VERSION OF BENCH BIOPROGRESSIVE® PREADJUSTED SYSTEM
mandibular tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands On Bases On Bands
First MolarSingle convertible with hook
-5° -27° 6° 3.8mm R A08298 A01198L A08299 A01199
Single with hook without cap-5° -27° 6° 3.8mm R A01196
L A01197Preangulated. Torque in base.
First MolarDouble convertible with hook
-5° -27° 6° 3.8mm R A08064 A01164 A08074 A01174L A08065 A01165 A08075 A01175
Auxiliary tube: 0° Torque, 0° Offset, 0°Angulation.Preangulated. Torque in base.
Second MolarSingle with hook
-5° -27° 6° 3.3mm R A08066 A01166 A08076 A01176L A08067 A01167 A08077 A01177
Preangulated.
KITSSingle Case, 20 Brackets
KM01200 Bench MT .018 without hook 5-5KM01201 Bench MT .018 hook on cuspid 5-5KM01202 Bench MT .018 hook on cuspid/bicuspid 5-5
KM01300 Bench MT .022 without hook 5-5KM01301 Bench MT .022 hook on cuspid 5-5KM01302 Bench MT .022 hook on cuspid/bicuspid 5-5
fixedappliances
126 www.rmortho.com
fixe
da
pp
lianc
es
MINI-TAURUS® DESIGN RMO® VERSION OF ALEXANDER VARI-SIMPLEX SYSTEM (WITH VERTICAL SLOT .018 X .020)
maxillary brackets.018 Arch Slot .022 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands On Bases On Bands
Central5° 14° 3.6mm R M01600 M01650
L M01601 M01651
Lateral8° 7° 2.9mm
Without hook R M01602 M01652L M01603 M01653
With hook (distal) R M01604 M01654L M01605 M01655
Cuspid (Rotation-Lang)10° -3° 6.1mm
Without hook R M01606 A01606 M01656 A01656L M01607 A01607 M01657 A01657
With hook R M01608 A01608 M01658 A01658L M01609 A01609 M01659 A01659
First Bicuspid (Rotation-Lewis)0° -7° 5.1mm
Without hook R M01610 A01610 M01660 A01660L M01611 A01611 M01661 A01661
Second Bicuspid (Rotation-Lewis)0° -7° 5.1mm
Without hook R M01614 A01614 M01664 A01664L M01615 A01615 M01665 A01665
maxillary tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First MolarDouble convertible with hook.
0° -10° 15° 3.8mm .045 occlusal R A08180 A04380 A08190 A04390L A08181 A04381 A08191 A04391
Torque in base.Headgear tube 0° offset.
Second MolarSingle with hook
0° -10° 6° 3.3mm R A08182 A04382 A08192 A04392L A08183 A04383 A08193 A04393
Must be weldedat RMO
fixedappliances
www.rmortho.com 127
fixed
ap
plia
nce
s
MINI-TAURUS® DESIGN RMO® VERSION OF ALEXANDER VARI-SIMPLEX SYSTEM (WITH VERTICAL SLOT .018 X .020)
mandibular brackets.018 Arch Slot .022 Arch Slot
Bracket Only/Angulation Torque Width Right/Left On Bases On Bands On Bases On Bands
Central (Rotation-Lewis)0° -5° 4.5mm R M01620 A01620 M01670 A01670
L M01621 A01621 M01671 A01671
Lateral (Lewis)0° -5° 4.5mm
Without hook R M01622 A01622 M01672 A01672L M01623 A01623 M01673 A01673
With hook (distal) R M01624 A01624 M01674 A01674L M01625 A01625 M01675 A01675
Cuspid (Rotation-Lang)6° -7° 6.1mm
Without hook R M01626 A01626 M01676 A01676L M01627 A01627 M01677 A01677
With hook R M01628 A01628 M01678 A01678L M01629 A01629 M01679 A01679
First Bicuspid (Rotation-Lewis)0° -11° 5.1mm
Without hook R M01630 A01630 M01680 A01680L M01631 A01631 M01681 A01681
Second Bicuspid (Rotation-Lewis)0° -17° 5.1mm
Without hook R M01634 A01634 M01684 A01684L M01635 A01635 M01685 A01685
Gingivally Offset without hook R M01644 M01194L M01045 M01195
mandibular tubes.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/
Angulation Torque Distal Offset Width Right/Left On Bases On Bands On Bases On Bands
First MolarSingle convertible with hook.
-6° -22° 5° 3.8mm R A08184 A04384 A08194 A04394L A08185 A04385 A08195 A04395
Not preangulated.
Second MolarSingle with hook
-6° -27° 6° 3.3mm R A08186 A04386 A08196 A04396L A08187 A04387 A08197 A04397
Not preangulated.
KITSSingle Case, 20 Brackets
KM01600 Alexander MT .018 without hook 5-5KM01601 Alexander MT .018 hook on cuspid 5-5
KM01650 Alexander MT .022 without hook 5-5KM01651 Alexander MT .022 hook on cuspid 5-5
Must be weldedat RMO
fixedappliances
128 www.rmortho.com
fixe
da
pp
lianc
es
MINI-TAURUS® DESIGN STANDARD EDGEWISE SYSTEM
maxillary brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Width Right/Left On Bases On Bands On Bases On Bands
Central0° 0° 3.6mm R/L M01900 A01900 M01910 A01910
Lateral0° 0° 2.9mm R/L M01901 A01901 M01911 A01911
Cuspid/Bicuspid0° 0° 2.9mm
Without hook R/L M01902 A01902 M01912 A01912
With hook (distal) R M01904 A01904 M01914 A01914L M01905 A01905 M01915 A01915
mandibular brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Width Right/Left On Bases On Bands On Bases On Bands
Central/Lateral0° 0° 2.3mm R/L M01906 A01906 M01916 A01916
Cuspid/Bicuspid0° 0° 2.9mm
Without hook R/L M01907 A01902 M01917 A01912
With hook (distal) R M01908 A01908 M01918 A01918L M01909 A01909 M01919 A01919
KITSSingle Case, 20 Brackets
KM01900 Standard edgewise MT .018 without hook 5-5KM01901 Standard edgewise MT .018 hook on cuspid 5-5KM01902 Standard edgewise MT .018 hook on cuspid/bicuspid 5-5
KM01910 Standard edgewise MT .022 without hook 5-5KM01911 Standard edgewise MT .022 hook on cuspid 5-5KM01912 Standard edgewise MT .022 hook on cuspid/bicuspid 5-5
www.rmortho.com 129
fixed
ap
plia
nce
s
integra™
THE INTEGRAL BRACKET APPLIANCE SYSTEM
RMO® is introducing a new low profile bracketappliance system called Integra™. This small,rhomboid designed bracket is totally integrat-ed. The complete bracket, including the base,is molded as one unit and is manufacturedusing metal injection molding (MIM). RMO®
pioneered the MIM manufacturing process inorthodontics and is the leader in the field.
The result of molding the bracket as one unitresults in a stronger integral appliance. Thebuilt-in wings, hooks and base result in preci-sion orthodontic control. The intregral ballhooks on cuspids and bicuspids allow for simul-taneous use of auxiliaries.
The increased, molded-pattern bonding sur-face area assures an excellent bond. The
molded base is designed to match precisely tothe curvature of the tooth morphology for max-imum contact and strong, consistent bonding.The vertical scribe line aligns precisely with thecrown long axis, simplifying accurate bracketplacement.
The wing design provides for easy ligation,which is unique in a low profile bracket.Integra™ has a permanent marking systemmolded into each bracket for easy identifica-tion.
The Integra™ bracket delivers an unbeatablecombination of superior function, patient com-fort and superb bonding in an integral appli-ance system. Quality and consistent finishingare the results.
Permanent identification
smooth surface forpatient comfort
Integral hook
tie wing - designedfor easy ligation
base contours designedto fit individual tooth
morphology
base designed to provideoptimal bond strength
center scribe to align precisely with thelong axis of the clinical crown
low profile for greatercomfort and less
impingement
fixedappliances
130 www.rmortho.com
fixe
da
pp
lianc
es
mandibular brackets.018 Arch Slot .022 Arch Slot
Angulation Torque Width Right/Left
Central/Lateral0° 0° 2.3mm R/L M09006 M09016
Cuspid/Bicuspid0° 0° 2.9mm
Without hook R/L M09002 M09012
With hook MDR/MXL M09005 M09015MDL/MXR M09004 M09014
KITSSingle Case, 20 Brackets
KM09000 Standard edgewise .018 without hook 5-5KM09001 Standard edgewise .018 hook on cuspid 5-5KM09002 Standard edgewise .018 hook on cuspid/bicuspid 5-5
KM09010 Standard edgewise .022 without hook 5-5KM09011 Standard edgewise .022 hook on cuspid 5-5KM09012 Standard edgewise .022 hook on cuspid/bicuspid 5-5
maxillary brackets.018 Arch Slot .022 Arch Slot
Angulation Torque Width Right/Left
Central0° 0° 3.6mm R/L M09000 M09010
Lateral0° 0° 2.9mm R/L M09001 M09011
Cuspid/Bicuspid0° 0° 2.9mm
Without hook R/L M09002 M09012
With hook MXR/MDL M09004 M09014MXL/MDR M09005 M09015
INTEGRA™ STANDARD EDGEWISE SYSTEM
grace®
www.rmortho.com 131
fixed
ap
plia
nce
s
GRACE® DESIGNPREADJUSTED LOW PROFILE EDGEWISE SYSTEM
The Grace® System is one of many benefits thatdeveloped from a wonderful 35-year relation-ship with the prestigious Japanese J. MoritaCompany, a leader in Japan and throughoutthe world. Thirty years ago, the Morita/RMO®
joint venture company, called the RockyMountain Morita Company (RMMC), was found-ed when the J. Morita Company becameRMO®’s exclusive dealer in Japan.
The friendship and the association withJapanese universities and orthodontic leadershave brought many ideas to our attention.RMO® recognized the Grace® System as animportant Bioprogressive® oriented advance-ment. RMO® focused its MIM (Metal InjectionMolding) technology on producing exactlywhat was required for this system, and we areproud of our part in this joint high technologyinternational effort.
This bracket/tube system is designed for prac-tices thatdesire maxi-mum precisemechanicalcontrolthroughouttreatment.
• The innov-ative char-acteristicof the Grace®
System bracketis the incorporateddesign for easy cut-ting of the tying wire.When you ligatethe arch wire inthe bracket firm-ly in the con-ventional manner,
enough space is secured automatically,which allows the tip of the ligature cutter tobe inserted in between the bracket wingsand the tying wires.
This innovative structure is incorporated inthe occlusal wings of the upper and the gin-gival wings of the lower brackets, whichresults in easy tying wire removal and lessenspatient discomfort.
• Another unique design feature of the Grace®
System tube is the incorporated “slant” at thedistal end, which automatically directs thecinched back wire to the tooth side, avoidingpossible damage to the buccal mucosa bythe arch wire.
The utility archwires can be used in first molartubes; both upper and lower are convertibletype.
• The Grace® System is equipped with out-standing structures for the utmost comfort ofthe patient and maximal efficiency of theoperator, with unique designs of the smallest
available size, low-profile, and roundshape produced by the RMO®’s high
technology MIM method.
Additionally, the brack-et wings are double
tapered, whichfurther inhibitsthe possibility offood trappingand plaque
attachment, andenhances easy
brushingaccess.
fixedappliances
132 www.rmortho.com
fixe
da
pp
lianc
es
GRACE® DESIGNPREADJUSTED LOW PROFILE EDGEWISE SYSTEM
maxillary brackets.018 Arch Slot
Angulation Torque Rotation Width Right/Left On Bases
Central5° 28° 3.6mm R M06040
L M06041
5° 18° R M06000L M06001
5° 8° R M06036L M06037
Lateral10° 20° 3.0mm R M06042
L M06043
10° 10° R M06002L M06003
10° 0° R M06038L M06039
Cuspid8° 7° -3° MO 3.0mm R M06006
With hook (distal) L M06007
First Bicuspid0° 0° 2° DO 3.0mm
Without hook R M06008L M06009
Second Bicuspid0° 0° 4° DO 3.0mm
Without hook R M06012L M06013
maxillary tubes.018 Arch Slot
Headgear Tubes Only/Angulation Torque Distal Offset Width Tube Right/Left On Bases On Bands
First MolarTriple Convertible with hook
0° 0° 14° 4.5mm .045 occlusal R A08700 A06700L A08701 A06701
Auxiliary Tube:0° Torque, 0° OffsetHeadgear Tube: 0° Offset
Second MolarSingle with hook
0° 0° 15° 3.3mm R A08702 A06702L A08703 A06703
Heavy
Medium
Reverse
Heavy
Medium
Reverse
fixedappliances
www.rmortho.com 133
fixed
ap
plia
nce
s
GRACE® DESIGNPREADJUSTED LOW PROFILE EDGEWISE SYSTEM
mandibular brackets.018 Arch Slot
Angulation Torque Rotation Width Right/Left On Bases
Central/Lateral0° 0° 2.3mm R M06020
L M06021
Cuspid8° 0° -3° MO 3.0mm R M06026
With hook (distal) L M06027
First Bicuspid0° -7° 2° DO 3.0mm
Without hook R M06028L M06029
Second Bicuspid0° -15° 4° DO 3.0mm
Without hook R M06032L M06033
mandibular tubes.018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First MolarDouble convertible with hook
-5° -22° 4° 4.0mm R A08720 A06720L A08721 A06721
Auxiliary Tube: -22° Torque, 4° Offset.Preangulated. Torque in base.
Second MolarSingle with hook
-5° -30° 5° 3.3mm R A08722 A06722L A08723 A06723
Preangulated.
machinemilled
www.rmortho.com 135
fixed
ap
plia
nce
s
RMO® offers the very best combination—alaminated stainless steel foil-mesh base joinedto its family of precision milled, burr-freebrackets. The result: the ultimate direct bond-ing bracket system, which gives you greatercontrol of treatment and less bonding failure.
The machine milled brackets are milled frombars of stainless steel for total precision, espe-cially arch slot precision; ease of ligation byproviding a larger ligating area than conven-tional wing designs with no increase in overallsize or impairment of the strength of thebracket; smooth edges which provide patient
comfort; and ink colored arch identification(black for upper, red for lower). The bracket isthen brazed with gold alloy (corrosion resistant)to RMO® Contur-Lok® bonding bases.
RMO® offers a wide variety of machine milledbrackets in single, twin wings and in medium,wide and extra wide (mesial and distal) in thefollowing techniques: Standard EdgewiseSystem .018 and .022 arch slots, OriginalStandard Bioprogressive® System (Ricketts®).0185 x .030, Dimension 4® Bioprogressive®
System (Ricketts®) .0185 x .030 and AuxiliaryEdgewise System (Broussard®).
Ink colored arch identification
Gold alloy brazed to brackets
Optimum coverage ofthe tooth
Smooth edges forpatient comfort
Center indicator mark
Compound contoured to better fitwith tooth morphologyLaminated special stainless steel foil-mesh
Precision milled, burr-free arch slot
fixedappliances
136 www.rmortho.com
fixe
da
pp
lianc
es
ORIGINAL STANDARD BIOPROGRESSIVE® SYSTEM (RICKETTS®)
maxillary bracketsStraight Arch Slot Preangulated Arch Slot
.0185 x .030 arch slot .0185 x .030 arch slot
Bracket Only/ Bracket Only/Angulation Torque Width Right/Left On Bases On Bands Right/Left On Bases On Bands
Central0° 22°
Wide 4.1mm R/L A05203 A00069 R/L A05203 A00069
Lateral8° 14°
Medium 3.0mm R/L A05204 A00213 R A05230 A02000L A05231 A02001
Wide 4.1mm R/L A05205 A00214 R A05232 A02002L A05233 A02003
Cuspid5° 7°
Medium 3.2mm R/L A05209 A00468 R A05236 A02006L A05237 A02007
Wide 4.3mm R/L A05210 A00469 R A02008L A02009
First/Second Bicuspid0° 0°
Medium 3.2mm R/L A05211 A00996 R/L A05211 A00996
Wide 4.3mm R/L A05212 A00997 R/L A05212 A00997
.018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First Molar (Bracket)0° 0° 15° 3.8mm R/L A01008 A01008
fixedappliances
www.rmortho.com 137
fixed
ap
plia
nce
s
ORIGINAL STANDARD BIOPROGRESSIVE® SYSTEM (RICKETTS®)
mandibular bracketsStraight Arch Slot Preangulated Arch Slot
.0185 x .030 arch slot .0185 x .030 arch slot
Bracket Only/ Bracket Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands Right/Left On Bases On Bands
Central/Lateral0° 0°
Single 1.9mm R/L A05214 A00062 R/L A05214 A00062
Medium – Twin 3.0mm R/L A05200 A00066 R/L A05200 A00066
Cuspid5° 7°
Medium 3.2mm R/L A05220 A00468 R A05242 A02020L A05243 A02021
Wide 4.3mm R/L A05221 A00469 R A02022L A02023
First Bicuspid0° 0°
Medium 3.2mm R/L A05228 A00996 R/L A05228 A00996
Wide 4.3mm R/L A05229 A00997 R/L A05229 A00997
Second Bicuspid0° -14°
Medium 3.2mm R/L A05216 A01034 R/L A05216 A01034
Wide 4.3mm R/L A01035 R/L A01035
.018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First Molar (Bracket)-5° -22° 12° 3.8mm R A01036 A01036
L A01037 A01037Not preangulated.
fixedappliances
138 www.rmortho.com
fixe
da
pp
lianc
es
DIMENSION 4® BIOPROGRESSIVE® SYSTEM (RICKETTS®)
maxillary bracketsStraight Arch Slot Preangulated Arch Slot
.0185 arch slot .0185 arch slot
Bracket Only/ Bracket Only/Angulation Torque Width Right/Left On Bases On Bands Right/Left On Bases On Bands
Central0° 22°
Wide 4.1mm R/L A05203 A00069 R/L A05203 A00069
Lateral8° 14°
Medium 3.0mm R/L A05204 A00213 R A05230 A02000L A05231 A02001
Wide 4.1mm R/L A05205 A00214 R A05232 A02002L A05233 A02003
Cuspid5° 7°
Medium 3.2mm R/L A05260 A02060 R A05274 A02074L A05275 A02075
Wide 4.3mm R/L A05261 A02061 R A02076L A02077
First/Second Bicuspid (extraction)0° 0°
Medium 3.2mm R/L A05262 A02062 R/L A05262 A02062
Wide 4.3mm R/L A05263 A02063 R/L A05263 A02063
*Second Bicuspid (non-extraction)0° 0°
Medium 3.2mm R/L A05264 A02064 R/L A05264 A02064
Wide 4.3mm R/L A02065 R/L A02065
*This second bicuspid bracket has an arch slot from base measurement of 1.2mm which will be used in the non-extraction cases only.
.018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First Molar (Bracket)0° 0° 15° 3.8mm R/L A01008 A01008
fixedappliances
www.rmortho.com 139
fixed
ap
plia
nce
s
DIMENSION 4® BIOPROGRESSIVE® SYSTEM (RICKETTS®)
mandibular bracketsStraight Arch Slot Preangulated Arch Slot
.0185 arch slot .0185 arch slot
Bracket Only/ Bracket Only/Angulation Torque Width Right/Left On Bases On Bands Right/Left On Bases On Bands
Central/Lateral0° 0°
Medium – Single 1.9mm R/L A05266 A02066 R/L A05266 A02066
Medium – Twin 3.0mm R/L A05267 A02067 R/L A05267 A02067
Cuspid5° 7°
Medium 3.2mm R/L A05268 A02068 R A05278 A02078L A05279 A02079
Wide 4.3mm R/L A02069
First/Second Bicuspid (extraction)0° -7°
Medium 3.2mm R/L A05282 A02082 R/L A05282 A02082
Wide 4.3mm R/L A02083 R/L A02083
First Bicuspid (non-extraction)0° 0°
Medium 3.2mm R/L A05270 A02070 R/L A05270 A02070
Wide 4.3mm R/L A02071 R/L A02071
*Second Bicuspid (non-extraction)0° -14°
Medium 3.2mm R/L A05272 A02072 R/L A05272 A02072
Wide 4.3mm R/L A05273 A02073 R/L A05273 A02073
*This second bicuspid bracket has an arch slot from base measurement of 1.2mm which will be used in the non-extraction cases only.
.018 Arch Slot
Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands
First Molar (Bracket)-5° -22° 12° 3.8mm R A01036 A01036
L A01037 A01037
fixedappliances
140 www.rmortho.com
fixe
da
pp
lianc
es
STANDARD EDGEWISE SYSTEM
maxillary/mandibular brackets.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Width On Bases On Bands On Bases On Bands
Anterior Single0° 0°
Narrow 1.3mm A05090 A00050 A05092 A00001
Medium 1.9mm A05094 A01071 A05095 A01073
Wide 2.5mm A05091 A00051 A05093 A00002
Anterior Twin0° 0°
Narrow 2.0mm A05047 A00053 A05046 A00215
Medium 3.0mm A05000 A00054 A05020 A00216
Wide 4.1mm A05007 A00055 A05028 A00217
Extra Wide 4.5mm A05034 A00077 A05014 A00075
Cuspid/Bicuspid Single0° 0°
Medium 1.9mm A05094 A01072 A05095 A01074
Cuspid/Bicuspid Twin0° 0°
Medium 3.2mm A05005 A00220 A05024 A00218
Wide 4.3mm A05012 A00221 A05032 A00219
fixedappliances
www.rmortho.com 141
fixed
ap
plia
nce
s
AUXILIARY EDGEWISE (BROUSSARD®) “TWO FORCE” SYSTEM(WITH VERTICAL SLOT .018 X .046)
maxillary/mandibular.018 Arch Slot .022 Arch Slot
Bracket Only/ Bracket Only/Angulation Torque Width Height On Bases On Bands On Bases On Bands
Anterior Single0° 0°
Narrow 1.9mm 1.5mm A05051 A00133 A05071 A00134
Wide 2.5mm A05075 A00131
Cuspid/Bicuspid Single0° 0°
Narrow 1.9mm 1.5mm A05073 A00497
Cuspid/Bicuspid Single0° 0°
Wide 2.5mm 1.5mm A05057 A05076 A00495
Anterior Twin0° 0°
Medium 3.0mm 1.6mm A05050 A00490 A05064 A00491
Cuspid/Bicuspid Twin0° 0°
Medium 3.1mm 1.6mm A05062 A00345 A05079 A00346
Anterior Twin0° 0°
Wide 3.9mm 1.6mm A05086 A00492 A05081 A00493
Cuspid/Bicuspid Twin0° 0°
Wide 4.0mm 1.6mm A00347
buccal tube with vertical slot.018 Arch Slot .022 Arch Slot
Tube Only/ Tube Only/
Angulation Torque Distal Offset Height On Bases On Bands On Bases On Bands
Single Tube0° 0° 0° 4.6mm A00749 A00749 A00132 A00132
fixedappliances
142 www.rmortho.com
fixe
da
pp
lianc
es
LIGHT WIRE STAINLESS STEEL OR PLASTIC
Begg Systemmaxillary/mandibular brackets
Bracket Only/On Bases On Bands
Begg Type Light Wire Bracket A01086 A01086For .020 (0.508mm) archwire.
PlasticAnterior .016 Wire A03506
Cuspid/Bicuspid .016 Wire A03507
Insert Pins (Brass) Pkg. 100 approx.
Brass Lok Pin for Bracket A01086 .016 Wire A01087
For .018 or .020 Wire A01083
For Plastic Bracket A03506/A03507 .016 Wire A00046
buccal tubes
Tube Only/Width Right/Left On Bands
Round .036 I.D. (0.914mm)
Without Hook 6.4mm R/L A00161
With Mesial Hook R/L A00159
Round Gingival Placement (B. Lee – Australia)
.036 I.D. (0.914mm) 6.4mm
With Mesial/Buccal Hook, Maxillary Left/Mandibular Right A01055
With Mesial/Buccal Hook, Maxillary Right/Mandibular Left A01056
torquing arches (von der Heydt)Order Package
Number Contains
For Maximum Torque, F00133 4
For Medium Torque, F00134 4
Maximum Torque
Medium Torque
fixedappliances
www.rmortho.com 143
fixed
ap
plia
nce
s
MIURA PLASTIC EDGEWISE
maxillary/mandibular.018 Arch Slot .022 Arch Slot
W/O With W/O WithAngulation Torque Width Vertical Slot Vertical Slot Vertical Slot Vertical Slot
Anterior Single0° 0°
Medium 3.0mm A03012 A03013
Wide 3.7mm A03078 A03382 A03079 A03383
Extra Wide (maxillary only) 4.4mm A03082 A03393
Cuspid/Bicuspid Single0° 0°
Medium 3.0mm A03076 A03077
Wide 3.7mm A03080 A03384 A03081 A03385
Extra Wide 4.4mm A03394
Anterior Twin(maxillary only)0° 0°
Wide 4.4mm A03056 A03057
Cuspid/Bicuspid Twin0° 0°
Wide 4.4mm A03058 A03059
Extra Wide 4.8mm A03064 A03065
Molar Twin0° 0°
Extra Wide 4.8mm A03066 A03067
Buccal Tube Single0° 0° 4.4mm A03920
Lingual Hook2.4mm A03910
Lingual Button (RMO®)2.6mm A03901
fixedappliances
144 www.rmortho.com
fixe
da
pp
lianc
es
BIOPROGRESSIVE® BUCCAL TUBES
maxillary tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First Molar (Ricketts®)Triple convertible
0° 0° 0° 3.8mm .045 gingivalWithout hook R/L A08120 A01120 A08130 A01130
With hook R A08122 A01122 A08132 A01132L A08123 A01123 A08133 A01133
First Molar (Ricketts®)Triple non-convertible
0° 0° 0° 3.8mm .045 occlusalWithout hook R/L A01124
With hook (universal) R/L A01125
First Molar (Ricketts®)Triple convertible with hook
0° 0° 15° 4.0mm .045 gingivalR A08134 A04954 A04956
L A08135 A04955 A04957Headgear tube has 0˚ offsetAuxillary tube: 0˚ angulation, 0˚ torque, -15˚ DO
First Molar (Ricketts®)Triple convertible with hook
0° 0° 15° 3.8mm .045 gingivalR A04960L A04961
Headgear tube has 0˚ agulation, 0˚ torque, -15˚ DOAuxillary tube: 0˚ angulation, 0˚ torque, -15˚ DO
First MolarTriple convertible with hook
0° 0° 15° 3.8mm .045occlusalR A01156L A01157
Headgear tube has 0˚ offsetAuxillary tube: 0˚ angulation, 0˚ torque, 0˚ DO
fixedappliances
www.rmortho.com 145
fixed
ap
plia
nce
s
www.rmortho.com
BIOPROGRESSIVE® BUCCAL TUBES
maxillary tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On BandsFirst Molar (Bench®)Triple convertible with hook
0° -10° 15° 3.8mm .045 occlusal R A08060 A01160 A08070 A01170L A08061 A01161 A08071 A01171
Headgear tube: 0° offestAuxiliary tube: 0° torque, 0˚ offsettorque in base
First Molar (Bench®)Double convertible with hook
0° -10° 15° 3.8mm R A08078 A01178 A08080 A01180L A08079 A01179 A08081 A01181
Auxillary tube: 0˚ torque, 0˚ offsetTorque in base
First Molar (Bench®)Single convertible tube/bracket with hook
0° -10° 15° 3.8mm R A08294 A01194 A08494 A01294L A08295 A01195 A08495 A01295
Single with hook without cap0° -10° -15° 3.8mm R A01192 A08492 A01292
Torque in base. L A01193 A08493 A01293
Second Molar (Ricketts®)Single with hook
0° 0° 12° 3.3mm R A08382 A04982L A08383 A04983
Second Molar (Bench®)Single with hook
0° -10° 12° 3.3mm R A08062 A01162 A08072 A01172L A08063 A01163 A08073 A01173
fixedappliances
146 www.rmortho.com
fixe
da
pp
lianc
es
www.rmortho.com
BIOPROGRESSIVE® BUCCAL TUBES
mandibular tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands On Bases On Bands
First Molar Double non-convertible with ball hook
-5° 0° 0° 4.7mm R/L A01191 A01190Not preangulated
First Molar Double non-convertible with hook
-5° 0° 0° 4.7mm R A01110 A01110L A01111 A01111
Not preangulated
First/Second Molar (Ricketts®)Twin with hook
-5° -22° 12° 3.8mm R A08114 A01032L A08115 A01033
Preangulated.
First Molar (Ricketts®)Double convertible with hook
-5° -22° 12° 3.8mm R A08034 A04934L A08035 A04935
Auxillary tube has 0˚ torque, 0˚ offsetPreangulated. Torque in base
First Molar (Ricketts®)Double convertible with hook
-5° -24° 12° 3.8mm R A08364 A04964L A08365 A04965
Preangulated. Torque in base
First Molar (Ricketts®)Double convertible with hook
-5° -24° 12° 3.8mm R A08386 A04986L A08387 A04987
Auxillary tube: 0˚ angulation, 0˚ torque, 0˚ OffsetPreangulated. Torque in base
First Molar (Bench®)Double convertible with hook
-5° -27° 6° 3.8mm R A08064 A01164 A08074 A01174L A08065 A01165 A08075 A01175
Auxiliary tube: 0° angulation, 0° torque, 0° offsetPreangulated. Torque in base.
fixedappliances
www.rmortho.com 147
fixed
ap
plia
nce
s
www.rmortho.com
BIOPROGRESSIVE® BUCCAL TUBES
mandibular tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands On Bases On BandsFirst Molar (Ricketts®)Single convertible tube with hook
-5° -24° 12° 3.8mm R A08378 A04978L A08379 A04979
Single with hook without cap-5° -24° 12° 3.8mm R A04968
L A04969Preangulated. Torque in base
First Molar (Bench®)Single convertible tube/bracket with hook
-5° -27° 6° 3.8mm R A08298 A01198L A08299 A01199
Single with hook without cap-5° -27° 6° 3.8mm R A01196
L A01197
Preangulated. Torque in base.
Second Molar (Ricketts®)Single with hook
-5° -34° 6° 3.3mm R A08390 A04990L A08391 A04991
Preangulated.
Second Molar (Bench®)Single with hook
-5° -27° 6° 3.3mm R A08066 A01166 A08076 A01176L A08067 A01167 A08077 A01177
Preangulated. Torque in base.
fixedappliances
148 www.rmortho.com
fixe
da
pp
lianc
es
RMO® VERSION OF TIP EDGE, EDGEWISE BUCCAL TUBES
maxillary tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First Molar RMO Version of the (Tip Edge Technique)Double non-convertible with hook
0° -10° 6° 6.0mm .036 gingival R A06080L A06081
First MolarTriple non-convertible
0° 0° 0° 6.4mm .045 centered R A01041L A01041
Headgear tube centered and extending distally to serve as hook if needed
First MolarDouble convertible with hook
0° 0° 0° 3.8mm .045 occlusal R A08030 A04630 A08032 A04632L A08031 A04631 A08033 A04633
First Molar (Holdaway)Double non-convertible
0° 0° 6° 6.4mm .045 occlusal R A04007L A04008
Headgear tube has 0°offset. Rectangular tube extended distally to serve as hook if needed.
mandibular tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Lip Bumper Right/Left On Bases On Bands On Bases On Bands
First Molar RMO Version of the (Tip Edge Technique)Double non-convertible with hook
0° -27° 6° 6.4mm .036 gingival R A06082L A06083
First MolarDouble convertible with hook
0° 0° 0° 5.5mm R A04805 A04813L A04806 A04814
Auxiliary tube: 0° angulation, 0° torque, 0° offset
First and Second MolarDouble non-convertible with ball hook
-5° 0° 0° 4.7mm R/L A04926 A04926
Not preangulated.
fixedappliances
www.rmortho.com 149
fixed
ap
plia
nce
s
TWIN ARCH TUBE/UNIVERSAL EDGEWISE SINGLE BUCCAL TUBE
maxillary/mandibular tubesTubes Only
Angulation Torque Distal Offset Width Headgear On Bands
First Molar (Johnson Technique)Single round
0° 0° 0° 7.1mm .040 A001107.1mm .045 A00111
First MolarDouble round .036 + .045
0° 0° 0° 4.8mm .045 occlusalWithout hook A00282
With hook (universal) A00932
molar tubes single
.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands On Bases On Bands
With Distal Extension0° 0° 0° 4.8mm R/L A00160 A00160 A00101 A00101
Without Distal ExtensionR/L A00210 A00210
Extra Long With Distal Extension0° 0° 6° 6.4mm R/L A00771
With Closed Distal Extension0° 0° 0° 6.3mm R/L A00158 A00158
With Vertical Slot (Broussard®) With Distal Extension0° 0° 0° 4.6mm R/L A00749 A00749 A00132 A00132
Extra Long with Distal Extension 6.0mm R/L A00233
Heavy Type With Distal Extension0° 0° 0° 4.6mm R/L A00102
Without Distal Extension 3.3mm R/L A00106
Long Flange Type0° 0° 0° 5.6mm
Without hook R/L A00952 A00953
With hook maxillary right or mandibular left A00954 A00954 A00955 A00955With hook maxillary left or mandibular right A00956 A00956 A00957 A00957
Long Flange Type With Distal Offset0° 0° 6° 5.6mm
Without hook R/L A00974 A00975
With hook maxillary right or mandibular left A00976 A00977With hook maxillary left or mandibular right A00978 A00979
fixedappliances
150 www.rmortho.com
fixe
da
pp
lianc
es
STANDARD EDGEWISE BUCCAL TUBES
maxillary tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Headgear Right/Left On Bases On Bands On Bases On Bands
First MolarDouble Non-Convertible
0° 0° 0° 4.8mm .045 occlusalWithout hook R/L A00294 A00281
With universal hook R/L A00927 A00926
0° 0° 0° 4.8mm .045 gingivalWithout hook R/L A00295
With hook R/L A00928
0˚ 0˚ 0˚ 4.8mm .051 occlusal R/L A00283 A00283Without hook
R/L A00929With hook
First MolarDouble Long Flange Type
0° 0° 0° 4.8mm .045 occlusalWithout hook R A00958 A00960
L A00962 A00964
With hook R A00966 A00968L A00970 A00972
0˚ 0˚ 0˚ 4.8mm .051 occlusal R A00961Without hook L A00965
With hook R A00969L A00973
First MolarDouble Long Flange Type
0° 0° 6° 4.8mm .045 occlusalWithout hook R A00980 A00982
L A00984 A00986
With hook R A00990L A00994
0˚ 0˚ 6˚ 4.8mm .051 occlusal R A00981 A00983Without hook L A00985 A00987
With hook R A00991L A00995
First MolarDouble Convertible With Hook
0° 0° 0° 3.8mm .045 occlusal R A08030 A04630 A08032 A04632L A08031 A04631 A08033 A04633
fixedappliances
www.rmortho.com 151
fixed
ap
plia
nce
s
STANDARD EDGEWISE BUCCAL TUBES
mandibular tubes.018 Arch Slot .022 Arch Slot
Tubes Only/ Tubes Only/Angulation Torque Distal Offset Width Right/Left On Bases On Bands On Bases On Bands
First MolarDouble convertible with hook
0° 0° 0° 5.5mm R A04805 A04805 A04813 A04813L A04806 A04806 A04814 A04814
First MolarConvertible with hook
0° 0° 0° 4.3mm R A04904 A04904 A04906 A04906L A04905 A04905 A04907 A04907
fixedappliances
152 www.rmortho.com
fixe
da
pp
lianc
es
LINGUAL TUBES
Order Number Package Contains
Wilson® 3D® TubeDesigned to accept Lingual 3D® Fixed/Removable® Modular Orthodontics® (Wilson®) appli-ances.Tube without hook A04315 10
Tube with gingival hook A04314 10
Gaston-type single vertical lingual tube for .036 Ellis prefabricated lingual archesTube A00178 10
Ellis-type lingual tube with locking knobfor .036 Ellis prefabricated lingual arches
A00173 10
Lingual tube for hand formed lingual arches for “D-Shape” precious metal soldered posts(RMO does not stock lingual posts)
Tube A00190 10
Solderable lingual postuse only with the lingual tubes A00173 and A00178.036 lingual arch wire A00236 10
fixedappliances
www.rmortho.com 153
fixed
ap
plia
nce
s
DIRECT BOND LINGUAL BUTTONS, HOOKS, EYELET
Order Number Package Contains
Direct Bond Lingual Button• Stainless steel
• Round-base design
• With minimum protrusion, can be used from any direction for easy engagement ofelastics
• Ultra-smooth finish
A00047* 10*When ordering, please specify if on bonding base.
Direct Bond Molded Plastic Lingual ButtonCuspid/Bicuspid contour base A03901 10
Direct Bond Molded Plastic Lingual Hook (Miura)• Secures elastics in positive grip
• Versatile lingual positioning
A03910 10
Direct Bond Lingual Cleat• Stainless steel
• Low profile
• Easily adjustable
A00407 10
Direct Bond Lug/Cleat (Debnam)• Mesial-distal elastic hook
• Hook is bent out from base surface to engage elastics
On base of your choiceCuspid/Bicuspid A00476* 100Molar A00720* 100
*When ordering, please specify if on bonding base.
Direct Bond Eyelet• Accepts wire and small diameter elastic ligatures
On base of your choice A00039* 100*When ordering, please specify if on bonding base.
fixedappliances
154 www.rmortho.com
fixe
da
pp
lianc
es
DISPENSING AND STORAGE SYSTEMS
Order Number Package Contains
Multiple Case Dispenser• Multiple case dispenser; 2 through 100 set-ups
• Printed with Palmer notation for quick reference to individual brackets and tubes
• Designed to work with RMO standard dispensing systems
Bracket Tray and Lid J00774 1
Single Case Organizers J00099 25
adhesives
diagnosticsLIGHT WIRE STAINLESS STEEL OR PLASTIC diagnosticsdiagnosticsdiagnosticsdiagnostics
ad
hesiv
es
158 www.rmortho.com
Mono-Lok2™ One-Step Primer Activated System• Direct application–saves time
• Less waste–precise dispensing
• For metal or plastic brackets
• Two year shelf-life at room temperature from manufacture date
• 45 seconds for bracket adjustment
• Sets in five minutes for arch wire placement
Order Number Package Contains
Mono-Lok2™ Primer Activated Bonding System (Capsules)K00090 1 Kit
Kit includes:
0.35 gm Primer Activated Adhesive in Capsules J03241 40 (14gm)
13 ml Primer J03238 1
7 ml Etchant J03239 1
Mixing Pad J03240 1
2.5” Long Brush Tips J03231 50
Paste Applicators J03207 50
Mono-Lok2™ Primer Activated Bonding System (Syringe)K00091 with etchant
K00191 w/o etchant
Kit Includes:
3.5 gm Primer Activated Adhesive in Push Syringes J03234 4 (14gm)
13 ml Primer J03238 1
7 ml Etchant J03239 1
Mixing Pad J03240 1
2.5” Long Brush Tips J03231 50
Paste Applicators J03207 50
Mono-Lok2™ Primer Activated Bonding System (Jar)K00092 1 Kit
Kit Includes:
14 gm Primer Activated Adhesive in a Jar J03237 1 (14gm)
13 ml Primer J03238 1
7 ml Etchant J03239 1
Mixing Pad J03240 1
2.5” Long Brush Tips J03231 50
Paste Applicators J03207 50
adhesivesMONO-LOK2™ ONE-STEP PRIMER ACTIVATED AND LIGHT ACTIVATED BONDING SYSTEMS
159www.rmortho.com
ad
hesive
s
adhesives
Order Number Package Contains
Mono-Lok2™ Primer Activated Bonding System (Syringe Mini Kit)K00096 (w/ Etchant) 1 Kit
K00098 (w/o Etchant) 1 Kit
Mini Kit includes:
3.5 gm Primer Activated Adhesive in Push Syringe 1 (3.5gm)
3 ml Primer 1
3 ml Etchant (K00096 only) 1
Mixing Pad 1
2.5” Long Brush Tips 20
Mono-Lok2™ Light Activated Bonding System• No bracket drift• No stringing or sticking
• Visible light cure adhesive
• No mixing - no waste
• Immediate arch wire placement
• Multiple bracket placement
Mono-Lok2™ Light Activated Bonding System (Capsule)K00093 1 Kit
Kit Includes:
0.35 gm Light Activated Adhesive in Capsules J03236 40 (14gm)
7 ml Sealant Resin J03233 1
7 ml Etchant J03239 1
Mixing Pad J03240 1
2.5” Long Brush Tips J03231 50
MONO-LOK2™ ONE-STEP PRIMER ACTIVATED AND LIGHT ACTIVATED BONDING SYSTEMS
ad
hesiv
es
160 www.rmortho.com
adhesivesMONO-LOK2™ ONE-STEP PRIMER ACTIVATED AND LIGHT ACTIVATED BONDING SYSTEMS
Order Number Package Contains
Mono-Lok2™ Light Activated Bonding System (Syringe)K00094 with etchant
K00194 w/o etchant
Kit Includes:
3.5 gm Light Activated Adhesive in Push Syringes J03235 4 (14gm)
7 ml Sealant Resin J03233 1
7 ml Etchant J03239 1
Mixing Pad J03240 1
2.5” Long Brush Tips J03231 50
Mono-Lok2™ Light Activated Bonding System (Syringe Mini Kit)K00097 (w/ Etchant) 1 Kit
K00099 (w/o Etchant) 1 Kit
Mini Kit includes:
3.5 gm Primer Activated Adhesive in Push Syringe 1 (3.5gm)
3 ml Primer 1
3 ml Etchant (K00097 only) 1
Mixing Pad 1
2.5” Long Brush Tips 20
Etching Gel System• Uniform etching of the tooth
• Rinses off readily, non-staining
• Green color ensures precise placement
• Disposable tips provide more protection against cross-contamination
Order Number Package Contains
Etching Gel SystemK00095 1 Kit
Kit Includes:12 gm Etchant Gel in a Syringe J03245 1Replacement Tips 10
RefillsOrder Number Package Contains
Primer Activated Bonding System
0.35 gm Primer Activated Adhesive in Capsules J03241 40 (14 gm)
3.5 gm Primer Activaed Adhesive in a Push Syringe J03234 4 (14 gm)
14 gm Primer Activated Adhesive in a Jar J03237 1 (14 gm)
13 ml Primer J03238 1
Light Activated Bonding System
0.35 gm Light Activated Adhesive in Capsules J03236 40 (14 gm)
3.5 gm Light Activated Adhesive in a Push Syringe J03235 4 (14 gm)
7 ml Sealant Resin J03233 1
All Bonding Systems
Mono-Lok™ Dispensing Syringe for capsules J03212 1
Paste Applicators J03207 50
4.5” Spatulas J03230 25
2.5” Long Brush Tips J03231 50
7 ml Etchant J03239 1
Mixing Pad J03240 1
Etchant Gel Replacement Tips J03242 25
12 gm Etchant Gel J03245 1
adhesivesETCHING GEL / KIT REFILLS
ad
hesive
s
161
adhesives
162
CURING LIGHTS
www.rmortho.com
ad
hesiv
es
Order Number
HILUX 600 Fast Halogen Curing LightThis fast halogen curing offers operational flexibility and overall efficiency to servemore patients in less time with better results. The quartz halogen 81-watt highintensity bulb increases power output. A control on the transformer allows fourintensity modes (900-1200 mW/cm2 – bonding, boost, composite and bleach andis calibrated with a built in bar graph LED radiometer. This feature insures opti-mum power for every procedure. The bonding time is 8 seconds per bond. Anaudible sound marks the end of the cycle.
HILUX
Contents of unit: • 2 light guides
• 11-mm and a 13mm (tapered to an 8mm) Turbo accelerator
• remote hand piece holder
• 2 year warranty
600 Curing Light w/Turbo Tip, 110v J00100
600 Curing Light w/Turbo Tip, 220v J00101
Turbo Accelerator Replacement Tip J00110
OEM Replacement Light Bulb J00111
Anti-Glare Shield - HILUX J00112
RMO® Plasma LightThe RMO® Plasma Light enables you to effectively treat more patients by signifi-cantly reducing bonding time with assured precision and efficiency. Additionally,the RMO® Plasma Light enables you to whiten your patient’s teeth in a comfort-able, less-than 40-minute visit. This curing light utilizes a high power plasma arclamp allowing a true broad spectrum light source (1800-2000 mW/cm2) that isoptimized for polymerizing all composites and light cure materials. Studies showthat the RMO® Plasma Light cure 3x faster than conventional lights. The RMO®
Plasma Light has individualized settings for specific orthodontic applications.
RMO® Plasma Light
Plasma Arc Curing Light, 110v J00280
Plasma Arc Curing Light, 220v J00281
Plasma Light Replacement Tip J00290
Anti-Glare Safety Glasses - Plasma Light J00291
163
164
wire
diagnosticsLIGHT WIRE STAINLESS STEEL OR PLASTIC diagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnostics
wire
166 www.rmortho.com
elgiloy®
CHROME COBALT ALLOY
Elgiloy® WireElgiloy® wire is a premium, specially-fabricat-ed wire in four tempers. Each Elgiloy wire typehas separate characteristics. Wire formsmade from Elgiloy® can be heat-treated,depending on the desired application.Elgiloy® wire’s toughness and flexibility areeasily discernible with use.
Elgiloy® wire is superior, as furnished, for form-ing, and in performance time during treat-ment. All tempers have the unique capabilityof beginning as a “soft” easily handled wire.Because Elgiloy® wire can be used as is orheat-treated, it provides flexibility and controlin force applications.
Elgiloy® DevelopmentRMO® was selected to develop Elgiloy fororthodontics because of its leadership indeveloping new materials for the profession.This “wonder metal”, developed by the ElginNational Company as the “Heart That NeverBreaks” in modern precision time pieces, isnot a stainless steel. It is a patented cobalt-base alloy compounded of eight materials(cobalt 40%; chromium 20%; nickel 15%;molybdenum 7%; manganese 2%; beryllium.04%; carbon .15%; iron 15.81%).
Elgiloy® offers orthodontists particular advan-tages: superior physical properties, longerfunctioning as a resilient spring wire withoutdistortion or fatigue, easy soldering withoutannealing, easy heat-treating to increasephysical properties and simple electrolytepolishing.
Maximum properties are not necessarily bestfor all orthodontic purposes. Full spring quali-ties are excellent for small diameter archwires and coil springs, but larger wires of fullspring temper are impossible to handle. It fol-lows that the best qualities for a particularalloy form vary according to the work to bedone to the material and the final usage.Recognizing this, RMO® developed a series ofdifferent types of Elgiloy® wires, each fabricat-ed for specific applications and each identi-fied by a color marking on the end. With awide range of carefully engineered wiretypes, orthodontists can take full advantageof Elgiloy’®s superiority and versatility, whatev-er their techniques.
Elgiloy® Wire Properties• Set Resistance
Retains power longer than stainless steel
• Fatigue ResistanceMore cycles than stainless steel withoutbreakage
• Greater Spring EfficiencyUp to 20% more power than spring steelwithout an increase in dimensions
• Corrosion ResistanceOutperforms chrome stainless steel by 17%
• Non-MagneticNon-magnetic through all temperatureranges
How to Use Elgiloy®
• Blue
Blue Elgiloy® is initially the softest of the tem-pers. It can be welded with low heat, and sol-dered without embrittling. It is recommendedwhen the wire to be used is over .020"(0.508mm) or when the wire requires consid-erable bending, welding or soldering.Excellent for edgewise arches, lingual arches,retainers and removables.
• Yellow
Yellow Elgiloy® is initially ductile and slightlyharder than Blue. Using caution, you canspot-weld and solder to large Yellow Elgiloy®
wires, .021" x .025"; .030"; .036" (0.533mm x0.635mm; 0.762mm; 0.914mm), withoutembrittling them. Some practitioners useYellow as furnished, but it can be heat-treat-ed if greater resiliency or spring performanceis required. After heat-treating, Yellow can beadjusted slightly, but should not be adjustedsharply. It is excellent for flat wire techniques.Yellow Elgiloy® is recommended wheregreater spring qualities are needed thanthose provided by Blue Elgiloy®.
• Green
Green Elgiloy® is initially semi-resilient and willtemper comparable to high spring-temperedsteel wires. It can be shaped easily with thefingers and can be plier-manipulated beforeheat-treating.
• Red
Red Elgiloy® is initially “hard” with exceptional-ly high spring qualities. It is not recommend-ed for heat-treating. Use where adjustmentswill not be required after heat-treating.
167
wire
www.rmortho.com
ELGILOY® PREFORMED ARCHESwire
Penta-Morphic® Arches (Ricketts®)• Developed by Dr. Robert Ricketts
• Finishing arches for post-treatment provide long-term stability
• Five arch forms: normal, tapered, ovoid, narrow tapered, narrow ovoid
• Tooth size, facial type, and other morphological considerations have been built intothe five forms
• Distal length for individualized bends or continuation to second molar
• Maxillary or mandibular
• Yellow Elgiloy® Penta-Morphic® arches are heat-treated to maintain form and resiliency
RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR SQUARE SQUARE016" x .022" .017" x .025" .018" x .025" .019" x .025" .016" x .016" .017" x .017" Package
(0.406mm x 0.559mm) (0.432mm x 0.635mm) (0.457mm x 0.635mm) (0.483mm x 0.635mm) (0.406mm x 0.406mm) (0.432mm X 0.432mm) Contains
Yellow Elgiloy® (Heat Treated)
Normal E00551 E01025 E01030 E01040 E01020 E01070 10
Tapered E00552 E01026 E01031 E01041 E01021 E01071 10
Ovoid E00553 E01027 E01032 E01042 E01022 E01072 10
Narrow Tapered E00554 E01028 E01033 E01043 E01023 E01073 10
Narrow Ovoid E00555 E01029 E01034 E01044 E01024 E01074 10
Penta-Morphic® Arch Selector 8" x 10" Vinylite i 00509 1
Utility Arches (Ricketts®)• Blue Elgiloy® unheat-treated; designed to be used without heat-treating
• Without torque or anti-rotation bends
20mm Buccal Bridge Length25mm Buccal Bridge Length30mm Buccal Bridge LengthArch 4-incisor .016" x .016" .016" x .016" .016" x .016" PackageSize Measurement (mm) (0.406mm x 0.406mm) (0.406mm x 0.406mm) (0.406mm x 0.406mm) Contains
3 (25.0mm) E00822 E00832 E00842 3
4 (27.5mm) E00823 E00833 E00843 3
5 (30.0mm) E00824 E00834 E00844 3
6 (32.5mm) E00825 E00835 E00845 3
7 (35.0mm) E00826 E00836 E00846 3
8 (37.5mm) E00827 E00837 E00847 3
9 (40.0mm) E00828 E00838 E00848 3
11 (45.0mm) E00849 3
BUCCAL BRIDGELENGTH
FOUR
INC
ISOR
MEA
SURE
Normal Tapered Ovoid NarrowTapered
NarrowOvoid
Elgiloy® Preformed Natural Arches• Maxillary and mandibular arches are distinguished by permanent etchmarks: Three
(3) lines for a maxillary arch, one (1) line for a mandibular arch.
• Elgiloy® arches are delivered unheat-treated, allowing complex bends and loops to be easily made. After bending, Elgiloy® arches can be heat-treated to increase their springiness.
Blue Elgiloy® Yellow Elgiloy® Green Elgiloy®
Size (unheat-treated) (unheat-treated) (unheat-treated) PackageInch (mm) Max. Man. Max. Man. Max. Man. Contains
ROUND
.016 (0.406) A07502 A07522 100
.018 (0.457) A07503 A07523 100
SQUARE
.016 x .016 (0.406 x 0.406) A07505 A07525 10
RECTANGULAR
.016 x .022 (0.406 x 0.559) A07507 A07527 10
.017 x .025 (0.432 x 0.635) A07508 A07528 10
.018 x .025 (0.457 x 0.635) A07509 A07529 10
Elgiloy® Preformed Ideal Arches• Maxillary and mandibular arches are distinguished by permanent etchmarks: Three (3) lines for a maxillary arch, one (1) line for a mandibular arch.
• Elgiloy® arches are delivered unheat-treated, allowing complex bends and loops to be easily made. After bending, Elgiloy® arches can be heat-treated to increase
their springiness.
Blue Elgiloy® Yellow Elgiloy® Green Elgiloy®
Size (unheat-treated) (unheat-treated) (unheat-treated) PackageInch (mm) Max. Man. Max. Man. Max. Man. Contains
ROUND
.016 (0.406) A07552 A07572 100
.018 (0.457) A07553 A07573 100
SQUARE
.016 x .016 (0.406 x 0.406) A07555 A07575 10
RECTANGULAR
.016 x .022 (0.406 x 0.559) A07557 A07577 10
.017 x .025 (0.432 x 0.635) A07558 A07578 10
.018 x .025 (0.457 x 0.635) A07559 A07579 10
wire
168 www.rmortho.com
wireELGILOY
®PREFORMED ARCHES
169
wire
www.rmortho.com
wireELGILOY
®PREFORMED ARCHES
Elgiloy® Arch Blanks• All arch blanks are midline marked. Black maxillary, red mandibular.
• Elgiloy® arches are color-coded on one distal end to identify their temper (blue, yellow, etc.)
• Elgiloy® arch blanks are packaged in their unheat-treated state making complexbends and loops easier. After bending Elgiloy®, arches can be heat-treated toincrease their springiness.
• Blue Elgiloy® arches can be welded with low heat and soldered without embrittling.
• Yellow Elgiloy® arches are slightly harder than blue. Using caution, they can be spotwelded and soldered without embrittling.
Elgiloy® Arch BlanksBlue Elgiloy® Yellow Elgiloy® Green Elgiloy®
Size (unheat-treated) (unheat-treated) (unheat-treated) PackageInch (mm) Max. Man. Max. Man. Max. Man. Contains
ROUND
.014 (0.356) A00860 A00865 100
.016 (0.406) A00861 A00866 100
.018 (0.457) A00862 A00867 100
.020 (0.508) A00863 A00868 100
SQUARE
.016 x .016 (0.406 x 0.406) A00917 A00922 A00907 A00912 10
.017 x .017 (0.432 x 0.432) A00908 A00913 10
.019 x .019 (0.483 x 0.483) A00920 A00925 10
RECTANGULAR
.016 x .022 (0.406 x 0.559) A00888 A00897 A00870 A00879 10
.017 x .022 (0.432 x 0.559) A00889 A00898 A00871 A00880 10
.017 x .025 (0.432 x 0.635) A00890 A00899 A00872 A00881 10
.018 x .022 (0.457 x 0.559) A00891 A00900 10
.018 x .025 (0.457 x 0.635) A00892 A00901 A00874 A00883 10
.019 x .026 (0.483 x 0.660) A00893 A00902 A00875 A00884 10
.021 x .025 (0.533 x 0.635) A00894 A00903 A00876 A00885 10
Maxillary Anterior Torquing Retractor (Bench®)• Blue Elgiloy® .016" x .016" (0.406mm x 0.406mm) unheat-treated
PackageContains
0 (30.0mm) E00148 5
.5 (32.0mm) E00149 5
1 (35.0mm) E00150 5
2 (40.0mm) E00151 5
3 (45.0mm) E00152 5
FOUR
INCISO
R
MEASU
RE
wire
170 www.rmortho.com
ELGILOY®
PREFORMED ARCHES
Double Delta Space Closure Arch Leveler (Ricketts®)• Blue Elgiloy® .016" x .016" (0.406mm x 0.406mm) unheat-treated
• Controlled activation essential in the movement of teethIncisor Order Package
Size Measurement (mm) Number Contains
WITH OFFSET BEND3 (25.0) E00465 34 (27.5) E00442 35 (30.0) E00466 36 (32.5) E00462 37 (35.0) E00463 38 (37.5) E00443 39 (40.0) E00467 3
10 (42.5) E00468 311 (45.0) E00464 312 (50.0) E00469 3
WITHOUT OFFSET BEND3 (25.0) E00980 34 (27.5) E00981 35 (30.0) E00982 36 (32.5) E00983 37 (35.0) E00984 38 (37.5) E00985 39 (40.0) E00986 3
10 (42.5) E00987 311 (45.0) E00988 312 (50.0) E00989 3
Maxillary Anterior Torquing Retractor• Bioprogressive® treatment arches
• Blue Elgiloy® .016" x .016" (0.406mm x 0.406mm) unheat-treated
• Controlled activation essential in the movement of teeth
PackageContains
WITH OFFSET BEND3 (25.0mm) E00400 34 (27.5mm) E00401 35 (30.0mm) E00402 36 (32.5mm) E00403 37 (35.0mm) E00404 38 (37.5mm) E00440 39 (40.0mm) E00405 3
10 (42.5mm) E00441 311 (45.0mm) E00406 312 (50.0mm) E00407 3
WITHOUT OFFSET BEND3 (25.0mm) E00970 34 (27.5mm) E00971 35 (30.0mm) E00972 36 (32.5mm) E00973 37 (35.0mm) E00974 38 (37.5mm) E00975 39 (40.0mm) E00976 3
10 (42.5mm) E00977 311 (45.0mm) E00978 312 (50.0mm) E00979 3
wire
171
wire
www.rmortho.com
ELGILOY® SPECIAL PREFORMED WIRES
Bioprogressive® Auxiliaries (Ricketts®).016" x .016" Package
(0.406mm x 0.406mm) Contains
Maxillary Cuspid Retractor— Blue Elgiloy® unheat-treatedRight A00520 4
Left A00521 4
Mandibular Cuspid Retractor— Blue Elgiloy® unheat-treatedRight A00519 4
Left A00518 4
Double Delta Sectionals — Blue Elgiloy® unheat-treatedCuspid Retractor for closing small spaces
Mandibular Left E00815 3Mandibular Right E00816 3
Maxillary Left E00817 3Maxillary Right E00818 3
Cuspid Retractor Spring (Broussard®)• Blue Elgiloy® – Facilitates the movement of the cuspid and controls the mesial-distal
rotation as well as prevents over-tipping. Heat-treated.Order Number Package Contains
.014" (0.356mm) A00478 10
.016" (0.406mm) A00479 10
.018" (0.457mm) A00480 10
“T” Series (Ricketts®)Premolar rotation and leveling. Blue Elgiloy® unheat-treated..016" x .016" (0.406mm x 0.406mm) E00433 3
Ideal Buccal Section (Ricketts®)Blue Elgiloy® unheat-treated..016" x .016" (0.406mm x 0.406mm)
Extraction E00435 3
Non-extraction E00436 3
wire
wire
172 www.rmortho.com
ELGILOY® SPECIAL PREFORMED WIRES
Anterior Torquing Spring (Warren)• Applies continuous torquing action to individual anterior teeth
• Spring slips on archwire straddling the bracket on the anterior tooth to be moved
• Placement of the arch wire in the bracket activates the spring, providing singlecontact with the tooth surface
• Each size is designed for a specific wire dimension and will not grip other dimen-sional wire sizes or round wire
Spring Size For Arch Wire Size Order PackageInch (mm) Inch (mm) Number Contains
.010 (0.254) .010 x .028 (0.254 x 0.711) A00465 10
.011 (0.279) .016 x .022 (0.406 x 0.559) A00466 10
.011 (0.279) .018 x .025 (0.457 x 0.635) A00474 10
.011 (0.279) .019 x .026 (0.483 x 0.660) A00467 10
Auxiliary Springs (Broussard®) Elgiloy® – Heat-treatedSpring Size Order Package
Inch (mm) Number Contains
Uprighting Spring – Yellow Elgiloy® to upright a tooth or toparallel the roots
.014 (0.356) A00484 10
.016 (0.406) A00485 10
.018 (0.457) A00486 10
Light Wire Torquing Arch (von der Heydt)• Inserted in the central light wire brackets and secures with pins
• Activated by tying distal ends to the arch wire with ligating wire• Heat-treated Red Elgiloy® .014" (0.356 mm) Order Package
Number Contains
For maximum torque F00133 4
For medium torque F00134 4
Maxillary Quad Helix (Ricketts®)• Continuous controlled force application, solder to bands
• For rotation or stabilization of molars, for expansion, or for contraction of the arch• .038" (0.965mm) Blue Elgiloy® unheat-treated Order Package
Number Contains
1 A00510 3
2 A00511 3
3 A00512 3
4 A00513 3
5 A00514 3
Assortment, one of each size K00690 5
Maximum Torque
Medium Torque
wire
173
wire
www.rmortho.com
Coil Springs – Unheat-treated• Super resilient
• Extremely durable
• Precision wound
Coil Spring Inside Diameter Accepts Open Closed Stop wound PackageWire Size Arch Wire Size (mm) Coil Spring Coil Spring Coil Spring Contains
.0056" x .022" (0.142 x 0.559) F00070 F00071 2' (60cm)
.007" x .020" (0.178 x 0.508) F00090 2' (60cm)
.007" x .022" (0.178 x 0.559) F00092 F00093 2' (60cm)
.007" x .025" (0.178 x 0.635) F00094 2' (60cm)
.007" x .028" (0.178 x 0.711) F00096 F00097 2' (60cm)
.007" x .030" (0.178 x 0.762) F00098 F00099 2' (60cm)
.007" x .036" (0.178 x 0.914) F00104 2' (60cm)
.008" x .020" (0.203 x 0.508) F00020 2' (60cm)
.008" x .022" (0.203 x 0.559) F00022 F00023 2' (60cm)
.008" x .025" (0.203 x 0.635) F00024 F00025 2' (60cm)
.008" x .028" (0.203 x 0.711) F00026 F00027 2' (60cm)
.008" x .030" (0.203 x 0.762) F00028 F00029 2' (60cm)
.008" x .032" (0.203 x 0.813) F00030 2' (60cm)
.008" x .036" (0.203 x 0.914) F00032 F00033 2' (60cm)
.009" x .020" (0.229 x 0.508) F00036 F00037 2' (60cm)
.009" x .022" (0.229 x 0.559) F00038 F00039 2' (60cm)
.009" x .025" (0.229 x 0.635) F00040 F00041 2' (60cm)
.009" x .028" (0.229 x 0.711) F00042 F00043 2' (60cm)
.009" x .030" (0.229 x 0.762) F00044 F00045 2' (60cm)
.009" x .032" (0.229 x 0.813) F00046 F00047 2' (60cm)
.009" x .035" (0.229 x 0.889) use with end section F00114 2' (60cm)
.009" x .036" (0.229 x 0.914) F00048 F00049 2' (60cm)
.009" x .040" (0.229 x 1.016) F00050 F00051 2' (60cm)
.010" x .020" (0.254 x 0.508) F00052 2' (60cm)
.010" x .022" (0.254 x 0.559) F00054 2' (60cm)
.010" x .025" (0.254 x 0.635) F00056 F00057 2' (60cm)
.010" x .028" (0.254 x 0.711) F00058 F00059 2' (60cm)
.010" x .030" (0.254 x 0.762) F00060 F00061 2' (60cm)
.010" x .032" (0.254 x 0.813) F00062 F00063 2' (60cm)
.010" x .036" (0.254 x 0.914) F00064 F00065 2' (60cm)
.010" x .040" (0.254 x 1.016) F00066 F00067 2' (60cm)
.010" x .045" (0.254 x 1.143) F00080 F00081 2' (60cm)
ELGILOY® SPECIAL PREFORMED WIRES
COIL SPRING WIRE SIZE
INSIDE DIAMETER
wire
SIZE
wire
174 www.rmortho.com
ELGILOY® RETAINER FORMS
Hawley Labial Retainer Forms – Unheat-treated• Blue Elgiloy® .030" (0.762mm) – easily contoured
• Can be used as is or heat-treated to greater resiliency
• “Serrated” end sections provide stability in acrylicArch Contour Nonarch Contour Package
Size Width (with anterior offset) (for custom fitting) Contains
00 1 3/8" (34.92mm) E00600 A00238 5
0 1 1/2" (38.10mm) E00601 A00239 5
1 1 5/8" (41.28mm) E00602 A00240 5
2 1 3/4" (44.45mm) E00603 A00241 5
3 1 7/8" (47.62mm) E00604 A00242 5
4 2" (50.80mm) E00605 A00243 5
5 2 1/8" (53.98mm) E00606 A00244 5
6 2 1/4 " (57.15mm) E00607 A00245 5
7 2 3/8 " (60.32mm) E00608 A00273 5
8 2 1/2 " (63.50mm) E00609 A00274 5
Hawley Arch Selectori 00513 1
Mandibular Lingual Retainer (Ricketts®)• Blue Elgiloy® .038" (0.965mm) unheat-treated
• Designed especially for first bicuspid (4 x 4)
• May be cut and adapted for canine (3 x 3)Order Package
Incisor Width Number Contains
16mm E00413 10
17mm E00414 10
18mm E00415 10
19mm E00416 10
20mm E00417 10
21mm E00418 10
22mm E00419 10
SIZE
wire
175
wire
www.rmortho.com
ELGILOY® WIRE IN STRAIGHT LENGTHS
Elgiloy® Wire ● Round, 14" (35.56cm) LengthsSize Red Green Yellow Blue Package
Inch (mm) (Resilient) (Semi-resilient) (Ductile) (Soft) Contains
.009 (0.229) E00209 30
.010 (0.254) E00210 E00273 30
.011 (0.279) E00211 30
.014 (0.356) E00214 E00278 30
.016 (0.406) E00216 E00280 E00201 E00282 30
.018 (0.457) E00218 E00281 E00202 E00283 20
.020 (0.508) E00203 E00284 E00220 20
.022 (0.559) E00204 E00285 E00222 20
.025 (0.635) E00205 E00225 10
.028 (0.711) E00206 E00228 10
.030 (0.762) E00207 E00230 10
.032 (0.813) E00276 E00232 10
.036 (0.914) E00208 E00236 10
.038 (0.965) E00221 10
.040 (1.016) E00237 6
.045 (1.143) E00238 6
.060 (1.524) E00226 5
Elgiloy® Wire ■ Square (Square cornered), 14" (35.56cm) Lengths
Size Yellow Blue PackageInch (mm) (Ductile) (Soft) Contains
.016 x .016 (0.406 x 0.406) E00300 E00304 10
.017 x .017 (0.432 x 0.432) E00301 E00305 10
.019 x .019 (0.483 x 0.483) E00289 E00242 10
Blue Elgiloy® Wire Square (w/rounded corners), Ricketts®, 14"(35.56cm) Lengths
.017 x .017 (0.432 x 0.432) E00317 10
Elgiloy® Wire ■■ Rectangular (Square cornered), 14" (35.56cm) LengthsSize Yellow Blue Package
Inch (mm) (Ductile) (Soft) Contains
.016 x .018 (0.406 x 0.457) E00258 10
.016 x .020 (0.406 x 0.508) E00296 10
.016 x .022 (0.406 x 0.559) E00302 E00306 10
.017 x .022 (0.432 x 0.559) E00303 E00307 10
.017 x .025 (0.432 x 0.635) E00308 E00345 10
.018 x .022 (0.457 x 0.559) E00286 E00239 10
.018 x .025 (0.457 x 0.635) E00293 E00245 10
.019 x .025 (0.483 x 0.635) E00259 10
.019 x .026 (0.483 x 0.660) E00292 E00294 10
.021 x .025 (0.533 x 0.635) E00287 E00240 10
.0215 x .028 (0.546 x 0.711) E00288 E00241 10
Yellow Elgiloy® Wire ■■■■■ Flat Ribbon Arch, 14" (35.56cm) Lengths
.010 x .020 (0.254 x 0.508) E00260 10
Elgiloy® Wire ● Round Retainer Clasp, 14" (35.56cm) LengthsSize Blue Package
Inch (mm) (Soft) Contains
.030 (0.762) E00230 10
.032 (0.813) E00232 10
.036 (0.914) E00236 10
.038 (0.965) E00221 10
.040 (1.016) E00237 6
.045 (1.143) E00238 6
.060 (1.524) E00226 5
wire
Recommended when the wire to be used is.030 or larger and when considerable
bending or soldering is required.
wire
176 www.rmortho.com
NICKEL-TITANIUM PREFORMED ARCHES
Penta-Morphic® Arches (Ricketts®)• Finishing arches for post-treatment provide long-term stability• Five arch forms: normal, tapered, ovoid, narrow tapered, narrow ovoid• Tooth size, facial type, and other morphological considerations have been built
into the five forms
• Distal length for individualized bends or continuation to second molar• Maxillary or mandibular
Orthonol® Superelastic Nickel-Titanium Preformed Natural Arches and Straight Lengths• Nickel-titanium alloys are shape memory alloys
• Orthonol is superelastic nickel-titanium in preformed natural arch shapes• Provides an ideal continuous gentle force at a constant, uninterrupted force
level for tooth movement• Reduces chair time by extending time between visits• Permanent midline etchmarks: three lines for a maxillary arch, one line for a
mandibular arch
Size PackageInch (mm) Maxillary Mandibular Contains
ROUND.012 (0.305) A07011 A07031 10.014 (0.356) A07000 A07020 10.016 (0.406) A07001 A07021 10.018 (0.457) A07002 A07022 10
SQUARE.016 x .016 (0.406 x 0.406) A07004 A07024 10.018 x .018 (0.457 x 0.457) A07007 A07027 10
RECTANGULAR.016 x .022 (0.406 x 0.559) A07005 A07025 10.017 x .025 (0.432 x 0.635) A07006 A07026 10.018 x .025 (0.457 x 0.635) A07008 A07028 10.019 x .025 (0.483 x 0.635) A07009 A07029 10
STRAIGHT LENGTHS 7” (17.8cm).016 x .022 (0.406 x 0.559) E01100 10
Normal Tapered Ovoid NarrowTapered
NarrowOvoid
SQUARE RECTANGULAR RECTANGULAR ROUND ROUND ROUND016" x .016" 016" x .022" .017" x .025" .014" .016" .018" Package(0.406mm x 0.406mm)(0.406mm x 0.559mm) (0.432mm x 0.635mm) (0.356mm) (0.406mm) (0.457mm) Contains
Bio-Lastic™ “Dimpled” (Nickel-Titanium)Normal E01520 E01530 E01535 E01500 E01505 E01510 10
Ovoid E01521 E01531 E01536 E01501 E01506 E01511 10
Narrow Tapered E01522 E01532 E01537 E01502 E01507 E01512 10
Tapered E01523 E01533 E01538 E01503 E01508 E01513 10
Narrow Ovoid E01524 E01534 E01539 E01504 E01509 E01514 10
wire
Penta-Morphic® Arch Selector Order Number Package Contains
8" x 10" Vinylite i00509 1
177
wire
www.rmortho.com
NICKEL-TITANIUM PREFORMED ARCHES
Orthonol™ Superelastic Nickel-Titanium Preformed Ideal Arches• Permanent midline etchmarks: three lines for a maxillary arch, one line for a
mandibular arch
• Provides an ideal, continuous, gentle force which remains constant during tooth movement
Size PackageInch (mm) Maxillary Mandibular Contains
ROUND.012 (0.305) A07400 A07420 10.014 (0.356) A07401 A07421 10.016 (0.406) A07402 A07422 10.018 (0.457) A07403 A07423 10
SQUARE.016 x .016 (0.406 x 0.406) A07405 A07425 10.018 x .018 (0.457 x 0.457) A07406 A07426 10
RECTANGULAR.016 x .022 (0.406 x 0.559) A07407 A07427 10.017 x .025 (0.432 x 0.635) A07408 A07428 10.018 x .025 (0.457 x 0.635) A07409 A07429 10.019 x .025 (0.483 x 0.635) A07410 A07430 10
Thermaloy™ (Thermal Activated Nickel-Titanium) Preformed Natural Shape• Pliable at room temperature and superelastic at body temperature
• Same elastic working range as superelastic with lower forces
• Can be used earlier in treatment to provide tongue control
• Can be used as an initial arch wire for treatment
• Easier to ligate in severely maligned cases and impacted canines
• Increases patient comfort
• Permanent midline etchmarks: three lines for a maxillary arch, one line for a mandibular arch
Size PackageInch (mm) Maxillary Mandibular Contains
ROUND.014 (0.356) A07300 A07320 10
.016 (0.406) A07301 A07321 10
.018 (0.457) A07302 A07322 10
SQUARE.016 x .016 (0.406 x .0.406) A07303 A07323 10
RECTANGULAR.016 x .022 (0.406 x 0.559) A07304 A07324 10
.017 x .025 (0.432 x 0.635) A07305 A07325 10
.018 x .025 (0.457 x 0.635) A07306 A07326 10
.019 x .025 (0.483 x 0.635) A07307 A07327 10
.021 x .025 (0.533 x 0.635) A07308 A07328 10
wire
wire
178 www.rmortho.com
Orthonol™ Reverse Vector Arches• Increases efficiency in closing anterior open bites and correcting excessive over-
bites
• Employs curve of spee to eliminate the need for step downs, step ups and othervarieties of activating loops to correct overbites
• Leveling by extrusion (relative intrusion) can now be accomplished by one continuous reverse vector
• Minimizes molar rotation
• Controls incisor torque
• Etched midline markSize Package
Inch (mm) Maxillary Mandibular Contains
ROUND016 (0.406) A07051 A07071 10
.018 (0.457) A07052 A07072 10
SQUARE.016 x .016 (0.406 x 0.406) A07054 A07074 10
RECTANGULAR.016 x .022 (0.406 x 0.559) A07055 A07075 10
.017 x .025 (0.431 x 0.635) A07056 A07076 10
.019 x .025 (0.483 x 0.635) A07059 A07079 10
NICKEL-TITANIUM PREFORMED ARCHES
wire
179
wire
www.rmortho.com
NICKEL-TITANIUM COIL SPRINGSwire
Compression Springs (Open Coil)• Cost effective alternative to maintaining a large office inventory of sizes of
constant force superelastic coil springs
Coil Spring Inside Order PackageWire Size Diameter (mm) Number Length Contains
.010” x .030” (0,254 x 0.762) F00300 7’ 3 (53cm)
.012” x .030” (0.305 x 0.762) F00301 7” 3 (53cm)
.012” x .045” (0.305 x 1.143) F00302 7” 3 (53cm)
Extension Springs (Closed Coil)• Stainless steel eyelets are attached to each end of the spring to easily
engage hooks.
• Available in 9mm and 12mm lengths
Coil Spring Inside Order PackageWire Size Diameter (mm) Number Length Contains
.010” x .030” (0.254 x 0.762) F00320 9mm 10
.010” x .030” (0.254 x 0.762) F00321 12mm 10
.011” x .030” (0.279 x 0.762) F00322 9mm 10
.011” x .030” (0.279 x 0.762) F00323 12mm 10
.012” x .030” (0.305 x 0.762) F00324 9mm 10
.012” x .030” (0.305 x 0.762) F00325 12mm 10
Distalizing Spring (Stop Wound Coil)• Distalizes molars without use of headgear
• Slides easily over any archwire
• Fit to any desired length
• Activate by compressing spring, with the use of an RMO® lock
Coil Spring Inside Order PackageWire Size Diameter (mm) Number Length Contains.010” x .045” (0.254 x 1.143) F00340 7” 3 (53cm)
wire
180 www.rmortho.com
BENDALOY™ ARCHES / STRAIGHT LENGTHS
Bendaloy™ Titanium - Molybdenum Based Alloy Preformed Natural Arches• Large springback with better control over tooth movement
• Minimizes adjustment intervals
• With less stiffness than stainless steel, it allows wires to fill the bracket for control withlighter forces
• Is formable and capable of being formed into complicated configurations without fracture
Bendaloy™ Round is ideal for:• Alignment; Rotations; Retractions and Finishing
Bendaloy™ Rectangle is ideal for:• Torquing; Rotations; Retractions and Finishing
Size PackageInch (mm) Maxillary Mandibular Contains
ROUND.016 (0.406) A07121 A07130 10.018 (0.457) A07122 A07131 10
SQUARE.016 x .016 (0.406 x 0.406) A07124 A07133 10
RECTANGULAR.016 x .022 (0.406 x 0.559) A07125 A07134 10.017 x .025 (0.432 x 0.635) A07126 A07135 10.019 x .025 (0.483 x 0.635) A07128 A07137 10
Bendaloy™ Titanium - Molybdenum Based Alloy Straight Lengths• High springback and more resilient than stainless steel
• Low stiffness which produces light, continuous forces
• High formability which allows extensive bending and wire forming without fracture
• Springback of this wire makes it excellent for sectional arches, auxiliaries anddetailing arch wires.
Bendaloy™ Straight Lengths are ideal for:• Alignment; Rotations; Retractions and Finishing
• Rectangular/square lengths also for Torquing
Size Order PackageInch (mm) Number Contains
ROUND.016 (0.406) E00620 10.018 (0.457) E00621 10
SQUARE.016 x .016 (0.406 x 0.406) E00622 10
RECTANGULAR.016 x .022 (0.406 x 0.559) E00623 10.017 x .025 (0.432 x 0.635) E00624 10
ROUND LAB WIRE.028 (0.711) E00625 10.032 (0.813) E00626 10.036 (0.914) E00627 10
wire
181
wire
www.rmortho.com
Stainless Steel Wire PropertiesComposition of Tru-Chrome®
Type 302 Type 304
Carbon 0.08-0.20 0.08 max
Manganese 2.00 max 2.00 max
Silicon 1.00 max 1.00 max
Phosphorus 0.040 max 0.040 max
Sulphur 0.030 max 0.030 max
Chromium 17-19 18-30
Nickel 8-10 8-10
Iron Balance Balance
Tru-Chrome® DevelopmentWire has been basic to orthodonticssince its beginning. By serving as hold-ing, anchoring and spring elements, theorthodontist is able to stimulate toothmovement predictably and precisely.
In developing specialty wires for modernorthodontics, several considerations areinvolved:
1. Semantic problem of matchingrequirements and terminology oforthodontics with engineering termsand tests.
2. Selecting the best alloys, tempers,sizes, etc.
3. Engineering procedures and qualitycontrols for accuracy and depend-ability.
4. Refinement of time-saving instru-ments, equipment and handlingtechniques to assure best results.
In the selection here, you will find themost complete choice of controlledquality wire for all techniques.
The success of Chrome Alloy StainlessSteel in orthodontics lies in the keencombination of delicacy and strength. Itpossesses, to an unusual degree, thosethree requisites of an orthodontic metal:hardness, elastic limit, and tensilestrength.
Tru-Chrome® Stainless Steel WireTru-Chrome® stainless steel wire is a sta-ble, consistent, predictable perfor-mance wire, offered in four tempers.Quality controls are the tightest of anystainless steel wire in the industry.
• Resilient Arch Wire Temper
Resilient Arch Wire Temper is available inpreformed arch blanks and is used insome special wire forms, depending onthe suitability for the desired usage.Straight lengths are provided for thosewho prefer forming their own arch wires.
• Retainer Wire or No. 2 Temper
Retainer Wire or No. 2 Temper stainlesssteel wire has a softer temper than ArchWire Temper, which enables the opera-tor to more easily form the wire intoretainer appliances. Forming the wirework-hardens it andprovides a working resiliency for retainerappliances.
• Clasp Wire Temper
Clasp Wire is a stainless steel wirebetween the Resilient Arch Wire Temperand the Retainer Wire Temper. It is softenough to be instrument-formed to theclasp configuration and, in forming,gains sufficient hardening from plieringto have a satisfactory spring resiliencyfor clasps.
• Ligature Wire Temper
Ligature Wire is a stainless steel wire of“dead-soft” temper that allows ligatingand tying to be done with minimal work-hardening of the wire.
tru-chrome®
STAINLESS STEEL
wire
182 www.rmortho.com
TRU-CHROME® STAINLESS STEEL PREFORMED ARCHES
RECTANGULAR RECTANGULAR RECTANGULAR RECTANGULAR SQUARE ROUND ROUND ROUND ROUND .016" x .022" .017" x .025" .018" x .025" .019" x .025" .016" x .016" .014" .016" .018" .020" Package(0.406 x 0.559mm) (0.432 x 0.635mm) (0.457 x 0.635mm) (0.483 x 0.635mm) (0.406 x 0.406mm) (0.356mm) (0.406mm) 0.457mm 0.508mm Contains
Tru-Chrome® Stainless SteelNormal E00651 E00661 E01035 E01045 E01000 E01005 E01010 E01015 E01060 10
Tapered E00652 E00662 E01036 E01046 E01001 E01006 E01011 E01016 E01061 10
Ovoid E00653 E00663 E01037 E01047 E01002 E01007 E01012 E01017 E01062 10
Narrow Tapered E00654 E00664 E01038 E01048 E01003 E01008 E01013 E01018 E01063 10
Narrow Ovoid E00655 E00665 E01039 E01049 E01004 E01009 E01014 E01019 E01064 10
Penta-Morphic® Arch Selector Order Number Package Contains
8" x 10" Vinylite i00509 1
Penta-Morphic® Arches (Ricketts®)• Developed by Dr. Robert Ricketts
• Finishing arches for post-treatment provide long-term stability
• Five arch forms: normal, tapered, ovoid, narrow tapered, narrow ovoid
• Tooth size, facial type, and other morphological considerations have been built intothe five forms
• Distal length for individualized bends or continuation to second molar
• Maxillary or mandibular
wire
Normal Tapered Ovoid NarrowTapered
NarrowOvoid
Tru-Chrome® Stainless Steel Preformed Natural Arches• Tru-Chrome® preformed natural arches can be easily soldered, stress relieved, and
spot welded.
• Permanent midline etchmarks: three lines for a maxillary arch, one line for a mandibular arch
Size PackageInch (mm) Maxillary Mandibular Contains
ROUND.014 (0.356) A07201 A07221 100.016 (0.406) A07202 A07222 100.018 (0.457) A07203 A07223 100
SQUARE.016 x .016 (0.406 x 0.406) A07205 A07225 10.018 x .018 (0.457 x 0.457) A07206 A07226 10
RECTANGULAR.016 x .022 (0.406 x 0.559) A07207 A07227 10.017 x .025 (0.432 x 0.635) A07208 A07228 10.018 x .025 (0.457 x 0.635) A07209 A07229 10.019 x .025 (0.483 x 0.635) A07210 A07230 10.021 x .025 (0.533 x 0.635) A07211 A07231 10
183
wire
www.rmortho.com
Tru-Chrome® Stainless Steel Anterior Contour Arches• All arch blanks are anterior contour (3 x 3) with midline marked
Black maxillaryRed mandibular
• Tru-Chrome® stainless steel arch blanks can be easily soldered, stress relieved, spotwelded
Size PackageInch (mm) Maxillary Mandibular Contains
ROUND.014 (0.356) A00780 A00785 100.016 (0.406) A00781 A00786 100.018 (0.457) A00782 A00787 100.020 (0.508) A00783 A00788 100
SQUARE.016 x .016 (0.406 x 0.406) A00819 A00824 10.017 x .017 (0.432 x 0.432) A00820 A00825 10.019 x .019 (0.483 x 0.483) A00822 A00827 10
RECTANGULAR.016 x .022 (0.406 x 0.559) A00798 A00808 10.017 x .025 (0.432 x 0.635) A00800 A00810 10.018 x .022 (0.457 x 0.559) A00801 A00811 10.018 x .025 (0.457 x 0.635) A00802 A00812 10.019 x .026 (0.483x 0.660) A00803 A00813 10.021 x .025 (0.533 x 0.635) A00804 A00814 10
Maxillary Anterior Torquing Arch (Debnam)Package
.018" .020" Contains
Tru-Chrome® Stainless Steel E00610 E00611 5
Tru-Chrome® Stainless Steel Preformed Ideal Arches• Tru-Chrome® preformed Ideal™ arches can be easily soldered, stress relieved, and
spot welded.
• Permanent midline etchmarks: three lines for a maxillary arch, and one line for a mandibular arch.
Size PackageInch (mm) Maxillary Mandibular Contains
ROUND.014 (0.356) A07251 A07271 100.016 (0.406) A07252 A07272 100.018 (0.457) A07253 A07273 100
SQUARE.016 x .016 (0.406 x 0.406) A07255 A07275 10.018 x .018 (0.457 x 0.457) A07256 A07276 10
RECTANGULAR.016 x .022 (0.406 x 0.559) A07257 A07277 10.017 x .025 (0.432 x 0.635) A07258 A07278 10.018 x .025 (0.457 x 0.635) A07259 A07279 10.019 x .025 (0.483 x 0.635) A07260 A07280 10.021 x .025 (0.533 x 0.635) A07261 A07281 10
TRU-CHROME® STAINLESS STEEL PREFORMED ARCHESwire
wire
184 www.rmortho.com
TRU-CHROME® STAINLESS STEEL WIRE IN STRAIGHT LENGTHS
Tru-Chrome® Stainless Steel Wire ● Round, 14" (35.56cm) LengthsSize Resilient Package
Inch (mm) Wire Temper Contains
.010 (0.254) E00003 30
.011 (0.279) E00004 30
.012 (0.305) E00005 30
.014 (0.356) E00007 30
.016 (0.406) E00009 30
.018 (0.457) E00010 20
.020 (0.508) E00011 20
.022 (0.559) E00013 20
.024 (0.610) E00014 20
.025 (0.635) E00015 10
.028 (0.711) E00016 10
.030 (0.762) E00017 10
.032 (0.813) E00018 10
.036 (0.914) E00019 10
.040 (1.016) E00020 6
.045 (1.143) E00021 6
.050 (1.270) E00022 5
.060 (1.524) E00024 5
Tru-Chrome® Stainless Steel Wire ■ Square (Square cornered),14" (35.56cm) Lengths.016 x .016 (0.406 x 0.406) E00313 10
.017 x .017 (0.432 x 0.432) E00314 10
.019 x .019 (0.483 x 0.483) E00092 10
Tru-Chrome® Stainless Steel Wire ■■ Rectangular (Square cornered),14" (35.56cm) Lengths.016 x .022 (0.406 x 0.559) E00098 10
.017 x .022 (0.432 x 0.559) E00099 10
.017 x .025 (0.432 x 0.635) E00311 10
.018 x .022 (0.457 x 0.559) E00096 10
.018 x .025 (0.457 x 0.635) E00097 10
.019 x .026 (0.483 x 0.660) E00095 10
.021 x .025 (0.533 x 0.635) E00090 10
.0215 x .028 (0.546 x 0.711) E00091 10
Tru-Chrome® Stainless Steel Wire ●■● Rectangular (Round cornered),14" (35.56cm) Lengths.018 x .022 (0.457 x 0.559) E00104 10
.018 x .025 (0.457 x 0.635) E00103 10
.019 x .026 (0.483 x 0.660) E00107 10
.021 x .025 (0.533 x 0.635) E00105 10
.0215 x .028 (0.546 x 0.711) E00106 10
Tru-Chrome® Stainless Steel Wire ■■■■■ Flat Ribbon Arch, 14"(35.56cm) Lengths.010 x .020 (0.254 x 0.508) E00110 20
.015 x .028 (0.381 x 0.711) E00116 20
.015 x .036 (0.381 x 0.914) E00117 20
wire
185
wire
www.rmortho.com
TRU-CHROME® STAINLESS STEEL WIRE IN STRAIGHT LENGTHS
Tru-Chrome® Stainless Steel Retainer Wire, No. 2 Temper● Round, 14" (35.56 cm) Lengths• Retainer Wire, Number 2 Temper – is softer than arch wire, which enables the oper-
ator to more easily form the wire into retainer appliances
• Forming of the wire work-hardens the wire and provides a working resiliency forthose types of appliances
Size Order PackageInch (mm) Number Contains
.028 (0.711) E00080 10
.030 (0.762) E00081 10
.032 (0.813) E00082 10
.036 (0.914) E00083 10
.040 (1.016) E00084 6
Tru-Chrome® Stainless Steel Retainer Clasp Wire (Clasp WireTemper) ● Round, 12" (30 cm) Lengths• Clasp Wire Temper – is between the resilient arch wire and the retainer wire
• It is soft enough to be instrument formed to the clasp configuration
• Forming gains sufficient hardening for the pliering to have satisfactory springresiliency for clasp
Size Half PackageInch (mm) Gauge Round Round Contains
.064 (1.626) 14 E00070 5
.057 (1.448) 15 E00071 5
.040 (1.016) 18 E00062 5
.036 (0.914) 19 E00063 5
.032 (0.813) 20 E00064 5
.028 (0.711) 21 E00065 5
wire
wire
186 www.rmortho.com
TRU-CHROME® STAINLESS STEEL WIRE IN STRAIGHT LENGTHS
TRI-FLEX™ Twisted WireTri-Flex™ (3 strands) is spring-tempered twisted leveling wire for early treatment stages.It bends readily and can accept great deflection before its limit is reached. It pro-vides gentle force and will not unravel or fray when cut.
Size Order Package
Inch (mm) Number Contains
ROUND (14" STRAIGHT LENGTHS).0155 (0.381) E00175 10.0175 (0.445) E00176 10.0195 (0.495) E00177 10.0215 (0.546) E00178 10
ROUND (PREFORMED ARCHES).0155 (0.381) E00170 10.0175 (0.445) E00171 10.0195 (0.495) E00172 10.0215 (0.546) E00173 10
SUPRA-FLEX™ Twisted WireSupra-Flex™ (6 strands) is cable-designed initial stage arch wire with five exterior wireshelically wound around a core wire. Can be flexed to a great degree without takinga set. It delivers constant uniform light force over a long period of time and does notfray when cut.
ROUND (14" STRAIGHT LENGTHS).0155 (0.394) E00179 10.0175 (0.445) E00180 10.0195 (0.495) E00181 10.0215 (0.546) E00182 10
ROUND (PREFORMED ARCHES).0155 (0.394) E00183 10.0175 (0.445) E00184 10.0195 (0.495) E00185 10.0215 (0.546) E00186 10
ROUND 30-FOOT SPOOLS.0155 (0.394) E00187 1.0175 (0.445) E00188 1.0195 (0.495) E00189 1.0215 (0.546) E00190 1
FLEX-VIII™ Braided WireFlex-VIII™ (8 strands) is a braided wire for unscrambling and leveling. Bright finish.
SQUARE (PREFORMED ARCHES).016 x .016 (0.406 x 0.406) E01400 10
RECTANGULAR (PREFORMED ARCHES).016 x .022 (0.406 x 0.558) E01401 10.017 x .022 (0.431 x 0.558) E01402 10.017 x .025 (0.431 x 0.635) E01403 10.018 x .025 (0.457 x 0.635) E01404 10.019 x .025 (0.482 x 0.635) E01405 10.021 x .025 (0.533 x 0.635) E01406 10
wire
187
wire
www.rmortho.com
Preformed Auxiliary Ligature Tie Hooks (Kobayashi type)• Stainless Steel• Quickly and easily tied in place without removing arch wire• Spot welded to form hook• Slipped under tie wing and tied• Hooks adapt to up/down usage
Size Order PackageInch (mm) Number Contains
.012" (0.304) A01202 100
.014" (0.355) A01203 100
Preformed Ligature Wire• Stainless Steel – dead soft• Precise convenient shape for quick use.008" (0.203) E00700 1,000.009" (0.228) E00701 1,000.010" (0.254) E00702 1,000.011" (0.279) E00703 1,000.012" (0.304) E00704 1,000
Ligature Wire – Tru-Chrome® Stainless Steel – dead soft
PG Cuspid Retraction Spring• Controlled retraction of cuspids without distal tipping or rotations• Precalibrated load – deflection, anti-tip, anti-rotation, movement-to-force ratios• Optimum vertical control of anterior and posterior segments• Large gingival ovoid double helix, small occlusal loop with angulated extensions• .017" x .022" (0.431mm x 0.588mm)Size Order Number Package Contains
Maxillary right/Mandibular left A00516 5Maxillary left/Mandibular right A00517 5
Retracting Springs (Hice)• For straight line retracting forces from the spring to molar anchorage• Spring has a preformed flat base for perpendicular attachment to the arch wire• Hooks provide an easily positioned welded and soldered elastic anchorage steel• Stainless Steel
Maxillary right/Mandibular left A00736 10Maxillary left/Mandibular right A00735 10
TRU-CHROME® STAINLESS STEEL SPECIAL PREFORMED WIREwire
Size Order PackageInch (mm) Number Contains
1 OZ. SPOOL.007" (0.177) E00120 1.008" (0.203) E00121 1.009" (0.228) E00122 1.010" (0.254) E00123 1.011" (0.279) E00124 1.012" (0.304) E00125 1.014" (0.355) E00126 1.015" (0.381) E00127 1.016" (0.406) E00128 1
.018" (0.457) E00129 1
.020" (0.508) E00130 1Size Order Package
Inch (mm) Number Contains
1 LB. SPOOL.009" (0.228) E00133 1.010" (0.254) E00134 1.011" (0.279) E00135 1.012" (0.304) E00136 1
wire
188 www.rmortho.com
Closing Spring (Parker)• Stainless steel; designed for retracting; built-in guide for stability and movement
reference• The open loop is hooked over the buccal tube; the straight end is pulled and tied
to the bracket or eyeletA00042 10
Paralleling Spring (von der Heydt)Stainless Steel – high resiliency; light Wire technique; variety of arm lengths for maximumcontrol of root paralleling from anteriors to bicuspids
Size Short PackageInch (mm) Position Arm Length Contains
.014 (0.355) UR/LL A00854 10
.014 (0.355) UL/LR A00855 10
Ball Retainer Clasp, Tru-Chrome® Stainless SteelStem Ball Order Package
Diameter Diameter Number Contains
.024" (0.6mm) .055" (1.4mm) A00290 10
.032" (0.8mm) .059" (1.5mm) A00291 10
.040" (1.0mm) .074" (1.9mm) A00296 10
Assortment of .024" and .032" sizes K00475 20
Assortment of .024", .032" and .040" sizes K00477 30
Adams Clasp, Tru-Chrome® Stainless Steel• Preformed modified arrow clasp form
• May be used as is or adapted to contact tooth surface according to Adams’ technique
• Manufactured loop set at 20° angle for better interproximal slippage
• Clasps are measured midline of loop to midline of loop.028" (0.711mm) Order .028" (0.711mm) Order Package
Mesial Distal Number Mesial Distal Number Contains
(8mm) A00252 10
(9mm) A00253 10
(5mm) A00249 (10mm) A00254 10
(6mm) A00250 (11mm) A00256 10
(7mm) A00251 10
Assortment A00255 45
“J” Clasp – Stainless Steel• Provides retention below the marginal crest of the tooth
Order PackageSize Number Contains
.032" (0.8mm) G00042 10
.040" (1.0mm) G00050 10
.047" (1.2mm) G00055 10
3 55 35 33 5
TRU-CHROME® STAINLESS STEEL SPECIAL PREFORMED WIREwire
189
wire
www.rmortho.com
RM Lock• Stainless steel
• Allows placement in one piece
• For arch wire stop, tying auxiliaries, tiebacks and activating coil springs
• Offset screw assures proper locking action on all shapes of wire
• Available in two sizesOrder Number Package Contains
Small Lock – accepts wire .012" to 0.28" (.304mm to 0.711mm)
Without hook A00226 5
With hook A00224 5
Large Lock –- accepts wire .030" to .045" (0.762mm to 1.143mm)
Without hook A00227 5
With hook A00225 5
Replacement ScrewFor either Small or Large Lock A00228 5
Hex Wrench for RM LockStainless steel with hard steel tip i 00034 1
RMO Bondable Lingual Retainer• Quicker, far more control, economical, no emergencies, versatile, hygienicDescription Order Number Package Contains
Pad, Mx/Mn Cen/Lat R/L E00524 50
Pad, Mx/Mn Cus R/L E00525 50
Pad, Terminal, Cus, Mx L, Mn R E00526 50
Pad, Terminal, Cus, Mx R, Mn L E00527 50
Pad, Terminal, 1Bi, Mx L, Mn R E00528 50
Pad, Terminal, 1Bi, Mx R, Mn L E00529 50
Wire, Retainer E00530 10
Instrument i 01102 1
KITS
Kit, 3x3 6 max/6 man K00250 72 pads, 4 wires, 1 instrument
Kit, 3x3 6 max/6 man K02502 72 pads, 4 wires, no instrument
Kit, 4x4 6 max/6 man K00253 96 pads, 4 wires, 1 instrument
RM LOCKS, BONDABLE LINGUAL RETAINERwire
190 www.rmortho.com
Expansion Screws• Threads and guide pins are accurately machined to prevent looseness and
binding without slipback
• Generally, each turn of 360° results in 0.9mm expansion
• Provided with holding tag and protective seal which are removed after polymerizationExpansion Order Package
Length Width Thickness Capacity Number Contains
Spring Loaded, Stainless Steel 11.0mm 8.6mm 4.0mm 4.0mm A00601 114.0mm 8.6mm 4.0mm 6.0mm A00602 1
Conventional Type, Stainless Steel13.0mm 9.7mm 3.3mm 6.0mm A00612 1
Fan-Type Expansion Screw and Hinge12.0mm 4.5mm 3.0mm 7.0mm A00639 1(diagonal)
Scheu “Steady-Press” Expansion Screw• Reduced bulk
• Positive control
• No slippage
• Combination of stainless steel and plastic with key included
UNI O (without place-holding tag)11.0mm 4.3mm 3.3mm 4.0mm A00653 113.0mm 4.3mm 3.3mm 6.0mm A00654 115.0mm 4.3mm 3.3mm 8.0mm A00655 1
UNI M (with place-holding tag) 13.0mm 7.0mm 4.0mm 6.0mm A00651 1
Telescope 12.0mm 7.0mm 4.0mm 6.0mm A00626 114.0mm 7.0mm 4.0mm 8.0mm A00627 116.0mm 10.0mm 4.0mm 10.0mm A00629 1
Piston Screw• Facilitates individual tooth movement
• Precision spring-loaded interchangeable piston screws
• Can be incorporated with many techniques
• Adaptable for “spray-on” cold cure method
Piston Screw Assortment K00105 1
Serrated Housing A00523 10
Smooth Housing A00524 5
Short Piston Screw (4.0mm) A00525 5
Medium Piston Screw (6.0mm) A00526 5
Long Piston Screw (8.0mm) A00527 5
Mounting Screw A00522 5
Special Reamer A00529 1
Special Driver A00528 1
RMO EXPANSION SCREWS, ACCESSORIESwire
wire
191
wire
www.rmortho.com
Retainer Cases• Made of high impact polypropylene—prevents breakage
• Vented living hinge deters odor
• Standard size-holds upper or lower retainers or a positioner
• Lab size holds bionators or special lab appliances
• Snap lock prevents unwanted opening
• Fits easily in pockets
Order PackageNumber Contains
Standard SizeBlue J01305 12
White J01306 12
Lab Size
Blue J01307 12
White J01308 12
RETAINER BOXESwire
wire
192 www.rmortho.com
TemperatureFahrenheit to centigrade°F ° C °F °C °F °C
-40 -40 60 15.6 200 93.3
-30 -34.4 70 21.1 300 148.9
-20 -28.9 80 26.7 400 204.4
-10 -23.3 90 32.2 500 260
0 -17.8 100 37.8 600 316
10 -12.2 110 43.3 700 371
20 -6.7 120 48.9 800 427
30 -1.1 130 54.4 900 482
40 4.4 140 60 1000 538
50 10 150 65.6 2000 1093
RMO’s products are made to inch specifications and are not perfectly interchangeablewith products made to metric measurements. The attached tables may be used whenproduct measurement conversions are needed. The figures have been rounded to useableform. It should be noted that when converting from measurements already expressed inmillimeters (such as manufacturer’s specifications) to inches, a discrepancy due to rounding may occur.
Common Fractions of anInch and
Decimals to MillimeterInches Millimeters
1/64 .0156 .396
1/32 .0312 .793
1/16 .0625 1.588
1/8 .1250 3.175
3/16 .1875 4.763
1/4 .2500 6.350
5/16 .3125 7.938
3/8 .3750 9.525
1/2 .5000 12.700
5/8 .6250 15.875
3/4 .7500 19.050
1 1.000 25.400
Conversion of weightsavoirdupois
1 pound = .4536 kilograms= 16 ounces= 7000 grains
1 ounce = 28.36 grams= 437.5 grains
1 gram = 15.432 grains
1 grain = .0648 gramsTROY
1 pound = 12 ounces= 5760 grains
1 ounce = 20 pennyweights= 480 grains
1 grain troy = 1 grain avoirdupois
INCH MM GAUGE INCH MM GAUGE INCH MM GAUGE INCH MM GAUGE
.001 .03 .026 .66 .051 1.30 16 .076 1.93
.002 .05 .027 .69 .052 1.32 .077 1.96
.003 .08 .028 .71 21 .053 1.35 .078 1.98
.004 .10 .029 .74 .054 1.37 .079 2.01
.005 .13 .030 .76 .055 1.40 .080 2.03
.006 .15 .031 .79 .056 1.42 .081 2.06 12
.007 .18 33 .032 .81 20 .057 1.45 15 .082 2.08
.008 .20 32 .033 .84 .058 1.47 .083 2.11
.009 .23 31 .034 .86 .059 1.50 .084 2.13
.010 .25 30 .035 .89 .060 1.52 .085 2.16
.011 .28 29 .036 .91 19 .061 1.55 .086 2.18
.012 .30 .037 .94 .062 1.57 .087 2.21
.013 .33 28 .038 .96 .063 1.60 .088 2.23
.014 .36 27 .039 .99 .064 1.63 14 .089 2.26
.015 .38 .040 1.02 18 .065 1.65 .090 2.29
.016 .41 26 .041 1.04 .066 1.68 .091 2.31 11
.017 .43 .042 1.07 .067 1.70 .092 2.34
.018 .46 25 .043 1.09 .068 1.73 .093 2.36
.019 .48 .044 1.12 .069 1.75 .094 2.39
.020 .51 24 .045 1.14 17 .070 1.78 .095 2.41
.021 .53 .046 1.17 .071 1.80 .096 2.44
.022 .56 .047 1.19 .072 1.83 13 .097 2.45
.023 .58 23 .048 1.22 .073 1.85 .098 2.49
.024 .61 .049 1.24 .074 1.88 .099 2.51
.025 .64 22 .050 1.27 .075 1.90 .102 2.59
conversiontables
194
instruments
diagnosticsLIGHT WIRE STAINLESS STEEL OR PLASTIC diagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnostics
inst
rum
ent
s
196 www.rmortho.com
Superior quality maximizes satisfaction.A top quality instrument offers two unbeatable advan-tages for its user:• Top quality instruments make the daily work more
satisfying. Because they allow for a more preciseand ergonomic work process—which leads to betterwork results day to day over years and years.
• Top quality instruments are the more economicchoice. 1) Top quality instruments enable their usersto achieve the same work result in less time or a bet-ter work result in the same time 2) Top quality instru-ments last longer and therefore minimize invest-ments for replacement and repair.
Adolf Schweickhardt GmbH & Co. has been producingdental instruments for 103 years, which makes themone of the most experienced manufacturers in the world. • We are one of the very few manufacturers producing
its complete line from raw material to final instru-ment only in Germany. German craftsmanship withits legacy of precision produces the best quality inthe world.
• We invest heavily to support craftsmanship with state-of-the-art, high-tech machinery. Our computerizedhigh precision milling machines, for example, areaccurate to 1/100mm.
Inserted PliersEspecially for inserted pliers, fulfilling all of the abovementioned requirements demands great care andexpertise.Certain treatments of hard wires such as cutting andsharp bending of arch wires, specifically stress theworking ends of orthodontic pliers. Therefore, theseworking ends need to be equipped with hard inserts toensure perfect function and prevent them from beingdamaged by the wire. These inserts are applied to theplier via soldering. RMO Schweickhardt pliers are made from a specialalloy and are applied to the plier with a highly sophisti-cated soldering technique.Our insert alloy combines hardness (around 62 HRc)with a high corrosion resistance. Therefore our pliers donot need to be chrome plated. Consequently, exceptfor chrome plated instruments, our pliers can be sub-ject to ultrasonic cleaning and disinfection with appro-priate liquids as well as autoclave sterilization.In addition, our pliers don't have the risk of chromeplate peeling off. That could potentially endanger thepatient's health if it happens during use of the plier inthe patient's mouth. It would also end the lifetime of
the plier because if the chrome starts peeling off, theplier will corrode quickly.Our insert soldering technique was especially devel-oped for these pliers. The inserts are soldered to theplier with great care, which means effort…but thiseffort pays off because the inserts stick safer to thebeaks. No RMO Schweickhardt plier ever loses itsinserts during use, which is not always so for these sortsof pliers.Having mastered the insert technique, three morerequirements have to be fulfilled to produce a topquality plier.Our beaks and inserts are milled on high precisionmachines and additionally get final adjustment byexpert craftsmen with long experience. Because thebest insert can only be as good as the exactness ofits shape.Our locks are produced with great care to ensure asmooth and precise action over the whole workingangle. That's because precision of lock determinesprecision of plier. If the lock is not tight enough, theplier will not allow for precise work because the work-ing ends will not close as precisely as they are sup-posed to. If the lock is too tight, opening and closingwill cause difficulties which in turn makes exact workvery difficult (usually the jam will arise in the first fewmilli-meters of opening).A box lock—the gold standard of locks in terms oflong-term precision—is technically not possible forinserted pliers. But our screw locks ensure a preciseopening/closing procedure over a long time. This isbecause we fasten the screw into the body with a special procedure so that it won't become loose evenafter years of usage.
All edges of our pliers are carefully chamfered toincrease safety of patient and doctor (no pinching orwounding of gums).For less stressing wire treatments such as ligature wires,bands, elastics and light wires, orthodontic pliers donot need inserts. The advantage of these non-insertedpliers is that they can be equipped with box locks. Still,for some procedures, an additional protection of thebeaks is desirable for:• A better durability of beaks (the beaks will hold their
exact form longer).• A safer grip of the wire (the wire won't slip off).Therefore, we protect those pliers with a tungsten car-bide coating and we are the only ones who do it.Apart from the coating of the beaks, our non-insertedpliers are produced with the same great care on beakform, locks and edge chamfering as our inserted pliers.
What makes instruments from RMOSchweickhardt the better choice?
instrume
nts
www.rmortho.com 197
What makes inserted pliers from RMOSchweickhardt the better choice?
More precise handling of wire. Highprecision beaks guarantee perfect
holding, bending and cutting results.
High corrosion resistance withoutchrome plating—no risk of plating
peeling off.
Higher safety and comfort throughcareful chamfering of all edges.
Longer lasting working ends throughespecially hard inserts.
Safer hold of inserts in beaks throughspecial soldering technique: practical-ly no inserts coming loose during use.
Better guidance of working ends.Precision machine work on both lock
and screw secure a precise and evenaction over a long time.
Easier instrument care: All standard U.S. hygienic proce-dures are applicable, especially ultrasonic cleaning and
hot air sterilization up to 390° F.
More precise handling of wire. Highprecision beaks guarantee perfect
holding, bending and cutting results.
Higher safety and comfort throughcareful chamfering of all edges.
Longer lasting working ends through aspecial tungsten carbide coating.
Better guidance of working ends. Highprecision box locks secure a preciseand even action over a long time.
Easier instrument care: All standard U.S. hygienic pro-cedures are applicable, especially ultrasonic cleaning
and hot air sterilization up to 390° F.
What makes non-inserted pliers from RMOSchweickhardt the better choice?
inst
rum
ent
s
198 www.rmortho.com
instrumentsSCHWEICKHARDT BAND SEATING INSTRUMENTS
Order PackageNumber Contains
Band Adapter (RMO®)• Durable plastic bite block and RMO® tempered stainless steel
band seating pin
• For bite or hand rocking bands
• White plastic handle
• Serrated pin
• Replacement tip (can be installed at chairside)
i00064 1
Replacement tip i00065 2
Band Pusher (RMO®)• Serrated stainless steel tip, non-removable
• Stainless steel handle – square with chamfered corners
• Tip end has square serrations
i00300 1
Band Seater (RMO®)• Spring actuated thrust insures proper band seating
• Plastic handle with stainless steel barrel and tempered steelremovable tip
with offset tip i00580 1
replacement offset tip i00581 1
with straight tip i00600 1
replacement straight tip i00601 1
with narrow straight tip (Gaston) i00610 1
replacement narrow straight tipi00611 1
instrume
nts
www.rmortho.com 199
instrumentsSCHWEICKHARDT BAND CONTOURING INSTRUMENTS
Order PackageNumber Contains
Contouring Plier (Johnson) (RMO®)• Concave and convex tips for contouring bands
• Stainless steel
• Box joint
i00114 1
Contouring Plier (Gordon) (RMO®)• For bands and anterior stainless steel crowns
• Stainless steel handle and shank
• Box joint
i00137 1
inst
rum
ent
s
200 www.rmortho.com
instrumentsSCHWEICKHARDT UTILITY PLIERS
Order PackageNumber Contains
How Plier Straight (RMO®)• Extra hard stainless steel
• Good all around utility plier has long slender lip-safe beaks
• Tips are serrated and hard carbide coated for additional grip
• Tip-safe edges at box and beaks
• Tips are precisely adjusted
• Box joint
i00110 1
How Plier Curved (RMO®)• Same as i00110 only with curved beaks
• Curved beaks increase efficiency in posterior area
• Box joint
i00111 1
Utility Plier (Weingart Style) (RMO®)• Stainless steel
• Tips are delicate and meet precisely so that even smallattachments can be firmly held
• General purpose utility plier with offset
• Inserted tempered tips for longer life
• Serrated and lip safe
• Hard tool steel inserts
i00556 1
instrume
nts
www.rmortho.com 201
instrumentsSCHWEICKHARDT WIRE BENDING PLIERS
Order PackageNumber Contains
Loop Plier (Tweed) (RMO®)• Extra hard stainless steel
• Tips precision milled
• Three step loop former .047" (1.2mm), .063" (1.6mm),.091" (2.3mm)
• Grooved and serrated opposing tip for very small loops
• For up to .022" x .028" (0.559mm x 0.711mm) wire
• Non-removable tip
• Box joint
i00350 1
Utility Arch/Loop Forming Plier (Ricketts®) (RMO®)• Makes 90° bends up to .016" x .016" Blue Elgiloy®
• Intraoral activation
• 4.0mm and 8.0mm slots have been built in the bottom beak touse as a guide for chairside fabrication of utility arches
• Reduction in the number of pliers needed at chairside
• Extra hard steel
i00360 1
Loop Forming Plier (Optical Type) (RMO®) • Extra hard stainless steel
• Cone and concave beaks for round wires
• Concave beak is contoured to ensure more uniform loops
• Round beak is precision ground to .039" at tip
• For working round wires up to .018"
• Box joint
i00351 1
Loop Plier (Tweed) (RMO®)• Includes one extra replacement tip
• Hard tool steel inserts
• Round beak is heat-treated. It has two sections of.047" (1.2mm), .059" (1.5mm)
• Concave beak prevents wire nicking and ensures more uniformloops; for making Omega loops
i00548 1
Replacement tips i00549 2
inst
rum
ent
s
202 www.rmortho.com
instrumentsSCHWEICKHARDT WIRE BENDING PLIERS
Order PackageNumber Contains
Wire Bending Plier (Angle) Bird Beak Type (RMO®)• Extra hard steel
• Tips meet very precisely
• Cone and pyramid shaped tips
• Carbide coated tips for better grip of wire and longer lifetime
• Round beak is precision ground to .039" (1.0mm) at tip
• Box joint
i00139 1
Light Wire Plier • Longer, more gradually tapered beaks than the Bird Beak plier
• For working light round wires up to .016" (0.406mm)
• Longer beaks make it easier to bend small diameter loops
i00140 1
Lingual Arch Forming Plier • Designed to from double back and triple back bends in either
.030" (0.762mm) or .036" (0.914mm) wire for inserting in lingualsheaths
• Double back forming groove is close to the plier joint to assureadequate flattening
• Recommended for use with 3D® Fixed/Removable® (Wilson®)for palatal activation appliances
i00420 1
Closing Loop Plier (Nance) (RMO®)• Extra hard stainless steel
• Four step loop forming beaks precision milled
• Radiused edges prevent wire damage
• Box joint
i00001 1
instrume
nts
www.rmortho.com 203
instrumentsSCHWEICKHARDT WIRE BENDING PLIERS
Order PackageNumber Contains
Three Jaw Clasp Adjusting Plier (Aderer Type) (RMO®)• Tips for rounded or dimensional wire up to .040" (1.016mm)
• Box joint
• Exact shape and position of beaks will avoid squeezing andmarking of wire
• Made from extra hard stainless steel
Up to .040" (01.016mm) i00200 1
Up to .030" (0.762mm) i00201 1
Arch Forming Plier (Angle) (RMO®)• For bending, holding or torquing dimensional wires
• Stainless steel with hard carbide coated tip surfaces
• Box joint
• Offering maximum resistance against wear by torquing
i00442 1
inst
rum
ent
s
204 www.rmortho.com
instrumentsSCHWEICKHARDT CUTTERS
Order PackageNumber Contains
Distal End Cutter, Safety Hold (RMO®)• Shear cuts hardwire and then safety holds the loose distal end to
prevent wire from going into tissue
• Hard tool steel insert
• Cut wire up to .022 x .028 (0.559mm x 0.711mm) and .026 round.
• Designed for intraoral cutting and lip safety
• Made from selected surgical stainless steel to provide lastingbeauty and durability
• Not ideal for braided wire
Regular beak i00550 1
Small beak* i00554 1
*Reaches the molar area easier, due to the small beak
Ligature Cutter (RMO®)• Stainless steel
• Soft ligature wire only – up to .020" (0.508mm)
• All edges of lock are lip safe for intraoral use
• Fine tips for easy intraoral access
• Pliers will cut wires up to the very tip of the inserts
• Hard tool steel inserts diamond honed
i00552 1
Miniature Cutter• Stainless steel
• Soft ligature wire only – up to .012" (0.305mm)
• Hard tool steel inserts diamond honed
i00551 1
instrume
nts
www.rmortho.com 205
instrumentsSCHWEICKHARDT CUTTERS
Order PackageNumber Contains
Ligature and Hard Wire Cutter (RMO®)• Stainless steel
• Pliers are designed for cutting wires with minimum force
• Cuts to maximum of .022" x .029" (0.559mm x 0.711mm)
• Hard tool steel inserts
i00553 1
Heavy Wire Cutter • Hard tool steel insert
• Cutting capacity up to .045" (1.143mm) in the rear area,.024" (0.610mm) in front
• Hard tool steel inserts
i00265 1
inst
rum
ent
s
206 www.rmortho.com
instrumentsSCHWEICKHARDT LIGATION PLIERS AND INSTRUMENTS
Order PackageNumber Contains
Ligature Tying Plier (Coon) (RMO®)• Semi-automatic
• Locking channel is chamfered and burr-free to allow wire toslide before locking without being cut
• Tips are thin allowing close contact to bracket
i00153 1
Module Placing Plier• For initial placing of force modules
• Ideal for placing separators
• Easy access to difficult areas (posterior)
• Reduces module breakage
• Patient safe, easy spring-back action
i00810 1
Ligature Tucker and Tier (Broussard®) (RMO®)• Stainless steel
• One end twists steel ligature into a ‘tie’
• The other ‘tucks’ twisted wire
i00274 1
Ligature Tucker (RMO®)• Straight notched tip at one end for anterior brackets
• Angled notched tip at other end for posterior brackets
• Slot in tips is chamfered to avoid breakage of ligature wires
• Tips are smoothed to avoid hurting tissue
i00273 1
instrume
nts
www.rmortho.com 207
instrumentsSCHWEICKHARDT LIGATION PLIERS AND INSTRUMENTS
Order PackageNumber Contains
Needle Holder Small Narrow Tip (Mathieu) (RMO®)• Precision made ligating instrument tips – safe beaks
• With ratchet lock handle
• Tips are serrated and carbide coated for positive gripping of liga-ture wires and modules; also to reduce wear
• Hook tip style for easy placement of elastic modules and gripping
i00028 1
Needle Holder Small (Mathieu) (RMO®)• Precision made ligating instrument tips – safe beaks
• With ratchet lock handle
• Free sliding inner spring opens beaks when lock is released
• Tips are serrated and carbide coated for positive gripping of liga-ture wires and modules; also to reduce wear
• 5 1/4" (13cm) long
i00030 1
Mosquito Hemostat (RMO®)• 4 3/4" (12cm) long
• With locking handle
• Serrated tips for positive gripping
i00124 1
inst
rum
ent
s
208 www.rmortho.com
instrumentsSCHWEICKHARDT BAND AND BRACKER REMOVAL / SCALERS
Order PackageNumber Contains
Posterior Band Removing Plier (RMO®)• Useful for removing direct bond attachments
• Long chisel tip with carbide insert
• Facilitates removal of posterior bands
• With replaceable occlusal nylon pads
• Stainless steel
• Will stay sharp
i00347 1
Replacement Pads i00357 10
Direct Bond Removing Plier• Wedges between both edges of the base and the tooth surface
and lifts off with virtually no stress
• Grips firmly for occlusal-gingival or mesial-distal use
• Hard tool steel insert
Narrow i00545 1
Wide i00546 1
Utility Scaling, Ligature Remover and Band SeatingInstrument (Schure) (RMO®)• Extra hard stainless steel
• Precision knurled handle
• Sharp scaling shape on one end and serrated band seating tipon the other
• Tips are heat-treated to maintain sharp edge for extended use
• New narrower scaller tip
i00349 1
Band Pusher/Scaler (Guequierre) (RMO®)• Extra hard stainless steel
• Dual scaling surface
• One end has sharp curved scaling head, and serrated tip on the other
i00358 1
instrume
nts
www.rmortho.com 209
instrumentsSCHWEICKHARDT SPECIALIZED INSTRUMENTS
Order PackageNumber Contains
Cap Removal Instrument (RMO®)• To remove caps from convertible tubes
• Replaceable blade provides leverage when removing cap
• Tip of blade fits securely in arch slot of tube
• With 10 blades
• Stainless steel handle and blade
i00557 1
Replacement blades i00559 5
Modular Omega Plier (RMO®)• For adjusting the expansion or contraction of the Omega loop
on the Bimetric Distalizing Arch (Wilson®)
i00548 W 1
Replacement tips i00549 W 2
inst
rum
ent
s
210 www.rmortho.com
SPECIALIZED INSTRUMENTS AND AUXILIARIES
Order PackageNumber Contains
Ortho/Trace – Cephalometric Tracing Acetate• Smooth matte transparent surface –.003" (0.076mm)
• Gives sharp lines when tracing study radiographs
• Dimensionally stable, remains flat
• Rounded corners match standard 8" x 10" (20.32 x 25.4cm)rounded corner radiographs
J00086 100 sheets
Arch Marker• Arch morker indicates set-backs, loops, spring position.• Works well on wet or dry surfaces. Shows well on stainless steel.
Arch Marker Disposable J00095 100 markers
Arch Marker with Dispenser J00096 1 Dispenser; 100 markers
Bow Divider• For appliance and model measurements. Maximum 2" (5.08mm)
between points.
i00395 1
Golden Divider (Ricketts®)• Describes harmonious relations in the face, hand, tissue and
dentition
• Stainless steel – can be sterilized
i00394 1
(Instructions by request)
Fitzgerald X-Ray Holding Unit Rubber Bite BlockLarge i00364 2
Small i00365 2
instruments
instrume
nts
www.rmortho.com 211
RMO® has been the leader for over 70 years in providingthe orthodontic market worldwide with the highest qualityproducts and services.RMO®/SCHWEICKHARDT instruments are made 100% inGermany with selected high-grade raw materials and byexpert craftsmen providing high quality and precision toensure routine orthodontic procedures are more efficientfor you and your staff.Our promise to you is your investment in these superiorinstruments will provide reliable service for many years.
Warranty• All RMO®/SCHWEICKHARDT Instruments are fully guaran-teed against corrosion and separation of cutting insertsfrom the instruments for 5 years from the purchase date.(All RMO/ Ascent Instruments carry a one year warranty oncorrosion resistance and manufacturing defects.)• All RMO®/ SCHWEICKHARDT Instruments are fully guaran-teed for the life of the instrument to be free of defects inmaterials and workmanship.• All RMO®/ SCHWEICKHARDT Instruments, if misuse, abuseor failure to properly maintain or care for the instrumentswill void all above warranty claims
Return• All RMO® Instruments, which are unused, unopened andin the original package maybe returned for full credit ofthe purchased price within 90 days of invoice.• All RMO® Instruments, if defective, and not misused or tampered with in any manner, maybe return to RMO, Inc within the purchase period of 90 days for repair or at our option, replacement or refund of the purchase price.
RepairFor RMO®/ SCHWEICKHARDT Instruments outside the war-ranty, call RMO® customer service or your sales represen-tative with recommendation for repair.RMO® customer service number is 1-800-RMO-ORTHO.
Recommendation for Care and Maintenance ofRMO®/Schweickhardt InstrumentsThese Instruments are designed to provide long and faith-ful service. To protect your investment and ensure the reli-able service for a long time, please follow the recom-mended maintenance and care.All new instruments should be brushed with soap andwater, rinsed, dried and run through the entire sterilizationprocess prior to use.
Disinfecting & CleaningAll instruments should be disinfected and cleaned imme-diately after being used to remove debris, blood and toavoid drying of these contaminants on the surfaces of thepliers.
• Chemical Disinfection, if this method is the choice, wesuggest using a quality Alkaline product (Rust Inhibitor). Thesolution needs to be prepared every day exactly in thesame concentration. Make sure to dip the instrument intothe solution only after complete dissolution of the concen-trated chemical. Scrub the instrument tips with plasticbrush if necessary. Don’t soak the instrument for an extend-ed period of time. The solution’s temperature should notexceed 25˚C (78˚F).• Ultrasonic Cleaning Device. Please use a high qualitynon-aggressive ultrasonic solution with rust inhibitors and PHneutral. Extended cleaning time with acidic chemicals willdestroy your valuable instruments very quickly.• Rinse the instruments with Water (the use of distilled ordeionized water will provide further protection against rustand discoloration) immediately after disinfection andcleaning using methods above dry them carefully with
towel or compressed air to avoid water staining. If thesesteps are not followed properly, the instruments may besubject to corrosion or discoloration in the sterilizer.
SterilizationSterilize the instrument in an open position. Follow theinstructions of the manufacturer of the units. Make surethat no moisture is sealed in the bag.• Autoclave Sterilization: Recommended to extend thelifetime of the instrument.• Dry heat Sterilization:
- May shorten the life of the instrument especially with insert.
- Plastic handle may distort or discolor.• Cold Sterilization: refer to instructions of the Disinfectionand Cleaning section.Dry heat sterilization is acceptable up to 185˚C (395˚F);higher temperature may affect the hardness and lead todiscoloration of the instrument.
Maintenance and LubricationDefective and corroded instruments need to be eliminat-ed; otherwise corrosion may be transferred to other instru-ments during sterilization. Joints, inserts and ratches ofinstruments have to be treated with paraffin.Tips to lengthen the lifetime of your instrument:
• Applying a light coating of silicone spray to the hingearea every few weeks is recommended. The silicone willhelp promote smooth operation and clean appearance.• Don’t dry-heat sterilize the instruments with plastic handles, as it will tend to distort and discolor the plastic.• Ultrasonic devices tend to loosen-up the brazed parts(insert) and round-off sharp edges sooner due to the vibra-tion generated by the machine.• All cutters should be resharpened and reconditionedevery 6-9 months.• Warranty does not cover routine maintainence, sharpening or reconditioning.
Warranty for RMO/Schweickhardt Instruments
inst
rum
ent
s
212 www.rmortho.com
Ascent™ Instruments are manufacturedusing a state-of-the-art process. Highlyskilled technicians carefully monitor theproduction, insuring the closest tolerancesare met while providing you with the high-est quality. This assures consistent handlingand precise tolerance.
• Ascent ™Instruments aremanufactured using theforging process, toensure stronger instrument,which will last for a longertime then other manu-facturing proceses.
• Ascent™ instrumentsare made using 400series surgical-gradestainless steel (Cutters)and German surgicalstainless steel for thenon-inserted pliers.
Combined hard-ness exceeding60 Rc with highcorrosion resis-tance. This willprovide dura-bility andwithstand allsterilizationmethods formany years.
• Ascent™instrumentsare madefrom purehigh gradesurgical stain-less steel.Therefore,these instrumentsdon’t need to be chrome plated.They don’t have the risk of
the chrome plate peeling off during thesterilization processes.
• Ascent™ inserted instruments have cut-ting inserts which are made from 400 seriesAmerican surgical stainless steel with hardness up to 70 Rc and are permanent-ly brazed. This will ensure a long cuttingand non-corrosive life.
• Ascent™ instruments are ergonomicallydesigned to prevent carpel tunnel and theentire instument line provides a consistentweight and feel.
ascent™instruments
213www.rmortho.com
instrume
nts
instrumentsASCENT™ UTILITY PLIERS
Order PackageNumber Contains
How Plier - Straight• .093 ball
• Matching serrated pads assure a firm, postitive grip.
• Rounded tips for patient comfort and safety
• 3/32” diameter pads
T00110 1
How Plier - Curved• Efficient utility plier with serrated beaks for a firm grip
• The 45˚ angled tips allow access for hard to reach areas
T00111 1
Weingart Plier• Serrated tips hold wires firmly at a convenient working angle
• Tapered beaks fit easily between brackets
T00158 1
inst
rum
ent
s
214 www.rmortho.com
instrumentsASCENT™ WIRE BENDING PLIERS
Order PackageNumber Contains
Bird Beak Plier• Versatile plier for working with round wire up to .030”
• Round and pyramid beaks are smooth to prevent wire scoring
• Can also be used to form springs
T00139 1
Light Wire Plier• Designed for working with small wires and forming wire springs
• Tapered beaks make it easy to bend small diameter loops
• Bends wires up to .020”
T00140 1
Cinch Back Plier• The latest design for forming and cinching round or rectangular
wire up to .028”
• Serrated tips are tapered to a fine point allowing access to hard to reach areas
T00157 1
3-Jaw Plier• Precision tips for accurate wire and clasp adjusting and con-touring
• Also excellent for bending of orthopedic appliances
• Superior strength for wires up to .030”
T00200 1
Wire Contouring Plier• Smooth working area is ideal for forming and contouring arch-wires
• Useful in placing accentuated curves in wires
• Excellent plier for forming Nickel-Titanium archwires
T00203 1
instrume
nts
www.rmortho.com 215
instrumentsASCENT™ WIRE BENDING PLIERS
Order PackageNumber Contains
Optical Plier• Round and concave beaks bend round or rectangular wire
• Firm grip that will not nick wire
• Bends wires up to .020”
T00207 1
Stop Plier• Special design makes 1mm “V” bends to shorten archwires or
provide a positive stop
• Excellent for placing stops in Nickel-Titanium wires
• For round and rectangular wires up to .022”
T00220 1
Loop Forming and Closing Plier (Nance Style)• Precision loop forming with four step tip (3, 4, 5, and 6mm)
• Excellent for wires up to .022”
• Beveled edges prevent wire scoring and one serrated beak prevents wire slippage
T00230 1
Tweed Loop Forming Plier• Convex/concave beak makes precise Omega loops
• Tip has 3 forming sections: .045”, .060”, and .075”
• Etched tip surfaces prevent wire slippage
T00352 1
Replacement tip T00352t 1
Lingual Arch Forming Plier• Plier makes consistent and repeatable bends
• Forms double-back and triple-back bends in .030” and .036” wire for use with lingual sheaths
T00410 1
Rectangular Arch Forming Plier (Tweed Style)• Ideal for forming square or rectangular archwires
• Beveled edges prevent scoring of archwire
• Bends wires up to .022”x .028”
T00810S 1
inst
rum
ent
s
216 www.rmortho.com
instrumentsASCENT™ CUTTERS
Order PackageNumber Contains
Pin and Ligature Cutter• 7˚ cutting angle
• Cutting capacity up to .015” soft wire
T01001 1
Mini Pin and Ligature Cutter• Fine tips to easily access hard to reach areas
• Cuts wire ligatures, pins and elastics
• Maximum cutting capacity: soft wire up to .012”
• 7˚ cutting angle
T01002 1
Micro Pin and Ligature Cutter• Compact tip size allows easy access to tight interbracket areas
• Super sharp, diamond honed edges are effective for cutting all soft wires, pins and elastics up to .012”
• 7˚ cutting angle
T01021 1
instrume
nts
www.rmortho.com 217
instrumentsASCENT™ CUTTERS
Order PackageNumber Contains
Distal End Cutter• Safety hold is ideal for cutting wires within the patient’s mouth
• Plier shear-cuts hard wires close to the buccal tube and holds loose wire
• Maximum cutting capacity: archwires up to .022” x .028”
T01016 1
Distal End Cutter (compact tip)• Compact tip for easier access
• Safety hold is ideal for cutting wires within the patient’s mouth
• Plier shear cuts hard wires close to the buccal tube and holds loose wire
• Maximum cutting capacity: archwires up to .022”x .028
T01016S 1
Distal End Cutter (compact tip with long handle)• Small Distal End Cutter with safety hold
• Has longer handles than T01016S
T01016L 1
Hard Wire Cutter• 15˚ cutting angle for easy intraoral access
• The extra strong edges make it one of the most popular cutters
• Designed to cut all archwires
• Cuts archwires up to .022” x .028”
T01000
Hard Wire Cutter• Heavy duty cutting surface easily cuts wires and pins up to .022”
x .028”
T07001 1
inst
rum
ent
s
218 www.rmortho.com
instrumentsASCENT™ LIGATING PLIERS/LIGATURE REMOVAL
Order PackageNumber Contains
Force Module Separator• Designed for easy placement of elastomeric ligatures and
separating elastics
T01010 1
Mathieu Wide-Tip• Mathieu-style needle holder with serrated tips
• Positive locking ratchet permits instant opening and closing’
• Very useful in ligating
T00501 1
Mathieu Hole-Tip• Mathieu-style needle holder with groove at tips for non-slip
placement of elastic ligatures and other intraoral elastics
T00504 1
Synergy Ligature Remover• Designed to fit in-between tie wings
• Small, rounded, 45˚ angle tip
• Easy access to anterior and posterior teeth
T00520 1
instrume
nts
www.rmortho.com 219
instrumentsASCENT™BOND PLACEMENT TWEEZERS/REMOVERS
Order PackageNumber Contains
Direct Bond Bracket Holder• Unique reverse action tweezer with finely serrated beaks for a non-slip
grip
• Easy release of both metal and plastic direct bond brackets
• Fits narrow to wide twin
T00100 1
Direct Bonding Tweezer, Self-Locking w/Thin Tips• Self-locking action
• Ideal for posterior bracket placement
• Thin tips to fit between bracket wings and base
• Recommended for use with the RMO® Bondable Lingual Retainer
T01102 1
Direct Bond and Cement Remover -Straight• Precision grooved tips wedge between the bracket base and the tooth
surface to safely and easily remove brackets.
T00346 1
Replacement Tip T00346t 2
Direct Bond Remover - Angled• Quickly and safely removes direct bond brackets
• Has 60˚ angle to allow better access to anterior and posterior brackets.
T00344 1
inst
rum
ent
s
220 www.rmortho.com
RMO® has been the leader for over 70years in providing the orthodontic marketworldwide with the highest quality prod-ucts and services. Our promise to you isyour investment in these superior instru-ments will provide reliable service formany years.
WarrantyAll RMO®/ Ascent™ Instruments carry a oneyear warranty on corrosion resistance andmanufacturing defects.• All RMO®/ ASCENT™ Instruments are fullyguaranteed to be free of defects in mate-rials and workmanship.• All RMO®/ASCENT™ Instruments, if mis-use, abuse or failure to properly maintainor care for the instruments will void all above warranty claims
Return• All RMO®/ASCENT™ Instruments, whichare unused, unopened and in the originalpackage maybe returned for full credit of the purchased price within 90 days ofinvoice.• All RMO® Instruments, if defective, andnot misused or tampered with in any man-ner, may be returned to RMO, Inc withinthe purchase period of 90 days for repairor at our option, replacement or refund ofthe purchase price.
RepairFor RMO®/ ASCENT™ Instruments outsidethe warranty, call RMO® customer service,your sales representative or your local distributor for repair recommendations.RMO® customer service number is 1-800-RMO-ORTHO in the US only.
Recommendation for Care andMaintenance of RMO®/Ascent™InstrumentsThese Instruments are designed to providelong and faithful service. To protect yourinvestment and ensure the reliable servicefor a long time, please follow the recom-mended maintenance and care. All newinstruments should be brushed with soapand water, rinsed, dried and run throughthe entire sterilization process prior to use.
Maintenance and LubricationDefective and corroded instruments needto be eliminated; otherwise corrosion maybe transferred to other instruments duringsterilization. Joints, inserts and ratches ofinstruments have to be treated with paraffin.Tips to lengthen the lifetime of yourinstrument:• Applying a light coating of silicone sprayto the hinge area every few weeks is recommended. The silicone will help promote smooth operation and cleanapperance.• Don’t dry-heat sterilize the instrumentswith plastic handles, as it will tend to distort and discolor the plastic.• Ultrasonic devices tend to loosen-up thebrazed parts (insert) and round-off sharpedges sooner due to the vibration gener-ated by the machine.• All cutters should be resharpened andreconditioned every 6-9 months.• Warranty does not cover routine main-tainence, sharpening or reconditioning.
Warranty for RMO/Ascent™ Instruments
equipment
diagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnosticsdiagnostics
224
WELDER
www.rmortho.com
eq
uip
me
nt
Plug PatternJ00059 Japan 100V, 50HZ
J00060 North America 110-125V, 60HZ
J00643 Australia 220-250V, 50-60HZ
660 Multi-Purpose WelderThe 660 Multi-Purpose Welder is a small, versatile, economical chairside unit createdto fulfill the multi-purpose requirements of appliance fabrication. It occupies mini-mum counter space and its light weight makes it appropriate for chairside or mobileuse. Electrodes align automatically and accessories add versatility to appliance fab-rication. Blue color only.
Electrical, size and weight data
• Solid state circuitry
• Size: 6 1/2" wide x 10 1/2" deep x 6 7/8" high (16.5cm x 26.7cm x 17.4cm)
• Net weight 8lbs. 12 oz. (4.0 kg)
• Shipping weight, 13lbs. (5.9 kg)
Functions
• Welds with four welding heats and self-centering electrodes
• Electro-solders with turret carbon tip and cables
• Anneals with plug-in jack
• Heat-tempers and stress-relieves with cables
Annealing Soldering Spot Welding Heat-tempering
equipment
225www.rmortho.com
WELDER ACCESSORIES, AUXILIARIES eq
uipm
ent
Order PackageNumber Contains
Carbon tip for auxiliary cables H00083 2
Metal tip & vise for auxiliary cables H00091 1
Metal tip & carbon tip holder for auxiliary cables H00092 1
Lower ball electrode H00101 1
Lower soldering electrode H00102 1
Lower anvil electrode H00103 1
Lower pointed electrode H00104 1
Upper grooved electrode H00105 1
Upper electrode for carbon tip H00106 1
Upper blunt electrode H00107 1
Upper pointed electrode H00108 1
Carbon tip; use with H00106 electrode H00109 3
Upper turret with electrodes H00112 1
Lower turret with electrodes H00113 1
Fuse for J00060, J00059 H00500 1
Fuse for J00641, J00642, J00643, J00644 H00501 1
Wrench for electrodes H00509 2
White knob for 660 Welder H00506 1
Miscellaneous Accessories 506-600-620 Welder
Copper turret assembly H00018 1
Upper pointed electrode H00044 1
Lower pointed electrode H00043 1
Universal Electrodes Extra long-cut, bend to shape for older welders
Upper H00035 2
Lower H00036 2
equipment
eq
uip
me
nt
226 www.rmortho.com
WELDER ACCESSORIES, AUXILIARIES
Order PackageNumber Contains
Auxiliary Cables• For auxiliary functions of soldering, annealing, heat-tempering and stress-relieving
with RMO® equipment
• Cables, complete with brass tips, vise tip and carbon soldering tip
J00431 1 pair
Annealing JackJ00432 1
Auxiliary Plug-in Vise• Replaces one cable when a stationary grip is required on wire
to solder on an accessory
• Two vises clamp arch wire
J00433 1
Heat-Treat TableJ00427 1
Replacement Vise AssemblyH00507 1
Sandpaper Disc for 660 Welder• Prevents debris from falling into the auxiliary receptacles
• Used to clean soldering tips of dried flux and solder. Place on top of welder under auxiliary plug-in units
H00045 5
equipment
227www.rmortho.com
WELDER ACCESSORIES, AUXILIARIES eq
uipm
ent
Order PackageSize Number Contains
RMO® Silver Solder
Rectangles 3.1mm x 4mm H00116 100 pieces3.1mm x 6mm H00117 100 pieces
Bar Strips 0.6mm x 3.0mm H00021 4 stripsStandard x 3" (7.6cm)
Heavy (for commercial lab equipment)1.0mm x 3.0mm H00020 4 stripsx 3" (7.6cm)
Wire, 5 pennyweight (.25 oz.) spool 28 ga. - .013" H00025 1 spool
25 ga. - .018" H00024 1 spool
22 ga. - .025" H00119 1 spool
20 ga. - .032" H00049 1 spool
Silver solder melts at 1125° F (607°C)
Auxiliaries for solderingTrue-Chrome® Flux
Paste Flux for flame soldering, 1oz. J00040 1
Fluid Flux for electro-soldering, 1 oz. J00041 1
(not for flame soldering)
Bridging Wire• Dead Soft, 6 ft. coil
• For spot-welding broken appliance parts together, prior to electro-soldering
.010" x .022" H00030 1(0.25mm x 0.56mm)
equipment
www.rmortho.com
United StatesRMO Corporate Office/PlantP.O. Box 17085, Denver, Colorado80217-0085Tel: 1 800 525 6375 Fax: 1 303 592 8209
RMO Diagnostic ServicesP.O. Box 7955Canoga Park, California 91309-7955Tel: 1 800 458 8884Tel: 818.704.8198Fax: 818 704 1182
RMO EuropeParc d’InnovationRue Geiler de Kaysersberg67400 Illkirch GraffenstadenStrasbourg, FranceTel: (33) 3 88 40 67 40Fax: (33) 3 88 67 96 95
JapanRM Morita Corporation23 Kanda-Awajicho 2–ChomeChiyoda Ku, Tokyo 100, JapanTel: 81 3 3251 4631Fax: 81 3 3255 4090
AustraliaAB Orthodontics Pty LtdTel: |613| 9650-2526Fax: |613| 9654-5959
EuropeAustriaGerhard Planer & Co GmbHTel: (43) 1 406 8134Fax: (43) 1 408 2219
BelgiumModern Orthodontic SuppliesTel: (32) 23 76 22 22Fax: (32) 23 76 55 55
DenmarkOrtodonti Services APSTel: (45) 56 14 17 53Fax: (45) 56 14 33 97
FinlandPlandent OyTel: (358) 90 759 05 200Fax: (353) 90 759 05 222
GermanyDentalline GmbHTel: (49) (0) 72 31 97 81 0Fax: (49) (0) 72 31 97 81 15
GreeceJ. Tsaprazis & Co.Tel: (30) 1 522 6937Fax: (30) 1 523 4196
HollandOrtholine BVTel: (31) 020 416 58 50Fax: (31) 020 416 58 51
ItalyNovaxa Ortodonzia SRL Tel: (39) (0) 2 660 161 23Fax: (39) (0) 2 660 161 28
NorwayNorsk Dental Depot A/STel: (47) 22 07 27 27Fax: (47) 22 07 27 97
SpainIberica de OrtodonciaTel: (34) 96 385 7007Fax: (34) 96 384 7603
SwedenOrtopro ABTel: (46) (0) 31 81 00 35Fax: (46) (0) 31 81 46 55Plandent ABTel: (46) (0) 8 97 97 30Fax: (46) (0) 8 88 55 97
United KingdomRMO EuropeFreephone: 0800 169 83 51Freefax: 0800 169 87 01
AsiaHong KongTesco Dental Supplies Ltd.Tel: (852) 2544 2729Tel: (852) 2854 1582
IndiaDenta CareTel: (91) 11 85 20458Fax; (91) 11 85 56420
IndonesiaFondaco Tel: (62) 21 633 0438Fax: (62) 21 633 0441
KoreaIl San Trading Corp.Tel: (82) 2 753 7722Fax; (82) 2 753 7755
PhilippinesPROSTel: (632) 526 2911Fax: (632) 526 0896
SingaporeFondaco PTE Ltd.Tel: (65) 6 392 2806Fax: (65) 6 392 1296
TaiwanSumten Corp.Tel: (886) (22) 302 3033Fax: (886) (22) 302 3036
ThailandVSAT M Co LtdTel: +66 2 571 3557Fax: +66 2 571 3547
MoroccoGeneral OrthodonticsS.A.R.L.Tel: 011 212 22 260809Fax: 011 212 22 298978
Middle EastEgyptMedi-Tech Trading SAETel: (202) 270 6841Fax: (202) 404 9999
IsraelSmart-Orthodontic Services,Ltd.Tel: (972) 3 752 2272 Tel: (972) 3 752 2273
JordanBasamat Trading Est. Tel: (962) 6 567 5899Fax: (962) 6 568 8461
KuwaitDenta Est Tel: (965) 571 9264Fax: (965) 241 2675
Saudi ArabiaAl Razi Medical Supplies Tel: (966) 2 651 9097Fax: (966) 2 651 8598
SyriaAmessa Dental Supply Co Tel: (963) 31 426 669Fax: (963) 31 411 355
TurkeyYuksel LTD STI Tel: (90) 312 433 1604Fax: (90) 312 433 4201
U.A.E.The Orthodontic CenterTel: 011 971 2 664 4990Fax: 011 971 2 665 4430
South America /MexicoArgentinaGrimberg DentalesImport/Export SRLBuenos AiresTel: (541) 1 4821 4114Fax: (541) 1 4773 2318CordobaTel: (54) 351 422 2181Fax: (54) 351 422 3851
BrazilN & F Ortho DentalTel/Fax: 55 (19) 3294-5813
ChileOrtotek Ltda. Tel: (56) 2 232 3093Fax: (56) 2 232 2787
ColombiaDentales Bogota Ltda.Tel: (57) 1 648 2590Fax: (57) 1 285 4820
MexicoRep. Ortodoncicas S.A. de CVTel: (52) 5 559 02 08Fax: (52) 5 575 6283
PeruSideral Business, S.A.Tel: (51) 1 451 6010Fax: (51) 1 451 6010
VenezuelaRepresentaciones G.Mendoza Tel: (58) 212 483 4351Fax: (58) 212 481 9525
AfricaFTO Proprietary LTD Tel: (27) 11 609 8722Fax: (27) 11 542 4930
www.rmortho.com
termsandconditionsGeneral Terms and Conditions
All prices, terms and conditions applicable to orders of RMO® products (“RMO® Products” orthe “Products”) are subject to change without notice.
All orders placed with an RMO® Sales Representative or directly with RMO®, are subject toacceptance and approval at our home office in Denver, Colorado in accordance with theseterms and conditions and such other terms and conditions as may be in effect on the date anorder is received.
All orders placed with an RMO® subsidiary or affiliated company at their national offices inAustralia, France and Japan are subject to acceptance and approval by such RMO® sub-sidiary or affiliated company in accordance with their published terms and conditions or suchother terms and conditions as may be in effect on the date an order is received.
All orders placed with authorized RMO® dealers at their offices (to be filled by such dealers)are subject to acceptance and approval by such RMO® dealers in accordance with theirpublished terms and conditions, including prices, and such other terms and conditions as saiddealers may specify.
Product Modification orDiscontinuanceBecause orthodontic techniques and materi-als change and because its product line isconstantly being improved, RMO® reservesthe right to improve, modify, or discontinueProducts at any time, or to change specifica-tions without notice.
PricingRMO® reserves the right to change prices atany time. Residents of Canada will be billedin Canadian dollars. All other customers willbe billed in United States dollars.
Shipping
All prices are FOB Denver, Colorado. Shippingand handling charges will be shown as a sep-arate item on the invoice. All products areshipped FOB Denver, Colorado, except ship-ments to Canada. Title to goods shipped toCanada will pass when received in Canada.
Ordering
There is a minimum $25.00 (U.S. dollars)order.
RMO® does not ship COD.
PaymentA. Net within thirty (30) days from date of
shipment.
B. Currency: Canadian dollars for all Canadaresidents. United States dollars for all othercustomers.
C. Export outside of the United States orCanada: Unless otherwise indicated, netcash in United States dollars within sixty (60)days from date of shipment.
Return PolicyRMO® Products may be returned for creditwhen the following conditions are met:
1. Products being returned that have beenexposed to blood, body fluids, or body tis-sue must be deontaminated prior to returnper OSHA Section 29 CFR 1910.1030.
2. Products must be returned within ninety(90) days of shipment,unopened and in the originalpackaging.
3. Products returned must be current,unused, and in resalable condition.
4. Products returned must be accompaniedby an invoice and letter or other writingexplaining the specific reason or reasonsfor the return.
5. Returned Products should be shipped pre-paid directly to: RMO®, Inc., Attention:Receiving Dept., 620 West Colfax Avenue,Denver, Colorado 80204.
6. Returns must be sent shipping charges orpostage prepaid and insured for fullinvoice value. RMO® cannot accept liabili-ty for loss of or damage to Products duringshipment.
7. At the option of RMO®, certain Productsreturned for credit may be subject to arestocking charge.
www.rmortho.com
termsandconditions
Exceptions to the 90 day returnprivilege are:A. “Ortho-Jel®” is a non-returnable Product.
All shipments of this Product are consid-ered firm and final.
B. Custom-made or special non-standardproducts, such as, but not limited to “S”numbers, are not returnable.
All prewelded attachments includingstandard, special placement, angula-tions and modified or incompletematerials, are not returnable.
C. Band and bonding-base trades are notreturnable.
D. All books, Millenium® products, softwareproducts, and adhesive products arenot returnable.
RMO WarrantyUnless otherwise provided, and exceptwhere the laws and regulations of a par-ticular nation concerning warranties can-not be waived or excluded by agreement,RMO makes no warranty of any kind,expressed or implied, except that theProducts manufactured and sold by RMOshall be free from defects in materials andworkmanship. Products distributed but notmanufactured by RMO are sold only withthe warranty provided by the manufactur-er.
ALL OTHER WARRANTIES, INCLUDING ANYIMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-TICULAR PURPOSE, ARE HEREBY EXPRESSLYDISCLAIMED. The buyer assumes all riskand liability resulting from the use of prod-ucts sold by RMO whether used singly or incombination with other products. TheBuyer likewise assumes all risk and liabilityresulting from any misuse or Buyer modifi-cations of any of said Products. RMO shallnot be responsible for consequentialdamages. The extent of theliability of RMO shall be a credit of thepurchase price or replacement of theproduct, at the option of RMO.
For more information and ordering:
Please call 1-800-RMO-ORTHO or 303-592-8200.
www.rmortho.com
CE/ISOandecommerceCE/ISO for 2002Denver (RMO®) and Strasbourg (RMO® Europe) were both certified in ISO 9001, EN46001 and Medical Device Directive 93/42/EEC (Annex II), while Canoga Park (RMODiagnostic Services) was certified in ISO 9001 and EN 46001
Registered TrademarksRMO, Rocky Mountain, 3D, Penta-Morphic, Ricketts, Bendaloy, Bioprogressive,Dimension4, Elgiloy, Mini-Taurus, Synergy, Taurus, The Millenium Society, BoneRemodeler, Clark, The Dentist Athletes Hall of Fame, Denzyme, Dimension 4, E-Ceph,Early Treatment Orthodontics, E-cephalometrics, Econoline, Electro-Scribe, FacialPrint, Fixed/Removable, Grace, High Speed HS, Integra, Jiffy Orthodontic Evaluation,JOE, LAD, LUXI, Millenium, MyTGuard, Northern Lights, Ortho-Jel, Ortho-Print, Orthonol,Orthopedic Incline, Precision, Quasar, Qwik-Wing, Spring Gear, SynergisticOrthodontics, Therma-Loy, Trimorphic, Triple Control, Trombone, Tru-Chrome, VersaT,Wilson, Kussick Orthopedic Incline, Integra-Bond, Ascent, Modular Orthodontics.
United States Patents713826, 708753, 1310522, 0588967, 458562, 588961, 458562, 69228472.9,458562, 0588961, 458562, 2579431, 0588961, 0589661, 458562, 5470228,5746592, 6086364, 5871350, 4854866, 4819316, 4354834, 5127828, 5158452,5362232, 5616026, 4975052, 5707231, 5443384, 5160261, 5277581, D256950,5890891, 5810583, 5044945, 5779470
Some patents listed have international counterparts. Other U.S. and foreign patents pending.
www.rmortho.comOne new development we are very excited about is our new website. We are proudof our new site that covers product ordering, new developments in orthodontics,upcoming events and seminars, Our web address is www.rmortho.com—please visitus and order online.
Copyright© 2002 RMO, Inc. All rights reserved.
index
233
www.rmortho.com
Arch Markers 211
Ascent 3-Jaw Plier 215
Ascent How Plier Curved 214
Ascent Bird Beak Plier 215
Ascent Cinch Back Plier 215
Ascent Direct Bond and Cement Remover 220
Ascent Direct Bond Bracket Holder 220
Ascent Direct Bond Remover 220
Ascent Direct Bonding Tweezer 220
Ascent Distal End Cutter 218
Ascent Force Module Separator 219
Ascent Hard Wire Cutter 218
Ascent How Plier Straight 214
Ascent Instruments 213
Ascent Light Wire Plier 215
Ascent Lingual Arch Forming Plier 216
Ascent Loop Forming and Closing Plier 216
Ascent Mathieu Hole-Tip 219
Ascent Mathieu Wide-Tip 219
Ascent Micro Pin and Ligature Cutter 217
Ascent Mini Pin and Ligature Cutter 217
Ascent Optical Plier 216
Ascent Pin and Ligature Cutter 217
Ascent Rectangular Arch Forming Plier 216
Ascent Stop Plier 216
Ascent Tweed Loop Forming Plier 216
Ascent Weingart Plier 214
Ascent Wire Contouring Plier 215
Auxiliary Edgewise Buccal Tube 143
Auxiliary Edgewise Max/Man Brackets 143
Band Seating Lug 57
Band Trays 56
Bands Truform Bands 42
Bands Truform Man 1st and 2nd Bicuspid 50
Bands Truform Man 1st R and L 45
Bands Truform Man 1st Uni 47
Bands Truform Man Central and Lateral 55
Bands Truform Man Cuspids 52
Bands Truform Max 1st and 2nd Bicuspid 49
Bands Truform Max 1st R and L 44
Bands Truform Max 1st Uni 46
Bands Truform Max Central 54
Bands Truform Max Cuspids 51
Bands Truform Max Lateral Uni R and L 53
Bands Truform Max/Man 2nd R and L 48
Bendaloy Preformed Natural Arches 182
Bendaloy Straight Lengths 182
Bioprogressive Man Buccal Tubes 148
Bioprogressive Max Buccal Tubes 146
Bite Blocks 212
Bondable Lingual Retainer 191
Bonding Bases 80
Bow Divider 212
Bracket Types 64
Brackets Gingivally Offset 65
134
A B
www.rmortho.com
Cap Removal Instrument 211
Clark LAD Planner 12
Clark Trombone 11
Coil Spring 20
Conversion Tables 194
Diagnostics 2
Eceph 3
Send-In Service 3
Dimension 4 Bioprogressive Man Brackets 141
Dimension 4 Bioprogressive Max Brackets 140
Drive Tube 38
Elastics, Bulk 31
Elastic Ligature Thread 33
Elastomeric Ligatures 32
Elastomeric Rotation Wedges 32
Elastomeric Tie Thread 33
Elgiloy Anterior Torquing Retractor 171
Elgiloy Arch Blanks 171
Elgiloy Auxiliary Springs 174
Elgiloy Bioprogressive Auxiliaries 173
Elgiloy Coil Springs 175
Elgiloy Cuspid Retractor Spring 173
Elgiloy Double Delta Space Closure Arch Leveler 172
Elgiloy Hawley Arch Selector 176
Elgiloy Hawley Labial Retainer Form 176
Elgiloy Ideal Buccal Section 173
Elgiloy Man Lingual Retainer 176
Elgiloy Max Anterior Torquing Retractor 171
Elgiloy Max Anterior Torquing Retractor 171
Elgiloy Max Quad Helix 174
Elgiloy Penta-Morphic Arch Selector 169
Elgiloy Penta-Morphic Arches 169
Elgiloy Preformed Ideal Arches 170
Elgiloy Preformed Natural Arches 170
Elgiloy Straight Lengths 177
Elgiloy T Series 173
Elgiloy Utility Arches 169
Elgiloy Wire 168
Energy Pak Elastics 20
30
EnergyChain Elastics 31
Etching Gel 163
Expansion Screws 192
Facebow Penta-Form 35
Facebow Penta-Form Friction Stop 35
Facebow Penta-FormLoop Style 35
Facebow, Ricketts 35
Golden Divider 212
Grace Brackets 131
C
D
E F
G
www.rmortho.com
Grace Pre Low Pro Edge Man Brackets 133
Grace Pre Low Pro Edge Man Tubes 133
Grace Pre Low Pro Edge Max Brackets 132
Grace Pre Low Pro Edge Max Tubes 132
HeadGear 37
Impression Trays 33
Integra Brackets 129
Integra Stan Edgewise Man Brackets 130
Integra Stan Edgewise Max Brackets 130
Kussick Grinding Cabinet 9
Kussick Headgear 9
Kussick Maxillary Arch 9
Kussick Orthopedic Incline 8
Kussick Tongue Retrainer 8
Ligatures and Separators 32
Light Wire Begg System 144
Light Wire Buccal Tubes 144
Light Wire Torquing Arches 144
Lingual Button 58
Lingual Buttons, Hooks, Eyelet 58
Lingual Hook 58
Lingual Tubes 155
Lip Bumper 35
Lug/Cleat 58
LUXI II 67
LUXI II Roth Preadjusted Straight Man Brackets 69
LUXI II Roth Preadjusted Straight Man Tubes 69
LUXI II Roth Preadjusted Straight Max Brackets 68
LUXI II Roth Preadjusted Straight Max Tubes 68
LUXI II Roth Preadjusted Straight Kits 69
LUXI II Ricketts Bioprogressive Man Brackets 71
LUXI II Ricketts Bioprogressive Man Tubes 71
LUXI II Ricketts Bioprogressive Kits 71
LUXI II Ricketts Bioprogressive Max Brackets 70
LUXI II Ricketts Bioprogressive Max Tubes 70
LUXI II Standard Edgewise Max/Man Brackets 72
Machine Milled Bioprogressive Man Brackets 139
Machine Milled Bioprogressive Max Brackets 138
Machine Milled Brackets 137
MiniTaurus Alexander Vari-Simplex Man Brackets 127
MiniTaurus Alexander Vari-Simplex Man Tubes 127
MiniTaurus Alexander Vari-Simplex Max Brackets 126
MiniTaurus Alexander Vari-Simplex Max Tubes 126
MiniTaurus Andrews Straight Wire Man Brackets 112
MiniTaurus Andrews Straight Wire Man Tubes 113
MiniTaurus Andrews Straight Wire Max Brackets 110
MiniTaurus Andrews Straight Wire Max Tubes 111
MiniTaurus Bench Bioprogressive Man Brackets 124
MiniTaurus Bench Bioprogressive Man Tubes 125
MiniTaurus Bench Bioprogressive Max Brackets 122
I
L
MK
H
www.rmortho.com
MiniTaurus Bench Bioprogressive Max Tubes 123
MiniTaurus Brackets 109
MiniTaurus RMO Version of MBT Man Brackets 120
MiniTaurus RMO Version of MBT Man Tubes 121
MiniTaurus RMO Version of MBT Max Brackets 118
MiniTaurus RMO Version of MBT Max Tubes 119
MiniTaurus Roth Straight Wire Man Brackets 116
MiniTaurus Roth Straight Wire Man Tubes 117
MiniTaurus Roth Straight Wire Max Brackets 114
MiniTaurus Roth Straight Wire Max Tubes 115
MiniTaurus Stan Edgewise Max Brackets 128
MiniTaurus Stan Edgewise Max Tubes 128
Miura Plastic Edgewise Max/Man 145
MonoLok2 Bonding Systems 160
Muscle Anchorage Appliance 27
MyTGuard Mouthguard 39
Nickel Titanium Coil Springs 165
Nickel Titanium Orthonal Natural Arches 162
Nickel Titanium Orthonol Reverse Vector Arches 164
Nickel Titanium Orthonol Superelastic Ideal Arches 163
Nickel Titanium Penta-Morphic Arches 162
Nickel Titanium Thermaloy Preformed Natural Arch 163
Ortho-Jel Alginate 34
Ortho-Trace 212
Orthopedic Face Mask 26
Piston Screw 192
Plastic Pocket Container 31
Preweld Position Guide 59
Retainer Boxes 193
RM Locks 191
Schweickhardt Arch Forming Plier 205
Schweickhardt Band Pusher 200
Schweickhardt Band Pusher/Scaler 210
Schweickhardt Band Seater 200
Schweickhardt Closing Loop Plier 204
Schweickhardt Contouring Plier 201
Schweickhardt Direct Bond Removing Plier 210
Schweickhardt Distal End Cutter 206
Schweickhardt Heavy Wire Cutter 207
Schweickhardt How Plier Curved 202
Schweickhardt How Plier Straight 202
Schweickhardt Instruments 198
Schweickhardt Ligature and Hard Wire Cutter 207
Schweickhardt Ligature Cutter 206
Schweickhardt Ligature Tucker 208
Schweickhardt Ligature Tying Plier 208
Schweickhardt Light Wire Plier 204
Schweickhardt Lingual Arch Forming Plier 204
Schweickhardt Loop Plier 203
Schweickhardt Miniature Cutters 206
Schweickhardt Module Placing Plier 208
N
O
P
R
S
www.rmortho.com
Schweickhardt Mosquito Hemostat 209
Schweickhardt Needle Holder 209
Schweickhardt Posterior Band Removing Plier 210
Schweickhardt Three Jaw Clasp Plier 205
Schweickhardt Utility Plier 202
Schweickhardt Utility Scaling Plier 210
Schweickhardt UtilityArch Forming Plier 203
Schweickhardt Wire Bending 204
Schwiekhardt Warranty 213
Seating Lug/Hook 58
Signature III Brackets 73
Signature III Bioprogressive Man Brackets 77
Signature III Bioprogressive Man Tubes 77
Signature III Bioprogressive Max Brackets 76
Signature III Bioprogressive Max Tubes 76
Signature III Roth Straight Wire Man Brackets 75
Signature III Roth Straight Wire Man Tubes 75
Signature III Roth Straight Wire Max Brackets 74
Signature III Roth Straight Wire Max Tubes 74
Signature III Ricketts Bioprogressive Man Brackets 77
Signature III Ricketts Bioprogressive Man Tubes 77
Signature III Ricketts Bioprogressive Max Brackets 76
Signature III Ricketts Bioprogressive Max Tubes 76
Signature III Standard Edgewise Max/Man Brackets 78
Space Maintainer Kit 27
Space Maintainer Open 27
Spring-Gear 36
Standard Edgewise Buccal Tubes 152
Standard Edgewise Buccal Tubes Man 153
Standard Edgewise Max/Man Brackets 142
Synergy Brackets 81
Synergy Anch Tech Pre Max/Man Brackets 102
Synergy Bench Bioprogressive Man Brackets 94
Synergy Bench Bioprogressive Man Tubes 95
Synergy Bench Bioprogressive Max Brackets 92
Synergy Bench Bioprogressive Max Tubes 95
Synergy Ricketts Classic Bioprogressive Man Brackets 88
Synergy Ricketts Classic Bioprogressive Man Tubes 89
Synergy Ricketts Classic Bioprogressive Max Brackets 86
Synergy Ricketts Classic Bioprogressive Max Tubes 87
Synergy Ricketts Orig Stan Bioprogressive Man Tubes 91
Synergy Ricketts Orig Stand Bioprogressive Man Brackets 91
Synergy Ricketts Orig Stand Bioprogressive Max Brackets 90
Synergy Ricketts Orig Stand Bioprogressive Max Tubes 90
Synergy Roth Straight Wire Man Brackets 84
Synergy Roth Straight Wire Man Tubes 85
Synergy Roth Straight Wire Max Brackets 76
Synergy Roth Straight Wire Max Tubes 76
Synergy Stan Edgewise Man Brackets 91
Synergy Stan Edgewise Max Brackets 91
Synergy Tri-Wing Broussard Max/Man Brackets 92
Synergy Trim Bioprogressive Brach Man Brackets 97
Synergy Trim Bioprogressive Brach Man Tubes 97
Synergy Trim Bioprogressive Brach Max Brackets 96
Synergy Trim Bioprogressive Brach Max Tubes 96
Synergy Trim Bioprogressive Doli Man Brackets 101
Synergy Trim Bioprogressive Doli Man Tubes 101
Synergy Trim Bioprogressive Doli Max Brackets 100
Synergy Trim Bioprogressive Doli Max Tubes 100
Synergy Trim Bioprogressive Meso Man Brackets 99
Synergy Trim Bioprogressive Meso Man Tubes 99
Synergy Trim Bioprogressive Meso Max Brackets 98
Synergy Trim Bioprogressive Meso Max Tubes 98
Tip Edge, Edgewise Buccal Tubes Man 150
Tip Edge, Edgewise Buccal Tubes Max 150
TruChrome Wire 183
TruChrome Adams Clasp 190
TruChrome Anterior Contour Arches 185
TruChrome Ball Retainer Clasp 190
TruChrome Closing Spring 190
TruChrome J Clasp 190
T
www.rmortho.com
TruChrome Ligature Wire 189
TruChrome Max Anterior Torquing 185
TruChrome Paralleling Spring 190
TruChrome Penta-Morphic Arches 184
TruChrome PG Cuspid Retraction Spring 189
Truchrome Preformed Ideal Arches 185
TruChrome Preformed Natural Arches 184
TruChrome Retracting Springs 189
TruChrome Straight Length Wire 186
TruCrome Auxiliary Ligature Tie Hook 189
Twin Arch Tube Uni Edgewise Max/Man 151
Twin Arch Tube Uni Edgewise Molar Tubes 151
VersaT Auxiliaries 105
VersaT Brackets 106
VersaT Roth Straight Wire Man Brackets 107
VersaT Roth Straight Wire Man Tubes 108
VersaT Roth Straight Wire Max Brackets 107
VersaT Roth Straight Wire Max Tubes 107
Weldable Buccal Hooks 58
Weldable Elastic Hook 58
Welder 660 226
Welder Accessories 227
Wilson 3D Adapter 23
Wilson 3D Bimetric Arch 19
Wilson 3D Buccal Tube 17
Wilson 3D DYS Module 24
Wilson 3D Lingual Arch 18
Wilson 3D Lingual Tube 12
17
58
Wilson 3D Maxillary Bimetric Distalizing Arch 9
Wilson 3D Multi-Action Mandibular Appliance 23
Wilson 3D Multi-Action Palatal Appliance 22
Wilson 3D Palatal Appliance 22
Wilson 3D Quad Helix 21
Wilson 3D Sectional 23
Wilson 3D Space Maintainer 24
27
Wilson 3D Space Regainer 27
Wilson 3D Transfer System 15
Wilson 3D Wilson/Dellehay Lingual Arch 25
Wilson 3D Wilson/Dellehay Preformed Arches 25
Wilson 3D Wilson/Dellehay Straight Lengths 25
Wilson Modular Omega Plier 211
Wilson Omega Adjustable Stop 20V
W