KARBURATOR - Održavanje i Simptomi Zaprljanog Karburatora Održavanje i Simptomi Zaprljanog Karburatora

7/26/2019 KARBURATOR - Odravanje i Simptomi Zaprljanog Karburatora Odravanje i Simptomi Zaprljanog Karburatora

1/39

Gorivo koje je stiglo do karburatora prolo je kroz flter pumpe za gorivo i/ili kroz flter koji se nalazi negde na dotoku goriva iz rezervoara. Takvo

proieno gorivo karburator alje u cilindar.

Glavni simtpom zaprljanog karburatora je lo odziv na gas nemogunost startovanja motora ili povremeno tucanje tokom vo!nje.

Odravanje karburatora:

"red sezonu ne bi bilo loe skinuti karburator odviti njegovu olju i oistiti dizne.

Kako se to radi?

#ada okrenete karburator naopakako videete $% ili vie ra &ora koji dr!e olju. 'dvijanjem ti( ra&ora razvojiete olju od karburatora. #ada to uradite

ono to se nalazi u olji izgleda ovako)

*a slici je obele!ena glavna dizna koju treba odvrnuti oprati u benzinu i produvati kompresorom. *akon ienja dizne vratiti je na mesto i zavrnuti olju.

"otom uzeti istu krpu provui je kroz karburator i obrisati ga +kao i olju, ili ga produvati na kompresoru. Takav karburator smatra se oienim i spreman

je za upotrebu do narednog zaepljenja dizne

"rincip rada popis njegovi( delova i nain telovanja nema potrebe objanjavati ponovo ve ga mo!ete proitati na sledeem linku)

(ttp)//---.skuteri.o...uzobjasnjenja/

01230T'1 slike uloga zamena simptomi pokvarenog varijatora425T61 0789:0 2zgled ulogasimptomi zaprljanog fltera i ienje#01;910T'1 odr!avanje i simptomi zaprljanog karburatora16761'01 plovak simptomi zaprljanog rezervoara#0


2/39

I start by removing the 2 phillips scres that hold the auto-enrichener on.


3/39

Once it is off, I make sure everything can move freely and clean it off with a little carb cleaner. arb cleaner harms some plastic so you may want to !ust get the metal parts with it

and wipe the rest.


4/39

I now remove the clamp and float bowl drain hose. lean it off and be sure it is not cracked or torn. "eplace if necessary.


5/39

#ow I spray the carb with carb cleaner to get rid of a lot of the grease and gunk.


6/39

"emove the carb top. $here is a gasket under it, inspect that and replace if it is damaged.


7/39

$ake out the spring and throttle valve assembly as well.


8/39

#ow I take out the % screws holding the float bowl in place.(ttp)//---.skuteri.o...ingmogkineza/

=H sportE4 evo radilicamultivarJ%.$gJbela centr.JT.?.sH pro replicabCegmore i bosna &CDdellorto p(bg @C black edition-Cdiz. F$FD....minarelli ?82 b 2catenejJ advace paljenje...malossi primar @D/%@torIue drive 0t(enaE4 evo race J=H -/c(ttp)//i$CF.p(otobuc...icanmojbok.jpg(ttp)//i$CF.p(otobuc...rri8=?BBKK%.jpg

0

"osted @A 3une $B@@ BC)DH "E +#-, cvele19 Radi 4um ko zmajodlicno uradjen !oso
http://www.skuteri.org/forum/index.php?/topic/2710-uspesan-tuning-mog-kineza/http://i298.photobucket.com/albums/mm248/cvele60/hurrican-mojbok.jpghttp://i298.photobucket.com/albums/mm248/cvele60/hurri%20prerada%202/hurriDSC00334.jpghttp://www.skuteri.org/forum/index.php?/topic/11590-karburator-odrzavanje-i-simptomi-zaprljanog-karburatora/page__view__findpost__p__220042http://www.skuteri.org/forum/index.php?/topic/11590-karburator-odrzavanje-i-simptomi-zaprljanog-karburatora/page__view__findpost__p__220042http://www.skuteri.org/forum/index.php?/user/965-cvele19/http://www.skuteri.org/forum/index.php?/user/965-cvele19/http://www.skuteri.org/forum/index.php?/topic/2710-uspesan-tuning-mog-kineza/http://i298.photobucket.com/albums/mm248/cvele60/hurrican-mojbok.jpghttp://i298.photobucket.com/albums/mm248/cvele60/hurri%20prerada%202/hurriDSC00334.jpghttp://www.skuteri.org/forum/index.php?/topic/11590-karburator-odrzavanje-i-simptomi-zaprljanog-karburatora/page__view__findpost__p__220042http://www.skuteri.org/forum/index.php?/user/965-cvele19/


9/39

;icilindrico

"rou!:4orum Eanijak osts:%FD$ $oined:BF3anuar BF %kuter:kee-aj AB &ilindar:sH sport 'us!u(:sH pro replica Karburator:dell @C Kva)ilo:E4 evo *ariomat:malossi multivar Ostalo:at(ena torIue...ma svasta ponesto... "araa:nis +r,ovina:J%

#ow I take out the % screws holding the float bowl in place.


10/39

&y bowl has some buildup, so I spray some carb cleaner in the bowl and let it sit.


11/39


12/39

#ow I take the pin out and remove the float.


13/39

e careful not to lose the little float needle.


14/39

"emove the float bowl gasket and spray the carb out with carb cleaner.(ttp)//---.skuteri.o...ingmogkineza/


0

"osted @A 3une $B@@ BC)DH "E +#4, cvele19 Radi 4um ko zmajodlicno uradjen !oso


15/39

;icilindrico


"emove the float bowl gasket and spray the carb out with carb cleaner.

&ake sure the gasket looks healthy, replace if necessary.


16/39

I unscrewed the main !et to make sure it isn't clogged or dirty and sprayed it out. I then reinstalled it.


17/39

(olding !ets up to a light will help you tell if it is clogged.


18/39

I then removed the idle speed screw and cleaned the screw and passage, then reinstalled. )ou may want to see how many turns it takes to get the idle screw all the way in, and

write that down. *hen reinstalling, turn the screw all the way in then back it out that number of turns.


19/39


20/39

#ow I do the same with the mixture screw.


21/39


22/39

#ow I remove the clip that holds !et needle and it's clip in the throttle valve.(ttp)//---.skuteri.o...ingmogkineza/


0

"osted @A 3une $B@@ BC)DA "E +#., cvele19 Radi 4um ko zmajodlicno uradjen !oso


23/39

;icilindrico


remove the clip that holds !et needle and it's clip in the throttle valve.


24/39

lean all of these parts then reassemble. e sure the & clip doesn't block the groove in the throttle valve when you put it back together.


25/39

#ow I let all of this sit overnight so the carb cleaner can work it's magic on the bowl.


26/39

$he carb cleaner has done it's work so I dump it out and wipe the bowl out.


27/39

I remove the drain screw and clean it and the opening with carb cleaner, then reinstall the screw.


28/39

+ut the bowl gasket back in place, making sure it is properly seated.


29/39

"einstall the float and float needle. #ow is a good time to check float height by measuring from the bottom of the carb to the bottom of the f loat which are both kinda the tops

since it's held upside down. ento wants a /2-/%mm float height.


30/39

"einstall the float bowl.


31/39

#ow I put the throttle valve back in the carburetor. #otice there is a long groove and a small ramp on the throttle valve. $he ramp is for your idle speed screw to contact, so aim

int toward the idle speed scew when installing.

0

#ow I put the throttle valve back in the carburetor. #otice there is a long groove and a small ramp on the throttle valve. $he ramp is for your idle speed screw to contact, so aim

int toward the idle speed scew when installing.


32/39


33/39


34/39

+ut the spring back in.


35/39

"einstall the carb top.


36/39

+ut the auto-enrichener back on.


37/39

In my case, make sure the cap for the oil in!ection port is in good shape.


38/39


39/39

"eattach the float bowl drain hose and clamp.

Documents

KARBURATOR - Održavanje i Simptomi Zaprljanog Karburatora Održavanje i Simptomi Zaprljanog Karburatora