15
LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

Embed Size (px)

Citation preview

Page 1: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LED Panel 28th February 2008

LED StandardisationLawrence Barling

Senior Technical ManagerThe Lighting Association

Page 2: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 2

~ Acronyms ~~ Acronyms ~

IEC – International Electrotechnical Commission PRESCO – Lamp working group NP – New work item proposal CD – Committee Draft CDV – Committee Draft for Vote FDIS – Final Draft International Standard TR – Technical Report

EN – European Norm CIE – Commission Internationale de l’Eclairage

Division 2 - Measurement of Light and Radiation Division 6 - Photobiology and Photochemistry

Page 3: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 3

Overview

• IEC TC34 (Lighting)

• SC34A (Lamps)

• SC34B (Caps/Holders)

• SC34C (Control Gear)

• IEC TC76 (Lasers)

• CIE Div 2

• CIE Div 6

Page 4: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 4

IEC SC34A Standards – ModulesIEC SC34A Standards – Modules

IEC 62031 LED Module – Safety PUBLISHED 01/2008

IEC XXXXX LED Module – Performance yet No official IEC proposal

(IEC Panel progressing)

Page 5: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 5

IEC SC34A Standards – LampsIEC SC34A Standards – Lamps IEC 62560 DRAFT LED lamps >50V - Safety CD expected very soon

IEC XXXXX DRAFT LED lamps >50V - Performance Proposal PRESCO(RTK)075 NP expected soon Traditional parameters apply

Bare lamp – Lumens Reflector – Cd / Beam angle

Page 6: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 6

IEC SC34A Standards – New proposalsIEC SC34A Standards – New proposals

IEC 61341 Amendment Measurement of centre beam intensity and beam

angle

IEC 61231 Amendment ILCOS (International lamp coding system)

IEC 62504 (NEW STANDARD) LED Terms and Definitions

Page 7: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 7

IEC SC34B Standards - Caps/holdersIEC SC34B Standards - Caps/holders

IEC 60061-1 Amd 32 - Caps IEC 60061-2 Amd 29 - Holders IEC 60061-3 Amd 31 - Gauges

LED Module connectors Published 2003 GUX2.5d GUY2.5d GUZ2.5d

Page 8: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 8

IEC SC34C Standards – Control GearIEC SC34C Standards – Control Gear

IEC 61347-2-13 LED control gear - Safety Published 05/2006

IEC 62384 LED control gear - Performance Published 08/2006

Page 9: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 9

IEC TC76 Standards – Lasers!!IEC TC76 Standards – Lasers!!

IEC 60825-1 Safety of laser products

Part 1 – Classification………. Edition 2 : 2007 LEDs for general lighting

removed from scope

EN published November 2007

In previous editions, LEDs were included in the scope of IEC 60825-1, and they may be still included in other parts of the IEC 60825 series. However, with the development of lamp safety standards, optical radiation safety of LEDs in general can be more appropriately addressed by lamp safety standards. The removal of LEDs from the scope of this Part 1 does not preclude other standards from including LEDs whenever they refer to lasers. CIE S009 may be applied to determine the risk group class of an LED or product incorporating one or more LEDs.

Page 10: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 10

Standards – IEC TC34/TC76 & CIEStandards – IEC TC34/TC76 & CIE

CIE S 009 : 2002 IEC 62471 : 2006 Photobiological safety of

lamps and lamp systems

Currently being revised to be more “user friendly” and to better cover LEDs

Latest DRAFT still awaited

Page 11: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 11

Standards – IEC TC34/TC76Standards – IEC TC34/TC76

IEC TR 62471-2 DRAFT Photobiological safety of lamps and lamp systems

– Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety

CD stage – 76/378/CD Comments by 21st March (extension requested as

document not circulated to TC34 lighting committee) Information to be provided by Lamp/LED supplier Information/Marking of Luminaire

Page 12: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 12

CIE – Division 2 CIE – Division 2

2-45 Measurement of LEDs – revision of CIE 127 Revise CIE Pub. 127 to include improved definitions of

quantities and methods of measurement for total flux and partial flux of LEDs and to re-evaluate other parts including spectral and color measurements of LEDs.

PUBLISHED 2007

2-46 CIE/ISO standards on LED intensity measurements To prepare a CIE/ISO standard on the measurement of LED

intensity based on the CIE Pub. 127.

Page 13: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 13

CIE – Division 2CIE – Division 2

2-50 Measurement of the optical properties of LED clusters and arrays To produce a technical report for the measurement of optical

properties of visible LED arrays and clusters, to derive optical quantities for large LED arrays and recommendations for measurement methods and conditions.

2-58 Measurement of LED radiance and luminance To prepare a CIE Technical Report setting out recommended

measurement methods for the luminance and radiance of LEDs, taking particular account of the specific requirements of relevant photobiological safety standards

Page 14: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association

LA LED – 28th February 2008Slide 14

CIE – Division 6CIE – Division 6

6-47 Photobiological Safety of Lamps and Lamp System Cleveland, USA – July 2006 Ottawa, Canada – September 2006 Beijing, China – July 2007

Review of CIE S 009 / IEC 62471

Page 15: LED Panel 28 th February 2008 LED Standardisation Lawrence Barling Senior Technical Manager The Lighting Association