Upload
nshuti-rene-fabrice
View
92
Download
3
Embed Size (px)
DESCRIPTION
3D Printing
Citation preview
-MatterControl -1.
USB , Connect .
Add . ( , .)
name . , Save&Continue .
, Setting .
2. STL
Add STL , STL .
STL .
STL . , , .
STL .
STL STL G-code Layer View Generate G-code .
3. Setting
-MatterControl . STL , .
MatterControl 3 Setting . Slice Engine . Quality . Material .
-Quality : infill support .
-Material : .
Setting , . .
MatterControl Setting (Slice settings)
1.) Print
(1) (2)
(1) Layer Height : < 0.25 / 0.2() / 0.15 / 0.1 > , .( )
(2) Fill Density : Infill . Fill Type : Infill .
(3) (4)
(5) (6)
(5) Generate Support Material : Support , Support . Support Type : Support . Pattern Spacing : Support . ( 5~7mm )
(6) Repair : , G-code , STL , .
(7) (8)
(9)
2.) Fliament
(10) (11)
(10) PLA / ABS -PLA : Extruder 220~210 / Bed 10~20 ( , .) -ABS : Extruder 240 / Bed 70 or 10~20 ( 70 , .)
(11) Cooling : / . -Fan Speed 80%~100% . ( )
3.) Printer
(12) (13)
(12) Bed Size : . . ( Deltabot-K mini_cu/gu .)
(13) Custom G-code : G-code , . *Code : ex) G28()+()
(14)
(14) Nozzle Diameter : 0.4. ( 0.3/0.6/0.8 .)
-Printer Setting . ( , )
-MatterControl MatterSlice Setting. (MatterControl Repetier-Host Cura .)
*) , Save G-code !
4. (Controls)
Extruder . ( 3- Material , .)
Bed .
Fan Speed .
Home , . (Home All)
Extruder Speed Setting 1 Setting .
G-Code , Start . (Bed 150mm , Extruder .)
, .
STL view/copy/export/remove . -VIEW : STL . -COPY : STL . -EXPORT : G-Code . -REMOVE : STL .
5. (Configuration)
MatterControl .
Language Setting / .
6. G-code
2D STL G-Code 2D .
3D STL G-Code 3D .
, .
, .
#) 2D InFill
Concentric Grid
Line Triangles