5
CURRICULUM VITAE PATTABIRAMAN. M No: 3/9 Devaraj pillai stret, Mobile : +91-9789804032, West Tambaram, E-mail: [email protected] Chennai- 45. __________________________________________________________________ ________ OBJECTIVE: Mr. pattabiraman is worked with Piping designer, Mechanical Drawing & Isometrics, Equipment and piping modeling. Well versed with drawings and documents like Piping and Instrumentation diagram, As-built drawings, have familiar and practical experience with AutoCAD, Microstation, as. Knowledge of 3D tools like PDMS. Professionally committed and have good interpersonal skills, are fluent in written and spoken English, independent can take on responsibility, service minded and work with a good drive. Offshore platforms and onshore plants 3D models in LFM software. PROFESSIONAL CARRER: Organisation : Ramboll oil & gas Position Held : Piping Designer Period : April 2012 to till date Nature of work: Preparation of Process Flow Diagram Preparation of Piping and Instrumentation Diagram Preparation of Piping Layouts Preparation of Equipment Layouts Preparation of Equipment list and specification Preparation of valve list and specification Preparation of Line list and specification

patabiraman 1

Embed Size (px)

Citation preview

Page 1: patabiraman 1

CURRICULUM VITAE

PATTABIRAMAN. M No: 3/9 Devaraj pillai stret,Mobile : +91-9789804032, West Tambaram,E-mail: [email protected] Chennai- 45.

__________________________________________________________________________

OBJECTIVE: Mr. pattabiraman is worked with Piping designer, Mechanical Drawing & Isometrics, Equipment and piping modeling. Well versed with drawings and documents like Piping and Instrumentation diagram, As-built drawings, have familiar and practical experience with AutoCAD, Microstation, as. Knowledge of 3D tools like PDMS. Professionally committed and have good interpersonal skills, are fluent in written and spoken English, independent can take on responsibility, service minded and work with a good drive. Offshore platforms and onshore plants 3D models in LFM software.

PROFESSIONAL CARRER:

Organisation : Ramboll oil & gas

Position Held : Piping Designer

Period : April 2012 to till date

Nature of work:

Preparation of Process Flow Diagram Preparation of Piping and Instrumentation Diagram Preparation of Piping Layouts Preparation of Equipment Layouts Preparation of Equipment list and specification Preparation of valve list and specification Preparation of Line list and specification Preparation of Piping Material Specification Preparation of Pipe routing and Isometric

PROJECTS:QP-PCRQatar Petroleum, QatarP&ID draftingPreparation of construction and demolition P&id's,Qc checking, Inter discipline comments updation and client comments updation

Page 2: patabiraman 1

QPDQTAR GAS, QatarP&ID draftingPreparation of construction and demolition P&id's,Qc checking, Inter discipline comments updation and client comments updationADCOUnited Arab EmiratesP&id draftingPreparation of construction and demolition P&id's,Qc checking, Inter discipline comments updating and client comments updation.PDMS:

Development of equipment layout and plot plan.Provide & check deliverables such as, Isometrics, Arrangements, Spreadsheets, Supports and Diagrams Identifying existing drawings to be modified.Experience in PDMS Design, Draft, and Isodraft.

Organisation : SKB Cad solution Pvt. Ltd., Chennai.

Position Held : Piping Designer

Period : June 2010 to March 2012Nature of work:

Preparation of Process Flow Diagram Preparation of Piping and Instrumentation Diagram Preparation of Piping Layouts Preparation of Equipment Layouts Preparation of Equipment list and specification Preparation of valve list and specification Preparation of Line list and specification Preparation of Piping Material Specification Preparation of Pipe routing and Isometric Preparation of Materials General arrangement drawings and detail drawing.

Deputation to: TATA CONSULTING ENGINEERINGPROJECTS:kalbakkam atomicpower station extention projectIGKAR, IndiaPIPING DESIGNER

PDMS:

Development of equipment layout and plot plan.

Page 3: patabiraman 1

Development of piping general arrangement drawings. Preparation of isometrics. Review and checking of piping layouts, isometrics etc. Working knowledge with / PDMS / AUTOCAD. Shall be able to

develop equipment, Preparation of Material List.

Organisation : ORCHID CHEMICAL & PHARMACEUTICALS LTD,

Position Held : Piping Designer.

Period : From April 2008 to May 2010.Nature of work:

Preparation of Process Flow Diagram Preparation of P&ID Preparation of Piping Layouts Preparation of Equipment list and specification Preparation of valve list and specification Preparation of Line list and specification

Organisation : DSM Soft (P) Ltd, Trichy.

Position Held : Senior Cad Engineer.

Period : From Dec 2005 to Oct 2007

Organisation : SKB Cad solution Pvt. Ltd., Chennai.

Position Held : Cad Draftsman.

Period : Jun 2002 to Nov 2005.

Organisation : Technic Industries Pvt.Ltd, Chennai.

Position Held : Quality control.

Period : Jan 1998 to May 2002.

Organisation : Addison &co Ltd, Chennai .

Position Held : Technician Apprentice.

Period : Oct 1996 to Sep 1997.

Page 4: patabiraman 1

.TECHNICAL QUALIFICATION:

1993-1996:D.M.E (Diploma in Mechanical Engineering)

Institution Name: Pallavan Polytechnic, Kanchipuram.

Percentage : 74% of marks.

SOFTWARE SKILL: PDMS Vr.11.6 AutoCAD 2010

Micro station V7.1 & V8

MS Office 2000

Personal Details

Name : M. PATTABIRAMAN.

Father’s Name : A. MANICKAVASAGAM.

Date of Birth : 02-06-1976.

Material status : Married

Passport detail : M8812293

Present salary : 550000PA

Expected salary : 700000PA

DECLARATION:

I here by declare that all the above information is true to the best of my Knowledge.

Page 5: patabiraman 1

Place:chennaiDate:25-04-2016 Yours faithfully

(M.PATTABIRAMAN)