Company

LOGO

Product OverviewBy ……..

Advanced Comm Co.,Ltd.

ปี�ที่��ก่�อตั้�ง : ปี� พ.ศ.2547ที่��ตั้ �ง : 39/158 หมู่�� 13,ลาดพร้�าว,ก่ร้�งเที่พฯ,

10230โที่ร้ศพที่� : 0-2530-6100 แฟ็ ก่ซ์�: -0 2530-

6101

ผลปีร้ะก่อบก่าร้ ปี� 2007 : 100 ล�านบาที่พนก่งาน : ปีร้ะมู่าณ 30 ที่�าน

Facts & Figures

แอ็�ดวานซ์ คอ็มมเราจะพั�ฒนาระบบเน�ตเว�รคขอ็งลู�กค�าด�วยเทคโนโลูย ท !ท�นสม�ย

ภารก�จเราจะน$าเสนอ็อ็%ปกรณ์ท !ม ค%ณ์ภาพัแลูะบร�การส�งส%ดเพั(!อ็สร�างความพั)งพัอ็ใจส�งส%ดให้�ก�บลู�กค�า

ว�ส�ยท�ศน เราจะเป-นผู้��น$าทางด�านการรวบรวมระบบแลูะผู้��จ�ดจ$าห้น/าย เราจะให้�บร�การท !เป-นมาตรฐานส�งส%ดก�บลู�กค�า เราจะให้�โอ็กาสก�บพัน�กงานท%กท/านท�1งในเร(!อ็งส/วนต�วแลูะเร(!อ็งการ

งาน

MAKE YOUR NETWORK BETTER

เปี นที่�งบร้(ษัที่ที่��จัดจั+าหน�ายอ�ปีก่ร้ณ�ที่างด�าน Network และ Data communication และผ��ให�คำ+าปีร้/ก่ษัาและร้วบร้วมู่ร้ะบบให�ก่บล�ก่คำ�า

เปี นบร้(ษัที่ที่��มู่�ที่ �งอ�ปีก่ร้ณ�ที่��เปี นอ�ปีก่ร้ณ�ที่�งตั้�นที่างและอ�ปีก่ร้ณ�ปีลายที่างเพ0�อสามู่าร้ถร้องร้บคำวามู่ตั้�องก่าร้ของล�ก่คำ�าได�อย�างคำร้บคำร้น

เร้ามู่�ร้ะบบร้ก่ษัาคำวามู่ปีลอดภัยของร้ะบบเน6ตั้ที่��มู่�ปีร้ะส(ที่ธิ(ภัาพเพ0�อน+าเสนอให�ก่บองคำ�ก่ร้ของที่�าน

เร้าเปี นตั้วแที่นขายให�ก่บแบร้นด�ชั้ �นน+ามู่าก่ก่ว�า 10 แบร้นด0 และแตั้�ละแบร้นด�ก่6เปี นที่��ร้� �จัก่ที่�วโลก่

Facts & Details

แอ็�ดวานซ์ คอ็มม

Product Overview

Fiber Series

E1 Access Series

xDSL Series

Testesting Equipment

IP Networking

Interface Converters

Datacom Accessories

IP SURVEILLANCE

Fiber Series

Fiber Media Converter Fiber Optic Multiplexer CWDM SDH

Fiber Media Converter

Rack Type Stand-alone

Fiber Media Converter Application

Rack Type

• Ideal for central office applications (16-ports/48-ports)

• Fiber to the home (FTTH)

• Fiber to the multi-tenant building (campus,hotel application)

• Industrial and military application

• Comprehensive media conversion platform include E1/T1/Datacom/Fast Ethernet/Gigabit Ethernet

• Redundant power supported

• Auto recovery function

• Manageable advanced features (SNMP):

• Link-loss forwarding

• Loopback test & Get CPE status

• Pass through QoS & Tag VLAN frame auto-select

• Network Management System supported.Helps administrators save labor & money

Stand-alone

• Compact design & Wall-mountable

• Support FE/GE,E1/T1,RS485,422 or Async232,FXO/FXS

• Full or Half-Duplex on copper

• Auto Negotiation at TP port

• Auto Crossover for MDI/MDIX at TP port

• Support Multi-mode & Single-mode

• Extend Fiber Optic distance up to 550m / 1,815 ft (Multi-mode)

• Extend Fiber Optic distance up to 120km / 3630 ft (Single mode)

• Connector support SC,ST,FC,LC

• Support GUI, SNMP Management with FRM301 Chassis

• Supports link-loss-forwarding function, loop-Back test, and remote state monitor

• Built-in power supply or external power

Rack Type

FRM301N : 3U high 19", 16 line card Non-managed modular media converter center. Dual power modules for redundant power ,AC and /or DC,cooling fans included.

FRM301

3U high 19",16 line card capacities. Supported line cards include Ethernet to fiber converters for 10/100Base-TX, or 10/100/1000Base-TX over multimode fiber (up to 2 km), single mode fiber (up to 120 km) or utilizing WDM (up to 40 km),G.703 E1/T1, Datacom (V35, X.21, RS530/ 449/ 232) and Serial (RS485/ 422/ 232) data communication interfaces over fiber.

FRM401 : 19” rack and occupies 4U (7 inch) of rack space.12 line cards, each card provides four complete fiber converters.The Hot Swappable Line Cards for the FRM401 are available in 10/100Base-TX Ethernet standard to fiber (100Base-FX) connection for multi-mode (up to 2Km) or single mode (up to 120Km).

Stand-alone (Management)

FIB1-10/100FFast Ethernet 10/100Base-TX to 100Base-FX manageable standalone media converter.

FIB1-DataFiber media converter for V.35, RS-232, RS-530, X.21 or RS-449 high-speed synchronous to Optic Fiber converter.

FIB1-E1/T1Fiber media transport for G.703 E1 transmission to Optic Fiber

converter.

Stand-alone (Management 1)

FIB1-SerialThe FIB1-Serial provides a fiber converter solution to extend RS-232 or RS-485 transmission to Optic Fiber converter.

FIB1-Serial/FDCThe FIB1-Serial/FDC is a asynchronous fiber optic Ring/ Daisy-chain modem which operates over a fiber media converter.

FIB1-1000DSFIB-1000DS is a fiber optical media converter and repeater that allows data rates up to 1.25Gbps.

Stand-alone (Management 2)

FIB1-1000MGThe FIB1-1000MG is a multimode (850nm or 1310nm option) to single mode (GBIC module) fiber optical media converter and repeater that allows data rates up to 1.25Gbib/sec.

FIB1-1000TSThe FIB1-1000TS is a standalone optical fiber media converter for 1000Base-T to 1000Base-SX/LX.

FIB1-1000ESThe FIB1-1000ES is a standalone optical fiber media converter for 10/100/1000Base TX to 1000Base-SX/LX.

Stand-alone (Management 3)

FIB1-DataThe FIB1-DATA is media converter for V.35, RS-232, RS-530, X.21 or RS-449 high-speed synchronous or low speed synchronous and asynchronous data transmission over optical fiber media.

FIB1-E1/T1The FIB1-E1 is a fiber media transport for G.703 E1 transmission. The BNC model provides unbalanced 75 Ohm coaxial connections while the RJ-45 model provides balanced 120 Ohm connections over twisted pair

wiring.

FIB1-SerialThe FIB1-Serial provides a fiber converter solution to extend RS-232 or RS-485 transmission distance up to 2km over multimode fiber or up to 120km over single mode fiber.

Stand-alone (Unmanagement)

FIB1-10/100NFIB1-10/100N is 10/100Base-TX to 100Base-FX unmanaged standalone media converters.

Fiber Optic Multiplexer

FMUX01A Application

FMUX04 Application

Fiber Optic Multiplexer

FMUX01AThe FMUX01-A is a single unit (1U), 19" rack mountable, E1/T1, Datacom & Ethernet Bridge Multiplexer that transmits up to 16 channels over a single fiber optic link.

FMUX04

The FMUX04 is a multiplexer for four (4) E1 or T1 (selectable)

transmissions over a single fiber optic link.

Ethernet over SONET/SDH

EN155B Connects 10/100Base-T Ethernet LANs over STM1 line

• 1U high, 19’ inch Rack mount units.• Comply with G.957 Standard• Supports SFP• Support SDH standards of Generic Framing Procedure (GFP) or Link Access Procedure (LAPS)• Supports 1 port 10/100 Base-TX Ethernet on board, with a slot for optional 4 x E1 Module or 4 x 100Mbps Ethernet module.• Supports Bandwidth control over Ethernet in increments 2 Mbps, up to 100Mbps wire-speed.• Supports AC or DC power supply• Supports console and SNMP management.

CWDM : Coarse Wavelength-Division Multiplexing

CWDM

Sigma Links 5000 : CWDM

• 5U high,19 (or 23) inch Rack with convertible standalone units,rack accommodates up to 17 card modules

• All modules are hot-swappable with AC/DC Power redundant and cooling fans module

• Alarm Relay contacts

• Chassis Cascade up to 16 Chassis

• LED and LCD status indication with keypad control

• TFTP firmware upgrade

• Support Concole,Telnet,SNMP.Web management

• Up to 8 CWDM wavelengths in compliance with ITU G.694.2

CWDM

Sigma Links 2000• 2U high,19(or 23) inch Rack with convertible standalone units,rack accommodates up to 6 card

modules

• All modules are hot-swappable with AC/DC Power redundant and cooling fans module

• Alarm Relay contacts

• LED status indication

• TFTP firmware upgrade

• Support Console,Telnet,SNMP,Web management

• Up to 8 CWDM wavelengths in compliance with ITU G.694.2

CWDM Application

A BConsolidation on Single Fiber

IP DataFEGE

Vx8Vx4Vx1

PDHSDHSONET

FEGE

IP Data

StorageESCONFICONFC

StorageESCONFICONFC

PBX

TELCO

PBX

TELCOPDHSDHSONET

Surveillance Surveillance

WDM Chassis

WDM Chassis

E1 Access

E1 Access

• ETU01 : E1 to Data,Ethernet

• ETU01-U : E1 Unframed to Data,Ethernet

• ETU01-A : E1 to Data,Ethernet/SNMP/EMS

• ETU01-C : E1 MUX/Data,Sub E1

• ETU01-D : E1 to Data,Ethernet

• Eoe-1 : E1 to Ethernet

• ETU04 : Ethernet over 4 E1 (Bridge)

• ERM01 : E1 to Data/Ethernet (concentrator)

Single-port Fractional E1, Modular I/F

Support: Frame, Unframed Management: DIP switch Connecter: BNC 75 Ohm, RJ-45 120 Ohm Interface: V.35,RS-530,X.21,RS-232,RS-449, ET10R

ET10/100, ET10 Support: Loop-back Test

ETU01

Single-port Unframed E1, Modular I/F

Support: Unframed Management: DIP switch Connecter: BNC 75 Ohm, RJ-45 120 Ohm Interface: V.35,RS-530,X.21,RS-232,RS-449, ET10R ET10/100, ET10 Support: Loop-back Test

ETU01-U

Single-port Fractional E1, Modular I/F

Support: Frame, Unframed Management: LCD display, Terminal, SNMP telnet Connecter: BNC 75 Ohm, DB-15 120 Ohm Interface: V.35,RS-530,X.21,RS-232,RS-449, ET10R ET10/100 Support: Loop-back Test

ETU01-A

Two-port Fractional E1, E1 Sub-Link

Support: 2 port DTE, E1 Sub-Link Support; Frame, Unframed Management: LCD display, Terminal Connecter: BNC 75 Ohm, RJ-45 120 Ohm Interface: V.35,RS-530,X.21,RS-232,RS-449 Support: Loop-back Test

ETU01-C

Single-port Fractional E1

Support; Frame, Unframed Management: LCD display, Terminal Connecter: BNC 75 Ohm, RJ-45 120 Ohm Interface: V.35 Support: Loop-back Test

ETU01-D

Ethernet over E1

Support: Unframed 2.048 Mbps Management: DIP Switch Connecter: BNC 75 Ohm, RJ-45 120 Ohm Interface: Ethernet 10/100 Bridge Support: Loop-back Test

EOe-1EOe-1

4E1 Inverse Multiplexer

Ethernet Over 4E1 Support: Data rate from 1.92 Mbps to 7.68 Mbps Management: DIP Switch Connecter: BNC 75 Ohm Interface: Ethernet 10/100 Bridge

ETU04

E1 and Fractional E1 Concentrator

Support: 13 Slots for G.703 E1 Card Support: Hot swappable line card Support: Unframed, Fractional E1 type Interface type: V.35,RS-530,X.21,RS-232,RS-449, ET100R ET10/100 Management: SNMP card ,Terminal ,Telnet ,GUI ,EMS

ERM01

ETU Compare

ETU01 ETU01-U ETU01-A ETU01-C ETU01-D EoE1 ETU04

Framing F/U U F/U F/U F/U U U

Port I/F 1 1 1 2 1 1 1

Speed Max 2.048M 2.048M 2.048M 2.048M 2.048M 2.048M 7.68M

Display LCD No No Yes Yes Yes No No

Module I/F Modular Modular Modular Fixed Fixed Fixed Fixed

Management DIP DIP SNMP Terminal Terminal DIP DIP

SUB-Link E1 No No No Yes No No No

xDSL

xDSL Application

ADSL CPE

ATU R-140 : ADSL2+ Bridge/Router Modem

Single Ethernet port plus USB ADSL/ADSL2/ADSL2+/READSL Texas Instruments TD7300 solution

ADSL CPE

ATU R-210 : ADSL2+ Bridge/Router Modem

4 port built-in Switch ADSL/ADLS2/ADSL2+/READSL Broadcom BMC6338 solution

2U chassis, temperature hardened GE trunk card

2-GbE, 2-GbE Fiber SFP 1-FE outband management port 1- Local Serial console

3 Slots for 24 each ADSL2+ (w/splitters) Annex A ANSI Annex A ETSI Annex B

Mini DSLAM

MD-20 mini-DSLAM (IP DSLAM)

Mini DSLAM

1.5U chassis, temperature hardened, pizzabox

Dual service -48VDC input AC Power supply optional GE Uplink

2-GbE, 2-GbE Fiber SFP 1-FE outband management port 1- Local Serial console

Fixed 24 or 48 each ADSL2+ (w/splitters) Annex A ANSI Annex A ETSI Annex B

MD-15 mini-DSLAM (IP DSLAM)

G.SHDSL Application

G.SHDSL Application

G.SHDSL

SHRM03 – E1 / V35 / ET100 : G.SHDSL Modem Concentrator (TDM)

- Central solution in standard 19 inch rack- Downloadable software for easy upgrade- E1 and fractional E1 capable- Each line card supports 2 channels of single pair for E1/Datacom/Ethernet solution N x 64k rate selectable from 64Kbps to 2.304Mbps- Hot swappable cards and redundant power supplies- Menu oriented console screens for ease of use- Optional SNMP network management system card- Up to 13 cards (26 loops) cand be installed + SNMP card

G.SHDSL

SHDTU03 – E1 / V35 / ET100 (TDM)

- Bandwidth guaranteed transmission equipment- Can operate in back to back configurations- Local management interface with LCD display- Remote loopback- SHDSL Line performance monitoring- Standard G.SHDSL (ITU G.991.2) support for improved reach/speed and greater interopreability- Use existing copper loop infrastructures- Up to 2.048Mbps symmetrical service bit rate

- Central solution in 19 inch rack- Software upgrade via TFTP or Web interface- IP based in-band management- Each card supports 2 channels of single pair for Ethernet Bridging or Routing solution at nx64 rates up to 2.304Mbps- Hot swappable cards and redundant power supplies- Web browser screens for easy use- SNMP agent embedded in each channel- Up to 13 cards (26 loops) may be placed in on rack

SHRM03 – ET100R : G.SHDSL Modem Concentrator (ATM)

G.SHDSL

G.SHDSL

SHDTU03-ET10R/SHDTU03F-ET10R

SHDTU03A-ET10RS/SHDTU03AF-ET10RS

- Bandwidth guaranteed transmission equipment- Can operate in point-to-point configurations- Support 2 wire and 4 wire- SHDSL Line performance monitoring- Standard G.SHDSL (ITU G.991.2) support for improved reach/speed and greater interoperability- Use existing copper loop infrastructures- Up to 2.304Mbps (2-wire) or 4.608Mbps (4-wire) symmetrical service bit rate

VDSL

VDTU101/201: 25Mbps VDSL 4 band CO/CPE Modem

- Compliant with IEEE802.3 10BASET,IEEE802.3u 100BASE-TX standard.

- Support high bandwidth up to 25Mbps symmetrical

- Support max distance up to 1.9Km.

- 1*RJ-11 connector for Ehternet over VDSL,1*RJ- 11 for telephone/PBX connection,1*RJ-45 port for 10/100Mbps Ehternet with auto MDI/MDIX

- Support Auto-speed

- Voice and Data work on the same telephone line

- Support flow control IEEE802.3x for Full Duplec & Back Pressure for Half Duplex

VDSL2

VDTU2-104(CO)/204(CPE)

- IEEE802.3 & 802.3u Ethernet Standards

- Provides 4 x 10/100M auto-sensing RJ-45 Ethernet ports

- Support Bandwidth setup with 100Mbps VDSL RJ-11 ports

- POTS/ISDN Splitter port RJ-11 x 1 (Splitter on board)

- Supports auto speed for VDSL2 port

- Supports Web management (HTTP),TFTP

- Supports PPPOE

- Supports uPnP

- Supports NAT/DHCP/DMZ

- Supports Firewall

- Support Route & Switch mode

- Supports Loop back

VDSL2 Point to Point Application

Protocol Tester

Bit Error Rate Tester

• Compact,notebook size.

• Rechargeable battery with battery low indicator

• Portable for field use

• Results Report

• Supports CRC, and BPV performance analysis and generator

• Print out via Parallel Printer port/Print out via RS-232 Series Port (Option)

HCT-BERT/H : E1/T1/Datacom Bit Error Rate Tester

Bert and Datacom Protocol Tester

HCT-6000/ 6000A : Bert and Datacom Protocol Tester

• 128K BERT (Low Speed)

• 2M BERT (High Speed)

• Auto / Manual configuration

• Rechargeable / Easy to changed battery

• Up/Down Load Data to PC

• Frame Relay Analysis

• Menu driven setup

• Remote control function

PCM Analyzers

BTM10 : PCM Analyzers• BERT Histogram Analysis

• Color LCD display 32 Characters x 8 Lines,Text/Graphic mode

• Portable for field use

• Print out via Parallel Printer port

• Rechargeable Battery with battery low indicator

• Result Report :

• Direct display on LCD screen

• Print out via Parallel Printer port

• Upgradeable for advanced features

OTDR

Optical Time Domain Reflectometer

• Auto off function conserves battery energy

• Backlight supports testing work at low light conditions

• Built-in NiMH rechargeable battery supports 5 hours continuous operation

• Dual wavelength capability (1310 & 1550 nm)

• Dust,damp and shock resistant design for field application

• Easy to use, no tedious learning process

• Fast test & color LCD displays all measurement information

• Large memory capacity (300 test curves)

• LCD indicators for battery charge and LD lasing status

• RS-232/USB data upload ports

IP Networking

10/100Mbps Ethernet Bridge

ET100 : 10/100Mbps Ethernet Bridge

• Automatic LAN table learning and aging

• Auto-MDI/MDIX detects and corrects crossed cable

• IEEE 802.3x flow control

• Selectable data port interface V.35,Rs-530,RS-449,X.21 and RS-232 (with cable adapters)

• Transparent half/full duplex support on WAN/LAN interface

Serial stream over IP Network

STE10 : Serial stream over IP Network

• IEEE802.3 10Base-T Ethernet

• Low cost,compact design

• Operates in either server or client mode

• Provides packetization of serial data

• Serial connection over Ethernet

Stand-Alone Modem Ethernet IP Router

IPR10 : Stand-Alone Modem Ethernet IP Router

• Allow remote access to the LAN for mobile users

• ASYNC WAN Ports provide RS-232 up to 460 Kbps

• Compatible with existing 14.4,28.8,33.6 and 56K modems or ISDN TAs

• Connect branch or remote offices over standard dial-up

phone lines

• Connect the entire network to the Internet with just one modem and ISP account

• Installation wizard for easy setup under Windows or NT

• Provides DHCP function to supply client IP Address,subnet,DNS,and Gateway

• User password setting or Radius authentication for Remote Access

• Share modems and phone lines for increased bandwidth

Interface Converter

Interface Converter

V35IP-CAB : RS-232 to V.35 IP-Cable V35IP-CAB/DCE :

RS-232DTE <-> V35CAB/DCE<->V.35DCE V35IP-CAB/DTE :

RS-232DCE<-> V35CAB/DTE<->V.35DTE

V35IP/ 449IP/ X21IP : RS-232 to V.35/RS449/X.21/RS-530 Interface Converter

Interface Converter

V35/530IP, V35/449IP, V35/X21IP V.35 to RS-530/RS-449/X.21 Interface Converter

IC485-3 RS-232 to RS-485 Interface Converter

IC485IP RS-232 to RS-422/RS-485 Interface Converter

V35/485-1 V.35 to RS-485 Interface Converter RS-485; 2 or 4 wire,Half or Full Duplex DTE/DCE selectable Easy to configure

ic232IP : RS-232 Short Haul Modem Async RS-232 to RJ-45 Baud Rate Up to 128 Kbps DCE/DTE switchable

Interface Converter

Interface Converter Application

V.35IP-CAB

IC485-3

IC485IP

V35/485-1

Interface Converter Application

ic232IP : RS-232 Short Haul Modem

Interface Converter Application

Datacom Accessories

Datacom Accessories

Fiber Transceiver GBIC Transceiver SFP Transceiver

Fiber Mode Attenuator Standard attenuation values at 3,5,10,15,20 dB Easy installation

Fiber Patch cords & Pigtail Various connector type available Single mode,Multi mode

Datacom Accessories

Network Cables

• Bay Network,3COM,Intel,Nortel Calbes and other customized cable are all offered

Coax to Twisted Pair

• Conversion between 75 ohm coax and 120 ohm twisted pair for E1

• No power required

• Small,light-weight Balun

• Works for balanced & unbalanced E1

IP SURVEILLANCE

Digital Video Server

Motion JPEG• DVS-8201 : 1Ch MJPEG Digital Video Server • DVS-8202 : 2Ch MJPEG Digital Video Server • DVS-8204 : 4Ch MJPEG Digital Video Server

MPEG4• DVS-8104 : 4Channel MPEG4 Digital Video Server

• DVS-8116 :16Channel MPEG4 Digital Video Server

Dual Codec MJPEG+MPEG4 Digital Video Server • DVS-8301 : 1Channel Dual Codec MJPEG+MPEG4

MJPEG Digital Video Server

DVS-8201/8202/8204• Self-Contained HTTP Web Server providing Internet capability• IP assignment via ARP/Web Page/IP, easy to install for users.• JAVA-based web page providing maximum platform compatibility • Active-X control for Internet Explorer tm providing maximum performance. • Motion Detection / Date / Time / GPIO Input for event trigger • Email / FTP / Internal Buffer Storage / Relay Out / PPP Dialout for

event action • CTCU DDNS support for dynamic IP application • 3- layer User Security Control • Remote Upgradeable firmware and user content pages via FTP• Server operating control via CGI base script easy for users to integrate the application.

MPEG4 Digital Video Server

DVS-8104/8116• High-density with 16 ch video-in ports per unit

• Motion-detection function, user configurable

• 4/16 audio-in and one audio out for each unit

• Up to 4 sensor contact ports (DI/DO) per unit

• NTSC, PAL user configurable

• Provides one data port RS-485/422/232 for PTZ used

• Support Pan/Tilt/Zoom configuration

• Supports IGMP v2 multicast function

• Auto e-mail warning system via a set IP address

• 2 ports USB2.0 for WiFi and mass storage

• Built-In Web Server; RJ-45 connector for Ethernet

• MPEG4 & Motion JPEG video compression format

• 30/25 FPS@ Full D1 (720x480 / 720x576) resolution

• RS-485/RS-232/GPIO/Video out All-In-One connector

• Motion Detection / Date / Time / GPIO Input for event trigger

• Email / FTP / Internal Buffer Storage / Relay Out / PPP Dialout for event action

• One BNC Video Input, and One BNC loopback Video Output, One Audio Input

• Remote Upgradeable firmware and user content pages via FTP

MJPEG+MPEG4 Digital Video Server

DVS-8301 : Dual Codec MJPEG+MPEG4 Digital Video Server

DVS Application

Company

LOGOAdvanced Comm Co.,Ltd.

In-band Management Media Converter

New Products

FRM & FMC Series

FRM In-Band Management Series FMC Non-Management Series

CPE Stand-Alone One-Slot Chassis CPE Stand-Alone Converter

CO Chassis : FRM220-CH20 CO Chassis : FMC-CH16

With Internal AC or DC Powers

FMC Series Unmanaged Converter

FMC Converter RackFMC-CH16

•19” 2U Rack mount Chassis•Support 16 slots for Media converter

•Complies with 802.3, 10Base-T 802.3u 100Base-TX and 100Base-FX•Auto-Negotiation•Support Link-Loss-Forwarding•Loop-Back Test•MTU 9K bytes•6 LED indicators•MDI/MDIX Auto cross over•DC in 12V

Fast Ethernet ConverterFMC-110

FMC Series Unmanaged Converter

Fast Ethernet PoE Converter FMC-110P

•Audio Transmission•Caller ID•Automatic Ring Down•Loop-Back Test•Dual or Single fiber options•Support FXO / FXS mode•LED indicators•DC in 12V

FMC Series managed Converter

•Complies with 802.3, 10Base-T 802.3u 100Base-TX and 100Base-FX•Auto-Negotiation•Support Link-Loss-Forwarding•Loop-Back Test•MTU 2K bytes•6 LED indicators•MDI/MDIX Auto cross over•DC in 12V•SNMP, Web, Telnet management

Fast Ethernet ConverterFMC-210

Fast Ethernet PoE Converter FMC-210P

•Audio Transmission•Caller ID•Automatic Ring Down•Loop-Back Test•Dual or Single fiber options•Support FXO / FXS mode•LED indicators•DC in 12V•SNMP, Web, Telnet management

FRM-220 Series Managed Converter

FRM220 CO Management Chassis

FRM220-CH01

With External AC adaptor

1 Slot CPE Standalone Chassis

FRM-220 Series

Line Card

FRM220-CH01/AC

With Internal AC power

FRM220-CH01/DC

With Internal DC power

20-slot 2U Hot Swappable

In-Band Management converter

Fast Ethernet ConverterFRM220-210

•Complies with 802.3, 10Base-T 802.3u 100Base-TX and 100Base-FX•Auto-Negotiation•Support Link-Loss-Forwarding•Loop-Back Test•Remote Monitor and Configure•MTU 2K bytes•6 LED indicators•MDI/MDIX Auto cross over•SNMP, Web, Telnet management

POTS Over Fiber ConverterFRM220-FXO/FXS

•Audio Transmission•Caller ID•Automatic Ring Down•Loop-Back Test•Dual or Single fiber options•Support FXO / FXS mode•LED indicators•SNMP, Web, Telnet management