Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
bentleyuser.dk
ÅRSMØDE 2015
NORDIC CIVIL 2015
Munkebjerg Hotel, Vejle
9.-11. november
Årsmøde 2015 og Nordic Civil konference 2015 den 9. – 11. november i Vejle
Det er med glæde, at vi præsenterer dette års program for Bentleyuser.dk Årsmøde 2015 og tilNordic Civil konference 2015 på Munkebjerg Hotel.
Vi håber, at der er noget for enhver smag, og at du som tidligere år kan sammensætte et godtpersonligt program ud fra Årsmødets mange indlæg og workshops. Husk også at uformel videndeling- at samtale og mødes i faglig dialog - kan bidrage til at fuldende deltagelsen i Årsmødet.
Årsmødet fordeler sig som tidligere år på 5 faglige spor og et workshop spor over 2 dage. I år vil derogså være mulighed for, at alle kan deltage over 3 dage sammen med Nordic Civil konferencen, idetder om onsdagen er 3 workshop spor for henholdsvis Geospatial, MicroStation CONNECT ogProjectWise.
Som sædvanlig deltager mange af Bentleys kapaciteter i Årsmødet, og de bidrager gennem præsen-tationer og afholdelse af workshops til, at Årsmødet forhåbentlig også i år bliver et godt arrangement.Mange danske firmaer bakker også op om Årsmødet ved at deltage og videregive deres viden ogerfaringer gennem bruger-præsentationer. Den brede opbakning betyder, at Årsmødet bliver ensærlig og unik begivenhed, hvilket foreningen værdsætter meget højt.
Nordic Civil konferencen byder på sessioner og workshops samt masser af muligheder for at få endialog med Bentley gennem 3 dage. OpenRoads teknologien er i år endnu mere i fokus med 3Dmodellering og brugen af digitale data med sessioner og workshops over 3 dage.
Udover at der introduceres nye versioner afvelkendt software, er der også i år en rækkespændende nye software-koncepter somintroduceres ved konferencen.
Hør f.eks. om Context Capture (A2 -Introduction to Context Capture) der via fotostaget fra forskellige viewpoints automatiskkan sammensætte billederne til en 3D CADmodel.
Eller hør om hvordan du udveksler din 3DOpenRoads modeller via Bentleys nye Civil I-model format (F14 - Why are Integrated Civili-Model's a Better Option to Exchange Data?)
Årets keynotes har fokus på Bentley CONNECT Edition, som er Bentleys bud på fremtidenssamarbejdsplatform. I år er det lykkes at få Bhupinder Singh, Senior Vice President for BentleySoftware til at komme, og han vil sammen med Makai Smith, Senior Product Manager forMicroStation, præsentere perspektivet og visionerne for Bentley CONNECT Edition. BhupinderSingh er overordnet ansvarlig for den stratetiske udvikling af Bentley Software, og i hans keynotemandag morgen vil du se det nyeste fra Bentley - og høre, hvad Bentley-fremtiden bringer.
Bhupinder Singh vil følge op i hans anden keynote mandag eftermiddag, hvor fokus vil på BentleyCONNECT Edition brugt på tværs af fag med integreret modelling og med øjeblikkelig feedback vedudnyttelse af et fælles projekt miljø. Makai Smiths keynote tirsdag morgen vil gå endnu mere idybden og fokusere på den nye CONNECT Edition specifikt på MicroStation.
Foreningens Generalforsamling afholdes som tidligere år i forbindelse med Årsmødet mandageftermiddag. Formandens beretning præsenteres som tidligere år i forbindelse med konferencensstart mandag morgen. Dagsorden og bilag udsendes 3 uger før Generalforsamlingen tilmedlemsvirksomheders kontaktperson og til foreningens personlige medlemmer.
Vi vil gerne opfordre til, at alle deltager i Generalforsamlingen, da det giver et godt indblik iforeningens administrative arbejde. Ifald det kommer til afstemning er der én stemme pr.medlemsvirksomhed/personligt medlem.
Husk også at holde øje med foreningens hjemmeside www.bentleyuser.dk, hvor der i forbindelsemed Årsmødet vil blive uploadet nyheder og evt. ændringer til programmet.
Foreningens hjemmeside har i 2015 fået etopdateret layout med nye digitalemuligheder. Foreningens medlemsdata-base opdateres løbende via hjemmesiden,hvor hvert medlem selv holder sin egenprofil ajour med SIG-interesser, kontaktdatamv. Hjemmesiden er også stedet, hvor manløbende finder inspiration, nyheder,mødereferater fra afholdte SIG-møder ogmeget mere.
SIG formændene og bestyrelsen håber, at I finder dette Årsmøde interessant, og at I gennem jeresdeltagelse vil støtte foreningens arbejde fagligt som socialt.
Vi glæder os til at se jer alle på Munkebjerg den 9.-11. november!
Med venlig hilsenbentleyuser.dk
Carsten Ahm Lene Westh Stefan SigvardssonFormand Civil SIG formand Account Directorbentleyuser.dk bentleyuser.dk Bentley Scandinavia
Skovsal A Skovsal B Skovsal C Munkebjergsalen
09:00 Registrering og morgenbrød / Registration and breakfast (Munkebjergsalens foyer)09:30 Velkomst og formandens beretning ved formand Carsten Ahm, COWI (Munkebjergsalen)
10:40 A1 - What can we expect in 2016 forGeoSpatial Desktop and Mobile.
A GeoSpatial Keynote to open the GeoSpatialtrack. What is the current state of BentleyMap, Bentley Map Mobile, Descartes,Pointools and what is this new productSmart3dCapture. Further we look at the'Roadmap' for all these product, what can weexpect to see in the next year and maybe aglimpse of what's coming later.
B1 - What's New in AECOsim BuildingDesigner V8i SELECTseries 6?
Come see the new features, updates, andenhancements delivered in the SELECTseries6 Release of AECOsim Building Designer.
C1 - ProjectWise RoadMap
Roadmap and technology update onProjectWise, Bentley’s project collaborationand content management platform.
D1 - QuickStart for MicroStation CONNECTEdition
Are you new to MicroStation CONNECTEdition and looking to learn some tools andworkflows to be productive right away?
Get a quickstart introduction to commonpractices to create design geometry andproduce project deliverables in thispresentation.
11:30 Gijsbert Noordam, Bentley Jonas Wahlberg, Bentley Susan Brandt, Bentley Makai Smith, Bentley
11:40 A2 - Introduction on Context Capture
The principle of Context Cepture is to analyzeseveral photographs of a static subject, takenfrom different viewpoints, and to automaticallydetect pixels corresponding to a same physicalpoint. From many such correspondences,relative orientations of photos and accurate 3Dshape of the scene can be inferred.
Come and hear about this new tool that soonwill be an essential part of the point cloudworkflow
B2 - BIM, Digitale Systemer og 3D design iVejdirektoratet
Vejdirektoratet har gennem en række interneprojekter arbejdet mod at gøreanlægsprocessen mere digital. I første omganghar der været fokus på udbud og udførsel,men der er nu i højere grad sat fokus påensretning af digitale projektdata på tværs afhele vejanlæggets livscyklus. Indlægget vil giveen status på de interne aktiviteter samthvordan der arbejdes med BIM iVejdirektoratet
C2 - Introducing ProjectWise EngineeringContent Management
ProjectWise Engineering Content Managementprovides capabilities for information sharingand increase transparency throughout theproject lifecycle
Learn about the new way of working. See thenew and enhanced interface and learn whatEngineering Content Management is all about.
D2 - Processing Point Clouds with BentleyDescartes
Learn about the latest improvementsintroduced within Bentley Descartes. Learnhow to extract value from your point cloud dataand create high quality deliverables.
12:30 Dan Cutler, Bentley Rasmus Fuglsang, Vejdirektoratet Bill McNamara, Bentley Mieke Pol, Bentley
12:30 Frokost / Lunch
13:30
14:20
14:30 A3 - CAD og GIS – forskelle, ligheder ogmuligheder
Ofte vil der i projekter indgå data fra både CADog GIS verdenen, og fra forskelligemedarbejdere på hver deres platform. Når dataskal fra CAD til GIS eller omvendt tager detofte lang tid, eller der mistes information. For atfå det fulde udbytte af begge verdener er detnødvendigt at kende ligheder og forskelle. Hvorligger faldgruberne, og hvordan kan manundgå dem. F.eks. hvis der designes i lokaltkoordinatsystem, men man skal integrere meddata i UTM eller System 34.
B3 - BIM Advancements for theInfrastructure Lifecycle
BIM has advanced beyond 3D design andvisualization. Join Bhupinder Singh, SVPBentley Software as he discusses ever-expanding advancements for betterperformance assets through increasing depthof Information Modeling, and better performingprojects through increasing breadth ofInformation Mobility.
C3 - Handover from ProjectWise toAssetWise
When combined, ProjectWise and AssetWiseprovide an integrated project information andasset management environment whichstreamlines the process of and improvesoverall handover of data into systems used inoperations.
Learn about how you move your data from theproduction system to the asset managementsystem.
D3 - Udnyttelse af MicroStation data påmobile enheder i Vejdirektoratet
Hør hvordan Vejdirektoratet udnytterMicroStation data på iPads i diverseapplikationer. Data som både kan tilgås afVejdirektoratets tilsyn, samarbejdspartnere ogaf helt almindelige borgere
15:20 Morten M Sørensen, Niras Karsten Pudziow, Bentley Bill McNamara, Bentley Torben Rasmussen, Vejdirektoratet
15:30 Pause / Break
15:45 A4 - Faaborg 3D Bymodel
Hvordan kan der via de frie grunddataudarbejdes 3D bymodeller. I dennegennemgang arbejdes med de frie data. Hvader nemt og hvad er udfordringen? Kom og sehvordan i denne live demo.
B4 - Innovations in Digital Workflows
Leveraging digital information throughout thelife of a project is a common goal for all, butfinding a solution that allows information to beshared downstream from the office to the fieldremains a challenge. Niklas Thillgren fromBluebeam® will show the ways project teamsare digitally collaborating and sharing accessto information through the cloud, maintaining asingle source of truth. Discover QA/QCworkflows and manage holistic project sheetsin Bluebeam Revu® and learn how toimplement them within your projects. And findout how to integrate Revu with your DMS,including SharePoint® and ProjectWise®.
C4 - Rules Engine. Opsætning
Hvordan opsættes Rules Engine? Og hvadskal man være opmærksom på? En casestudy fra det virkelige liv.
D4 - Why the Ribbon, navigating the userinterface in MicroStation CONNECT Edition
MicroStation CONNECT Edition delivers abrand new user experience. This modern,consistent and intuitive environment lowers thetraining threshold. The ribbon is an industry-standard layout for a user interface used bymany applications including Microsoft Officeand is comfortable to many users.Customization is provided through customribbon groups and tabs with the ability to easilyswitch between interfaces “on the fly”. Masternavigation of the user interface in MicroStationCONNECT Edition.
16:35 Jan Thinglev Olsen, Geopartner Niklas Thillgren, Bluebeam Finn Mejding, Aktins Mieke Pol, Bentley
16:45
17:45
19:00 Drinks (Munkebjergsalens foyer)
19:30 Middag / Dinner (Munkebjergsalen)
Bhupinder Singh, Senior Vice President, Bentley Software
MANDAG 9. NOVEMBER
KEYNOTE: The CONNECT Edition: The Common Environment for Comprehensive Project Delivery (Munkebjergsalen)
Discover how the CONNECT Edition will help you improve project delivery. By leveraging a Common Environment you can productively integrate modeling and documentation workflows acrossdisciplines for projects of any size and complexity. You can easily access, share, and manage all your data throughout the project and asset lifecycle. You can make better decisions withimmediate feedback and clear insight made possible through complete visibility into design and project performance.
BentleyUser.dk - Generalforsamling 2014 (Skovsal A)
Bentley Café (Salon 4)- et uformelt Café-arrangement, hvor du får mulighed for at møde og stille spørgsmål direkte til Bentleys udviklere, og tale med foreningens SIGformænd og ligesindede.- bring your questions to Bentley developers, meet the SIG chairmen and join the informal discussions.
09:50 Bentley Keynote - Technology Advancements: Innovations for Comprehensive Project DeliveryBhupinder Singh (Senior Vice President, Bentley Software) is responsible for the strategic direction, development and delivery of Bentley’ssoftware solutions. Bentley is constantly innovating and advancing its offerings to help you design and deliver infrastructure projects better, faster,and with less risk. Join Bhupinder, who will explore the latest technology innovations and recent acquisitions supporting comprehensive projectdelivery.
Bhupinder Singh, Senior Vice President, Bentley Software
Tree-Top 1 Tree-Top 4 Fjordsalen Mødelokale 3+5
09:00
09:30
09:50
10:40 P1 - Plant Keynote
Get a status on current and comingreleases of OpenPlant andAutoPLANT. Where is Bentley Plantheading?
W1 - MSTN WORKSHOPMicroStation CONNECT Edition -Hands on
Come and have an exclusive look atthe next major MicroStation releaseand get a chance to familiariseyourself with the new interface.
(will also be repeated in W7)
11:30 Darren Guy, Bentley Mieke Pol, Bentley Ian Rosam, Bentley
11:40 P2 - Bentley mobile solutions in aplant perspective
Want to use tablets or phones toview plant data in the field? Want toknow where to get the apps? Learnabout Bentleys current portfolio ofmobile apps and mobile applicationstrategy.
W2 - MSTN WORKSHOPMicroStation & AutoCadinteroperability
I denne workshop ser vi på noglesmarte og meget hjælpsommeopsætningsmuligheder som gørsamspillet mellem MicroStation ogAutoCad lettere.Desuden kigger vi på håndteringen afDWG-modeller og -sheets iMicroStation
E2 - Civil cells.Turbo roundabouts andconventional roundabouts
This presentation will reveal some ofthe technical issues raised during theprocess of geometric design ofroundabouts using Civil Cells inSELECT Series 3. The overview offunctioning as well as the problemsthat occurred while creating andmodifying Civil Cell elements will bepresented from the point of view of anovice user.
12:30 Darren Guy, Bentley Lone Davidsen og Sven Ladefoged,COWI Aleksandra Wilczyńska, DTU student Jeff Martin & Ernst Vanbaar, Bentley
12:30
13:30
14:20
14:30 P3 - OpenPlant IsometricsManager for AutoPLANT advanced
Administration and configuration ofOPIM as well as customization ofisometrics in an AutoPLANT context
E3 - Den nye bane København-Ringsted - Erfaringer fraudbudspakker
Som den første anlægsbygherre iDanmark valgte Banedanmark atstille krav til samarbejde på tværs afleverandører, leverance af 3Dmodeller under hele processen, samtdokumentation af bygbarhed ogsporbarhed. Indlægget beskrivererfaringerne fra brug af dennearbejdsmetode og hvordanprocessen er blevet en integreret delaf godkendelsesprocessen fra udbudtil udførelse og as-built.
X3 - WORKSHOPTerrain Modeling
Intermediate - This workshopteaches how to display terrainmodels to view different source andcomputed features includingboundary's, triangles, contours, andthematic height illustrations. You willalso learn how to import graphicelements into terrain models, identifyand fix terrain model problems, andcombine multiple terrain modelstogether.
15:20 Magnus Cullberg, Bentley. Amir Bigdeli, konsulent for Banedanmark
15:30 Pause / Break
15:45 P4 - OpenPlant OrthographicsManager
OpenPlant Orthographics Manager isa useful tool in both OpenPlant andAutoPLANT. This is an introductionto the workflows, settings,configuration and customizationoptions available in OPOM
E4 - 3D CADmodeller tilmaskinstyring og planlægning afjordarbejde
Denne præsentation giver dig indbliki entreprenørernes verden; hvordande anvender 3D modeller tiloptimering, planlægning ogudførelse. Præsentationenindeholder en gennemgang afprocessen fra tilbud til udførelse ogde udfordringer som begrænsetdigitalt projektmateriale skaber.
16:35 Magnus Cullberg, Bentley. Jonas Wahlberg, Bentley Hjörtur Sigurðsson, Spotland Ernst Vanbaar & Rob Nice, Bentley
16:45
17:45
19:00
19:30 Middag / Dinner (Munkebjergsalen)
Ian Rosam , Bentley
Drinks (Munkebjergsalens foyer)
Frokost / Lunch
E1 - Bentley Civil Keynote
There have been a lot of exciting changes to the Bentley Civil products overthe last few months and years. But let's face it, sometimes it's hard to keepup! As always, this session will bring you up to date on these changes aswell as give you a glimpse into the future. If you want to know what's goingon with Bentley Civil, this is the session for you!
KEYNOTE: The CONNECT Edition: The Common Environment for Comprehensive Project Delivery(Munkebjergsalen)
Bhupinder Singh, Senior Vice President, Bentley Software
MANDAG9. NOVEMBER
BENTLEYUSER
Mødelokale 4+6
NORDIC CIVIL
F2 - Enhancements for RailDesign
Let's take a look at the new BentleyRail Track SELECTseries 4 whichis now built with OpenRoadstechnology. This allows rail designerto enjoy the benefits of rich 3Dmodeling environment, designintent, and dynamic updating.
Rob Nice, Bentley
X1 - WORKSHOPQuickStart for Roadway ModelingUsing OpenRoads Technology
Fundamental - This course is for bothnew users and users upgrading fromprevious versions of PowerCivil,Power GEOPAK, MX, and PowerInRoads software to use theOpenRoads Technology. You willlearn to model the roadway corridorusing an existing 2 lane urban typicalsection with curb and cutter andsidewalk, control the pavement withgeometry, and review the 3D corridormodel. You will also model a Tintersection complete with curbreturns and side slopes using a civilcell. Finally, you will place pavementmarkings on the model.
F3 - Best Practice: Geometry
This presentation provides bestpractices for working withOpenRoads geometry. Learn whydesign intent is important, when andhow to use Civil AccuDraw, how tocontrol the rules as well as import /export of native geometry.
Ian Rosam, Bentley
Bentley Café (Havestuen)
W3 - BIM WORKSHOPExplore the possibilities with theAECOsim Building Designer on asimple project
This hands-on training teaches youan overview of the possibilities withthe product including Architecturaldesign, solar- and structural analysis
Civil Café - Show, tell, and touch, Civil Mobile. (Fjordsalen)
F4 - Best Practice: BentleyRailSELECTSeries 4
This presentation will provide thebest practices to use with BentleyRail Geometry and dynamicCorridor Modeling. The highlightswill range from the fundamentals,enhancements offered inSELECTseries 4, leading into tipsand tricks, and other advancedtopics.
Skovsal A Skovsal B Skovsal C Munkebjergsalen09:00
TIRSDAG
10:20 Pause / Break
10:30 A5 - Line of Sight profiler dannet udfraGSTs punktskydata
I forbindelse med lokalplanlægning i Lyngbymåtte et nyt byggeri ikke kunne ses fraEremitage Slottet. Ved hjælp af Lidar data fraGSTs udarbejdelse af DHM blev der dannetlængdeprofiler til fastsættelse af højdegrænserfor delområder i lokalplanen. Projektet ernomineret til året Bentley Inspire i kategorienLand Development. Live demo.
B5 - The new Navigator
With Navigator your Model-based Review andCollaboration software, you can make betterdecisions, faster, throughout the lifecycle of aproject, while reducing project risk.
Demonstration of the brand new Navigator forBuilding designers and future development
C5 - ProjectWise and Civil3D
ProjectWise is fully integrated with AutoDeskCivil3D, but there are some issues that needsspecial attention.
Come and hear about the best pratices forProjectWise integration with AutoDesk Civil3D
D5 - Functional Components: CaptureDesign Intent in MicroStation CONNECTEdition
Come and learn what Functional Componentsare and why you should use them. Learn toadd your Design Intent directly to yourgeometry so its behaviour responds to change.Learn how to stop modeling multiple variationsof a 2D or 3D cell and start using a singleParametric Cell as the source of variations.Build up from constrained profiles to parametricsolids, using variables to drive parametric cells,then create libraries of Functional Componentsready to be placed in your designs.
11:20 Andreas Kirkby, LE34 Jonas Wahlberg, Bentley Mantas Nauseda, Bentley Makai Smith, Bentley
11:30 A6 - Metoder til at konvertere data mellemCAD og GIS i Bentley Map
Metoder i Bentley Map til at konvertere GISdata til CAD data og vice versa. Anvendelsenaf standard MapDefinition, MapDefinitionsExport to Microstation og Promote. Le34 sværktøj til datakonvertering vises også.
B6 - AECOsim Building Designers toAnalytical Space Model
Learn how to use AECOsim Building Designerto create an Analytical Space Model (ASM) tobe able to perform an Energy analysis on yourproject.
C6 - ProjectWise Deliverables Managementwith Project Performance Dashboards
Managing Transmittal, Submittals, Request ForInformation (RFI's) and Transmittal FormsLetters with the new ProjectWise DeliverablesManagement.
D6 - Navigator CONNECT Edition
Does your project have a need for designreview and model collaboration across offices,sites, and the field? You will learn how the nextgeneration - CONNECT of our popular BentleyNavigator application and Navigator Mobileapp fulfill these project needs.
12:20 Anders Sorgenfri Jensen, LE34 Karsten Pudziow, Bentley Susan Brandt & Darius Perminas, Bentley Jonas Wahlberg, Bentley
12:30
13:30 A7 - Bentley map Mobile, The story so farand beyond
A new bunch of features have come to BentleyMap Mobile: Measuring tool, Snap and virtuelmouse, incremental update of datasets,redlining, fieldnotes, and mark up, photos andvideos geotagged etc.You are also going to hear what the plans arefor the future of Bentley map Mobile, andBentleys other mobile solutions.
B7 - Generative Components for ABDIntroduction (Advancing BIM withComputational Design)
In this session we take a look at the new GC -Generative Components integration inAECOsim Building Desinger and learn the firststeps in creating a parametrical model
C7 - How to tune your ProjectWise DesignIntegration installation
What can you do to make your installation runfaster? Caching Server? Second Datasource?Second Integration Server? Second SQLserver? And what about latency?
D7 - I-models
Directly produce i-models on the desktop fromyour preferred design environment, includingMicroStation, other Bentley or non-Bentleysoftware products or via a free iWare plug-in,and through the Bentley i-model Composer
But what is an I-model exactly? How are theycreated, and to which purpose?
14:20 Gijsbert Noordam, Bentley Karsten Pudziow, Bentley Marty Nickel, Bentley Jonas Wahlberg, Bentley
14:30 Pause / Break
14:45 A8 - Publish data to Bentley Map Mobileand get field redline and notes back
Demo of the new Bentley Map MobilePublisher which now is integrated into theInteroperability menu (former known as theGIS in- and export)See how redlines and markups are returned toBentley Map
B8 - Dynamic Views vs. Cached VisibleEdges
This lecture will demystify the differencebetween a Dynamic view and a Cached view.
It will outline the advantages of each andprovide tips and tricks for managing yourcached views.
C8 - Setting up I-model Composition Server
With project information created in varyingformats using multiple applications, i-modelComposition Server enables users toaggregate that information into a commonsharable format.
Learn how you configure the i-modelComposition Server when setting it up forgenerating i-models and PDF's
D8 - Enhancing annotation in MicroStationCONNECT Edition
MicroStation CONNECT Edition continues tobuild upon an already broad and extensiveportfolio of annotation tools. Discover new andenhanced annotation tools to more clearlycommunicate your designs. Improve projectdeliverables by consistently and preciselyillustrating design intent with confidence andspeed. Get a closer look at new and coolcapabilities like placing Labels, Sheet Indexing,Notes, and Tables which will allow your teamto better embellish a set of plans
15:35 Gijsbert Noordam, Bentley Karsten Pudziow, Bentley Marty Nickel, Bentley Makai Smith, Bentley
15:45 Afslutning af Årsmøde - Nordic Civil will continue
16:10
17:00
17:10
18:00 Anders Sorgenfri Jensen, LE34Gijsbert Noordam, Bentley
19:30
10. NOVEMBER
KEYNOTE:
MicroStation CONNECT Edition (Munkebjergsalen)
The new version of MicroStation CONNECT Edition is one of the most substantial releases in its history. During this presentation, Makai willexplain the concepts behind its evolution and how it will help you better connect with project teams, create intelligent 3D parametric models, andmore efficiently create accurate drawings, reports, and 3D deliverables.Makai Smith, Senior Product Manager, Bentley
Middag (Fjordsalen)
Frokost / Lunch
A9 - GeoSpatial SIG meeting
An unformal meeting where we talk about newand old issues, how-to and tips & tricks
Tree-Top 1 Tree-Top 4 Fjordsalen Mødelokale 3+509:00
TIRSDAG10. NOVEMBER
10:20
10:30 P5 - I-model transformer
See the power of i-model transformerand learn how to extract plantinformation from i-models or evenmodify them
E5 - Brug af SELECTseries 4 påNordhavnsvej tilkoblingsanlæg
Rambøll har i forbindelse medudarbejdelsen af Nordhavnsvejen,tilkoblingsanlægget vedSvanemøllehavn anvendt bådeInRoads SS2 og SS3/SS4. Dennepræsentation vil tage udgangspunkt ide udfordringer og løsninger som harsikret at projektet kunne bevares iInRoads SS2, såvel som sikreudnyttelse af de nye værktøjer stillettil rådighed i InRoads SS3/SS4.
11:20 Magnus Cullberg, Bentley. Johannes Andersen, Rambøll
11:30 P6 - OpenPlant SupportEngineering
OpenPlant Support Engineering is anew tool to create realistic supportsfrom a vast catalog and automaticallygenerate support drawings
E6 - Erfaring i anvendelse af SS4 –eksempel med byggemodning
I denne præsentation vises hvordanveje og stier i en byggemodning kanopbygges med OpenRoads. Deranvendes både traditionel corridormodeling og linear templates,herunder Orbicons erfaringer ibrugen af OpenRoads.
12:20 Magnus Cullberg, Bentley. Niklas Thillgren, Bluebeam Martin Hansen, Orbicon Rob Nice & Ernst Vanbaar Bentley
12:30
13:30 P7 - Bentley Data Manager
See how Data Manager can help youto be more efficient in your work withAutoPlant and OpenPlant, extendedreporting capabilities, datamanagement, datasheets etc
W7 - MSTN WORKSHOPMicroStation CONNECT Edition -Hands on
Come and have an exclusive look atthe next major MicroStation releaseand get a chance to familiariseyourself with the new interface.
(repeating workshop of W1)
E7 - Advantages of ImplementingSubsurface Utility Design andAnalysis (SUDA)
In this session we’ll walk through theadvantages of adding SUDA to yoursoftware solutions. We’ll explore howto migrate to SUDA or how SUDAcan enhance some current solutions.Finally, we’ll explore some bestpractices for implementing SUDA.
14:20 Magnus Cullberg, Bentley Mieke Pol, Bentley Jonathan Smith, Bentley
14:30 Pause / Break
14:45 P8 - How to work with Bentleysupport
Understand the inner workings of theProduct Advantage Group and howbest to work with them. Learn what isnew in Bentley Communities.
W8 - MSTN WORKSHOPGeo-coordination
Integrating geospatial data frommultiple sources is labor-intensivewhich can result in misalignment andout-of-context information. Masterthe ability to apply MicroStation'sGeo-Coordination features tospatially reference your designgeometry within a geodeticreferencing system.
E8 - Save Time and Money withSubsurface Utility Design andAnalysis (SUDA) Model
See the drainage design capabilitiesof Subsurface Utilities Design andAnalysis in action. See hydraulicscalculations from basic to advanced,in one package. Hydrauliccapabilities are integrated withOpenRoads, including high definition3D Models
15:35 Darren Guy, Bentley Mieke Pol, Bentley Jonathan Smith, Bentley Ernst Vanbaar & Ian Rosam, Bentley
15:45
16:10 E9 - Design checks for Danishroad and rail
The way Design Checks work havechanged significantly with the OpenRoads Technology. Learn how theDanish Road and Rail Standardshave been implemented and how anew style sheet will give you a reportthat may be sent directly toBanedanmarks Teknisk Drift as adocumentation for the rail track.
17:00 Marianne Rask, Vex / Li Peng, Niras
17:10
18:00 Jonathan Smith & Jeff Martin,Bentley
19:30
Dan Ahern, Bentley
F9 - Best Practice: Scanned DataCapture it's value and use in thecivil model
Data capture is on the increasethrough a variety of formats. Thissession will explore these formatsto allow the user to takeadvantages of wealth of informationon offer without feelingoverwhelmed managing them.
Pause / Break
F8 - Creating a Realistic Modelwith Pavement Markings, Signs,and Other Objects
It used to be that, in order to createa realistic 3D model, you had to bean expert. But now, withOpenRoads and MicroStation,every user can easily create high-quality renderings and animations.This session will cover the differenttoolsets used to make that happen.
X9 - WORKSHOPQuickStart: Evaluating andCreating Subsurface Utilities
Fundamental - This class introducesyou to the evaluation tools forutilities, including labeling andreports. We run a clash detectionjob, and layout inlets and pipes
F7 - Where Do I Start? FeatureDefinitions
This presentation focuses on thefundamental aspects ofunderstanding feature definitionswithin OpenRoads. It will explainwhat feature definitions are, how tocreate them, and how to use themin OpenRoads. Are you used tomanaging and/or editing the XIN-filein SELECTseries 2, this is the placeto be for you when you move intoSELECTseries 4.
Rob Nice, Bentley
KEYNOTE:MicroStation CONNECT Edition (Munkebjergsalen)
NORDIC CIVIL
Mødelokale 4+6
BENTLEYUSER
W5 - WORKSHOPDigital Workflows with Bluebeam
This workshop will provideparticipants with an overview of thekey features of Bluebeam® Revu®and how to utilise Revu toelectronically review a document andcollaborate in real time.
Learning Objectives:
1. Participant will be able to navigatethe Revu interface by zooming,panning, viewing multiple-pagedocuments, splitting screens andsyncing the view, and opening upcommands in toolbars and tabs.2. Participant will be able to add abasic stamp to single and multiplesheets of a PDF, and create acustom stamp with dynamicinformation.3. Participant will be able to useBluebeam Studio to collaborate andshare documents with others in realtime.
Frokost / Lunch
X5 - WORKSHOPWorking in BentleyRailSELECTseries 4
Learn and explore the new BentleyRail Track SELECTseries 4. Examinehow to use the geometrics containedthe ALG file in the new “OpenRail”modeling environment. This willincluded managing horizontal,vertical, and cant geometries with thenew Corridor Modeling tools.
Ian Rosam, Bentley
F6 - Best Practice: EarthworkVolume Calculations
No job is complete until you canprovide the owner/operator the costto make your design a reality. Civilprojects are no different. Learn tosee how the OpenRoads tools canprovide the earthwork and materialquantities for your next project.
X7 - WORKSHOPCross Sections: Creating,Annotating, and Volumes
Intermediate - This workshopteaches how cross section sheetsare created and annotated,earthwork volumes are computed,and mass haul diagrams areformulated.
F5 - Corridor Modeling
This presentation will provide thebest practices to use CorridorModeling successfully in theOpenRoads environment. Thehighlights will range from thefundamentals, enhancementsoffered in SELECTseries 4, leadinginto tips and tricks, and otheradvance topics.
Jeff Martin, Bentley
Ian Rosam, Bentley
Middag (Salon 2+3)
Ian Rosam, Bentley
E10 - Best Practice: Large projects - working with reference files
Take a look on how file federation will allow you to handle large projects.Examine how file structure and referencing can benefit you during aprojects lifecycle. Also look into other factors that will streamlineperformance of models to aid you on starting new projects in way that theywill scale to meet your needs as the project grows.
Tree-Top 1 Tree-Top 4 Skovsal A Mødelokale 3+5
ONSDAG11. NOVEMBER
09:00 E11 - WORKSHOPSpatial function in ProjectWiseDesign Integration
What is the spatial function and whatcan I use it for? Learn how to setupspatial maps, searches andsymbology.
09:50
10:00
10:50 Dan Cutler, Bentley Mieke Pol, Bentley Bill McNamara & Marty Nickel, Bentley Jeff Martin & Ernst Vanbaar, Bentley
11:00 Pause / Break
11:10 E13 - WORKSHOPAutomating metadata for betterperformance
You can automate some of yourmetadata during project setup toachieve a better performance.
12:00
12:10
13:00 Dan Cutler, Bentley Mieke Pol, Bentley Marty Nickel & Mantas Nauseda, Bentley Rob Nice & Dan Ahern, Bentley
13:00 Frokost / Lunch
14:00
14:50
15:00
15:50 Dan Cutler, Bentley Mieke Pol, Bentley Rob Nice & Ian Rosam, Bentley
BENTLEYUSER PLUS-DAGWORKSHOP DAY
F15 - WORKSHOPBringing data fromSELECTseries 2 toSELECTseries 4
This presentation led workshopdiscusses the best practices formoving existing project data to theOpenRoads environment. Whileimporting the data is easy, there areconsiderations you need to makedepending how the data will beused. We will discuss terrainmodels, geometry, RoadwayDesigner corridors, and much more.
Please note that this workshop willtake place in SKOVSAL A
Mødelokale 4+6
F11 - Keynote revisited? /Keynote on a closeup
This presentation will lookback atthe Civil Keynote and provide opendiscussion on what CONNECTmeans for Bentley Civil.
Ian Rosam, Bentley
F12 - What's New in the CivilWorkspace
Explore several powerfulenhancements made to thedelivered Civil examplesworkspace. Custom view controls,3D guardrail modeling andpreliminary planning features, just toname a few. This is a must attendfor anyone developingorganizational workspaces.
NORDIC CIVIL WORKSHOP
X15 - WORKSHOPModeling
This presentation led workshop willhelp you get a Complete Model ofyour design. It is more than justgrading a pad along a road, ordesigning a site that has a road.Come see how the tools offered inOpenRoads allows you to take yourmodel to new limits by providing toolsthat are geared to bring your modelsto life.
Dan Ahern, Bentley
X11 - WORKSHOPTemplates
Intermediate - This workshopcovering Templates will focus on thedefinition of the template backbone,it's use and editing for detailedcorridor model design.
You will gain an understanding oftemplate construction and thegoverning rules that control thetemplates definition and how itapplies in the model.
X13 - WORKSHOPUsing Civil Cells in OpenRoads
Intermediate - This course is for bothnew users and users upgrading fromprevious versions of PowerCivil,Power GEOPAK, MX, and PowerInRoads software to use theOpenRoads Technology inSELECTseries 3 & 4.
You will learn the basics of placingcivil cells. This includes gaining anunderstanding of what civil cellreferences are and how to use themin a practical workflow. You will learnto use the civil cells delivered withthe product, as well as how to usecivil cells taken from external sourcesand incorporate them into yourmodels.
You will learn to edit and re-use civilcells that have been placed within amodel. Before completing thiscourse, we recommend you completeboth the QuickStart for Terrain &Geometry Using OpenRoads as wellas the QuickStart for RoadwayModeling Using OpenRoads courses.
Ian Rosam, Bentley
Ian Rosam, Bentley
F14 - Why are Integrated Civil i-Model's a Better Option toExchange Data?
Discover Bentley's integratedworkflow for transportation designand construction. Explore thestreamline process in taking yourBentley 3D OpenRoads modelsdirectly to a Civil I-Model. Bentley’snew Infrastructure ConsensusModel (ICM) will allow thecontractor to use your designinstead of recreating it from scratch.
W11 - WORKSHOPMicroStation CONNECT EditionLEARNing day
In this all day Learning workshop,you will learn how to gain efficienciesin your project workflows usingMicroStation CONNECT Edition
You will have to sign up (W11) forthe full day to take part in this all dayLearning workshop
The workshop will begin with anexplanation of the new ribboninterface in MicroStation CONNECTEdition to help you becomecomfortable navigating through thesoftware and easily locate the toolsyou use every day.
Continues below..
P11 - WORKSHOPContext Capture
Context Capture/Acute3D is aphotogrammetric software thatcreates point clouds from digitalphotos, wether these are take from adrone or a handheld camera.
Learn how to use this new tool thatsoon will be an essential part of thepoint cloud workflow
W11 - Continued
You will also learn at theMicroStation CONNECT Edition allday workshop how MicroStation’sProperty Driven Display, Annotation,Reports, and Sheets (part of theDocumentation Center) can save youtime and money when labeling,reporting, or changing the display ofthe elements or objects.
You will learn how reporting extractsand presenting of data fromproperty-based drawings ensurecoordinated and consistent tables,exports to Excel, Bill of Materials,and more, based on your projectconditions. Learn how Display Rulesenable a set-and-forget environmentwhere the geometry is always up todate.
Jeff Martin & Ernst Vanbaar, Bentley
Pause / Break
P13 - WORKSHOPWork with Point Clouds using thenational wide free point cloudsfrom the Danish Geodata Agency
GeoDataStyrelsen have Lidarscanned all Denmark with a averagepoint distance of 40 cm.
This workshop we use Descartes(and maybe Pointools) to work withthese free data sets.
W11 - ContinuedP15 - WORKSHOPUsing Point Clouds in Civil/GeoWorkflows
Learn how Descartes can assist inyour civil workflow, with tools todefine the class of points within thepoint cloud. You can geocoordinatepoint clouds, and extract linearfeatures like rail, tunnels or roads.See how you can run clashdetection.
F13 - Best Practice: Terrainmodeling
This presentation provides bestpractices for working withOpenRoads terrain. During thissession you will learn about therules that define Terrain Models,the different Terrain Models typesand how to manage Terrain Models.
Foreningen har også i år arrangeret en mindre udstilling i foyerområdet ud for Munkebjergsalen:UDSTILLING:
udførelse, af en bred vifte af projekter world wide.
virksomhed, tilfører vi virtuelle miljøer til design og drift workflows og sikrer derved en problemfri
byggeri og anlægsarbejder, til tekniske anlæg og installationer. Som del af en global rådgiver
anvender de nyeste teknologier og leverer digital dokumentation og opmåling af alt fra, COWI
OVERSIGTSPLAN OVER MUNKEBJERG:
hvad enten det er til mobilGIS, digitale planer eller 3D modeller.
herunder Bentley software. Sammen sikrer vi fuldstændige løsninger fra marken til slutresultat,
leverer opmålinger, 3D scanninger og sælger avancerede GIS og CAD applikationer, LE34
og totalstationer samt maskinstyring til forskellige brancher.
leverer fuldstændige løsninger, instrumenter og software inden for 3Dscanning, GPS GEOTEAM
forbindelse med omsætning og drift af fast ejendom.
anlægsarbejder mv., ejendomsdannelse og ændringer af ejendomsgrænser samt rådgivning i
præsentation af geografiske informationer, herunder fysisk planlægning, opmåling ved bygge- og
arbejdsområder ligger inden for indsamling, bearbejdning og LIFA A/S Landinspektører’s
ligeledes produkter til mange forskellige platforme.
og Inroads med undervisningssteder i København, Aarhus og Esbjerg. Geopartner udvikler
kursuskatalog i Bentley programmer primært i MicroStation, BentleyMap, Powercivil for Denmark
er Channel Partner for Bentley og tilbyder konsulentydelser og har et omfattende Geopartner
med offentlige instanser.
verdens førende arkitektvirksomheder, ingeniørvirksomheder, og konstruktionsfirmaer sammen
formatet. Vores prisvindende PDF-skabelse, markerings- og redigeringsløsninger anvendes af
laver smarte, enkle løsninger til papirløse arbejdsgange der udnytter PDF Bluebeam Software
bygninger til broer, transport til forsyning, ren energi til rent vand - Bentley opretholder infrastrukturen.
behovene for ingeniører, arkitekter, planlæggere, entreprenører, operatører og driftorganisationer for
leverer omfattende softwareløsninger til hele infrastrukturens livscyklus, skræddersynet til Bentley
.
produkter, som kan kombineres i pakker skræddersyet til dine specifikke arbejdsforhold krav.
oven på Bentley MicroStation platformen og Terrasolid tilbyder forskellige udgaver af sine software
har brug for at behandle og udnytte 3D LIDAR data og billeder. Terrasolid applikationer er bygget
udvikler software til behandling af luftbårne og mobile LIDAR data og billeder til alle, der Terrasolid
INDLÆGSHOLDERE OG DELTAGERE FRA BENTLEY:
Collaboration Product and Services
Vice President ProjectWise
Susan Brandt
Transportation & Local Infrastructure
Account Director
Stefan Sigvardsson
Civil
Senior Application Engineer
Robert Nice
MicroStation
Senior Training Specialist
Mieke Pol
ProjectWise
Global PRT Lead
Marty Nickel
ProjectWise
Regional Manager
Mantas Nauseda
MicroStation
Senior Product Manager
Makai Smith
Plant
Application Engineer
Magnus Cullberg
BIM
LEARNing Consultant
Karsten Pudziow
Civil
Senior Product Engineer
Jonathan Smith
BIM
Application Engineer
Jonas Wahlberg
Civil
Senior Training Specialist
Jeff Martin
Civil
Senior Product Manager
Ian Rosam
GeoSpatiel
Senior Product Manager
Gijsbert Noordam
Civil
Application Engineer
Ernst Vanbaar
Plant
Senior Application Engineer
Darren Guy
ProjectWise
Product Manager
Darius Perminas
GeoSpatiel
Application Engineer
Dan Cutler
Civil
LEARNing Consulting Manager
Dan Ahern
Information Management
Director Product Management
Bill McNamara
Bentley Software
Senior Vice President
Bhupinder Singh
Årsmøde.
formidling og arrangementer som dette
udveksling bl.a. gennem SIG-møder, web-
mens SIG-formændene varetager den faglige
daglige ledelse af foreningens virke og økonomi,
En bestyrelse på 5 medlemmer varetager den
og krav til Bentleys produkter.
dels ved at understøtte medlemmernes ønsker
grupper - SIG'er - inden for forskellige emner,
Det gøres dels gennem dannelse af interesse-
og mellem medlemmerne.
er at formidle viden, kontakt og informationer til
i deres professionelle virke. Foreningens formål
hvis medlemmer benytter Bentleys programmer
bentleyuser.dk er en uafhængig brugerforening,
bentleyuser.dk
hjemmeside.
udbygning af foreningens
Drift, vedligeholdelse og
Københavns Lufthavne
Michael Friis Ørsted,
Web/Marketing:
og betalinger.
kontingentopkrævning
årsregnskab og budget,
Løbende regnskab,
PLH Arkitekter
Claus Johannesen,
Kasserer:
.Årsmødet
praktiske arrangement ved
og dokumentarkiv, står for det
vedligeholder medlemsregister
formandsmøder,
til bestyrelses- og
udsender mødeindkaldelser
Referent på foreningsmøder,
Københavns Universitet
Anette Persson,
Sekretær:
samt af øvrige foreningsmøder.
koordinering af SIG'arbejdet,
står for Årsmødekoordinering,
Formandens stedfortræder,
Sweco
Michael Jepsen,
:Næstformand
rejsearrangementer.
står for foreningens
generalforsamlinger og
sikrer afholdelse af
relevante foreninger,
kontakt til leverandører og
Tegner foreningen, har
COWI
Carsten Ahm,
Formand:
Plot SIG
Plant SIG
MicroStation SIG
GeoSpatial SIG
Data Management SIG
Civil SIG
BIM SIG
håndtering af plottere og anden hardware.
publicering af intelligente digitale dokumenter og
Packs, MicroStation Print Organizer mv., samt for
ProjectWise Dynamic Plot, ProjectWise InterPlot Driver
ProjectWise InterPlot Server, Digital Print Room,
plotteprodukter ProjectWise InterPlot Organizer,
for at udveksle erfaringer og viden inden for Bentleys
Formål: At skabe et forum for PLOT SIG'ens medlemmer
Formand Frank Møller Christensen, Rambøll
plant-værktøjer.
OpenPlant, AutoPLANT, PlantSpace og generelle
og viden inden for Bentley Plant produkter så som
Formål: At skabe et forum for udveksling af erfaring
Formand Kenn Boemann Hansen, NIRAS
At skabe et brugernetværk om Microstation.
Formål: At udveksle brugererfaringer om Microstation
Formand Morten Sørensen, Vejdirektoratet
af GEO-data mv.
fremstilling af konkrete produkter, Dataadministration
andre systemer, Databaser, ideer og erfaringer med
områder med udgangspunkt i Dataudveksling med
Geospatial produkter, samt GEO-relaterede arbejds-
for at udveksle erfaringer og viden inden for Bentley
Formål: At skabe et forum for GEO SIGens medlemmer
Formand Anders Sorgenfri Jensen, LE34
dokument- og vedligeholdelsessystemerne giver.
de udfordringer applikationer der er understøttet i
ProjectWise og AssetWise. Desuden diskuterer SIG’enog vedligeholdelsessystemer med udgangspunkt i
et bredt forum. Erfaringer vedr. dokumenthåndtering
Formål: Muligheden for at diskutere data håndtering i
Formand Finn Mejding, Atkins
efter brugernes ønsker.
og herved være med til at præge produktudviklingen
At videregive medlemmernes ønsker til leverandøren
viden inden for Bentleys anlægsrelaterede applikationer.
applikationer. At formidle information og udveksle
til daglig arbejder med Bentleys anlægsrelaterede
Formål: At skabe et forum for de medlemmer, som
Formand Lene Westh, Rambøll
og anlægsejere.
udførende, myndigheder, offentligheden og bygnings-
imellem aktørerne i byggeri og anlæg, for projekterende,
Ligeledes at styrke det digitale samarbejde
visa versa.
til arbejdsgangen: fra model til virkelighed og
arbejdsgange forbundet med BIM, særligt i forhold
designmodeller, samt at styrke forståelsen af
Formål: At skabe et forum for brugen af intelligente
Formand Mikkel Bennedbæk, Atkins
Der bliver arrangeret gratis bustransport mellem hotellerne.
blive tildelt værelse på et andet hotel i nærheden.
Når alle værelser på Munkebjerg er besat, vil senere tilmeldte
Hotelværelser tildeles efter først-til-mølle-princippet.
Tilmelding er bindende.
Tilmelding via foreningens webside: www.bentleyuser.dk
Senest fredag d. 23. oktober 2015
TILMELDING:
Tillæg for ikke medlemmer 1.000,- d.kr.
Ikke medlemmer:
reduceres prisen med 300,- d.kr. pr. sparet overnatning.
Hvis du ikke ønsker overnatning,
Mandag-onsdag - 2 middage og 2 overnatninger: 5.700,- d.kr.
Mandag-tirsdag - 1 middag og 1 overnatning: 4.100,- d.kr.
Medlemmer af bentleyuser:
PRIS:
www.munkebjerg.dk
Telefon +45 76 42 85 00
7100 Vejle
Munkebjergvej 125,
Munkebjerg Hotel,
STED:
kl. 9.00-16.00Onsdag d. 11. november
kl. 9.00-18.00Tirsdag d. 10. november
kl. 9.00-19.00Mandag d. 9. november
TID: