Embed Size (px)
Citation preview
1ta3t
S-TYPEHOIST GUIDE
■WarrantyImmediate repair and/or part replacement shall be provided for breakage/poor condition to be clearly considered as our responsibility and to be generated within one year after our delivery from our factory. And only if the claimed defect arose during normal use, applications and service.Consumable parts and their replacement shall be out of our warrantee.However, the following cases shall not be warranted.(1) In case of operating with % ED rate exceeding the limit and very high frequency.(2) In case of operating with the load more than the rated load.(3) In case of modifying the products and/or accessories without our approval.(4) In case of operating under very severe conditions exceeding the conditions of their specifications.(5) In case of operating, neglecting Caution/Danger items mentioned in this operation manual. Any damage for production down to be caused by saddle damage shall not be warranted.
We will not supply any parts that become inoperative because of improper maintenance, eccentric loading, overloading, chemical or abrasive action, excessive heat, or other abuse.Equipment and accessories not of our manufacture are warranted only to the extent that they are warranted by the manufacturer, and only if the claimed defect arose during normal use, applications and service.EXCEPT AS STATED HEREIN, WE MAKE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.“Normal use, applications and service”: Those conditions during which a electric hoist, other products, equipment or accessories is (are) being operated and is (are) performing functions within the scope of the original design.
CautionDo not use our electric hoist or other products in an explosive atmosphere or corrosive environment.
Do not use our electric hoist or products for passenger elevator application.
Printed in Japan G.13.11.5.DP
Our products are exempted from the scope of guarantee if exported to other nations regulated by the PL law
than Japan.
HEAD OFFICE5-31, TAGAWA 2-CHOME, YODOGAWA-KU,OSAKA 532-0027, JAPAN TEL:06-6308-3861FAX:06-6308-6580
TOKYO OFFICE1554-1, SAKAE-CHO, YOSHIKAWA-CITY,SAITAMA 342-0050, JAPANTEL:048-984-6881 FAX:048-984-6884
AYABE FACTORYENSHO, 1, TAKATU-CHO, AYABE-CITY, KYOTO 623-0045,JAPAN TEL:0773-42-1270 FAX:0773-42-6551
Advanced technology and dedicated service
E-mail [email protected]
●Ordinary type
●Low headroom type
●Double rail type
●Ordinary type (18m)
●Inverter type
1 2
S-TYPE HOIST
Ordinary type
Low headroom type Double rail type
● A type ● C type (optional)
■Standard Specification
1. Compact design with small number of parts assures easy assembling, disassembling and maintenance.
2. Low headroom structure expands working space.3. New hoisting mechanism with helical gear has reduced the
noise.4. Specially designed host-motor with less power
consumption.5. Magnetic contactor with mechanical interlock suits inching
operation. Electrical interlock also prevents misuse safely.6. Hook has punch marks showing the original distance of
hook opening for the convenience of maintenance.7. Small and light push-button switch of ABS resin
(rainproof construction).
●
●
Magnet brakeDisc type DC magnet brake for both lifting and traversing.Waterproof brake disc needs almost no adjustment of the break.
Dual upper limit switchFirst step to cut operation circuit to stop lifting. Just in case of reverse phase operation, reverse winding or short circuit, second step (for emergency) cuts main circuit.
■Monorail Size (I-beam)
Rated Load Flange width (mm)
1t
2t
3t
100, 125※※, 150, 175※
125※※, 150, 175※
125※※, 150, 175※
※Please make contact beforehand. If flange width is not specified, the rail in the ※※-mark width will be shipped.
Flange width
Three-phase 200V 50/60Hz, 220V 60Hz, 380V 50Hz
Pendant control unit for floor-operation
Power source
Control
30 minute ratingRating
Cable or trolley (collector is option)Power supply method
From –5°C to +40°CService temperature
Dustproof typeProtective structure
25%ED (JEM1393, Measuring methods
for temperature rise of electric hoists
at periodic duty rating)
Duty rating*
Munsell 5GY5.5/6.5
JIS C 9620 (Electric Hoist) and
Japanese Construction Codes for Crane
Pertinent standards
200 starts per hourNumber of starts
Paint color
■Features ■Safety device
Select the height at the time when the hook reached the ground.It is regulated that more than two rounds of wire should remain on the drum at the lowest position.
Before selecting hoists, investigate operating and environmental conditions.1.｢Capacity｣ How many tons is the lifting load ?2.｢Lifting｣ How many meters is the lifting height ?3.｢Operating conditions｣ Indoor or Outdoor ?4.｢Application｣ Up and Down, Up/Down and Left/Right, or Up/Down Plus East/West/South/ North (Crane operation) ?5.｢Power supply｣ How many voltage and 50Hz or 60Hz ?
Rated load shows the maximum load which hoist can lift up.Over load can not be admitted by the relative laws and regulation.The most suitable normal load is 50-63% of the rated load for safety and long time operation.
Lifting height is the height to lift up the load.
CLASSIFICATION OF LIFTING DEVICE
Load rate
Total operating hour(Average daily operating hour)
Lessthan800
(≦0.5)
More800 Less1600(≦1)
More1600Less3200(≦2)
More3200Less6300(≦4)
More6300Less
12500(≦8)
More12500Less
25000(≦16)
Morethan
25000
(16＜)
Light load
Medium load
Heavy load
Extra heavy load
A
A
A
B
A
A
B
C
A
B
C
D
B
C
D
E
C
D
E
F
D
E
F
F
E
F
F
F
Normally less than 50% of rated load.Seldom at rated load.
Normally more than 50% and less than 63% of rated load.Sometimes at rated load.
Normally more than 63% and less than 80%.Often at rated load.
Normally more than 80%.Mostly at rated load or nearly rated load.
0% 100%
100%
Load
hour
0% 100%
100%
Load
hour
0% 100%
100%
Load
hour
0% 100%
100%
Load
hour
■APPLICATION EXAMPLE OF LIFTING DEVICE CLASS TO VARIOUS CRANECRANE TO BE APPLIED CLASSIFICATION OF LIFTING DEVICE, ETC.
Crane for Electric power generating station useCrane for Disassembly and inspection use
Crane for Machine and Erection plant use A
B - D
D - F
B - C
A
Crane for general plant
Overhead travelling crane (with bucket and with magnet)
General bridge type crane
■HOIST CLASS, ED RATE AND STARTING FREQUENCY
S
TYPE CLASS
C 25
ED RATIO(%ED)
STARTINGFREQUENCY
(Time/hour)
200
SPECIAL OPERATING CONDITIONSThere would be case where the standard hoist can not be used according to operation and/or environmental conditions. KAMIUCHI have been manufacturing lots of special hoists in order to comply with wide requests from our customers. Pay attention to the following conditions.
1. Different voltageInstruct voltage and frequency other than standard power supply 3 phase AC200V 50/60Hz and AC220V 60Hz.
2. Designation of control voltageIn case of different voltage and less than 200V, a transformer is to be required and so instruct it to us.
3. Operating environmentIndoor operation is a standard. In case of outdoor operation, the housing is necessary. Standard specification can be applied to small amount of dust. Special specifications are to be required for applications where acid and/or steam exist. No anti-explosive type is available.
4. Alteration of speedIn case both low or high speed is to be required, there is a case that the modification can be made with the same model or a case that the alteration of the model is necessary.
5. Lifting height (R type - K type)In special high lifting head type of semi-standard type, the lifting height up to 45m is standardized.(In case of double rail type, up to 36m)
6. Stationary typeStationary type, which can be used as winch, is manufactured separately.
APPLICATION OF CONSTRUCTION STANDARDS
3 4
※Dimensions E and Q vary with the rail width.
●Specification
1t～3t1t～3t
●Specification
Lower flange
A B F E
H
LK1
K2
W
NW
Lower flangeU
D C
H
N
T
L
A B
E
Q
※Dimensions E and Q vary with the rail width.
●Specification
U
Q
●Specification
1t～3t
YR
C
A B
M
L
H
K
D E
F
T
G
N1N2
F E
N
A
M
B
R
φ32
K1
K2
LH
S
• Motor trolley hoistOrdinary type • Motor trolley hoistLow headroom type • Motor trolley hoistDouble rail type • Suspended hoistOrdinary type
3t
1t 2t 3t
SMT-1ANN
6
SMT-1AHNN
12
SMT-2ANN
6
SMT-2AHNN
12
SMT-3ANN
6
SMT-3AHNN
12
8 10
Standard I beam width (mm)
Min. Radius
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.10(6.0)0.12(7.2)
1.5
4
50Hz
60Hz
kW
Pole
50Hz60Hz
60Hz
LHABEFQWUNK1
K2
S
600075036039033532050
180140φ100
60500
1200075046051033532050
282140φ10012011010
600093039044033533050
180140φ100
60500
1200093050057033533050282140φ10013010015
125 125
12.56000103042047033535050
180140φ100
70500
12000103053062033535050
282140φ10015010020
125
0.3
8
3.63.0
3.02
6×37
6.37.0
6.3
11.512
11.5
1617
16
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
0.35(21)0.42(25)
200V200V
220V
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
150
2mR
180
3mR
230
2mR
270
3mR
300
2mR
350
3mR
0.098(5.9)0.12(7.1)
2.6
0.097(5.8)0.12(7.0)
3.7
1t 2t 3t
SMT-1ALNN
7.8
SMT-1ALHNN
12
SMT-2ALNN
6
SMT-2ALHNN
9.8
SMT-3ALNN
7
SMT-3ALHNN
11
56×W (19)
8
Standard I beam width (mm)
Min. Radius
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.10(6.0)0.12(7.2)
1.5
4
50Hz
60Hz
kW
Pole
50Hz60Hz
60Hz
LHABEQWUNDCT
780045050047033550
180140φ10031036070
1200045061058033550
180140φ10031036070
600055056051033550
282140φ10036042080
980055067063033550
282140φ10036042080
125 125
9700065060055033550
282140φ100400400100
1100065072067033550282140φ100400400100
125
0.3
8
3.63.0
3.04
6.37.0
6.3
11.512
11.5
1617
16
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
0.35(21)0.42(25)
200V200V
220V
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
190
2mR
220
2mR
300
3mR
350
3mR
380
3mR
460
3mR
0.098(5.9)0.12(7.1)
2.6
0.097(5.8)0.12(7.0)
3.7
6×37
1t 2t 3t
SH-1AN
6
SH-1AHN
12
SH-2AN
6
SH-2AHN
12
SH-3AN
6
SH-3AHN
12
8 10
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.10(6.0)0.12(7.2)
1.5
4
50Hz
60Hz
kW
Pole
50Hz60Hz
60Hz
LHABEFMφNK1
K2
RS
60070036039019532022032
1666050330
1200070046051019532028032
1661201103310
600088039044019033022032
16660503310
1200088050057019033028032
1661301003315
110 190
12.5600098042047021535022032
1667050330
12000980530620215350280321661501003320
260130 230 300
2
6.37.0
6.3
11.512
11.5
1617
16
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
200V200V
220V
50Hz
60Hz
kW
Pole
200V200V
50Hz60Hz
FallsConstructionDia (mm)
0.098(5.9)0.12(7.1)
2.6
0.097(5.8)0.12(7.0)
3.7
6×37
3t
SMT-3CDNN
7
SMT-3CDHNN
11
9
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
4
50Hz
60Hz
kW
Pole
50Hz60Hz
60Hz
LHABCYRDEFWTKGN1
N2
M
70004505506006155307001508809070044038015
φ150φ178
45
450
91100045067072073577095015088090
70044038015
φ150φ178
45
520
0.4
4
2.352.05
2.024
1617
16
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
0.35(21)0.42(25)
200V200V
220V
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
0.097(5.8)0.12(7.0)
3.7
6×37
5 6
※Dimensions E and Q vary with the rail width.
●Specification
A B
W
K1
K2
H
L
SU
N
Lower flange
E E
H
L
F
N
EA
S RM
B
K1
K2
φF
1t～3t1t～3t
●Specification
• Motor trolley hoistOrdinary type • Suspended hoistOrdinary type
1t 2t 3t
SMT-1AHNN-18
18
SMT-2AHNN-18
18
SMT-3AHNN-18
18
8 10
Standard I beam width (mm)
Min. Radius
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.10(6.0)0.12(7.2)
1.5
4
50Hz
60Hz
kW
Pole
50Hz60Hz
60Hz
LHABEFQWUNK1
K2
S
18000750495675335—50
500140φ1002309570
1800093055074033533050
500140φ10024010075
125 125
12.518000103059080033535050
500140φ10026010580
125
2×0.3
8
2×3.62×3.0
2×3.02
6×37
6.37.0
6.3
11.512
11.5
1617
16
RatedCurrent
(A)
TrolleyMotor
RatedCurrent
(A)
0.35(21)0.42(25)
200V200V
220V
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
240
7mR
340
7mR
440
7mR
0.098(5.9)0.12(7.1)
2.6
0.097(5.8)0.12(7.0)
3.7
1t 2t 3t
SH-1AHN-18
18
SH-2AHN-18
18
SH-3AHN-18
18
8 10
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.10(6.0)0.12(7.2)
1.5
4
50Hz
60Hz
kW
Pole
50Hz60Hz
60Hz
LHABEFMφNK1
K2
RS
1800070049567519532050032
166230953370
1800088055074019033050032
1662401003375
155 255
12.518000
98059080021535050032
1662601053380
355
2
6.37.0
6.3
11.512
11.5
1617
16
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
200V200V
220V
50Hz
60Hz
kW
Pole
200V200V
50Hz60Hz
FallsConstructionDia (mm)
0.098(5.9)0.12(7.1)
2.6
0.097(5.8)0.12(7.0)
3.7
6×37
S-TYPE INVERTER HOIST
1. Optimum speed can be selected.Hoisting up and down speed can be set freely in a range of full to 1/10 speed. An optimum speed may be selected for painting or planting line, and the product is finished uniformly.
2. Less shock on cargo.Starting and stopping smoothly, shock on the cargo is less. Ideal for assembling precision die or carrying precision machines.
3. Protective circuits are incorporated for safety assurance.Multiple protective circuits are built in, and various failures can be detected and remedied. The panel comprises a digital operator to display the trouble, and maintenance can be done quickly.
■Features■Standard SpecificationThree-phase 200V 50/60Hz, 220V 60Hz, 380V 50Hz
Pendant control unit for floor-operation
(two-step push-in method)
Power source
Control
30 minute ratingRating
Inverter driveControl method
Cable power feeding
Hoist-up inverter can be supplied from trolley (tandem collector)
However, momentary power failure of over 10 msec should
not occur
Power feeding method
From –5°C to +40°CService temperature
90%RH (not to condense dew)Humidity
Free from corrosive gas, low dust levelAtmosphere
Dustproof typeProtective structure
25%ED (JEM1393, Measuring methods
for temperature rise of electric hoists
at periodic duty rating)
Duty rating*
Munsell 5GY5.5/6.5
JIS C 9620 (Electric Hoists) and Japanese
Construction Codes for Crane
Pertinent standards
200 starts per hourNumber of starts
Paint color
● Low headroom type
● Double rail type
TrolleySpeed (m/s)
(m/min)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
7 8※Dimensions E and Q vary with the rail width.
●Specification
1t～3t1t～3t
●Specification
※Dimensions E and Q vary with the rail width.
●Specification
1～2.8t
●Specification
1t～3t3t
• Motor trolley hoistOrdinary type • Motor trolley hoistLow headroom type • Motor trolley hoistDouble rail type • Suspended hoistOrdinary type
A B
W
U
S
EF
Q
K1
K2
H
L
N
C
Q
A BE
TN
U
W
D C
H
L
T
M
L
H
KG
N1N2
D EW F
J
YR
AC
B 4-φ32
K1
K2
L
H
RB
MS
A F E1
N
1t 2t 3t
SMT-1AVN
6
SMT-1AHVN
12
SMT-2AVN
6
SMT-2AHVN
12
SMT-3AVN
6
SMT-3AHVN
12
8 10
Standard I beam width (mm)
Min. Radius
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.013-0.12(0.8-7.2)
1.5
4
kW
Pole
LHABEFCQWUNK1
K2
S
600075036039033537037050
180140φ100
60500
1200075046051033537037050
282140φ10012011010
600093039044033541039050
180140φ100
60500
1200093050057033541039050282140φ10013010015
125 125
12.56000103042047033543043050
180140φ100
70500
12000103053062033543043050
282140φ10015010020
125
0.3
8
3.63.0
3.02
6×37
7.0 12 17
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
0.35(21)0.42(25)
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
170
2mR
200
3mR
250
2mR
290
3mR
320
2mR
370
3mR
0.013-0.12(0.8-7.1)
2.6
0.013-0.12(0.8-7.0)
3.7
1t 2t 3t
SMT-1ALVN
7.8
SMT-1ALHVN
12
SMT-2ALVN
6
SMT-2ALHVN
9.8
SMT-3ALVN
7
SMT-3ALHVN
11
56×W (19)
8
Standard I beam width (mm)
Min. Radius
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.013-0.12(0.8-7.2)
0.013-0.12(0.8-7.1)
0.013-0.12(0.8-7.0)
1.5
4
kW
Pole
LHABEQWUNDCT
780045050047033550
180140φ10050040070
1200045061058033550
180140φ10050040070
600055056051033550
282140φ10054045080
980055067063033550
282140φ10054045080
125 125
9700065060055033550
282140φ100590430100
1100065072067033550282140φ100590430100
125
0.3
8
3.63.0
3.04
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
7.0 12 17
0.35(21)0.42(25)
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
210
2mR
240
2mR
320
3mR
370
3mR
400
3mR
480
3mR
2.6 3.7
6×37
1t 2t 3t
SH-1AV
6
SH-1AHV
12
SH-2AV
6
SH-2AHV
12
SH-3AV
6
SH-3AHV
12
8 10
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.013-0.12(0.8-7.2)
0.013-0.12(0.8-7.1)
0.013-0.12(0.8-7.0)
1.5
4
7.0 12 17
kW
Pole
LHABE1
FMφNK1
K2
RS
600070036039037037022032
1666050330
1200070046051037037028032
1661201103310
600088039044039041022032
1666050330
1200088050057039041028032
1661301003315
130 210
12.5600098042047043043022032
1667050330
12000980530620430430280321661501003320
280150 250 320
2
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
2.6 3.7
6×37
3t
SMT-3CDVN
7
SMT-3CDHVN
11
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
4
kW
Pole
LHABCYRDEFJWTKGN1
N2
M
70004505506006155307001908809019570044046015
φ150φ178
45
470
1100045067072073577095019088090
19570044046015
φ150φ178
45
540
0.4
4
2.352.05
2.024
17
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
0.35(21)0.42(25)
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
0.013-0.12(0.8-7.0)
0.013-0.12(0.8-7.0)
3.7 3.7
6×379
9 10※Dimensions E and Q vary with the rail width.
●Specification
1t～3t1t～3t
●Specification
• Motor trolley hoistOrdinary type KAMIUCHI HOIST SERIES APPLICABLE FOR ALL APPLICATIONKamiuchi prepare so many and abundant hoist series that each customer can select according to their application.Please make the best use of Kamiuchi hoists, being proud of the outstanding actual sales and reliability, for rationalization and energy saving of transportation works and improvement of operation efficiency.
R-TYPE HOIST series（500kg～30t）
Hoist of small andcompact size butbig capacity.
Hoist of high reliability and complying with various needs.
Low headroom type Inverter type
Creep speed
High lifting head typeDouble rail type
Ordinary type
K-TYPE HOIST series（500kg～60t）
Ordinary type
All chain driving type
High lifting head type Creep speed
Inverter type
• Installable anywhere if air feed piping is available.
• Weighing only 15.5kg.
• Handy tool at home, shop or factory.
• Small and light Home Hoist is portable, yet it lifts max. 200kg.
Home Hoist Air Hoist
• Motor trolley hoist
Double rail type• Motor trolley hoist
• Motor trolley hoist• Suspended hoist
• Motor trolley hoist• Suspended hoist
• Motor trolley hoist
Lower flange
W
K1
K2
A
U
B
S
H
L
F E1
E E4-φ32
A B
H
LK1
K2
MS
F E1
NRN Q
• Suspended hoistOrdinary type
1t 2t 3t
SMT-1AHVN-18
18
SMT-2AHVN-18
18
SMT-3AHVN-18
18
8 10
Standard I beam width (mm)
Min. Radius
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.013-0.12(0.8-7.2)
1.5
4
kW
Pole
LHABEE1
FQWUNK1
K2
S
1800075049567533537037050
500140φ1002309570
1800093055074033539041050500140φ10024010075
125 125
12.518000103059080033543043050
500140φ10026010580
125
2×0.3
8
2×3.62×3.0
2×3.02
6×37
7.0 12 17
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
0.35(21)0.42(25)
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
260
7mR
360
7mR
460
7mR
0.013-0.12(0.8-7.1)
2.6
0.013-0.12(0.8-7.0)
3.7
1t 2t 3t
SH-1AHV-18
18
SH-2AHV-18
18
SH-3AHV-18
18
8 10
Approx. weight (kg)
Approx. Dimensions
(mm)
Wire Rope
Rated Load
Model
Lifting Height (m)
0.013-0.12(0.8-7.2)
0.013-0.12(0.8-7.1)
0.013-0.12(0.8-7.0)
1.5
4
kW
Pole
LHABE1
FMφNK1
K2
RS
1800070049567537037050032
166230953370
1800088055074039041050032
1662401003375
175 275
12.518000
98059080043043050032
1662601053380
375
2
RatedCurrent
(A)
TrolleyMotor
TrolleySpeed (m/s)
(m/min)
RatedCurrent
(A)
Hoist Motor
Hoist Lifting Speed (m/s)
(m/min)
Hoist
Trolley
7.0 12 17
50Hz
60Hz
kW
Pole
200V200V
220V
50Hz60Hz
60HzFalls
ConstructionDia (mm)
2.6 3.7
6×37
0.050 - 0.083m/s(3 - 5m/min)
0 - 0.083m/s(0 - 5m/min)
200kg
Model
Rated Load
Hoist Lifting Speed
Control Voltage
Hoist Motor
Net Weight
Lifting Height
Chain
Control Pendant control unit for floor-operation
KL-1E
50/60Hz 100V
140W
Approx. 7kg
3m · 6m
Link chain (φ5)
Model
Rated Load
Air Pressure
Lifting Height
Hose Aperture
Hoist Lifting Speed(Rated load)
Air Consumption
Net Weight
58.8Pa (6kg/cm2)
3m
12.7mm
AH-1RN AH-2RN
500kg 1000kg
0.23m/s
(14m/min)
0.12m/s
(7m/min)
1.3m3/min
15.5kg 21.5kg
KLC-1E
