®

America’s favorite hot water baseboard radiation

Fine/Line 30 harmonizes with any decor!

The science of better heating!Our hot water boiler-baseboard perimeter systemsurrounds you and your family with heating com-fort. It is the most efficient, most comfortableheating system of all. Here’s why it’s better thanforced air, electric heat or heat pumps:

• Cleaner, healthier heat• Gentle, draft-free heating• Room by room comfort• Quieter• Better fuel economy• Quicker response• Slim profile• Rugged and durable

• BASEBOARD & COMMERCIAL FIN-TUBE •

®

BOILERS & BASEBOARD

Since 1949

Now available for Fine/Line 30

Colors to enhance any décor!

Leading the way in design and engineeringWhy Slant/Fin is preferred by heating experts—Slant/Fin leads the industry with baseboard heating innovations. Fingertip control dampers, hinged telescopic accessories,plastic expansion cradles and Zip-strip cartons are all Slant/Fin firsts. From die formed steel brackets to durable bakedenamel finish, the quality you see in Slant/Fin baseboard reflects our commitment to excellence.Experts agree that Slant/Fin leads the way in variety, quality and ease of installation.

1

6

5

3

4

2

1. High strength support brackets.Slant/Fin’s heavy gauge steelsupport bracket is shaped by aseries of progressive die strikes which multiply the strength of the metal alone. The bracket becomes a powerful “spine” for the entire unit, holding cover, element and damper vane securely in place. Brackets can’t pop out of place, yet may be slid laterally for installation conve-nience. Support wedge at top of bracket reinforces top panel against damage. Half-moon cutout provides room for return line.

2. Super-strong enclosure won’t go out of shape under rough abuse or even when used as a step by children. The super strong Slant/Fin enclosure holds its shape through installation and years of use. Prime, cold-rolled, rephospho-rized, heavy-gauge, galvanized steel is formed into rigid front panel and one-piece bottom, back and top panel. Channels formed along top and bottom edge of front panel add extra structural strength.

3. Rust resistant galvanized steel isstandard on all Fine/Line 30 base-board. The special alloys and rustinhibitor finish used in makingFine/Line 30 ensure that the enclo-sures will maintain their like-newbeauty, even in high moisture areassuch as bathrooms, basementsand laundry rooms. No other resi-dential baseboard offers this longlasting protection.

4. Room control damper helps con-trol individual room temperature.Slant/Fin’s unique pivot and dampermounting assembly provide thestraightest, most responsivedamper available. Factory assem-bled. Holds any setting from fullyopen to fully closed or any settingin-between. Ordinary baseboarddampers may leave large spaceseven when closed. The Slant/Findamper, when closed, effectivelyreduces convection air flow.

5. High performance heating ele-ment. Maximum heat output.Fins won’t loosen. Double bentaluminum fins pack extra heatingsurface in a slimmer enclosure.Interlocking tongue-and-groovecollars permanently bond fins toeach other and to the tubing. Stops“pings and clicks”. Tight bondassures maximum heat-transferefficiency. End fins are of platedsteel for extra ruggedness.

6. No-noise expansion cradles. Self-adjusting velvet smoothexpansion cradles eliminate noisymetal-to-metal contact with bracketand enclosure. Cradle slides silent-ly over support bracket as heatingelement expands and contracts.

Wall streakage eliminated. Top panel and damper form a shield to keep dust fromsettling into baseboard interior, and to deflect heated air away from the wall, into theroom. Back panel has no holes or slits to leak air behind the back of the baseboardcausing wall streakage.

Engineered for Excellence.

Decorator Colors for Premium Baseboard andCommercial Fin-Tube Radiation

Fine/Line 30 Series

Slant/Fin is America's best known manufacturer of baseboard heating equipment. Since 1949contractors and homeowners have come to know and trust Slant/Fin.

Our hot water baseboard perimeter system surrounds you and your family with heatingcomfort. It is the most efficient, most comfortable heating system of all! But what’s more, all ofour most popular Premium Baseboard and Commercial Fin-Tube Radiation models arenow available in decorator colors! Perfect for home renovations or new construction!

Slant/Fin Decorator Series baseboard, in appliance-like finishes, is an affordable optionto take decorating to new heights.

We have the colors that go in any décor!

Zip-Strip carton zips open in seconds.Baseboard comes out of the carton fullyassembled, ready to nail. No jigsaw puzzleof parts. No cutting to fit.

Slant/Fin's T-shot nailer reaches through thedamper opening to drive a nail high up on theback panel where it offers the most support. Youdon't even have to remove the front panel to nailup the baseboard. Or use power drill with self-tapping screws.

Heating contractor: Complete your baseboardinstallations with less effort and less time.Fine/Line 30 is designed for fast, simple, economical installation from the minute you zip open the first cartonto the second you snap on the last accessory. You make the best looking, most cost-effective baseboardinstallation possible. Without cutting corners.Without unexpected labor costs. Take advantage of these Slant/Fin featuresfor a better installation.

Slant/Fin's selection of pre-cut lengths andtelescopic accessories lets you fit "standard"Slant/Fin products to virtually any field condi-tion, for easy, neat wall to wall fit without cut-ting. With the 31⁄2' baseboard length, you canfigure your runs in half-foot increments. Noone offers greater selection, versatility andquality for baseboard accessories thanSlant/Fin. Telescoping accessories make upthe odd inches. 7" and 14" filler sleeves alsofill gaps up to a foot.

Drawn steel end caps (shown) and wall trim have elegantrounded edges (instead of welded seams) to give your instal-lation a more distinctive look. Wall trim conceals top, frontand side for a more finished look than ordinary wall trim thathas no side contour. Has the same appearance as a hingedend cap, except the side is slotted for passage of the tubing.

Quality enamel finish perfectly matches thebaseboard color to give a harmonious look toyour finished job. Every accessory has thick,even paint coverage. No streaks. No splotches.Even the inside is thoroughly protected withpaint for years of rust-free beauty. Full backpanel on end caps, wall trim etc.

Snap-on, hinged accessoriesswing up for easy access to air vents andheating element or for removal of the frontpanel— even when wall material covers theaccessory top. Precision piano hinges lastfor years.

Slant/Fin baseboard can be installedflush to the wall or recessed for a moreconcealed look.

Turn corners easily. It’s easy to shape your owninside corner when the standard 90˚ or 135˚ cornerswon’t fit. Our field adaptable inside corner is easilyshaped on the job for a perfect fit at bay windows orany other place with unusually angled corners.

2" splice plateincluded free with lengths 5’ and longer,provides continuity between close fittingbaseboard sections.

Riser hole template, included free in everybaseboard package, lets you quickly mark thecorrect location for floor riser holes or wallholes for straight-through runs. Recommendedhole diameter allows room for lateralexpansion movement of the riser.

Flared element tube —facilitates joining of baseboardsections. Right end of eachelement tube is flared to accepttubing from adjacent baseboardor 3⁄4" system tubing.

Vented return bend. Special 180˚bend aligns return line perfectly withhalf-moon cutouts in supportbrackets. A 1⁄8" threaded tappingpermits easy installation of air vent,can also serve as a drain

Wire hangers — provide support for bare tube indummy enclosures or for return tubing aboveheating element.

Riser rings — provide a neat, clean,sanitary seal where risers come up throughfloor. Wax loaded neoprene acts to cushionexpansion squeaks and vibration noises.Split collar allows easy installlation at anytime, even after connections are made.

Fast/Flex connectors can be hand formed aroundobstructions, go through tight spots and make up forany misalignment between baseboard and piping.Here, one Fast/Flex replaces three elbows and threelengths of tubing, eliminating much measuring andfitting. (See Pub. No. EC-FF-10 for additional data.)

41⁄2

113⁄16

33⁄16

117⁄32

11⁄2

1

77⁄8

7⁄8

13⁄8

211⁄16

Length, ft. 2 - 31⁄2 4 - 5 6 - 8 10 12 - 14

Brackets 2 3 4 6 8

ORDERING DATA

No. 30-75 COMPLETE BASEBOARDPACKAGEContains heating element andenclosure. Following items included:expansion cradles, support brackets,damper vane, 2" wide splice platewith 5' lengths and longer.LENGTHS: 2', 3', 31/2', 4', 5', 6', 7', 8',10', 12'

No. 30-DW ENCLOSURE ONLYPACKAGE(All parts and lengths asNo. 30-75 WITHOUT heating elementor expansion cradles.)

N0. E-75 3/4" ELEMENT ONLYPACKAGEHeating element with expansioncradles; NO enclosure.LENGTHS: 2', 3', 31/2', 4', 5', 6', 7', 8'

PACKAGINGEach baseboard or enclosure only unitis individually packed—completelyassembled—in its own Zip-strip carton,with end flaps clearly marked andcolor-coded. See R-01 price list forpackaging of accessories.

HEATING ELEMENT SPECIFICATIONS:Furnish and install E-75 baseboardheating element as manufactured by Slant/FinCorporation, consisting of 3⁄4" nominal coppertubing, with 25⁄8" x 21⁄8" x .009" aluminum fins,bent to 25⁄16" x 21⁄8", spaced 55 per linear foot. Aflange with four teeth shall be formed on eachfin to increase thermal contact and to space andlock the fins uniformly in place. One end of eachelement tube shall be expanded to receive theunexpanded end of another, without couplings.

© Slant/Fin Corp. 2015 • Printed in U.S.A. 415 • Publication No. 30-10

WATER PRESSURE140˚F 150˚F 160˚F 170˚F 180˚F 190˚F 200˚F 210˚F 215˚F 220˚FFLOW DROP†

1 GPM 47 320* 380 450 510 580 640 710 770 810 8404 GPM 525 340* 400 480 540 610 680 750 810 860 890

HOT WATER RATINGSFine/Line 30 – No. 30-75 baseboard with 3/4" E-75 element.

BTU/hr./ft. with 65˚ entering air † Millinches per foot. NOTE: Ratings are for element installed as per drawing shown here, with damper open, with expansion cradles. Ratings are basedon active finned length (5" to 6" less than overall length) and include 15% heating effect factor. Use 4 gpm ratings only when flowis known to be equal to or greater than 4 gpm; otherwise 1 gpm ratings must be used.

SLANT/FIN CORPORATION, Greenvale, N.Y. 11548 • Phone: (516) 484-2600FAX: (516) 484-5921 • Canada: Slant/Fin LTD/LTEE, Mississauga, Ontario

www.slantfin.com

BRACKETS PER LENGTHComplete assembly and enclosure only

COVER ASSEMBLY SPECIFICATIONS: Furnish and install Fine/Line 30-75baseboard cover assembly as manufactured by Slant/Fin Corp. The cover consists of a one-piecebottom, back and top panel, one-piece front panel and one piece damper vane that are formedout of galvanized cold rolled steel. Cold rolled steel that is not galvanized is not acceptable. Thegalvanized steel makes the cover rust resistant. Bottom and top of back panel shall have channelsalong entire length to receive full-height support brackets. Brackets shall add support to the top ofthe rear panel. The factory installed damper vane shall modulate fully and freely, while retainingany setting through its arc. Damper shall swing in position on damperpivots inserted in die-formed slots towards top of support bracket. Roll formed pivot point is notacceptable. All cover components shall be painted in a Nu-White, thermosetting polyester enamel.

Brackets shall be die-formed of re-phosphorized cold rolled steel, for rigid bracing and springlocking. Each length of baseboard shall have a minimum quantity of factory installed brackets perlength of baseboard cover as follows: 2, 3 and 31⁄2' have 2 brackets; 4 and 5' have 3 brackets; 6, 7and 8' have 4 brackets; 10' has 6 brackets; 12 and 14' have 8 brackets. Fewer brackets are notacceptable.

Slide-action polypropylene expansion cradles shall protect element bottom and sides from con-tact with support brackets and cover, allowing free lateral element expansion for noiseless opera-tion. Cradles shall be installed on heating elements at location of brackets.

END CAP Left end cap33⁄4"

’wide, No. 30-LEC

with piano-hinged Right end capfront panel, closed No. 30-RECend. For use atdoorways.

SLOTTED END CAP Left wall trim33⁄4" wide, No. 30-LEC-SLOTwith piano-hinged Right wall trimfront panel, slotted No. 30-REC-SLOTend. For use at wallpartitions.

INSIDE CORNER 90˚ inside corner33⁄4" wide No. 30-IC-90at top, with piano- 135˚ inside cornerhinged, contoured No. 30-IC-135front panel. 91˚to 179˚field

adaptable insidecorner No. IC-FA

VALVE COVER Left valve cover8" wide, No. 30-LVCwith extra wide Right valve coverpiano-hinged front No. 30-RVCpanel, closed end. Center valve cover(30-CVC has open No. 30-CVCends.)

ZONE VALVE BOX Left zone91⁄2" wide, valve box9" high, No. 30-LZC31⁄2"deep, with Right zonepiano-hinged front valve boxpanel. Houses most No. 30-RZCmotorized valves. (Slotted shown)

FILLER SLEEVECover gaps from 7" filler sleeve1" to 6" or No. 30-FS-71" to 12"Includes back, 14" filler sleevetop and front panels No. 30-FS-14and damper vane.

SPLICE Splice plate setPLATE SET No. 30-SP2" wide. Freewith lengths 5'and longer.

OUTSIDE 90˚outside cornerCORNER No. 30-OC-90One-piece unit without 135˚ outside cornerhinged panels. No. 30-OC-135

SOLID WALL TRIM 2" solid2" or 4" wall trimsolid (non-hinged), No. 30-WT-2with open ends. For 4" soliduse at left or right wall wall trimpartitions or as one- No. 30-WT-4piece filler sleeve.

Touch-Up Paint4.5 oz touch up paint- spray can

Fine/Line 30 Hinged Accessories