Upload
iam-abhisek
View
216
Download
0
Embed Size (px)
Citation preview
8/22/2019 stc_2013_14
1/2
CIPETANNUAL CALENDAR
forSHORT TERM COURSES
2013 2014
CIPET PROFILE
Central Institute of Plastics Engineering & Technology
(CIPET) is a premier National Institution devoted to
Academic, Technology Support & Research (ATR) for the
Plastics & Allied industries in India. First CIPET campus
was established by Government of India in 1968 at
Chennai and subsequently 14 CIPET Campuses have been
established by Government of India in the country.
Today 15 CIPET Institutes Ahmedabad, Amritsar,
Aurangabad, Bhopal, Bhubaneswar, Chennai, Guwahati,
Hyderabad, Hajiput, Haldia, Jaipur, Imphal, Lucknow,
Mysore and Panipat are contributing through ATR
services to the industries in India and abroad.
All the centres have adequate infrastructural facilities in
the areas of Design, CAD/CAM/CAE, Tooling & Mould
Manufacturing, Plastics Processing, Testing and Quality
Control.
The courses are designed to produce technically trained
manpower for ready absorption in plastics industry. The
infrastructure facilities in terms of machinery and
equipment are continuously upgraded / modernized to
match with the technological development and needs of
the industry globally.
To keep the industries abreast with the new
technological developments and update the skill levels
of the personnel working in the industry, short-term
programmes, tailor-made programmes, modular training
programmes, technical seminars are conducted on
Design, Tooling, Plastics Processing, Plastics Testing and
Quality Assurance.
4 PLASTICS MATERIALS AND COMPOUNDING
(Code: T-2)
Period/Duration:12.12.2013 & 13.12.2013 / Two Days
Course Fee: Rs.4,000/- Target: 20
Course Co-ordinator: Dr. S SOUNDARARAJAN
Mobile No: : 98840 51606
Contents:
Thermoplastics Materials - Commodity Plastics,
Engineering Plastics, Speciality Plastics Thermoset
Plastics Introduction to Compounding need for
compounding plastics various additives and their
functions Antioxidants, Uv stabilizers, lubricants,
plasticizers, toughening agents, etc.
5. TESTING AND QUALITY CONTROL OF
PLASTIC MATERIALS & PRODUCTS (code :T-3)
Period/Duration: 24.10.2013 & 25.10.2013 / Two Days
Course Fee: Rs.4,000/- Target : 20
Course Co-ordinator: Mr. D. BASKAR AN
Mobile No: 98409 25720
Contents:
Introduction to Plastics Materials - various standards
and specifications Testing for mechanical, thermal,
Electrical and permanence properties Plastic product
testing Practical on Testing of Plastics Materials and
Products.
6. IDENTIFICATION OF PLASTICS MATERIALS
AND SELECTION CRITERIA FOR END USE
APPLICATIONS (Code: T-4)
Period/Duration: 28.11.2013 & 29.11.2013 / Two Days
Course Fee : Rs.4,000/- Target : 20
Course Co-ordinator: Mr. N MOHAN KUMAR
Mobile No: 9677123891
Contents:
Introduction to Plastics Materials, Identification of
Plastics by simple methods Application of instrumental
methods for identification of plastics chemical
methods for identification and confirmation of plastics
Plastics selection criteria for end use applications.
7. POLYMER ALLOYS & BLENDS AND
COMPOSITES (Code: T-5)Period/Duration: 25.07.2013 to 26.07.2013 / Two Days
Course Fee: Rs. 4,000/- Target: 20
Course Co-ordinator: Dr. M.ABDUL KADER
Mobile No 9677123883
Contents:
Polymer Alloys & Blends -Composite structure
properties and applications o
PC/ABS,PVC/ABS,PET/PBT, Nylon/PE,PP/EPDM, etc
Fibre Reinforcements & Coupling agents for Composites
Properties & advantages of Composites.-Applications
Compounding, Testing & Characterization of Composite
Commercial Trade names of alloys &blends an
Composites.
8. WOTKSHOP ON EFFECT OF ENVIRONMENTS
ON PLASTIC MATERIALS AND PRODUCTS
(Code: T-6)Period/Duration: 19.12.2013 & 20.12.2013 / Two Days
Course Fee: Rs. 6,000/- Target: 20
Course Co-ordinator: Dr. K P BHUVANA
Mobile No. 9894398623
Contents:
Effect of Weathering Natural & Accelerated Effect o
heat & cold cycle, Heat shock and Humidity Corrosio
resistance (effect of salt spray) Chemical resistance
Effect of Sterlization Environmental stress Crac
resistance (ESCR) Bio-degradability Phot
Degradability
DESIGN
8. INJECTION MOULD TECHNIQUES (Code:D-1)
Period/Duration: 25.07.2013 & 26.07.2013 / Two Days
Course Fee: Rs.4,000/- Target :20
Course Co - ordinator: Mr. S.LAKSHMANAN
Mobile No: 93801 20757
Contents:
Plastics Conversion Process Plastics Materials Moul
Making Technology Injection Moulding Design (Fee
System Cooling System Ejection and Clampin
System).
PROCESSING
1. INJECTION MOULDING PROCESS (Code:P-1)
Period/Duration: 26.06.2013 to 28.06.2013 / Three Days
Course Fee: Rs.6,000/- Target: 25
Course Co-ordinator : Mr. P. VIJAYAKUMAR
Mobile No: 9677123887
Contents:
Processing overview - Plastics Materials & its
Application - Injection Moulding Process - Advanced
Injection Moulding - Effect of Polymer Property on
Process Techniques - Process variables & its effects,Trouble Shooting - Mould and Product Design -
Processing Practical on Injection Moulding.
2. INJECTION MOULDING & BLOW MOLDING
PROCESS (Code : P-2)
Period/Duration: 12.02.2014 to 14.02.2014 / Three Days
Course Fee : Rs.6,000/- Target : 25
Course Co-ordinator : Mr. R T. NAGARALLI
Mobile No: 96771 23882
Contents:
Processing Overview Plastic Materials & its application
Injection Moulding Process - Advanced Injection
Moulding - Blow Moulding Process Types - Effect of
Polymer Property on Process Techniques - Process
variables & its effects in Injection Molding & Blow
Moulding - Trouble Shooting - Mould & Product Design -
Processing Practical on Injection Moulding & Blow
Molding.
TESTING
3. BIOPLASTICS AND BIODEGRADABLE
POLYMERS (Code:T-1)
Period/Duration: 21.11.2013 & 22.11.2013- Two Days
Course Fee: Rs.4,000/- Target : 25
Course Co-ordinator: Dr. SYED AMANULLA
Mobile No: 96771 23885
Introduction to bioplastics Biopolymers from
renewable Resources - synthesis and characterization
of biopolymers Compostable plastics Testing for
biodegradability of plastics as per ASTM, ISO and Indian
standards.
COURSE CODE - - TR-1 P1 T-5 D-1 D-2 D-3 T-3 T-1 T-4 T-2 T-6 P2
MONTH &
YEAR
APRIL, 2013 MAY, 2013 JUNE, 2013 JULY , 2013 AUG., 2013 SEPT., 2013 OCT., 2013 NOV., 2013 DEC., 2013 JAN ., 2014 FEB., 2014 MARCH,2014
8/22/2019 stc_2013_14
2/2
9. PRODUCT & MOULD DESIGN FOR
ENGINEERING PLASTICS IN AUTOMOBILE
APPLICATIONS (Code:D-2)
Period/Duration: 29. 08.2013 & 30.08.2013Two Days
Course Fee: Rs.8000/- Target : 20
Course Co-ordinator: Mr. A G S NEELGANNDAN
Mobile No: 9360098600
Contents:
Standard parts and its advantages ;Fundamentals of
Plastics Product Design; Developing a Functional
Injection Mould; Advanced Injection Mould Design / Hot
Runner / Unscrewing/ Collapsible core system;
Fundamentals of Engineering Plastics Material and its
Selection; Manufacturing and processing considerationson engineering Plastics; Rapid Prototyping / Stress
analysis and CAD/CAM/CAE, Mould Flow in Advanced
Design Concepts; Before assembly and after assembly
methods such as Insert, Over moulding, Gears, Plastics
threading, Mechanical fastening, welding, bonding and
Ultrasonic assembling process, press and snap fits,
painting etc.
Standardization/Design patenting and registration
10. Modern Concepts in Plastic Product Design
(Code:D-3)
Period/Duration: 26.09.2013 & 27.09.2013 / Two Days
Course Fee : Rs.4,000/- Target : 20
Course Co-ordinator: Ms. S BARATHI
Phone No: 044-22254701-06(6 Lines) extn: 580
Contents:
Product design principles Role of CAD/CAM in product
design product design features conceptual product
design process analysis of product design methodical
approach in plastics product design-defects in molding
CAE &shared design information
TOOL ROOM
11. MODERN MOULD MANUFACTURING
TECHNIQUES (Code: TR1)
Period/Duration: 05.06.2013 & 06.06.2013 / Two Days
Course Fee: Rs.4,000/- Target : 20
Course Co-ordinator: Mr. C H SHEKER
Mobile No:9677123890
Contents :
Mould Material and heat treatment Technology
Development in CNC Machine Tools, Cutting Tools and
CAD / CAM / CAE.
For whom / beneficiary
All the above courses are for Supervisors / Managers /
Proprietors from Plastics & Allied Industries.
6. PROGRAMMING & MACHINING CASE STUDI
ON CNC MILLING
Duration: 40 Hrs. Fee:Rs.6,000/-
7. PROGRAMMING & MACHINING CASE
STUDIES ON CNC LATHE
Duration: 40 Hrs. Fee:Rs.6,000/-
8. FAMILIARIZATION AND OPERATION PRACTICE
ON CMM
Duration: 40 Hrs. Fee: Rs.6,000/-
Eligibility : ITI/Diploma/B.E
Course Commencement :
First & Third week of every month
Special discount (10%) for group of candidates mor
than 10 in a batch
Course Co - ordinator: Mr. C. H. SHEKER
Mobile No: 96771 23890
TAILOR MADE COURSES
CIPET, Chennai can also conduct Tailor Ma
Courses exclusively for the participants from a
company either at companys premises or at CIPE
Chennai.
The contents of the course can be framed by t
customer or by CIPET as per company
requirements.
The duration of the course can be 2 to 5 days .
The course fee is Rs. 3000/- per person per day.
Minimum no. of participants is 20.
Course Co-ordinator: Mr. N.DURAI
Mobile No: 9677123895
FOR DETAILS CONTACT :
THE DEPUTY DIRECTOR,
CENTRAL INSTITUTE OF PLASTICS
ENGINEERING & TECHNOLOGY (CIPET)
GUINDY,CHENNAI 600 032.Tel No. : +91-44-22254701-6 lines
Fax : + 91-44-22254707
Email: [email protected]
Website: www.cipet.gov.in
Mobile Nos.: 9677123881 / 9677123895
CAD/CAM/CAE COURSES
1. Integrated Engineering Software Programme on
Automobile & Aerospace Product Development
with CAD/CAM/CAE
(IES-PAAP-CAD) (7 Softwares + Project)
Fee : Rs.1,00,000/- Duration : 6 months
Monthly Stipend : Rs.5,000/-
2 Advanced Masters programme in CAD/CAM/CAE
(any 4 Softwares + Project)
Fee : Rs.90,000/- Duration : 4 months
Monthly Stipend : Rs.5,000/-
3 Masters Programme in Product Development
with CAD/CAM/CAE(any 4 softwares + Project)Fee : Rs.75,000/- Duration : 4 months
4 Mechanical CAD with CAM Programming and
CAE Analysis (any 2 CAD/CAM
Softwares and one Analysis software + Project)
Fee: Rs.50,000/- Duration: 3 months
5. CAD using Pro-Engineer (or) Unigraphics (or) CATIA
Fee: Rs.10,000/- Duration : 100 hrs.
6. CAD/CAM Pro-Engineer (or) Unigraphics (or) CATIA
Fee: Rs.18,000/- Duration : 200 hrs.
7. CAE using ANSYS (or) HYPERWORKS
Fee: Rs.15,000/- Duration : 160 hrs.
8. CAE using MOLDFLOW
Fee: Rs.15,000/- Duration : 120 hrs.9. CAE using LS-Dyna
Fee : Rs.15,000/- Duration : 100 hrs.
10. Unig raphics Mold Wizard
Fee: Rs 10,000/- Duration: 80 hrs
11. CAD using Unigraphics with Mold Wizard
Fee: Rs 15,000/- Duration: 160 hrs
12. CAD/CAM using Unigraphics with Mold Wizard
Fee: Rs 24,000/- Duration: 260 hrs
13. Pro/Mold
Fee: Rs 10,000/- Duration: 80 hrs
14. CAD USING PRO/E WITH PRO/MOLD
Fee: Rs 15,000/- Duration: 160 hrs
15. CAD/CAM using Pro-Engineer with Pro/Mold
Fee: Rs 24,000/- Duration: 260 hrs
16. CAD/CAM using CATIA with Reverse Engineering
Fee: Rs 24000 /- Duration: 260 hrs
Eligibility : SL. No.1 & 2 Engineering Degree (Minimum)
or equivalent in Mechanical stream
Sl.No. 3 to 16 Diploma (Minimum) or equivalent
Fee concession available for
Sl.No. 5 to 16 - Conditions apply
Course Co-ordinator : MR. P. ESWARAN,
Mobile No. 9677123886
DESIGN COURSES
1 . PRODUCT AND MOULD DESIGN FOR INJECTION
MOULDED PLASTICS COMPONENTS USING
UNIGRAPHICS
Duration: 3 Months Target : 20
Batch A - 9.00 a.m to 1.00 p.m
Batch B 1.30 pm to 05.30 p.m
Date of Commencement :
06.05.2013, 01.08..2013, 04.11.2013, 20.01.2014
Fee: Rs.25,000/-
Pre - requisite: Knowledge in Unigraphics
Course Co-ordinator :Mr. A G S NEELAGAANTAN, Mobile No: 9360098600
2. AUTOCAD WITH MOULD DESIGN PRACTICE
FULL/ PART TIMEDuration: 120 Hrs (effective) Target: 20
Fee:Rs.4,000/-
Pre -requisite: Knowledge in Engineering Drawing.
Date of Commencement :
15.04.2013, 03.06.2013, , 19.08.2013, 17.02.2014
Course Co - ordinator :
Mr. S.LAKSHMANAN, Mobile No: 93801 20757
Eligibility:
Design Engineers, Mould & Tool Designers / Tool Makers
/Production Supervisors and also Candidates with Degree /
Diploma in Mech./Prodn./Chem./Tool Engg. / ITI aspiring to
become Design / Tool / CAD Engineers. Final year students
can also join.
CAM & CNC COURSES (Full Time/Part Time)
1. PROGRAMMING & MACHINING CASE STUDIES ON
CNC EDM,CNC WIRE CUT, CNC MILLING & CNC
LATHE
Duration: 160 Hrs Fee:Rs.22,000/-
2. PROGRAMMING USING CAD & MACHINING CASE
STUDIES ON CNC EDM & CNC WIRE CUTDuration: 100 Hrs. Fee:Rs.15,000/-
3. PROGRAMMING & MACHINING CASE STUDIES
ON CNC MILLING & LATHE
Duration: 64 Hrs. Fee:Rs.10,000/-
4. PROGRAMMING USING CAD & MACHINING CASE
STUDIES ON CNC WIRE CUT
Duration: 40 Hrs. Fee:Rs.10,000/-
5. PROGRAMMING & MACHINING CASE STUDIES ON
CNC EDM
Duration: 40 Hrs. Fee:Rs.6,000/-
NOTE :
COURSE FEE INCLUDES SERVICE TAX
mailto:[email protected]://www.cipet.gov.in/http://www.cipet.gov.in/mailto:[email protected]