tacprogearcatlowresaug2013

8/12/2019 tacprogearcatlowresaug2013

1/25

BAGS & PACKS

www.tacprogear.com2

TACPROGEAR

PERFORMANCE ABOVE ALL ELSE


2/25

BAGS & PACKS BAGS & PACKS

www.tacprogear.com2 2


Our Products

Tacprogear is a leading manufacturer of tactical, military, law enforcement and outdoors equipment.

This includes rugged nylon pockets and pouches, body armor, apparel, footwear, bags and packs,

and more. Tacprogear products were created to meet the most rigorous demands of operators

around the world. Since 2005, our products have deployed with Private Security Contractors, Law

Enforcement, and Military professionals who demand performance above all else. Visit our website

or call us for the location of a distributor or dealer near you.

Ordering Information

Online: www.tacprogear.com

Call: Customer Service (561) 865-7279

Fax: (561) 265-4061

Email: [email protected]

If you are interested in becoming a dealer for Tacprogear please

email [email protected] for an application.

755 NW 17th Ave Suite 106

Delray Beach, Florida 33445 USA

TACPROGEAR

Our Customers

Our customers demand the very best and expect us to deliver

the highest quality of products and services. We believe the

customer is always right and we strive to provide the best possible

solutions every single day.

Tacprogear products can be found online and in retail locations

around the world. For the location of a dealer near you, please check

our website.

Our Pledge

Tacprogear products are made with the highest quality materials

available. Our attention to detail means every product is free

from manufacturers defects, or we will replace it at no charge to you.

www.tacprogear.com


3/25

BAGS & PACKS

www.tacprogear.com4

BAGS & PACKS

SPEC-OPS ASSAULT PACK 1B-SAP1

The entire Spec-Ops Assault pack line features our unique MOLLE Spine for

hanging additional items on the outside of your pack, making this a versatile

3-day or climbing pack.

1000D Cordura Nylon

YKK Zippers

ITW Nexus accessories Large main compartment

Four external side compression straps

Two zipper pulls on the main compartment for easy

access to the inside of the pack

Compartment for carrying a hydration bladder and an

opening on the top of the bag for the hydration tube

Two external accessory pockets

Smaller secondary compartment on front face


Larger than the SAP1, our mid size pack features two

main storage compartments as well as two external pockets

designed to provide ready access to items needed quickly.

Designed to carry a heavier load, the SAP2 features a

fully adjustable padded waist strap, side cinch straps, and

an internal hydration compartment. The shoulder straps

were redesigned with an improved roll over air mesh forenhanced moisture wicking.

mollespine

cellphonepocket

cinchstraps

reinforcedcarrystrap

removablecarrypad

rolloverair meshshoulderpads

removablepaddedwaiststrap

coveredopeningforhydrationtube

Dimensions:

Main Compartment: 8D x 14W x 19H

Accessory Pockets: 4D x 5W x 12H

Available in: BK-Black CT-Coyote Tan

OD-OD Green MC-Multicam

5

Dimensions:

Main Compartment: 9D x 14W x 20H

Secondary Compartment: 3D x 12W x 18H



4/25

BAGS & PACKS

www.tacprogear.com

BAGS & PACKS


Our largest pack in the SAP line, the SAP 3 has massive capacity in

the main compartment with internal load cinch straps. The secondary

compartment is located between the main compartment and two

front pockets, and includes a special ventilated mesh storage pocket.

The two front pockets were designed to provide ready access to

items needed quickly. Two side storage pockets with MOLLE webbing

allow mounting of MOLLE compatible pouches.



Dimensions:Main Compartment: 6D x 16W x 22H

Secondary Compartment: 3D x 13W x 20H


Side Pockets: 2D x 4W x 13H

side view

CORE PACKB-CORE1

Made with a unique high-strength, lightweight

fabric, and revolutionary S-Frame contour

shape. Crossover design techniques from the

outdoor industry combine the best of both

worlds in one unique pack. Fully adjustable

off-shoulder straps, our ventilated Cool Flow

back panel, and roll-over air mesh on the

shoulder straps offer features never seen in the

tactical world. The CORE pack offers the same

functionality as our SAP1, in a lighter design.

Dimensions:

Primary Space: 19D x 12.5W x 19HExternal Pockets: 2D x 5W x 12H

uniqueoff-bodysuspension

adjustableshoulderstraps

lightweightfabric

6 7

adjustableshoulderstraps

torsoheightadjustment

hydrationcompatible

removablecarrypad

400D weight with 1000D strength

YKK Zippers

ITW Nexus accessories


5/25



FREQUENT AIR TRAVELER PACKB-FAT1

This unique open top, ruck style pack was designed

with the tactical traveler in mind. The FAT Pack

features a padded laptop compartment with side

access allowing the user to quickly remove a laptop

during security screening.

Two side pockets provide extra storage for travel

documents, cell phones, iPods, and other devices.

Dimensions:

Primary Space: 19D x 14W x 8H

External Pockets: 12D x 5W x 4H

STASH PACKB-STSH1

The STASH Pack was originally designed

for tier one operators to collect evidence

during raids on high value target locationsin the Middle East.

Rapidly deployed from a packed position,

the STASH Pack opens into a mid-size

open top ruck style pack.

Dimensions:

Primary Space: 8D x 14W x 19H

External Pockets: 4D x 5 W x 12H

sideopeningfor quicklaptopaccess

easyaccess

cinchopening

FOLDS

TO 6 X 6

back

Trim Available in:

Black/Gray

Black/Coyote TanBlack/Red

Black/Blue



400D weight with 1000D strength

YKK Zippers

ITW Nexus accessories 1000D Cordura Nylon

YKK Zippers



6/25


COVERT GO BAGB-CGB1

The Tacprogear Covert Go Bag is a

single shoulder strap pack that offers

all the functionality of a day pack with

some very unique features.

Dimensions: 13D x 19W x 5H

COVERT GO BAG LITEB-CGB2

The Tacprogear Covert Go Bag Lite

was designed for a quick hike or trek

through town.

Dimensions: 6D x 12.25W x 17.5 H



PISTOL

WHEEL

also available

without external MOLLE

in new lightweight fabric

11

Dual access to Tacprogears universal pistol wheel

Removable accessory pad, which can be used to attach MOLLE compatible pouches

External MOLLE webbing [available with or without webbing]

Conceal carry platform that securely holds a handgun with hook and loop closure

Holds a standard 10 x 12 ballistic plate in the main compartment for added protection

3-D mesh back for comfort

Single ambidextrous padded sling with swivel buckles for easy removal

External MOLLE webbing for attaching additional pouches

Dual-entry zippered pockets for Tacprogears universal pistol wheel

Reinforced drag/carry handle

Internal plate pocket that holds a standard 10 x 12 ballistic plate

Additional internal zippered storage compartment

B-CGBW1

B-CGBW2

www.tacprogear.com10

1000D Cordura Nylon

YKK Zippers



7/25

BAGS & PACKS


OPERATOR TRAVEL BAGB-OTB1

Designed as an alternative to a fanny-pack, the OTB

offers a functional yet discreet way to carry a pistol

while traveling.

The main compartment is large enough to carry a wallet,

passports, iPods, documents and other personal effects

you want to keep close when on the road.

The two side compartments allow quick access to cell phones or spare magazines.Features a padded carry strap and front zipper pocket for boarding cards or creds.

Pistol wheel included.


Designed with our signature pistol wheel, the

side zipper allows users to quickly access a

pistol from a hidden compartment.

A reinforced, padded laptop bag is

removable which allows the user to

quickly withdraw a laptop when

processing through security

check points.

Additional pockets and storage

make this one of our most

versatile travel bags.

Pistol wheel included.

PRO TRAVEL BAGB-PTRV1

PISTOL

WHEEL

BAGS & PACKSH2O TO GOB-HOG2

The Tacprogear H2O TO GO

Hydration System is essential

when working in the eld.

Dimensions:

1.5D x 9.5W x 18.5H

13

100 oz. (3.0 L) bladder with Microbanantimicrobial technology

Hydration tube that can be accessed through the right or left side

External removable cap for easy lling, cleaning & ice addition

Front panel includes the unique Tacprogear MOLLE Spine

Back panel and shoulder straps built with padded 3D air mesh for added comfort

Back panel also works as insulation to keep your drink cool


The Pro Travel Bag provides users with an alternative to the conventional

laptop or messenger bag.

mollespine

1000D Cordura Nylon

YKK Zippers


A A


8/25

BAGS & PACKS

www.tacprogear.com 15

Durable wheels and an ambidextrous retractable handle

Handle stored in a zippered compartment Three mesh-lined pockets on interior for quick access storage

Two internal compression straps to secure your gear

Reinforced edges and bottom sliders

Tacprogear signature MOLLE Spine on the front

Reinforced carry handles on all sides

Transparent ID panel with hook and loop closure on the back

Three mesh-lined pockets on interior for quick access storage

Dual zippered mesh panel to secure your gear Rugged edges and sliders for stability and durability

Tacprogear signature MOLLE Spine on the front

Reinforced carry handle on the top

Two padded carry straps

Loop with quick release buckles to help carry any additional items

Transparent ID panel with hook and loop closure

Two cinch straps on either side of the bag


durable

wheels


14

Dimensions: 8.5D x 13.5W x 21H

TACTICAL ROLLING

LUGGAGE BAGCARRY ON

B-TRLB1

TACTICAL ROLLING

LUGGAGE BAGFULL SIZE

B-TRLB2

1000D Cordura Nylon

YKK Zippers




9/25


www.tacprogear.com

PERSONAL DEFENSE WEAPON CASEB-PDWC1

Whether you are going to the range, on a mission, or hunting, the TacprogearPersonal Defense Weapon Case is an ideal carry case for any shooter.

TACTICAL RIFLE CASEAvailable in: 32 - B-TRC1

35 - B-TRC2

40 - B-TRC3



16 17

Tacprogear MOLLE Spine Externa l zippered entry pocket Adjustable hook and loop retention straps to secure your weapon 0.5 foam padded edges for shock absorption

Thre e external magazine pouches Reinforced carry handle Durable shoulder strap

SNIPER DRAG BAG

B-SDB1

The Tacprogear Sniper Drag Bag isdesigned for the elite operator.

Reinforced drag handle Quick release cinch straps for weapon retention Internal pocket with a protective ap designed to hold 10 rounds of ammo 11W X 8H map pocket MOLLE webbing for additional pouches

Unfolds into a full shooters mat conguration Webbing loops for ghillie attachments Two detachable padded shoulder straps Padded carry handle

The Tacprogear Tactical Rie Case is a great solution fo rtransporting sporting ries or carbines of all shapes and sizes.

Dimensions:

2D x 12W x 35H

Dimensions:

Length: 50.5

Width (Open): 32

Width (Closed): 11

1000D Cordura Nylon

YKK Zippers ITW Nexus accessories

BAGS & PACKS

BAGS & PACKS


10/25

BAGS & PACKS


BAGS & PACKSRAPID LOAD-OUT BAG

Both of the Tacprogear Rapid Load-Out Bags were designed to be

an operator-friendly gear/travel bag. These bags carry all of your

essential equipment no matter what the mission is.



B-RLO1

Dimensions:

Main Space: 11D x 20W x 11H


B-RLO2

Dimensions:Main Space 13D x 27W x 13H


B-RLO1 Regular Size

Extra-Large Size

B-RLO2

RAPID LOAD-OUT

18 19

Specially designed opening to

maximize access to your gear

Compression strap to help bear

the load and avoid any additional

stress on the zipper

Our unique MOLLE Spine

design

Available in 2 Sizes Regular & Extra-Large

www.tacprogear.com

1000D Cordura Nylon

YKK Zippers


CARRIERS

Standard Sizes on all vests and carriers Small (S) Medium (M) Large (L) Extra Large (XL) CARRIERS


11/25

20

RAPID ASSAULTPLATE CARRIER

V-RAPC

The Tacprogear Rapid Assault Plate

Carrier was designed to provide

maximum protection and agility forlaw enforcement, military, and private

security operators.

Capable of holding two standard 10 x 12 ballistic plates in the smallest possible conguration

Ambidextrous zippered pocket allows access tothe Tacprogear Universal Tactical Pistol Wheel

Front and back MOLLE webbing

Reinforced drag handle

Padded shoulders

Adjustable shoulder and waist straps

Built for comfort and durability

Universal size

PISTOL

WHEEL

CARRIERS



plates p. 24

21

CONCEALED VESTV-CV1

Our standard Concealable Vest is

made of high quality cotton/Lycra

with a soil resistant nish. Providesextended torso and side coverage

with enhanced mobility. Air Mesh

inner lining keeps you cool and dry.

COVERT TACTICAL

VESTV-CVT1

Our basic tactical vest with MOLLE

webbing. Compatible with soft armor

panels from our concealed vest

(V-CV1). Internal plate pockets hold

standard 10 x 12 ballistic plates.

Standard Sizes on all vests and carriers: Small (S), Medium (M), Large (L), Extra Large (XL)

and Double Extra Large (XXL). 3XL-4XL and custom sizes available for surcharge.


OD-OD Green

CARRIERS

www.tacprogear.com

drag

strap

CARRIERS CARRIERSRight/Left


12/25

22

STANDARD TACTICAL VEST

V-STV1

Our STV provides basic

functionality and maximum

comfort. Ideal for Civilians,

NGOs and Law Enforcement

protection.

Reinforced drag handle.

Extended torso and side

coverage with enhanced

mobility. Air Mesh innerlining to keep you cool

and dry.

OUTER TACTICAL VEST

V-OTV1

Our OTV design was based upon the standard

military issue vest used by the US Army. Front opening with

overlapping protection, front and rear plate pockets, MOLLE

webbing, reinforced drag handle for emergency extraction,

& waist size adjustment.

PSD OPERATOR VEST

V-PSD1

Our PSD was designed for Private

Security personnel who require

additional mobility in the arm and

shoulder area. The low prole

design features front and rear plate

pockets, MOLLE webbing, and a

reinforced drag strap.

AVAILABLE

WITHOUT

PLATE

POCKET

V-STV2

CARRIERS

23

Ambidextrous single pull feature allows

rapid release

Front, back and side MOLLE webbing

Accommodates both soft and hard armor

Internal plate pockets t a standard

10 x 12 ballistic plate

Reinforced drag handle for emergency

extraction

Adjustable waist and shoulder hook and

loop system

Adjustable hook and loop cummerbund

system

Front and back loop sided strips for

applying ID patches

Non-slip shooters pad adapts to right or

left shoulder

CARRIERSQUICK RELEASE

TACTICAL VEST

V-QRTV1

The QRTV was developed for

maritime and other specialized

operations where the user may

need to quickly ditch equipment.

Ambidextrous single pull feature

allows rapid release.

Right/Left

Release

COMMERCIAL

MTV

V-CMTV1

The commercial version of the Modular Tactical Vest provides increased

protection, side coverage, and front and rear plate pockets. Optional groin,

neck and shoulder protection is available.

Improved closures with an optionalquick release system

Increased protection and coveragewith optional groin, neck and/or shoulder(DAPS) protection

Front, back, and side plate pockets

Reinforced drag handle foremergency extraction

ALL ARMOR

IS AVAILABLE IN

EITHER NIJ CERTIFIED

OR NIJ COMPLIANT

BALLISTIC PACKAGES

NIJ 0101.06

PACKAGES

AVAILABLE

www.tacprogear.com

drag

strap


HELMETSPLATES


13/25

www.tacprogear.com2 2www.tacprogear.com24 25

BALLISTIC STEEL

PLATE

A-BSRP1

Standard sizes 8 x 10 and

10 x 12 are available in either

6mm or 8mm thickness.

Black paint coating or nylon

cover available.

BALLISTICSHIELD

A-BESSCManufactured from the

latest high performanceballistic materials andtechnology available.

Options include glass panel,weapon slot, carry handle,

and various lightingcongurations.

10 x 12 BALLISTICCERAMIC PLATE

A-BCP1

Available in NIJ levels III, ICW, andIV stand-alone (SA) with a variety ofcuts including shooter, single curve

and multi-curve. Ceramic options include:Aluminum Oxide, Silicon Carbide

or Boron Carbide.

Tested in accordance to the NIJStandard-0101.04 & 0101.06

Available in 10 X 12 Shooters Cut

Tested in accordance to the NIJ Standar d-0101.04 & 0101.06 Available in 10X12 Shooters Cut

10 x 12 PE BALLISTICRIFLE PLATE

A-BPE1

The Tacprogear Ballistic PE Rie Plate is comprisedof a high performance polyethylene.

ALL ARMOR

IS AVAILABLE IN

EITHER NIJ CERTIFIED

OR NIJ COMPLIANT

BALLISTIC PACKAGES

SIDE SAPI PLATES

AVAILABLE (not shown)

PASGT HELMET

A-PASGT1

The PASGT (Personal Armor System Ground Troops) Helmet islightweight and functional with optimal protection, comfort andinsulation for all situations and weather conditions.

Features:

Tested to NIJ Standard-0101.06 Provides Level IIIA ballistic protection Ergonomic design to allow for full head rotations and visibility 3 & 4-point harness system for improved weight distribution

and easy adjustment (optional padding system available)

Available in: BK-Black OD-OD Green CT-Coyote Tan

ACH-MICH HELMETA-ACH1

The Tacprogear Advanced Combat Helmet (ACH)design is based on the Special Forces ModularIntegrated Communications Helmet (MICH). Thishelmet is available in standard and lightweight

congurations,with increased ballistic protection

Features:

Improved eld of vision Capable of attaching NVG mounts and communication accessories Available with 3 or 4-point adjustable harness (optional padding systems available) Coated with an epoxy primer and a Mil-Spec chemical agent resistant coating (CARC) Also available in Mid or High Cut/boltless available Lightweight UHMWPE available

Level IV

Stand Alone

Plate

Level III

Light Weight

Stand Alone

Plate


HELMETS GLOVES


14/25


SHOOTERG-OSFG

Lightweight & ventilated

Great for hot & humid conditions

Glove top is fully vented and breathable

Touch fasten wrist closure

COVERT STRIKE

G-HKCG

Hard knuckle protection reinforced with Kevlar

Leather ngertip increases sensitivity & nger control

Ideal grip for weapons & hand protection

Padded palm protects from impact & vibration

PROTECTOR

G-HKOG

Carbon ber knuckle protection

Tacky ngertips increase sensitivity & nger control

Ideal grip for weapons & hand protection

Padded palm protects from impact & vibration

GRIPG-LWTG

Padded palm & knuckles protect from impact & vibration

Tacky ngertips increase sensitivity & nger control

Neoprene padded knuckles

Superb dexterity: an excellent glove for shooters


BUMP HELMET

A-BUMP1

Lightweight Design/Non Ballistic Upper dovetail accessory rail for mounting devices such as

low-prole lights and helmet cams Lower dovetail accessory rail for mounting communication

headsets, battery pack, and other accessories Top and side strips of loop for attaching hook sided devices

like illuminators, strobe lights, and/or battery packs

Front mount for night vision, cameras, or other optic devices Padded suspension system with an adjustable 4-point

harness Available in: Multicam, Matte Black, OD Green and Desert Tan

Lightweight Design/Level IIIA Ballistic Protection Upper dovetail accessory rail for mounting devices such as low-prole lights and helmet cams

Lower dovetail accessory rail for mounting communicationheadsets, battery pack, and other accessories Top and side strips of loop for attaching hook sided devices like

illuminators, strobe lights, and/or battery packs Front mount for night vision, cameras, or other optic devices Padded suspension system with an adjustable 4-point harness Made in the USA with UHMWPE material Available in: Black, OD Green, and Desert Tan

SPEC-OPSHIGH CUT HELMET

A-SOHC1

DUTY GEAR Tacprogear manufactures the highest quality molded ballistic nylon duty gear.Our crisp, professional gear provides superior abrasion resistance,


15/25


Our crisp, professional gear provides superior abrasion resistance,high strength snaps, and always maintains its shape.

1 DG-DB1 Duty Belt w / Loop - Available in S, M, L, XL

2 DG-BLTK1 Belt Keepers

3 DG-EBC1 Expandable Baton Carrier

4 DG-MK3C1 MK3 Chemical Agent Case

5 DG-ULP1 Universal Light Pouch -fits 6P, 6R, TL-2, TT-2 and M6

6 DG-LXG1 Latex Glove Pouch

7 DG-SHC1 Single Handcuff Case

8 DG-RD01 Universal Radio Pouch

9 DG-TCC1 Taser Cartridge Case

10 DG-DPSR1 Double Pistol Magazine Case, Single Row11 DG-DPDR1 Double Pistol Magazine Case, Double Row

12 DG-DRFH1 Double Ring Flashlight / Baton Holder

13 DG-SPMC1 Single Pistol Magazine Case

14 DG-UCC1 Universal Cell Phone Case, Smart Phone

1

8

9

10-11

12

1314

3

4

5

6

7

All Tacprogear Duty Gear is manufactured with thehighest quality molded ballistic nylon and is designedfor comfort and functionality. Available in black only.

Features:

Constructed of 2 nylon webbing

Provides superior abrasion resistance

Loop sided interior

3-point closure for added retention

2

Single Rifle MagazineStaggered RifleTacprogear 1000D Cordura nylon with double stitched reinforced edging and

POCKETS/POUCHESPOCKETS/POUCHES


16/25


Pistol Pouches

Available with or without Grip Tite retention.

Rife Pouches

Single PistolMagazine Pouch

P-SPM1

Single RifleMagazine Pouch

P-SRM1

Single Rifle MagazinePouch (M4/M16) with

Universal PistolMag Pocket

P-RPM1

Magazine Pouch

M4/M16

P-STGRM1

Double RifleMagazine Pouch

P-DRM1

Triple RifleMagazine Pouch

P-TRM1

Double PistolMagazine Pouch

P-DPM1

Triple PistolMagazine Pouch

P-TPM1

Quad PistolMagazine Pouch

P-QPM1

reinforced pull tabsmaking them the toughest products available.

Squad AutomaticWeapon Dump Pouch

P-SAW

Single RifleMagazine Pouch(M4/M16) Open Top

P-SRMOT1

Fragmentation

Grenade PouchP-FRG1

Reinforced pull tabs Attaches to any MOLLE compatible system

Hook and loop closures



Dimensions:2D x 7.5W x 9.5H Dimensions:

1D x 4W x 5.5H

Dimensions:1.75D x 4W x 8.5H

Dimensions:1.25 D x 3.75 W x 6 H

Dimensions:4W x 5.5H x 0.5D

BAGS & PACKS

POCKETS/POUCHES

POCKETS/POUCHES Reinforced pull tabs

Attaches to an MOLLE compatible s stemTacprogear 1000D Cordura nylon with double stitched reinforced edging and

i f d ll t b ki th th t h t d t il bl


17/25

www.tacprogear.com

Flashbang PouchSingle

P-FRBG1

Flashbang PouchDouble

P-DFLBG1

SmokeGrenadePouch

P-SMRG1

Shotgun ShellPouch

18 round

P-SHTGN1

Flashbang PouchTriple

P-TFLBG1

Double

HandcuffPouch

P-DBLCF1

Night VisionGoggle Utility Pouch

P-NVUTL

Multi PurposeFlashlight Pouch

P-MPFL1

Admin/FlashlightPouch

P-ADFL1

MBITRRadio Pouch

P-MBTR1

Small RadioPouch

P-SMRAD1

Attaches to any MOLLE compatible system Hook and loop closures

reinforced pull tabsmaking them the toughest products available.



32 33

Dimensions: 1.25D x 4.5W x 7.25H

Dimensions:1.5D x 6.25W x 7.75H

Dimensions:0.5D x 7.25W x 8H



Dimensions:1D x 3.5W x 7H

Dimensions:1D x 3W x 6.75H

Dimensions:1D x 3.5W x 6.25H

BAGS & PACKS

POCKETS/POUCHESPOCKETS/POUCHES


18/25

Small GeneralPurpose Pouch

P-SMGP1

MediumUtility Pouch

P-UTYMD1

SmallUtility Pouch

P-UTYSM1

LargeUtility Pouch

P-UTYMD1

Medium GeneralPurpose Pouch

P-MDGP1

Large GeneralPurposePouch-Upright

P-LGGP1

Gas Mask Pouch

P-GSMK1




Reinforced pull tabs Attaches to any MOLLE compatible system Hook and loop closures

1000D Cordura Nylon YKK Zippers ITW Nexus accessories



Dimensions: 2D x 8W x 9.5H

Dimensions: .5D x 6.5W x 6H

Dimensions: 2D x 10.5W x 7H

Dimensions: 1.5D x 8.5W x 5.5H

Dimensions: 2.5D x 8W x 9.25H

ACCESSORIES


19/25

SINGLE-POINT SLINGS-SPS1

Made of high-quality nylon webbing, our bungeesling provides comfort and weapon support.

Compressed tubular nylon sheathing limits

bounce and enhances retention. Removable,

elastic-encased clip allows for quick rearm

attachment. Multiple attachment options available.

UNIVERSAL TWO-POINTSTRETCH SLINGS-UTPS1

Made of high-quality, elastic nylon webbing.

Flexible, closed-cell neoprene padding.

Non-slip backing keeps sling in place.

Multiple attachment options available.

WEAPONS

CLEANING KITAC-WKC1

OD Nylon Belt Pouch

.223 Caliber & 7.62mm

Bore Brush

Chamber Brush

Oil Bottle

Five piece assembly

CARABINERAC-CAB1

Available in OD Green,

Black, Coyote Tan &

Foliage. (Not for climbing)

USB FLASH DRIVEAC-USB1

4 Gigabyte Flash Drive

Key chain attachment

36 37www.tacprogear.com


ACCESSORIES ACCESSORIESUNIVERSALDROP LEGHOLSTER


20/25


BDU BELT

BT-BDUB

Hook and loop adjustment assures accurate sizing. 1 3/4 sizing meansthis belt will hold most pouches, belt accessories, and holsters.One size ts most.

MILITARY STYLE WEB BELTBT-MWB1

2.25 web belt with side release buckles. No metal. Hook & loopsize adjustment. Size S-up to 32; M-up to 40; L-up to 51

RIGGER BELTBT-URB1

1.75 webbing (7,000 lb tensile strength) with parachutegrade buckles and adapters. Hook and loop closure to securethe running end. Size S-up to 34; M-up to 41; L-41-51

H-DLH1

Fully adjustable drop-leg thighholster with quick-release beltmount. Elastic, rubberized leg

straps for stability and comfort.Adjustable thumb break withextra hook and loop retention.

Front-mounted pouch for extramagazine, knife, or light.

Right and left handcongurations available.

UNIVERSAL DROP LEGMUNITIONS POUCH

H-DLMP1

Fully adjustable, ambidextrousdrop-leg thigh munitions pouch.Elastic, rubberized leg straps forstability and comfort.Non-slip belt loop with heavy dutyhanger strap and quick releasebuckle. Designed to hold 6standard less lethal rounds37/40 mm and/or ash bangcanisters.

Adjustable quick releasebuckle closure

Exterior pouch to hold

additional lter/canister

Fits most gas masks Adjustable/removable

shoulder strap

Two rubberized legstraps with quickrelease buckles

Non-slip belt loop withheavy-duty hanger strapand quick-release buckle

DROP LEGGAS MASKPOUCH

H-DLGMP1

CROSS DRAW LBVL-CDRH1

Includes a universal pistol holster, fourpistol magazine pouches, three riemagazine pouches, and one smallutility pouch. Available in right-handedand left-handed models.

GRENADIER LBVL-GLBV1

Includes eight 38mm/40mm grenadepouches, three rie magazine pouches,and one small utility pouch.

EOD LBVL-EOD1

Includes a universal ashlight pouch,two shotgun shell pouches (18 rounds),three rie magazine pouches, onesmall utility pouch, and two mediumutility pouches.

TACTICAL ENTRY LBVL-TELBV1

Includes a universal ashlight pouch,two pistol magazine pouches, two riemagazine pouches, one small utilitypouch, and two shotgun shell pouches(18 rounds).

Tacprogear Load Bearing Vests (LBVs) feature padded non-skid shoulders, zippered interior pockets, and a hydration bladder pouch(bladder sold separately). Belt loops provide an easy way to secure the LBV to any belt. One Size Fits Most. Available in Coyote Tan and Black.

Load Bearing Vests

Belts available in: BK-Black CT-Coyote Tan


FLASHLIGHTS

FLASHLIGHTS


21/25


Dimensions:

Length: 100mm (3.9) / 117mm (4.6)(with AA extension tube)

Head diameter: 25.4mm (1)

Tube diameter: 24.3mm (0.96)Weight: 73g (2.57oz)(without battery) / 87g (3.0 7oz) (with AA

extension tube) (without battery)

AccessoriesQuality holster, removable clip, AA extension tube,

lanyard, spare tail cap button and spare O-ring

SRT3

SRT6

SRT7Dimensions:Length: 153mm (6)Head diameter: 34 mm (1.34)

Tube diameter: 25.4mm (1)

Weight: 145g (5.11oz)(without battery)

AccessoriesQuality holster, removable clip, tactical ring,

lanyard, spare tail cap button and spare O-ring

SRT7

Features

960 Lumens

Runtime on lowest

output level: 200hBeam distance: 308m

118650 Battery

2CR123 Batteries

Cree XM-L2 LED

SRT6

Purpose-designed for law enforcement, hunting and tactical applications

The worlds rst line of ashlights to feature third generationSSR (smart selector ring) technology

Smoothly and rapidly select brightness levels and function byrotating a smart selector ring

Features

930 Lumens

Runtime on lowest

output level: 200h

Beam distance: 260m

118650 Battery

2CR123 Batteries

Cree XM-L2 LED

SRT3

Features

550 Lumens

Runtime on lowest

output level: 50h

Beam distance: 115m

1RCR123 Battery

2CR123 Batteries

1AA Battery (included

extender tube)

Cree XM-L2 LED

HD: 25.4mm (1)

TD: 24.3mm (0.96)

L: 100mm (3.9)

W: 73g (2.57oz)

FLASHLIGHTS

Dimensions:

Length: 158mm (6.22)

Head diameter: 40 mm (1.57)

Tube diameter: 25.4mm (1)

Weight: 173g (6.1oz)(without battery)

Purpose-designed for law enforcement, hunting and tactical applications.

The worlds rst line of ashlights to feature third generation SSR (smart selector ring) technology

Smoothly and rapidly select brightness levels and function by rotating a smart selector ring

Utilizes the latest CREE XM-L (XM-L2 T6) LED

Second generation o f Crystal Coating Technology along with Precision Digital Optics Technologyprovide extreme reector performance

High efciency circuit board provides up to 200 hours runtime on lowest output level

Equipped with unique multi-colored (red, green and blue) tactical / signaling lights

Innite brightness adjustment

Multi-functional power indicator light displays low battery status

Patented spring-loaded impact absorption mechanism with reverse polarity protection

Stainless steel titanium-plated clip

Stainless steel retaining ring protects core components from damage

Toughened ultra-clear mineral glass with anti-reective coating

Constructed from aero grade aluminum alloy

Robust HAIII military grade hard-anodized

Waterproof in accordance with IPX-8 (two meters submersible)

Impact resistant to 1.5 meters

930

LUMENS 960

LUMENS

550

LUMENS


TM15

FLASHLIGHTS FLASHLIGHTS


22/25


MH40TM15

Premium CREE XM-L U2 LED

Maximum output of 900 lumens

High efciency regulation circuit

Maximum runtime of up to 105 hours

Intelligent charging circuit with voltage detection charges safely and rapidly

Integrated charging port is water, dust and impact resistant

Multiple output modes are conveniently accessed via rapid rotary switch

User-dened mode provides customized brightness levels plus strobe and SOS modes.

Intelligent memory function stores preferred brightness setting

Broad voltage circuit accepts both rechargeable and non-rechargeableLithium batteries

Optimized ultra-precise reector offers a longerbeam distance than competing products

Features

- At 2450 lumens the TM15 is worlds smallest and brightest rechargeable searchlight

- Utilizes 3 x CREE XM-L LEDs

- Thermal protection circuit prevents overheating

- Compatible with both 18650 Li-ion and CR123 batteries

- Intelligent charging circuit with status detection. Recharge easily, safely and quickly

- Exceptionally long run times using 4 18650 Li-ion or 8 CR123 batteries

- Capable of using 1 18650 or 2 x CR123 batteries in emergency situations

- Innovative single button two-stage switch provides a user-friendly interface (Patented)

- Integrated power indicator light displays remaining battery power (Patented)

- Power indicator secondary function d isplays battery voltage (accurate to 0.1V)

- Coated mineral glass resists scratches

- Aluminum reector ensures a consistent and powerful beam

- Stainless steel retaining ring protects the core components from damage

- Constructed from aircraft gr ade aluminum alloy

- HA III Military grade hard-anodized

- IPX-8 standard waterproof (two meters)

Maximum output of 900 Lumens

Waterproof in accordance with IPX-8 (submersible to two meters)

Stainless steel bezel ring protects core components from damage

Toughened ultra-clear mineral glass with anti-reective coating

Constructed from aerospace-grade aluminum alloy

HAIII military grade hard-anodized

Reverse polarity protection

Stainless steel titanium-plated clip

Anti-rolling design

Dimensions:

Length: 243mm (9.6)

Head Diameter: 60mm (2.36)

Tail Diameter: 25.4mm (1)

Weight: 311grams (11oz)(without battery)

Dimensions:

Length: 158mm (6.22)

Head diameter: 60 mm (2.36)

Tube diameter: 50mm (1.96)Weight: 447g (15.77oz) (without battery)

Accessories

Charger, quality holster, lanyard, spare O-ring

MH25HUNTINGKIT

MH25 Hunting KitHunting Kit Includes:

MH25USB cableNL183 BatteryNFR40 Filter(Red)NFG40 Filter(Green)RSW1 Remote SwitchTactical RingLanyardWeapon Mount (Differentregions different options)Holster

MH25-H

Features860 LumensRuntime on lowestOutput level: 28hBeam distance: 236m11 8650 Battery2 CR123 BatteriesCree XM-L U2 LEDRechargeableHD: 40mm (1.57)TD: 25.4mm (1)L: 160mm (6.3)W: 145g (5.1oz)

43

860

LUMENS

900

LUMENS

2450

LUMENS

FLASHLIGHTS


23/25

FOOTWEAR APPARELThe Tacprogear Tactical Boot features an authentic athletic fit, feel, and performance,as well as a shock eliminator pad that reduces heel strike impact for increased comfort.

APPAREL


24/25


6 QUICK REACTION FORCE BOOTF-QRFB2

Full grain leather

1000 denier nylon upper

Removable cushion insert

Shock eliminator system

Grip traction out sole

Reinforced eyelets

Available in Desert Tan and Black. Whole and halfsizes 7-13.5.

8 QUICK REACTION FORCE BOOTF-QRFB1

1000 denier nylon upper

Removable cushion insert

Shock eliminator system

Grip traction out sole

Reinforced eyelets

Speed laces

Available in Desert Tan and Black. Whole and halfsizes 7-13.5.

DESERT TAN

BLACK

APPARELWhen the pressure is on... Dont sweat it!

Tac Wears moisture wicking technology takes care of helping you

focus on getting the job done, by wicking away the perspiration

distraction factor. Whether youre exposed to extreme heat or are

bundled for extreme cold... our performance products are there to

keep your comfort level at its ultimate.

A complete line of apparel including:

Pants and shorts

Polo shirts

T-shirts Outerwear

Flame resistant garmets

Coveralls & ight suits

Underwear

BY

8 boot

available

with

side zipper

8 boot

available

with

side zipper

47



25/25

www.tacprogear.com2

TACPROGEAR

WWW.TACPROGEAR.COM

Documents

tacprogearcatlowresaug2013