3
B ILL B OARD B ACK TO C ONTENT HAWSER PIPE W ATERTIGHT DEVICE HAWSER PIPE WATERTIGHT DEVICE – MODEL: CAH Product Code: CA-1010 Wire Rope Size (mm) d1 (mm) d2 (mm) L (mm) Flange Dimensions (mm) D A T ɸ S Hole No. Bolt Size 52 – 58 70 93 320 250 210 25 18 8 M16 60 – 70 85 105 360 285 240 25 22 8 M16 72 – 78 136 113 420 340 295 25 22 8 M20 80 – 92 104 127 500 395 350 25 22 12 M20 95 – 110 122 145 560 445 400 28 22 12 M20 112 – 125 137 160 640 505 460 28 22 16 M20 Remark : 1. Operation Pressure : 7 Bar. 2. Oil-Resistance Split Sleeve. 3. Designed Water-Height on Device : 10M (1 Bar Pressure). 4. Pneumatic Pinch Valve as Watertight Device and Solenoid for control the air flow switch to measure the pressure that can convert to alarm to monitoring system. 5. Flange Standard : BS4504-10 bar, other standard as request. 6. Parts can be replaced without dis-engaged the mooring line. Total Customer Satisfaction P. 1 B ILL B OARD

5493f38e2849c

Embed Size (px)

DESCRIPTION

luol78kol

Citation preview

Page 1: 5493f38e2849c

BILLBOARD BACK TO CONTENT

HAWSER PIPE WATERTIGHT DEVICE

HAWSER PIPE WATERTIGHT DEVICE – MODEL: CAHProduct Code: CA-1010Wire RopeSize (mm)

d1(mm)

d2(mm)

L(mm)

Flange Dimensions (mm)

D A T ɸ S Hole No. Bolt Size

52 – 58 70 93 320 250 210 25 18 8 M1660 – 70 85 105 360 285 240 25 22 8 M1672 – 78 136 113 420 340 295 25 22 8 M20 80 – 92 104 127 500 395 350 25 22 12 M20 95 – 110 122 145 560 445 400 28 22 12 M20112 – 125 137 160 640 505 460 28 22 16 M20

Remark : 1. Operation Pressure : 7 Bar.2. Oil-Resistance Split Sleeve.3. Designed Water-Height on Device : 10M (1 Bar Pressure).4. Pneumatic Pinch Valve as Watertight Device and Solenoid for control the air flow switch to

measure the pressure that can convert to alarm to monitoring system.5. Flange Standard : BS4504-10 bar, other standard as request.6. Parts can be replaced without dis-engaged the mooring line.

Total Customer Satisfaction P. 1 BILLBOARD

Page 2: 5493f38e2849c

BILLBOARD BACK TO CONTENT

HAWSER PIPE WATERTIGHT DEVICE

Total Customer Satisfaction P. 2 BILLBOARD

Electric Pneumatic Watertight System

In Watertight Condition

Page 3: 5493f38e2849c

BILLBOARD BACK TO CONTENT

HAWSER PIPE WATERTIGHT DEVICE

SCOPE OF SUPPLY

A. Hawser Pipe Watertight Device B. Pneumatic Control1.

2.

3.

4.

5.

6.

Body Half: (AH 36) 2 pieces for bolt mounted with sleeve (air breather to seize the rope in water tight).

Sleeve Half: 2 pieces.

Guild Ring: As bearing surface to guild the rope inside the hawser pipe.

Flange: (AH36) for mounting Standard: BS4504-10 Bar.

Bolt and Nut: SS-316 – M16.

Working Pressure: 6 ~ 8 Bar.

1.

2.

3.

4.

5.

Pressure sensor, Solenoid valve and Pressure switch are cover by IP56 stainless steel cabinet with junction box for offshore used- with metal cable gland.

Pressure Sensor – Power: VDC24 Output: 4-20mA

Solenoid Valve 3/2: VAC110

Pressure Switch: VAC110

Regulator & Filter.

C. Operation Manual and Spare List D. Finishing1.

2.

3.

4.

Operation and Maintenance Manual.

Sleeve half: 2 pieces.

ABS Product Certificate.

Type Approval Certificate.

1.

2.

3.

Blasting.

Primer.

Surface Coating: 3 Layers ≥ 320µm.

Total Customer Satisfaction P. 3 BILLBOARD