Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Annex of the certificate (Page 1/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018
AB-0001-T Address:
Website : www.tse.org.tr
Fax : 0 312 416 66 11
: 0 312 416 62 00Phone
Testing Method
(National, International standards,
in house methods)
Tested
Materials / ProductsName of Test
As a Testing Laboratory
Necatibey cad. 112 Bakanlıklar 06100
ANKARA/TÜRKİYE
ELECTROTECHNICAL LABORATORY
PVC Insulated Cables Electrical test methods for low voltage
energy cables
TS EN 50395
EN 50395
Non electrical test methods for low voltage
energy cables
TS EN 50396
EN 50396
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 1: General
requirements
TS EN 50525-1
EN 50525-1
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 2-31: Cables for
general applications - Single core
non-sheathed cables with thermoplastic
PVC insulation
TS EN 50525-2-31
EN 50525-2-31
Polyinyl chloride insulated cables of rated
voltages up to and including 450/750 V part
4-Sheathed cables for fixed wiring
TS HD 21.4 S2
HD 21.4 S2
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (Uo/U) - Part 2-11: Cables for
general applications - Flexible cables with
thermoplastic PVC insulation
TS EN 50525-2-11
EN 50525-2-11
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 2-71: Cables for
general applications - Flat tinsel cables
(cords) with thermoplastic PVC insulation
TS EN 50525-2-71
EN 50525-2-71
Annex of the certificate (Page 2/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Polyvinil chloride insulated cables of radet
volgages up to and including 450/750 V-Part
8: Single core nonsheathed cables for
decorative chains
(PVC Insulated
Cables, continued)
TS HD 21.8 S2
HD 21.8 S2
Polyvinyl chloride insulated cables of rated
voltages up to and including 450/750 V --
Part 9: Single core non-sheathed cable for
installation at low temperatures
Amendment 1
TS HD 21.9 S2/A1
TS HD 21.9 S2
HD 21.9 S2
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 2-72: Cables for
general applications - Flat divisible cables
(cords) with thermoplastic PVC insulation
TS EN 50525-2-72
EN 50525-2-72
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 2-51: Cables for
general applications - Oil resistant control
cables with thermoplastic PVC insulation
TS EN 50525-2-51
EN 50525-2-51
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 3-11: Cables with
special fire performance - Flexible cables
with halogen-free thermoplastic insulation,
and low emission of smoke
TS EN 50525-3-11
EN 50525-3-11
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 3-31: Cables with
special fire performance - Single core
non-sheathed cables with halogen-free
thermoplastic insulation, and low emission
of smoke
TS EN 50525-3-31
EN 50525-3-31
Rubber Insulated
Cables
Cables of rated voltages up to and including
450/750 V and having cross-linked insulation
-- Part 3: Heat resistant silicone rubber
insulated cables
TS EN 50525-2-41
EN 50525-2-41
Annex of the certificate (Page 3/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (Uo/U) - Part 2-21: Cables for
general applications - Flexible cables with
crosslinked elastomeric insulation
(Excluding of With water resistant
Polychloropene or equivalent synthetic
elastomer sheathed cable)
(Rubber Insulated
Cables, continued)
TS EN 50525-2-21
EN 50525-2-21
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 2-81: Cables for
general applications - Cables with
crosslinked elastomeric covering for arc
welding
TS EN 50525-2-81
EN 50525-2-81
Rubber insulated cables to rated voltages up
to and including 450/750 V- Part 7: Cables
with increased heat resistance for internal
wiring for a conductor temperature of 110 C.
TS EN 50525-2-42
EN 50525-2-42
Rubber insulated cables of rated voltages up
to and including 450/750 V Part 8:
Polychloropene or equivalent synthetic
elastomer sheathed cable for decorative
chains
TS EN 50525-2-82
EN 50525-2-82
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 3-41: Cables with
special fire performance - Single core
non-sheathed cables with halogen-free
crosslinked insulation, and low emission of
smoke
TS EN 50525-3-41
EN 50525-3-41
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 3-21: Cables with
special fire performance - Flexible cables
with halogen-free crosslinked insulation,
and low emission of smoke
TS EN 50525-3-21
EN 50525-3-21
Annex of the certificate (Page 4/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Electric cables - Low voltage energy cables
of rated voltages up to and including
450/750 V (U0/U) - Part 2-22: Cables for
general applications - High flexibility
braided cables crosslinked elastomeric
insulation
(Rubber Insulated
Cables, continued)
TS EN 50525-2-22
EN 50525-2-22
Cables of rated voltages up to and including
450/750 V and having cross-linked insulation
- Part 15: Multicore cables insulated and
sheathed with heat resistant silicone rubber
TS EN 50525-2-83
EN 50525-2-83
Lift cables and Cables
for Flexible
Connections
Polyvinyl Chloride Insulated Cables of Rated
Voltages up to and Including 450/750 V Part
6:Lift Cables and Cables for Flexible
Connections
TS IEC 60227-6
IEC 60227-6
Flat Polyvinyl Choride sheathed flexible
cables
TS EN 50214
EN 50214
Conduit Systems for
Electrical
Installations
Rigid conduit systems TS EN 61386-1
EN 61386-1
TS EN 61386-21
EN 61386-21
Pliable conduit systems TS EN 61386-1
EN 61386-1
TS EN 61386-22
EN 61386-22
Distribution Cables Distribution cables of rated voltage 0,6 / 1
kV
TS HD 603 S1
HD 603 S1
Power cables with extruded insulation and
their accessories for rated voltages from 1
kV (U<(Index)m> = 1, 2 kV) up to 30 kV
(U<(Index)m> = 36 kV) - Part 1: Cables for
rated voltages of 1 kV (U<(Index)m> = 1, 2
kV) and 3 kV (U<(Index)m> = 3, 6 kV)
TS IEC 60502-1
IEC 60502-1
0,6 / 1 kV and 1,9 / 3,3 kV power cables with
special fire performance for use in power
stations
TS HD 604 S1
HD 604 S1
Annex of the certificate (Page 5/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Aerial bundled Cables with aluminium
conductor rated voltage 0,6/1 kV
(Except of Clause:2.3.2.6: Test of breaking
load of Aerial bundled)
(Distribution Cables,
continued)
TS 11654
Cables for Vehicles Cables for Vehicles TS 1435
Cables and Cords Test methods and requirements for
accessories for use on distribution cables of
rated voltage 0,6/1,0 (1,2) kV
TS EN 50393
EN 50393
Power cables with extruded insulation and
their accessories for rated voltages from 1
kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) -
Part 2: Cables for rated voltages from 6 kV
(Um = 7,2 kV) up to 30 kV (Um = 36 kV)
TS IEC 60502-2
IEC 60502-2
Cable management - Cable tray systems and
cable ladder systems
TS EN 61537
EN 61537
Household And
Similar Appliances
Safety of Household and Similar Electrical
Appliances - Part 1: General Requirements
TS EN 60335-1
EN 60335-1
IEC 60335-1
Safety of Household and Similar Electrical
Appliances - Part 2.2: Particular
Requirements for Vacuum Cleaners and
Water Suction Cleaning Appliances
TS EN 60335-2-2
EN 60335-2-2
IEC 60335-2-2
Safety of Household and Similar Electrical
Appliances-Part 2-3: Particular
Requirements for Electric Irons
TS EN 60335-2- 3
EN 60335-2-3
IEC 60335-2-3
Safety of Household and Similar Electrical
Appliances-Part 2.5: Particular
Requirements for Dishwashers
(Excluded products: appliances having no
heating elements)
TS EN 60335-2-5
EN 60335-2-5
IEC 60335-2-5
Safety of Household and Similar Electrical
Appliances - Part 2.6: Particular
Requirements for Stationary Cooking
Ranges, Hobs, Ovens and Similar Appliances
for Household Use
TS EN 60335-2-6
EN 60335-2-6
IEC60335-2-6
Annex of the certificate (Page 6/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Safety of Household and Similar Electrical
Appliances Part 2.7: Particular Requirements
for Washing Machines
(Excluded products: appliances having no
heating elements)
(Household And
Similar Appliances,
continued)
TS EN 60335-2-7
EN 60335-2-7
IEC60335-2-7
Safety of Household and Similar Electrical
Appliances Part 2-9: Particular Requirements
for Grills, Toasters and Similar Portable
Cooking Appliances
TS 2005 EN 60335-2-9
EN 60335-2-9
IEC60335-2-9
Safety of Household and Similar Electrical
Appliances Part 2.11 Particular
Requirements for Tumble Dryers
TS EN 60335-2-11
EN 60335-2-11
IEC60335-2-11
Safety of Household and Similar Electrical
Appliances - Part 2.13: Particular
Requirements for Deep Fat Fryers, Frying
Pans and Similar Appliances
TS EN 60335-2-13
EN 60335-2-13
IEC60335-2-13
Safety of Household and Similar Electrical
Appliances - Part 2-14: Particular
Requirements for Kitchen Machines
TS EN 60335-2-14
EN 60335-2-14
IEC60335-2-14
Household and similar electrical appliances -
Safety - Part 2-15: Particular requirements
for appliances for heating liquids
TS EN 60335-2-15
EN 60335-2-15
IEC60335-2-15
Safety of household and similar electrical
appliances - Part 2-21: Particular
requirements for storage water heaters;
(Amendment A12)
TS 2212 EN 60335-2-21
EN 60335-2-21
IEC 60335-2-21
Safety of household and similar electrical
appliances - Part 2-23: Particular
requirements for appliances for skin and
hair care; (Amendment A1)
TS 374 EN 60335- 2- 23
EN 60335-2-23
IEC 60335-2-23
Household and similar electrical appliances -
safety - Part 2-24: Particular requirements
for refrigerating appliances, ice-cream
appliances and ice-makers
TS EN 60335-2-24
EN 60335-2-24
IEC60335-2-24
Annex of the certificate (Page 7/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Household and similar electrical appliances -
Safety Part 2-28: Particular requirements for
sewing machines
(Household And
Similar Appliances,
continued)
TS EN 60335-2-28
EN 60335-2-28
IEC60335-2-28
Household and similar electrical appliances -
Safety - Part 2-29: Particular requirements
for battery chargers
TS EN 60335-2-29
EN 60335-2-29
IEC 60335-2-29
Safety of household and similar electrical
appliances - Part 2: Particular requirements
for room heaters
TS EN 60335-2-30
EN60335-2-30
IEC60335-2-30
Household and similar electrical appliances -
Safety - Part 2-31 : Particular requirements
for range hoods and other cooking fume
extractors
TS EN 60335- 2- 31
EN60335-2-31
IEC60335-2-31
Household and similar electrical appliances
-Safety - Part 2-35: Particular requirements
for instantaneous water heaters
TS EN 60335-2-35
EN60335-2-35
IEC60335-2-35
Safety of Household and Similar Electrical
Appliances-Part 2-43: Particular Requiments
for Clothes Dryers and Towel Rails
TS EN 60335- 2- 43
EN60335-2-43
IEC60335-2-43
Safety of Household and Similar Electrical
Appliances Part 2.44: Particular
Requirements for Ironers
TS EN 60335- 2- 44
EN60335-2-44
IEC60335-2-44
Safety of Household and Similar Electrical
Appliances Part 2-45: Particular
Requirements for Portable Heating Tools
and Similar Appliances
TS EN 60335- 2- 45
EN60335-2-45
IEC60335-2-45
Safety of Household and Similar Electrical
Appliances-Part 2.80: Particular
Requirements for Fans
TS EN 60335-2-80
EN60335-2-80
IEC60335-2-80
Annex of the certificate (Page 8/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Household refrigerating appliances -
Characteristics and test methods
(Excluding of Clause:11Testing the
durability of doors, lids and drawers and
Clause:12 Testing mechanical strength of
shelves and similar components.)
(Household And
Similar Appliances,
continued)
TS EN 62552
EN 62552
IEC 62552
Energy Efficiency for
Ovens
Household electric cooking appliances --
Part 1: Ranges, ovens, steam ovens and grills
- Methods for measuring performance
ANNEX-ZA: Requirements of Commision
directive for Enerji Labelling
TS EN 60350-1
EN 60350-1
Accesories And
Connecting Devices
For Electirical
Installations
Switches for Electrical Appliances; Part 1:
General Requirements
TS EN 61058-1
EN 61058-1
IEC 61058-1
Switches for Household and Similar
Fixed-Electrical Installations Part 1: General
Requirements
TS 4915 EN 60669-1
EN 60669-1
IEC 60669-1
Connecting Devices for Low Voltage Circuits
for Household and Similar Purposes Part 1:
General Requirements
TS 10486 EN 60998-1
EN 60998-1
IEC 60998-1
Connecting devices for low-voltage circuits
for household and similar purposes - Part
2-1: Particular requirements for connecting
devices as separate entities with screw-type
clamping units
TS 10487 EN 60998-2-1
EN 60998-2-1
IEC 60998-2-1
Boxes and enclosures for electrical
accessories for household and similar fixed
electrical installation - Part 1: General
requirements
TS EN 60670-1
EN 60670-1
Flat non-rewirable two-pole plugs, 2,5 A 250
V, with cord, for the connection of class
II-equipment for household and similar
purposes
TS EN 50075
EN 50075
Annex of the certificate (Page 9/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Lamp Controlgear Glow-Starters for Fluorescent Lamps TS 805 EN 60155
EN 60155
IEC 60155
Lamp controlgear -- Part 1: General and
safety requirements
TS EN 61347-1
EN 61347-1
IEC 61347-1
Lamp controlgear - Part 2-8: Particular
requirements for ballasts for fluorescent
lamps
TS EN 61347-2-8
EN 61347-2-8
IEC 61347-2-8
Lamp controlgear -- Part 2-9: Particular
requirements for ballasts for discharge
lamps (excluding fluorescent lamps)
TS EN 61347-2-9
EN 61347-2-9
IEC 61347-2-9
Luminaires Luminaires - Part 1: General requirements
and tests
(Except of Annex P UV Radition)
TS EN 60598-1
EN 60598-1
IEC 60598-1
Luminaires-Part 2: Particular
Requirements-Section One: Fixed General
Purpose Luminaires
TS 8698 EN 60598-2-1
EN 60598-2-1
IEC 60598-2-1
Luminaires - Part 2-2: Particular
requirements - Recessed luminaires
TS EN 60598-2-2
EN 60598-2-2
IEC 60598-2-2
Luminaires -- Part 2-3: Particular
requirements - Luminaires for road and
street
TS 8700 EN 60598-2-3
EN 60598-2-3
IEC 60598-2-3
Luminaires -- Part 2-5: Particular
requirements - Floodlights
TS 8702 EN 60598-2-5
EN 60598-2-5
IEC 60598-2-5
Plugs and Socket
Outlets
Marking TS 40
TS IEC 60884-1
IEC 60884-1
Checking of Dimensions TS 40
TS IEC 60884-1
IEC 60884-1
Annex of the certificate (Page 10/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Protection Against Electric Shock(Plugs and Socket
Outlets, continued)
TS 40
TS IEC 60884-1
IEC 60884-1
Provision of Earthing TS 40
TS IEC 60884-1
IEC 60884-1
Terminals TS 40
TS IEC 60884-1
IEC 60884-1
Construction of Fixed Socket- Outlets TS 40
TS IEC 60884-1
IEC 60884-1
Construction of Plugs and Portable Socket-
Outlets
TS 40
TS IEC 60884-1
IEC 60884-1
Resistance to Ageing, to Harmful Ingress of
Water and to Humidity
TS 40
TS IEC 60884-1
IEC 60884-1
Insulation Resistance and Electric Strength TS 40
TS IEC 60884-1
IEC 60884-1
Temperature Rise TS 40
TS IEC 60884-1
IEC 60884-1
Breaking Capacitiy TS 40
TS IEC 60884-1
IEC 60884-1
Normal Operation TS 40
TS IEC 60884-1
IEC 60884-1
Force Necessary to Withdraw the Plug TS 40
TS IEC 60884-1
IEC 60884-1
Annex of the certificate (Page 11/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Flexible Cables and Their Connection(Plugs and Socket
Outlets, continued)
TS 40
TS IEC 60884-1
IEC 60884-1
Mechanical Strength TS 40
TS IEC 60884-1
IEC 60884-1
Resistance to Heat TS 40
TS IEC 60884-1
IEC 60884-1
Screws, Current Carrying Parts and
Connections
TS 40
TS IEC 60884-1
IEC 60884-1
Creepage Distances, Clearences and
Distances Through Sealing Compound
TS 40
TS IEC 60884-1
IEC 60884-1
Resistance of Insulating Material to
Abnormal Heat, to Fire and to Tracking
TS 40
TS IEC 60884-1
IEC 60884-1
Resistance to Rusting TS 40
TS IEC 60884-1
IEC 60884-1
Plugs and socket-outlets for household and
similar purposes - Part 2: Particular
requirements for adaptors
TS 40
TS IEC 60884-2-5
IEC 60884-2-5
Electromagnetic
Compatibility -
Residential,
Commercial and Light
- Industrial
Environments
Mains Terminal Disturbance Voltage (150kHz
- 30MHz) Network: Mono phase and
triphase, 0-16A
TS EN 61000-6-3
EN 61000-6-3
IEC 61000-6-3
Electrostatic Discharge Immunity Test (+/-
polarities; Air Discharge: 200V - 16.5kV,
Contact Discharge: 200V - 9kV)
TS EN 61000-6-1
EN 61000-6-1
IEC 61000-6-1
Annex of the certificate (Page 12/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Electrical Fast Transient/ Burst Immunity
Test
(Voltage Level: 0-4800 V, f: 0-1000 kHz)
(Electromagnetic
Compatibility -
Residential,
Commercial and Light
- Industrial
Environments,
continued)
TS EN 61000-6-1
EN 61000-6-1
IEC 61000-6-1
Surge Immunity Test
( 0.2 - 4,5 kV)
TS EN 61000-6-1
EN 61000-6-1
IEC 61000-6-1
Immunity To Conducted Disturbances,
Induced By Radio-Frequency Fields
(Frequency Range 150kHz - 80MHz ; at levels
1V, 3V, 10V )
TS EN 61000-6-1
EN 61000-6-1
IEC 61000-6-1
Electromagnetic
Compatibility -
Industrial
Environments
Products
Mains Terminal Disturbance Voltage (150kHz
- 30MHz) Network: Mono phase and tri
phase, 0-16A
TS EN 61000-6-4
EN 61000-6-4
IEC 61000-6-4
Electrostatic Discharge Immunity Test (+/-
polarities; Air Discharge: 200V - 16.5kV,
Contact Discharge: 200V - 9kV)
TS EN 61000-6-2
EN 61000-6-2
IEC 61000-6-2
Electrical Fast Transient / Burst Immunity
Test
(Voltage Level: 0-4800 V, f: 0-1000 kHz)
TS EN 61000-6-2
EN 61000-6-2
IEC 61000-6-2
Surge Immunity Test
( 0.2 - 4,5 kV)
TS EN 61000-6-2
EN 61000-6-2
IEC 61000-6-2
Immunity To Conducted Disturbances,
Induced By Radio-Frequency Fields
(Frequency Range 150kHz - 80MHz ; at levels
1V, 3V, 10V )
TS EN 61000-6-2
EN 61000-6-2
IEC 61000-6-2
Annex of the certificate (Page 13/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Electromagnetic
Compatibility -
Household
Appliances, Electric
Tools and Similar
Apparatus
Mains Terminal Disturbance Voltage (150kHz
- 30MHz) Network: Monophase and triphase,
0-16A
TS EN 55014-1
EN 55014-1
CISPR 14-1
Mains Terminal Disturbance Voltage (30MHz
- 300MHz)
TS EN 55014-1
EN 55014-1
CISPR 14-1
Discontinuous Interference
(160 kHz, 500 kHz, 1.4 MHz, 30 Hz) Network:
Monophase and triphase, 0-16A
TS EN 55014-1
EN 55014-1
CISPR 14-1
Electrostatic Discharge Immunity Test (+/-
polarities; Air Discharge: 200V - 16.5kV,
Contact Discharge: 200V - 9kV)
TS EN 55014-2
EN 55014-2
CISPR 14-2
Electrical Fast Transient/ Burst Immunity
Test (Voltage Level: 0-4800 V, f: 0-1000 kHz)
TS EN 55014-2
EN 55014-2
CISPR 14-2
Surge Immunity Test
( 0.2 - 4,5 kV)
TS EN 55014-2
EN 55014-2
CISPR 14-2
Immunity To Conducted Disturbances,
Induced By Radio-Frequency Fields
(Frequency Range 150kHz - 230MHz ; at
levels 1V, 3V, 10V )
TS EN 55014-2
EN 55014-2
CISPR 14-2
Voltage Dips, Short Interruptions And
Voltage Variations ImmunityTests (Between
Levels %0.UT - %100.UT; time periods 0.05 -
9999ms )
TS EN 55014-2
EN 55014-2
CISPR 14-2
Electromagnetic
Compatibility -
Information
Technology
Equipments
Mains Terminal Disturbance Voltage (150kHz
- 30MHz) Network: monophase and triphase,
0-16A
TS EN 55022
EN 55022
CISPR 22
Annex of the certificate (Page 14/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Electrostatic Discharge Immunity Test
(+/- polarities; Air Discharge: 200V -
16.5kV,Contact Discharge: 200V - 9kV)
(Electromagnetic
Compatibility -
Information
Technology
Equipments,
continued)
TS EN 55024
EN 55024
CISPR 24
Electrical Fast Transient/ Burst Immunity
Test (Voltage level: 0-4800 V, f: 0-1000 kHz)
TS EN 55024
EN 55024
CISPR 24
Surge Immunity Test
( 0.2 - 4,5 kV)
TS EN 55024
EN 55024
CISPR 24
Immunity To Conducted Disturbances,
Induced By Radio-Frequency Fields
(Frequency Range 150kHz - 80MHz; at levels
1V, 3V, 10V )
TS EN 55024
EN 55024
CISPR 24
Voltage Dips, Short Interruptions And
Voltage Variations Immunity Tests
(Between Levels %0.UT - %100.UT; time
periods 0.05 - 9999ms )
TS EN 55024
EN 55024
CISPR 24
Electromagnetic
Compatibility -
Industrial, Scientific
and Medical (ISM)
Radio-Frequency
Equipment
Mains Terminal Disturbance Voltage (150kHz
- 30MHz) Network: Mono phase and
triphase, 0-16A
TS EN 55011
EN 55011
CISPR 11
Electromagnetic
Compatibility -
Equipment with
Rated Current up to
16A per Phase
Harmonics
(Between harmonics 2-40. )
TS EN 61000-3-2
EN 61000-3-2
IEC 61000-3-2
Voltage Changes, Fluctuations And Flicker
(transient and prolonged)
TS EN 61000-3-3
EN 61000-3-3
IEC 61000-3-3
Annex of the certificate (Page 15/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Electromagnetic
Compatibility-Electri
cal and Electronics
Equipment subjected
to Static Electricity
Discharges, From
Operators Directly
and to adjacent
Objects
Electrostatic Discharge Immunity Test (+/-
polarities; Air Discharge: 200V - 16.5kV,
Contact Discharge: 200V - 9kV)
TS EN 61000-4-2
EN 61000-4-2
IEC 61000-4-2
Electromagnetic
Compatibility -
Electrical and
electronic Equipment
Subjected To
Electrical Fast
Transient/Burst
Electrical Fast Transient/ Burst Immunity
Test (Voltage Level: 0-4800 V, f: 0-1000 kHz)
TS EN 61000-4-4
EN 61000-4-4
IEC 61000-4-4
Electromagnetic
Compatibility -
Electrical and
Electronic Equipment
Subjected To
undirectional surges
caused by over
volteges from
switching and
lighting transients
Surge Immunity Test
( 0.2 - 4,5 kV)
TS EN 61000-4-5
EN 61000-4-5
IEC 61000-4-5
Electromagnetic
Compatibility -
Electrical And
Electronic Equipment
Subjected To
Conducted
Disturbances,
Induced By Radio -
Frequency Fields
From 9 kHz to 80 MHz
Immunity To Conducted Disturbances,
Induced By Radio-Frequency Fields
(Frequency Range 150kHz - 230MHz; at levels
1V, 3V, 10V )
TS EN 61000-4-6
EN 61000-4-6
IEC 61000-4-6
Annex of the certificate (Page 16/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Electromagnetic
Compatibility -
Electrical and
Electronic Equipment
Connected To Low
Voltage Power
Supply
Voltage Dips,Short Interruptions And
Voltage Variations Immunity Tests
(Between Levels %0.UT - %100.UT; time
periods 0.05 - 9999ms )
TS EN 61000-4-11
EN 61000-4-11
IEC 61000-4-11
Electromagnetic
Compatibility -
Equipment With
Rated Current up to
16A per Phase
Harmonics and interharmonics including
mains signalling at a.c. power port, low
frequency immunity tests
TS EN 61000-4-13
EN 61000-4-13
IEC 61000-4-13
Cables for use in
Photovoltaic (PV)
Systems
Electric cables for photovoltaic systems
(BT(DE/NOT)258)
(Except of Clause:7.3.9
Weathering/UV resistance )
TS EN 50618
EN 50618
CHEMISTRY LABORATORY
Cement Determination of Loss On Ignition TS EN 196-2
EN 196-2
Determination of Chloride TS EN 196-2
EN 196-2
Determination of Residue Insoluble in HCl
and Na₂CO₃
TS EN 196-2
EN 196-2
Gravimetric Determination of Sulphate TS EN 196-2
EN 196-2
Pozzolanicity Test TS EN 196-5
EN 196-5
Determination of the water-soluble
chromium (VI) content of cement
TS EN 196-10
EN 196-10
Organic Fertilizers Determination of Total Nitrogen Content
with CHN Analyzer
Burning Method at High Temparature
(Combustion Metod)(950 °C)
AOAC 993.13
Annex of the certificate (Page 17/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Ammonium Nitrate
Fertilizers
Determination of Total Carbon Content with
CHN Analyzer
Burning Method at High Temparature (950
°C)
In house method (LAB-D-7-TL-079)
Chemical Fertilizers Determination of Water- Soluble Potassium
Content in Fertilizers
Analysis : Gravimetric Method
Chemical Fertilizer Regulations
App.-3
Method 4.1
TS EN 15477
Chemical Fertilizers Determination of Total Phosphorus
Preprocess: Extraction of Soluble phosphate
in Mineral Acids
Analysis: Kinolin Fosfomolibdat-Gravimetric
Method
Chemical Fertilizer Regulations
App.-3
Method 3.1.1
Method 3.2
TS EN 15959
Organic Fertilizers Determination of Water- Soluble Potassium
Content in fertilizers
Analysis : Gravimetric Method
Chemical Fertilizer Regulations
App.-3
Method 4.1
Organic Fertilizers Determination of Total Phosphorus
Preprocess: Extraction of Soluble phosphate
in Mineral Acids
Analysis: Kinolin Fosfomolibdat- Gravimetric
Metod
Chemical Fertilizer Regulations
App.-3
Method 3.1.1
Method 3.2
TS EN 15959
Organic Fertilizer Organic Fertilizer- Determination of Organic
Substances
Dry burning at 550°C -
Analysis : Gravimetric Method
Regulation of organic,
organomineral fertilizers and soil
regulators that used in agriculture
and roduction of other products
that are microbial, enzym content
and
other organic source, imports,
exports and market supply Annex -
18 Method of Analysis
Annex of the certificate (Page 18/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Organic Fertilizer Organic Fertilizer- Determination of pH
Analysis : Potentiometrical Method
Regulation of organic,
organomineral fertilizers and soil
regulators that used in agriculture
and production of other products
that are microbial, enzym content
and other organic source , imports,
exports and market supply Annex -
18 Method of Analysis
Toys Small Parts Cylinder TS EN 71-1
EN 71-1
(Method 8.2)
Torque Test TS EN 71-1
EN 71-1
(Method 8.3)
Drop Test TS EN 71-1
EN 71-1
(Method 8.5)
Tip Over Test TS EN 71-1
EN 71-1
(Method 8.6)
Soaking Test TS EN 71-1
EN 71-1
(Method 8.9)
Accessibility of a part or component TS EN 71-1
EN 71-1
(Method 8.10)
Sharpness of edges TS EN 71-1
EN 71-1
(Method 8.11)
Sharpness of points TS EN 71-1
EN 71-1
(Method 8.12)
Annex of the certificate (Page 19/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Flexibility of Metallic Wires(Toys, continued) TS EN 71-1
EN 71-1
(Method 8.13)
Geometric Shape of Certain Toys TS EN 71-1
EN 71-1
(Method 8.16)
Durability of Mouth Actuated Toys TS EN 71-1
EN 71-1
(Method 8.17)
Folding or Sliding Mechanisms TS EN 71-1
EN 71-1
(Method 8.18)
Cords Cross-sectional Dimension TS EN 71-1
EN 71-1
(Method 8.20)
Static Strength TS EN 71-1
EN 71-1
(Method 8.21)
Dynamic Strength TS EN 71-1
EN 71-1
(Method 8.22)
Stability TS EN 71-1 (Method 8.23)
EN 71-1
Determination of Kinetic Energy TS EN 71-1 (Method 8.24)
EN 71-1
General Conditions for Flammability TS EN 71-2 (Method 5.1)
EN 71-2
Annex of the certificate (Page 20/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Test relating to
beards, moustaches,
wigs, etc., made from
hair, pile or material
with similar features
(e.g. free-hanging
ribbons, paper, cloth
strands or other
flowing
elements),which
protrude 50 mm or
more from the
surface of the toy
Flammability test TS EN 71-2 Method 5.2
Test relating to
beards, moustaches,
wigs, etc., made from
hair, pile or material
with similar features
(e.g. free-hanging
ribbons, paper, cloth
strands or other
flowing elements),
which protrude less
than 50 mm from the
surface of the toy,
and full or partial
moulded head masks
Flammability test
TS EN 71-2 Method 5.3
Annex of the certificate (Page 21/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Test relating to
flowing elements of
toys to be worn on
the head, hoods,
head-dresses, etc.
and masks not
covered by which
partially or fully
cover the head (e.g.
fabric and cardboard
masks, eye masks,
face masks), toy
disguise costumes
and toys intended to
be entered or worn
by a child
Flammability Test TS EN 71-2 Method 5.4
Test for soft-filled
toys
Flammability Test TS EN 71-2 Method 5.5
Toy Migration of elements (Al, Sb, As, Ba, B, Cd
Co, Cu, Pb, Mn, Hg, Ni, Se, Sr, Sn, Toplam Cr,
Zn, except Cr VI and organic Sn) from toy
materials, parts of toys and child care
articles (by ICP-OES and ICP-MS)
TS EN 71-3
EN 71-3
ISO 8124-3
Vulcanized Rubber Determination of Density TS ISO 2781 Method A
ISO 2781 Method A
Plastics Specific Gravity and Density of Plastics TS 1310
Method A
Plastics and ebonite Determination of Indentation Hardness
(Shore Hardness) (Shore A ve D)
TS EN ISO 868
EN ISO 868
ISO 868
Rubber, vulcanized
or thermoplastic
Determination of Abrasion Resistance TS ISO 4649 Method A
ISO 4649 Method A
Rubber-Vulcanized,
Thermoplastic
Determination of Hardness
(Hardness between 10 IRHD and 100 IRHD)
TS ISO 48
ISO 48
Annex of the certificate (Page 22/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Personal Protective
Equipment -
Footwear
Determination of Thickness of Outsole TS EN ISO 20344 Method 8.1
EN ISO 20344 Method 8.1
Determination of Impact Resistance of
Toecap
TS EN ISO 20344 Method 5.4
EN ISO 20344 Method 5.4
Unplasticized
polyviniylchloride
(PVC-U) profiles
Thickness of walls of main profile TS 5358 EN 12608
Clause 5.3.2 Thickness of walls of
main profile
Plastic - Non-cellular
Plastic
Determination of Density TS EN ISO 1183-1 Method A
EN ISO 1183-1 Method A
Plastic, nylon,
polyester and PVC
materials
Determinatıon of Bisphenol A (BPA) In-house method
(LAB-D-7-DTL-032)
Coated textiles,
plastic, packaging
materials, toys,
footwear
Determination of Phtalate (by GC-MS) Inhouse Method
LAB-D-7-DTL-024 ( Referred to EN
14372, EN 15777, ISO/TS 16181,
CPSC-CH-C1001-09.3)
Synthetic Detergents Determination of Total Surface Active
Agents
(Ethanol Extraction Method)
TS 518
Clause 2.3.4
Textile Methods for determination of certain
aromatic amines derived from azo colorants
(by GC-MS, LC-MS/MS)
Inhouse Method
LAB-D-7-DTL-022 (Referred to
EN14362-1)
Porcelain, ceramic
and glassware
Determination of Lead (Pb) and Cadmium
(Cd)
TS 4422 ISO 6486-2
Silicate Surfaces
Materials and Articles in Contact with
Foodstuffs- Determination of the Release of
Lead and Cadmium from Ceramic Ware
TS EN 1388-1
EN 1388-1
Ceramic Tiles
Determination of lead and Cadmium given
off by glazed tiles
TS EN ISO 10545-15
EN ISO 10545-15
Annex of the certificate (Page 23/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Calsinated Tincal The Determination of Fe Element
Pretreatment : Digestion by Aqua Regia
Metod
Measurement : ICP-OES Metod
In house Method “LAB-D-7-DTL-037“
(IReferred to TS EN 13650)
CONSTRUCTION MATERIALS LABORATORY
Terrazzo tiles-
Terrazzo tiles for
internal use
Dimensional deviations TS 213-1 EN 13748-1
EN 13748-1
Straightness of edges of the upper face TS 213-1 EN 13748-1
EN 13748-1
Flatness of the upper face TS 213-1 EN 13748-1
EN 13748-1
Breaking strength and Breaking load TS 213-1 EN 13748-1
EN 13748-1
Water absorption TS 213-1 EN 13748-1
EN 13748-1
Slip resistance TS 213-1 EN 13748-1
EN 13748-1
Abrasion resistance(Bohme test method) TS 213-1 EN 13748-1
EN 13748-1
Terrazzo tiles
-Terrazzo tiles for
external use
Dimensional deviations TS 213-2 EN 13748-2
EN 13748-2
Straightness of edges of the upper face TS 213-2 EN 13748-2
EN 13748-2
Flatness of the upper face TS 213-2 EN 13748-2
EN 13748-2
Breaking strength and Breaking load TS 213-2 EN 13748-2
EN 13748-2
Water absorption TS 213-2 EN 13748-2
EN 13748-2
Slip resistance TS 213-2 EN 13748-2
EN 13748-2
Annex of the certificate (Page 24/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Abrasion resistance (Bohme test method)(Terrazzo tiles
-Terrazzo tiles for
external use,
continued)
TS 213-2 EN 13748-2
EN 13748-2
Cement Determination of strength TS EN 196-1
EN 196-1
Setting time TS EN 196-3+A1
EN 196-3+A1
Soundness TS EN 196-3+A1
EN 196-3+A1
Aggregates Determination of particle size distribution
sieving method
TS EN 933-1
EN 933-1
Determination of particle shape- Flakiness
index
TS EN 933-3
EN 933-3
Determination of Particle Shape - Shape
Index
TS EN 933-4
EN 933-4
Determination of percentage of crushed and
broken surfaces in coarse aggregate
particles
TS EN 933-5
EN 933-5
Assessment of surface characteristics - Flow
coefficient of aggregates
TS EN 933-6
EN 933-6
Determination of shell content - Percentage
of shells in coarse aggregates
TS EN 933-7
EN 933-7
Assessment of fines- Sand equivalent TS EN 933-8 + A1
EN 933-8 + A1
Assessment of fines - Methylene blue test TS EN 933-9+A1
EN 933-9+A1
Determination of the resistance to ware
(Micro- Deval)
TS EN 1097-1
EN 1097-1
Methods for the determination of resistance
to fragmentation-Los Angeles
TS EN 1097-2
EN 1097-2
Determination of loose bulk density and
voids
TS EN 1097-3
EN 1097-3
Annex of the certificate (Page 25/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Determination of particle density and water
absorption(Aggregates,
continued)
TS EN 1097-6
EN 1097-6
Determination of the polished stone value
(Resistance of coarse agregates to polishing)
TS EN 1097-8
EN 1097-8
Determination of the polished stone value
(Aggregate abrasion value -AAV)
TS EN 1097-8
EN 1097-8
Determination of the affinity between
aggregate and bitumen
TS EN 12697-11
EN 12697-11
Determination of resistance to freezing and
thawing
TS EN 1367-1
EN 1367-1
Tests for thermal and weathering properties
of aggregates- Part 2: Magnesium sulfate
test
TS EN 1367-2
EN 1367-2
Volume Stability - Drying Shrinkage TS EN 1367-4
EN 1367-4
Tests for thermal and weathering properties
of aggregates: Determination of resistance
to thermal shock
TS EN 1367-5
EN 1367-5
Particle length TS 7043 EN 13450
Alkali Reactivity Mortar-Bar Method ASTM C 1260
CSA A23.2-25A
Compressive Strength of Mortar Test
Specimens
TS EN 1744-1+A1
EN 1744-1+A1
Stiffening Time of Mortar Test Specimens TS EN 1744-1+A1
EN 1744-1+A1
Determination of potential presence of
humus
TS EN 1744-1+A1
EN 1744-1+A1
Determination of fulvo acid content TS EN 1744-1+A1
EN 1744-1+A1
Deterrmination of alkali reactivity of
aggregates (mortar bar method)
TS 13516
Concrete kerb units Thickness of facing layer TS 436 EN 1340-App.C
EN 1340
Annex of the certificate (Page 26/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Combinations of
cementitious
materials and
aggregate
Deterrmination of alkali reactivity
(accelerated mortar bar method)
TS 13517
Bending strength TS 436 EN 1340 - App.F
EN 1340
Abrasion according to the Böhme test TS 436 EN 1340 - App. H
EN 1340
Slip/skid resistance TS 436 EN 1340 - App.I
EN 1340
Due to weather the effects of wear
resistance (water absorption)
TS 436 EN 1340-App.E
EN 1340
Due to weather the effects of wear
resistance (freeze thaw)
TS 436 EN 1340-App.D
EN 1340
Concrete paving
blocks
Thickness of facing layer TS 2824 EN 1338 - App. C
EN 1338
Abrasion according to the Böhme test TS 2824 EN 1338 - App. H
EN 1338
Slip/skid resistance TS 2824 EN 1338- App. I
EN 1338
Due to weather the effects of wear
resistance (water absorption)
TS 2824 EN 1338-App.E
EN 1338
Due to weather the effects of wear
resistance (freeze thaw)
TS 2824 EN 1338-App.D
EN 1338
Tensile splitting strength TS 2824 EN 1338 - App. F
EN 1338
Slabs of natural stone
for external paving
Determination of the slip resistance TS EN 1341
EN 1341
Shape and dimensions TS EN 1341
EN 1341
Measurement of abrasion resistance TS EN 1341
EN 1341
Annex of the certificate (Page 27/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Setts of natural stone
for external paving
Determination of the slip resistance TS EN 1342
EN 1342
Shape and dimensions TS EN 1342
EN 1342
Measurement of abrasion resistance TS EN 1342
EN 1342
Kerbs of natural
stone for external
paving
Shape and dimensions TS EN 1343
EN 1343
Natural Stones Determination of abrasion resistance
TS EN 14157 - (Method A)
EN 14157
Determination of compressive strength TS EN 1926
EN 1926
Determination of water absorption
coefficient by capillarity
TS EN 1925
EN 1925
Böhme Abrasion Test
TS EN 14157 - Method B
EN 14157
Determination of the slip resistance TS EN 14231
EN 14231
Determination of breaking load at dowel
hole
TS EN 13364
EN 13364
Determination of resistance to ageing by
thermal shock
TS EN 14066
EN 14066
Determination of real density and apparent
density, and of total and open porosity
(except real density)
TS EN 1936
EN 1936
Determination of water vapour transmission
properties
TS EN ISO 12572
EN ISO 12572
Natural stone
products
- Modular tiles
- Slabs for floors and
stairs
Shape and dimensions TS EN 13373
EN 13373
Annex of the certificate (Page 28/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Natural stone
products
-Kerbs of natural
stone for external
paving
-Slabs of natural
stone for external
paving
- Modular tiles
-Slabs for floors and
stairs
Determination of frost resistance TS EN 12371
EN 12371
Flexural strength TS EN 12372
EN 12372
Water absorption at atmospheric pressure TS EN 13755
EN 13755
Pedestrian surfaces Pendulum friction test TSE CEN/TS 16165
CEN/TS 16165
Concrete paving
blocks
Shape and Dimensions TS EN 1339
EN 1339
Thickness of surface layer TS EN 1339
EN 1339
Flexural strength TS EN 1339
EN 1339
The breaking load TS EN 1339
EN 1339
Abrasion resistance
(With Large Disk)
TS EN 1339
EN 1339
Abrasion resistance (Bohme Method) TS EN 1339
EN 1339
Due to weather the effects of wear
resistance (Free Thaw)
TS EN 1339 (Annex D)
EN 1339
Slip/Skid Resistance TS EN 1339
EN 1339
Annex of the certificate (Page 29/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Due to weather the effects of wear
resistance (Water absorption)(Concrete paving
blocks, continued)
TS EN 1339 (Annex-E)
EN 1339
Concrete Compressive strength of concrete test
specimens
TS EN 12390-3
EN 12390-3
Determination of density of hardened
concrete
TS EN 12390-7
EN 12390-7
Determination of Tensile Splitting Strength TS EN 12390-6
EN 12390-6
Wood-based panels Determination of moisture content TS EN 322
EN 322
Determination of density TS EN 323
EN 323
Determination of dimensions of boards-
Part 1: Determination of thickness, width
and length
TS EN 324-1
EN 324-1
Wood-Based panels- Determination of
dimensions of boards- Part 2: Determination
of squareness and edge straightness
TS EN 324-2
EN 324-2
Determination of modulus of elasticity in
bending and of bending strength (Max 4
tons)
TS EN 310
EN 310
Surface soundness - Test method (Max 4
tons)
TS EN 311
EN 311
Determination of dimensions of test pieces TS EN 325
EN 325
Sampling, cutting and inspection - Part 1:
Sampling test pieces and expression of test
results
TS EN 326-1
EN 326-1
Particleboards and
fibreboards
Determination of swelling in thickness after
immersion in water
TS EN 317
EN 317
Determination of tensile strength
perpendicular to the plane of the board
(Max 4 tons)
TS EN 319
EN 319
Annex of the certificate (Page 30/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
High-pressure
decorative laminates
(HPL) - Sheets based
on thermosetting
resins (usually called
laminates)
Resistance to surface wear TS EN 438-2
EN 438-2
Resistance to abrasion ( flooring grade
laminates )
TS EN 438-2
EN 438-2
Substrate protection againts water vapour TS EN 438-2
EN 438-
Resistance to water vapour TS EN 438-2
EN 438-2
Resistance to dry heat TS EN 438-2
EN 438-2
Resistance to scratching TS EN 438-2
EN 438-2
Resistance to staining TS EN 438-2
EN 438-2
Furniture Surfaces Determination of Abrasive Resistance TS EN 15185
EN 15185
Determination of Resistance to Glowing
Cigarette
TS 4756
Furniture - Assessment of surface resistance
to cold liquids
TS EN 12720 + A1
EN 12720 + A1
Furniture - Assessment of surface resistance
to wet heat
TS EN 12721 + A1
EN 12721 + A1
Furniture - Assessment of surface resistance
to dry heat
TS EN 12722 + A1
EN 12722 + A1
Furniture - Assessment of the surface gloss TS EN 13722
EN 13722
Furniture - Assessment of the surface
resistance to scratching
TS EN 15186
EN 15186
Annex of the certificate (Page 31/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Assessment of the surface reflectance(Furniture Surfaces,
continued)
TS EN 13721
EN 13721
Furniture surface,
Wood-based panels
and construction
materials
Furniture - Assessment of the effect of light
exposure
TS EN 15187
EN 15187
High-pressure decorative laminates (HPL) -
Sheets based on thermosetting resins
(usually called laminates) - Part 2:
Determination of properties
-Art. 27 Lightfastness (xenon arc)
-Art. 28 Resistance to UV light (Exterior
grade laminates)-Art 29 Resistance to
artificial weathering (Exterior grade
laminates)
TS EN 438-2
EN 438-2
Plastics - Methods of exposure to laboratory
light sources - Part 1: General guidance
TS EN ISO 4892-1
EN ISO 4892-1
Plastics - Methods of exposure to laboratory
light sources - Part 2: Xenon-arc lamps
TS EN ISO 4892-2
EN ISO 4892-2
Plastics - Methods of exposure to laboratory
light sources - Part 3: Fluorescent UV lamps
TS EN ISO 4892-3
EN ISO 4892-3
Paints and varnishes - Methods of exposure
to laboratory light sources - Part 1: General
guidance
TS EN ISO 16474-1
EN ISO 16474-1
Paints and varnishes - Methods of exposure
to laboratory light sources - Part 2:
Xenon-arc lamps
TS EN ISO 16474-2
EN ISO 16474-2
Paints and varnishes - Methods of exposure
to laboratory light sources - Part 3:
Fluorescent UV lamps
TS EN ISO 16474-3
EN ISO 16474-3
Textiles-Tests For Colour Fastness (Part A02)
Grey Scale For Assessing Staining
TS 423-2 EN 20105-A02
EN 20105-A02
Annex of the certificate (Page 32/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Flexible sheets for waterproofing - Bitumen,
plastic and rubber sheets for roof
waterproofing - Method of artificial ageing
by long term exposure to the combination
of UV radiation, elevated temperature and
water
(Furniture surface,
Wood-based panels
and construction
materials, continued)
TS EN 1297
EN 1297
Wood-based panels - Melamine faced
boards for interior uses - Test methods
Art. 5.12 Resistance to colour change in
xenon arc light
TS EN 14323
EN 14323
Office Furniture Office furniture- Work tables and desk- Part
1: Dimensions
TS EN 527-1
EN 527-1
Office furniture - Work tables and desks -
Part 2: Mechanical safety requirements
TS EN 527-2
EN 527-2
Office furniture - Work tables and desks -
Part 3: Methods of test for the
determination of the stability and the
mechanical strength of the structure
TS EN 527-3
EN 527-3
Office furniture - Screens - Part 1:
Dimensions
TS EN 1023-1
EN 1023-1
Office furniture - Screens - Part 2:
Mechanical safety requirements
TS EN 1023-2
EN 1023-2
Office Furniture - Screens - Part 3: Test
methods
TS EN 1023-3
EN 1023-3
Office Furniture-Office work chair-Part
1:Dimensions-Determination of dimensions
TS 5337-1 EN 1335-1
EN 1335-1
Office furniture - Office work chair - Part 2:
Safety requirements
TS EN 1335-2
EN 1335-2
Office furniture - Office work chair - Part 3:
Test methods
TS EN 1335-3
EN 1335-3
Office furniture - Storage furniture - Part 2:
Safety requirements
TS EN 14073-2
EN 14073-2
Annex of the certificate (Page 33/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Office furniture - Storage furniture - Part 3:
Test methods for the determination of
stability and strength of the structure
(Office Furniture,
continued)
TS EN 14073-3
EN 14073-3
Office furniture - Tables and desks and
storage furniture - Test methods for the
determination of strength and durability of
moving parts
TS EN 14074
EN 14074
Domestic Furniture Domestic and kitchen storage units and
worktops - Safety requirements and test
methods
TS EN 14749
EN 14749
Kitchen furniture - Co-ordinating sizes for
kitchen furniture and kitchen appliances
TS EN 1116
EN 1116
Domestic furniture - Beds and mattresses -
Safety requirements and test methods
TS EN 1725
EN 1725
Domestic furniture- Beds and mattresses-
Methods of measurement and
recommended tolerances
TS EN 1334
EN 1334
Domestic furniture- Beds and mattresses-
Test methods for the determination of
functional characteristics
TS EN 1957
EN 1957
Domestic furniture - Tables - Test methods
for determination of strength, durability and
stability
TS EN 1730
EN 1730
Domestic furniture - Seating - Test methods
for the determination of strength and
durability
TS EN 1728
EN 1728
Domestic furniture-Seating-Determination
of stability
TS EN 1022
EN 1022
Furniture Furniture - Children's cots and folding cots
for domestic use - Part 1: Safety
requirements
TS EN 716-1 + A1
EN 716-1 + A1
Furniture - Children's cots and folding cots
for domestic use - Part 2: Test methods
TS EN 716-2 + A1
EN 716-2 + A1
Annex of the certificate (Page 34/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Furniture- Cribs and cradles for domestic
use- Part 1: Safety requirements(Furniture,
continued)
TS EN 1130-1
EN 1130-1
Furniture- Cribs and cradles for domestic
use- Part 2: Test methods
TS EN 1130-2
EN 1130-2
Furniture - Bunk beds and high beds - Part 1:
Safety, strength and durability requirements
TS EN 747-1 + A1
EN 747-1 + A1
Furniture - Bunk beds and high beds - Part 2:
Test methods
TS EN 747-2 + A1
EN 747-2 + A1
Furniture - Chairs and tables for educational
institutions - Part 1: Functional dimensions
TS EN 1729-1
EN 1729-1
Furniture - Chairs and tables for educational
institutions - Part 2: Safety requirements
and test methods
TS EN 1729-2+A1
EN 1729-2+A1
Furniture- Ranked seating- Test methods
and requirements for strength and
durability
TS EN 12727
EN 12727
Furniture - Strength, durability and safety -
Requirements for non-domestic tables
TS EN 15372
EN 15372
Furniture - Links for non- domestic seating
linked together in a row - Strength
requirements and test methods
TS EN 14703
EN 14703
Furniture - Strength, durability and safety -
Requirements for domestic seating
TS EN 12520
EN 12520
Furniture - Strength, durability and safety -
Requirements for domestic tables
TS EN 12521
EN 12521
Furniture - Strength, durability and safety -
Requirements for non-domestic seating
TS EN 16139
EN 16139
Non-domestic storage furniture -
Requirements for safety, strength,
durability and stability
TS EN 16121
EN 16121
Domestic and non-domestic storage
furniture - Test methods for the
determination of strength, durability and
stability
TS EN 16122
EN 16122
Annex of the certificate (Page 35/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Glass in furniture - Test methods(Furniture,
continued)
TS EN 14072
EN 14072
Outdoor Furniture Outdoor furniture - Seating and tables for
camping, domestic and contract use - Part 1:
General safety requirements
TS EN 581-1
EN 581-1
Outdoor furniture - Seating and tables for
camping, domestic and contract use - Part 2:
Mechanical safety requirements and test
methods for seating
TS EN 581-2
EN 581-2
Outdoor furniture - Seating and tables for
camping, domestic and contract use - Part 3:
Mechanical safety requirements and test
methods for tables
TS EN 581-3
EN 581-3
Writing boards for
educational
institutions
Writing boards for educational institutions -
Ergonomic, technical and safety
requirements and their test methods
TS EN 14434
EN 14434
Workbenches for
Laboratories
Workbenches for laboratories - Dimensions,
safety requirements and test methods
TS EN 13150
EN 13150
Laboratory Furniture Laboratory furniture - Storage units for
laboratories - Requirements and test
methods
TS EN 14727
EN 14727
Children's High
Chairs
Children's high chairs - Part 1: Safety
requirements
TS EN 14988-1 + A1
EN 14988-1 + A1
Children's high chairs - Part 2: Test methods TS EN 14988-2 + A1
EN 14988-2 + A1
Hardware for
Furniture
Hardware for furniture - Strength and
durability of extension elements and their
components
TS EN 15338 + A1
EN 15338 + A1
Hardware for furniture - Strength and
durability of slide fittings for sliding doors
and roll fronts
TS EN 15706
EN 15706
Annex of the certificate (Page 36/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Hardware for furniture - Strength and
durability of hinges and their components -
Stays and hinges pivoting on a horizontal
axis
(Hardware for
Furniture ,
continued)
TS EN 15828
EN 15828
Hardware for furniture - Strength and
durability of hinges and their components -
Hinges pivoting on a vertical axis
TS EN 15570
EN 15570
Playground
Equipment and
Surfacing
Playground equipment and surfacing - Part
2: Additional specific safety requirements
and test methods for swings
-Clause 4.6 Impact attenuation of swing
seats
-Clause 4.7 Dynamic load for swing
equipment
TS EN 1176-2
EN 1176-2
Impact attenuating playground surfacing -
Determination of critical fall height
TS EN 1177
EN 1177
Castors and wheels Castors and wheels - Test methods and
apparatus
TS EN 12527
EN 12527
Castors and wheels - Castors for furniture -
Requirements
TS EN 12528
EN 12528
Castors and wheels - Castors for furniture -
Castors for swivel chairs - Requirements
TS EN 12529
EN 12529
Castors and wheels - Castors and wheels for
manually propelled institutional
applications
TS EN 12530
EN 12530
Castors and wheels - Hospital bed castors TS EN 12531
EN 12531
Castors and wheels - Castors and wheels for
applications up to 1,1 m/s (4 km/h)
(Up to 400 kg)
TS EN 12532
EN 12532
Castors and wheels - Castors and wheels for
applications over 1,1 m/s (4 km/h) and up to
4,4 m/s (16 km/h)
(Up to 400 kg)
TS EN 12533
EN 12533
Annex of the certificate (Page 37/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Adhesives for tiles Determination of tensile adhesion strenght
for cementitious adhesives
TS EN 1348
EN 1348
Adhesives for tiles Determination of open time TS EN 1346
EN 1346
Adhesives for tiles Determination of shear adhesion strenght of
dispersion adhesives
TS EN 1324
EN 1324
Adhesives for tiles Determination of shear adhesion strenght of
reaction resin adhesives
TS EN 12003
EN 12003
Screed materials Determination of flexural and
compressive strength
TS EN 13892-2
EN 13892-2
Liquid-applied water
impermeable
products for use
beneath
ceramic tiling
bonded with
adhesives
Initial tensile adhesion strength TS EN 14891
EN 14891
Tensile adhesion strength after water
contact
TS EN 14891
EN 14891
Tensile adhesion strength after heat ageing TS EN 14891
EN 14891
Tensile adhesion strength after freeze-thaw
cycles
TS EN 14891
EN 14891
Tensile adhesion strength after contact with
lime water
TS EN 14891
EN 14891
Waterproofing TS EN 14891
EN 14891
Crack bridging ability under standard
conditions
TS EN 14891
EN 14891
Crack bridging ability at low temperature
(-5°C) / Crack bridging ability at very low
temperature (-20°C)
TS EN 14891
EN 14891
Annex of the certificate (Page 38/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Grout For Tiles
Determination Of Resistance To Abrasion TS EN 12808-2
EN 12808-2
Determination of flexural and compressive
strength / Flexural and compressive
strength after freeze-thaw cycles
TS EN 12808-3
EN 12808-3
Determination Of Shrinkage TS EN 12808-4
EN 12808-4
Determination of water absorption
TS EN 12808-5
EN 12808-5
Mortar for masonry,
cement based
adhesive and plaster
- for thermal
insulation board
Determination of flexural and compressive
strength of hardened mortar
TS EN 1015-11
EN 1015-11
Adhesives for
ceramic tiles
Determination of tensile adhesion strength
for cementitious adhesives
TS EN 12004-2
EN 12004-2
Adhesives for
ceramic tiles
Determination of open time TS EN 12004-2
EN 12004-2
Adhesives for
ceramic tiles
Determination of shear adhesion strength of
dispersion adhesives
TS EN 12004-2
EN 12004-2
Adhesives for
ceramic tiles
Determination of shear adhesion strength of
reaction resin adhesives
TS EN 12004-2
EN 12004-2
Adhesives for
ceramic tiles
Determination of transverse deformation of
cementitious adhesives
TS EN 12004-2
EN 12004-2
Adhesives for
ceramic tiles
Determination of slip TS EN 12004-2
EN 12004-2
FOOD LABORATORY
Cereal and Cereal
Products
Determination of Moisture Content
(Reference Method)
TS EN ISO 712
ISO 712
Annex of the certificate (Page 39/39)
Accreditation Scope
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Accreditation Nr: AB-0001-T
Revision Nr: 025 Date: 12.07.2018AB-0001-T
Testing Method
(National, International standards,
in house methods)
Name of Test Tested
Materials / Products
Cereals, pulses and
by-products
Determination of Ash Yield by Incineration TS EN ISO 2171
ISO 2171
Spices and
Condiment Herbs
Determination of Total Ash Content TS 2131 ISO 928
ISO 928
Tea Determination of Moisture Content TS 1562
ISO 1573
Determination of Total Ash Content TS 1564
ISO 1575
Determination of Water Soluble Ash and
Water Insoluble Ash
TS 1565
ISO 1576
Determination of Alkalinity of Water Souble
Ash
TS 1567
ISO 1578
Determination of Water Extract TS ISO 9768
ISO 9768
Vegetable Fats and
Oils
Determination of Acid Value and Acidity TS EN ISO 660
EN ISO 660
Determination of Peroxide Value -
Iodometric (Visual) Endpoint Determination
TS EN ISO 3960
EN ISO 3960
Analysis of Methyl Esters of Fatty Acids by
Gas Cromatography
TS EN ISO 12966-4
EN ISO 12966-4
TS EN ISO 12966-2
EN ISO 12966-2
Food Feed Enumeration of Coagulase Positive
Staphylococci (Staphylococcus aureus and
Other Species)
Colony Count Tecnique
TS 6582-1 EN ISO 6888-1
EN ISO 6888-1
Wheat Flour Determination of acidity TS 4500 cl. 5.3.8
End of Scope
Dr. H. İbrahim ÇETİN
Secretary General
Annex of the certificate (Page 1/2)
Accreditation Scope / Additional assessment document for this scope : EA 2/17
Revision Nr: 025 Date: 12.07.2018
Accreditation Nr: AB-0001-T
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
AB-0001-TAddress:
Website
Fax
Phone : 0 312 416 62 00
: 0 312 416 66 11
: www.tse.org.tr
Regulation (EU) No 305/2011 Construction products
Commission
Decision
Product Family, Product
/ Intended Use
Technical Requirements,
Standards / Body Function
As a Testing Laboratory
Necatibey cad. 112 Bakanlıklar 06100
ANKARA/TÜRKİYE
CONSTRUCTION MATERIALS LABORATORY (ANKARA)
97/808/EC Floorings (2/2) :
- Rigid flooring products
(a) Components: paving units, tiles, mosaics,
parquet, decking of mesh or sheet, floor
gratings, rigid laminated floorings, wood
based products (for internal uses including
enclosed public transport premises).
TS EN 12057:2007
EN 12057:2004
TS EN 12057:2015
EN 12057:2015
Test Lab. (System 3)
98/437/EC Internal wall and ceiling finishing (2/5):
-Tiles (internal or external finishes in walls
or ceilings subject to regulations about
"Safety in Use")
TS EN 12057:2007
EN 12057:2004
TS EN 12057:2015
EN 12057:2015
Test Lab.(System 3)
98/437/EC Internal and external wall and ceiling
finishes (4/5) :
- Cladding slabs (as internal or external
finishes in walls or ceilings, as relevant,
subject to regulations on dangerous
substances).
TS EN 1469:2006
EN 1469:2004
TS EN 1469:2015
EN 1469:2015
Test Lab. (System 3)
99/90/EC Membranes (1/3):
- Damp proof courses (in buildings)
TS EN 14891:2012
EN 14891:2012
TS EN 14891:2012/AC:2013
EN 14891:2012/AC:2012
Test Lab.(System 3)
Accreditation Scope / Additional assessment document for this scope : EA 2/17
Annex of the certificate (Page 2/2)
Revision Nr: 025 Date: 12.07.2018
Accreditation Nr: AB-0001-T
TSE DENEY VE KALİBRASYON MERKEZİ BAŞKANLIĞI Ankara Deney
Laboratuvarları
Regulation (EU) No 305/2011 Construction products
AB-0001-T
Technical Requirements,
Standards / Body Function
Product Family, Product
/ Intended Use Commission
Decision
99/470/EC Construction adhesives (1/2):
- Adhesives for tiles (for internal and
external uses in buildingsand other civil
engineering works)
TS EN 12004:2007+A1:2013
EN 12004:2007+A1:2012
TS EN 12004-1:2017
EN 12004-1:2017
Test Lab.(System 3)
CHEMISTRY LABORATORY (ANKARA)
98/437/EC Internal and external wall and ceiling
finishes (4/5) : - Tiles (as internal or external
finishes in walls or ceilings, as relevant,
subject to regulations on dangerous
substances)
TS EN 14411:2013
EN 14411:2012
Test Lab. (System 3)
End of Scope
Dr. H. İbrahim ÇETİN
Secretary General