BR_TD_EN_30

8/21/2019 BR_TD_EN_30

1/46

Switches and Indicators 14

8/21/2019 BR_TD_EN_30

2/46

Switches and Indicators

150

01.2002

Series 14

Description

Product Assembly

Product Range

- pushbuttons for standard mounting

- pushbuttons for flush mounting- accessories / spare parts

Technical Data

Technical Drawing / Dimension / Layout

Circuit Drawing

Typical Applications

Marking

Page 151

Page 152

Page 172

Page 175

Page 183

Page 193

Page 194

Page 153

Page 160Page 165

Index

8/21/2019 BR_TD_EN_30

3/46

Description 14

15101.2002

General Notes

The Series 14 il luminated pushbuttons combine the robust actuators

of the Series 04 with a choice of either snap-action switching ele-ments with gold plated silver contacts, low level switching elemtensor upon request, 2.8 mm plug in terminals with silver contacts for onechangeover only.These pushbuttons have an IP 67 proof front and can be immersedto a depth of one metre.The range includes pushbuttons, keylock switches and selectorswitches.

Mounting

Mounted from the front through either 22.5 mm diameter cut out forraised or 30.5 mm diameter for flush.The pushbuttons are secured to the panel by means of a fixing ring/nut and prevented from twisting by two screws.To ensure correct positioning of the pushbuttons we can provide a

positioning insert if required.The low level switching elements with universal terminals allow themto PCB mounted. These terminals are also suitabel for dip soldering.

A plug in base is available, which when soldered to the board allowsthe swith to be easily plugged in.

Lenses

The flat lenses, made of polyamide, are available in various colours,as well as translucent or transparent.

Marking

For engravings, hot stamping and film inserts, see Marking on page194.

Illumination

Perfect illumination of the different coloured lenses is assured bylamps T 5,5 (6-60 V).For supply voltages above 60 V, it is necessary to use a voltage re-duction element (external series resistor, capacitor or transformer).Do not solder the terminals directly, because of the high surface tem-perature.Multi-LEDs T 5,5 (6, 12, 24, 48 V) are available in the colours white,red, yellow and green.

Position Indicating

When a switch with maintained action is actuated, the lens remainsin the depressed position mechanically. The state of the switch is ap-parent at all times from the position of the lens.

All dimensions in mm.We reserve the right to modify technical data.

Keylock switches

Safety lock (Index K).

Single locks (2 positions).10 different locks with standard numbers 1001-1010. If the locknumber is not specified, we will supply No. 1001. An additional 690locks with numbers 1011-1700 are available on request. For numbers1001-1700 no master key can be supplied. Two keys are suppliedwith each keylock switch.Spare keys for KABA safety locks may be ordered by quotingNo. 14-987 (please state the lock number).

Combined locking systems

Information supplied on request.

Number structure

14-XXX.0XXKind of terminals

Contact material

Switch variant

Example: -Illuminated pushbutton; momentary action,

gold-plated silver contact; soldering

terminals;1 switching element

14-131.025

-Lens red, transparent

704.602.2

-Front ring; aluminium, natural anodized

704.600.1

-Marking plate; white, translucent

704.609.9

Specimen order

Indicator front illumination- indicator front illumination,

soldering terminal 14-040.005Recommended accessories:- lens plastic, opaque black 704.6020- marking foil for lens plastic/metal black704.609.0- frontring, aluminium black 704.6020- LED. 1 chip, 12 VDC, white 10-2109.3139

8/21/2019 BR_TD_EN_30

4/46

14product assembly

152

01.2002

illuminated-/pushbutton

0

1 front ring

2 lens

3 marking plate

4 switch housing

5 fixing nut

pushbutton-/illuminated pushbutton for flush mounting

0

1 front bezel bracket for flush mounting

2 lens

3 marking plate

4 switch housing

5 front panel

6 pressure ring

7 fixing nut

8/21/2019 BR_TD_EN_30

5/46

14Pushbuttons for standard mounting

15308.2002

dlens plastic page 165

dmarking foil for lens plastic/metal page 166

dfront ring page 167

dfilament lamp page 169

dLED page 170

connection method : soldering terminal = S, soldering-/plug-in terminal = -, universal terminal = UT

see inscription

circuit drawings from page 183, technical drawings from page 175, mounting dimensions from page 181, component layouts from page 182

dlens cap for indiactor full face illumination page 165

dmarking cap for lens cap for indicator full face illumination page 166


dLED page 170


see inscription


indicator front illumination

co

nnectionmethod

29 mm dia.

Typ-Nr. circuitdrawing

technicaldrawing

mountingdimensions

co

mponentlayout

eindicator front illumination S 14-040.005 1 1 1 0,050

- 14-040.002 1 1 1 0,050

UT 14-041.006 2 1 1 1 0,050

indicator full face illumination

dio

des

connectionmethod

29 mm dia.


tec

hnicaldrawing

mo

untingdimensions

componentlayout

e

indicator full face illumination - S 14-030.005 1 1 1 0,010

- 14-030.002 1 1 1 0,010

UT 14-031.006 2 1 1 1 0,011

1 UT 14-741.006 3 2 1 1 0,011

2 UT 14-742.006 4 2 1 1 0,011

8/21/2019 BR_TD_EN_30

6/46


154

08.2002


dlens metal page 165


dlens raised, plastic page 165

dmarking cap for lens raised plastic/metal page 166



dLED page 170

switching system : snap-action switching element = SA, low level switching element = LL

contacts : normally closed = NC, normally open = NO, 1 normally open = 1 NO, 1 normally closed = 1 NC

switching action : momentary action = M, maintained action = MA


see marking page 194


illuminated-/pushbutton

switchingsy

stem

contacts

diode(1N4007)

switchingac

tion

connectionm

ethod

29 mm dia.


technicaldra

wing

mountingdimensions

componentlayout

e

illuminated-/pushbutton LL 1 NO - M UT 14-435.036 21 5 1 1 0,015

MA UT 14-475.036 26 5 1 1 0,015

1 NC - M UT 14-436.036 23 5 1 1 0,015

MA UT 14-476.036 28 5 1 1 0,015

1 NC + 1 NO - M UT 14-433.036 25 5 1 1 0,015

MA UT 14-473.036 30 5 1 1 0,015

2 NO - M UT 14-431.036 22 5 1 1 0,015

MA UT 14-471.036 27 5 1 1 0,015

2 NC - M UT 14-432.036 24 5 1 1 0,015

MA UT 14-472.036 29 5 1 1 0,015

SA 1 NC + 1 NO - M S 14-131.0252 5 3 1 0,013

- 14-131.022 5 3 1 0,013

MA S 14-271.0252 9 3 1 0,013

- 14-271.022 9 3 1 0,013

1 M UT 14-743.0292 13 4 1 1 0,014

MA UT 14-747.0292 17 4 1 1 0,014

2 M UT 14-744.0292 14 4 1 1 0,014

MA UT 14-748.0292 18 4 1 1 0,014

2 NC + 2 NO - M S 14-132.0252 6 3 1 0,015

MA S 14-272.0252 10 3 1 0,015

1 M UT 14-745.0292 15 4 1 1 0,016

MA UT 14-749.0292 19 4 1 1 0,016

2 M UT 14-746.0292 16 4 1 1 0,016

MA UT 14-750.0292 20 4 1 1 0,016

3 NC + 3 NO - M S 14-133.0252 7 3 1 0,017

MA S 14-273.0252 11 3 1 0,017

4 NC + 4 NO - M S 14-134.0252 8 3 1 0,019

MA S 14-274.0252 12 3 1 0,019

8/21/2019 BR_TD_EN_30

7/46


15508.2002

dmushroom-head cap page 166

dmarking plate for mushroom-head cap page 166






see marking 194


pushbutton with mushroom-head cap

switchingsystem

contacts

switchingaction

connectionmethod

40 mm dia.


technicaldrawing

mountingdimensions

componentlayout

e

pushbutton with mushroom-head cap LL 1 NO M UT 14-435.036 21 7 2 1 0,015MA UT 14-475.036 26 7 2 1 0,015

1 NC M UT 14-436.036 23 7 2 1 0,015

MA UT 14-476.036 28 7 2 1 0,015

1 NC + 1 NO M UT 14-433.036 25 7 2 1 0,015

MA UT 14-473.036 30 7 2 1 0,015

2 NO M UT 14-431.036 22 7 2 1 0,015

MA UT 14-471.036 27 7 2 1 0,015

2 NC M UT 14-432.036 24 7 2 1 0,015

MA UT 14-472.036 29 7 2 1 0,015

SA 1 NC + 1 NO M S 14-131.0252 5 6 2 0,013

- 14-131.022 5 6 2 0,013

MA S 14-271.0252 9 6 2 0,013

- 14-271.022 9 6 2 0,0132 NC + 2 NO M S 14-132.0252 6 6 2 0,015

MA S 14-272.0252 10 6 2 0,015

3 NC + 3 NO M S 14-133.0252 7 6 2 0,017

MA S 14-273.0252 11 6 2 0,017

4 NC + 4 NO M S 14-134.0252 8 6 2 0,019

MA S 14-274.0252 12 6 2 0,019

8/21/2019 BR_TD_EN_30

8/46


156

08.2002

dmushroom-head cap illuminated page 166

dmarking plate for mushroom-head cap page 166



dLED page 170




connection method : universal terminal = UT, soldering terminal = S, soldering-/plug-in terminal = -

see marking 194


illuminated pushbutton with mushroom-head cap

switchingsystem

contacts

diode(1N

4007)

switchingaction

conn

ectionmethod

40 mm dia.Typ-Nr. c

ircu

itdrawing

technicaldrawing

mou

ntingdimensions

componentlayout

e

illuminated pushbutton with mushroom-head cap LL 1 NO - M UT 14-435.036 5 7 2 1 0,015

MA UT 14-475.036 6 7 2 1 0,015

1 NC - M UT 14-436.036 7 7 2 1 0,015

MA UT 14-476.036 8 7 2 1 0,015

1 NC + 1 NO - M UT 14-433.036 9 7 2 1 0,015

MA UT 14-473.036 10 7 2 1 0,015

2 NO - M UT 14-431.036 11 7 2 1 0,015

MA UT 14-471.036 12 7 2 1 0,015

2 NC - M UT 14-432.036 5 7 2 1 0,015

MA UT 14-472.036 9 7 2 1 0,015

SA 1 NC + 1 NO - M S 14-131.0252 21 6 2 0,013

- 14-131.022 22 6 2 0,013

MA S 14-271.0252 23 6 2 0,013

- 14-271.022 24 6 2 0,013

1 M UT 14-743.0292 13 8 2 1 0,014

MA UT 14-747.0292 17 8 2 1 0,014

2 M UT 14-744.0292 14 8 2 1 0,014

MA UT 14-748.0292 18 8 2 1 0,014

2 NC + 2 NO - M S 14-132.0252 24 6 2 0,015

MA S 14-272.0252 26 6 2 0,015

1 M UT 14-745.0292 15 8 2 0,016

MA UT 14-749.0292 19 8 2 0,016

2 M UT 14-746.0292 16 8 2 0,016

MA UT 14-750.0292 20 8 2 0,016

3 NC + 3 NO - M S 14-133.0252 27 6 2 0,017

MA S 14-273.0252 28 6 2 0,017

4 NC + 4 NO - M S 14-134.0252 29 6 2 0,019

MA S 14-274.0252 30 6 2 0,019

8/21/2019 BR_TD_EN_30

9/46


15708.2002


contacts : normally closed = NC, normally open = NO

switching action : maintained action = MA, momentary action = Mconnection method : soldering terminal = S, soldering-/plug-in terminal = -, universal terminal = UT

Keylock switches are supplied with 2 keys.


keylock switch 2 positions

0

switchingsystem

contacts

switchingaction

connectionmethod

key removable in

29 mm dia.


technicaldrawing

mountingdimensions

componentlayout

e

keylock switch 2 positions

position A: basic position

position C: momentary action

standard lock 1001,

other lock numbers on request

LL 1 NC + 1 NO M UT A 14-438.036K 43 10 1 1 0,030

2 NO M UT A 14-437.036K 42 10 1 1 0,030

SA 1 NC + 1 NO M S A 14-141.025K2 36 9 1 0,029

- A 14-141.022K 36 9 1 0,029

2 NC + 2 NO M S A 14-142.025K2 37 9 1 0,031

3 NC + 3 NO M S A 14-143.025K2 38 9 1 0,033

4 NC + 4 NO M S A 14-144.025K2 39 9 1 0,035


position C: maintained action

standard lock 1001,


LL 1 NC + 1 NO MA UT A 14-415.036K 41 10 1 1 0,030

A+C 14-412.036K 41 10 1 1 0,030

C 14-418.036K 41 10 1 1 0,030

2 NO MA UT A 14-414.036K 40 10 1 1 0,030

A+C 14-411.036K 40 10 1 1 0,030

C 14-417.036K 40 10 1 1 0,030

SA 1 NC + 1 NO MA S A 14-235.025K2 32 9 1 0,029

A+C 14-135.025K2 31 9 1 0,029

C 14-335.025K2 32 9 1 0,029

- A 14-235.022K 32 9 1 0,029

A+C 14-135.022K 32 9 1 0,029

C 14-335.022K 32 9 1 0,029

2 NC + 2 NO MA S A 14-236.025K2 33 9 1 0,031

A+C 14-136.025K2 33 9 1 0,031

C 14-336.025K2 33 9 1 0,031

3 NC + 3 NO MA S A 14-237.025K2 34 9 1 0,033

A+C 14-137.025K2 34 9 1 0,033

C 14-337.025K2 34 9 1 0,033

4 NC + 4 NO MA S A 14-238.025K2 35 9 1 0,035

A+C 14-138.025K2 35 9 1 0,035

C 14-338.025K2 35 9 1 0,035

maint.90

C

mom.42

C

A A

8/21/2019 BR_TD_EN_30

10/46


158

08.2002






selector switch 2 positions

0lever s

witchingsystem

contacts

switchingaction

connectionmethod

29 mm dia.


technicaldrawing

mountingdimensions

componentlayout

e

selector switch 2 positions


short, black LL 1 NC + 1 NO M UT 14-517.0360 54 12 1 1 0,025

MA UT 14-522.0360 57 12 1 1 0,025

2 NO M UT 14-515.0360 52 12 1 1 0,025

MA UT 14-520.0360 55 12 1 1 0,025

2 NC M UT 14-516.0360 53 12 1 1 0,025

MA UT 14-521.0360 56 12 1 1 0,025

SA 1 NC + 1 NO M S 14-501.02502 44 11 1 0,024

- 14-501.0220 44 11 1 0,024

MA S 14-506.02502 48 11 1 0,024

- 14-506.0220 48 11 1 0,024

2 NC + 2 NO M S 14-502.02502 45 11 1 0,026

MA S 14-507.02502 49 11 1 0,026

3 NC + 3 NO M S 14-503.02502 46 11 1 0,028

MA S 14-508.02502 50 11 1 0,028

4 NC + 4 NO M S 14-504.02502 47 11 1 0,030

MA S 14-509.02502 51 11 1 0,030

long, black LL 1 NC + 1 NO M UT 14-567.0360 54 14 3 1 0,025

MA UT 14-572.0360 57 14 3 1 0,025

2 NO M UT 14-565.0360 52 14 3 1 0,025

MA UT 14-570.0360 55 14 3 1 0,025

2 NC M UT 14-566.0360 53 14 3 1 0,025

MA UT 14-571.0360 56 14 3 1 0,025

SA 1 NC + 1 NO M S 14-551.02502 44 13 3 0,024

- 14-551.0220 44 13 3 0,024

MA S 14-556.02502 48 13 3 0,024

- 14-556.0220 48 13 3 0,024

2 NC + 2 NO M S 14-552.02502 45 13 3 0,026

MA S 14-557.02502 49 13 3 0,026

3 NC + 3 NO M S 14-553.02502 46 13 3 0,028

MA S 14-558.02502 50 13 3 0,028

4 NC + 4 NO M S 14-554.02502 47 13 3 0,030

MA S 14-559.02502 51 13 3 0,030

maint.90

C

mom.42

C

A A

8/21/2019 BR_TD_EN_30

11/46


15908.2002

connection method : soldering-/plug-in terminal = -

circuit drawings from page 183, technical drawings from page 175, mounting dimensions from page 181

buzzer IP65

operation voltage front cap connectionmethod

example for using

29 mm dia.


technicaldrawing

mountingdimensions

e

buzzer IP65 24 VDC plastic, black - Anw0427 14-810.002 58 15 1 0,016

brass chromium-plated - Anw0427 14-810.902 58 15 1 0,016

8/21/2019 BR_TD_EN_30

12/46

14Pushbuttons for Flush mounting

160

08.2002



dfront bezel-set for flush mounting page 167


dLED page 170


see marking 194


indicator for flush mounting

connectionmethod

35 mm dia.


technicaldrawing

mounting

dimensions

compone

ntlayout

e

indicator for flush mounting S 14-040.005 1 16 4 0,050

- 14-040.002 1 16 4 0,050

UT 14-041.006 1 16 4 1 0,050

8/21/2019 BR_TD_EN_30

13/46


16108.2002


dlens metal page 165


dlens raised, plastic page 165

dmarking cap for lens raised plastic/metal page 166



dLED page 170





see marking 194circuit drawings from page 183, technical drawings from page 175, mounting dimensions from page 181, component layouts from page 182

illuminated-/pushbutton for flush mounting

switchingsystem

contacts

diode(1N

4007)

switchingaction

connectionmethod

35 mm dia.


technicaldrawing

mountingdimensio

ns

componentlayout

e

illuminated-/pushbutton for flush mounting LL 1 NO - M UT 14-435.036 21 17 4 1 0,015

MA UT 14-475.036 26 17 4 1 0,015

1 NC - M UT 14-436.036 23 17 4 1 0,015

MA UT 14-476.036 28 17 4 1 0,015

1 NC + 1 NO - M UT 14-433.036 25 17 4 1 0,015

MA UT 14-473.036 30 17 4 1 0,015

2 NO - M UT 14-431.036 22 17 4 1 0,015

MA UT 14-471.036 27 17 4 1 0,015

2 NC - M UT 14-432.036 24 17 4 1 0,015

MA UT 14-472.036 29 17 4 1 0,015

SA 1 NC + 1 NO - M S 14-131.0252 5 17 4 0,013

- 14-131.022 5 17 4 0,013

MA S 14-271.0252 9 17 4 0,013

- 14-271.022 9 17 4 0,013

1 M UT 14-743.0292 13 18 4 1 0,014

MA UT 14-747.0292 17 18 4 1 0,014

2 M UT 14-744.0292 14 18 4 1 0,014

MA UT 14-748.0292 18 18 4 1 0,014

2 NC + 2 NO - M S 14-132.0252 6 17 4 0,015

MA S 14-272.0252 10 17 4 0,0151 M UT 14-745.0292 15 18 4 1 0,016

MA UT 14-749.0292 19 18 4 1 0,016

2 M UT 14-746.0292 16 18 4 1 0,016

MA UT 14-750.0292 20 18 4 1 0,016

3 NC + 3 NO - M S 14-133.0252 7 17 4 0,017

MA S 14-273.0252 11 17 4 0,017

4 NC + 4 NO - M S 14-134.0252 8 17 4 0,019

MA S 14-274.0252 12 17 4 0,019

8/21/2019 BR_TD_EN_30

14/46


162

08.2002


danti-twisting ring page 170



switching action : maintained action = MA, momentary action = M



keylock switch 2 positions for flush mounting

0

switchingsystem

contacts

switchingaction

connectionmethod

key removable in

35 mm dia.


technicaldrawing

mountingdimensions

componentlayout

e

keylock switch 2 positionsfor flush

mounting


position C: momentary action

standard lock 1001,


LL 1 NC + 1 NO M UT A 14-438.036K 43 19 4 1 0,030

2 NO M UT A 14-437.036K 42 19 4 1 0,030

SA 1 NC + 1 NO M S A 14-141.025K2 36 19 4 0,029

- A 14-141.022K 36 19 4 0,029

2 NC + 2 NO M S A 14-142.025K2 37 19 4 0,031

3 NC + 3 NO M S A 14-143.025K2 38 19 4 0,033

4 NC + 4 NO M S A 14-144.025K2 39 19 4 0,035


position C: maintained action

standard lock 1001,


LL 1 NC + 1 NO MA UT A 14-415.036K 41 19 4 1 0,030

A+C 14-412.036K 41 19 4 1 0,030

C 14-418.036K 41 19 4 1 0,030

2 NO MA UT A 14-414.036K 40 19 4 1 0,030

A+C 14-411.036K 40 19 4 1 0,030

C 14-417.036K 40 19 4 1 0,030

SA 1 NC + 1 NO MA S A 14-235.025K2 32 19 4 0,029

A+C 14-135.025K2 32 19 4 0,029

C 14-335.025K2 32 19 4 0,029

- A 14-235.022K 32 19 4 0,029

A+C 14-135.022K 32 19 4 0,029

C 14-335.022K 32 19 4 0,029

2 NC + 2 NO MA S A 14-236.025K2 33 19 4 0,031

A+C 14-136.025K2 33 19 4 0,031

C 14-336.025K2 33 19 4 0,031

3 NC + 3 NO MA S A 14-237.025K2 34 19 4 0,033

A+C 14-137.025K2 34 19 4 0,033

C 14-337.025K2 34 19 4 0,033

4 NC + 4 NO MA S A 14-238.025K2 35 19 4 0,035

A+C 14-138.025K2 35 19 4 0,035

C 14-338.025K2 35 19 4 0,035

maint.90

C

mom.42

C

A A

8/21/2019 BR_TD_EN_30

15/46


16308.2002


danti-twisting ring page 170






selector switch 2 positions for flush mounting

0lever s

witchingsystem

contacts

switchingaction

connectionmethod

35 mm dia.


technicaldrawing

mountingdimensions

componentlayout

e

selector switch 2 positionsfor flush

mounting


short, black LL 1 NC + 1 NO M UT 14-517.0360 54 20 4 1 0,025

MA UT 14-522.0360 57 20 4 1 0,025

2 NO M UT 14-515.0360 52 20 4 1 0,025

MA UT 14-520.0360 55 20 4 1 0,025

2 NC M UT 14-516.0360 53 20 4 1 0,025

MA UT 14-521.0360 56 20 4 1 0,025

SA 1 NC + 1 NO M S 14-501.02502 44 20 4 0,024

- 14-501.0220 44 20 4 0,024

MA S 14-506.02502 48 20 4 0,024

- 14-506.0220 48 20 4 0,024

2 NC + 2 NO M S 14-502.02502 45 20 4 0,026

MA S 14-507.02502 49 20 4 0,026

3 NC + 3 NO M S 14-503.02502 46 20 4 0,028

MA S 14-508.02502 50 20 4 0,028

4 NC + 4 NO M S 14-504.02502 47 20 4 0,030

MA S 14-509.02502 51 20 4 0,030

maint.90

C

mom.42

C

A A

8/21/2019 BR_TD_EN_30

16/46


164

08.2002

connection method : soldering-/plug-in terminal = -

circuit drawings from page 183, technical drawings from page 175, mounting dimensions from page 181

buzzer for flush mounting IP40

operation voltage front cap connectionmethod

35 mm dia.


technicaldrawing

mountingdimensions

e

buzzer for flush mounting IP40 24 VDC plastic, black - 14-810.910 58 21 4 0,016

brass chromium-plated - 14-810.918 58 21 4 0,016

8/21/2019 BR_TD_EN_30

17/46

16501.2002

14accessories

for version IP 67 use marking cap 704.609.9





at front

lens plastic

shape lens colour

29 mm dia.

Typ-Nr. e

lens plastic flat opaque black 704.602.0 0,001

transparent blue 704.602.6 0,001

colourless, clear 704.602.7 0,001

yellow 704.602.4 0,001

green 704.602.5 0,001

red 704.602.2 0,001

lens raised, plastic

shape lens colour

29 mm dia.

Typ-Nr. e

lens raised, plastic flat transparent colourless, clear 704.611.7 0,002

yellow 704.611.4 0,002green 704.611.5 0,002

red 704.611.2 0,002

lens metal with window

shape lens colour

29 mm dia.

Typ-Nr. e

lens metal with window flat aluminium anodized natural 704.601.81 0,001

black 704.601.01 0,001

stainless steel natural 704.601.91 0,001

lens metal

shape lens colour

29 mm dia.

Typ-Nr. e

lens metal flat aluminium anodized blue 704.601.6 0,001

yellow 704.601.4 0,001

green 704.601.5 0,001

natural 704.601.8 0,001

red 704.601.2 0,001

black 704.601.0 0,001


lens cap for indiactor full face illumination

lens cap colour

29 mm dia.

Typ-Nr. e

lens cap for indiactor full face illumination transparent blue 704.603.6 0,003


yellow 704.603.4 0,003

green 704.603.5 0,003

red 704.603.2 0,003

8/21/2019 BR_TD_EN_30

18/46

166

01.2002

14accessories



mushroom-head cap

mushroom colour

40 mm dia.

Typ-Nr. e

mushroom-head cap opaque yellow 704.604.4 0,001

green 704-604.5 0,001

red 704.604.2 0,001black 704.604.0 0,001

mushroom-head cap illuminated

mushroom colour

40 mm dia.

Typ-Nr. e

mushroom-head cap illuminated transparent blue 704.614.6 0,007

yellow 704.614.4 0,007

green 704.614.5 0,007

clear 704.614.7 0,007

red 704.614.2 0,007

marking foil for lens plastic/metal

front shape marking plate colour part no. e

marking foil for lens plastic/

metal

round opaque black 704.609.0 0,001

translucent white 704.609.9 0,001

translucent, ribbed, for neon

lamps


marking plate for mushroom-head cap

front shape marking plate colour part no. e

marking plate for mushroom-head cap round translucent white 704.609.9 0,001

marking cap for lens raised plastic/metal

front shape marking cap colour part no. e

marking cap for lens raised

plastic/metal

round translucent, ribbed white 704.610.9 0,001

transparent, ribbed, for neon

lamps


marking cap for lens cap for indicator full face illumination

front shape marking cap colour part no. e

marking cap for lens cap forindicator full face

illumination

round translucent, ribbed white 704.608.9 0,002transparent, ribbed, for neon

lamps


8/21/2019 BR_TD_EN_30

19/46

16701.2002

14accessories

mounting dimensions from page 181

technical drawings from page 175

front ring

material colour

29 mm dia.

Typ-Nr. e

front ring aluminium anodized natural 704.600.1 0,005

black 704.600.1A 0,005


plastic light grey 704.600.6 0,003black 704.600.0 0,003

chromium-plated 704.600.4 0,003

front bezel-set for flush mounting

material colour

35 mm dia.

Typ-Nr. mountingdimensions

e

front bezel-set for flush mounting aluminium anodized natural 704.955.1 4 0,029

black 704.955.0 4 0,029

stainless steel natural 704.955.9 4 0,029

front bezel-set for mushroom-head button

material colour

50 mm dia.

Typ-Nr. e

front bezel-set for mushroom-head button aluminium anodized natural 14-958.8 0,042

black 14-958.0 0,042

legend plate

use front dimension part no. e

legend plate

adhesive, aluminium anodized,

natural,

can also be engraved

for pushbuttons for standard

mounting

30 x 42 mm for 22.5 mm dia.

mounting hole

704.962.0 0,002


mounting hole

704.962.5 0,003


mounting hole

704.962.7 0,004

for pushbuttons for flush moun-

ting


mounting hole

704.962.6 0,004

protective cover

use

29 mm dia.

Typ-Nr. technicaldrawing

e

protective cover

hinged, transparent, with means for sealing

for pushbuttons 704.925.0 22 0,007

for pushbutton, selector switch short lever 704.925.2 22 0,007

for pushbutton, selector switch long lever 704.925.3 22 0,007

8/21/2019 BR_TD_EN_30

20/46

168

01.2002

14accessories


protective cover for flush mounting

use

35 mm dia.

Typ-Nr. eprotective cover for flush mounting

hinged, transparent, with means for sealing

aluminium anodized

for pushbuttons 704.928.18 0,020

for pushbutton, selector switch short lever 704.928.38 0,020

for pushbutton, selector switch long lever 704.928.28 0,020

protective front ring

front ring part no. e

protective front ring

with transparent silicone membrane (to resist sea water)

temperature resistance: -25C bis + 85C

brass, nickel plated 704.600.2 0,005

with transparent silicone membrane

temperature resistance: -25C bis + 85C

aluminium anodized 704.600.3 0,005

protective front ring for flush mounting

front ring part no. e

protective front ring for flush mounting

with transparent silicone membrane

aluminium anodized, natural 704.955.3 0,016

aluminium anodized, black 704.955.4 0,016

blind plug

colour

28 mm dia.

Typ-Nr. mountingdimens

ions

e

blind plug black 704.960.7 1 0,004

spare key

part no. e

spare key

for standard lock 1001, else on request

14-987.1001 0,006

8/21/2019 BR_TD_EN_30

21/46

16901.2002

14accessories

component layouts from page 182

at back

PCB plug-in base

for pin orientation part no. componen

tlayout

e

PCB plug-in base

17.9 x 8.4 mm high

With the extendable mounting the di-

stance between PCB plug-in base and

PCB can be varied up to 3&bnsp;mm.

low level switching element right-angled 31-941 3 0,004

16.4 mm dia. x 9.8 mm high low level switching element axial 31-940 2 0,002

17.8 mm dia. x 9.8 mm high snap-action switching element 2.8 mm axial 31-942 4 0,002

cable shoe

connection method part no. e

cable shoe plug-in terminal 2.8 x 0.5 mm 31-946 0,001

universal terminal 2.0 x 0.5 mm 31-945 0,001

insulation socket

part no. e

insulation socket

for snap-action switching element 2.8 mm

to cover the plug-in terminals

01-928 0,001

for connector 31-945 31-928 0,001for connector 31-946 31-929 0,001

terminal cover

part no. e

terminal cover

for snap-action switching element

01-929 0,010

for illumination

Filament lamp

voltage/current part no. e

Filament lamp

base T 5.5

6 VAC/VDC/200 mA 10-1106.1369 (01-903.0) 0,001

12 VAC/VDC/100 mA 10-1109.1329 (01-903.1) 0,001

12 VAC/VDC/50 mA 10-1109.1279 (01-913.12) 0,001

24 VAC/VDC/25 mA 10-1112.1199 (01-913.24) 0,001

24 VAC/VDC/50 mA 10-1112.1279 (01-903.2) 0,001

28 VAC/VDC/40 mA 10-1113.1249 (01-903.28) 0,001

30 VAC/VDC/40 mA 10-1114.1249 (01-903.3) 0,001

36 VAC/VDC/35 mA 10-1116.1229 (01-903.4) 0,001

48 VAC/VDC/25 mA 10-1119.1199 (01-903.5) 0,001

8/21/2019 BR_TD_EN_30

22/46

170

01.2002

14accessories

for lamp voltage reduction

Please keep to the country specific security rules.


LED

number of chips voltage/current colour part no. e

LED

base T 5.5

Note:For optimal illuminati-

on we strongly recom-

mend using our new

single-chip LEDs.

For new designs, only

the new single-chip

LEDs should be cho-

sen. They can be found

on page 669.

1 chip 12 VDC/14 mA white 10-2109.3139 0,001

24 VDC/14 mA white 10-2112.3139 0,001

28 VDC/14 mA white 10-2113.3139 0,001

6 chips 6 VDC/45 mA yellow 10-5106.3254 0,001

green 10-5106.3255 0,001red 10-5106.3252 0,001

12 VDC/30 mA yellow 10-5109.3204 0,001

green 10-5109.3205 0,001

red 10-5109.3202 0,001

24 VDC/15 mA yellow 10-5112.3144 0,001

green 10-5112.3145 0,001

red 10-5112.3142 0,001

28 VDC/15 mA yellow 10-5113.3144 0,001

green 10-5113.3145 0,001

red 10-5113.3142 0,001

48 VDC/14 mA yellow 10-5119.3134 0,001

green 10-5119.3135 0,001

red 10-5119.3132 0,001

capacitor

value part no. e

capacitor

use with 60 VAC/20 mA, 50 Hz lamp voltage

230 VAC/0.27 F 02-917.0 0,004

assembling

positioning insert

part no. mountingdimensions

e

positioning insert 14-910 1 0,001

anti-twisting ring

part no. e

anti-twisting ring

for flush mounting

704.954.0 0,002

reducing ring

colour part no. e

reducing ring

for mounting of pushbutton 22.5 mm dia. in mounting hole 30.5 mm dia.

natural anodized 704.960.8 0,004

black anodized 704.960.0 0,004

8/21/2019 BR_TD_EN_30

23/46

17101.2002

14accessories

lens remover

part no. e

lens remover

for pushbuttons for flush mounting

700.006.0 0,003

lamp remover

part no. e

lamp remover

CAUTION

A switching process might be released when replacing the lamp!

02-906 0,002

LED remover

part no. e

LED remover

CAUTIONA switching process might be released when replacing the LED!

51-996 0,024

8/21/2019 BR_TD_EN_30

24/46

172

01.2002

14technical data

switching system

switching system

self-cleaning, double-break, snap action switching system. (with

contact gap 2 x 0.5 mm).1 normally closed or 1 normally open contact per element.

snap-action switching elements with soldering terminals at the si-

des: up to 4 switching element can be on a pushbutton (max. 4 nor-

mally closed and 4 normally open contacts).

snap-action switching element with axial plug-in terminals 2.8 mm

stackable, only 1 switching element can be on a pushbutton.

material

material of contacts

gold-plated silver

switching element

plug-in-/soldering terminal

diallylphthalate DAP, polyamide 66, polysulfone, heat-resistant andself-extinguishing

soldering terminal: PA 6.6 Ultramid

actuator case

polyamide

mechanical characteristics

connection method

snap-action switching element with tinned soldering terminals at

the sides:

max. wire diameter: 2 wires 1.2 mm

max. wire cross-section of stranded cable: 1x 1 mm&.

snap-action switching element with axial plug-in terminals, whichcan also be used as soldering terminals:

plug-in terminal: 2.8 x 0.5 mm

soldering terminal:

max. wire diameter: 2 wires of 1 mm

max. wire cross-section of stranded cable: 2 x 0.75 mm& or 1 x 1.0

mm&

actuating torque

measured at the key or lever of the keylock- or selector switch: 2.5-

5.5 Ncm

actuating force

3.5-5.5 N, depending on the number of switching elements

actuating travel0

0

resistance to climate

standard condition as per IEC 68-2-3 and 2-30

changing condition as per IEC 68-2-14 and 2-33

storage temperature-40C to + 85C

(as per DIN IEC 68-)

mechanical life

momentary action 2 million cycles of operation

maintained action 1 million cycles of operation

rebound time

8/21/2019 BR_TD_EN_30

25/46

17301.2002

14technical data

approvals

approvals

- CSA 300 VAC

- UL

- German Lloyd

- German Navy

- CB

- ENEC- CE (declaration of conformity)

switching system

switching system

This low level switching element was designed for switching low

powers in electronic circuits. The mechanism assures reliable swit-

ching of loads ranging from a few A/V up to 100 mA/42 VAC/

VDC.

Single-break momentary contact, as normally open or normally clo-

sed with 4 independent points of contact. 2 momentary contacts per

switching element; combination of normally open and normally clo-

sed is possible.

Special features are the long life, extremely short rebound time and

stable contact resistance.

material

material of contacts

gold-plated

switching element

polysulfone, heat-resistant and self-extinguishing

actuator case

polyamide

mechanical characteristics

connection method

The universal terminals permit these units to be mounted on printed

circuit boards (PCB). These terminals can also be used as solde-

ring or plug-in terminals.

For these terminals we can also supply a plug-in base which, when

soldered on to the board, enables the switch to be plugged in.

soldering terminal:

max. wire diameter: 2 wires of 1 mm

max. wire cross-section of stranded cable: 2 x 0.75 mm&

plug-in terminal: 2.0 x 0.5 mm

actuating torque

measured at the key or lever of the keylock- or selector switch: 2.5-5.5 Ncm

actuating force

3-4 N

actuating travel0

storage temperature

-40C to + 85C


mechanical life

momentary action 5 million cycles of operation

maintained action 1 million cycles of operation

rebound time

type. < 100 s

resistance to shock

(single impacts, semi-sinusoidal)

15 g for 11 ms as per IEC 512-4-3, IEC 68-2-27

degree of protection

front as per IEC 529: IP 67

ambient air temperature

-25C to + 55C

for indicators and illuminated pushbuttons mounted as a block ,

make sure the heat can escape freely


electrical characteristics

contact resistance

starting value (initial)

8/21/2019 BR_TD_EN_30

26/46

174

01.2002

14technical data

ambient air temperature

-25C to + 50C


electrical characteristics

frequency (tone)ca. 2.8 kHz continuous tone only

sound pressure

95 db (A) 8 at a distance of 0.1 m

operation voltage/current0

operation voltage: t24 VDC 10%

operation current:

8/21/2019 BR_TD_EN_30

27/46

14drawings

17501.2002

1 indicator front illumination, indicator full face illumination

page 153, 153,

2 indicator full face illumination

page 153

3 illuminated-/pushbutton

page 154

technical drawings

8/21/2019 BR_TD_EN_30

28/46

14drawings

176

01.2002


page 154


page 154

6 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap

page 155, 156

8/21/2019 BR_TD_EN_30

29/46

14drawings

17701.2002


page 155, 156

8 illuminated pushbutton with mushroom-head cap

page 156

9 keylock switch 2 positions

page 157

8/21/2019 BR_TD_EN_30

30/46

14drawings

178

01.2002


page 157

11 selector switch 2 positions

page 158


page 158

8/21/2019 BR_TD_EN_30

31/46

14drawings

17901.2002


page 158


page 158

15 buzzer IP65

page 159

16 indicator for flush mounting

page 160

8/21/2019 BR_TD_EN_30

32/46

14drawings

180

01.2002

17 illuminated-/pushbutton for flush mounting

page 161

18 illuminated-/pushbutton for flush mounting

page 161

19 keylock switch 2 positions for flush mounting

page 162

20 selector switch 2 positions for flush mounting

page 163

8/21/2019 BR_TD_EN_30

33/46

14drawings

18101.2002

21 buzzer for flush mounting IP40

page 164

22 protective cover

page 167

1 indicator front illumination, indicator full face illumination, illuminated-/pushbutton, keylock switch 2 positions, selector switch

2 positions, buzzer IP65, blind plug, positioning insert

page 153, 153, 154, 157, 158, 159, 168, 170


page 155, 156

mounting dimensions

8/21/2019 BR_TD_EN_30

34/46

14drawings

182

01.2002


page 158

4 indicator for flush mounting, illuminated-/pushbutton for flush mounting, keylock switch 2 positions for flush mounting, selector

switch 2 positions for flush mounting, buzzer for flush mounting IP40, front bezel-set for flush mounting

page 160, 161, 162, 163, 164, 167

1 indicator front illumination, indicator full face illumination, illuminated-/pushbutton, pushbutton with mushroom-head cap, illuminated

pushbutton with mushroom-head cap, keylock switch 2 positions, selector switch 2 positions, indicator for flush mounting, illuminated-

/pushbutton for flush mounting, keylock switch 2 positions for flush mounting, selector switch 2 positions for flush mounting

page 153, 153, 154, 155, 156, 157, 158, 160, 161, 162, 163

2 PCB plug-in basepage 169

component layouts

8/21/2019 BR_TD_EN_30

35/46

14drawings

18301.2002

3 PCB plug-in base

page 169

4 PCB plug-in base

page 169

1 indicator front illumination, indicator full face illumination, indicator for flush mounting

page 153, 153, 160

2 indicator front illumination, indicator full face illumination

page 153, 153


page 153


page 153

circuit drawings

8/21/2019 BR_TD_EN_30

36/46

14drawings

184

01.2002

5 illuminated-/pushbutton, pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap, illuminated-/push-

button for flush mounting

page 154, 155, 156, 161



page 154, 155, 156, 161



page 154, 155, 156, 161



page 154, 155, 156, 161



page 154, 155, 156, 161



page 154, 155, 156, 161

8/21/2019 BR_TD_EN_30

37/46

14drawings

18501.2002



page 154, 155, 156, 161



page 154, 155, 156, 161

13 illuminated-/pushbutton, illuminated pushbutton with mushroom-head cap, illuminated-/pushbutton for flush mounting

page 154, 156, 161


page 154, 156, 161


page 154, 156, 161


page 154, 156, 161

8/21/2019 BR_TD_EN_30

38/46

14drawings

186

01.2002


page 154, 156, 161


page 154, 156, 161


page 154, 156, 161


page 154, 156, 161



page 154, 155, 156, 161



page 154, 155, 156, 161

8/21/2019 BR_TD_EN_30

39/46

14drawings

18701.2002



page 154, 155, 156, 161



page 154, 155, 156, 161

25 illuminated-/pushbutton, pushbutton with mushroom-head cap, illuminated-/pushbutton for flush mounting

page 154, 155, 161



page 154, 155, 156, 161



page 154, 155, 156, 161



page 154, 155, 156, 161

8/21/2019 BR_TD_EN_30

40/46

14drawings

188

01.2002



page 154, 155, 156, 161



page 154, 155, 156, 161


page 157

32 keylock switch 2 positions, keylock switch 2 positions for flush mounting

page 157, 162


page 157, 162


page 157, 162


page 157, 162

8/21/2019 BR_TD_EN_30

41/46

14drawings

18901.2002


page 157, 162


page 157, 162


page 157, 162


page 157, 162


page 157, 162


page 157, 162


page 157, 162

8/21/2019 BR_TD_EN_30

42/46

14drawings

190

01.2002


page 157, 162

44 selector switch 2 positions, selector switch 2 positions for flush mounting

page 158, 163


page 158, 163


page 158, 163

47 selector switch 2 positions, selector switch 2 positions for flush mountingpage 158, 163


page 158, 163


page 158, 163

8/21/2019 BR_TD_EN_30

43/46

14drawings

19101.2002


page 158, 163


page 158, 163


page 158, 163


page 158, 163

54 selector switch 2 positions, selector switch 2 positions for flush mountingpage 158, 163


page 158, 163


page 158, 163

8/21/2019 BR_TD_EN_30

44/46

14drawings

192

01.2002


page 158, 163

58 buzzer IP65, buzzer for flush mounting IP40

page 159, 164

8/21/2019 BR_TD_EN_30

45/46

Typical Applications 14

19301.2002

With indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply

with a considerable saving of space.

8/21/2019 BR_TD_EN_30

46/46

Marking 14

Indicator - Engraving of marking cap

All marking plates and marking caps are engraved in lettering to

DIN 1451, with black or white filling.

Can also be supplied with standard lettering or symbols.

For symbols see series 04.

Lettering to be engraved should be specified on a separate order

sheet.

(available from us on request.)

Height of lettersmm

Number of lines Number of letters per line approx. Line spacing mm

b1 b2 b3

3 3 9 9 7 4,6

4 2 7 6 - 6,6

8 1 3 - - -

Pushbutton/Illuminated pushbuttons - Engraving of marking

plate or raised marking cap

All marking plates and marking caps are engraved in lettering to

DIN 1451, with black or white filling.

Can also be supplied with standard lettering or symbols.

Lettering to be engraved should be specified on a separate order

sheet.


Height of lettersmm


b1 b2 b3

3 3 11 10 9 4,6

4 2 8 7 - 6,6

8 1 4 - - -

Engraving of labels

All labels are engraved in lettering to DIN 1451, with black filling.

Lettering to be engraved should be specified on a separate ordersheet.


Height of lettersmm


L = 30 mm L = 42 mm

3 2 14 20 4,5

4 1 10 14 4

Documents

BR_TD_EN_30