7/30/2019 MaterialData_78247
1/2
Overview of materials for Low Density Polyethylene (LDPE),
Molded
Categories: Polymer; Thermoplastic; Polyethylene; LDPE; Low
Density Polyethylene (LDPE), Molded
Material
Notes:
This property data is a summary of similar materials in the
MatWeb database for the category "Low Density Polyethylene (LDPE),
Molded". Each property
range of values reported is minimum and maximum values of
appropriate MatWeb entries. The comments report the average value,
and number of data points
used to calculate the average. The values are not necessarily
typical of any specific grade, especially less common values and
those that can be most affecte
by additives or processing methods.
Vendors: Click here to view all available suppliers for this
material.
Please click here if you are a supplier and would like
information on how to add your listing to this material.
Physical Properties Metric English Commen
Density 0.910 - 0.980 g/cc 0.0329 - 0.0354 lb/in Average value:
0.921 g/cc Grade Count:1
Water Absorption 0.0100 % 0.0100 % Average value: 0.0100 % Grade
Count:
Moisture Absorption at Equilibrium 0.0100 % 0.0100 % Average
value: 0.0100 % Grade Count:
Particle Size 5.00 - 50.0 m 5.00 - 50.0 m Average value: 27.5 m
Grade Coun
Particle Mesh Size 16.0 - 50.0 Mesh 16.0 - 50.0 Mesh Average
value: 39.3 Mesh Grade Coun
Water Vapor Transmission 15.5 - 18.6 g/m/day 0.998 - 1.20 g/100
in/day Average value: 17.4 g/m/day Grade Coun
Oxygen Transmission 197 - 200 cc-mm/m-24hr-atm 500 - 508
cc-mil/100 in-24hr-atm Average value: 199 cc-mm/m-24hr-atm Grade
Coun
Viscosity 21000 - 305000 cP@Temperature 190 - 190 C
21000 - 305000 cP@Temperature 374 - 374 F
Average value: 91600 cP Grade Coun
21000 - 305000 cP@Shear Rate 300 - 5000 1/s
21000 - 305000 cP@Shear Rate 300 - 5000 1/s
Average value: 91600 cP Grade Coun
Environmental S tress Crack
Resistance
1.00 - 1500 hour 1.00 - 1500 hour Average value: 313 hour Grade
Coun
1.00 - 1.00 hour@Temperature 50.0 - 50.0 C
1.00 - 1.00 hour@Temperature 122 - 122 F
Average value: 1.00 hour Grade Coun
1.00 - 1.00 hour@Thickness 2.00 - 2.00 mm
1.00 - 1.00 hour@Thickness 0.0787 - 0.0787 in
Average value: 1.00 hour Grade Coun
Maximum Moisture Content 0.100 0.100 Average value: 0.100 Grade
Coun
Thickness 5.00 - 38.0 microns 0.197 - 1.50 mil Average value:
25.9 microns Grade Count:
Linear Mold Shrinkage 0.0100 - 0.0500 cm/cm 0.0100 - 0.0500
in/in Average value: 0.0205 cm/cm Grade Coun
Melt Flow 0.200 - 2300 g/10 min 0.200 - 2300 g/10 min Average
value: 37.5 g/10 min Grade Count:1
Base Resin Melt Index 0.500 - 25.0 g/10 min 0.500 - 25.0 g/10
min Average value: 6.32 g/10 min Grade Coun
Coating Weight 4.80 - 9.60 g/m 3.00 - 6.00 lb/ream Average
value: 6.40 g/m Grade Coun
Mechanical Properties Metric English Commen
Hardness, Shore A 82.0 - 97.0 82.0 - 97.0 Average value: 91.6
Grade Count:
Hardness, Shore D 38.0 - 60.0 38.0 - 60.0 Average value: 49.0
Grade Count:
Tensile Strength, Ultimate 2.80 - 56.5 MPa 406 - 8200 psi
Average value: 10.9 MPa Grade Count:1
Film Tensile Strength at Yield, MD 12.0 - 30.0 MPa 1740 - 4350
psi Average value: 24.2 MPa Grade CounFilm Tensile Strength at
Yield, TD 9.00 - 11.0 MPa 1310 - 1600 psi Average value: 9.81 MPa
Grade Coun
Film Elongation at Break, MD 200 - 650 % 200 - 650 % Average
value: 354 % Grade Count:
Film Elongation at Break, TD 550 - 930 % 550 - 930 % Average
value: 741 % Grade Count:
Tensile Strength, Yield 7.70 - 136 MPa 1120 - 19700 psi Average
value: 12.0 MPa Grade Count:1
Elongation at Break 13.5 - 800 % 13.5 - 800 % Average value: 312
% Grade Count:1
Elongation at Yield 13.0 - 400 % 13.0 - 400 % Average value:
28.3 % Grade Count:
Modulus of Elasticity 0.110 - 0.449 GPa 16.0 - 65.1 ksi Average
value: 0.239 GPa Grade Count:
Flexural Modulus 0.0248 - 1.38 GPa 3.60 - 200 ksi Average value:
0.239 GPa Grade Count:
Flexural Yield Strength 9.03 - 48.3 MPa 1310 - 7000 psi Average
value: 17.4 MPa Grade Coun
Secant Modulus 0.121 - 1.45 GPa 17.5 - 210 ksi Average value:
0.257 GPa Grade Count:
Secant Modulus, MD 0.138 - 0.234 GPa 20.0 - 33.9 ksi Average
value: 0.182 GPa Grade Count:
Secant Modulus, TD 0.152 - 0.276 GPa 22.0 - 40.0 ksi Average
value: 0.218 GPa Grade Count:
Izod Impact, Notched, Low Temp (ISO) 24.0 - 69.4 kJ/m 11.4 -
33.0 ft-lb/in Average value: 40.5 kJ/m Grade Count:
Charpy Impact Unnotched >= 30.0 J/cm
@Temperature -40.0 - -20.0 C
>= 143 ft-lb/in
@Temperature -40.0 - -4.00 F
Average value: 30.0 J/cm Grade Coun
Tensile Impact Strength 94.5 - 315 kJ/m 45.0 - 150 ft-lb/in
Average value: 221 kJ/m Grade Coun
Coefficient of Friction 0.120 - 0.700 0.120 - 0.700 Average
value: 0.357 Grade Coun
Elmendorf Tear Strength, MD 8.00 - 18.2 g/micron 203 - 463 g/mil
Average value: 12.4 g/micron Grade Coun
Elmendorf TearStrength,TD 1.84 - 45.8 g/micron 46.7 - 1160 g/mil
Average value: 14.4 g/micron Grade Coun
Dart Drop 2.36 - 30.0 g/micron 59.9 - 762 g/mil Average value:
5.87 g/micron Grade Count:
Dart Drop Test 90.0 - 126 g 0.198 - 0.278 lb Average value: 106
g Grade Coun
Film Tensile Strength at Break, MD 20.0 - 59.0 MPa 2900 - 8560
psi Average value: 30.1 MPa Grade Count:
Film Tensile Strength at Break, TD 15.2 - 45.0 MPa 2200 - 6530
psi Average value: 22.8 MPa Grade Count:
Izod Impact, Notched 0.427 - 5340 J/cm 0.800 - 10000 ft-lb/in
Average value: 3.05 J/cm Grade Count:
MatWeb, Your Source for Materials Information - WWW.MATWEB.COM /
Page 1 /
http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=10http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=12http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=15http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=870http://www.matweb.com/search/GetVendors.aspx?matguid=557b96c10e0843dbb1e830ceedeb35b0http://www.matweb.com/services/advertising.aspxhttp://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=10000http://www.matweb.com/tools/unitconverter.aspx?fromID=37&fromValue=0.800http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=5340http://www.matweb.com/tools/unitconverter.aspx?fromID=62&fromValue=0.427http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=6530http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=2200http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=45.0http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=15.2http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=8560http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=2900http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=59.0http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=20.0http://www.matweb.com/tools/unitconverter.aspx?fromID=83&fromValue=0.278http://www.matweb.com/tools/unitconverter.aspx?fromID=83&fromValue=0.198http://www.matweb.com/tools/unitconverter.aspx?fromID=40&fromValue=126http://www.matweb.com/tools/unitconverter.aspx?fromID=40&fromValue=90.0http://www.matweb.com/tools/unitconverter.aspx?fromID=172&fromValue=762http://www.matweb.com/tools/unitconverter.aspx?fromID=172&fromValue=59.9http://www.matweb.com/tools/unitconverter.aspx?fromID=218&fromValue=30.0http://www.matweb.com/tools/unitconverter.aspx?fromID=218&fromValue=2.36http://www.matweb.com/tools/unitconverter.aspx?fromID=172&fromValue=1160http://www.matweb.com/tools/unitconverter.aspx?fromID=172&fromValue=46.7http://www.matweb.com/tools/unitconverter.aspx?fromID=218&fromValue=45.8http://www.matweb.com/tools/unitconverter.aspx?fromID=218&fromValue=1.84http://www.matweb.com/tools/unitconverter.aspx?fromID=172&fromValue=463http://www.matweb.com/tools/unitconverter.aspx?fromID=172&fromValue=203http://www.matweb.com/tools/unitconverter.aspx?fromID=218&fromValue=18.2http://www.matweb.com/tools/unitconverter.aspx?fromID=218&fromValue=8.00http://www.matweb.com/tools/unitconverter.aspx?fromID=38&fromValue=150http://www.matweb.com/tools/unitconverter.aspx?fromID=38&fromValue=45.0http://www.matweb.com/tools/unitconverter.aspx?fromID=75&fromValue=315http://www.matweb.com/tools/unitconverter.aspx?fromID=75&fromValue=94.5http://www.matweb.com/tools/unitconverter.aspx?fromID=38&fromValue=143http://www.matweb.com/tools/unitconverter.aspx?fromID=63&fromValue=30.0http://www.matweb.com/tools/unitconverter.aspx?fromID=38&fromValue=33.0http://www.matweb.com/tools/unitconverter.aspx?fromID=38&fromValue=11.4http://www.matweb.com/tools/unitconverter.aspx?fromID=75&fromValue=69.4http://www.matweb.com/tools/unitconverter.aspx?fromID=75&fromValue=24.0http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=40.0http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=22.0http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.276http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.152http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=33.9http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=20.0http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.234http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.138http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=210http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=17.5http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=1.45http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.121http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=7000http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=1310http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=48.3http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=9.03http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=200http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=3.60http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=1.38http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.0248http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=65.1http://www.matweb.com/tools/unitconverter.aspx?fromID=78&fromValue=16.0http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.449http://www.matweb.com/tools/unitconverter.aspx?fromID=45&fromValue=0.110http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=19700http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=1120http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=136http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=7.70http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=1600http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=1310http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=11.0http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=9.00http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=4350http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=1740http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=30.0http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=12.0http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=8200http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=406http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=56.5http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=2.80http://www.matweb.com/tools/unitconverter.aspx?fromID=248&fromValue=6.00http://www.matweb.com/tools/unitconverter.aspx?fromID=248&fromValue=3.00http://www.matweb.com/tools/unitconverter.aspx?fromID=247&fromValue=9.60http://www.matweb.com/tools/unitconverter.aspx?fromID=247&fromValue=4.80http://www.matweb.com/tools/unitconverter.aspx?fromID=149&fromValue=25.0http://www.matweb.com/tools/unitconverter.aspx?fromID=149&fromValue=0.500http://www.matweb.com/tools/unitconverter.aspx?fromID=149&fromValue=25.0http://www.matweb.com/tools/unitconverter.aspx?fromID=149&fromValue=0.500http://www.matweb.com/tools/unitconverter.aspx?fromID=149&fromValue=2300http://www.matweb.com/tools/unitconverter.aspx?fromID=149&fromValue=0.200http://www.matweb.com/tools/unitconverter.aspx?fromID=149&fromValue=2300http://www.matweb.com/tools/unitconverter.aspx?fromID=149&fromValue=0.200http://www.matweb.com/tools/unitconverter.aspx?fromID=140&fromValue=0.0500http://www.matweb.com/tools/unitconverter.aspx?fromID=140&fromValue=0.0100http://www.matweb.com/tools/unitconverter.aspx?fromID=148&fromValue=0.0500http://www.matweb.com/tools/unitconverter.aspx?fromID=148&fromValue=0.0100http://www.matweb.com/tools/unitconverter.aspx?fromID=101&fromValue=1.50http://www.matweb.com/tools/unitconverter.aspx?fromID=101&fromValue=0.197http://www.matweb.com/tools/unitconverter.aspx?fromID=100&fromValue=38.0http://www.matweb.com/tools/unitconverter.aspx?fromID=100&fromValue=5.00http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/search/GraphConditionalData.aspx?matguid=557b96c10e0843dbb1e830ceedeb35b0&propid=267&sigid=15http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1500http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1500http://www.matweb.com/tools/unitconverter.aspx?fromID=50&fromValue=1.00http://www.matweb.com/tools/unitconverter.aspx?fromID=167&fromValue=305000http://www.matweb.com/tools/unitconverter.aspx?fromID=167&fromValue=21000http://www.matweb.com/tools/unitconverter.aspx?fromID=167&fromValue=305000http://www.matweb.com/tools/unitconverter.aspx?fromID=167&fromValue=21000http://www.matweb.com/tools/unitconverter.aspx?fromID=167&fromValue=305000http://www.matweb.com/tools/unitconverter.aspx?fromID=167&fromValue=21000http://www.matweb.com/tools/unitconverter.aspx?fromID=167&fromValue=305000http://www.matweb.com/tools/unitconverter.aspx?fromID=167&fromValue=21000http://www.matweb.com/search/GraphConditionalData.aspx?matguid=557b96c10e0843dbb1e830ceedeb35b0&propid=798&sigid=13http://www.matweb.com/tools/unitconverter.aspx?fromID=21&fromValue=508http://www.matweb.com/tools/unitconverter.aspx?fromID=21&fromValue=500http://www.matweb.com/tools/unitconverter.aspx?fromID=22&fromValue=200http://www.matweb.com/tools/unitconverter.aspx?fromID=22&fromValue=197http://www.matweb.com/tools/unitconverter.aspx?fromID=224&fromValue=1.20http://www.matweb.com/tools/unitconverter.aspx?fromID=224&fromValue=0.998http://www.matweb.com/tools/unitconverter.aspx?fromID=223&fromValue=18.6http://www.matweb.com/tools/unitconverter.aspx?fromID=223&fromValue=15.5http://www.matweb.com/tools/unitconverter.aspx?fromID=258&fromValue=50.0http://www.matweb.com/tools/unitconverter.aspx?fromID=258&fromValue=16.0http://www.matweb.com/tools/unitconverter.aspx?fromID=258&fromValue=50.0http://www.matweb.com/tools/unitconverter.aspx?fromID=258&fromValue=16.0http://www.matweb.com/tools/unitconverter.aspx?fromID=150&fromValue=50.0http://www.matweb.com/tools/unitconverter.aspx?fromID=150&fromValue=5.00http://www.matweb.com/tools/unitconverter.aspx?fromID=150&fromValue=50.0http://www.matweb.com/tools/unitconverter.aspx?fromID=150&fromValue=5.00http://www.matweb.com/tools/unitconverter.aspx?fromID=87&fromValue=0.0354http://www.matweb.com/tools/unitconverter.aspx?fromID=87&fromValue=0.0329http://www.matweb.com/tools/unitconverter.aspx?fromID=43&fromValue=0.980http://www.matweb.com/tools/unitconverter.aspx?fromID=43&fromValue=0.910http://www.matweb.com/services/advertising.aspxhttp://www.matweb.com/search/GetVendors.aspx?matguid=557b96c10e0843dbb1e830ceedeb35b0http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=870http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=107http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=15http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=12http://www.matweb.com/Search/MaterialGroupSearch.aspx?GroupID=10
7/30/2019 MaterialData_78247
2/2
Some of the values displayed above may have been converted from
their original units and/or rounded in order to display the
information in a consistent format. Users requiring more precise
data for scientific or
engineering calculations can click on the property value to see
the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw
conversions in your
calculations to minimize rounding error. We also ask that you
refer to MatWeb's disclaimer and terms of use regarding this
information. Click here to view all the property values for this
datasheet as they were
originally entered into MatWeb.
Electrical Properties Metric English Commen
Electrical Resistivity 1.00e+15 - 1.00e+16 ohm-cm 1.00e+15 -
1.00e+16 ohm-cm Average value: 1.69e+15 ohm-cm Grade Count:
Surface Resistance 100 - 1.00e+15 ohm 100 - 1.00e+15 ohm Average
value: 1.74e+14 ohm Grade Count:
Dielectric Constant 2.00 - 2.60 2.00 - 2.60 Average value: 2.33
Grade Count:
Dissipation Factor 0.000200 - 0.00300 0.000200 - 0.00300 Average
value: 0.000509 Grade Count:
Comparative Tracking Index 600 V 600 V Average value: 600 V
Grade Count
Thermal Properties Metric English Commen
CTE, linear 180 - 230 m/m-C 100 - 128 in/in-F Average value: 218
m/m-C Grade Count:
Melting Point 95.0 - 118C 203 - 244 F Average value: 109 C Grade
Count:
Deflection Temperature at 0.46 MPa (66
psi)
40.0 - 50.6 C 104 - 123 F Average value: 42.8 C Grade Count:
Deflection Temperature at 1.8 MPa (264psi)
23.0 - 101 C 73.4 - 214 F Average value: 63.1 C Grade Coun
Vicat Softening Point 52.0 - 117 C 126 - 243 F Average value:
90.0 C Grade Count:1
Brittleness Temperature -85.0 - 40.6 C -121 - 105 F Average
value: -52.1 C Grade Count:
Flammability, UL94 HB HB Grade Count:
Oxygen Index 17.0 - 18.0 % 17.0 - 18.0 % Average value: 17.2 %
Grade Count:
Ring & Ball Softening Point 109 - 130 C 228 - 266 F Average
value: 118 C Grade Coun
Optical Properties Metric English Commen
Haze 3.30 - 20.0 % 3.30 - 20.0 % Average value: 8.09 % Grade
Count:
Gloss 7.80 - 83.0 % 7.80 - 83.0 % Average value: 56.2 % Grade
Count:
Transmission, Visible 50.0 - 95.0 % 50.0 - 95.0 % Average value:
76.4 % Grade Coun
Processing Properties Metric English Commen
Processing Temperature 82.2 - 329 C 180 - 625 F Average value:
182 C Grade Count:
Mold Temperature 15.0 - 65.6 C 59.0 - 150 F Average value: 37.5
C Grade CounInjection Pressure 68.9 - 103 MPa 10000 - 15000 psi
Average value: 86.2 MPa Grade Coun
MatWeb, Your Source for Materials Information - WWW.MATWEB.COM /
Page 2 /
http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=228http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=266http://www.matweb.com/search/datasheet.aspx?matguid=557b96c10e0843dbb1e830ceedeb35b0&n=1http://www.matweb.com/search/datasheet.aspx?matguid=557b96c10e0843dbb1e830ceedeb35b0&n=1http://www.matweb.com/search/datasheet.aspx?matguid=557b96c10e0843dbb1e830ceedeb35b0&n=1http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=15000http://www.matweb.com/tools/unitconverter.aspx?fromID=123&fromValue=10000http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=103http://www.matweb.com/tools/unitconverter.aspx?fromID=108&fromValue=68.9http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=150http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=59.0http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=65.6http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=15.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=625http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=180http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=329http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=82.2http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=266http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=228http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=130http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=109http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=105http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=-121http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=40.6http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=-85.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=243http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=126http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=117http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=52.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=214http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=73.4http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=101http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=23.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=123http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=104http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=50.6http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=40.0http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=244http://www.matweb.com/tools/unitconverter.aspx?fromID=3&fromValue=203http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=118http://www.matweb.com/tools/unitconverter.aspx?fromID=2&fromValue=95.0http://www.matweb.com/tools/unitconverter.aspx?fromID=4&fromValue=128http://www.matweb.com/tools/unitconverter.aspx?fromID=4&fromValue=100http://www.matweb.com/tools/unitconverter.aspx?fromID=5&fromValue=230http://www.matweb.com/tools/unitconverter.aspx?fromID=5&fromValue=180http://www.matweb.com/tools/unitconverter.aspx?fromID=146&fromValue=600http://www.matweb.com/tools/unitconverter.aspx?fromID=146&fromValue=600http://www.matweb.com/tools/unitconverter.aspx?fromID=141&fromValue=1.00e%2b15http://www.matweb.com/tools/unitconverter.aspx?fromID=141&fromValue=100http://www.matweb.com/tools/unitconverter.aspx?fromID=141&fromValue=1.00e%2b15http://www.matweb.com/tools/unitconverter.aspx?fromID=141&fromValue=100http://www.matweb.com/tools/unitconverter.aspx?fromID=115&fromValue=1.00e%2b16http://www.matweb.com/tools/unitconverter.aspx?fromID=115&fromValue=1.00e%2b15http://www.matweb.com/tools/unitconverter.aspx?fromID=115&fromValue=1.00e%2b16http://www.matweb.com/tools/unitconverter.aspx?fromID=115&fromValue=1.00e%2b15
