Sampling Cylinders - · PDF fileProduction Sampling Cylinders. Technical Specification Description & Documentation ... generally in accordance with PD 5500 Service: • UN 1954 Compressed

Sampling Cylinders

Production Sampling Cylinders

Technical Specification

Description & Documentation

Part number A0000269

Net volume 500ccMax. filling pressure 10 000psi

MaterialCylinder/end caps:Inconel 625Valves: Inconel 825

Design temperature range

0°C to 177°C (350°F)

Net weight 24kg approx. (empty)

Dimensions (mm)

Overall length including valves= 447mm (17.6”)Cylinder OD = 79mm (3.1”)

Standard

• - PED, cat III vessel• - PD 5500: 2012• - BS EN14359• - BS EN13445• - BS3076

Option

• Hydrostatic test certificate with 3rd party endorsement

• Material certification to EN10204: 3.1 or 3.2 for main pressure components

• 3rd party inspection release note

The Flow Through type cylinder is used for the collection of liquid and gas samples. Each assembly will consist of one Proserv type sample cylinder, two 1/4” needle valves with NPT female outlets and valve ports fitted NPT plugs. Cylinders are electro etched with a unique cylinder serial number.

Features & Benefits

• Flow-through cylinder complete with Inconel 825 AE valves• Valve inlet/outlet ports: 1/4” NPT female• Main components produced with Inconel 625• Supplied with aluminium transport box• Valves fitted with 316ss 1/4” NPT male plugs

PRODUCTIONPRODUCT SPECIFICATION SHEET

Proserv Inconel 625 Flow Through Sample Cylinder

ingenious simplicity

[email protected]

Design

- 97/23/EC (PED), cat III vessel- PD 5500; 2012- Hydrostatic test certificate in accordance with PED

Service:• UN 1053 – Hydrogen Sulphide gas• UN 1066 – Nitrogen, compressed• UN1075 – Petroleum gasses, liquefied or liquefied petroleum

gasses• UN 1267 – Petroleum Crude Oil• UN 1953 – Compressed gas, toxic, flammable, n.o.s• UN 1954 – Compressed gas, flammable, n.o.s• UN 1964 – Hydrocarbon gas mixtures, compressed, n.o.s• UN 1965 – Hydrocarbon gas mixtures, liquefied, n.o.s• UN 1971 – Methane, compressed, or Natural Gas, compressed



Part number 045317

Net volume 981 cc

Filling pressure 3, 626 psi @ 350.6 FoF(250 Bar @ 177oC. See note 1

Material

Cyl body: ASTM B348 Ti Gr. 5End caps: ASTM B348 Ti Gr. 2Piston: ASTM B348 Ti Gr. 2Mixing ball: AISI 316 St StlMini valves: AISI 316 St Stl

Net weight 8.4 kg

Dimensions (mm)

Cyl length incl valves andpressure gauge = 696Cyl body length = 610Cyl O.D = 72

Standard documentation

Certificate of conformityHydrostatic test certificateUser instructionsUser spare parts listAuthorised inspectorsCertificate of conformance toDOT SP-15404Copy of DOT SP-15404

Option

Hydrostatic test certificate, with 3rd party endorsement, complete with 3rd party inspection release note- Copy of PED EC D of C- Material certification to EN 10204: 3.1 for pressure retaining components- Other type of connections available on request- Ti Gr 6246 for Cyl body andInconel valves (NACE MR 0175/ISO 15156 compliant)- Alternative seal kits

The Profisc sample receiver is a portable single piston sample receiver with one back pressure connection on the secondary end and one product inlet connection and one flush port on the primary end. For collection of samples required for transportation to the analysis laboratory and subsequent storage. Connections are furnished with “mini-valves” with 1/8” AE W125. Secondary side is also furnished with a 63mm 0-250 bar pressure gauge.

Features & Benefits

• Light weight single piston sample receiver with internal mixing ball• Autoclave engineers valves• Outlet port: 1/8” AE W125• Volume indicator• Pressure gauge with range 0-250 bar on back pressure side• Flushing valve• Transportation box (DOT requirement)


Proserv Profisc Ti-250-100-MB-DOT


[email protected]

Design

Approved for use and transport within, and across borders, inEurope and USA under the following European directives and

US special permit:- 97/23/EC (PED)- US DOT SP-15404

Design code: generally in accordance with PD 5500

Service:

• UN 1954 compressed gas, flammable, n.o.s• UN 1964 Hydrocarbon gas mixture, compressed, n.o.s• UN 1965 Hydrocarbon gas mixtures, liquefied, n.o.s• UN 1053 Hydrogen Sulphide (H2S)• UN 3161 liquefied gas, flammable, n.o.s• UN 1971, UN 1972 Natural Gas with Methane Content• UN 1066 Nitrogen, compressed• UN 1267 Petroleum Crude Oil• UN 1075 Petroleum gases, liquefied or liquefied petroleum gas• UN 1006 Argon, compressed• UN 1953 compressed gas, toxic, flammable, n.o.s

NOTE 1: Profisc cylinders include an external magnet tube for level indication. The magnet tube has a maximum operating temperature of 70° C. Although the cylinder metal work is suitable for a temperature of 177° C, the external magnet tube must not be allowed to go above 70° C. In addition the external brackets must not be allowed to go above 100° C.


Description and Documentation

Part number 002993

Net volume 629 cc

Filling pressure 3,626 psi @ 350.6oF (250 bar @ 177oC)

Material


Net weight 6.95 kg

Dimensions (mm)

Cyl length incl valves and pressure gauge = 530Cyl body length = 444Cyl O.D = 72


• Certificate of conformity• Hydrostatic test certificate• User instructions• User spare parts list• Authorised inspectors certificate of

conformance to DOT SP-15404• Copy of DOT SP-15404

Option

• Hydrostatic test certificate, with 3rd party endorsement, complete with 3rd party inspection release note

• Coy of PED EC C of C• Material certification to EN

10204: 3.1 for pressure retaining components

• Other type of connections available on request

• Ti Gr 6246 for Cyl body and Inconel Valves (NACE MR 0175/ISO 15156 compliant)

• Alternative seal kits• Other volumes available

The ProFisc sample receiver is a portable single piston sample receiver with one back pressure connection on the secondary end and one product inlet connection and one flush port on the primary end. For collection of samples required for transportation to the analysis laboratory and subsequent storage. Connections are furnished with “Mini-valves” with 1/8” AE W125. Secondary side is also furnished with a 63mm 0-250 bar pressure gauge.

Features & Benefits

• Light weight single piston sample receiver with internal mixing ball• Autoclave engineers valves• Outlet port: 1/8” AE W125• Volume indicator• Pressure gauge with range 0-250 bar on back pressure side• Flushing valve• Transportation box (DOT requirement)


Proserv Profisc Ti-250-64-MB-DOT


[email protected]

Design

Approved for use and transport within, and across borders, in Europe and USA under the following European directives and US special permit:

• 97/23/EC (PED)• US DOT SP-15404

Design code: generally in accordance with PD 5500

Service

• UN 1954 Compressed gas, flammable, n.o.s• UN 1964 Hydrocarbon gas mixture,

compressed, n.o.s• UN 1965 Hydrocarbon gas mixtures,

liquefied, n.o.s• UN 1053 Hydrogen Sulphide (H2S)• UN 3161 liquefied gas, flammable, n.o.s• UN 1971, UN 1972 Natural Gas with

Methane content• UN 1066 Nitrogen, compressed• UN 1267 Petroleum Crude Oil• UN 1075 Petroleum gases, liquefied or

liquefied Petroleum gas• UN 1006 Argon, compressed• UN 1953 Compressed gas, toxic, flammable,

n.o.s.



Part number 017774

Net volume 1000 ccDesign pressure 10,000 psi at ambient temp.Design temperature -20 to 177oC

Material


Net weight 5.7 kg

Dimensions (mm)

Cyl length incl valves = 660Cyl body length = 610Cyl O.D. = 72


• Certificate of conformity• Hydrostatic test certificate• User instructions• User spare parts list• Authorised inspectors• Certificate of conformance to DOT SP-15404• Copy of DOT SP-15404

Option


• Copy of PED EC D of C• Material Certification to EN 10204: 3.1 for

pressure retaining components• Other type of connections available on request• Ti Gr 6246 for Cyl body• (NACE MR 0175/ISO 15156 compliant)• Alternative valves material• Alternative O-ring seal material

The ProLight sample receiver is a portable single piston sample receiver with an internal mixing ball, double product inlet connections and one back pressure connection. The double inlet connection is suitable as flush connection. Connections are furnished with “mini-valves” with 1/8” AE W125.

Features & Benefits

• Light weight single piston sample receiver with internal mixing ball• Autoclave engineers valves• Outlet port:1/8” AE W125• Transportation box (DOT requirement)


ProLight 690 bar, 1000 cc, PED/DOT, 017774


[email protected]

Design

• Approved for use and transport within, and across borders, in Europe and USA under the following European directives and US special permit: 97/23/EC (PED)

• US DOT SP-15404• Design code: generally in accordance with PD 5500

Service:

• UN 1954 Compressed gas, flammable, n.o.s• UN 1964 Hydrocarbon gas mixture, compressed, n.o.s.• UN 1965 Hydrocarbon gas mixtures, liquefied, n.o.s.• UN 1053 Hydrogen Sulphide (H2S)• UN 3161 liquefied gas, flammable, n.o.s.• UN 1971, UN 1972 Natural Gas with Methane content• UN 1066 Nitrogen, compressed• UN 1267 Petroleum Crude Oil• UN 1075 Petroleum gases, liquefied or liquefied petroleum gas• UN 1006 Argon, compressed• UN 1953 compressed gas, toxic, flammable, n.o.s.



Part number 002990

Net volume 629 ccDesign pressure 10,000 psi at ambient temp.Design temperature -20 to 177oC

Material


Net weight 5.7 kg

Dimensions (mm)

Cyl length incl valves = 487Cyl body length = 444Cyl O.D. = 72


• Certificate of conformity• Hydrostatic test certificate• User instructions• User spare parts list• Authorised inspectors• Certificate of conformance to DOT SP-15404• Copy of DOT SP-15404

Option


• Copy of PED EC D of C• Material certification to EN 10204: 3.1 for

pressure retaining components• Other type of connections available on request• Ti Gr 6246 for Cyl body (NACE MR 0175/ISO

15156 compliant)• Alternative valves material• Alternative O-ring seal material

The ProLight sample receiver is a portable single piston sample receiver withan internal mixing ball, double product inlet connections and one back pressure connection. The double inlet connection is suitable as flush connection. Connections are furnished with “mini-valves” with 1/8” AE W125.

Features & Benefits

• Light weight single piston sample receiver with internal mixing ball• Autoclave engineers valves• Outlet port:1/8” AE W125• Transportation box (DOT requirement)


ProLight 690 bar, 640 cc, PED/DOT, 002990


[email protected]

Design

Approved for use and transport within, and across borders, inEurope and USA under the following European directives and USspecial permit:• - 97/23/EC (PED)• - US DOT SP-15404Design code: generally in accordance with PD 5500

Service:

• UN 1954 Compressed gas, flammable, n.o.s• UN 1964 Hydrocarbon gas mixture, compressed, n.o.s.• UN 1965 Hydrocarbon gas mixtures, liquefied, n.o.s.• UN 1053 Hydrogen Sulphide (H2S)• UN 3161 liquefied gas, flammable, n.o.s.• UN 1971, UN 1972 Natural Gas with Methane Content• UN 1066 Nitrogen, compressed• UN 1267 Petroleum Crude Oil• UN 1075 Petroleum gases, liquefied or liquefied Petroleum Gas• UN 1006 Argon, compressed• UN 1953 compressed gas, toxic, flammable, n.o.s.


Type

Part number PS002CYL

Net volume 20000cc (20l)

Max. filling pressure 200 bar(g) [2900 PSI] at 65oC170 bar(g) [2465 PSI] at 100oC

Design temperature -20 to 100oC (-4 to 212oF)

Material

Cylinder: aluminium alloy AA 6061 T6 grade. Aluminium alloys have been used without restriction on temperature under NACE.Valves: 316L stainless steel compliant to NACE MR-0175

Net weight 29 kg

Dimensions (OD x L) 250 x 980 mm

Burst disc plug Rated to 220 bar @ 100oC [3200PSI @ 212oF]

Proserv’s unique double ended 20 Litre Aluminium Gas Cylinder is the sampling industry standard where large volume surface separator gas samples are required to be taken during well testing.

Features & Benefits

• Angled pattern Ventil valves with 1/4” NPT thread, female ports• One valve is fitted with a fusible plug burst disc port. Cylinder is

supplied with Fusible plug burst disc fitted• Blanking plug available separately• Transportation box available


Proserv 20 Litre Gas Cylinder


[email protected]

Design and documentation

CodeEU directive: 2010/35/EUDepartment of transport USA: DOT-3AL 2900Transport Canada: TC-3ALM 200

Service

• UN 1075 petroleum gases, liquefied• UN 1965 hydrocarbon gas mixture, liquefied,

N.O.S. (Not Otherwise Specified)• UN 1053 compressed gas, toxic, flammable,

N.O.S.• UN 1954 compressed gas, flammable, N.O.S.• UN 1971 natural gas, compressed• UN 1006 argon compressed• UN 1016 carbon monoxide compressed• UN 1046 helium compressed• UN 1049 hydrogen, compressed.• UN 1066 nitrogen, compressedGas mixtures: only when in compliance with the appropriate transport of dangerous goods regulations; (see references)

Standard User instructionsSpare parts list

Certification

Proserv certificate of conformityManufacturing declaration of conformity with DOT-3AL 2900, TC-3ALM 200 & EU directive 2010/35/EU

References

European directives: 2010/35/EU.Health and safety SI 2007 No.1573-Carriage of dangerous goods and use of transportable pressure equipmentCanadian CSA standards B339-02 and B340-02.USA code of federal regulations 49 parts 100 to 185



Part number 045710

Net volume 735 cc

M.A.W.P

5160 PSIG (355 bar)@200°F(93 °C)6000 PSIG (413 bar) @ 100°F (37 °C)

Material

Cyl body: ASTM B348 Ti Gr. 5End caps: ASTM B348 Ti Gr. 2Needle valve: AISI 316 St StlNPT adaptor: AISI 316 St StlParker adaptor & cap: 316 st

Net weight 5.4 kg

Dimensions (mm)Cyl length incl valves = 660Cyl body length = 444Cyl O.D. = 72

Standard documentation - Hydrostatic test certificate- Leak test

Option - Swagelok 1/4”” outlet- Swagelok 6mm Outlet

The ProLight flow through type cylinder is used for collecting liquid and gas samples. Each assembly will consist of one Proserv type sample cylinder, two 1/4” needle valves with NPT female outlets and valve ports fitted with NPT plugs. Cylinders are electro etched with a unique cylinder serial number.

Features & Benefits

• Light weight flow through cylinder• Swagelok needle valves• Outlet 1/4” Parker A-LOK• Transportation box


Proserv ProLight Flow Through Cylinder


[email protected]

Design

- 97/23/EC (PED)Design code: PD 5500:2012

Service

• UN 1954 compressed gas, flammable, n.o.s

• UN 1964 Hydrocarbon gas mixture, compressed, n.o.s

• UN 1965 Hydrocarbon gas mixtures, liquefied, n.o.s

• UN 1053 Hydrogen Sulphide (H2S) – refer to NACE MR 01 75

for limitations• UN 3161 liquefied gas, flammable, n.o.s.• UN 1971, UN 1972 Natural Gas with

Methane Content• UN 1066 Nitrogen, compressed• UN 1267 Petroleum Crude Oil• UN 1075 Petroleum gases, liquefied or

liquefied Petroleum gas• UN 1006 Argon, compressed• UN 1953 compressed gas, toxic,

flammable, n.o.s


Description and documentation

Part number SS-150-50 MB

Net volume 499 cc

M.A.W.P 150 barg @ 65°F

Material

Cyl body: AISI 316End caps & piston: AISI 316Nozzle: AISI 316Retainer pin: W.st 1.4418

Net weight 5.6 kg

Dimensions (mm) 484x150x90


• Hydrostatic test certificate endorsed by DNV

• Users guide• Letter of conformity

Option

• A1 approval• Material certificate: DIN 50049 3.1

on vessel• Certificate of conformity on external

wetted parts• Swagelok needle valves• No mixing ball• Transportation box• Other volumes available

The ProSteel sample receiver is a portable single piston sampling cylinder with one back pressure connection and two product inlet connections, for collection of samples required for transportation to the analysis laboratory and subsequent storage. Connections are furnished with 1/4” NPT female needle valves. Primary and secondary sides are also furnished with a 40mm 0-160 bar pressure gauge.

Features & Benefits

• Light weight single piston sample receiver• Parker needle valves• Outlet ports: 1/4” NPT female• Nozzle on one port on primary side• Pressure gauge with range 0-160 bar on secondary side


Proserv ProSteel SS-150-50 MB


[email protected]

Design

ASME boiler and pressure vessel code VIII, div.2.

Service

• UN 1954 compressed gas, flammable, n.o.s• UN 1971, UN 1972 natural gas with

methane content• UN 1066 nitrogen, compressed• UN 1267 petroleum crude oil• UN 1075 petroleum gases, liquefied or

liquefied petroleum gas• Formation water: water with dissolved salts

in various quantities and compositions



Part number 851620-640

Net volume 629 cc

Filling pressure 10,000psi @ 350.6°F(690 bar @ 177°C)

Material


Net weight 5.7 kg

Dimensions (mm)Cyl length incl valves = 487Cyl body length = 444Cyl O.D. = 72


- Certificate of conformity- Hydrostatic test certificate- User instructions- User spare parts list- Authorised inspectors certificate of conformance to DOT SP-15404- Copy of DOT SP-15404

Option

- Hydrostatic test certificate, with 3rd party endorsement, complete with 3rd party inspection release note- Copy of PED EC D of C- Material certification to EN10204: 3.1 for pressure retaining components- Other type of connections available on request- Ti Gr 6246 for Cyl body(NACE MR 0175/ISO 15156 compliant)- Alternative valves material- Alternative O-ring seal material

The ProLight sample receiver is a portable single piston sample receiver with an internal mixing ball, double product inlet connections and one back pressure connection. The double inlet connection is suitable as flush connection. Connections are furnished with “mini-valves” with 1/8” AE W125.

Features & Benefits

• Light weight single piston sample receiver with internal mixing ball• Autoclave engineers valves• Outlet port: 1/8” AE W125• Transportation box (DOT requirement)


Proserv ProLight Ti-690-64-MB-DOT


[email protected]

Design

Approved for use and transport within, and across borders, inEurope and USA under the following European directives and USspecial permit:• 97/23/EC (PED)• US DOT SP-15404Design code: generally in accordance with PD 5500

Service

- UN 1954 compressed gas, flammable, n.o.s- UN 1964 Hydrocarbon gas mixture, compressed, n.o.s- UN 1965 Hydrocarbon gas mixtures, liquefied, n.o.s- UN 1053 Hydrogen Sulphide (H2S)- UN 3161 liquefied gas, flammable, n.o.s- UN 1971, UN 1972 Natural Gas with Methane content- UN 1066 Nitrogen, compressed- UN 1267 Petroleum Crude Oil- UN 1075 Petroleum gases, liquefied or liquefied petroleum gas- UN 1006 Argon, compressed- UN 1953 compressed gas, toxic, flammable, n.o.s



Part numberSS-1800-300TLSS-1800-500TLSS-1800-1000TL

Net volume300cc500cc1000cc

Maximum allowable filling pressure 1800 PSI (124 bar)

Working temperature -20°c to 65°c

Cylinder material 316L stainless steel Teflon lined

Valves 316L stainless steel body, 1/4” needle valves

Net weight300 ml - 1.09kg (2.4lb)500 ml – 1.37kg (3.03lb)1000 ml – 3.62kg (8.0lb)

Dimensions (mm) - cylinder only (O.D x L)

300 ml – 50mm x 240mm (2in x 5.5in)500 ml – 50mm x 369mm (2in x 14.5in)1000 ml – 101mm x 247mm (4in x 9.75in)

Options Valve configuration with angle pattern valve

Option Independent witness pressure test product certificate by LLOYDS

Code Transportable pressure equipment directive (TPED) 2010/35/EU

Reference BS EN 1964-3 TPED certified cylinder

The Flow Through Sample Cylinder is used for the collection of liquid and gas samples. Each assembly will consist of one Proserv type sample cylinder, two 1/4” needle valves with NPT female outlets. Valve ports fitted NPT plugs. Cylinders are electro etched with a unique cylinder serial number.

Features & Benefits

• Primarily used for taking gas samples• Consists of one Proserv type sample cylinder, two 1/4” needle valves with NPT

female outlets• Cylinders are electro etched with a unique cylinder serial number• Standard valve option is straight pattern needle valves with 1/4” NPT female

ports• Transport boxes available: fibre glass construction with foam inserts, suitable

for onshore or offshore use.• Depending on cylinder size up to two cylinders can be carried in one box• Valve ports fitted with Swagelok male connectors and 1/4” Plugs


Proserv Teflon Coated TPED Flow Through Sample Cylinder


[email protected]

Design

Standard

Hydro pressure test certificate

Proserv certificate of conformity

Manufacturing declaration of conformity with: TPED 2010/35/EU

Service

ArgonNitrogenHeliumCOHydrogenMethaneHydrocarbon gasMixtures

Exploration Sampling Cylinders



Part numberRT-300-FTRT-500-FTRT-1000-FT

Net volume300 cc500 cc1000 cc

Maximum allowable filling pressure 1800 psi (124 bar)

Working temperature -20oc to 93oc

Cylinder material 316L stainless steel

Valves 316L stainless steel body, 1.4” needle valves

Net weight300 cc - 1.09 kg (2.4lb)500 cc - 1.37 kg (3.03lb)1000 cc - 3.62 kg (8.0lb)

Dimensions (mm) - cylinder only (O.D x L)

• 300 cc - 50 mm x 240 mm (2 in x 5.5 in)• 500 cc - 50 mm x 369 mm (2 in x 14.5 in)• 1000 cc - 101 mm x 247 mm (4in x 9.75 in)

Options Valve configuration with angle pattern valve

The Proserv Flow Through Type Cylinder is used for the collection of liquid and gas samples. Each assembly will consist of 1 Proserv type sample cylinder, 2 1/4” needle valves with NPT female outlets and valve ports fitted NPT plugs. Cylinders are electro etched with a unique cylinder serial number.

Features & Benefits

• Primarily used for taking gas samples• Consists of 1 Proserv type sample cylinder, 2 1/4” needle valves with

NPT female outlets and 2 1/4” Swagelok adaptors• Cylinders are electro etched with a unique cylinder serial number• Standard valve option is straight pattern needle valves with 1/4” NPT

female ports• Transport box provided: fibre glass construction with foam inserts,

suitable for onshore or offshore use


Sample Cylinder, Flow Through, Sulfinert, 100 bar


[email protected]

Design

Standard• Hydro pressure test

certificate and leak test certificate

Service

• Argon• Nitrogen• Helium• CO• Hydrogen• Methane• Hydrocarbon gas mixtures




Net volume 700cc

Filling pressure 10,000psi @ 302°F (690 bar @ 150°C)

Material

Cylinder and end caps: 17-4PH St. Stl. (AISI 630) in NACE MR0175 conditionpiston and mixing device: 316 St. Stl. (AISI 316) in NACE MR0175 condition

Net weight 17.5kg (empty) 18.2kg (pre-charged water/glycol)

Dimensions (mm) Overall length=693, cylinder O.D=89 (27.3” X 3.5”)

Standard

Hydrostatic certificateAuthorised inspectors certificate of conformance to DOT SP-12116 and TC equivalency certificate SU9269Copy of DOT SP-12116User instructions and user spare parts list

Option

Hydrostatic certificate, with 3rd party endorsement3rd party inspection release noteMaterial certification to EN 10204: 3.1 or 3.2 for main pressure retaining components500cc and 1000cc volume options availableFully NACE material available for wetted parts

The Type 5 (10K) Sample Cylinder was designed specifically for the task of housing samples transferred from the Proserv downhole sampler, for transportation to the analysis laboratory and subsequent storage. This transportable sampling cylinder is of piston type with two end caps, sealed with double ‘O’ rings and back-up rings.

Features & Benefits

• Single piston sample receiver, with internal mixing device• Sample mixing options of a single mixing ball (Illustrated) or vortex

ring• Evacuation/purging port on sample side of cylinder• Autoclave engineer needle valves fitted• Valve inlet/outlet ports: 1/4” NPT female• Valve protection guards fitted• Supplied with aluminium transportation box


Proserv Type 5 10k 700cc


[email protected]

Design

Approved for use and transport within, and across borders, in Europe, USA and Canada under the following European directives, US special permit and transport Canada equivalency certificate:- 97/23/EC (PED)- US DOT SP-12116- TC equivalency certificate SU9269

Service

• UN 1066 - nitrogen, compressed• UN 1075 - petroleum gases, liquefied or

Liquefied petroleum gases• UN 1267 - petroleum crude oil• UN 1953 - compressed gas, toxic,

flammable, n.o.s.• UN 1954 - compressed gas, flammable,

n.o.s.• UN 1964 - hydrocarbon gases mixtures,

compressed, n.o.s.• UN 1965 - hydrocarbon gases mixtures,

liquefied, n.o.s.• UN 1971 - methane, compressed or natural

gas, compressed




Net volume 700cc


Material

Cylinder and end caps: 17-4PH St. Stl. (AISI 630) in NACE MR0175 conditionPiston and mixing device: 316 St. Stl. (AISI 316) in NACE MR0175 condition

Net weight 21.2kg (empty) 21.9kg (pre-charged water/Glycol)

Dimensions (mm) Overall length=719, cylinder OD=90 (28.3” X 3.6”)

Standard


Option


The Type 5 (15K) sample cylinder was designed specifically for the task of housing samples transferred from the Proserv downhole sampler, for transportation to the analysis laboratory and subsequent storage. Thistransportable sampling cylinder is of piston type with two end caps, sealed with double ‘O’ rings and back-up rings.

Features & Benefits

• Single piston sample receiver, with internal mixing device• Sample mixing options of a single mixing ball or vortex ring• Evacuation/purging port on sample side of cylinder• Autoclave engineer needle valves and valve protection guards fitted• Valve inlet/outlet Ports: 1/4” A.E. medium pressure female• Supplied with Aluminium transportation box




[email protected]

Design


Service

• UN 1066 - Nitrogen, compressed• UN 1075 - Petroleum gases, liquefied or liquefied

Petroleum gases• UN 1267 - Petroleum Crude Oil• UN 1953 - Compressed gas, toxic, flammable,

n.o.s.• UN 1954 - compressed gas, flammable, n.o.s.• UN 1964 - Hydrocarbon gases mixtures,

compressed, n.o.s.• UN 1965 - Hydrocarbon gases mixtures,

liquefied, n.o.s.• UN 1971 - Methane, compressed or Natural Gas,

compressed




Net volume 700cc fluid & 100cc nitrogen


Material

Cylinder and end caps: 17-4PH St. Stl. (AISI 630) in NACE MR0175 conditionPiston and mixing device: 316 St. Stl. (AISI 316) in NACE MR0175 condition

Net weight 22kg (empty) 22.7kg (pre-charged water/glycol)

Dimensions (mm)Cylinder length=720, cylinder O.D=89 (28.4” X 3.5”) length with guards = 810 (32”)

Standard


Option


The Type 6 (10K) Cylinder was designed specifically for the task of housing samples transferred from the Proserv Downhole Sampler, for transportation to the analysis laboratory and subsequent storage.

Features & Benefits

• Single piston sample receiver, with internal vortex ring mixing device• Single phase nitrogen reservoir• Evacuation/purging port on sample side of cylinder• Valve inlet/outlet ports: nitrogen reservoir – 1/4” A.E. medium pressure

female. Sample and pre-charge – 1/4” NPT female• Supplied with aluminium transportation box




[email protected]

Design


Service


liquefied petroleum gases• UN 1267 - petroleum crude oil• UN 1953 - compressed gas, toxic,




liquefied, n.o.s.• UN 1971 - methane, compressed or natural

gas,• compressed




Net volume 700cc fluid & 100cc nitrogen

Filling pressure 15,000psi @ 392°F (1034 bar@ 200°C)

Material

Cylinder and end caps: 17-4PH St. Stl. (AISI 630) in NACE MR0175 conditionpiston and mixing device: 316 St. Stl. (AISI 316) in NACE MR0175 condition

Net weight 24.1kg (empty) 24.8kg (pre-charged water/glycol)

Dimensions (mm)Cylinder length=720, cylinder O.D=91 (28.4” X 3.58”) length with guards = 820 (32.3”)

Standard


Option

Hydrostatic certificate, with 3rd party endorsement3rd party inspection release notematerial certification to EN 10204: 3.1 or 3.2 for main pressure retaining componentsFully NACE material available for wetted parts

The Type 6 (15K) Cylinder was designed specifically for the task housing samples transferred from the Proserv downhole sampler, for transportation to the analysis laboratory and subsequent storage.

Features & Benefits

• Single piston sample receiver, with internal vortex ring mixing device• Single phase nitrogen reservoir• Evacuation/purging port on sample side of cylinder• Autoclave engineer needle valves integral to end caps• Valve inlet/outlet ports:- 1/4” A.E. medium pressure female.• Valve protection guards fitted• Supplied with aluminium transportation box




[email protected]

Design


Service


liquefied petroleum gases• UN 1267 - petroleum crude oil• UN 1953 - compressed gas, toxic,




liquified, n.o.s.• UN 1971 - methane, compressed or natural

gas, compressed

Subsea Sampling Cylinders

Technical specification

Description

Part number 108292

Optional certification

Hydrostatic certificate, with 3rd party endorsement3rd party inspection release noteMaterial certification to EN 10204: 3.1 for main pressure retaining componentsPED declaration of conformity

Net volume 2000cc sample fluid & 500cc Nitrogen

Filling pressure 20,000 psi (1379 bar)

Design temperature -29 to 177°C

Material

Cylinder and end caps: Inconel 725 (UNS N07725) in ANSI/NACE MR0175/ISO 15156 API-6A conditionSample piston and vortex ring: Inconel 625 (UNS N06625) in ANSI/NACE MR0175/ISO 15156 condition Nitrogen piston: 316 stainless steel (UNS S31600)Valves: Inconel 725 and 625 (UNS N07725 & N06625) in ANSI/NACE MR0175/ISO 15156 condition

Service


liquefied petroleum gases • UN 1267 - petroleum crude oil• UN 1953 - compressed gas, toxic, flammable,

n.o.s.• UN 1954 - compressed gas, flammable, n.o.s. • UN 1964 - hydrocarbon gases mixtures,


liquefied, n.o.s. • UN 1971 - methane, compressed or natural gas• UN 1053 – hydrogen sulfide

Net weight 44kg (empty) 46kg (pre-charged water/glycol)

Dimensions Cylinder length = 1341mm (52.8”), Cylinder O.D = 88.9mm (3.5”)

Water depth (maximum) 3,000mApproved for use within Europe under the following European directive:• 2014/68/EU (PED)DOT special permit approval by special requestStandard documentation

Hydrostatic test certificateAPI-6A PR2 certificate of conformity User instructions and user spare parts list

Proserv’s Subsea Sampling Cylinder has been designed to capture representative production fluid samples from a subsea environment and allows transportation directly to a fluid analysis laboratory without any requirement for fluid transfer. This therefore reduces the risk of sample loss, maintains the sample integrity, removes the dangers associated with high pressure hydrocarbon transfer and reduces onsite equipment requirements.

Features & benefits

• Large volume capacity• Can be assembled to suit single phase or conventional sample capture

requirements• Designed in accordance with PED 2014/68/EC & API-6A• Valves qualified to API 6A-PR2• Materials complaint to ANSI/NACE MRO175/ISO 15156• Manufactured from Inconel, suitable for severe service environment

PRODUCTION/SUBSEAPRODUCT SPECIFICATION SHEET

Subsea Sampling Cylinder, Inconel, 2000cc, 20kpsi, PED


[email protected]

Documents

Sampling Cylinders - · PDF fileProduction Sampling Cylinders. Technical Specification Description & Documentation ... generally in accordance with PD 5500 Service: • UN 1954 Compressed